Remove the checks for interrupts from unknown sources. This situation
should never occur and the checks were doing nothing to help the
situation.
Also, the portion of the function for handling counter interrupts is
reapeated four times (once for each counter), but is completely identical
save for the register is is accessing, so we can handle all four counters
with a for loop.
Finally, the interrupt handler is incorrectly setting and then checking
devpriv->timer_select_mode before processing some of the triggered
interrupts, so just remove all occurrences of this.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk.>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
apci1564_cos_insn_config() is currently using apci1564_reset() to disable
digital input interrupts when the configuration operation is
COMEDI_DIGITAL_TRIG_DISABLE. However, this is incorrect as the device reset
function also resets the registers for the digital outputs, timer, watchdog, and
counters as well. Replace the reset function call with a direct disabling of
just the digital input interrupts.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk.>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit aed3f9d (staging: comedi: addi_apci_1564: absorb apci1564_reset()) moved
the only use of addi_watchdog.h from hwdrv_apci1564.c to addi_apci_1564.c, but
left the include statement itself in the former file. Move this include to the
file which actually uses it.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk.>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes line lengths in the
drivers/staging/bcm/InterfaceMisc.c
file.
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add myself and Matthias Beyer as maintainers for
the bcm wimax driver.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add myself and Matthias Beyer
to the TODO file as the list of maintainers.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch outsources a chunk of code into an own function and refactors
the variable names inside the new function.
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Acked-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the `process_done` variable from both
format_eth_hdr_to_stack() and read_bulk_callback() (where it is
declared), as it is not used anywhere (it is set in the
format_eth_hdr_to_stack() function, but afterwards not used).
Acked-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch outsources a chunk of code into a function.
Acked-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Matthias Beyer <mail@beyermatthias.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The latest vendor code makes changes to uSIFS and uDIFS.
The orginal codes have been rearranged into a fall through switch
statement.
These reduce the time that device allows to TX packets and
improves throughput.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device refuses to associate to older access points even though in
the logs it appears to be associated in tkip or ccmp mode.
Clear bit from key_entry_inuse in pairwise key so the entry is over written
by group address.
This doesn't seem to make any difference to newer access points and
is a temporary fix until a better solution is found.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
skb_push the headroom and trimmed back to 0
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit fixes a few sparse warnings for missing the 'static' keyword
in array definitions:
drivers/staging//vt6655/rxtx.c:81:22: warning: symbol 'wTimeStampOff' was not declared. Should it be static?
drivers/staging//vt6655/rxtx.c:86:22: warning: symbol 'wFB_Opt0' was not declared. Should it be static?
drivers/staging//vt6655/rxtx.c:90:22: warning: symbol 'wFB_Opt1' was not declared. Should it be static?
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver reports the rate tried in struct vnt_interrupt_data tsr* variables
which is available in INTnsProcessData via interrupt urb context.
Instead of closing apTD tx context in s_nsBulkOutIoCompleteWrite by setting
in_use to false. Keep the context open and allow vnt_int_report_rate to
close it.
If the tx_retry value is correct it will report back the sucessful RATE tried.
struct vnt_usb_send_context add pkt_no which is index of apTD
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Power setting is already done in vnt_config and vnt_tx_packet.
Just check that for connection_channel, if invalid return.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The changing channel is so fast when off channel that changing power is pointless.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The byCurPwr value can change state while in another thread,.
Change to local variable power which is the last set value.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Turn the radio off to save power is the device is unused
on system.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On 2GHz band the values of wCurrentRate match the idx rates.
However, on 5GHz they do not because in channel.c vnt_rates_a do not
match idx.
Instead use the info->control.rates[0].idx the value that was tried.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver already report low_level_stats via vnt_interrupt_data.
Allow mac80211 to collect them via vnt_get_stats
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rename camel case function FreeCircBlock() to ced_free_circ_block()
Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rename camel case function GetCircBlock() to ced_get_circ_block()
Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rename camel case function SetCircular() to ced_set_circular()
Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rename camel case function DbgStopLoop() to ced_dbg_stop_loop()
Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rename camel case function DbgGetData() to ced_dbg_get_data()
Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rename camel case function DbgRampAddr() to ced_dbg_ramp_addr()
Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rename camel case function DbgRampData() to ced_dbg_ramp_data()
Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rename camel case function DbgPoke() to ced_dbg_poke()
Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rename camel case function DbgPeek() to ced_dbg_peek()
Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rename camel case function DbgCmd1401() to ced_dbg_cmd()
Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rename camel case function TransferFlags() to ced_transfer_flags()
Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rename camel case function TypeOf1401() to ced_type_of_1401()
Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rename camel case function CheckSelfTest() to ced_check_self_test()
Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rename camel case function StartSelfTest() to ced_start_self_test()
Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rename camel case function StateOf1401() to ced_state_of_1401()
Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
