leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
751,981 Commits 2 Branches 0 Tags 5.1 GiB
b7c7b05065
Commit Graph

878 Commits

Author SHA1 Message Date
Icenowy Zheng
b7c7b05065 clk: sunxi-ng: add support for H6 PRCM CCU 
The H6 has clock/reset controls in PRCM part, like old SoCs such as H3
and A64. However, the PRCM CCU is rearranged; the register arragement
is now similar to the main CCU of H6, and the PRCM now has two APB
buses to control -- one is clocked from AHB clock derivde from AR100
clock, the other is clocked from the same mux with AR100 clock.
Therefore a new driver is written for it.

As there's no official document about the PRCM in H6, all the information
are indirectly collected from BSP and parts of the document, and the
information source is noted as comments in the driver's source code. If
reliable information is provided furtherly, the driver needs to be
rechecked.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
 2018-05-04 17:05:46 +02:00
Linus Torvalds
ca4e7c5120 The large diff this time around is from the addition of a new clk driver 
for the TI Davinci family of SoCs. So far those clks have been supported
 with a custom implementation of the clk API in the arch port instead of in
 the CCF. With this driver merged we're one step closer to having a single
 clk API implementation.
 
 The other large diff is from the Amlogic clk driver that underwent some
 major surgery to use regmap. Beyond that, the biggest hitter is Samsung
 which needed some reworks to properly handle clk provider power domains
 and a bunch of PLL rate updates.
 
 The core framework was fairly quiet this round, just getting some cleanups
 and small fixes for some of the more esoteric features. And the usual
 set of driver non-critical fixes, cleanups, and minor additions are here as
 well.
 
 Core:
  - Rejig clk_ops::init() to be a little earlier for phase/accuracy ops
  - debugfs ops macroized to shave some lines of boilerplate code
  - Always calculate the phase instead of caching it in clk_get_phase()
  - More __must_check on bulk clk APIs
 
 New Drivers:
  - TI's Davinci family of SoCs
  - Intel's Stratix10 SoC
  - stm32mp157 SoC
  - Allwinner H6 CCU
  - Silicon Labs SI544 clock generator chip
  - Renesas R-Car M3-N and V3H SoCs
  - i.MX6SLL SoCs
 
 Removed Drivers:
  - ST-Ericsson AB8540/9540
 
 Updates:
  - Mediatek MT2701 and MT7622 audsys support and MT2712 updates
  - STM32F469 DSI and STM32F769 sdmmc2 support
  - GPIO clks can sleep now
  - Spreadtrum SC9860 RTC clks
  - Nvidia Tegra MBIST workarounds and various minor fixes
  - Rockchip phase handling fixes and a memory leak plugged
  - Renesas drivers switch to readl/writel from clk_readl/clk_writel
  - Renesas gained CPU (Z/Z2) and watchdog support
  - Rockchip rk3328 display clks and rk3399 1.6GHz PLL support
  - Qualcomm PM8921 PMIC XO buffers
  - Amlogic migrates to regmap APIs
  - TI Keystone clk latching support
  - Allwinner H3 and H5 video clk fixes
  - Broadcom BCM2835 PLLs needed another bit to enable
  - i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix
  - i.MX6UL/ULL epdc_podf support
  - Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlrPhMARHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSVkkxAArsItSoxQV18kQlJ9S7o2z75giquXQfvy
 Y/cKIIY1kz4K+qm+rpbl6PjukrSPtfM+wGmepGt+CptOdlj672viFxI7zjrd1iSy
 /xJo7d5/nZxvmx0qcwYWVTCOsU+4FUUkpq5mE91KEvwny/qgRqEgWeLoWTDLBktF
 MzGtBUYudjkRYLd2I31DGB3dqI0Dy9JwuEpJfCAt5h4dztml3aNjYknjQ/vUSEXL
 61mSYM1fwzK8rnrjSlQqb+X0OoJ6d5Pz2uHRXnWfGlS8UOh5N9NFGKpiErLm+h/+
 /FigA6f9HBeUneNf5Dnu568FHwE2FyUbZKVd40OYj3x128OnAoKUoRt68/8FQPdf
 NoQb3zH3Ha1JbwWgvQ9RkWp82kYnMctrlkh6IFye/FxdfwCWA4SE/iIgJXRJbQ/K
 blZz14jkXT8oISqy6nryGv3CK/RFXzVdvVa4z41xHc4cnLpNBsv1o89a+9MyTvMD
 wYOnc/98/l5xYs5PvQqNrd/onE0GLIeOEtkWNXH0OACe6FOIuz5eVn4Uh8aIm0wl
 +EHwHRwB7AQK+a7jwEfQ88aceAntvFlymUUcsncyCXn2s0knc5BHJPSHhoZk1tJb
 Wv2Fcln3Mwjhhq9aoNxfAJf4pIqmFgdQEtwyND4GJlP55Xay5QMZVEdwnNfFDvmf
 X6P2pfkBqkg=
 =ys4O
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "The large diff this time around is from the addition of a new clk
  driver for the TI Davinci family of SoCs. So far those clks have been
  supported with a custom implementation of the clk API in the arch port
  instead of in the CCF. With this driver merged we're one step closer
  to having a single clk API implementation.

  The other large diff is from the Amlogic clk driver that underwent
  some major surgery to use regmap. Beyond that, the biggest hitter is
  Samsung which needed some reworks to properly handle clk provider
  power domains and a bunch of PLL rate updates.

  The core framework was fairly quiet this round, just getting some
  cleanups and small fixes for some of the more esoteric features. And
  the usual set of driver non-critical fixes, cleanups, and minor
  additions are here as well.

  Core:
   - Rejig clk_ops::init() to be a little earlier for phase/accuracy ops
   - debugfs ops macroized to shave some lines of boilerplate code
   - Always calculate the phase instead of caching it in clk_get_phase()
   - More __must_check on bulk clk APIs

  New Drivers:
   - TI's Davinci family of SoCs
   - Intel's Stratix10 SoC
   - stm32mp157 SoC
   - Allwinner H6 CCU
   - Silicon Labs SI544 clock generator chip
   - Renesas R-Car M3-N and V3H SoCs
   - i.MX6SLL SoCs

  Removed Drivers:
   - ST-Ericsson AB8540/9540

  Updates:
   - Mediatek MT2701 and MT7622 audsys support and MT2712 updates
   - STM32F469 DSI and STM32F769 sdmmc2 support
   - GPIO clks can sleep now
   - Spreadtrum SC9860 RTC clks
   - Nvidia Tegra MBIST workarounds and various minor fixes
   - Rockchip phase handling fixes and a memory leak plugged
   - Renesas drivers switch to readl/writel from clk_readl/clk_writel
   - Renesas gained CPU (Z/Z2) and watchdog support
   - Rockchip rk3328 display clks and rk3399 1.6GHz PLL support
   - Qualcomm PM8921 PMIC XO buffers
   - Amlogic migrates to regmap APIs
   - TI Keystone clk latching support
   - Allwinner H3 and H5 video clk fixes
   - Broadcom BCM2835 PLLs needed another bit to enable
   - i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix
   - i.MX6UL/ULL epdc_podf support
   - Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (233 commits)
  clk: davinci: add a reset lookup table for psc0
  clk: imx: add clock driver for imx6sll
  dt-bindings: imx: update clock doc for imx6sll
  clk: imx: add new gate/gate2 wrapper funtion
  clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux
  clk: cs2000: set pm_ops in hibernate-compatible way
  clk: bcm2835: De-assert/assert PLL reset signal when appropriate
  clk: imx7d: Move clks_init_on before any clock operations
  clk: imx7d: Correct ahb clk parent select
  clk: imx7d: Correct dram pll type
  clk: imx7d: Add USB clock information
  clk: socfpga: stratix10: add clock driver for Stratix10 platform
  dt-bindings: documentation: add clock bindings information for Stratix10
  clk: ti: fix flag space conflict with clkctrl clocks
  clk: uniphier: add additional ethernet clock lines for Pro4
  clk: uniphier: add SATA clock control support
  clk: uniphier: add PCIe clock control support
  clk: Add driver for the si544 clock generator chip
  clk: davinci: Remove redundant dev_err calls
  clk: uniphier: add ethernet clock control support for PXs3
  ...
 2018-04-13 15:51:06 -07:00
Stephen Boyd
a339bdf64a Merge branches 'clk-stratix10', 'clk-imx', 'clk-bcm', 'clk-cs2000' and 'clk-imx6sll' into clk-next 
* clk-stratix10:
  clk: socfpga: stratix10: add clock driver for Stratix10 platform
  dt-bindings: documentation: add clock bindings information for Stratix10

* clk-imx:
  clk: imx7d: Move clks_init_on before any clock operations
  clk: imx7d: Correct ahb clk parent select
  clk: imx7d: Correct dram pll type
  clk: imx7d: Add USB clock information
  clk: imx: pllv2: avoid using uninitialized values
  clk: imx6ull: Add epdc_podf instead of sim_podf
  clk: imx: imx7d: correct video pll clock tree
  clk: imx: imx7d: add the Keypad Port module clock
  clk: imx7d: add CAAM clock
  clk: imx: imx7d: add the snvs clock
  clk: imx: imx6sx: update cko mux options

* clk-bcm:
  clk: bcm2835: De-assert/assert PLL reset signal when appropriate

* clk-cs2000:
  clk: cs2000: set pm_ops in hibernate-compatible way

* clk-imx6sll:
  clk: imx: add clock driver for imx6sll
  dt-bindings: imx: update clock doc for imx6sll
  clk: imx: add new gate/gate2 wrapper funtion
  clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux
 2018-04-06 13:22:12 -07:00
Stephen Boyd
a83fdfae5a Merge branches 'clk-davinci', 'clk-si544', 'clk-rockchip', 'clk-uniphier' and 'clk-ti-flag-fix' into clk-next 
* clk-davinci:
  clk: davinci: Remove redundant dev_err calls
  clk: davinci: cfgchip: Add TI DA8XX USB PHY clocks
  clk: davinci: New driver for TI DA8XX CFGCHIP clocks
  dt-bindings: clock: Add bindings for DA8XX CFGCHIP clocks
  clk: davinci: Add platform information for TI DM646x PSC
  clk: davinci: Add platform information for TI DM644x PSC
  clk: davinci: Add platform information for TI DM365 PSC
  clk: davinci: Add platform information for TI DM355 PSC
  clk: davinci: Add platform information for TI DA850 PSC
  clk: davinci: Add platform information for TI DA830 PSC
  clk: davinci: New driver for davinci PSC clocks
  dt-bindings: clock: New bindings for TI Davinci PSC
  clk: davinci: Add platform information for TI DM646x PLL
  clk: davinci: Add platform information for TI DM644x PLL
  clk: davinci: Add platform information for TI DM365 PLL
  clk: davinci: Add platform information for TI DM355 PLL
  clk: davinci: Add platform information for TI DA850 PLL
  clk: davinci: Add platform information for TI DA830 PLL
  clk: davinci: New driver for davinci PLL clocks
  dt-bindings: clock: Add new bindings for TI Davinci PLL clocks

* clk-si544:
  clk: Add driver for the si544 clock generator chip

* clk-rockchip:
  clk: rockchip: assign correct id for pclk_ddr and hclk_sd in rk3399
  clk: rockchip: Fix error return in phase clock registration
  clk: rockchip: Correct the behaviour of restoring cached phase
  clk: rockchip: Fix wrong parents for MMC phase clock for rk3328
  clk: rockchip: Fix wrong parent for SDMMC phase clock for rk3228
  clk: rockchip: Add 1.6GHz PLL rate for rk3399
  clk: rockchip: Restore the clock phase after the rate was changed
  clk: rockchip: Prevent calculating mmc phase if clock rate is zero
  clk: rockchip: Free the memory on the error path
  clk: rockchip: document hdmi_phy external input for rk3328
  clk: rockchip: add flags for rk3328 dclk_lcdc
  clk: rockchip: remove ignore_unused flag from rk3328 vio_h2p clocks
  clk: rockchip: protect all remaining rk3328 interconnect clocks
  clk: rockchip: export sclk_hdmi_sfc on rk3328
  clk: rockchip: remove HCLK_VIO from rk3328 dt header
  clk: rockchip: fix hclk_vio_niu on rk3328

* clk-uniphier:
  clk: uniphier: add additional ethernet clock lines for Pro4
  clk: uniphier: add SATA clock control support
  clk: uniphier: add PCIe clock control support
  clk: uniphier: add ethernet clock control support for PXs3
  clk: uniphier: add Pro4/Pro5/PXs2 audio system clock

* clk-ti-flag-fix:
  clk: ti: fix flag space conflict with clkctrl clocks
  clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
 2018-04-06 13:22:06 -07:00
Stephen Boyd
b03781920c Merge branches 'clk-mediatek', 'clk-hisi', 'clk-allwinner', 'clk-ux500' and 'clk-renesas' into clk-next 
* clk-mediatek:
  clk: mediatek: add audsys support for MT2701
  clk: mediatek: add devm_of_platform_populate() for MT7622 audsys
  dt-bindings: clock: mediatek: add audsys support for MT2701
  dt-bindings: clock: mediatek: update audsys documentation to adapt MFD device
  clk: mediatek: update missing clock data for MT7622 audsys
  clk: mediatek: fix PWM clock source by adding a fixed-factor clock
  dt-bindings: clock: mediatek: add binding for fixed-factor clock axisel_d4

* clk-hisi:
  clk: hisilicon: fix potential NULL dereference in hisi_clk_alloc()
  clk: hisilicon: mark wdt_mux_p[] as const
  clk: hisilicon: Mark phase_ops static
  clk: hi3798cv200: add emmc sample and drive clock
  clk: hisilicon: add hisi phase clock support
  clk: hi3798cv200: add COMBPHY0 clock support
  clk: hi3798cv200: fix define indentation
  clk: hi3798cv200: add support for HISTB_USB2_OTG_UTMI_CLK
  clk: hi3798cv200: correct IR clock parent
  clk: hi3798cv200: fix unregister call sequence in error path

* clk-allwinner:
  clk: sunxi-ng: add missing hdmi-slow clock for H6 CCU
  clk: sunxi-ng: add support for the Allwinner H6 CCU
  dt-bindings: add device tree binding for Allwinner H6 main CCU
  clk: sunxi-ng: Support fixed post-dividers on NKMP style clocks
  clk: sunxi-ng: h3: h5: export CLK_PLL_VIDEO
  clk: sunxi-ng: h3: h5: Allow some clocks to set parent rate
  clk: sunxi-ng: h3: h5: Add minimal rate for video PLL
  clk: sunxi-ng: Add check for minimal rate to NM PLLs
  clk: sunxi-ng: Use u64 for calculation of nkmp rate
  clk: sunxi-ng: Mask nkmp factors when setting register
  clk: sunxi-ng: remove select on obsolete SUNXI_CCU_X kconfig name

* clk-ux500:
  clk: ux500: Drop AB8540/9540 support

* clk-renesas: (27 commits)
  clk: renesas: cpg-mssr: Adjust r8a77980 ifdef
  clk: renesas: rcar-gen3: Always use readl()/writel()
  clk: renesas: sh73a0: Always use readl()/writel()
  clk: renesas: rza1: Always use readl()/writel()
  clk: renesas: rcar-gen2: Always use readl()/writel()
  clk: renesas: r8a7740: Always use readl()/writel()
  clk: renesas: r8a73a4: Always use readl()/writel()
  clk: renesas: mstp: Always use readl()/writel()
  clk: renesas: div6: Always use readl()/writel()
  clk: fix false-positive Wmaybe-uninitialized warning
  clk: renesas: r8a77965: Replace DU2 clock
  clk: renesas: cpg-mssr: Add support for R-Car M3-N
  clk: renesas: cpg-mssr: add R8A77980 support
  dt-bindings: clock: add R8A77980 CPG core clock definitions
  clk: renesas: r8a7792: Add rwdt clock
  clk: renesas: r8a7794: Add rwdt clock
  clk: renesas: r8a7791/r8a7793: Add rwdt clock
  clk: renesas: r8a7790: Add rwdt clock
  clk: renesas: r8a7745: Add rwdt clock
  clk: renesas: r8a7743: Add rwdt clock
  ...
 2018-04-06 13:21:57 -07:00
Stephen Boyd
fbc20b8c3c Merge branches 'clk-mvebu', 'clk-phase', 'clk-nxp', 'clk-mtk2712' and 'clk-qcom-rpmcc' into clk-next 
* clk-mvebu:
  clk: mvebu: armada-38x: add support for missing clocks
  clk: mvebu: cp110: Fix clock tree representation

* clk-phase:
  clk: Don't show the incorrect clock phase
  clk: update cached phase to respect the fact when setting phase

* clk-nxp:
  clk: lpc32xx: Set name of regmap_config

* clk-mtk2712:
  clk: mediatek: update clock driver of MT2712
  dt-bindings: clock: add clocks for MT2712

* clk-qcom-rpmcc:
  clk: qcom: rpmcc: Add support to XO buffered clocks
 2018-04-06 13:21:52 -07:00
Stephen Boyd
e8121d9867 Merge branches 'clk-spreadtrum', 'clk-stm32f', 'clk-stm32mp1', 'clk-hi655x' and 'clk-gpio' into clk-next 
* clk-spreadtrum:
  clk: sprd: add RTC gate for SC9860
  dt-bindings: clocks: add APB RTC gate for SC9860

* clk-stm32f:
  clk: stm32: Add clk entry for SDMMC2 on stm32F769
  clk: stm32: Add DSI clock for STM32F469 Board
  clk: stm32: END_PRIMARY_CLK should be declare after CLK_SYSCLK

* clk-stm32mp1:
  clk: stm32: add configuration flags for each of the stm32 drivers
  clk: stm32mp1: add Debug clocks
  clk: stm32mp1: add MCO clocks
  clk: stm32mp1: add RTC clock
  clk: stm32mp1: add Peripheral & Kernel Clocks
  clk: stm32mp1: add Kernel timers
  clk: stm32mp1: add Sub System clocks
  clk: stm32mp1: add Post-dividers for PLL
  clk: stm32mp1: add PLL clocks
  clk: stm32mp1: add Source Clocks for PLLs
  clk: stm32mp1: add MP1 gate for hse/hsi/csi oscillators
  clk: stm32mp1: Introduce STM32MP1 clock driver
  dt-bindings: Document STM32MP1 Reset Clock Controller (RCC) bindings

* clk-hi655x:
  clk: enable hi655x common clk automatically

* clk-gpio:
  clk: clk-gpio: Allow GPIO to sleep in set/get_parent
 2018-04-06 13:21:45 -07:00
Stephen Boyd
15afa044cb Merge branches 'clk-ti', 'clk-amlogic', 'clk-tegra' and 'clk-samsung' into clk-next 
* clk-ti:
  clk: keystone: sci-clk: add support for dynamically probing clocks
  clk: ti: add support for clock latching to mux clocks
  clk: ti: add support for clock latching to divider clocks
  clk: ti: add generic support for clock latching
  clk: ti: add support for register read-modify-write low-level operation
  dt-bindings: clock: ti: add latching support to mux and divider clocks

* clk-amlogic: (50 commits)
  clk: meson: Drop unused local variable and add static
  clk: meson: clean-up clk81 clocks
  clk: meson: add fdiv clock gates
  clk: meson: add mpll pre-divider
  clk: meson: axg: add hifi pll clock
  clk: meson: axg: add hifi clock bindings
  clk: meson: add ROUND_CLOSEST to the pll driver
  clk: meson: add gp0 frac parameter for axg and gxl
  clk: meson: improve pll driver results with frac
  clk: meson: remove special gp0 lock loop
  clk: meson: poke pll CNTL last
  clk: meson: add fractional part of meson8b fixed_pll
  clk: meson: use hhi syscon if available
  clk: meson: remove obsolete cpu_clk
  clk: meson: rework meson8b cpu clock
  clk: meson: split divider and gate part of mpll
  clk: meson: migrate plls clocks to clk_regmap
  clk: meson: migrate the audio divider clock to clk_regmap
  clk: meson: migrate mplls clocks to clk_regmap
  clk: meson: add regmap helpers for parm
  ...

* clk-tegra:
  clk: tegra: Fix pll_u rate configuration
  clk: tegra: Specify VDE clock rate
  clk: tegra20: Correct PLL_C_OUT1 setup
  clk: tegra: Mark HCLK, SCLK and EMC as critical
  clk: tegra: MBIST work around for Tegra210
  clk: tegra: add fence_delay for clock registers
  clk: tegra: Add la clock for Tegra210

* clk-samsung: (22 commits)
  clk: samsung: Mark a few things static
  clk: samsung: Add fout=196608001 Hz EPLL rate entry for exynos4412
  clk: samsung: exynos5250: Add missing clocks for FIMC LITE SYSMMU devices
  clk: samsung: exynos5420: Add more entries to EPLL rate table
  clk: samsung: exynos5420: Add CLK_SET_RATE_PARENT flag to mout_mau_epll_clk
  clk: samsung: exynos5250: Move PD-dependent clocks to Exynos5 sub-CMU
  clk: samsung: exynos5420: Move PD-dependent clocks to Exynos5 sub-CMU
  clk: samsung: Add Exynos5 sub-CMU clock driver
  soc: samsung: pm_domains: Add blacklisting clock handling
  clk: samsung: Add compile time PLL rate validators
  clk: samsung: s3c2410: Fix PLL rates
  clk: samsung: exynos7: Fix PLL rates
  clk: samsung: exynos5433: Fix PLL rates
  clk: samsung: exynos5260: Fix PLL rates
  clk: samsung: exynos5250: Fix PLL rates
  clk: samsung: exynos3250: Fix PLL rates
  clk: exynos5433: Extend list of available AUD_PLL output frequencies
  clk: exynos5433: Add CLK_IGNORE_UNUSED flag to sclk_ioclk_i2s1_bclk
  clk: samsung: Add a git tree entry to MAINTAINERS
  clk: samsung: Remove redundant dev_err call in exynos_audss_clk_probe()
  ...
 2018-04-06 13:21:33 -07:00
Bai Ping
0c123a4fbb dt-bindings: imx: update clock doc for imx6sll 
Add clock binding doc update for imx6sll.

Signed-off-by: Bai Ping <ping.bai@nxp.com>
Acked-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2018-04-06 11:27:26 -07:00
Dinh Nguyen
89727949ea dt-bindings: documentation: add clock bindings information for Stratix10 
Document that Stratix10 clock bindings, and add the clock header file. The
clock header is an enumeration of all the different clocks on the Stratix10
platform.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2018-04-06 09:54:59 -07:00
Arnd Bergmann
d45357e40e arm64: tegra: Device tree changes for v4.17-rc1 
Adds initial support for the P2972-0000 development board based on
 Tegra194 and enables the AHCI controller on Jetson TX1.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAlqr0SYTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoUryD/0fakVwRpCnyRwlfe6hF2MJmpUPu8Ft
 K3VMcL+JW3fDpxS6NYfw7xaI0YiqXlmL/V/hDwmcI5LQVN/TmRxBg3811xxVYQy3
 d6nnDvZPru8wLMooereHZjSdY/1yRx/DjzS2RHd622ZwV7FR/7KzsBOEELooNlKG
 c6HK/evO8Wr1QC1nsQnrCOtQm6cuw5nVTOSxh3tzHjsx/YEqZrqalTjD0temyvA4
 vk/HrBwXQWS/3a7n6avCGxh3MW4K8zYgYw6E7w4GW3umeKu3kVht8LodqYl5B3Az
 8cXmd5cWDgyR8A5O0OOX/7EAUBg/D2RxbUUCwThgh/NCbrm+LCeE7xNM39eBuIJW
 GLwsdsAih3svPIMYDF7IgEMlJ1+X8IE+AtDmBLbta0fsNljAsK30v/96/+llL579
 S4sg3iphpe4Lzd7y0mLM8m5wRNCjaG/DbDYj+Xx0towtIm+UU6hf/G+MEUMTpC4W
 +ucGYzACguFOQNEPRvLptJxqqcEGz3Do3GaSpzdieWpibTm91Gfw/IfqdY8KYKy5
 DYKMCVo7iYSs0SbvRg7T0nMYF2OnIHDWVFYP26bK3OaQtWaU7mdaA99Q5V7GNQvH
 pklUJvjV5igWQ2J56QHD0C642C133kPvcKWu2638GeVtUsL/PF+HHhZaKhODODN7
 F/jibSvkt2wTxg==
 =u8uZ
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.17-arm64-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

Pull "arm64: tegra: Device tree changes for v4.17-rc1" from Thierry Reding:

Adds initial support for the P2972-0000 development board based on
Tegra194 and enables the AHCI controller on Jetson TX1.

* tag 'tegra-for-4.17-arm64-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: Enable AHCI on Jetson TX1
  arm64: tegra: Add SATA node for Tegra210
  arm64: tegra: Add device tree for the Tegra194 P2972-0000 board
  arm64: tegra: Add Tegra194 chip device tree
 2018-03-27 13:27:04 +02:00
Icenowy Zheng
f422fa558a
clk: sunxi-ng: add missing hdmi-slow clock for H6 CCU 
The Allwinner H6 CCU has a "HDMI Slow Clock", which is currently missing
in the ccu-sun50i-h6 driver.

Add this missing clock to the driver.

Fixes: 542353ea ("clk: sunxi-ng: add support for the Allwinner H6 CCU")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
 2018-03-21 12:27:13 +01:00
Srinivas Kandagatla
8bcde6582c clk: qcom: rpmcc: Add support to XO buffered clocks 
XO is onchip buffer clock to generate 19.2MHz.

This patch adds support to 5 XO buffer clocks found on PMIC8921,
these buffer clocks can be controlled from external pin or in
manual mode.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2018-03-19 14:40:26 -07:00
Weiyi Lu
8465baaeca dt-bindings: clock: add clocks for MT2712 
add new clocks according to ECO design change

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2018-03-19 14:37:31 -07:00
Gabriel Fernandez
2f05b6b920 clk: stm32: Add DSI clock for STM32F469 Board 
This patch adds DSI clock for STM32F469 board

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2018-03-19 13:45:11 -07:00
Gabriel Fernandez
fa6f398505 clk: stm32: END_PRIMARY_CLK should be declare after CLK_SYSCLK 
Update of END_PRIMARY_CLK was missed, it should be after CLK_SYSCLK
hsi and sysclk are overwritten by gpioa and gpiob.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2018-03-19 13:44:53 -07:00
Ryder Lee
936ceb12c5 clk: mediatek: update missing clock data for MT7622 audsys 
Add missing clock data 'CLK_AUDIO_AFE_CONN' for MT7622 audsys.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2018-03-19 13:40:57 -07:00
Sean Wang
55a5fcafe3 dt-bindings: clock: mediatek: add binding for fixed-factor clock axisel_d4 
Just add binding for a fixed-factor clock axisel_d4, which would be
referenced by PWM devices on MT7623 or MT2701 SoC.

Cc: stable@vger.kernel.org
Fixes: 1de9b21633 ("clk: mediatek: Add dt-bindings for MT2701 clocks")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2018-03-19 13:25:09 -07:00
Icenowy Zheng
524353ea48
clk: sunxi-ng: add support for the Allwinner H6 CCU 
The Allwinner H6 SoC has a CCU which has been largely rearranged.

Add support for it in the sunxi-ng CCU framework.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
 2018-03-18 21:17:07 +01:00
Chunyan Zhang
f7c14dd5b1 dt-bindings: clocks: add APB RTC gate for SC9860 
Added index of RTC gate clocks which are used by some devices on aon
area of SC9860, for example the Watchdog timer.

Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
 2018-03-16 15:53:31 -07:00
Jerome Brunet
a4fb7df25d clk: meson: axg: add hifi clock bindings 
Add the new HIFI pll to axg clock bindings

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
 2018-03-13 10:09:52 +01:00
Gabriel Fernandez
9bee94e7b7 clk: stm32mp1: Introduce STM32MP1 clock driver 
This patch introduces the mechanism to probe stm32mp1 driver.
It also defines registers definition.
This patch also introduces the generic mechanism to register
a clock (a simple gate, divider and fixed factor).

All clocks will be defined in one table.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
 2018-03-11 15:40:32 -07:00
Peter De Schrijver
89e423c3f1 clk: tegra: Add la clock for Tegra210 
This clock is needed by the memory built-in self test work around.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Hector Martin <marcan@marcan.st>
Tested-by: Andre Heider <a.heider@gmail.com>
Tested-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2018-03-08 15:26:11 +01:00
Mikko Perttunen
5425fb15d8 arm64: tegra: Add Tegra194 chip device tree 
Add the chip-level device tree, including binding headers, for the
NVIDIA Tegra194 "Xavier" system-on-chip. Only a small subset of devices
are initially available, enough to boot to UART console.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
 2018-03-08 14:31:13 +01:00
Jernej Skrabec
55de0f31df
clk: sunxi-ng: h3: h5: export CLK_PLL_VIDEO 
CLK_PLL_VIDEO needs to be referenced in HDMI DT entry as a possible
PHY clock parent.

Export it so it can be used later in DT.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
 2018-03-02 08:42:30 +01:00
Stefan Agner
1691cc375a clk: imx: imx7d: add the Keypad Port module clock 
According to the i.MX7D Reference Manual, the Keypad Port module
(KPP) requires this clock gate to be enabled.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
 2018-02-28 14:43:00 +08:00
Rui Miguel Silva
baf15cbf54 clk: imx7d: add CAAM clock 
Add CAAM clock so that we could use the Cryptographic Acceleration and
Assurance Module (CAAM) hardware block.

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-clk@vger.kernel.org
Cc: "Horia Geantă" <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
 2018-02-28 09:17:41 +08:00
Jianguo Sun
80f8ce5895 clk: hi3798cv200: add COMBPHY0 clock support 
The clock COMBPHY1 has already been supported by hi3798cv200 driver,
but COMBPHY0 is missing.  It adds COMBPHY0 clock support.

Since the mux table is being shared by COMBPHY0 and COMBPHY1, it renames
comphy1_mux_p and comphy1_mux_table a bit to drop instance number '1'
from there.

Signed-off-by: Jianguo Sun <sunjianguo1@huawei.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
 2018-02-27 09:19:12 +08:00
Shawn Guo
a44d1f531a clk: hi3798cv200: fix define indentation 
It's a coding-style fix, which corrects the indentation for all those
clock definitions, so that the code looks nicer and new definitions can
be added with a recommended indentation.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
 2018-02-27 09:19:12 +08:00
Jacopo Mondi
7ce36da900 clk: renesas: cpg-mssr: Add support for R-Car M3-N 
Initial support for R-Car M3-N (r8a77965), including core and module
clocks.

Based on Table 8.2d of "R-Car Series, 3rd Generation User's Manual:
Hardware (Rev. 0.80, Oct 31, 2017)".

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
 2018-02-26 09:13:29 +01:00
Anson Huang
d931ba53e0 clk: imx: imx7d: add the snvs clock 
According to the i.MX7D Reference Manual,
SNVS block has a clock gate, accessing SNVS block
would need this clock gate to be enabled, add it
into clock tree so that SNVS module driver can
operate this clock gate.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
 2018-02-22 17:46:58 +08:00
Sergei Shtylyov
35b3c462da dt-bindings: clock: add R8A77980 CPG core clock definitions 
Add macros usable by the device tree sources to reference the R8A77980
CPG core clocks by index. The data come from the table 8.2e of the R-Car
Series, 3rd Generation User's Manual: Hardware (Rev. 0.80, Oct, 2017),
however I had to add the Z2 clock which is somehow present only on the
figure 8.1e...

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
 2018-02-20 13:38:32 +01:00
Heiko Stuebner
224a638441 clk: rockchip: remove HCLK_VIO from rk3328 dt header 
This clock is not hclk_vio but hclk_vio_niu, the clock for the interconnect
output. The clock got fixed and the id was never used in this incorrect form,
so remove it.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2018-02-12 15:00:44 +01:00
Linus Torvalds
8578953687 MIPS changes for 4.16 
These are the main MIPS changes for 4.16. Rough overview:
  - Basic support for the Ingenic JZ4770 based GCW Zero open-source
    handheld video game console
  - Support for the Ranchu board (used by Android emulator)
  - Various cleanups and misc improvements
 
 Fixes:
  - Fix generic platform's USB_*HCI_BIG_ENDIAN selects (4.9)
  - Fix vmlinuz default build when ZBOOT selected
  - Fix clean up of vmlinuz targets
  - Fix command line duplication (in preparation for Ingenic JZ4770)
 
 Miscellaneous:
  - Allow Processor ID reads to be to be optimised away by the compiler
    (improves performance when running in guest)
  - Push ARCH_MIGHT_HAVE_PC_SERIO/PARPORT down to platform level to
    disable on generic platform with Ranchu board support
  - Add helpers for assembler macro instructions for older assemblers
  - Use assembler macro instructions to support VZ, XPA & MSA operations
    on older assemblers, removing C wrapper duplication
  - Various improvements to VZ & XPA assembly wrappers
  - Add drivers/platform/mips/ to MIPS MAINTAINERS entry
 
 Minor cleanups:
  - Misc FPU emulation cleanups (removal of unnecessary include, moving
    macros to common header, checkpatch and sparse fixes)
  - Remove duplicate assignment of core in play_dead()
  - Remove duplication in watchpoint handling
  - Remove mips_dma_mapping_error() stub
  - Use NULL instead of 0 in prepare_ftrace_return()
  - Use proper kernel-doc Return keyword for
    __compute_return_epc_for_insn()
  - Remove duplicate semicolon in csum_fold()
 
 Platform support:
 
 Broadcom:
  - Enable ZBOOT on BCM47xx
 
 Generic platform:
  - Add Ranchu board support, used by Android emulator
  - Fix machine compatible string matching for Ranchu
  - Support GIC in EIC mode
 
 Ingenic platforms:
  - Add DT, defconfig and other support for JZ4770 SoC and GCW Zero
  - Support dynamnic machine types (i.e. JZ4740 / JZ4770 / JZ4780)
  - Add Ingenic JZ4770 CGU clocks
  - General Ingenic clk changes to prepare for JZ4770 SoC support
  - Use common command line handling code
  - Add DT vendor prefix to GCW (Game Consoles Worldwide)
 
 Loongson:
  - Add MAINTAINERS entry for Loongson2 and Loongson3 platforms
  - Drop 32-bit support for Loongson 2E/2F devices
  - Fix build failures due to multiple use of "MEM_RESERVED"
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEd80NauSabkiESfLYbAtpk944dnoFAlp64ZUACgkQbAtpk944
 dnrXrg//UPWeZMye/uHw0eEeJJjybyA0IWpJ6M94gbHxpduhQsjYU3CR9U4ZBmhs
 feY53dahh0RCR0k28EF8DEPkoUbGFKmyYCnvqAuatq1XOjAZtlgS9+VVzbK+Iswm
 XkZD1MBoZ49o0meyjQrH/2Ri/t6tHuzo0G2WtRJ8FnVruN9ymG6D5pR4Y31gDucb
 6JkTXjNfRJIKd0qJgP+c3HdlKE7jlnCTJnzHdA+5FbZVwKbm2/6KxbQo5Gc1BXJX
 4j7I4nJ0FIz0cB6fHbcccFSW9w3lPa9bQ4XpYPJYE6a36QldFvMWHRxvI6rxrACN
 5mPqIB9uqvtW8sdUbJtNRXFlNnm8XZzvsNqP6WxGQPW70+q2camni9W/gC1ifQsF
 +uVV54yj3Ky8xQNbbpfbDp/tFXRuLtj3DV4/a3dwA5J0YGEuMn1zzV5WTTzymFVn
 3NKl62LDUlzBNw0d1lUPMY6P1oKcNnRhLxBq0cxaB7AdOLF0jlCQ/wYUhXPpblj6
 CQB4cupR4IMvL7FZ1RS98e1RHaF8mXpaZBnGXT251DxZEre9OXCJxDdzqemedTVi
 SaCcvQqApCQD8OihL+wHZLew8Vp4EvwGAa++Evu/Ot4rWjY/9MGLtewYk8jkOEf6
 qk30dDn86ou29HNwpzfWadIq5Zew+QftifGOzTcuzgrJXXt+jH8=
 =7iwT
 -----END PGP SIGNATURE-----

Merge tag 'mips_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips

Pull MIPS updates from James Hogan:
 "These are the main MIPS changes for 4.16.

  Rough overview:

   (1) Basic support for the Ingenic JZ4770 based GCW Zero open-source
       handheld video game console

   (2) Support for the Ranchu board (used by Android emulator)

   (3) Various cleanups and misc improvements

  More detailed summary:

  Fixes:
   - Fix generic platform's USB_*HCI_BIG_ENDIAN selects (4.9)
   - Fix vmlinuz default build when ZBOOT selected
   - Fix clean up of vmlinuz targets
   - Fix command line duplication (in preparation for Ingenic JZ4770)

  Miscellaneous:
   - Allow Processor ID reads to be to be optimised away by the compiler
     (improves performance when running in guest)
   - Push ARCH_MIGHT_HAVE_PC_SERIO/PARPORT down to platform level to
     disable on generic platform with Ranchu board support
   - Add helpers for assembler macro instructions for older assemblers
   - Use assembler macro instructions to support VZ, XPA & MSA
     operations on older assemblers, removing C wrapper duplication
   - Various improvements to VZ & XPA assembly wrappers
   - Add drivers/platform/mips/ to MIPS MAINTAINERS entry

  Minor cleanups:
   - Misc FPU emulation cleanups (removal of unnecessary include, moving
     macros to common header, checkpatch and sparse fixes)
   - Remove duplicate assignment of core in play_dead()
   - Remove duplication in watchpoint handling
   - Remove mips_dma_mapping_error() stub
   - Use NULL instead of 0 in prepare_ftrace_return()
   - Use proper kernel-doc Return keyword for
     __compute_return_epc_for_insn()
   - Remove duplicate semicolon in csum_fold()

  Platform support:

  Broadcom:
   - Enable ZBOOT on BCM47xx

  Generic platform:
   - Add Ranchu board support, used by Android emulator
   - Fix machine compatible string matching for Ranchu
   - Support GIC in EIC mode

  Ingenic platforms:
   - Add DT, defconfig and other support for JZ4770 SoC and GCW Zero
   - Support dynamnic machine types (i.e. JZ4740 / JZ4770 / JZ4780)
   - Add Ingenic JZ4770 CGU clocks
   - General Ingenic clk changes to prepare for JZ4770 SoC support
   - Use common command line handling code
   - Add DT vendor prefix to GCW (Game Consoles Worldwide)

  Loongson:
   - Add MAINTAINERS entry for Loongson2 and Loongson3 platforms
   - Drop 32-bit support for Loongson 2E/2F devices
   - Fix build failures due to multiple use of 'MEM_RESERVED'"

* tag 'mips_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (53 commits)
  MIPS: Malta: Sanitize mouse and keyboard configuration.
  MIPS: Update defconfigs after previous patch.
  MIPS: Push ARCH_MIGHT_HAVE_PC_SERIO down to platform level
  MIPS: Push ARCH_MIGHT_HAVE_PC_PARPORT down to platform level
  MIPS: SMP-CPS: Remove duplicate assignment of core in play_dead
  MIPS: Generic: Support GIC in EIC mode
  MIPS: generic: Fix Makefile alignment
  MIPS: generic: Fix ranchu_of_match[] termination
  MIPS: generic: Fix machine compatible matching
  MIPS: Loongson fix name confict - MEM_RESERVED
  MIPS: bcm47xx: enable ZBOOT support
  MIPS: Fix trailing semicolon
  MIPS: Watch: Avoid duplication of bits in mips_read_watch_registers
  MIPS: Watch: Avoid duplication of bits in mips_install_watch_registers.
  MIPS: MSA: Update helpers to use new asm macros
  MIPS: XPA: Standardise readx/writex accessors
  MIPS: XPA: Allow use of $0 (zero) to MTHC0
  MIPS: XPA: Use XPA instructions in assembly
  MIPS: VZ: Pass GC0 register names in $n format
  MIPS: VZ: Update helpers to use new asm macros
  ...
 2018-02-07 11:22:44 -08:00
Stephen Boyd
c43a52cfd2 Merge branches 'clk-aspeed', 'clk-lock-UP', 'clk-mediatek' and 'clk-allwinner' into clk-next 
* clk-aspeed:
  clk: aspeed: Handle inverse polarity of USB port 1 clock gate
  clk: aspeed: Fix return value check in aspeed_cc_init()
  clk: aspeed: Add reset controller
  clk: aspeed: Register gated clocks
  clk: aspeed: Add platform driver and register PLLs
  clk: aspeed: Register core clocks
  clk: Add clock driver for ASPEED BMC SoCs
  dt-bindings: clock: Add ASPEED constants

* clk-lock-UP:
  clk: fix reentrancy of clk_enable() on UP systems

* clk-mediatek:
  clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built
  clk: mediatek: Fix all warnings for missing struct clk_onecell_data
  clk: mediatek: fixup test-building of MediaTek clock drivers
  clk: mediatek: group drivers under indpendent menu

* clk-allwinner:
  clk: sunxi-ng: a83t: Add M divider to TCON1 clock
  clk: sunxi-ng: fix the A64/H5 clock description of DE2 CCU
  clk: sunxi-ng: add support for Allwinner H3 DE2 CCU
  dt-bindings: fix the binding of Allwinner DE2 CCU of A83T and H3
  clk: sunxi-ng: sun8i: a83t: Use sigma-delta modulation for audio PLL
  clk: sunxi-ng: sun8i: a83t: Add /2 fixed post divider to audio PLL
  clk: sunxi-ng: Support fixed post-dividers on NM style clocks
  clk: sunxi-ng: sun50i: a64: Add 2x fixed post-divider to MMC module clocks
  clk: sunxi-ng: Support fixed post-dividers on MP style clocks
  clk: sunxi: Use PTR_ERR_OR_ZERO()
 2018-01-26 16:43:39 -08:00
Stephen Boyd
4d1d13a5ae Merge branches 'clk-remove-asm-clkdev', 'clk-debugfs-fixes', 'clk-renesas' and 'clk-meson' into clk-next 
* clk-remove-asm-clkdev:
  clk: Move __clk_{get,put}() into private clk.h API
  clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks
  arch: Remove clkdev.h asm-generic from Kbuild
  clk: Prepare to remove asm-generic/clkdev.h
  blackfin: Use generic clkdev.h header

* clk-debugfs-fixes:
  clk: Simplify debugfs registration
  clk: Fix debugfs_create_*() usage
  clk: Show symbolic clock flags in debugfs
  clk: Improve flags doc for of_clk_detect_critical()

* clk-renesas:
  clk: renesas: r8a7796: Add FDP clock
  clk: renesas: cpg-mssr: Keep wakeup sources active during system suspend
  clk: renesas: mstp: Keep wakeup sources active during system suspend
  clk: renesas: r8a77970: Add LVDS clock

* clk-meson:
  clk: meson-axg: fix potential NULL dereference in axg_clkc_probe()
  clk: meson-axg: make local symbol axg_gp0_params_table static
  clk: meson-axg: fix return value check in axg_clkc_probe()
  clk: meson: mpll: use 64-bit maths in params_from_rate
  clk: meson-axg: add clock controller drivers
  clk: meson-axg: add clocks dt-bindings required header
  dt-bindings: clock: add compatible variant for the Meson-AXG
  clk: meson: make the spinlock naming more specific
  clk: meson: gxbb: remove IGNORE_UNUSED from mmc clocks
  clk: meson: gxbb: fix wrong clock for SARADC/SANA
 2018-01-26 16:43:32 -08:00
Stephen Boyd
21170e3bda Merge branches 'clk-spreadtrum', 'clk-mvebu-dvfs', 'clk-qoriq', 'clk-imx' and 'clk-qcom-ipq8074' into clk-next 
* clk-spreadtrum:
  clk: sprd: add clocks support for SC9860
  clk: sprd: Add dt-bindings include file for SC9860
  dt-bindings: Add Spreadtrum clock binding documentation
  clk: sprd: add adjustable pll support
  clk: sprd: add composite clock support
  clk: sprd: add divider clock support
  clk: sprd: add mux clock support
  clk: sprd: add gate clock support
  clk: sprd: Add common infrastructure
  clk: move clock common macros out from vendor directories

* clk-mvebu-dvfs:
  clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks
  clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS
  clk: mvebu: armada-37xx-periph: cosmetic changes

* clk-qoriq:
  clk: qoriq: add more divider clocks support

* clk-imx:
  clk: imx51: uart4, uart5 gates only exist on imx50, imx53

* clk-qcom-ipq8074:
  clk: qcom: ipq8074: add misc resets for PCIE and NSS
  dt-bindings: clock: qcom: add misc resets for PCIE and NSS
  clk: qcom: ipq8074: add GP and Crypto clocks
  clk: qcom: ipq8074: add NSS ethernet port clocks
  clk: qcom: ipq8074: add NSS clocks
  clk: qcom: ipq8074: add PCIE, USB and SDCC clocks
  clk: qcom: ipq8074: add remaining PLL’s
  dt-bindings: clock: qcom: add remaining clocks for IPQ8074
  clk: qcom: ipq8074: fix missing GPLL0 divider width
  clk: qcom: add parent map for regmap mux
  clk: qcom: add read-only divider operations
 2018-01-26 16:41:47 -08:00
Paul Cercueil
b28a4b8eb9
dt-bindings: clock: Add jz4770-cgu.h header 
This will be used from the devicetree bindings to specify the clocks
that should be obtained from the jz4770-cgu driver.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Maarten ter Huurne <maarten@treewalker.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18481/
Signed-off-by: James Hogan <jhogan@kernel.org>
 2018-01-18 22:05:42 +00:00
Abhishek Sahu
e1f34e4f27 dt-bindings: clock: qcom: add misc resets for PCIE and NSS 
PCIE and NSS has MISC reset register in which single register has
multiple reset bit. The patch adds the DT bindings for these MISC
resets.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
 2017-12-21 16:03:38 -08:00
Abhishek Sahu
8c1c2c5a96 dt-bindings: clock: qcom: add remaining clocks for IPQ8074 
This patch adds the DT bindings for following IPQ8074 clocks

 - General PLL’s, NSS UBI PLL and NSS Crypto PLL.
 - 2 instances of PCIE, USB, SDCC.
 - 2 NSS UBI core and common NSS clocks. NSS is network switching
   system which accelerates the ethernet traffic. IPQ8074
   NSS has two UBI cores. Some clocks are separate for each UBI core
   and remaining NSS clocks are common.
 - NSS ethernet port clocks. IPQ8074 has 6 ethernet ports and
   each port uses different TX and RX clocks.
 - Crypto engine clocks.
 - General purpose clocks which comes over GPIO.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
 2017-12-21 16:03:28 -08:00
Chunyan Zhang
bf4439452b clk: sprd: Add dt-bindings include file for SC9860 
This file defines all SC9860 clock indexes, it should be included in the
device tree in which there's device using the clocks.

Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
 2017-12-21 15:00:54 -08:00
Joel Stanley
70dad67ab1 dt-bindings: clock: Add ASPEED constants 
These will be used by the clock driver and device trees.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
 2017-12-21 14:03:04 +10:30
Qiufang Dai
7e5c90e0ed clk: meson-axg: add clocks dt-bindings required header 
Add the required header for the clocks ID dt-bindings
exported from various subsystem in the Meson-AXG SoC.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
 2017-12-14 10:14:20 +01:00
Stephen Boyd
90552a6f93 Merge branch '4.15-rc1-clkctrl-driver' of https://github.com/t-kristo/linux-pm into clk-next 
* '4.15-rc1-clkctrl-driver' of https://github.com/t-kristo/linux-pm: (28 commits)
  clk: ti: omap4: clkctrl data fixes for opt-clocks
  clk: ti: dm816: add clkctrl clock data
  dt-bindings: clk: add dm816 clkctrl definitions
  clk: ti: dm814: add clkctrl clock data
  dt-bindings: clk: add dm814 clkctrl definitions
  clk: ti: am43xx: add clkctrl clock data
  dt-bindings: clk: add am43xx clkctrl definitions
  clk: ti: am33xx: add clkctrl clock data
  dt-bindings: clk: add am33xx clkctrl definitions
  clk: ti: dra7: add clkctrl clock data
  dt-bindings: clk: add dra7 clkctrl definitions
  clk: ti: omap5: add clkctrl clock data
  dt-bindings: clk: add omap5 clkctrl definitions
  clk: ti: omap3: cleanup unnecessary clock aliases
  clk: ti: am43xx: cleanup unnecessary clock aliases
  clk: ti: am33xx: cleanup unnecessary clock aliases
  clk: ti: dm816x: cleanup unnecessary clock aliases
  clk: ti: dm814x: cleanup unnecessary clock aliases
  clk: ti: omap5: cleanup unnecessary clock aliases
  clk: ti: dra7: drop unnecessary clock aliases
  ...
 2017-12-06 23:09:59 -08:00
Leo Yan
a4a124c349 dt-bindings: clk: Hi3660: Document stub clock 
Document the DT binding for stub clock which is used for CPU,
GPU and DDR frequency scaling.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
 2017-12-06 22:54:37 -08:00
Tero Kristo
5afc8dde9a dt-bindings: clk: add dm816 clkctrl definitions 
Contains offsets for all dm816 clkctrl main and optional clocks.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
 2017-12-01 15:18:04 +02:00
Tero Kristo
fe4ec6513e dt-bindings: clk: add dm814 clkctrl definitions 
Contains offsets for all dm814 clkctrl main and optional clocks.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
 2017-12-01 15:17:57 +02:00
Tero Kristo
9bc01114b1 dt-bindings: clk: add am43xx clkctrl definitions 
Contains offsets for all am43xx clkctrl main and optional clocks.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
 2017-12-01 15:17:28 +02:00
Tero Kristo
172c48c7d1 dt-bindings: clk: add am33xx clkctrl definitions 
Contains offsets for all am33xx clkctrl main and optional clocks.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
 2017-12-01 15:17:23 +02:00
Tero Kristo
ae263d5276 dt-bindings: clk: add dra7 clkctrl definitions 
Contains offsets for all dra7 clkctrl main and optional clocks.

Signed-off-by: Tero Kristo <t-kristo@ti.com>
 2017-12-01 15:17:18 +02:00