Commit Graph

108 Commits

Author SHA1 Message Date
Linus Torvalds
668c35f69c Kbuild updates for v4.21
Kbuild core:
  - remove unneeded $(call cc-option,...) switches
  - consolidate Clang compiler flags into CLANG_FLAGS
  - announce the deprecation of SUBDIRS
  - fix single target build for external module
  - simplify the dependencies of 'prepare' stage targets
  - allow fixdep to directly write to .*.cmd files
  - simplify dependency generation for CONFIG_TRIM_UNUSED_KSYMS
  - change if_changed_rule to accept multi-line recipe
  - move .SECONDARY special target to scripts/Kbuild.include
  - remove redundant 'set -e'
  - improve parallel execution for CONFIG_HEADERS_CHECK
  - misc cleanups
 
 Treewide fixes and cleanups
  - set Clang flags correctly for PowerPC boot images
  - fix UML build error with CONFIG_GCC_PLUGINS
  - remove unneeded patterns from .gitignore files
  - refactor firmware/Makefile
  - remove unneeded rules for *offsets.s
  - avoid unneeded regeneration of intermediate .s files
  - clean up ./Kbuild
 
 Modpost:
  - remove unused -M, -K options
  - fix false positive warnings about section mismatch
  - use simple devtable lookup instead of linker magic
  - misc cleanups
 
 Coccinelle:
  - relax boolinit.cocci checks for overall consistency
  - fix warning messages of boolinit.cocci
 
 Other tools:
  - improve -dirty check of scripts/setlocalversion
  - add a tool to generate compile_commands.json from .*.cmd files
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJcJiVeAAoJED2LAQed4NsGXEMP/1fdkBfZGxYlxp4w1tEBeRKZ
 GInxxMfHiHZlu7nFPQ3k1mncczZjeLbnKcLaybnPmqBSfQe1F7tN0ux1sHtWkVfI
 DvqoKaHObZ3lEMEVxCHXQ2bKrN/j9nB2xSxzr4dvc9DscW8dwKElZuKVE7nHKdhl
 z70xsalxHGEGY6hptJrucbv8KTBOSleZ8Gaat79sEDkDSLCTjxXB3WcVMWqDT0M/
 IqN5QCwiPjZC3UCwuqq6+vnG1gyvDUORcbrVgHrBIKxLYAABYzugB5IlLpi8B31C
 ZUDmijSTandHd4SG5gw5uZoyYuK4YhZeI7g4yNyXSqnPurmcJxrGdpiuwRcE7xet
 5yB2uaNbAFO6Fbz4gUdDEvryA9IZEPPn1Z0Btfpp7UOxiWEqE61oHReCNdkiad94
 Oonl+ROZw5UOT3AZD3xCZTf9bTnQoCFccHTmnbaKqqSiDWxxLUXum7sNfnJ6GXEb
 fNQDuwuxtsPStaWoU93QNrGyl5e8jYTKFdphUCnZZ2/hE8ygoQ06PYmeBAk+UKfN
 UI2IqR8PHgmA97XJg+fHhbw6X4nQcPsg/usLqxGItAZNO2O4uXgaN24dOcHG74Bu
 2Dk/gQQB2sVB/Dxfmlaxvvj98MVg7IMtpusAT2bQ7miiSS3EqPFT8KQMZYLICWuZ
 u7QQe20yCho3ZULmsRwH
 =0PCt
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:
 "Kbuild core:
   - remove unneeded $(call cc-option,...) switches
   - consolidate Clang compiler flags into CLANG_FLAGS
   - announce the deprecation of SUBDIRS
   - fix single target build for external module
   - simplify the dependencies of 'prepare' stage targets
   - allow fixdep to directly write to .*.cmd files
   - simplify dependency generation for CONFIG_TRIM_UNUSED_KSYMS
   - change if_changed_rule to accept multi-line recipe
   - move .SECONDARY special target to scripts/Kbuild.include
   - remove redundant 'set -e'
   - improve parallel execution for CONFIG_HEADERS_CHECK
   - misc cleanups

  Treewide fixes and cleanups
   - set Clang flags correctly for PowerPC boot images
   - fix UML build error with CONFIG_GCC_PLUGINS
   - remove unneeded patterns from .gitignore files
   - refactor firmware/Makefile
   - remove unneeded rules for *offsets.s
   - avoid unneeded regeneration of intermediate .s files
   - clean up ./Kbuild

  Modpost:
   - remove unused -M, -K options
   - fix false positive warnings about section mismatch
   - use simple devtable lookup instead of linker magic
   - misc cleanups

  Coccinelle:
   - relax boolinit.cocci checks for overall consistency
   - fix warning messages of boolinit.cocci

  Other tools:
   - improve -dirty check of scripts/setlocalversion
   - add a tool to generate compile_commands.json from .*.cmd files"

* tag 'kbuild-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (51 commits)
  kbuild: remove unused cmd_gentimeconst
  kbuild: remove $(obj)/ prefixes in ./Kbuild
  treewide: add intermediate .s files to targets
  treewide: remove explicit rules for *offsets.s
  firmware: refactor firmware/Makefile
  firmware: remove unnecessary patterns from .gitignore
  scripts: remove unnecessary ihex2fw and check-lc_ctypes from .gitignore
  um: remove unused filechk_gen_header in Makefile
  scripts: add a tool to produce a compile_commands.json file
  kbuild: add -Werror=implicit-int flag unconditionally
  kbuild: add -Werror=strict-prototypes flag unconditionally
  kbuild: add -fno-PIE flag unconditionally
  scripts: coccinelle: Correct warning message
  scripts: coccinelle: only suggest true/false in files that already use them
  kbuild: handle part-of-module correctly for *.ll and *.symtypes
  kbuild: refactor part-of-module
  kbuild: refactor quiet_modtag
  kbuild: remove redundant quiet_modtag for $(obj-m)
  kbuild: refactor Makefile.asm-generic
  user/Makefile: Fix typo and capitalization in comment section
  ...
2018-12-29 12:03:17 -08:00
Masahiro Yamada
8e9b61b293 kbuild: move .SECONDARY special target to Kbuild.include
In commit 54a702f705 ("kbuild: mark $(targets) as .SECONDARY and
remove .PRECIOUS markers"), I missed one important feature of the
.SECONDARY target:

    .SECONDARY with no prerequisites causes all targets to be
    treated as secondary.

... which agrees with the policy of Kbuild.

Let's move it to scripts/Kbuild.include, with no prerequisites.

Note:
If an intermediate file is generated by $(call if_changed,...), you
still need to add it to "targets" so its .*.cmd file is included.

The arm/arm64 crypto files are generated by $(call cmd,shipped),
so they do not need to be added to "targets", but need to be added
to "clean-files" so "make clean" can properly clean them away.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-12-02 14:11:49 +09:00
Eric Biggers
16aae3595a crypto: arm/nhpoly1305 - add NEON-accelerated NHPoly1305
Add an ARM NEON implementation of NHPoly1305, an ε-almost-∆-universal
hash function used in the Adiantum encryption mode.  For now, only the
NH portion is actually NEON-accelerated; the Poly1305 part is less
performance-critical so is just implemented in C.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-20 14:26:56 +08:00
Eric Biggers
bdb063a79f crypto: arm/chacha - add XChaCha12 support
Now that the 32-bit ARM NEON implementation of ChaCha20 and XChaCha20
has been refactored to support varying the number of rounds, add support
for XChaCha12.  This is identical to XChaCha20 except for the number of
rounds, which is 12 instead of 20.

XChaCha12 is faster than XChaCha20 but has a lower security margin,
though still greater than AES-256's since the best known attacks make it
through only 7 rounds.  See the patch "crypto: chacha - add XChaCha12
support" for more details about why we need XChaCha12 support.

Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-20 14:26:56 +08:00
Eric Biggers
3cc215198e crypto: arm/chacha20 - refactor to allow varying number of rounds
In preparation for adding XChaCha12 support, rename/refactor the NEON
implementation of ChaCha20 to support different numbers of rounds.

Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-20 14:26:56 +08:00
Eric Biggers
d97a94309d crypto: arm/chacha20 - add XChaCha20 support
Add an XChaCha20 implementation that is hooked up to the ARM NEON
implementation of ChaCha20.  This is needed for use in the Adiantum
encryption mode; see the generic code patch,
"crypto: chacha20-generic - add XChaCha20 support", for more details.

We also update the NEON code to support HChaCha20 on one block, so we
can use that in XChaCha20 rather than calling the generic HChaCha20.
This required factoring the permutation out into its own macro.

Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-20 14:26:56 +08:00
Eric Biggers
be2830b15b crypto: arm/chacha20 - limit the preemption-disabled section
To improve responsivesess, disable preemption for each step of the walk
(which is at most PAGE_SIZE) rather than for the entire
encryption/decryption operation.

Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-20 14:26:56 +08:00
Eric Biggers
1ca1b91794 crypto: chacha20-generic - refactor to allow varying number of rounds
In preparation for adding XChaCha12 support, rename/refactor
chacha20-generic to support different numbers of rounds.  The
justification for needing XChaCha12 support is explained in more detail
in the patch "crypto: chacha - add XChaCha12 support".

The only difference between ChaCha{8,12,20} are the number of rounds
itself; all other parts of the algorithm are the same.  Therefore,
remove the "20" from all definitions, structures, functions, files, etc.
that will be shared by all ChaCha versions.

Also make ->setkey() store the round count in the chacha_ctx (previously
chacha20_ctx).  The generic code then passes the round count through to
chacha_block().  There will be a ->setkey() function for each explicitly
allowed round count; the encrypt/decrypt functions will be the same.  I
decided not to do it the opposite way (same ->setkey() function for all
round counts, with different encrypt/decrypt functions) because that
would have required more boilerplate code in architecture-specific
implementations of ChaCha and XChaCha.

Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-20 14:26:55 +08:00
Brajeswar Ghosh
d65ddecbea crypto: aes-ce - Remove duplicate header
Remove asm/hwcap.h which is included more than once

Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16 14:09:40 +08:00
Eric Biggers
913a3aa07d crypto: arm/aes - add some hardening against cache-timing attacks
Make the ARM scalar AES implementation closer to constant-time by
disabling interrupts and prefetching the tables into L1 cache.  This is
feasible because due to ARM's "free" rotations, the main tables are only
1024 bytes instead of the usual 4096 used by most AES implementations.

On ARM Cortex-A7, the speed loss is only about 5%.  The resulting code
is still over twice as fast as aes_ti.c.  Responsiveness is potentially
a concern, but interrupts are only disabled for a single AES block.

Note that even after these changes, the implementation still isn't
necessarily guaranteed to be constant-time; see
https://cr.yp.to/antiforgery/cachetiming-20050414.pdf for a discussion
of the many difficulties involved in writing truly constant-time AES
software.  But it's valuable to make such attacks more difficult.

Much of this patch is based on patches suggested by Ard Biesheuvel.

Suggested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-09 17:36:48 +08:00
Stefan Agner
cd560235d8 crypto: arm/crc32 - avoid warning when compiling with Clang
The table id (second) argument to MODULE_DEVICE_TABLE is often
referenced otherwise. This is not the case for CPU features. This
leads to a warning when building the kernel with Clang:
  arch/arm/crypto/crc32-ce-glue.c:239:33: warning: variable
    'crc32_cpu_feature' is not needed and will not be emitted
    [-Wunneeded-internal-declaration]
  static const struct cpu_feature crc32_cpu_feature[] = {
                                  ^

Avoid warnings by using __maybe_unused, similar to commit 1f318a8baf
("modules: mark __inittest/__exittest as __maybe_unused").

Fixes: 2a9faf8b7e ("crypto: arm/crc32 - enable module autoloading based on CPU feature bits")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-21 13:24:52 +08:00
Eric Biggers
a1b22a5f45 crypto: arm/chacha20 - faster 8-bit rotations and other optimizations
Optimize ChaCha20 NEON performance by:

- Implementing the 8-bit rotations using the 'vtbl.8' instruction.
- Streamlining the part that adds the original state and XORs the data.
- Making some other small tweaks.

On ARM Cortex-A7, these optimizations improve ChaCha20 performance from
about 12.08 cycles per byte to about 11.37 -- a 5.9% improvement.

There is a tradeoff involved with the 'vtbl.8' rotation method since
there is at least one CPU (Cortex-A53) where it's not fastest.  But it
seems to be a better default; see the added comment.  Overall, this
patch reduces Cortex-A53 performance by less than 0.5%.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-04 11:37:05 +08:00
Ard Biesheuvel
00227e3a1d crypto: arm/ghash-ce - implement support for 4-way aggregation
Speed up the GHASH algorithm based on 64-bit polynomial multiplication
by adding support for 4-way aggregation. This improves throughput by
~85% on Cortex-A53, from 1.7 cycles per byte to 0.9 cycles per byte.

When combined with AES into GCM, throughput improves by ~25%, from
3.8 cycles per byte to 3.0 cycles per byte.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-04 11:37:04 +08:00
Jason A. Donenfeld
578bdaabd0 crypto: speck - remove Speck
These are unused, undesired, and have never actually been used by
anybody. The original authors of this code have changed their mind about
its inclusion. While originally proposed for disk encryption on low-end
devices, the idea was discarded [1] in favor of something else before
that could really get going. Therefore, this patch removes Speck.

[1] https://marc.info/?l=linux-crypto-vger&m=153359499015659

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Eric Biggers <ebiggers@google.com>
Cc: stable@vger.kernel.org
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-09-04 11:35:03 +08:00
Arnd Bergmann
3723c63247 treewide: convert ISO_8859-1 text comments to utf-8
Almost all files in the kernel are either plain text or UTF-8 encoded.  A
couple however are ISO_8859-1, usually just a few characters in a C
comments, for historic reasons.

This converts them all to UTF-8 for consistency.

Link: http://lkml.kernel.org/r/20180724111600.4158975-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Simon Horman <horms@verge.net.au>			[IPVS portion]
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>	[IIO]
Acked-by: Michael Ellerman <mpe@ellerman.id.au>			[powerpc]
Acked-by: Rob Herring <robh@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-23 18:48:43 -07:00
Eric Biggers
4e34e51f48 crypto: arm/chacha20 - always use vrev for 16-bit rotates
The 4-way ChaCha20 NEON code implements 16-bit rotates with vrev32.16,
but the one-way code (used on remainder blocks) implements it with
vshl + vsri, which is slower.  Switch the one-way code to vrev32.16 too.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-08-03 18:06:05 +08:00
Herbert Xu
c5f5aeef9b Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux
Merge mainline to pick up c7513c2a27 ("crypto/arm64: aes-ce-gcm -
add missing kernel_neon_begin/end pair").
2018-08-03 17:55:12 +08:00
Eric Biggers
c87a405e3b crypto: ahash - remove useless setting of cra_type
Some ahash algorithms set .cra_type = &crypto_ahash_type.  But this is
redundant with the C structure type ('struct ahash_alg'), and
crypto_register_ahash() already sets the .cra_type automatically.
Apparently the useless assignment has just been copy+pasted around.

So, remove the useless assignment from all the ahash algorithms.

This patch shouldn't change any actual behavior.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-09 00:30:26 +08:00
Eric Biggers
6a38f62245 crypto: ahash - remove useless setting of type flags
Many ahash algorithms set .cra_flags = CRYPTO_ALG_TYPE_AHASH.  But this
is redundant with the C structure type ('struct ahash_alg'), and
crypto_register_ahash() already sets the type flag automatically,
clearing any type flag that was already there.  Apparently the useless
assignment has just been copy+pasted around.

So, remove the useless assignment from all the ahash algorithms.

This patch shouldn't change any actual behavior.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-09 00:30:25 +08:00
Eric Biggers
e50944e219 crypto: shash - remove useless setting of type flags
Many shash algorithms set .cra_flags = CRYPTO_ALG_TYPE_SHASH.  But this
is redundant with the C structure type ('struct shash_alg'), and
crypto_register_shash() already sets the type flag automatically,
clearing any type flag that was already there.  Apparently the useless
assignment has just been copy+pasted around.

So, remove the useless assignment from all the shash algorithms.

This patch shouldn't change any actual behavior.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-09 00:30:24 +08:00
Eric Biggers
a068b94d74 crypto: arm/speck - fix building in Thumb2 mode
Building the kernel with CONFIG_THUMB2_KERNEL=y and
CONFIG_CRYPTO_SPECK_NEON set fails with the following errors:

    arch/arm/crypto/speck-neon-core.S: Assembler messages:

    arch/arm/crypto/speck-neon-core.S:419: Error: r13 not allowed here -- `bic sp,#0xf'
    arch/arm/crypto/speck-neon-core.S:423: Error: r13 not allowed here -- `bic sp,#0xf'
    arch/arm/crypto/speck-neon-core.S:427: Error: r13 not allowed here -- `bic sp,#0xf'
    arch/arm/crypto/speck-neon-core.S:431: Error: r13 not allowed here -- `bic sp,#0xf'

The problem is that the 'bic' instruction can't operate on the 'sp'
register in Thumb2 mode.  Fix it by using a temporary register.  This
isn't in the main loop, so the performance difference is negligible.
This also matches what aes-neonbs-core.S does.

Reported-by: Stefan Agner <stefan@agner.ch>
Fixes: ede9622162 ("crypto: arm/speck - add NEON-accelerated implementation of Speck-XTS")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-07-01 23:31:46 +08:00
Adam Langley
c2e415fe75 crypto: clarify licensing of OpenSSL asm code
Several source files have been taken from OpenSSL. In some of them a
comment that "permission to use under GPL terms is granted" was
included below a contradictory license statement. In several cases,
there was no indication that the license of the code was compatible
with the GPLv2.

This change clarifies the licensing for all of these files. I've
confirmed with the author (Andy Polyakov) that a) he has licensed the
files with the GPLv2 comment under that license and b) that he's also
happy to license the other files under GPLv2 too. In one case, the
file is already contained in his CRYPTOGAMS bundle, which has a GPLv2
option, and so no special measures are needed.

In all cases, the license status of code has been clarified by making
the GPLv2 license prominent.

The .S files have been regenerated from the updated .pl files.

This is a comment-only change. No code is changed.

Signed-off-by: Adam Langley <agl@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-31 00:13:44 +08:00
Masahiro Yamada
54a702f705 kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers
GNU Make automatically deletes intermediate files that are updated
in a chain of pattern rules.

Example 1) %.dtb.o <- %.dtb.S <- %.dtb <- %.dts
Example 2) %.o <- %.c <- %.c_shipped

A couple of makefiles mark such targets as .PRECIOUS to prevent Make
from deleting them, but the correct way is to use .SECONDARY.

  .SECONDARY
    Prerequisites of this special target are treated as intermediate
    files but are never automatically deleted.

  .PRECIOUS
    When make is interrupted during execution, it may delete the target
    file it is updating if the file was modified since make started.
    If you mark the file as precious, make will never delete the file
    if interrupted.

Both can avoid deletion of intermediate files, but the difference is
the behavior when Make is interrupted; .SECONDARY deletes the target,
but .PRECIOUS does not.

The use of .PRECIOUS is relatively rare since we do not want to keep
partially constructed (possibly corrupted) targets.

Another difference is that .PRECIOUS works with pattern rules whereas
.SECONDARY does not.

  .PRECIOUS: $(obj)/%.lex.c

works, but

  .SECONDARY: $(obj)/%.lex.c

has no effect.  However, for the reason above, I do not want to use
.PRECIOUS which could cause obscure build breakage.

The targets specified as .SECONDARY must be explicit.  $(targets)
contains all targets that need to include .*.cmd files.  So, the
intermediates you want to keep are mostly in there.  Therefore, mark
$(targets) as .SECONDARY.  It means primary targets are also marked
as .SECONDARY, but I do not see any drawback for this.

I replaced some .SECONDARY / .PRECIOUS markers with 'targets'.  This
will make Kbuild search for non-existing .*.cmd files, but this is
not a noticeable performance issue.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
2018-04-07 19:04:02 +09:00
Leonard Crestez
6aaf49b495 crypto: arm,arm64 - Fix random regeneration of S_shipped
The decision to rebuild .S_shipped is made based on the relative
timestamps of .S_shipped and .pl files but git makes this essentially
random. This means that the perl script might run anyway (usually at
most once per checkout), defeating the whole purpose of _shipped.

Fix by skipping the rule unless explicit make variables are provided:
REGENERATE_ARM_CRYPTO or REGENERATE_ARM64_CRYPTO.

This can produce nasty occasional build failures downstream, for example
for toolchains with broken perl. The solution is minimally intrusive to
make it easier to push into stable.

Another report on a similar issue here: https://lkml.org/lkml/2018/3/8/1379

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-23 23:43:19 +08:00
Eric Biggers
ede9622162 crypto: arm/speck - add NEON-accelerated implementation of Speck-XTS
Add an ARM NEON-accelerated implementation of Speck-XTS.  It operates on
128-byte chunks at a time, i.e. 8 blocks for Speck128 or 16 blocks for
Speck64.  Each 128-byte chunk goes through XTS preprocessing, then is
encrypted/decrypted (doing one cipher round for all the blocks, then the
next round, etc.), then goes through XTS postprocessing.

The performance depends on the processor but can be about 3 times faster
than the generic code.  For example, on an ARMv7 processor we observe
the following performance with Speck128/256-XTS:

    xts-speck128-neon:     Encryption 107.9 MB/s, Decryption 108.1 MB/s
    xts(speck128-generic): Encryption  32.1 MB/s, Decryption  36.6 MB/s

In comparison to AES-256-XTS without the Cryptography Extensions:

    xts-aes-neonbs:        Encryption  41.2 MB/s, Decryption  36.7 MB/s
    xts(aes-asm):          Encryption  31.7 MB/s, Decryption  30.8 MB/s
    xts(aes-generic):      Encryption  21.2 MB/s, Decryption  20.9 MB/s

Speck64/128-XTS is even faster:

    xts-speck64-neon:      Encryption 138.6 MB/s, Decryption 139.1 MB/s

Note that as with the generic code, only the Speck128 and Speck64
variants are supported.  Also, for now only the XTS mode of operation is
supported, to target the disk and file encryption use cases.  The NEON
code also only handles the portion of the data that is evenly divisible
into 128-byte chunks, with any remainder handled by a C fallback.  Of
course, other modes of operation could be added later if needed, and/or
the NEON code could be updated to handle other buffer sizes.

The XTS specification is only defined for AES which has a 128-bit block
size, so for the GF(2^64) math needed for Speck64-XTS we use the
reducing polynomial 'x^64 + x^4 + x^3 + x + 1' given by the original XEX
paper.  Of course, when possible users should use Speck128-XTS, but even
that may be too slow on some processors; Speck64-XTS can be faster.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-02-22 22:16:55 +08:00
Jinbum Park
4ff8b1dd81 crypto: arm/aes-cipher - move S-box to .rodata section
Move the AES inverse S-box to the .rodata section
where it is safe from abuse by speculation.

Signed-off-by: Jinbum Park <jinb.park7@gmail.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-02-22 22:16:19 +08:00
Eric Biggers
a208fa8f33 crypto: hash - annotate algorithms taking optional key
We need to consistently enforce that keyed hashes cannot be used without
setting the key.  To do this we need a reliable way to determine whether
a given hash algorithm is keyed or not.  AF_ALG currently does this by
checking for the presence of a ->setkey() method.  However, this is
actually slightly broken because the CRC-32 algorithms implement
->setkey() but can also be used without a key.  (The CRC-32 "key" is not
actually a cryptographic key but rather represents the initial state.
If not overridden, then a default initial state is used.)

Prepare to fix this by introducing a flag CRYPTO_ALG_OPTIONAL_KEY which
indicates that the algorithm has a ->setkey() method, but it is not
required to be called.  Then set it on all the CRC-32 algorithms.

The same also applies to the Adler-32 implementation in Lustre.

Also, the cryptd and mcryptd templates have to pass through the flag
from their underlying algorithm.

Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-12 23:03:35 +11:00
Gomonovych, Vasyl
26d85e5f3b crypto: arm/aes-neonbs - Use PTR_ERR_OR_ZERO()
Fix ptr_ret.cocci warnings:
arch/arm/crypto/aes-neonbs-glue.c:184:1-3: WARNING: PTR_ERR_OR_ZERO can be used
arch/arm/crypto/aes-neonbs-glue.c:261:1-3: WARNING: PTR_ERR_OR_ZERO can be used

Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Generated by: scripts/coccinelle/api/ptr_ret.cocci

Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-11 22:36:56 +11:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Ard Biesheuvel
0d149ce67d crypto: arm/aes - avoid expanded lookup tables in the final round
For the final round, avoid the expanded and padded lookup tables
exported by the generic AES driver. Instead, for encryption, we can
perform byte loads from the same table we used for the inner rounds,
which will still be hot in the caches. For decryption, use the inverse
AES Sbox directly, which is 4x smaller than the inverse lookup table
exported by the generic driver.

This should significantly reduce the Dcache footprint of our code,
which makes the code more robust against timing attacks. It does not
introduce any additional module dependencies, given that we already
rely on the core AES module for the shared key expansion routines.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-08-04 09:27:25 +08:00
Ard Biesheuvel
3759ee0572 crypto: arm/ghash - add NEON accelerated fallback for vmull.p64
Implement a NEON fallback for systems that do support NEON but have
no support for the optional 64x64->128 polynomial multiplication
instruction that is part of the ARMv8 Crypto Extensions. It is based
on the paper "Fast Software Polynomial Multiplication on ARM Processors
Using the NEON Engine" by Danilo Camara, Conrado Gouvea, Julio Lopez and
Ricardo Dahab (https://hal.inria.fr/hal-01506572)

On a 32-bit guest executing under KVM on a Cortex-A57, the new code is
not only 4x faster than the generic table based GHASH driver, it is also
time invariant. (Note that the existing vmull.p64 code is 16x faster on
this core).

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-08-04 09:27:24 +08:00
Ard Biesheuvel
45fe93dff2 crypto: algapi - make crypto_xor() take separate dst and src arguments
There are quite a number of occurrences in the kernel of the pattern

  if (dst != src)
          memcpy(dst, src, walk.total % AES_BLOCK_SIZE);
  crypto_xor(dst, final, walk.total % AES_BLOCK_SIZE);

or

  crypto_xor(keystream, src, nbytes);
  memcpy(dst, keystream, nbytes);

where crypto_xor() is preceded or followed by a memcpy() invocation
that is only there because crypto_xor() uses its output parameter as
one of the inputs. To avoid having to add new instances of this pattern
in the arm64 code, which will be refactored to implement non-SIMD
fallbacks, add an alternative implementation called crypto_xor_cpy(),
taking separate input and output arguments. This removes the need for
the separate memcpy().

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-08-04 09:27:15 +08:00
Ard Biesheuvel
2a9faf8b7e crypto: arm/crc32 - enable module autoloading based on CPU feature bits
Make the module autoloadable by tying it to the CPU feature bits that
describe whether the optional instructions it relies on are implemented
by the current CPU.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-01 12:55:42 +08:00
Ard Biesheuvel
a83ff88bed crypto: arm/sha2-ce - enable module autoloading based on CPU feature bits
Make the module autoloadable by tying it to the CPU feature bit that
describes whether the optional instructions it relies on are implemented
by the current CPU.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-01 12:55:41 +08:00
Ard Biesheuvel
bd56f95ea9 crypto: arm/sha1-ce - enable module autoloading based on CPU feature bits
Make the module autoloadable by tying it to the CPU feature bit that
describes whether the optional instructions it relies on are implemented
by the current CPU.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-01 12:55:40 +08:00
Ard Biesheuvel
c9d9f608b4 crypto: arm/ghash-ce - enable module autoloading based on CPU feature bits
Make the module autoloadable by tying it to the CPU feature bit that
describes whether the optional instructions it relies on are implemented
by the current CPU.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-01 12:55:39 +08:00
Ard Biesheuvel
4d8061a591 crypto: arm/aes-ce - enable module autoloading based on CPU feature bits
Make the module autoloadable by tying it to the CPU feature bit that
describes whether the optional instructions it relies on are implemented
by the current CPU.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-01 12:55:38 +08:00
Ard Biesheuvel
b56f5cbc7e crypto: arm/aes-neonbs - resolve fallback cipher at runtime
Currently, the bit sliced NEON AES code for ARM has a link time
dependency on the scalar ARM asm implementation, which it uses as a
fallback to perform CBC encryption and the encryption of the initial
XTS tweak.

The bit sliced NEON code is both fast and time invariant, which makes
it a reasonable default on hardware that supports it. However, the
ARM asm code it pulls in is not time invariant, and due to the way it
is linked in, cannot be overridden by the new generic time invariant
driver. In fact, it will not be used at all, given that the ARM asm
code registers itself as a cipher with a priority that exceeds the
priority of the fixed time cipher.

So remove the link time dependency, and allocate the fallback cipher
via the crypto API. Note that this requires this driver's module_init
call to be replaced with late_initcall, so that the (possibly generic)
fallback cipher is guaranteed to be available when the builtin test
is performed at registration time.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-09 18:34:16 +08:00
Ard Biesheuvel
efa7cebdbf crypto: arm/crc32 - add build time test for CRC instruction support
The accelerated CRC32 module for ARM may use either the scalar CRC32
instructions, the NEON 64x64 to 128 bit polynomial multiplication
(vmull.p64) instruction, or both, depending on what the current CPU
supports.

However, this also requires support in binutils, and as it turns out,
versions of binutils exist that support the vmull.p64 instruction but
not the crc32 instructions.

So refactor the Makefile logic so that this module only gets built if
binutils has support for both.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-01 19:47:53 +08:00
Ard Biesheuvel
1fb1683cb3 crypto: arm/crc32 - fix build error with outdated binutils
Annotate a vmov instruction with an explicit element size of 32 bits.
This is inferred by recent toolchains, but apparently, older versions
need some help figuring this out.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-01 19:47:51 +08:00
Ard Biesheuvel
1a20b96612 crypto: arm/aes - don't use IV buffer to return final keystream block
The ARM bit sliced AES core code uses the IV buffer to pass the final
keystream block back to the glue code if the input is not a multiple of
the block size, so that the asm code does not have to deal with anything
except 16 byte blocks. This is done under the assumption that the outgoing
IV is meaningless anyway in this case, given that chaining is no longer
possible under these circumstances.

However, as it turns out, the CCM driver does expect the IV to retain
a value that is equal to the original IV except for the counter value,
and even interprets byte zero as a length indicator, which may result
in memory corruption if the IV is overwritten with something else.

So use a separate buffer to return the final keystream block.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-03 18:16:21 +08:00
Ard Biesheuvel
4a70b52620 crypto: arm/chacha20 - remove cra_alignmask
Remove the unnecessary alignmask: it is much more efficient to deal with
the misalignment in the core algorithm than relying on the crypto API to
copy the data to a suitably aligned buffer.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-03 18:16:19 +08:00
Ard Biesheuvel
1465fb13d3 crypto: arm/aes-ce - remove cra_alignmask
Remove the unnecessary alignmask: it is much more efficient to deal with
the misalignment in the core algorithm than relying on the crypto API to
copy the data to a suitably aligned buffer.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-03 18:16:16 +08:00
Ard Biesheuvel
13954e788d crypto: arm/aes-neonbs - fix issue with v2.22 and older assembler
The GNU assembler for ARM version 2.22 or older fails to infer the
element size from the vmov instructions, and aborts the build in
the following way;

.../aes-neonbs-core.S: Assembler messages:
.../aes-neonbs-core.S:817: Error: bad type for scalar -- `vmov q1h[1],r10'
.../aes-neonbs-core.S:817: Error: bad type for scalar -- `vmov q1h[0],r9'
.../aes-neonbs-core.S:817: Error: bad type for scalar -- `vmov q1l[1],r8'
.../aes-neonbs-core.S:817: Error: bad type for scalar -- `vmov q1l[0],r7'
.../aes-neonbs-core.S:818: Error: bad type for scalar -- `vmov q2h[1],r10'
.../aes-neonbs-core.S:818: Error: bad type for scalar -- `vmov q2h[0],r9'
.../aes-neonbs-core.S:818: Error: bad type for scalar -- `vmov q2l[1],r8'
.../aes-neonbs-core.S:818: Error: bad type for scalar -- `vmov q2l[0],r7'

Fix this by setting the element size explicitly, by replacing vmov with
vmov.32.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-23 22:50:25 +08:00
Ard Biesheuvel
658fa754cd crypto: arm/aes - avoid reserved 'tt' mnemonic in asm code
The ARMv8-M architecture introduces 'tt' and 'ttt' instructions,
which means we can no longer use 'tt' as a register alias on recent
versions of binutils for ARM. So replace the alias with 'ttab'.

Fixes: 81edb42629 ("crypto: arm/aes - replace scalar AES cipher")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-13 18:47:21 +08:00
Ard Biesheuvel
cc477bf645 crypto: arm/aes - replace bit-sliced OpenSSL NEON code
This replaces the unwieldy generated implementation of bit-sliced AES
in CBC/CTR/XTS modes that originated in the OpenSSL project with a
new version that is heavily based on the OpenSSL implementation, but
has a number of advantages over the old version:
- it does not rely on the scalar AES cipher that also originated in the
  OpenSSL project and contains redundant lookup tables and key schedule
  generation routines (which we already have in crypto/aes_generic.)
- it uses the same expanded key schedule for encryption and decryption,
  reducing the size of the per-key data structure by 1696 bytes
- it adds an implementation of AES in ECB mode, which can be wrapped by
  other generic chaining mode implementations
- it moves the handling of corner cases that are non critical to performance
  to the glue layer written in C
- it was written directly in assembler rather than generated from a Perl
  script

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-13 18:27:31 +08:00
Ard Biesheuvel
81edb42629 crypto: arm/aes - replace scalar AES cipher
This replaces the scalar AES cipher that originates in the OpenSSL project
with a new implementation that is ~15% (*) faster (on modern cores), and
reuses the lookup tables and the key schedule generation routines from the
generic C implementation (which is usually compiled in anyway due to
networking and other subsystems depending on it).

Note that the bit sliced NEON code for AES still depends on the scalar cipher
that this patch replaces, so it is not removed entirely yet.

* On Cortex-A57, the performance increases from 17.0 to 14.9 cycles per byte
  for 128-bit keys.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-13 00:26:50 +08:00
Ard Biesheuvel
afaf712e99 crypto: arm/chacha20 - implement NEON version based on SSE3 code
This is a straight port to ARM/NEON of the x86 SSE3 implementation
of the ChaCha20 stream cipher. It uses the new skcipher walksize
attribute to process the input in strides of 4x the block size.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-01-13 00:26:48 +08:00
Herbert Xu
5386e5d1f8 Revert "crypto: arm64/ARM: NEON accelerated ChaCha20"
This patch reverts the following commits:

8621caa0d4
8096667273

I should not have applied them because they had already been
obsoleted by a subsequent patch series.  They also cause a build
failure because of the subsequent commit 9ae433bc79.

Fixes: 9ae433bc79 ("crypto: chacha20 - convert generic and...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-28 17:39:26 +08:00
Ard Biesheuvel
8096667273 crypto: arm/chacha20 - implement NEON version based on SSE3 code
This is a straight port to ARM/NEON of the x86 SSE3 implementation
of the ChaCha20 stream cipher.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-12-27 17:47:29 +08:00