IEEE754_SPCVAL_NMIN denotes the index into the special value array where
the closest to zero negative normal number expressible is stored.
Similarly IEEE754_SPCVAL_NMIND denotes such index for the closest to
zero negative subnormal number expressible. Make comments match that.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9670/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reindent CP0 Cause macros for a single space after #define, leaving
extra indentation for individual Interrupt Pending bits as with CP0
Status register's Interrupt Mask bits.
[ralf@linux-mips.org: Fix conflict.]
[ralf@linux-mips.org: Fix indentation of the CAUSEB_FDCI and CAUSEF_FDCI
definitions.]
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9669/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
TX39 CP0 Configuration Register 3 macro definitions have been randomly
thrown in the middle of a block of CP0 Status register value macros.
Move them to the end of the whole CP0 register value macro block,
complementing the location of the TX39 Cache register name macro at the
end of the CP0 register name macro block.
[ralf@linux-mips.org: Fix conflict.]
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9668/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Originally CP1 macros were placed between CP0 register name macros and
CP0 register value macros. As changes were applied to the header the
position of CP1 macros gradually has become more and more arbitrary and
two separate blocks were created. This may only cause confusion.
Move them out of the way then and place together after all the CP0
macros. No semantic change.
[ralf@linux-mips.org: Fix conflict.]
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9667/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Remove a duplicate FPU Status Register reference that has been there
since forever and a mistakenly copied and pasted R4xx0 manual reference.
[ralf@linux-mips.org: Fix conflict.]
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9666/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
So let's remove everythig that only make sense for a kernel module and
build the thing unconditionally.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This simplifies code a lot by dropping many per-revision-group
functions. There are still some paths left that use uncommon NVRAM read
helpers or fill arrays. They will need to be handled in separated patch.
I've tested this (by printing SPROM content) for regressions on:
1) BCM4704 (SPROM revision 2)
2) BCM4706 (SPROM revision 8 plus 11 & 9 on extra WiFi cards)
The only difference is not reading board_type from SPROM rev 11 which is
unsupported and treated as rev 1. This change for rev 1 is expected.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/9660/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Handling many SPROM revisions became messy, we have tons of functions
specific to various revision groups which are quite hard to track.
For years there is yet another revision 11 asking for support, but
adding it in current the form would make things even worse.
To resolve this problem let's add new function with table-like entries
that will contain revision bitmask for every SPROM variable.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/9659/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
!CONFIG_DEBUG_ZBOOT doesn't need puts() and puthex(), remove them and
the corrospindig strings for !CONFIG_DEBUG_ZBOOT, as a result, it saves
about 1280 bytes.
[ralf@linux-mips.org: Resolved reject.]
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Wu Zhangjin <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/1898/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Remove the function proc_dolasatint() that is not used anywhere.
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8868/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When dealing with whole flash content (bcm47xx_nvram_init_from_mem) we
need to find NVRAM start trying various partition sizes (nvram_sizes).
This is not needed when using MTD as we have direct partition access.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/9652/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
For years Broadcom devices use 64 KiB NVRAM partition size and some of
them indeed have it filled in more than 50%. This change allows reading
whole NVRAM e.g. on Netgear WNDR4500 and Netgear R8000.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Patchwork: https://patchwork.linux-mips.org/patch/9651/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix the 74K D-cache alias erratum workaround so that it actually works.
Our current code sets MIPS_CACHE_VTAG for the D-cache, but that flag
only has any effect for the I-cache. Additionally MIPS_CACHE_PINDEX is
set for the D-cache if CP0.Config7.AR is also set for an affected
processor, leading to confusing information in the bootstrap log (the
flag isn't used beyond that).
So delete the setting of MIPS_CACHE_VTAG and rely on MIPS_CACHE_ALIASES,
set in a common place, removing I-cache coherency issues seen in GDB
testing with software breakpoints, gdbserver and ptrace(2), on affected
systems.
While at it add a little piece of explanation of what CP0.Config6.SYND
is so that people do not have to chase documentation.
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8507/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This add south-bridge (SB700/SB710/SB800 chipset) ACPI platform driver
for Loongson-3. This will be used by EC (Embedded Controller, used by
laptops) driver and STR (Suspend To RAM).
[ralf@linux-mips.org: Fix build error if !CONFIG_CPU_LOONGSON3. Build
doesn't like it if no obj-* variable is defined at all in a Makefile.
Obviously this has not been tested on other platforms.]
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/9619/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
On SGI Origin 2k/Onyx2 and SGI Octane systems, there can exist multiple PCI
buses attached to the Xtalk bus. The current code will stop counting PCI buses
after it finds the first one. If one installs the optional PCI cardcage
("shoebox") into these systems, because of the order of the Xtalk widgets, the
current PCI code will find the cardcage first, and fail to detect the BaseIO
PCI devices, which are on a higher Xtalk widget ID.
This patch adds the hooks needed for resolving this issue in the IP27 PCI code
(in a later patch).
Verified on both an SGI Onyx2 and an SGI Octane.
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Cc: Linux MIPS List <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/9074/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The octeon crypto co-processor expects values to be big endian.
Wrap the data transfers with cpu_to_be64() and be64_to_cpu()
transformations.
This passes for all the MD5 test vectors in crypto/testmgr.h
Signed-off-by: Paul Martin <paul.martin@codethink.co.uk>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9631/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
64 bit access is unaffected but for 32 bit access, swap high and
low words. Similarly for 16 bit access, reverse the order of the
four possible words, and for 8 bit access reverse the order of byte
accesses.
Signed-off-by: Paul Martin <paul.martin@codethink.co.uk>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9630/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Although the proper way to do this for bitfields would be to use
the macro that Ralf has provided, this is a little easier to
understand as a diff.
Signed-off-by: Paul Martin <paul.martin@codethink.co.uk>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9628/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This allows the kernel to correctly detect an R16000 MIPS CPU on systems that
have those. Otherwise, such systems will detect the CPU as an R14000, due to
similarities in the CPU PRId value.
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Cc: Linux MIPS List <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/9092/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Computing sum introduces true data dependency. This patch removes some
true data depdendencies, hence increases instruction level parallelism.
This patch brings up to 50% csum performance gain on Loongson 3a.
One example about how this patch works is in CSUM_BIGCHUNK1:
// ** original ** vs ** patch applied **
ADDC(sum, t0) ADDC(t0, t1)
ADDC(sum, t1) ADDC(t2, t3)
ADDC(sum, t2) ADDC(sum, t0)
ADDC(sum, t3) ADDC(sum, t2)
In the original implementation, each ADDC(sum, ...) depends on the sum
value updated by previous ADDC(as source operand).
With this patch applied, the first two ADDC operations are independent,
hence can be executed simultaneously if possible.
Another example is in the "copy and sum calculating chunk":
// ** original ** vs ** patch applied **
STORE(t0, UNIT(0) ... STORE(t0, UNIT(0) ...
ADDC(sum, t0) ADDC(t0, t1)
STORE(t1, UNIT(1) ... STORE(t1, UNIT(1) ...
ADDC(sum, t1) ADDC(sum, t0)
STORE(t2, UNIT(2) ... STORE(t2, UNIT(2) ...
ADDC(sum, t2) ADDC(t2, t3)
STORE(t3, UNIT(3) ... STORE(t3, UNIT(3) ...
ADDC(sum, t3) ADDC(sum, t2)
With this patch applied, ADDC and the **next next** ADDC are independent.
Signed-off-by: chenj <chenj@lemote.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9608/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
DSR-1000N board has two GPIO LEDs next to USB ports. Add support for them.
[ralf@linux-mips.org: Resolved conflict due to the moving of the DTS files
into vendor subdirectories.]
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9624/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This patch has no functional changes, it just to keep the assembler
code to a minimum. Files and functions naming is borrowed from X86.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/9616/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
We found that TLB mismatch not only happens after kernel resume, but
also happens during snapshot restore. So move it to the beginning of
swsusp_arch_suspend().
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: <stable@vger.kernel.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9621/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
With no I2C driver available, keeping the platform device registration
makes no sense just as keeping the code to instantiage the I2C devices.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Since we are always sourcing arch/mips/bmips/Kconfig and there is no
dependency on BMIPS_GENERIC, we will offer building BMIPS-related DTBs
while this is not relevant for the other MIPS platforms.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: jaedon.shin@gmail.com
Patchwork: https://patchwork.linux-mips.org/patch/9603/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
BMIPS 3300/435x/438x CPUs have a readahead cache that is separate from
the L1/L2. During a DMA operation, accesses adjacent to a DMA buffer
may cause parts of the DMA buffer to be prefetched into the RAC. To
avoid possible coherency problems, flush the RAC upon DMA completion.
Derived from Kevin Cernekee's https://patchwork.linux-mips.org/patch/9602/.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
