fwnode matching was designed to match on nodes corresponding to a
device. Some drivers, however, needed to match on endpoints, and have
passed endpoint fwnodes to v4l2-async. This works when both the subdev
and the notifier use the same fwnode types (endpoint or device), but
makes drivers that use different types incompatible.
Fix this by extending the fwnode match to handle fwnodes of different
types. When the types (deduced from the presence of remote endpoints)
are different, retrieve the device fwnode for the side that provides an
endpoint fwnode, and compare it with the device fwnode provided by the
other side. This allows interoperability between all drivers, regardless
of which type of fwnode they use for matching.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Drivers may need to test if a fwnode is a graph endpoint. To avoid
hand-written solutions that wouldn't work for all fwnode types, add a
new fwnode_graph_is_endpoint() function for this purpose. We don't need
to wire it up to different backends for OF and ACPI for now, as the
implementation can simply be based on checkout the presence of a
remote-endpoint property.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The RDACM20 is a GMSL camera supporting 1280x800 resolution images
developed by IMI based on an Omnivision 10635 sensor and a Maxim MAX9271
GMSL serializer.
The GMSL link carries power, control (I2C) and video data over a
single coax cable.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The IMI RDACM20 and IMI RDACM21 are Gigabit Multimedia Serial Link
(GMSL) camera capable of transmitting video and I2C control messages on
a coax cable physical link for automotive applications.
Document their device tree bindings.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The MAX9286 is a 4-channel GMSL deserializer with coax or STP input and
CSI-2 output. The device supports multicamera streaming applications,
and features the ability to synchronise the attached cameras.
CSI-2 output can be configured with 1 to 4 lanes, and a control channel
is supported over I2C, which implements an I2C mux to facilitate
communications with connected cameras across the reverse control
channel.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The MAX9286 deserializes video data received on up to 4 Gigabit
Multimedia Serial Links (GMSL) and outputs them on a CSI-2 port using up
to 4 data lanes.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a V4L2 sub-device driver for DW9768 voice coil motor,
providing control to set the desired focus via IIC serial interface.
Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This fixes checkpatch warnings of "msleep < 20ms can sleep for up to 20ms".
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently the 'pads' and 'pad_cfg' arrays of the rkisp1_resizer
are of size 'RKISP1_ISP_PAD_MAX' which is 4. But the resizer
has only two pads. Change the size of the arrays to 2 by adding
and using 'RKISP1_RSZ_PAD_MAX' similar to the way it is done in
the isp entity.
[hverkuil: fix typos in commit log]
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The field alloc_ctx in struct rkisp1_device is not used.
This patch removes it.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The field ctrl_handler in struct rkisp1_device is not used.
This patch removes it.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The function 'rkisp1_stream_start' calls 'rkisp1_handle_buffer'
in order to update the 'buf.curr' and 'buf.next' fields and
configure the device before streaming starts. This cause a wrong
increment of the debugs field 'frame_drop'. This patch replaces
the call to 'rkisp1_handle_buffer' with a call to
'rkisp1_set_next_buf'.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The function 'rkisp1_set_next_buf' configures the registers
according to 'cap->buf.next'. It is called after updating
'cap->buf.next' and 'cap->buf.curr'. This patch moves the
code that updates those fields to rkisp1_set_next_buf.
This is a preparation for later patch that change a call to
'rkisp1_handle_buffer' with a call to 'rkisp1_set_next_buf'.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The spinlock buf.lock should protect access to the buffers.
This includes the buffers in buf.queue and also buf.curr and
buf.next. The function 'rkisp1_set_next_buf' access buf.next
therefore it should also be protected with the lock.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The function 'rkisp1_vb2_buf_queue' sets the next buffer directly
in case the capture is already streaming but no frame yet arrived
from the sensor. This is an optimization that tries to avoid
dropping a frame.
The call atomic_read(&cap->rkisp1->isp.frame_sequence) is used
to check if a frame arrived. Reading the 'frame_sequence' should
be avoided outside irq handlers to avoid race conditions.
This patch removes this optimization. Dropping of the first
frames can be avoided if userspace queues the buffers before
start streaming. If userspace starts queueing buffers
only after calling 'streamon' he risks frame drops anyway.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Encode messages as necessary for the firmware 2019.2 and, thus, support
the more recent firmware version in the driver, too.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In order to distinguish the message format that is expected by the
firmware, add a version field to the message header. This allows to
encode and decode the messages for the version of the firmware that was
loaded by the driver.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The length of the message will be determined when the message is
encoded. Writing the size of the struct into the message in the driver
won't be the actual length of the message that is send to the firmware.
Therefore, drop the length field from the message.
Since the header is the same for all response messages, it does not make
sense to read the header in each decoding function, but we can simply
decode it once before dispatching to the respective functions.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The firmware decides how many reference frames shall be used und returns
this information via the config blob. In order to set the number of
reference frames in the PPS, the driver has to read these values from
the config blob after the channel has been created in the firmware.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Firmware versions >= 2019.2 do not configure the channel via the mailbox
interface anymore, but use a separate chunk of memory that is only
referenced by the message. As the configuration must be in a format that
is understood by the firmware and this format can change between
firmware versions, handle it similar to the message and treat is as a
blob.
In order to support both methods in the driver, always use a separate
blob for the channel configuration and copy that blob into the mailbox
if the firmware requires it and otherwise reference it.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Even bits in bitfields do not keep their position, but move around or
move to other bitfields. Therefore, the driver has to handle bitfields
differently depending on the firmware version.
Create separate fields for the options that have been in bitfields and
handle the bitfields when encoding the message.
As a side effect, this makes the messages a bit more readable.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Like the message format, also the identifiers in the messages differ
between firmware versions. This especially affects the identifier for
the codec that shall be used. As the messages used by the driver are now
independent from the firmware, we can use the values defined by V4L2 as
identifiers in the messages.
Convert the V4L2 codec format to the respective firmware value when
encoding the messages to binary format instead beforehand.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The messages are now explicitly converted from the struct to the binary
representation used by the firmware. Therefore, there is no need to keep
the structs packed anymore.
Drop the attribute and avoid confusion why the mails are packed.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When pushing the buffers for the intermediate and reference frames to
the MCU, the driver relied on the message size to calculate the number
of buffers. As it is not necessary anymore to keep the messages binary
compatible to the firmware, we can just explicitly write the number of
buffers into the message.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The message format in the mailboxes differ between firmware versions.
Therefore, it is necessary to decouple the mailbox format of the driver
from the message format of the firmware. This allows to keep a
consistent message format in the driver while still supporting various
firmware versions.
Add an intermediate step to encode and decode message before writing the
mails to the mailboxes.
On the other hand, this allows to handle optional fields in the
messages, which is required for advanced features of the encoder and was
not possible until now.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Rework the functions that read and write the SRAM that is used to
communicate with the MCU.
As the functions will not operate on structs but on prepared binary
buffers, make the buffer stride more explicit. Also, avoid any uses of
struct mcu_msg_header to analyze messages in memory, because the header
will be made independent of the binary representation in the mailbox.
Instead explicitly access the mail size field in the mailbox.
As at it, further reduce the dependency between the mailboxes and struct
allegro_dev.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a send/notify abstraction for the mailbox and separate the message
handling in the driver from the code to read and write message to the
mailbox.
This untangles how mails are written into the MCU's SRAM and signaled to
the MCU from the protocol between the driver and the firmware.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Delete the doubled words "the" in comments.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Delete the doubled word "flag" in a comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Change the doubled word "the" in a comment to "to the".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Delete the doubled word "the" in a comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Delete the doubled word "the" in a comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
I don't know what minimal image dimensions are, but 32x32 appears to
be ok according to the docs.
This is needed for small sensors like 80x80 thermal imagers.
Signed-off-by: Krzysztof Halasa <khalasa@piap.pl>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a control in VIMC to display information such as the correct order of
colors for a given test pattern, counter, brightness, hue, saturation,
contrast, width and height at sensor over test image.
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently there is no method to know the correct order of the colors for
a test image generated by tpg. Write a function that returns a string of
colors' order given a tpg. It returns a NULL pointer in case of test
patterns which do not have a well defined colors' order. Hence add a
NULL check for text in tpg_gen_text().
[hverkuil: white -> White (for consistency)]
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Change the argument of type char * to const char * for function
tpg_gen_text().
This function should take in a const char * as opposed to char * as it
does not make changes to the text. This issue was found while passing
the order of colors of tpg generated test image (which is a const char
*) to this function.
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Reviewed-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If platform_driver_register() fails within vpss_init() resources are not
cleaned up. The patch fixes this issue by introducing the corresponding
error handling.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The hardware only supports 4:2:0 or 4:0:0 (monochrome),
8-bit depth content.
Verify that the SPS refers to a supported bitstream, and refuse
unsupported bitstreams by failing at TRY_EXT_CTRLS time.
Given the JPEG compression level control is the only one
that needs setting, a specific ops is provided.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The hardware only supports 4:2:2, 4:2:0 or 4:0:0 (monochrome),
8-bit or 10-bit depth content.
Verify that the SPS refers to a supported bitstream, and refuse
unsupported bitstreams by failing at TRY_EXT_CTRLS time.
The driver is currently broken on 10-bit and 4:2:2
so disallow those as well.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Commit 986eee3a52 ("media: hantro: Prevent encoders from using
post-processing") fixed hantro_needs_postproc condition,
but missed one case. Encoders don't have any post-processor
hardware block, so also can't be disabled.
Fix it.
Fixes: 986eee3a52 ("media: hantro: Prevent encoders from using post-processing")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The driver doesn't need the bytesused argument.
For decoders, the plane bytesused is known and therefore,
buf_prepare is used to set it. For encoders, it's
handled by the codec_ops.done hook.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
hantro_enc_buf_finish is used only for JPEG, and so should
be moved to JPEG codec_ops.done.
This cleanup is also taking care of addressing
a subtle issue: checking the non-NULL bounce buffer
using ctx->jpeg_enc, which is a member of a union is
confusing and error-prone.
Note that the issue is currently innocuous because an
encoder context only supports JPEG.
The codec_ops.done has an argument that codec-specific code
shouldn't need, so drop that as well.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
