Add support for RSEQ, restartable sequences, for RISC-V. This also adds
support for the related selftests.
Note: the selftests require a linker with 3e7bd7f2414 ("RISC-V: Fix
linker problems with tls copy relocs."), which was first released in
2.33 (from 2019).
* palmer/riscv-rseq:
rseq/selftests: Add support for RISC-V
RISC-V: Add support for restartable sequence
Add support for RISC-V in the rseq selftests, which covers both
64-bit and 32-bit ISA with little endian mode.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Tested-by: Eric Lin <eric.lin@sifive.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add calls to rseq_signal_deliver() and rseq_syscall() to introduce RSEQ
support.
1. Call the rseq_signal_deliver() function to fixup on the pre-signal
frame when a signal is delivered on top of a restartable sequence
critical section.
2. Check that system calls are not invoked from within rseq critical
sections by invoking rseq_signal() from ret_from_syscall(). With
CONFIG_DEBUG_RSEQ, such behavior results in termination of the
process with SIGSEGV.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This series improves perf support for RISC-V based system using SBI PMU
and Sscofpmf extensions, by adding a new generic RISC-V perf framework
along with a pair of drivers: one that usese the new
performance-monitoring extensions and one that keeps support for the
existing systems that only have the legacy counters.
Tested-by: Nikita Shubin <n.shubin@yadro.com>
* palmer/riscv-pmu:
MAINTAINERS: Add entry for RISC-V PMU drivers
Documentation: riscv: Remove the old documentation
RISC-V: Add sscofpmf extension support
RISC-V: Add perf platform driver based on SBI PMU extension
RISC-V: Add RISC-V SBI PMU extension definitions
RISC-V: Add a simple platform driver for RISC-V legacy perf
RISC-V: Add a perf core library for pmu drivers
RISC-V: Add CSR encodings for all HPMCOUNTERS
RISC-V: Remove the current perf implementation
The existing pmu documentation describes the limitation of perf
infrastructure in RISC-V ISA and limited feature set of perf in RISC-V.
However, SBI PMU extension and sscofpmf extension(ISA extension) allows to
implement most of the required features of perf. Remove the old
documentation which is not accurate anymore.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The sscofpmf extension allows counter overflow and filtering for
programmable counters. Enable the perf driver to handle the overflow
interrupt. The overflow interrupt is a hart local interrupt.
Thus, per cpu overflow interrupts are setup as a child under the root
INTC irq domain.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
RISC-V SBI specification added a PMU extension that allows to configure
start/stop any pmu counter. The RISC-V perf can use most of the generic
perf features except interrupt overflow and event filtering based on
privilege mode which will be added in future.
It also allows to monitor a handful of firmware counters that can provide
insights into firmware activity during a performance analysis.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch adds all the definitions defined by the SBI PMU extension.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The old RISC-V perf implementation allowed counting of only
cycle/instruction counters using perf. Restore that feature by implementing
a simple platform driver under a separate config to provide backward
compatibility. Any existing software stack will continue to work as it is.
However, it provides an easy way out in future where we can remove the
legacy driver.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Implement a perf core library that can support all the essential perf
features in future. It can also accommodate any type of PMU implementation
in future. Currently, both SBI based perf driver and legacy driver
implemented uses the library. Most of the common perf functionalities
are kept in this core library wile PMU specific driver can implement PMU
specific features. For example, the SBI specific functionality will be
implemented in the SBI specific driver.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Linux kernel can directly read these counters as the HPMCOUNTERS CSRs are
accessible in S-mode.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The current perf implementation in RISC-V is not very useful as it can not
count any events other than cycle/instructions. Moreover, perf record
can not be used or the events can not be started or stopped.
Remove the implementation now for a better platform driver in future
that will implement most of the missing functionality.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This series implements a generic framework to parse multi-letter ISA
extensions.
* palmer/riscv-isa:
RISC-V: Improve /proc/cpuinfo output for ISA extensions
RISC-V: Do no continue isa string parsing without correct XLEN
RISC-V: Implement multi-letter ISA extension probing framework
RISC-V: Extract multi-letter extension names from "riscv, isa"
RISC-V: Minimal parser for "riscv, isa" strings
RISC-V: Correctly print supported extensions
Currently, the /proc/cpuinfo outputs the entire riscv,isa string which
is not ideal when we have multiple ISA extensions present in the ISA
string. Some of them may not be enabled in kernel as well.
Same goes for the single letter extensions as well which prints the
entire ISA string. Some of they may not be valid ISA extensions as
well (e.g 'su')
Parse only the valid & enabled ISA extension and print them.
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The isa string should begin with either rv64 or rv32. Otherwise, it is
an incorrect isa string. Currently, the string parsing continues even if
it doesnot begin with current XLEN.
Fix this by checking if it found "rv64" or "rv32" in the beginning.
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Multi-letter extensions can be probed using exising
riscv_isa_extension_available API now. It doesn't support versioning
right now as there is no use case for it.
Individual extension specific implementation will be added during
each extension support.
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, there is no usage for version numbers in extensions as
any ratified non base ISA extension will always at v1.0.
Extract the extension names in place for future parsing.
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
[Improved commit text and comments]
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Current hart ISA ("riscv,isa") parser don't correctly parse:
1. Multi-letter extensions
2. Version numbers
All ISA extensions ratified recently has multi-letter extensions
(except 'H'). The current "riscv,isa" parser that is easily confused
by multi-letter extensions and "p" in version numbers can be a huge
problem for adding new extensions through the device tree.
Leaving it would create incompatible hacks and would make "riscv,isa"
value unreliable.
This commit implements minimal parser for "riscv,isa" strings. With this,
we can safely ignore multi-letter extensions and version numbers.
[Improved commit text and fixed a bug around 's' in base extension]
Signed-off-by: Atish Patra <atishp@rivosinc.com>
[Fixed workaround for QEMU]
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This commit replaces BITS_PER_LONG with number of alphabet letters.
Current ISA pretty-printing code expects extension 'a' (bit 0) through
'z' (bit 25). Although bit 26 and higher is not currently used (thus never
cause an issue in practice), it will be an annoying problem if we start to
use those in the future.
This commit disables printing high bits for now.
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Rewrote the RISC-V memmove() assembly implementation. The
previous implementation did not check memory alignment and it
compared 2 pointers with a signed comparison. The misaligned
memory access would cause the kernel to crash on systems that
did not emulate it in firmware and did not support it in hardware.
Firmware emulation is slow and may not exist. The RISC-V spec
does not guarantee that support for misaligned memory accesses
will exist. It should not be depended on.
This patch now checks for XLEN granularity of co-alignment between
the pointers. Failing that, copying is done by loading from the 2
contiguous and naturally aligned XLEN memory locations containing
the overlapping XLEN sized data to be copied. The data is shifted
into the correct place and binary or'ed together on each
iteration. The result is then stored into the corresponding
naturally aligned XLEN sized location in the destination. For
unaligned data at the terminations of the regions to be copied
or for copies less than (2 * XLEN) in size, byte copy is used.
This patch also now uses unsigned comparison for the pointers and
migrates to the newer assembler annotations from the now deprecated
ones.
Signed-off-by: Michael T. Kloos <michael@michaelkloos.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This series updates the Microchip Icicle Kit device tree by adding a
host of peripherals, and some updates to the memory map. In addition,
the device tree has been split into a third part, which contains "soft"
peripherals that are in the fpga fabric.
Several of the entries are for peripherals that have not get had their
drivers upstreamed, so in those cases the dt bindings are included where
appropriate in order to avoid the many "DT compatible string <x> appears
un-documented" errors.
* palmer/riscv-microchip:
MAINTAINERS: update riscv/microchip entry
riscv: dts: microchip: add new peripherals to icicle kit device tree
riscv: dts: microchip: update peripherals in icicle kit device tree
riscv: dts: microchip: refactor icicle kit device tree
riscv: dts: microchip: add fpga fabric section to icicle kit
riscv: dts: microchip: use clk defines for icicle kit
dt-bindings: pwm: add microchip corepwm binding
dt-bindings: gpio: add bindings for microchip mpfs gpio
dt-bindings: rtc: add bindings for microchip mpfs rtc
dt-bindings: soc/microchip: add info about services to mpfs sysctrl
dt-bindings: soc/microchip: update syscontroller compatibles
dt-bindings: clk: microchip: Add Microchip PolarFire host binding
Update the RISC-V/Microchip entry by adding the microchip dts
directory and myself as maintainer
Reviewed-by: Lewis Hanly <lewis.hanly@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add new peripherals to the MPFS, and enable them in the Icicle kit
device tree:
2x SPI, QSPI, 3x GPIO, 2x I2C, Real Time Counter, PCIE controller,
USB host & system controller.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Assorted minor changes to the MPFS/Icicle kit device tree:
- enable mmuart4 instead of mmuart0
- remove sifive pdma
- split memory node to match updated fpga design
- move stdout path to serial1 to avoid collision with
bootloader running on the e51
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Split the device tree for the Microchip MPFS into two sections by adding
microchip-mpfs-fabric.dtsi, which contains peripherals contained in the
FPGA fabric.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Update the Microchip Icicle kit device tree by replacing clock
related magic numbers with their defined counterparts.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add device tree bindings for the real time clock on
the Microchip PolarFire SoC.
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The services actually provided by the system controller are not
documented so add some words about what the system controller can
actually do. Add a link to the oneline documentation with the specific
details of each individual service.
Also, drop the unneeded label from the example.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The Polarfire SoC is currently using two different compatible string
prefixes. Fix this by changing "polarfire-soc-*" strings to "mpfs-*" in
its system controller in order to match the compatible string used in
the soc binding and device tree
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This implements Sv57 support at runtime. The kernel will try to boot
with 5-level page table firstly , and will fallback to 4-level if the HW
does not support it. And it will finally fallback to 3-level if the HW
alse does not support sv48.
* riscv-sv57:
riscv: mm: Support kasan for sv57
riscv: mm: Set sv57 on defaultly
riscv: mm: Prepare pt_ops helper functions for sv57
riscv: mm: Control p4d's folding by pgtable_l5_enabled
This patchset add kasan_populate and kasan_shallow_populate for sv57,
and is tested on both qemu and unmatched with CONFIG_KASAN and
CONFIG_KASAN_VMALLOC on.
Signed-off-by: Qinglin Pan <panqinglin2020@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch sets sv57 on defaultly if CONFIG_64BIT. And do fallback to try
to set sv48 on boot time if sv57 is not supported in current hardware.
Signed-off-by: Qinglin Pan <panqinglin2020@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch prepare some pt_ops helper functions which will be used in
creating sv57 mappings during boot time.
Signed-off-by: Qinglin Pan <panqinglin2020@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
To determine pgtable level at boot time, we can not use helper functions
in include/asm-generic/pgtable-nop4d.h and must implement these
functions. This patch uses pgtable_l5_enabled variable instead of
including pgtable-nop4d.h to controle p4d's folding, and implements
corresponding helper functions.
Signed-off-by: Qinglin Pan <panqinglin2020@iscas.ac.cn>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
satp_mode is never modified after init, so it can be marked as
__ro_after_init.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
- Fix printing 'phys_addr' in 'perf script'.
- Fix failure to add events with 'perf probe' in ppc64 due to not removing
leading dot (ppc64 ABIv1).
- Fix cpu_map__item() python binding building.
- Support event alias in form foo-bar-baz, add pmu-events and parse-event tests
for it.
- No need to setup affinities when starting a workload or attaching to a pid.
- Use path__join() to compose a path instead of ad-hoc snprintf() equivalent.
- Override attr->sample_period for non-libpfm4 events.
- Use libperf cpumap APIs instead of accessing the internal state directly.
- Sync x86 arch prctl headers and files changed by the new
set_mempolicy_home_node syscall with the kernel sources.
- Remove duplicate include in cpumap.h.
- Remove redundant err variable.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYeytiAAKCRCyPKLppCJ+
JyxZAQDNopdDHXLcUaa2Yp8M97QZQ31APY4vOSkn+AneVuBxvAEAs+BPCyBKWCHA
o45Hit7BzOtb3erHN5XVLTNW3WNBIQM=
=RdC6
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Fix printing 'phys_addr' in 'perf script'.
- Fix failure to add events with 'perf probe' in ppc64 due to not
removing leading dot (ppc64 ABIv1).
- Fix cpu_map__item() python binding building.
- Support event alias in form foo-bar-baz, add pmu-events and
parse-event tests for it.
- No need to setup affinities when starting a workload or attaching to
a pid.
- Use path__join() to compose a path instead of ad-hoc snprintf()
equivalent.
- Override attr->sample_period for non-libpfm4 events.
- Use libperf cpumap APIs instead of accessing the internal state
directly.
- Sync x86 arch prctl headers and files changed by the new
set_mempolicy_home_node syscall with the kernel sources.
- Remove duplicate include in cpumap.h.
- Remove redundant err variable.
* tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf tools: Remove redundant err variable
perf test: Add parse-events test for aliases with hyphens
perf test: Add pmu-events test for aliases with hyphens
perf parse-events: Support event alias in form foo-bar-baz
perf evsel: Override attr->sample_period for non-libpfm4 events
perf cpumap: Remove duplicate include in cpumap.h
perf cpumap: Migrate to libperf cpumap api
perf python: Fix cpu_map__item() building
perf script: Fix printing 'phys_addr' failure issue
tools headers UAPI: Sync files changed by new set_mempolicy_home_node syscall
tools headers UAPI: Sync x86 arch prctl headers with the kernel sources
perf machine: Use path__join() to compose a path instead of snprintf(dir, '/', filename)
perf evlist: No need to setup affinities when disabling events for pid targets
perf evlist: No need to setup affinities when enabling events for pid targets
perf stat: No need to setup affinities when starting a workload
perf affinity: Allow passing a NULL arg to affinity__cleanup()
perf probe: Fix ppc64 'perf probe add events failed' case
The latest merge of the tracing tree sorts the mcount table at build time.
But s390 appears to do things differently (like always) and replaces the
sorted table back to the original unsorted one. As the ftrace algorithm
depends on it being sorted, bad things happen when it is not, and s390
experienced those bad things.
Add a new config to tell the boot if the mcount table is sorted or not,
and allow s390 to opt out of it.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYezl+RQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qs5wAQCO2K1uB+XI4rown8zKLrGxOiFIXChi
Ds5GKJwYlcOnwQEAqKK3mAodmMy6ydbeY1OY1IDdTkOCAd752FDIe1Qozws=
=aF8W
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace fix from Steven Rostedt:
"Fix s390 breakage from sorting mcount tables.
The latest merge of the tracing tree sorts the mcount table at build
time. But s390 appears to do things differently (like always) and
replaces the sorted table back to the original unsorted one. As the
ftrace algorithm depends on it being sorted, bad things happen when it
is not, and s390 experienced those bad things.
Add a new config to tell the boot if the mcount table is sorted or
not, and allow s390 to opt out of it"
* tag 'trace-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix assuming build time sort works for s390
To speed up the boot process, as mcount_loc needs to be sorted for ftrace
to work properly, sorting it at build time is more efficient than boot up
and can save milliseconds of time. Unfortunately, this change broke s390
as it will modify the mcount_loc location after the sorting takes place
and will put back the unsorted locations. Since the sorting is skipped at
boot up if it is believed that it was sorted at run time, ftrace can crash
as its algorithms are dependent on the list being sorted.
Add a new config BUILDTIME_MCOUNT_SORT that is set when
BUILDTIME_TABLE_SORT but not if S390 is set. Use this config to determine
if sorting should take place at boot up.
Link: https://lore.kernel.org/all/yt9dee51ctfn.fsf@linux.ibm.com/
Fixes: 72b3942a17 ("scripts: ftrace - move the sort-processing in ftrace_init")
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Bring include/uapi/linux/nfc.h into the UAPI compile-test coverage
- Revert the workaround of CONFIG_CC_IMPLICIT_FALLTHROUGH
- Fix build errors in certs/Makefile
-----BEGIN PGP SIGNATURE-----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=9xMF
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Bring include/uapi/linux/nfc.h into the UAPI compile-test coverage
- Revert the workaround of CONFIG_CC_IMPLICIT_FALLTHROUGH
- Fix build errors in certs/Makefile
* tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
certs: Fix build error when CONFIG_MODULE_SIG_KEY is empty
certs: Fix build error when CONFIG_MODULE_SIG_KEY is PKCS#11 URI
Revert "Makefile: Do not quote value for CONFIG_CC_IMPLICIT_FALLTHROUGH"
usr/include/Makefile: add linux/nfc.h to the compile-test coverage
-----BEGIN PGP SIGNATURE-----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=RKW4
-----END PGP SIGNATURE-----
Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- introduce for_each_set_bitrange()
- use find_first_*_bit() instead of find_next_*_bit() where possible
- unify for_each_bit() macros
* tag 'bitmap-5.17-rc1' of git://github.com/norov/linux:
vsprintf: rework bitmap_list_string
lib: bitmap: add performance test for bitmap_print_to_pagebuf
bitmap: unify find_bit operations
mm/percpu: micro-optimize pcpu_is_populated()
Replace for_each_*_bit_from() with for_each_*_bit() where appropriate
find: micro-optimize for_each_{set,clear}_bit()
include/linux: move for_each_bit() macros from bitops.h to find.h
cpumask: replace cpumask_next_* with cpumask_first_* where appropriate
tools: sync tools/bitmap with mother linux
all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate
cpumask: use find_first_and_bit()
lib: add find_first_and_bit()
arch: remove GENERIC_FIND_FIRST_BIT entirely
include: move find.h from asm_generic to linux
bitops: move find_bit_*_le functions from le.h to find.h
bitops: protect find_first_{,zero}_bit properly
Return value from perf_event__process_tracing_data() directly instead
of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20220112080109.666800-1-chi.minghao@zte.com.cn
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test which allows us to test parsing an event alias with hyphens.
Since these events typically do not exist on most host systems, add the
alias to the fake pmu.
Function perf_pmu__test_parse_init() has terms added to match known test
aliases.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-4-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test for aliases with hyphens in the name to ensure that the
pmu-events tables are as expects. There should be no reason why these sort
of aliases would be treated differently, but no harm in checking.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1642432215-234089-3-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
