At the moment, all the Minis running Linux have the same MAC
address (00:10:18:00:00:00), which is a bit annoying.
Expose the PCI node corresponding to the Ethernet device, and
declare a 'local-mac-address' property. The bootloader will update
it (m1n1 already has the required feature). And if it doesn't, then
the default value is already present in the DT.
This relies on forcing the bus number for each port so that the
endpoints connected to them are correctly numbered (and keeps dtc
quiet).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Add the interrupt-map properties that are required for INTx
signalling.
Tested-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
PCIe on the Apple M1 (aka t8103) requires the use of IOMMUs (aka
DARTs). Add the three instances that deal with the internal PCIe
ports and route each port's traffic through its DART.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Add node corresponding to the apcie,t8103 node in the
Apple device tree for the Mac mini (M1, 2020).
Power domain references and DART (IOMMU) references are left out
at the moment and will be added once the appropriate bindings have
been settled upon.
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210921183420.436-5-kettenis@openbsd.org
Signed-off-by: Hector Martin <marcan@marcan.st>
Add pinctrl nodes corresponding to the gpio,t8101 nodes in the
Apple device tree for the Mac mini (M1, 2020).
Clock references are left out at the moment and will be added once
the appropriate bindings have been settled upon.
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210520171310.772-3-mark.kettenis@xs4all.nl
Signed-off-by: Hector Martin <marcan@marcan.st>
The RPM and RPMh sleep stats are introduced on a number of platforms, to
aid the enablement of entering low power mode.
The MSM8916 support receives some polishing touches, followed by
introduction of the necessary pieces to use the DeviceTree on 32-bit
variants of the MSM8916 platform, in particular to boot the secondary
CPUs. Based on this support for the Samsung Galaxy S4 Mini Value Edition
is introduced.
The Asus Zenfone 2 Laser gained touchscreen, sensors and sdcard support.
MSM8996 got support for the its crypto hardware and the Xiaomi Mi 5
gained a description of its LCD panel.
The Trogdor device on SC7180 gained support for a second source eDP
brigde, while SC7280 gains PCIe support and the newly introduced
Herobrine device.
Both MSM8916 and SDM845 has their standalong SMEM node dropped, in favour
of the newly introduced support for specifying the compatible directly
on the reserved-memory node.
The SM7225 platform is introduced, as a derrivative of SM6350, initial
support for the PM6350 PMIC and based on this the Fairphone 4 is
introduced.
The RB3 and RB5 devices gains msm-id and board-id, to allow the two DTBs
to be baked into a single boot.img that can be booted on both devices.
As the GDSC driver has been extended to properly describe the
relationship between MMCX and MDSS_GDSC, the now deprecated mmcx
regulator is removed from SM8250.
SM8350 gained CPU topology, idle-states and fastrpc support. FastRPC was
also added for SM8150 and the SA8155p ADP got a couple of remoteprocs
enabled.
Additionally a number of DT validation issues was corrected across the
various platforms and devices.
-----BEGIN PGP SIGNATURE-----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=fQI7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=OHZ9
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DTS additional patches for v5.16
The RPM and RPMh sleep stats are introduced on a number of platforms, to
aid the enablement of entering low power mode.
The MSM8916 support receives some polishing touches, followed by
introduction of the necessary pieces to use the DeviceTree on 32-bit
variants of the MSM8916 platform, in particular to boot the secondary
CPUs. Based on this support for the Samsung Galaxy S4 Mini Value Edition
is introduced.
The Asus Zenfone 2 Laser gained touchscreen, sensors and sdcard support.
MSM8996 got support for the its crypto hardware and the Xiaomi Mi 5
gained a description of its LCD panel.
The Trogdor device on SC7180 gained support for a second source eDP
brigde, while SC7280 gains PCIe support and the newly introduced
Herobrine device.
Both MSM8916 and SDM845 has their standalong SMEM node dropped, in favour
of the newly introduced support for specifying the compatible directly
on the reserved-memory node.
The SM7225 platform is introduced, as a derrivative of SM6350, initial
support for the PM6350 PMIC and based on this the Fairphone 4 is
introduced.
The RB3 and RB5 devices gains msm-id and board-id, to allow the two DTBs
to be baked into a single boot.img that can be booted on both devices.
As the GDSC driver has been extended to properly describe the
relationship between MMCX and MDSS_GDSC, the now deprecated mmcx
regulator is removed from SM8250.
SM8350 gained CPU topology, idle-states and fastrpc support. FastRPC was
also added for SM8150 and the SA8155p ADP got a couple of remoteprocs
enabled.
Additionally a number of DT validation issues was corrected across the
various platforms and devices.
* tag 'qcom-arm64-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (77 commits)
Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors"
arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node
arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property
arm64: dts: qcom: sm8350: Add CPU topology and idle-states
arm64: dts: qcom: Drop unneeded extra device-specific includes
arm64: dts: qcom: msm8916: Drop standalone smem node
arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes
arm64: dts: qcom: msm8916-asus-z00l: Add sensors
arm64: dts: qcom: msm8916-asus-z00l: Add SDCard
arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen
arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node
arm64: dts: qcom: sdm845: Fix Qualcomm crypto engine bus clock
arm64: dts: qcom: msm8996: Add device tree entries to support crypto engine
arm64: dts: qcom: msm8996: move clock-frequency from PN547 NFC to I2C bus
arm64: dts: qcom: msm8916-asus-z00l: Add sensors
arm64: dts: qcom: sdm630: Add disabled Venus support
arm64: dts: qcom: pm660l: Remove board-specific WLED configuration
arm64: dts: qcom: Move WLED num-strings from pmi8994 to sony-xperia-tone
arm64: dts: qcom: pmi8994: Remove hardcoded linear WLED enabled-strings
arm64: dts: qcom: pmi8994: Fix "eternal"->"external" typo in WLED node
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add a 'reg' entry for register-bit-led nodes on the Arm Ltd platforms.
The 'reg' entry is the LED control register address. With this, the node
name can be updated to use a generic node name, 'led', and a
unit-address.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211024232003.211484-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It can be compatible with exynos850's chipid. The SoC has eight chipid
registers that can be used for OTP.
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20211021012017.158919-3-chanho61.park@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
I didn't notice that I already had applied this patch and while this
builds fine one copy is enough.
This reverts commit 22efef1ca0.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
'iface_clk' clock is not used by the
qcom, bam_dma driver, so remove the same from 'ipq6018' dts.
This is a preparatory patch for subsequent patch in
this series which converts the qcom_bam_dma device-tree
binding into YAML format.
Without this change, 'make dtbs_check' leads to the following
error:
$ arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml:
dma-controller@7984000: clock-names: ['iface_clk', 'bam_clk']
is too long
Fix the same.
Cc: Thara Gopinath <thara.gopinath@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211013105541.68045-4-bhupesh.sharma@linaro.org
'qcom,config-pipe-trust-reg' property doesn't seem to be
used by the qcom, bam_dma driver, so remove the same
from 'ipq6018' dts.
This is a preparatory patch for subsequent patch in
this series which converts the qcom_bam_dma device-tree
binding into YAML format.
Without this change, 'make dtbs_check' leads to the following
error:
$ arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml:
dma-controller@704000: 'qcom,config-pipe-trust-reg' does not match
any of the regexes: 'pinctrl-[0-9]+'
Fix the same.
Cc: Thara Gopinath <thara.gopinath@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211013105541.68045-3-bhupesh.sharma@linaro.org
For some reason apq8016-sbc, apq8096-db820c, msm8916-mtp and msm8996-mtp
were added as separate .dts and .dtsi files where the first only contains
the model name and the latter contains most of the actual definitions.
Perhaps this was done with the expectation that there would be other
devices also making use of exactly the same. However, this has not
been the case until now and it also seems unlikely in the future.
Having the extra .dtsi only clutters the file list and provides
little benefit.
Move the contents of the .dtsi into the .dts file to make this consistent
with most other devices that simply define everything in the .dts.
There are no functional changes introduced by this patch:
The compiled ".dtb"s are completely identical.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211018133656.32649-1-stephan@gerhold.net
SMEM can now be described directly in the reserved-memory.
This is mainly meant for newer SoCs where there is only one SMEM
region. However, even on older SoCs like MSM8916 there is clearly one
main SMEM region (described by "memory-region") that holds the
smem_header and one special extra region used only for data of the
RPM ("qcom,rpm-msg-ram").
The definition in reserved-memory also looks cleaner for older SoCs,
so make use of that in MSM8916 as well.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211018110009.30837-2-stephan@gerhold.net
According to the new DT schema for qcom,rpm-msg-ram the node name
should be sram@. memory@ is reserved for definition of physical RAM
(usable by Linux).
This fixes the following dtbs_check error on various device trees:
memory@60000: 'device_type' is a required property
From schema: dtschema/schemas/memory.yaml
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211018110009.30837-1-stephan@gerhold.net
This device has MPU-6515 imu and Asahi Kasei AK09911 magnetometer,
Add support for it.
Signed-off-by: J.R. Divya Antony <d.antony.jr@gmail.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211012112735.2765-3-d.antony.jr@gmail.com
Add support for touchscreen in this device.
Signed-off-by: J.R. Divya Antony <d.antony.jr@gmail.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211012112735.2765-1-d.antony.jr@gmail.com
The change corrects the described bus clock of the QCE.
Fixes: 3e482859f1 ("dts: qcom: sdm845: Add dt entries to support crypto engine.")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211011095534.1580406-1-vladimir.zapolskiy@linaro.org
The change adds description of Qualcomm crypto engine controller and
BAM associated with it. The change is inspired by commit 3e482859f1
("dts: qcom: sdm845: Add dt entries to support crypto engine.")
While performance of cryptographic algorithms executed on QCE is lower
than e.g. ones tinkered for ARM NEON, the offloaded execution would
make sense:
# cryptsetup benchmark | grep aes
aes-cbc 128b 71.0 MiB/s 71.9 MiB/s
aes-cbc 256b 62.4 MiB/s 62.4 MiB/s
aes-xts 256b 70.7 MiB/s 70.8 MiB/s
aes-xts 512b 62.0 MiB/s 63.3 MiB/s
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Cc: Thara Gopinath <thara.gopinath@linaro.org>
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211011094822.1580122-1-vladimir.zapolskiy@linaro.org
Although the early NXP NCI NFC bindings required the clock-frequency
property, it was never used by the driver and it is actually a property
of I2C bus, not I2C slave.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211011073143.32645-1-krzysztof.kozlowski@canonical.com
This device has MPU-6515 imu and Asahi Kasei AK09911 magnetometer.
Add support for it.
Signed-off-by: J.R. Divya Antony <d.antony.jr@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211010033750.15204-1-d.antony.jr@gmail.com
Add support for the Venus video decoder/encoder but leave it disabled
by default; it is expected to eventually get enabled in each machine
specific DT, where required.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211008102119.268869-3-angelogioacchino.delregno@collabora.com
This string- and electrical configuration depend on the board and panel,
and should hence not be defined generically for every user of pm660l.
SoMainline will pick this configuration again when enabling WLED on the
Sony Nile platform.
Fixes: 7b56a804e5 ("arm64: dts: qcom: pm660l: Add WLED support")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007213400.258371-14-marijn.suijten@somainline.org
The number of WLED strings used by a certain platform depend on the
panel connected to that board and may not be the same for every user of
pmi8994.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007213400.258371-13-marijn.suijten@somainline.org
The driver now sets an appropriate default for WLED4 (and WLED5) just
like WLED3 making this linear array from 0-3 redundant. In addition the
driver is now able to parse arrays of variable length solving the "all
four strings *have to* be defined" comment.
Besides the driver will now warn when both properties are specified to
prevent ambiguity: the length of the array is enough to imply a set
number of strings.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007213400.258371-12-marijn.suijten@somainline.org
The property is named "qcom,external-pfet", as found by
dt_binding_check:
'qcom,eternal-pfet' does not match any of the regexes
Fixes: 37aa540cbd ("arm64: dts: qcom: pmi8994: Add WLED node")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007213400.258371-11-marijn.suijten@somainline.org
Herobrine is a Chrome OS board/platform based on the QCA SC7280.
Add a .dtsi for the platform parts and a .dts for the board
specific bits. Currently the .dtsi has everything except the
compatible strings, things will likely get shuffled around in the
future as we learn more about the differences between boards.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007140854.1.I70615769f27bbaf7e480419d0f660f802b1fea43@changeid
The 'interrupt-map' in several QCom SoCs is malformed. The '#address-cells'
size of the parent interrupt controller (the GIC) is not accounted for.
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210928192210.1842377-1-robh@kernel.org
Per QMP PHY bindings schema, 'vdda-phy-supply' and 'vdda-phy-supply' are
required for IPQ8074 QMP USB3 PHY. Since supplies are not added in DTS
for this platform, add a dummy regulator as the supply to QMP USB3 PHY,
so that dtbs_check stops complaining the missing supplies.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-10-shawn.guo@linaro.org
IPQ8074 PCIe PHY nodes are broken in the many ways:
- '#address-cells', '#size-cells' and 'ranges' are missing.
- Child phy/lane node is missing, and the child properties like
'#phy-cells' and 'clocks' are mistakenly put into parent node.
- The clocks properties for parent node are missing.
Fix them to get the nodes comply with the bindings schema.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-9-shawn.guo@linaro.org
'vdda-phy-supply' and 'vdda-pll-supply' are required properties. Add
them to fix the dtbs_check warnings below.
phy@1da7000: 'vdda-phy-supply' is a required property
arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml
phy@1da7000: 'vdda-pll-supply' is a required property
arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-8-shawn.guo@linaro.org
The 'reg-names' is not a supported/used property. Drop it from QMP PHY
nodes to fix dtbs_check warnings like below.
phy-wrapper@88e9000: 'reg-names' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/sm8350-hdk.dt.yaml
arch/arm64/boot/dts/qcom/sm8350-mtp.dt.yaml
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-7-shawn.guo@linaro.org
The following properties are not supported and causing dtbs_check
warnings.
- vdda-phy-max-microamp
- vdda-pll-max-microamp
- vddp-ref-clk-max-microamp
- vddp-ref-clk-always-on
Drop them from QMP PHY nodes.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-6-shawn.guo@linaro.org
Many child nodes of QMP PHY are named without following bindings schema
and causing dtbs_check warnings like below.
phy@1c06000: 'lane@1c06800' does not match any of the regexes: '^phy@[0-9a-f]+$'
arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dt.yaml
Correct them to fix the warnings.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-5-shawn.guo@linaro.org
'#clock-cells' is a required property of QMP PHY child node, not itself.
Move it to fix the dtbs_check warnings.
There are only '#clock-cells' removal from SM8350 QMP PHY nodes, because
child nodes already have the property.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-4-shawn.guo@linaro.org
Add 200MHz OPP in qspi_opp_table
Signed-off-by: Rajesh Patil <rajpat@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1632892123-11006-1-git-send-email-rajpat@codeaurora.org
The RTC on the pmk8350 is not useful on all boards. Some boards may
not provide backup power to the PMIC but might have another RTC on the
board that does have backup power. In this case it's better to not use
the RTC on the PMIC.
At the moment, the only boards that includes this PMIC are sc7280-idp
and sc7280-idp2. On sc7280-idp I'm not aware of any other RTCs, but
sc7280-idp2 has a Chrome OS EC on it and this is intended to provide
the RTC for the AP.
Let's do what we normally do for hardware that's not used by all
boards and set it to a default status of "disabled" and then enable it
on the boards that need it.
NOTE: for sc7280-idp it's _possible_ we might also want to add
`allow-set-time;`. That could be the subject of a future patch if it
is indeed true.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Satya Priya <skakit@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
[bjorn: Enable the RTC on the MTP as well]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929153553.1.Ib44c2ac967833d7a3f51452d44d15b7b8d23c1f0@changeid
Add node to support the QUP5 I2C controller inside of IPQ8074.
It is exactly the same as QUP2 controllers.
Some routers like ZTE MF269 use this bus.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211001145421.18302-1-amadeus@jmu.edu.cn
Add qcom,msm-id and qcom,board-id for Robotics Board RB5.
This will help us boot the device with newer Android boot
image header versions, which package dtb separately
instead of the default Image.gz-dtb (appended dtb) format.
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210930185742.117928-2-amit.pundir@linaro.org
Add qcom,msm-id and qcom,board-id for Dragonboard 845c.
This will help us boot the device with newer Android boot
image header versions, which package dtb separately
instead of the default Image.gz-dtb (appended dtb) format.
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210930185742.117928-1-amit.pundir@linaro.org
Almost any board that boots and has a way to interact with it
(say for the rare cases of just-pstore or let's-rely-on-bootloader-setup)
needs to set some GPIOs, so it makes no sense to include gpio.h separately
each time. Hence move it to SoC DTSI.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211002001358.45920-6-konrad.dybcio@somainline.org
Add the aforementioned properties in the SoC DTSI so that everybody doesn't
have to copy that into their device DTs, effectively reducing code
duplication.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211002001358.45920-5-konrad.dybcio@somainline.org
DPU/MDSS is borderline useless without MDP, so disabling
both of them makes little sense. With this change, enabling
mdss will be enough.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211002001358.45920-4-konrad.dybcio@somainline.org
