This patch describes Stingray SOC clock tree using
DT nodes in Stingray DTS.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The Broadcom Stingray SoC is a new member in Broadcom iProc
SoC family.
This patch adds initial DTS files for Broadcom Stingray SoC
and two of its reference boards (bcm958742k and bcm958742t).
We have lot of reference boards and large number of devices
in Broadcom Stingray SoC so eventually we will have quite
a few DTS files for Stingray. To tackle, we have added a
separate directory for Stingray DTS files.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Compiling the DT file with W=1, DTC warns like follows:
Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a
unit name, but no reg property
Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
ls1012a has separate input root clocks for core PLLs versus the platform
PLL, with the latter described as sysclk in the hw docs.
Accordingly, update the clock-frequency in sysclk to 125M as platform
input clock.
Signed-off-by: Scott Wood <oss@buserror.net>
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add "dis_rxdet_inp3_quirk" boolean property to USB3 node. This property
is used to disable rx detection in P3 PHY mode.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Currently SD UHS-I modes were enabled by default on LS208xARDB boards,
but the new LS2088ARDB RevF board didn't support them any more since SDHC
circuit had been reworked. This patch is to disable SD UHS-I modes by default
in case of any issue on LS2088ARDB RevF
Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
Acked-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The AR100 clock within the R_CCU (PRCM) has the PLL_PERIPH0 as one of
its parents.
This adds the reference in the device tree describing this relationship.
This patch uses a raw number for the clock index to ease merging by
avoiding cross tree dependencies.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This adds an initial DT for the RTD1295 SoC and a TV box based on it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=vjlA
-----END PGP SIGNATURE-----
Merge tag 'realtek-arm64-dt-for-4.12' of git://github.com/afaerber/linux into next/dt64
Realtek ARM64 based SoC DT for v4.12
This adds an initial DT for the RTD1295 SoC and a TV box based on it.
* tag 'realtek-arm64-dt-for-4.12' of git://github.com/afaerber/linux:
ARM64: dts: Add Realtek RTD1295 and Zidoo X9S
dt-bindings: arm: Add Realtek RTD1295 bindings
dt-bindings: Add vendor prefix for Zidoo
Signed-off-by: Olof Johansson <olof@lixom.net>
* Add support for R-Car H3 ES2.0
* Break out common board support
* Set drive-strength for ravb pins for r8a7795/h3ulcb and r8a7796/m3ulcb
* Enable HDMI outputs on r8a7795/salvator-x
* Add R-Car audio to DT of r8a7796 SoC
* Add current sense amplifiers to DT of r8a779[56]/salvator-x
* Enable NFS-root on r8a7796/salvator-x
* Enable HS200 for eMMC on r8a779[56]/salvator-x,
r8a7795/h3ulcb and r8a7796/m3ulcb
* Enable EthernetAVB, I2C r8a7796/m3ulcb
* Update memory node to 2 GiB map on r8a7796/m3ulcb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=cmye
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-dt-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64
Renesas ARM64 Based SoC DT Updates for v4.13
* Add support for R-Car H3 ES2.0
* Break out common board support
* Set drive-strength for ravb pins for r8a7795/h3ulcb and r8a7796/m3ulcb
* Enable HDMI outputs on r8a7795/salvator-x
* Add R-Car audio to DT of r8a7796 SoC
* Add current sense amplifiers to DT of r8a779[56]/salvator-x
* Enable NFS-root on r8a7796/salvator-x
* Enable HS200 for eMMC on r8a779[56]/salvator-x,
r8a7795/h3ulcb and r8a7796/m3ulcb
* Enable EthernetAVB, I2C r8a7796/m3ulcb
* Update memory node to 2 GiB map on r8a7796/m3ulcb
* tag 'renesas-arm64-dt-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (35 commits)
arm64: dts: r8a7795: salvator-x: Add support for R-Car H3 ES2.0
arm64: dts: r8a7795: Add support for R-Car H3 ES2.0
arm64: dts: ulcb: Set drive-strength for ravb pins
arm64: dts: renesas: r8a7795-salvator-x: Enable HDMI outputs
arm64: dts: renesas: r8a7795-salvator-x: Add DU external dot clocks
arm64: dts: renesas: salvator-x: Add HDMI output connectors
arm64: dts: renesas: salvator-x: Add DU external dot clock sources
arm64: dts: renesas: r8a7795: Add HDMI encoder support
arm64: dts: salvator-x: Add panel backlight support
arm64: dts: r8a7796: Add PWM device nodes
arm64: dts: r8a7796: add Sound MIX support
arm64: dts: r8a7796: add Sound CTU support
arm64: dts: r8a7796: add Sound DVC support
arm64: dts: r8a7796: add Sound SRC support
arm64: dts: r8a7796: add Sound SSI DMA support
arm64: dts: r8a7796: add Sound SSI PIO support
arm64: dts: r8a7796: add AUDIO_DMAC support
arm64: dts: salvator-x: Add current sense amplifiers
arm64: dts: renesas: Extract common ULCB board support
arm64: dts: renesas: Extract common Salvator-X board support
...
Signed-off-by: Olof Johansson <olof@lixom.net>
The dwmac-sun8i hardware is present on the BananaPi M64.
It uses an external PHY rtl8211e via RGMII.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dwmac-sun8i hardware is present on the pine64 plus.
It uses an external PHY rtl8211e via RGMII.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dwmac-sun8i hardware is present on the pine64
It uses an external PHY via RMII.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dwmac-sun8i is an Ethernet MAC that supports 10/100/1000 Mbit
connections. It is very similar to the device found in the Allwinner
H3, but lacks the internal 100 Mbit PHY and its associated control
bits.
This adds the necessary bits to the Allwinner A64 SoC .dtsi, but keeps
it disabled at this level.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch add the dt node for the syscon register present on the
Allwinner A64.
Only two register are present in this syscon and the only one useful is
the one dedicated to EMAC clock.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the SPICC Controller pins nodes for Amlogic GXL SoCs.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This patch adds the SPICC Controller pins nodes for Amlogic GXBB SoCs.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The Amlogic Meson GXL SoCs embeds an 10/100 Ethernet PHY, this patchs adds
the Link and Activity LEDs signals pins nodes.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the AO and EE domain CEC pins nodes for the Amlogic Meson GXL SoCs.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the AO and EE domain CEC pins nodes for the Amlogic Meson GXBB SoCs.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The pull-enable register base was wrongly copied from the meson8b pinctrl node,
but was not used yet.
Fixes: c328666d58 ("ARM64: dts: amlogic: Add Meson GX dtsi from GXBB")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The pull-enable register base was wrongly copied from the GXBB pinctrl node,
but was not used yet.
Fixes: fb0fe92294 ("ARM64: dts: meson-gxl: Add pinctrl nodes")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The gpio-range was badly added on the GXL dtsi, the AO pin count is 10
instead of 14.
Fixes: 84412e4e85 ("ARM64: dts: meson-gxl: Add gpio-ranges properties")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The FriendlyARM NanoPi K2 is a single-board computer.
Cc: techsupport@friendlyarm.com
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The R-Box Pro is a TV box derived from Amlogic q200 reference design.
It uses an AP6255 Wifi module. It features an LED tube that lights a
surrounding stripe and the top logo in blue or red or pink'ish - blue
is on by default, and red (i.e., pink) is configured as panic indicator.
This device is available in at least two models, with 2 GB vs. 3 GB RAM
as well as varying eMMC size. The intent is to handle this with a single
.dts that gets the actual RAM size from U-Boot.
Cc: ada@kingnoval.com
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The rk3399 has multiple variants with different frequency ratings.
The operating points currently in the kernel stem from the op1 variant
used in Gru ChromeOS devices and may not be suitable for general rk3399
chips. Therefore bring it back to the official general operating points.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The OP1 is a rk3399 variant used in ChromeOS devices with a slightly
higher frequency rating compared to the regular rk3399, but right now
the only available operating points don't match either variant
with both needing adjustments to actually fit their specs.
Therefore introduce separate operting points, from the ChromeOS kernel,
for the OP1 and use it on Gru devices.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The power-tree on the rk3399-firefly did not completely match the
documentation and vendor devicetree. It was also missing some
supply-hirarchy information and some regulator-gpio names did not
match the schematics. Fix this for the existing regulators before
introducing new things.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
We currently have three device nodes for the same USB hardware
block, as evident by the reuse of the same reg address multiple
times. Now that the chipidea driver fully supports OTG with the
MSM wrapper we can collapse all these nodes into one USB device
node, reflecting the true nature of the hardware.
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add initial device trees for the RTD1295 SoC and the Zidoo X9S TV box.
The CPUs lack the enable-method property because the vendor device tree
uses a custom "rtk-spin-table" method and "psci" did not appear to work.
The UARTs lack the interrupts properties because the vendor device tree
connects them to a custom interrupt controller. earlycon works without.
A list of memory reservations is adopted from v1.2.11 vendor device tree:
0x02200000 can be used for an initrd, 0x01b00000 is audio-related;
ion-related 0x02600000, 0x02c00000 and 0x11000000 are left out;
0x10000000 is used for sharing the U-Boot environment; others remain
to be investigated.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.
But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.
So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The cryptographic engine nodes have an interrupt which is configured as
both edge and level, which makes no sense at all. Fix this by
configuring it the right way (level).
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The description of the connection between the dwmmc (SDIO) controller and
the Wifi chip, which is attached to the SDIO bus is wrong. Currently the
SDIO card can't be detected and thus the Wifi doesn't work.
Let's fix this by assigning the correct vmmc supply, which is the always on
regulator VDD_3V3 and remove the WLAN enable regulator altogether. Then to
properly deal with the power on/off sequence, add a mmc-pwrseq node to
describe the resources needed to detect the SDIO card.
Except for the WLAN enable GPIO and its corresponding assert/de-assert
delays, the mmc-pwrseq node also contains a handle to a clock provided by
the hi655x pmic. This clock is also needed to be able to turn on the WiFi
chip.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Move the board specific descriptions for the dwmmc nodes in the hi6220 SoC
dtsi, into the hikey dts as it's there these belongs.
While changing this, let's take the opportunity to drop the use of the
"ti,non-removable" binding for one of the dwmmc device nodes, as it's not a
valid binding and not used. Drop also the unnecessary use of "num-slots =
<0x1>" for all of the dwmmc nodes, as there is no need to set this since
when default number of slots is one.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Add these regulators to better describe the HW, but also because those is
needed in following changes.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The regulator is a part of the hikey board, therefore let's move it from
the hi6220 SoC dtsi file into the hikey dts file . Let's also rename the
regulator according to the datasheet (5V_HUB) to better reflect the HW.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The hi655x PMIC provides the regulators but also a clock. The latter is
missing so let's add it. This clock is used by WiFi/Bluetooth chip, but
that connection is done in a separate change on top of this one.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
[Ulf: Split patch and updated changelog]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Make full use of 32 regions and increase IORESOURCE_MEM_64
so that we could have more chance to support PCIe switch with
more endpoints attached to our RC.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
In order to support multiple hierarchy of PCIe buses,
for instance, PCIe switch, we need to extent bus-ranges
to as max as possible. We have 32 regions and could support
up to 31 buses except bus 0 for our root bridge.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add qos setting reg for some peripheral like sd, usb, pcie.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Split off support for Salvator-X boards with the ES1.x revision of the
R-Car H3 SoC into a separate file. The main r8a7795-salvator-x.dts file
now corresponds to Salvator-X with R-Car H3 ES2.0 or later.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Update r8a7795.dtsi so it corresponds to R-Car H3 ES2.0 or later:
- The following devices no longer exist on ES2.0, and are thus removed:
fcpf2, fcpvd3, fcpvi2, fdp1-2, usb3-if1, vspd3, vspi2.
- The DU <-> VSPD topology is different on ES2.0, hence remove the
"compatible" and "vsps" properties from the DU node until the driver
can handle this.
Move support for the ES1.x revision of the R-Car H3 SoC into a
separate file. To avoid duplication, r8a7795-es1.dtsi includes
r8a7795.dtsi, and adds device nodes and properties where needed.
Note that while currently r8a7795-es1.dtsi only adds device nodes,
removal of devices nodes and properties can be implemented using the
/delete-node/ and /delete-property/ keywords, as shown below:
&soc {
/delete-node/ <name>@<addr>;
};
&<label> {
/delete-property/ <prop>;
};
Switch r8a7795-salvator-x.dts and r8a7795-h3ulcb.dts from r8a7795.dtsi
to r8a7795-es1.dtsi to preserve compatibility.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The EthernetAVB should not depend on the bootloader to setup correct
drive-strength values. Values for drive-strength where found by
examining the registers after the bootloader has configured the
registers and successfully used the EthernetAVB.
Based on:
* commit 7d73a4da26 ("arm64: dts: r8a7795: salvator-x: Set drive-strength
for ravb pins")
* commit 4903987033be ("arm64: dts: r8a7796: salvator-x: Set drive-strength
for ravb pins")
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable the HDMI encoders for the H3 Salvator-X board. The number of
encoders varies between the H3 and M3-W SoCs, so they can't be enabled
in the common salvator-x.dtsi file.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The DU1 and DU2 external dot clocks are provided by the fixed frequency
clock generators X21 and X22, while the DU0 and DU3 clocks are provided
by the programmable Versaclock5 clock generator.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The Salvator-X board has two HDMI output connectors. Add them to the
common salvator-x.dtsi.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The DU1 and DU2 external dot clocks are fixed frequency clock generators
running at 33MHz, while the DU0 and DU3 external dot clocks are
generated by an I2C-controlled programmable clock generator.
All those clock generators are available on both the H3 and M3-W
Salvator-X boards. Add them to the salvator-x.dtsi file.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add DT nodes for the two HDMI encoders in disabled state.
Based on work by Koji Matsuoka.
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The panel backlight is controlled through a GPIO and a PWM channel.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[simon: apply to salvator-x.dtsi instead of r8a7795-salvator-x.dts]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The Renesas ULCB development board can be equipped with either an R-Car
H3 or M3-W SiP, which are pin-compatible. Both boards use different
DTBs.
Reduce duplication by extracting common ULCB board support into its own
.dtsi file. References to SoC-specific clocks are handled through cpp
definitions. Sort device nodes while at it.
For H3ULCB, there are no functional changes.
For M3ULCB, the following new devices are now described in DT:
- External audio, CAN, and PCIe clocks,
- CS2000 clock generator,
- AK4613 Audio Codec.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The Renesas Salvator-X development board can be equipped with either an
R-Car H3 or M3-W SiP, which are pin-compatible. Both boards use
different DTBs.
Reduce duplication by extracting common Salvator-X board support into
its own .dtsi file. References to SoC-specific clocks are handled
through cpp definitions. Sort device nodes while at it.
For boards with an R-Car H3 SiP, there are no functional changes.
For boards with an R-Car M3-W SiP, the following new devices are now
described in DT:
- External audio, CAN, and PCIe clocks,
- USB Vbus regulator,
- CS2000 clock generator,
- AK4613 Audio Codec,
- VGA.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add empty device nodes serving as placeholders for devices that are not
yet supported and/or tested on R-Car M3-W, but are supported and used on
Salvator-X or H3ULCB boards equipped with an R-Car H3 SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the external PCIe bus clock as a zero Hz fixed-frequency clock.
Boards that provide this clock should override it.
Based on r8a7795.dtsi.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the external audio clocks as zero Hz fixed-frequency clocks.
Boards that provide these clocks should override them.
Based on commit 623197b90c ("arm64: renesas: r8a7795: Sound SSI
PIO support").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The device trees for Renesas SoCs use either pfc or pin-controller as the
node name for the PFC device. This patch is intended to take a step towards
unifying the node name used as pin-controller which appears to be the more
generic of the two and thus more in keeping with the DT specs.
My analysis is that this is a user-visible change to the extent that kernel
logs, and sysfs entries change from e6060000.pfc and pfc@e6060000 to
e6060000.pin-controller and pin-controller@e6060000.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
The EthernetAVB should not depend on the bootloader to setup correct
drive-strength values. Values for drive-strength where found by
examining the registers after the bootloader has configured the
registers and successfully used the EthernetAVB.
Based on commit 7d73a4da26 ("arm64: dts: r8a7795: salvator-x: Set
drive-strength for ravb pins").
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Set PHY rxc-skew-ps to 1500 and all other values to their default values.
This is intended to to address failures in the case of 1Gbps communication
using the salvator-x board with the KSZ9031RNX phy. This has been
reported to occur with both the r8a7795 (H3) and r8a7796 (M3-W) SoCs.
Based in a similar patch for the r8a7796 salvator-x by Kazuya Mizuguchi.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This supports HS200 mode for eMMC on H3ULCB board
Signed-off-by: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This supports HS200 mode for eMMC on M3ULCB board
Signed-off-by: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch updates memory region:
- After changes, the new map of the m3ulcb board on R8A7796 SoC
Bank0: 1GiB RAM : 0x000048000000 -> 0x0007fffffff
Bank1: 1GiB RAM : 0x000600000000 -> 0x0063fffffff
- Before changes, the old map looked like this:
Bank0: 1GiB RAM : 0x000048000000 -> 0x0007fffffff
Signed-off-by: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com>
Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This supports I2C2 bus on M3ULCB board
Signed-off-by: Vladimir Barinov <vladimir.barinov+renesas@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the DPAA 1.x FMan nodes for the ARM based platforms.
Using separate files for each port as not all ports are used on all
devices. Different numbering of ports is also possible on different
devices.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The arm64 H5 and arm H3 SoCs share roughly the same base, and therefore
share a significant part of their device tree.
The approach we took was to add a symlink from the arm64 DTSI to the arm
DTSI.
Now that the arm DT folder is exposed in the include path, we can just use
it and remove our symlink.
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The IOMMU-backed DMA API support has now been in place for a while and
proven stable, so there's no real need to keep most of Juno's SMMUs
disabled. The USB, HDLCDs, and CoreSight ETR all just need to map RAM
buffers for DMA - enabling their SMMUs obviates CPU bounce buffering for
USB's streaming DMA to the upper memory bank, and lets the other two
allocate their relatively large coherent buffers without pressuring CMA.
Some more software work is still needed for the DMA-330 and PCIe before
those can accommodate SMMU translation correctly in all cases, so we
leave those alone for now.
Tested-by: Liviu Dudau <Liviu.Dudau@arm.com> [only HDLCD]
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add Coresight CPU debug nodes for Juno r0, r1 & r2. The CPU
debug areas are mapped at the same address for all revisions,
like the ETM, even though the CPUs have changed from r1 to r2.
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mathieu Poirier <mathieu.porier@linaro.org>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[arranged nodes in ascending order with respect to register addresses]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The way we handle include paths for DT has changed a bit, which
broke a file that had an unconventional way to reference a common
header file:
arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts:47:10: fatal error: include/dt-bindings/input/linux-event-codes.h: No such file or directory
This removes the leading "include/" from the path name, which fixes it.
Fixes: d5d332d3f7 ("devicetree: Move include prefixes from arch to separate directory")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We use a directory under arch/$ARCH/boot/dts as an include path
that has links outside of the subtree to find dt-bindings from under
include/dt-bindings. That's been working well, but new DT architectures
haven't been adding them by default.
Recently there's been a desire to share some of the DT material between
arm and arm64, which originally caused developers to create symlinks or
relative includes between the subtrees. This isn't ideal -- it breaks
if the DT files aren't stored in the exact same hierarchy as the kernel
tree, and generally it's just icky.
As a somewhat cleaner solution we decided to add a $ARCH/ prefix link
once, and allow DTS files to reference dtsi (and dts) files in other
architectures that way.
Original approach was to create these links under each architecture,
but it lead to the problem of recursive symlinks.
As a remedy, move the include link directories out of the architecture
trees into a common location. At the same time, they can now share one
directory and one dt-bindings/ link as well.
Fixes: 4027494ae6 ('ARM: dts: add arm/arm64 include symlinks')
Reported-by: Russell King <linux@armlinux.org.uk>
Reported-by: Omar Sandoval <osandov@osandov.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: linux-arch <linux-arch@vger.kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Makes the override safer.
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Product pictures show no DB9 connector, so this seems copy&paste.
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
bcrmf -> brcmf -> wifi
Fixes: e15d2774b8 ("ARM64: dts: meson-gxl: add support for the Khadas VIM board")
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
bcrmf -> brcmf -> wifi
Fixes: bb51b5350d ("ARM64: dts: Add support for Meson GXM")
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Sort the .dtb files alphabetically to make clear where to add new ones.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the DPAA 1.x QMan and BMan nodes in the LS1043A device tree.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
For the raspberry pi 3 we'll need both sdhci (handles sdio wifi) and
sdhost (handles sdcard).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Eric Anholt <eric@anholt.net>
The decon uses HW-TRIGGER, so TE interrupt is not necessary.
Therefore, remove the te-gpios property in the TM2 dts.
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This adds basic chip support for MT6797 SoC.
Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
there is a reference clock for each port, HighSpeed port is 48M,
and SuperSpeed port is usually 26M. it is flexible to move it
into port node, then unused clock can be disabled.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
split the old SuperSpeed port node into a HighSpeed one and a new
SuperSpeed one.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
1. Sata ecc should be disabled due to a erratum.
Provide the ecc register address for driver to use.
2. Enable dma coherence operation
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
LS1088AQDS consist of NOR, NAND and FPGA connected over IFC
LS1088ARDB consist of NAND and FPGA connected over IFC.
So add flash information in ifc node of device tree.
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add esdhc node for ls1088a and enable it on both RDB and QDS boards.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There are two eSDHC controllers in LS1012A. This patch is to add
eSDHC nodes for ls1012a dts. Also enable eSDHC for RDB/QDS boards.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This patch is to enable SD UHS-I mode on LS208xRDB and eMMC HS200
mode on LS208xQDS in dts. Also, the eSDHC peripheral clock must be
used instead of platform clock to support these modes.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This patch is to enable SD UHS-I mode and eMMC HS200 mode on
LS1046ARDB in dts. Also, the eSDHC peripheral clock must be used
instead of platform clock to support these modes.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Integrated flash controller present in LS1043A and LS1046A is big endian.
So add big endian property in the devive tree.
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
As we have USB0 controller switch available on A64, we should now enable
the EHCI0/OHCI0 controllers for Pine64.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Allwinner A64 SoC features a pair of EHCI/OHCI controllers that can be
set to wire to USB0 port (the OTG-capable one), which can be used to
provide a better performance in host mode.
Add their device tree nodes.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Adjust the PHY parameters for more stable access to the eMMC device.
Set the SDCLK output delay value to 21 (including HS200/400 modes).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since commit a89c472d8b ("mmc: sdhci-cadence: Update PHY delay
configuration"), PHY parameters must be specified by DT.
The hard-coded settings have been converted as follows:
- SDHCI_CDNS_PHY_DLY_SD_DEFAULT -> cdns,phy-input-delay-legacy
- SDHCI_CDNS_PHY_DLY_EMMC_SDR -> cdns,phy-input-delay-mmc-highspeed
- SDHCI_CDNS_PHY_DLY_EMMC_DDR -> cdns,phy-input-delay-mmc-ddr
The following have not been moved:
- SDHCI_CDNS_PHY_DLY_SD_HS
this is unneeded in the eMMC configuration
- SDHCI_CDNS_PHY_DLY_EMMC_LEGACY
this is never enabled by the driver as it is covered by
SDHCI_CDNS_PHY_DLY_SD_DEFAULT
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Firefly-rk3399 is a bord from T-Firefly, you can find detail about
it here:
http://en.t-firefly.com/en/firenow/Firefly_RK3399/
This patch add basic node for the board and make it able to bring
up.
Peripheral works:
- usb hub which connect to ehci controller;
- UART2 debug
- eMMC
- PCIe
Not work:
- USB 3.0 HOST, type-C port
- sdio, sd-card
Not test for other peripheral:
- HDMI
- Ethernet
- OPTICAL
- WiFi/BT
- MIPI CSI/DSI
- IR
- EDP/DP
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This is a dependency for the following fix
* tee/initial-merge:
arm64: dt: hikey: Add optee node
Documentation: tee subsystem and op-tee driver
tee: add OP-TEE driver
tee: generic TEE subsystem
dt/bindings: add bindings for optee
This branch introduces a generic TEE framework in the kernel, to handle
trusted environemtns (security coprocessor or software implementations
such as OP-TEE/TrustZone). I'm sending it separately from the other
arm-soc driver changes to give it a little more visibility, once
the subsystem is merged, we will likely keep this in the arm₋soc
drivers branch or have the maintainers submit pull requests directly,
depending on the patch volume.
I have reviewed earlier versions in the past, and have reviewed
the latest version in person during Linaro Connect BUD17.
Here is my overall assessment of the subsystem:
* There is clearly demand for this, both for the generic
infrastructure and the specific OP-TEE implementation.
* The code has gone through a large number of reviews,
and the review comments have all been addressed, but
the reviews were not coming up with serious issues any more
and nobody volunteered to vouch for the quality.
* The user space ioctl interface is sufficient to work with the
OP-TEE driver, and it should in principle work with other
TEE implementations that follow the GlobalPlatform[1] standards,
but it might need to be extended in minor ways depending on
specific requirements of future TEE implementations
* The main downside of the API to me is how the user space
is tied to the TEE implementation in hardware or firmware,
but uses a generic way to communicate with it. This seems
to be an inherent problem with what it is trying to do,
and I could not come up with any better solution than what
is implemented here.
For a detailed history of the patch series, see
https://lkml.org/lkml/2017/3/10/1277
Conflicts: needs a fixup after the drm tree was merged, see
https://patchwork.kernel.org/patch/9691679/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=VzpB
-----END PGP SIGNATURE-----
Merge tag 'armsoc-tee' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull TEE driver infrastructure and OP-TEE drivers from Arnd Bergmann:
"This introduces a generic TEE framework in the kernel, to handle
trusted environemtns (security coprocessor or software implementations
such as OP-TEE/TrustZone). I'm sending it separately from the other
arm-soc driver changes to give it a little more visibility, once the
subsystem is merged, we will likely keep this in the arm₋soc drivers
branch or have the maintainers submit pull requests directly,
depending on the patch volume.
I have reviewed earlier versions in the past, and have reviewed the
latest version in person during Linaro Connect BUD17.
Here is my overall assessment of the subsystem:
- There is clearly demand for this, both for the generic
infrastructure and the specific OP-TEE implementation.
- The code has gone through a large number of reviews, and the review
comments have all been addressed, but the reviews were not coming
up with serious issues any more and nobody volunteered to vouch for
the quality.
- The user space ioctl interface is sufficient to work with the
OP-TEE driver, and it should in principle work with other TEE
implementations that follow the GlobalPlatform[1] standards, but it
might need to be extended in minor ways depending on specific
requirements of future TEE implementations
- The main downside of the API to me is how the user space is tied to
the TEE implementation in hardware or firmware, but uses a generic
way to communicate with it. This seems to be an inherent problem
with what it is trying to do, and I could not come up with any
better solution than what is implemented here.
For a detailed history of the patch series, see
https://lkml.org/lkml/2017/3/10/1277"
* tag 'armsoc-tee' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: dt: hikey: Add optee node
Documentation: tee subsystem and op-tee driver
tee: add OP-TEE driver
tee: generic TEE subsystem
dt/bindings: add bindings for optee
pinctrl and GPIO description for Armada 37xx SoCs
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWQNYziMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71cGmAJ4yR6i1f8EZ
25RXPzm/6ubxAYiRMgCfWVjipw6KD0s2muMylnk8ppz4PaM=
=NOR2
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.12-3' of git://git.infradead.org/linux-mvebu into fixes
Pull "mvebu dt64 for 4.12 (part 3)" from Gregory CLEMENT:
pinctrl and GPIO description for Armada 37xx SoCs
* tag 'mvebu-dt64-4.12-3' of git://git.infradead.org/linux-mvebu:
ARM64: dts: marvell: armada37xx: add pinctrl definition
ARM64: dts: marvell: Add pinctrl nodes for Armada 3700
- mt8173: fix mmc parameters
- set timer frequency explicitly and force the driver to set it
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABAgAGBQJZEfOYAAoJELQ5Ylss8dNDizsP/2/tAoJ66wxdiO3Jd4Wgq+Kb
eFwwre2WxcBjuJyzzIxIgnDib0TKgKSjo5qcakSjmp4RNg18Mt1DRP+ty6eJ5Yh8
2c+xtj31lcfCrpi1N6hKqqoW8yYfgrHuQxsrlS4wrUs9YcDcDk6dWAoJ5tUJepE+
TrgZ5zqUiseTW26ULFvUlXDg/qf1rBQPVMeOiV/fmGnyjPvTL5simmLnyR/DZjXO
gCccVvqDs1XnzBT0cYDovL+HeayQ7fLRrhpoPiyLFycr5ESSIDYvTnfuFd8Vz5qR
5bM5WVmOfXJ93n0qrWoN+ILQXir3a8Lk9j+9Nx4YuMS0V4CwHFkYZT3WFCFuN76p
RwHNI28LQug9d9EDKfX0TgqyHvlE+VLGjIv0lYlH5gEGp0qX2QAwU+g+nhhHiugB
GTNv6BwRtceMx7iILsEUnEShYwN5JZmFHeCQyjqGLhVT2Hb2kwudRzA157ObaZNV
NLb48+M4qRH9seOM/bp7iARDgS+L9mevJ7IF7OMCdogWDn0Cq+9MvclLR8c8u7Ml
M5Nuuto8v2yoXzT7LEp5o4Q8ZxzE4rPsXBsgDu5NQYr5lQFcWskvG3yZJyo5HRA4
OW1ERkRhOcKRQm9bYTVtZZ2au3TJM6P0UBgvY6hFwwRmgHX5MkDBULj8a/vmK2gc
0EvcriDgNEdOgoETO4+y
=yOfu
-----END PGP SIGNATURE-----
Merge tag 'v4.11-next-fixes' of https://github.com/mbgg/linux-mediatek into fixes
Pull "DTS fixes" from Matthias Brugger:
- mt8173: fix mmc parameters
- set timer frequency explicitly and force the driver to set it
* tag 'v4.11-next-fixes' of https://github.com/mbgg/linux-mediatek:
ARM64: dts: mediatek: configure some fixed mmc parameters
arm: dts: mt7623: add clock-frequency to the a7 timer node to mt7623.dtsi
Device-tree updates for arm64 platforms. Just as with 32-bit, a bunch of smaller
changes, but also some new platforms that are worth mentioning:
* Rockchip RK3399 platforms for Chromebooks, including Samsung Chromebook
Plus (Kevin)
* Orange Pi PC2 (Allwinner H5)
* Freescale LS2088A and LS1088A SoCs
* Expanded support for Nvidia Tegra186 (and Jetson TX2)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=q3Ix
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM 64-bit DT updates from Olof Johansson:
"Device-tree updates for arm64 platforms. Just as with 32-bit, a bunch
of smaller changes, but also some new platforms that are worth
mentioning:
- Rockchip RK3399 platforms for Chromebooks, including Samsung
Chromebook Plus (Kevin)
- Orange Pi PC2 (Allwinner H5)
- Freescale LS2088A and LS1088A SoCs
- Expanded support for Nvidia Tegra186 (and Jetson TX2)"
* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (180 commits)
arm64: dts: Add basic DT to support Spreadtrum's SP9860G
arm64: dts: exynos: Use - instead of @ for DT OPP entries
arm64: dts: exynos: Add support for s6e3hf2 panel device on TM2e board
arm64: dts: juno: add information about L1 and L2 caches
arm64: dts: juno: fix few unit address format warnings
arm64: marvell: dts: enable the crypto engine on the Armada 8040 DB
arm64: marvell: dts: enable the crypto engine on the Armada 7040 DB
arm64: marvell: dts: add crypto engine description for 7k/8k
arm64: dts: marvell: add sdhci support for Armada 7K/8K
arm64: dts: marvell: add eMMC support for Armada 37xx
arm64: dts: hisi: add pinctrl dtsi file for HiKey960 development board
arm64: dts: hisi: add drive strength levels of the pins for Hi3660 SoC
arm64: dts: hisi: enable the NIC and SAS for the hip07-d05 board
arm64: dts: hisi: add SAS nodes for the hip07 SoC
arm64: dts: hisi: add RoCE nodes for the hip07 SoC
arm64: dts: hisi: add network related nodes for the hip07 SoC
arm64: dts: hisi: add mbigen nodes for the hip07 SoC
arm64: dts: rockchip: fix the memory size of PX5 Evaluation board
arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board
dt-bindings: arm: hisilicon: add bindings for hi3798cv200 SoC and Poplar board
...
Device-tree continues to see lots of updates. The majority of patches
here are smaller changes for new hardware on existing platforms, and
there are a few larger changes worth pointing out.
Major new platforms:
- Gemini has been ported to DT, so a handful of "new" platforms moved over
from board files
- Rockchip RK3288 support for Tinkerboard and Phytec phyCORE-RK3288 SoM and RDK
- A bunch of embedded platforms, several Linksys platforms, Synology DS116,
- Motorola Droid4 (really old OMAP-based phone) support is added.
Some refactorings, i.e. Allwinner H3/H5 support is commonalized.
And lots of smaller changes, cleanups, etc. See shortlog for more description
We're adding ability to cross-include DT files between arm and arm64,
by creating appropriate links in the dt-include directory, and using arm/
and arm64/ as include prefixes. This will avoid other local hacks such as
per-file links between the two arch trees (this broke for external mirroring
of DT contents). Now they can just provide their own appropriate dt-include
hierarcy per platform.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=v6w6
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM Device-tree updates from Olof Johansson:
"Device-tree continues to see lots of updates. The majority of patches
here are smaller changes for new hardware on existing platforms, and
there are a few larger changes worth pointing out.
Major new platforms:
- Gemini has been ported to DT, so a handful of "new" platforms moved
over from board files
- Rockchip RK3288 support for Tinkerboard and Phytec phyCORE-RK3288
SoM and RDK
- A bunch of embedded platforms, several Linksys platforms, Synology
DS116,
- Motorola Droid4 (really old OMAP-based phone) support is added.
Some refactorings, i.e. Allwinner H3/H5 support is commonalized.
And lots of smaller changes, cleanups, etc. See shortlog for more
description
We're adding ability to cross-include DT files between arm and arm64,
by creating appropriate links in the dt-include directory, and using
arm/ and arm64/ as include prefixes. This will avoid other local hacks
such as per-file links between the two arch trees (this broke for
external mirroring of DT contents). Now they can just provide their
own appropriate dt-include hierarcy per platform"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (349 commits)
ARM: dts: exynos: Use - instead of @ for DT OPP entries
arm: spear6xx: add DT description of the ADC on SPEAr600
arm: spear6xx: remove unneeded pinctrl properties in spear600-evb
arm: spear6xx: switch spear600-evb to the new flash partition DT binding
arm: spear6xx: fix spaces in spear600-evb.dts
arm: spear6xx: use node labels in spear600-evb.dts
arm: spear6xx: add labels to various nodes in spear600.dtsi
ARM: dts: vexpress: fix few unit address format warnings
ARM: dts: at91: sama5d3_xplained: not all ADC channels are available
ARM: dts: at91: sama5d3_xplained: fix ADC vref
ARM: dts: at91: add envelope detector mux to the Axentia TSE-850
ARM: dts: armada-38x: label USB and SATA nodes
ARM: dts: imx6q-utilite-pro: add hpd gpio
ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply
ARM: dts: imx6qdl-sabresd: Set LDO regulator supply
ARM: dts: imx: add Gateworks Ventana GW5903 support
ARM: dts: i.MX25: add AIPS control registers
ARM: dts: imx7-colibri: add Carrier Board 3.3V/5V regulators
ARM: dts: imx7-colibri: remove 1.8V fixed regulator
ARM: dts: imx7-colibri: allow to disable Ethernet rail
...
Here is the big USB patchset for 4.12-rc1.
Lots of good stuff here, after many many many attempts, the kernel
finally has a working typeC interface, many thanks to the Heikki and
Guenter and others who have taken the time to get this merged. It
wasn't an easy path for them at all.
There's also a staging driver that uses this new api, which is why it's
coming in through this tree.
Along with that, there's the usual huge number of changes for gadget
drivers, xhci, and other stuff. Johan also finally refactored pretty
much every driver that was looking at USB endpoints to do it in a common
way, which will help prevent any "badly-formed" devices from causing
problems in drivers. That too wasn't a simple task.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWQvEIQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yny4gCePCXxnrQdMWE+IMXf1H1hMubLkVkAn0ZWgQkq
BspgO7ZmGb+9Fpf6YvNz
=nwAu
-----END PGP SIGNATURE-----
Merge tag 'usb-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB updates from Greg KH:
"Here is the big USB patchset for 4.12-rc1.
Lots of good stuff here, after many many many attempts, the kernel
finally has a working typeC interface, many thanks to Heikki and
Guenter and others who have taken the time to get this merged. It
wasn't an easy path for them at all.
There's also a staging driver that uses this new api, which is why
it's coming in through this tree.
Along with that, there's the usual huge number of changes for gadget
drivers, xhci, and other stuff. Johan also finally refactored pretty
much every driver that was looking at USB endpoints to do it in a
common way, which will help prevent any "badly-formed" devices from
causing problems in drivers. That too wasn't a simple task.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
staging: typec: Fairchild FUSB302 Type-c chip driver
staging: typec: Type-C Port Controller Interface driver (tcpci)
staging: typec: USB Type-C Port Manager (tcpm)
usb: host: xhci: remove #ifdef around PM functions
usb: musb: don't mark of_dev_auxdata as initdata
usb: misc: legousbtower: Fix buffers on stack
USB: Revert "cdc-wdm: fix "out-of-sync" due to missing notifications"
usb: Make sure usb/phy/of gets built-in
USB: storage: e-mail update in drivers/usb/storage/unusual_devs.h
usb: host: xhci: print correct command ring address
usb: host: xhci: delete sp_dma_buffers for scratchpad
usb: host: xhci: using correct specification chapter reference for DCBAAP
xhci: switch to pci_alloc_irq_vectors
usb: host: xhci-plat: set resume_quirk() for R-Car controllers
usb: host: xhci-plat: add resume_quirk()
usb: host: xhci-plat: enable clk in resume timing
usb: host: plat: Enable xHCI plat runtime PM
USB: serial: ftdi_sio: add device ID for Microsemi/Arrow SF2PLUS Dev Kit
USB: serial: constify static arrays
usb: fix some references for /proc/bus/usb
...
- Continue to re-factor code to prepare for eMMC CMDQ and blkmq support
- Introduce queue semantics to prepare for eMMC CMDQ and blkmq support
- Add helper functions to manage temporary enable/disable of eMMC CMDQ
- Improve wait-busy detection for SDIO
MMC host:
- cavium: Add driver to support Cavium controllers
- cavium: Extend Cavium driver to support Octeon SOCs and ThunderX SOCs
- bcm2835: Add new driver for Broadcom BCM2835 controller
- sdhci-xenon: Add driver to support Marvell Xenon SDHCI controller
- sdhci-tegra: Add support for the Tegra186 variant
- sdhci-of-esdhc: Support for UHS-I SD cards
- sdhci-of-esdhc: Support for eMMC HS200 cards
- sdhci-cadence: Add eMMC HS400 enhanced strobe support
- sdhci-esdhc-imx: Reset tuning circuit when needed
- sdhci-pci: Modernize and clean-up some PM related code
- sdhci-pci: Avoid re-tuning at runtime PM for some Intel devices
- sdhci-pci|acpi: Use aggressive PM for some Intel BYT controllers
- sdhci: Re-factoring and modernizations
- sdhci: Optimize delay loops
- sdhci: Improve register dump print format
- sdhci: Add support for the Command Queue Engine
- meson-gx: Various improvements and clean-ups
- meson-gx: Add support for CMD23
- meson-gx: Basic tuning support to avoid CRC errors
- s3cmci: Enable probing via DT
- mediatek: Improve tuning support for eMMC HS200 and HS400 mode
- tmio: Improve DMA support
- tmio: Use correct response for CMD12
- dw_mmc: Minor improvements and clean-ups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJZCF8JAAoJEP4mhCVzWIwpjikP/iLwYZOP+aNl1wvHXJ7/UtOB
bonqPPRLfW6mJkiphZyjnf3ZldS8DoUYp1Jh8gVsWoOPZhFuzAyFTGRJA5t0sEtH
WzV0X72qzfDESekP1KGZZPQSfqfo/UnIEwa7U0Rlw8jlpvVsbXimqw54e+hCE0n8
bhZjQihxOkXofCMnS4CxFJwbSCNEkdw6cMgNk72P8KAQllbOA3UbOurAbRUT0I6S
3H3+8uKh0fZp3BYGV5y8DxzqIRaCz3ed8TTuGFc3YU8sNGEF67AwcbBzfDaegNsR
qNPU12gccOU5IY8gbG/MMoEpSXodEj0RCW2uDqt+QT289eh3SpPLlS2en/iZj4t6
F1xnMEg48GpYJbiB4YImfK49c3RQXAtcdwf/v8SUcE4FUktuOsyQIozMglYIsUd1
fGZ3yr0caRBnwAkbj5GXaG3/VXzMExKYalf990kUuxhHHGuRQLLg0SHkfWNhJNA1
mw0XHXTrC9GO32PPfylgkdGOOCnlP36sbBPhGQqJUH6yeiy1wO4xoCVSO8iVI5J9
8W9BGgSYJRlPaItmH2syQEO9dSRMS5BLy7oICTBn+LsszXwMbuNn6cFBkhF1Xxwy
2MHU+b6EMn4V4qrp0c8gVfMraXkL9H7BwL9aCv1UTuti7d/7NM7G1wNW9qGala3Y
9cU8nzC1A521kfmDNPPO
=p+Hb
-----END PGP SIGNATURE-----
Merge tag 'mmc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Continue to re-factor code to prepare for eMMC CMDQ and blkmq support
- Introduce queue semantics to prepare for eMMC CMDQ and blkmq support
- Add helper functions to manage temporary enable/disable of eMMC CMDQ
- Improve wait-busy detection for SDIO
MMC host:
- cavium: Add driver to support Cavium controllers
- cavium: Extend Cavium driver to support Octeon and ThunderX SOCs
- bcm2835: Add new driver for Broadcom BCM2835 controller
- sdhci-xenon: Add driver to support Marvell Xenon SDHCI controller
- sdhci-tegra: Add support for the Tegra186 variant
- sdhci-of-esdhc: Support for UHS-I SD cards
- sdhci-of-esdhc: Support for eMMC HS200 cards
- sdhci-cadence: Add eMMC HS400 enhanced strobe support
- sdhci-esdhc-imx: Reset tuning circuit when needed
- sdhci-pci: Modernize and clean-up some PM related code
- sdhci-pci: Avoid re-tuning at runtime PM for some Intel devices
- sdhci-pci|acpi: Use aggressive PM for some Intel BYT controllers
- sdhci: Re-factoring and modernizations
- sdhci: Optimize delay loops
- sdhci: Improve register dump print format
- sdhci: Add support for the Command Queue Engine
- meson-gx: Various improvements and clean-ups
- meson-gx: Add support for CMD23
- meson-gx: Basic tuning support to avoid CRC errors
- s3cmci: Enable probing via DT
- mediatek: Improve tuning support for eMMC HS200 and HS400 mode
- tmio: Improve DMA support
- tmio: Use correct response for CMD12
- dw_mmc: Minor improvements and clean-ups"
* tag 'mmc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (148 commits)
mmc: sdhci-of-esdhc: limit SD clock for ls1012a/ls1046a
mmc: sdhci-of-esdhc: poll ESDHC_CLOCK_STABLE bit with udelay
mmc: sdhci-xenon: Fix default value of LOGIC_TIMING_ADJUST for eMMC5.0 PHY
mmc: sdhci-xenon: Fix the work flow in xenon_remove().
MIPS: Octeon: cavium_octeon_defconfig: Enable Octeon MMC
mmc: sdhci-xenon: Remove redundant dev_err call in get_dt_pad_ctrl_data()
mmc: cavium: Use module_pci_driver to simplify the code
mmc: cavium: Add MMC support for Octeon SOCs.
mmc: cavium: Fix detection of block or byte addressing.
mmc: core: Export API to allow hosts to get the card address
mmc: sdio: Fix sdio wait busy implement limitation
mmc: sdhci-esdhc-imx: reset tuning circuit when power on mmc card
clk: apn806: fix spelling mistake: "mising" -> "missing"
mmc: sdhci-of-esdhc: add delay between tuning cycles
mmc: sdhci: Control the delay between tuning commands
mmc: sdhci-of-esdhc: add tuning support
mmc: sdhci-of-esdhc: add support for signal voltage switch
mmc: sdhci-of-esdhc: add peripheral clock support
mmc: sdhci-pci: Allow for 3 bytes from Intel DSM
mmc: cavium: Fix a shift wrapping bug
...
Pull networking updates from David Millar:
"Here are some highlights from the 2065 networking commits that
happened this development cycle:
1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri)
2) Add a generic XDP driver, so that anyone can test XDP even if they
lack a networking device whose driver has explicit XDP support
(me).
3) Sparc64 now has an eBPF JIT too (me)
4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei
Starovoitov)
5) Make netfitler network namespace teardown less expensive (Florian
Westphal)
6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana)
7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger)
8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky)
9) Multiqueue support in stmmac driver (Joao Pinto)
10) Remove TCP timewait recycling, it never really could possibly work
well in the real world and timestamp randomization really zaps any
hint of usability this feature had (Soheil Hassas Yeganeh)
11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay
Aleksandrov)
12) Add socket busy poll support to epoll (Sridhar Samudrala)
13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso,
and several others)
14) IPSEC hw offload infrastructure (Steffen Klassert)"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits)
tipc: refactor function tipc_sk_recv_stream()
tipc: refactor function tipc_sk_recvmsg()
net: thunderx: Optimize page recycling for XDP
net: thunderx: Support for XDP header adjustment
net: thunderx: Add support for XDP_TX
net: thunderx: Add support for XDP_DROP
net: thunderx: Add basic XDP support
net: thunderx: Cleanup receive buffer allocation
net: thunderx: Optimize CQE_TX handling
net: thunderx: Optimize RBDR descriptor handling
net: thunderx: Support for page recycling
ipx: call ipxitf_put() in ioctl error path
net: sched: add helpers to handle extended actions
qed*: Fix issues in the ptp filter config implementation.
qede: Fix concurrency issue in PTP Tx path processing.
stmmac: Add support for SIMATIC IOT2000 platform
net: hns: fix ethtool_get_strings overflow in hns driver
tcp: fix wraparound issue in tcp_lp
bpf, arm64: fix jit branch offset related to ldimm64
bpf, arm64: implement jiting of BPF_XADD
...
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.12:
API:
- Add batch registration for acomp/scomp
- Change acomp testing to non-unique compressed result
- Extend algorithm name limit to 128 bytes
- Require setkey before accept(2) in algif_aead
Algorithms:
- Add support for deflate rfc1950 (zlib)
Drivers:
- Add accelerated crct10dif for powerpc
- Add crc32 in stm32
- Add sha384/sha512 in ccp
- Add 3des/gcm(aes) for v5 devices in ccp
- Add Queue Interface (QI) backend support in caam
- Add new Exynos RNG driver
- Add ThunderX ZIP driver
- Add driver for hardware random generator on MT7623 SoC"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (101 commits)
crypto: stm32 - Fix OF module alias information
crypto: algif_aead - Require setkey before accept(2)
crypto: scomp - add support for deflate rfc1950 (zlib)
crypto: scomp - allow registration of multiple scomps
crypto: ccp - Change ISR handler method for a v5 CCP
crypto: ccp - Change ISR handler method for a v3 CCP
crypto: crypto4xx - rename ce_ring_contol to ce_ring_control
crypto: testmgr - Allow ecb(cipher_null) in FIPS mode
Revert "crypto: arm64/sha - Add constant operand modifier to ASM_EXPORT"
crypto: ccp - Disable interrupts early on unload
crypto: ccp - Use only the relevant interrupt bits
hwrng: mtk - Add driver for hardware random generator on MT7623 SoC
dt-bindings: hwrng: Add Mediatek hardware random generator bindings
crypto: crct10dif-vpmsum - Fix missing preempt_disable()
crypto: testmgr - replace compression known answer test
crypto: acomp - allow registration of multiple acomps
hwrng: n2 - Use devm_kcalloc() in n2rng_probe()
crypto: chcr - Fix error handling related to 'chcr_alloc_shash'
padata: get_next is never NULL
crypto: exynos - Add new Exynos RNG driver
...
Start to populate the device tree of the Armada 37xx with the pincontrol
configuration used on the board providing a dts.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add the nodes for the two pin controller present in the Armada 37xx SoCs.
Initially the node was named gpio1 using the same name that for the
register range in the datasheet. However renaming it pinctr_nb (nb for
North Bridge) makes more sens.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
SC9860G is a 8 cores of A53 SoC with 4G LTE support SoC from Spreadtrum.
According to regular hierarchy of sprd dts, whale2.dtsi contains SoC
peripherals IP nodes, sc9860.dtsi contains stuff related to ARM core stuff
and sp9860g dts is for the board level.
Signed-off-by: Orson Zhai <orson.zhai@spreadtrum.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJY+jQpAAoJEME3ZuaGi4PXmkAP/i9Sbf+bYZqa32Zv8zh0hu8r
KQ6iJ7N7fANYqBe+/H7gBXvjLq5VWsPMMkJSDBOVHWXH76iQAji7w+ORc75VlWXw
gpx+rLQMflMAFk7yq7Ern+V7Nj+ZmEZSUK455//M2cBPBsrpSt9qtKVZd/IxzcbP
zexpcwYilTv890sXtJfOVZgHzBTQ996XbD0VrI2HAH1XFiGgEFEyViSgPpikS/gZ
MyQjSRi0t+ETp45oNIQuMcNgBrR1naDm+VVOhiQXNW3cXrDkQ0ENMrEGtpbaOC/X
ngfNJk8f3wrGg+kS2H2v1/PeUYiWXNBTCFR/CNoBcDyvLHXEjPtI7LO/pAKKgfBQ
H1Bqxquk+QvgtGJEoshuVOWJixjZ3WEAUZ3kNgYHp2YHf/+mvff6STgxb2RePj74
ZSZInREUST/mc8M3DzjCVGnMUPIpbvOQnWPLkdAmtWXxm4lyIblXV9YPJUjRsaTQ
xpKhnpIpEG1N4mfb/VNGKm8kEs5MWV6j6ajejScTCnqgD+CGzTy9cVZKOMRd4MEz
+1L+BOcR9lvnTey0WghVPrpl3CZAskVpI5gq2o7jrg2GsfTifZ4BxxQKktZXjcrM
n6x9Hlr4yBT0zLzT36yfM5+jyzUuSv3EQHcgolcBdlSJX6isQwQJAZhXO9B824tA
ckVPhI4X43BGscjszMTs
=NymV
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Pull "Fix DTC warnings in Exynos ARMv7 Device Tree sources." from Krzysztof Kozłowski:
* tag 'samsung-dt-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Use - instead of @ for DT OPP entries
- Fix DTC warnings in Exynos ARM64 Device Tree sources.
- Add panel node to TM2E board.
-----BEGIN PGP SIGNATURE-----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=JgAW
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64
Pull "Second update of Samsung DeviceTree ARM64 for v4.12" from Krzysztof Kozłowski:
- Fix DTC warnings in Exynos ARM64 Device Tree sources.
- Add panel node to TM2E board.
* tag 'samsung-dt64-4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Use - instead of @ for DT OPP entries
arm64: dts: exynos: Add support for s6e3hf2 panel device on TM2e board
1. Couple of fixes to remove device tree warnings introduced with
recently added checks in DTC
2. Add information about L1 and L2 caches to Juno device trees as
CCSIDR-based cacheinfo probing is now removed
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABCAAGBQJY95CUAAoJEABBurwxfuKYiREP/1SKsiZsRsaX9EfnIT+5GtLO
8K0UT4lDZz/co6OHPODWFhwiFAeuLALQ5WCX1qTippF/HrPs5xNFK7x1Qxku46Hj
dEr++8S4QHBg0CevxBK5RvmiAc3V+xzCt98b5sVWuvXYRUR3rLQMeT1bm23ms76D
96oFFMuJ0JzsVsYypiLw1GVwoH+rLVfyuevnknNqnIhJ+FPuGgREh16+FqzCL6RT
KrpJiRcA2ZAlge7krQxvP2zRv3Q3hkSu5O2ORFbNFc7EybszZUaIolBQ6+KJW9Ol
NPVu6plUibmJeki4GY7iyyx0MTyK0Dg1WbDHj8Ag7Z3up2OVdcFWz4/lpvNtQIq5
/4BFK7XJyrk7SJphWI4UePjCK+6oU/WA6AeB5ZI1X8BLHgbK7I1YYYWN/qL94MEZ
0pyVfOuBsF5yodyoXbt47MSa1UbvaRPEFbzvyywXPR97MZza+JHlmw4Kgg+paB9k
n93X7Kd693bRBQwaqjeLuXCyYK/6jZWzJAJx/uN7i+pL6NceR0w/9VMYU9G9WXj2
qrLsCqx6AAjqYQho2iVcfBAIVjwP50GKb+/0pcb3i8Lo/gtNX+lSXqWgA3lKRPCH
x43PerYGh49STAfMk4VR+WC95bpiohk6JUpk3kJ2WLy9v86EJ9usnX1wflL1wW5f
V/KNxYcnjuOZLRXiFt4u
=5Rho
-----END PGP SIGNATURE-----
Merge tag 'juno-fixes-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt64
Pull "ARMv8 Juno DT fixes for v4.12" from Sudeep Holla:
1. Couple of fixes to remove device tree warnings introduced with
recently added checks in DTC
2. Add information about L1 and L2 caches to Juno device trees as
CCSIDR-based cacheinfo probing is now removed
* tag 'juno-fixes-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: add information about L1 and L2 caches
arm64: dts: juno: fix few unit address format warnings
arm64: dts: juno: fix PCI bus dtc warnings
Add fixed clock of 400MHz to system controller driver. This clock is
used as SD/eMMC clock source.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-by: Omri Itach <omrii@marvell.com>
Reviewed-by: Hanna Hawa <hannah@marvell.com>
[fixed up conflicts, added error handling --rmk]
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Compiling the DT file with W=1, DTC warns like follows:
Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a
unit name, but no reg property
Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
[k.kozlowski: Split patch per ARM and ARM64]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Compiling the DT file with W=1, DTC warns like follows:
Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a
unit name, but no reg property
Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
[k.kozlowski: Split patch per ARM and ARM64]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This patch adds the panel device tree node for s6e3hf2 display
controller to TM2e dts.
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
A function in kernel/bpf/syscall.c which got a bug fix in 'net'
was moved to kernel/bpf/verifier.c in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
- crypto engine description for the Armada 7k/8k SoCs and the boards
using it
- SDHCI description for the Armada 37xx and 7k/8k SoCs and the boards
using it
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWO+ljCMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71Q9dAJ4i+PBERM8X
wh0AI0kekOBF33L4YQCcDr5wYXQdCYgwnTBVYadOHvce61A=
=zSnq
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.12-2' of git://git.infradead.org/linux-mvebu into next/dt64
mvebu dt64 for 4.12 (part 2)
- crypto engine description for the Armada 7k/8k SoCs and the boards
using it
- SDHCI description for the Armada 37xx and 7k/8k SoCs and the boards
using it
* tag 'mvebu-dt64-4.12-2' of git://git.infradead.org/linux-mvebu:
arm64: marvell: dts: enable the crypto engine on the Armada 8040 DB
arm64: marvell: dts: enable the crypto engine on the Armada 7040 DB
arm64: marvell: dts: add crypto engine description for 7k/8k
arm64: dts: marvell: add sdhci support for Armada 7K/8K
arm64: dts: marvell: add eMMC support for Armada 37xx
Signed-off-by: Olof Johansson <olof@lixom.net>
- Reset the hi6220 mmc hosts to avoid hang
- Add the binding for the hi3798cv200 SoC and the poplar board
- Add basic dts files to support the hi3798cv200 poplar board
- Enable the Mbigen, XGE, RoCE and SAS for the hip07 d05 board
- Add driver strength MACRO for the hi3660 SoC
- Add the pinctrl dtsi file for hikey960 board to configure the pins
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5zO6
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-dt-for-4.12' of git://github.com/hisilicon/linux-hisi into next/dt64
ARM64: DT: Hisilicon SoC DT updates for 4.12
- Reset the hi6220 mmc hosts to avoid hang
- Add the binding for the hi3798cv200 SoC and the poplar board
- Add basic dts files to support the hi3798cv200 poplar board
- Enable the Mbigen, XGE, RoCE and SAS for the hip07 d05 board
- Add driver strength MACRO for the hi3660 SoC
- Add the pinctrl dtsi file for hikey960 board to configure the pins
* tag 'hisi-arm64-dt-for-4.12' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hisi: add pinctrl dtsi file for HiKey960 development board
arm64: dts: hisi: add drive strength levels of the pins for Hi3660 SoC
arm64: dts: hisi: enable the NIC and SAS for the hip07-d05 board
arm64: dts: hisi: add SAS nodes for the hip07 SoC
arm64: dts: hisi: add RoCE nodes for the hip07 SoC
arm64: dts: hisi: add network related nodes for the hip07 SoC
arm64: dts: hisi: add mbigen nodes for the hip07 SoC
arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board
dt-bindings: arm: hisilicon: add bindings for hi3798cv200 SoC and Poplar board
arm64: dts: hi6220: Reset the mmc hosts
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add mmc devices for ZX296718 SoC and enable those available on
zx296718-evb board.
- Add VOU controller device, output devices HDMI and TVENC, and enable
display support for zx296718-evb board.
- Remove pll_vga clock from ZX296718 device tree, as it's not a fixed
rate clock.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJY66HJAAoJEFBXWFqHsHzOUREH/RADjsUVP/5Jb1Dqs9FghOzK
DxIsFEc6TaeeDEzBA8p2jnd4xUi0vBSuJJw77QS/tYLt0eB+ermqw5MFYHknMyOY
OeDUx15fnC0n9WSkC4IFqlGXCnBuibcxjILSLwzsZ4jdVnvZtJ0nFAEckOpqeRDj
N9byLnK8fDZhlMP1A/opZhL51WKRSL/ImkqguoC5+Mm+/Lq2OuTtQukobfVHlTjc
lePX5uTPAujXoA9olHn0oliTPA/BDV9+ZWId4tqBSYxdJ06w0KqRiCk8xW04d1qF
BXEVOv4jo5HdTDa0ikUBcvvn0vD4RqZR6Wo/1I88nHY4mNJKF4ibqlMguL1mueA=
=d5as
-----END PGP SIGNATURE-----
Merge tag 'zte-dt64-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64
ZTE arm64 device tree updates for 4.12:
- Add mmc devices for ZX296718 SoC and enable those available on
zx296718-evb board.
- Add VOU controller device, output devices HDMI and TVENC, and enable
display support for zx296718-evb board.
- Remove pll_vga clock from ZX296718 device tree, as it's not a fixed
rate clock.
* tag 'zte-dt64-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: zte: add tvenc device for zx296718
arm64: dts: zte: add vou and hdmi devices for zx296718
arm64: dts: zte: add mmc devices for zx296718
arm64: dts: zte: remove zx296718 pll_vga clock
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add support of LS2088A SoC, which is a derivative of existing
LS2080A SoC, and the major difference is on ARM cores.
- Add support of LS1088A SoC which includes eight Cortex-A53 cores
with 32 KB L1 D-cache and I-cache respectively.
- Add crypto and thermal device support for LS1012A platform.
- Add ECC register region for SATA device on LS1012A, LS1043A and
LS1046A platforms.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJY649rAAoJEFBXWFqHsHzO3O4H/Ry5BxyUsrIziFCMNv05chEw
/C5AJVGGHyZTc2q/nGeR+wkDXhB7p7xX9D4Fzl+lAss58J20yB403dbrc5r2cmPk
aataxt1q4wfH9KekGlEqkolkQrMPRb7i+j36xpjVUCeFww8C8rszFC3CJwcTLFX8
pdhykfIpKz/Osy1hWH4Nt9Ss3L+8DhmQGh1bueriggQ5f/MPkhZUk7goK4j8mlC+
i5oWcO6wWvTXg1HTW+PbtBFJWqQ7ztb0qHSikoJ8yWtIkzehlcgrO7qkdf8hI8pV
gj48OMrvS4b/aYsAKmfVGCDpNqedoJDVbPRXkES8/z1avkKUmGLnhr9Ftdw7saA=
=BYDv
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64
Freescale arm64 device tree updates for 4.12:
- Add support of LS2088A SoC, which is a derivative of existing
LS2080A SoC, and the major difference is on ARM cores.
- Add support of LS1088A SoC which includes eight Cortex-A53 cores
with 32 KB L1 D-cache and I-cache respectively.
- Add crypto and thermal device support for LS1012A platform.
- Add ECC register region for SATA device on LS1012A, LS1043A and
LS1046A platforms.
* tag 'imx-dt64-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: Add entry for FSL LS1088A RDB, QDS boards
dt-bindings: clockgen: Add compatible string for LS1088A
arm64: dts: Add support for FSL's LS1088A SoC
arm64: dts: ls1012a: add crypto node
arm64: dts: ls1012a: add thermal monitor node
arm64: dts: updated sata node on ls1012a platform
arm64: dts: added ecc register address to sata node on ls1046a
arm64: dts: added ecc register address to sata node on ls1043a
arm64: dts: freescale: ls2088a: Add DTS support for FSL's LS2088A SoC
arm64: dts: freescale: ls2080a: Split devicetree for code resuability
dt-bindings: Add compatible for LS2088A QDS and RDB board
Signed-off-by: Olof Johansson <olof@lixom.net>
default memory definition on the px5 eval board. While the bootloader
should already override it with the actual amount, it's better to not
carry around wrong values.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAljpQgUQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgSriCACyesU9O1mz0CHWArxHY1O4UJ8SYdZqotOv
Q8XVWA7H9wrLMazyauHDGxZ63PbSMuhkOzpbUwBl6BEgUtVtr2j0c8JgvLk7IAqS
07ggX/7cYoqCLB8CKqkgdGKYjWIVwkGm0zL7lBwtlF6WnTl92B+gHEll8sv8R7ua
EO1Biq+o/XZrmsBoBBWtnaJdZYAcIMEU3qRtI4mInvOHkDCEvW0kaKuPT9A2h75j
7Asgpn0Na3sqX3UPAk5F1+YCEV40aZ10qPV1HurKL1E61HepDWs3rjymyXh0H12q
B9yzOGPfxdoU21rCAu1HtMu4ujo5ppvKRajeE4nyag92TTuP2lu4
=tcTl
-----END PGP SIGNATURE-----
Merge tag 'v4.12-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64
Basic support for new rk3328, a 4-core Cortex-A53 soc and a fix for the
default memory definition on the px5 eval board. While the bootloader
should already override it with the actual amount, it's better to not
carry around wrong values.
* tag 'v4.12-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: fix the memory size of PX5 Evaluation board
arm64: dts: rockchip: add RK3328 eavluation board devicetree
dt-bindings: document rockchip rk3328-evb board
arm64: dts: rockchip: add core dtsi file for RK3328 SoCs
dt-bindings: add binding for rk3328-grf
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Add IR, touchscreen and panel to TM2/TM2E boards.
2. Add proper clock frequency properties to DSI nodes.
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJY6OyZAAoJEME3ZuaGi4PXMTUP/RErX9qqM49S4ygyFqgMcDy7
i7Zbkgxl9MfNOzzRLRUD9POsI7VjdCvOks1AWV6RMw1TOKHEjF/ChRsFoZBaneZu
UKSybe50sB+Xqok4Wo1RN+FRo9tVaOtOlPdQguR1f9salR40/eg6XC4tTdbsjzSE
m74+pnUdZuGTvXwkwrdXShKYgk0Z5fsBlM3QhOnG1XXfs+A/1yzpxDuDapB4WU/K
s+z2dQ7VtA5SaoAhpAwuejdlu41W7NkYVSp3Ejoc4eZiIqPQuzv7djb0uT6K+SPh
Wmq4m2UQX3UWU48aDHdFoEeS03mX0ILNZAuDOiW2ZrAmXUVIXwh94VVjp0j3pNGB
fda1mRGk85jZBBenAi0BIhqVYmK1oBRTpOHQpgriGM6SOcJMUhLCeQBcL6fJ+/hu
x1kI6+6bgC5s5lPeYGk/k+XFF6No1pbc6g4UAG/BlWQ8A9g5Uu5ZsvY9cIxHxEtx
2AAXWJ7uLpztxuAryENRVHiiMY7w+FJBXuNbtSW9TYQx3lsVjmEsyiDHaMIVy6V8
r/cuKPtcj0/pDNY1lg4N0DpjPZpISx66viFIzfM5Fg6fiLRtNurzuUCbDj75Xckl
Nx9vrxpgBFfwU4q++HItB2n8HykewusCC3TCs8YNOeHs1yRUvhlEwVswGqtNoKuc
5uGMtR4P0EqhwmU4AMXd
=kk6u
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64
Samsung DeviceTree ARM64 update for v4.12:
1. Add IR, touchscreen and panel to TM2/TM2E boards.
2. Add proper clock frequency properties to DSI nodes.
* tag 'samsung-dt64-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Add the burst and esc clock frequency properties to DSI node
arm64: dts: exynos: Add support for S6E3HA2 panel device on TM2 board
arm64: dts: exynos: Add stmfts touchscreen node for TM2 and TM2E
arm64: dts: exynos: Enable ir-spi in the TM2 and TM2E boards
Signed-off-by: Olof Johansson <olof@lixom.net>
Corrections:
* r8a7795: Correct SATA device size to 2MiB for r8a7795 SoC
Cleanup:
* Drop _clk suffix from X12 clock node name for r8a7795 SoC
Enhancements:
* Add reset control properties for r8a779[56]
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=HWqJ
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-dt2-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64
Second Round of Renesas ARM64 Based SoC DT Updates for v4.12
Corrections:
* r8a7795: Correct SATA device size to 2MiB for r8a7795 SoC
Cleanup:
* Drop _clk suffix from X12 clock node name for r8a7795 SoC
Enhancements:
* Add reset control properties for r8a779[56]
* tag 'renesas-arm64-dt2-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: r8a7795: salvator-x: Drop _clk suffix from X12 clock node name
arm64: dts: r8a7796: Add reset control properties
arm64: dts: r8a7795: Add reset control properties
arm64: dts: r8a7795: Correct SATA device size to 2MiB
Signed-off-by: Olof Johansson <olof@lixom.net>
This adds a bunch of features for Tegra186, such as PMC, ethernet, I2C,
SDHCI and GPIO. It also enables various features on the P2771 devkit.
A small fix is made to the compatible string list for the flow
controller on Tegra132 and the IOMMU is enabled for host1x on Tegra210.
-----BEGIN PGP SIGNATURE-----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=yRy3
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.12-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt64
arm64: tegra: Device tree changes for v4.12-rc1
This adds a bunch of features for Tegra186, such as PMC, ethernet, I2C,
SDHCI and GPIO. It also enables various features on the P2771 devkit.
A small fix is made to the compatible string list for the flow
controller on Tegra132 and the IOMMU is enabled for host1x on Tegra210.
* tag 'tegra-for-4.12-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Update the Tegra132 flowctrl compatible string
arm64: tegra: Add GPU node for Tegra186
arm64: tegra: Enable IOMMU for host1x on Tegra210
arm64: tegra: Enable VIC on Tegra210
arm64: tegra: Add GPIO expanders on P2771
arm64: tegra: Add power monitors on P2771
arm64: tegra: Add GPIO keys on P2771
arm64: tegra: Enable current monitors on P3310
arm64: tegra: Enable SD/MMC slot on P2771
arm64: tegra: Enable SDHCI controllers on P3110
arm64: tegra: Add initial power tree for P3310
arm64: tegra: Enable ethernet on P3310
arm64: tegra: Enable I2C controllers on P3310
arm64: tegra: Invert the PMC interrupt on P3310
arm64: tegra: Add ethernet support for Tegra186
arm64: tegra: Add PMC controller on Tegra186
Signed-off-by: Olof Johansson <olof@lixom.net>
H5 patches for 4.12, which are mostly related to reworking the H3 DTSI to
be usable on the arm64 H5 DTSI, that shares almost everything with the H3
but the CPU cores.
We then have patches to support the H5 boards on top.
-----BEGIN PGP SIGNATURE-----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=ilmt
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-h5-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64
Allwinner H5 DT changes for 4.12
H5 patches for 4.12, which are mostly related to reworking the H3 DTSI to
be usable on the arm64 H5 DTSI, that shares almost everything with the H3
but the CPU cores.
We then have patches to support the H5 boards on top.
* tag 'sunxi-dt-h5-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: sunxi: h3/h5: switch apb0-related clocks to r_ccu
arm64: allwinner: h5: enable USB OTG on Orange Pi PC 2 board
arm64: allwinner: h5: add support for the Orange Pi PC 2 board
arm64: allwinner: h5: add Allwinner H5 .dtsi
ARM: sunxi: h3/h5: add usb_otg and OHCI/EHCI for usbc0 on H3/H5
arm: sun8i: h3: split Allwinner H3 .dtsi
arm: sun8i: h3: correct the GIC compatible in H3 to gic-400
arm: sun8i: h3: drop pinctrl-a10.h inclusion for H3 DTSI
arm: sun8i: h3: drop skeleton.dtsi inclusion in H3 DTSI
Signed-off-by: Olof Johansson <olof@lixom.net>
Some patches to enable the PRCM block in the A64
-----BEGIN PGP SIGNATURE-----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=5XFn
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt64-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64
Allwinner arm64 DT changes for 4.12
Some patches to enable the PRCM block in the A64
* tag 'sunxi-dt64-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: a64: add R_PIO pinctrl node
arm64: allwinner: a64: add r_ccu node
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit a8d4636f96 ("arm64: cacheinfo: Remove CCSIDR-based cache
information probing") removed mechanism to extract cache information
based on CCSIDR register as the architecture explicitly states no
inference about the actual sizes of caches based on CCSIDR registers.
Commit 9a802431c5 ("arm64: cacheinfo: add support to override cache
levels via device tree") had already provided options to override cache
information from the device tree.
This patch adds the information about L1 and L2 caches on all variants
of Juno platform.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This patch fixes the following set of warnings on juno.
smb@08000000 unit name should not have leading 0s
sysctl@020000 simple-bus unit address format error, expected "20000"
apbregs@010000 simple-bus unit address format error, expected "10000"
mmci@050000 simple-bus unit address format error, expected "50000"
kmi@060000 simple-bus unit address format error, expected "60000"
kmi@070000 simple-bus unit address format error, expected "70000"
wdt@0f0000 simple-bus unit address format error, expected "f0000"
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This adds the serial slave device for the WL1835 Bluetooth interface.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Enable the cryptographic engine available in the CP110 master on the
Armada 8040 DB. Do not enable the one in the CP110 salve for now, as we
do not support multiple cryptographic engines yet.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Enable the cryptographic engine available in the CP110 master on the
Armada 7040 DB.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add the description of the crypto engine hardware block for the Marvell
Armada 7k and Armada 8k processors; for both the CP110 slave and master.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add the eMMC support for Armada 37xx SoC and enable it in the Armada 3720
DB board.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Add pinctrl dtsi file for HiKey960 development board, enable
5 pinmux devices and 1 pinconf device, also include some nodes
of configurations for pins.
Signed-off-by: Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add 3 SAS host controller nodes and the dependent subctrl node
to enable the SAS and SATA function for the hip07 SoC.
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Two fixes for the recent A33 cpufreq support, and one to fix a missing
register in the A64 USB PHY node.
-----BEGIN PGP SIGNATURE-----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=lFNZ
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-4.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes
Allwinner fixes for 4.11, bis
Two fixes for the recent A33 cpufreq support, and one to fix a missing
register in the A64 USB PHY node.
* tag 'sunxi-fixes-for-4.11-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: allwinner: a64: add pmu0 regs for USB PHY
ARM: sun8i: a33: add operating-points-v2 property to all nodes
ARM: sun8i: a33: remove highest OPP to fix CPU crashes
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit 122682b2abb6 ("arm64: dts: rockchip: Add PX5 Evaluation board")
sets the memory size to 2 GB, but this board only has 1 GB DRAM, so change
it to the correct value here.
Fixes: 122682b2abb6 ("arm64: dts: rockchip: Add PX5 Evaluation board")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The USB PHY in A64 has a "pmu0" region, which controls the EHCI/OHCI
controller pair that can be connected to the PHY0.
Add the MMIO region for PHY node.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Add basic dts files for hi3798cv200-poplar board. Poplar is the
first development board compliant with the 96Boards Enterprise
Edition TV Platform specification. The board features the
Hi3798CV200 with an integrated quad-core 64-bit ARM Cortex A53
processor and high performance Mali T720 GPU.
Signed-off-by: Jiancheng Xue <xuejiancheng@hisilicon.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The MMC hosts could be left in an unconsistent or uninitialized state from
the firmware. Instead of assuming, the firmware did the right things, let's
reset the host controllers.
This change fixes a bug when the mmc2/sdio is initialized leading to a hung
task:
[ 242.704294] INFO: task kworker/7:1:675 blocked for more than 120 seconds.
[ 242.711129] Not tainted 4.9.0-rc8-00017-gcf0251f #3
[ 242.716571] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 242.724435] kworker/7:1 D 0 675 2 0x00000000
[ 242.729973] Workqueue: events_freezable mmc_rescan
[ 242.734796] Call trace:
[ 242.737269] [<ffff00000808611c>] __switch_to+0xa8/0xb4
[ 242.742437] [<ffff000008d07c04>] __schedule+0x1c0/0x67c
[ 242.747689] [<ffff000008d08254>] schedule+0x40/0xa0
[ 242.752594] [<ffff000008d0b284>] schedule_timeout+0x1c4/0x35c
[ 242.758366] [<ffff000008d08e38>] wait_for_common+0xd0/0x15c
[ 242.763964] [<ffff000008d09008>] wait_for_completion+0x28/0x34
[ 242.769825] [<ffff000008a1a9f4>] mmc_wait_for_req_done+0x40/0x124
[ 242.775949] [<ffff000008a1ab98>] mmc_wait_for_req+0xc0/0xf8
[ 242.781549] [<ffff000008a1ac3c>] mmc_wait_for_cmd+0x6c/0x84
[ 242.787149] [<ffff000008a26610>] mmc_io_rw_direct_host+0x9c/0x114
[ 242.793270] [<ffff000008a26aa0>] sdio_reset+0x34/0x7c
[ 242.798347] [<ffff000008a1d46c>] mmc_rescan+0x2fc/0x360
[ ... ]
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The current practice is to not add _clk suffixes to clock node names in
DT, as these names are used as the actual clock names.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The HDMI modes needs more CMA memory to be reserved at boot-time.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Now that 3adbf34273 "iio: adc: add a driver for the SAR ADC found in
Amlogic Meson SoCs" has added support for the ADC, let's enable it
on Odroid C2.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Allwinner A64 have a dedicated pin controller to manage the PL pin bank.
As the driver and the required clock support are added, add the device
node for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
A64 SoC have a CCU (r_ccu) in PRCM block.
Add the device node for it.
The mux 3 of R_CCU is an internal oscillator, which is 16MHz according
to the user manual, and has only 30% accuracy based on our experience
on older SoCs. The real mesaured value of it on two Pine64 boards is
around 11MHz, which is around 70% of 16MHz.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Update the Tegra132 flowctrl compatible string to include
"nvidia,tegra132-flowctrl" so it is aligned with the flowctrl binding
documentation.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the DT node for the GP10B GPU on Tegra186.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The core addition is the support for the rk3399-based Gru family of
ChromeOS devices, like the Kevin board which is the recently released
Samsung Chromebook Plus. Additionally the usb3 controllers are added
to rk3399 as they're used on Gru devices and even without full type-c
support they can at least drive usb2 devices already.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAljY62IQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgYkKCACdlgqbhUPiGj/xGqSlBRdWzX20nMAmFMLh
jPDSX3wjOTtmxCUoyGB4eac/823fVydVzf0OeLGTyJc7zx3IS+7p6dPMdV0ulLio
UAKyhJk6HbAOWdQXRZFQbSGeWfcaRB12gu5uNbUiwaDsD7Pguk2z/H/z9pS03ydB
OIXB3UrIKl0YW0CYhqH6Rt09af/8q3IaTDVwJpAXvAUNVcYogUK797fTXsxH8CD2
e92qmtbEEdI6FGsACP6OTQx2mBDZCd+weABaacxKhIJ9IPce8QHVtcZj2VjH43L7
TzIZkQ4b5MMG176mpofNzv2+O3i9BAzAkoX87czz7Y9fwuf7pFfy
=rqs0
-----END PGP SIGNATURE-----
Merge tag 'v4.12-rockchip-dts64-symlinks-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64
Pull "Rockchip dts64 updates (using arm/arm64 symlinks) for 4.12 part1" from Heiko Stübner
Rockchip dts changes based on the newly created arm/arm64 symlinks.
The core addition is the support for the rk3399-based Gru family of
ChromeOS devices, like the Kevin board which is the recently released
Samsung Chromebook Plus. Additionally the usb3 controllers are added
to rk3399 as they're used on Gru devices and even without full type-c
support they can at least drive usb2 devices already.
* tag 'v4.12-rockchip-dts64-symlinks-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: add regulator info for Kevin digitizer
arm64: dts: rockchip: describe Gru/Kevin OPPs + CPU regulators
arm64: dts: rockchip: add Gru/Kevin DTS
dt-bindings: Document rk3399 Gru/Kevin
arm64: dts: rockchip: support dwc3 USB for rk3399
default, mmc-resets) and also removes the wrongly added idle states, that
do not match the hardware's capabilities, as well as some general rk3399
pcie fixes as well as also the mmc resets.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAljY6c0QHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgdIYB/wKt/kONmWhi3RsXCXFUv/PBM0NToKvUq5e
5LvprMvIb/dyEBpA1bSaxOmktYDmEzqQFfxBOT7gfWX8/N+oFLWsfLsMNGkReev0
QPxQaITA1sOVSqDPWb5Pw4jDJ58CKUH1Cvj9GU1NuU3qp5ioggMTr/RFk2FsQ2wi
AJTDmyRHIp2Hfr7C//H85U7qd0NB0xQJz4GpZ98HnuZoSzpeQs7SRikOr4PZAaEA
mqsFizsELiAee/BmsTsppjzEIM5MpCIe91fx4S5NBNbnbmy2pFvXsmL5QazTWyao
FiWPPcIWuEVnuVLWXAGn4vLlKJG7DH+aJSOtN482J/fRnaTZABU6
=/nLm
-----END PGP SIGNATURE-----
Merge tag 'v4.12-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64
Pull "Rockchip dts64 updates for 4.12 part1" from Heiko Stübner:
Contains various changes for the rk3368 (dma, i2s, disable mailbox per
default, mmc-resets) and also removes the wrongly added idle states, that
do not match the hardware's capabilities, as well as some general rk3399
pcie fixes as well as also the mmc resets.
* tag 'v4.12-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: fix PCIe domain number for rk3399
arm64: dts: rockchip: add rk3399 dw-mmc resets
arm64: dts: rockchip: add rk3368 dw-mmc resets
arm64: dts: rockchip: disable mailbox of RK3368 SoCs per default
arm64: dts: rockchip: add i2s nodes support for RK3368 SoCs
arm64: dts: rockchip: add dmac nodes for rk3368 SoCs
arm64: dts: rockchip: remove wrongly added idle states on rk3368
arm64: dts: rockchip: sort rk3399-pcie by unit address
4.12, please pull the following:
- Rob enables the cryptographic block on Northstar 2 (SPU) by adding the proper
Device Tree nodes
- Jon replaces all occurences of: status = "ok" with status = "okay" to better
conform to the Device Tree specification
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJY1VaOAAoJEIfQlpxEBwcEcV4P/3jbaahcHY8RQgzUEV2IOHL6
r82SI54BGNzrLRZQCeOQopUzTSiVtpSuFkjaZZr3zsKg0rFOQL5krQQiqXFq4m4G
uzzBRCFXJb4ePE/czylE6YyNZFjAiQmpvWltNJwRQ8vbEml5M3B/PEfWaW9OTFxx
5FulbvF1RG4zU0BG3DS1YggejQqNmNiT/CvwVBg1qLq2m9yGXd8XVsIRKMVxKGTx
YZnxAEKueE/DqY5N9WvwKcTPP7JzBPPSPLqbSlPFI5+uRKn/EQ6pHBbSzCQXGEjb
hpfKkMK2gFhnNw0Uvb9k5cT/sbst3evsaYGTE6q2DplKchCF1D1OQbUK5Dqn2ork
MvitS7zkOavHrx+QPP0QkwPjWJrcCNnlIGwjFR/L8xl1Cz0WvSg9npyLVJr5kjmH
uLDnx1RxKzDDaf/K42ZmuABRC7OURf2w7ARoAD4Z8Y4hRe+in7A9YTP8pHMjOcgG
BR1aSr6zgLnqvMJDT+p0WrCTiEnd4rOJKL2zM/mmYdlYzkLe+HQ1YTi3mkCkEaTR
Ao6TH8uAGJnc5ve7xY50ChNDlbKOUL6Nip/RMiayqr6JfG5OkMoqkrhF9gLYcnNo
c4zLRT7sKBXJrYHqgo3xZuk41mYaiqoSsYiuXS283T1miOK1BWZ0ZzqIP+MH53yz
yA1EmWP1XdHuU6hvKrZ8
=yeV5
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.12/devicetree-arm64' of http://github.com/Broadcom/stblinux into next/dt64
Pull "Broadcom devicetree-arm64 changes for 4.12" from Florian Fainelli:
This pull request contains Broadcom ARM64-based SoCs Device Tree updates for
4.12, please pull the following:
- Rob enables the cryptographic block on Northstar 2 (SPU) by adding the proper
Device Tree nodes
- Jon replaces all occurences of: status = "ok" with status = "okay" to better
conform to the Device Tree specification
* tag 'arm-soc/for-4.12/devicetree-arm64' of http://github.com/Broadcom/stblinux:
arm64: dts: NS2: convert "ok" to "okay"
arm64: dts: NS2: Add Broadcom SPU driver DT entry
- Add RTC support on Armada 7k/8k
- Improve i2c support on Armada 37xx
- Add gpio expander and RTC on Armada 3720 board
- Improve USB3 support on Armada 37xx
- Add network support on Armada 7k/8k
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWNVViCMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71b/NAJ9Y60FsHOFK
08mr2r3h/4+ydzlxWQCfQeR509BowT9/i92+Rl1ZhqS7SS0=
=kbjv
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.12-1' of git://git.infradead.org/linux-mvebu into next/dt64
Pull "mvebu dt64 for 4.12 (part 1)" from Gregory CLEMENT:
- Add RTC support on Armada 7k/8k
- Improve i2c support on Armada 37xx
- Add gpio expander and RTC on Armada 3720 board
- Improve USB3 support on Armada 37xx
- Add network support on Armada 7k/8k
* tag 'mvebu-dt64-4.12-1' of git://git.infradead.org/linux-mvebu:
arm64: marvell: dts: add PPv2.2 description to Armada 7K/8K
ARM64: dts: marvell: armada-3720 add RTC support
ARM64: dts: marvell: armada-3720-db: Add phy for USB3
ARM64: dts: marvell: armada-37xx: Add clock resource for USB3
ARM64: dts: marvell: armada-37xx: Fix interrupt mapping for USB3
ARM64: dts: marvell: armada-3720-db: add gpio expander
ARM64: dts: marvell: armada37xx: add address and size property for i2c cells
arm64: dts: marvell: add RTC description for Armada 7K/8K
Move and update device tree files as part of transition from Broadcom
Vulcan to Cavium ThunderX2.
The changes are to:
* rename dts/broadcom/vulcan.dtsi to cavium/thunder2-99xx.dtsi,
update cpu cores to be "cavium,thunder2", and update SoC to be
"cavium,thunderx2-cn9900"
* move SoC dts/broadcom/vulcan-eval.dtsi to cavium/thunder2-99xx.dtsi
and update board name string
* Update dts/broadcom/Makefile not to build vulcan dtbs
* Update dts/cavium/Makefile to build thunder2 dtbs
No changes to the dts contents except the updated "compatible" and
"model" properties.
Signed-off-by: Jayachandran C <jnair@caviumnetworks.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Declare a ramoops memory segment to aid debugging for those without UART
access. Verified to carry console log when holding volume down for 15
seconds.
No memory region for ramoops-like support was found downstream, so the
arbitrarily picked region is the last MB of System RAM.
Cc: John Stultz <john.stultz@linaro.org>
Cc: Mart Raudsepp <leio@gentoo.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
