Commit Graph

11551 Commits

Author SHA1 Message Date
Lin Ma
67fbcd62f5 tools/kvm_stat: add '-f help' to get the available event list
Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-26 19:04:53 +02:00
Lin Ma
efcb521943 tools/kvm_stat: use variables instead of hard paths in help output
Using variables instead of hard paths makes the requirements information
more accurate.

Signed-off-by: Lin Ma <lma@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-26 19:04:52 +02:00
Edward Cree
545722cb0f selftests/bpf: subtraction bounds test
There is a bug in the verifier's handling of BPF_SUB: [a,b] - [c,d] yields
 was [a-c, b-d] rather than the correct [a-d, b-c].  So here is a test
 which, with the bogus handling, will produce ranges of [0,0] and thus
 allowed accesses; whereas the correct handling will give a range of
 [-255, 255] (and hence the right-shift will give a range of [0, 255]) and
 the accesses will be rejected.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24 14:02:55 -07:00
Linus Torvalds
bbcdea658f Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
 "Two hw-enablement patches, two race fixes, three fixes for regressions
  of semantics, plus a number of tooling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Add proper condition to run sched_task callbacks
  perf/core: Fix locking for children siblings group read
  perf/core: Fix scheduling regression of pinned groups
  perf/x86/intel: Fix debug_store reset field for freq events
  perf/x86/intel: Add Goldmont Plus CPU PMU support
  perf/x86/intel: Enable C-state residency events for Apollo Lake
  perf symbols: Accept zero as the kernel base address
  Revert "perf/core: Drop kernel samples even though :u is specified"
  perf annotate: Fix broken arrow at row 0 connecting jmp instruction to its target
  perf evsel: State in the default event name if attr.exclude_kernel is set
  perf evsel: Fix attr.exclude_kernel setting for default cycles:p
2017-07-21 11:12:48 -07:00
David S. Miller
7a68ada6ec Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2017-07-21 03:38:43 +01:00
Linus Torvalds
96080f6977 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) BPF verifier signed/unsigned value tracking fix, from Daniel
    Borkmann, Edward Cree, and Josef Bacik.

 2) Fix memory allocation length when setting up calls to
    ->ndo_set_mac_address, from Cong Wang.

 3) Add a new cxgb4 device ID, from Ganesh Goudar.

 4) Fix FIB refcount handling, we have to set it's initial value before
    the configure callback (which can bump it). From David Ahern.

 5) Fix double-free in qcom/emac driver, from Timur Tabi.

 6) A bunch of gcc-7 string format overflow warning fixes from Arnd
    Bergmann.

 7) Fix link level headroom tests in ip_do_fragment(), from Vasily
    Averin.

 8) Fix chunk walking in SCTP when iterating over error and parameter
    headers. From Alexander Potapenko.

 9) TCP BBR congestion control fixes from Neal Cardwell.

10) Fix SKB fragment handling in bcmgenet driver, from Doug Berger.

11) BPF_CGROUP_RUN_PROG_SOCK_OPS needs to check for null __sk, from Cong
    Wang.

12) xmit_recursion in ppp driver needs to be per-device not per-cpu,
    from Gao Feng.

13) Cannot release skb->dst in UDP if IP options processing needs it.
    From Paolo Abeni.

14) Some netdev ioctl ifr_name[] NULL termination fixes. From Alexander
    Levin and myself.

15) Revert some rtnetlink notification changes that are causing
    regressions, from David Ahern.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits)
  net: bonding: Fix transmit load balancing in balance-alb mode
  rds: Make sure updates to cp_send_gen can be observed
  net: ethernet: ti: cpsw: Push the request_irq function to the end of probe
  ipv4: initialize fib_trie prior to register_netdev_notifier call.
  rtnetlink: allocate more memory for dev_set_mac_address()
  net: dsa: b53: Add missing ARL entries for BCM53125
  bpf: more tests for mixed signed and unsigned bounds checks
  bpf: add test for mixed signed and unsigned bounds checks
  bpf: fix up test cases with mixed signed/unsigned bounds
  bpf: allow to specify log level and reduce it for test_verifier
  bpf: fix mixed signed/unsigned derived min/max value bounds
  ipv6: avoid overflow of offset in ip6_find_1stfragopt
  net: tehuti: don't process data if it has not been copied from userspace
  Revert "rtnetlink: Do not generate notifications for CHANGEADDR event"
  net: dsa: mv88e6xxx: Enable CMODE config support for 6390X
  dt-binding: ptp: Add SoC compatibility strings for dte ptp clock
  NET: dwmac: Make dwmac reset unconditional
  net: Zero terminate ifr_name in dev_ifname().
  wireless: wext: terminate ifr name coming from userspace
  netfilter: fix netfilter_net_init() return
  ...
2017-07-20 16:33:39 -07:00
Daniel Borkmann
8641250251 bpf: more tests for mixed signed and unsigned bounds checks
Add a couple of more test cases to BPF selftests that are related
to mixed signed and unsigned checks.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-20 15:20:27 -07:00
Edward Cree
b712296a41 bpf: add test for mixed signed and unsigned bounds checks
These failed due to a bug in verifier bounds handling.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-20 15:20:27 -07:00
Daniel Borkmann
a150213286 bpf: fix up test cases with mixed signed/unsigned bounds
Fix the few existing test cases that used mixed signed/unsigned
bounds and switch them only to one flavor. Reason why we need this
is that proper boundaries cannot be derived from mixed tests.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-20 15:20:27 -07:00
Daniel Borkmann
d655490417 bpf: allow to specify log level and reduce it for test_verifier
For the test_verifier case, it's quite hard to parse log level 2 to
figure out what's causing an issue when used to log level 1. We do
want to use bpf_verify_program() in order to simulate some of the
tests with strict alignment. So just add an argument to pass the level
and put it to 1 for test_verifier.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-20 15:20:27 -07:00
John Fastabend
9d6e005287 xdp: bpf redirect with map sample program
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Tested-by: Andy Gospodarek <andy@greyhouse.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-17 09:48:06 -07:00
John Fastabend
546ac1ffb7 bpf: add devmap, a map for storing net device references
Device map (devmap) is a BPF map, primarily useful for networking
applications, that uses a key to lookup a reference to a netdevice.

The map provides a clean way for BPF programs to build virtual port
to physical port maps. Additionally, it provides a scoping function
for the redirect action itself allowing multiple optimizations. Future
patches will leverage the map to provide batching at the XDP layer.

Another optimization/feature, that is not yet implemented, would be
to support multiple netdevices per key to support efficient multicast
and broadcast support.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-17 09:48:06 -07:00
sixiao@microsoft.com
1c3a044c60 tools: hv: ignore a NIC if it has been configured
Let bondvf.sh ignore this NIC if it has been configured, to prevent
user configuration from being overwritten unexpectly.

Signed-off-by: Simon Xiao <sixiao@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-16 16:36:01 -07:00
Linus Torvalds
867eacd7fb Merge branch 'akpm' (patches from Andrew)
Merge even more updates from Andrew Morton:

 - a few leftovers

 - fault-injector rework

 - add a module loader test driver

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  kmod: throttle kmod thread limit
  kmod: add test driver to stress test the module loader
  MAINTAINERS: give kmod some maintainer love
  xtensa: use generic fb.h
  fault-inject: add /proc/<pid>/fail-nth
  fault-inject: simplify access check for fail-nth
  fault-inject: make fail-nth read/write interface symmetric
  fault-inject: parse as natural 1-based value for fail-nth write interface
  fault-inject: automatically detect the number base for fail-nth write interface
  kernel/watchdog.c: use better pr_fmt prefix
  MAINTAINERS: move the befs tree to kernel.org
  lib/atomic64_test.c: add a test that atomic64_inc_not_zero() returns an int
  mm: fix overflow check in expand_upwards()
2017-07-14 21:57:25 -07:00
Luis R. Rodriguez
6d7964a722 kmod: throttle kmod thread limit
If we reach the limit of modprobe_limit threads running the next
request_module() call will fail.  The original reason for adding a kill
was to do away with possible issues with in old circumstances which would
create a recursive series of request_module() calls.

We can do better than just be super aggressive and reject calls once we've
reached the limit by simply making pending callers wait until the
threshold has been reduced, and then throttling them in, one by one.

This throttling enables requests over the kmod concurrent limit to be
processed once a pending request completes.  Only the first item queued up
to wait is woken up.  The assumption here is once a task is woken it will
have no other option to also kick the queue to check if there are more
pending tasks -- regardless of whether or not it was successful.

By throttling and processing only max kmod concurrent tasks we ensure we
avoid unexpected fatal request_module() calls, and we keep memory
consumption on module loading to a minimum.

With x86_64 qemu, with 4 cores, 4 GiB of RAM it takes the following run
time to run both tests:

time ./kmod.sh -t 0008
real    0m16.366s
user    0m0.883s
sys     0m8.916s

time ./kmod.sh -t 0009
real    0m50.803s
user    0m0.791s
sys     0m9.852s

Link: http://lkml.kernel.org/r/20170628223155.26472-4-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michal Marek <mmarek@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14 15:05:13 -07:00
Luis R. Rodriguez
d9c6a72d6f kmod: add test driver to stress test the module loader
This adds a new stress test driver for kmod: the kernel module loader.
The new stress test driver, test_kmod, is only enabled as a module right
now.  It should be possible to load this as built-in and load tests
early (refer to the force_init_test module parameter), however since a
lot of test can get a system out of memory fast we leave this disabled
for now.

Using a system with 1024 MiB of RAM can *easily* get your kernel OOM
fast with this test driver.

The test_kmod driver exposes API knobs for us to fine tune simple
request_module() and get_fs_type() calls.  Since these API calls only
allow each one parameter a test driver for these is rather simple.
Other factors that can help out test driver though are the number of
calls we issue and knowing current limitations of each.  This exposes
configuration as much as possible through userspace to be able to build
tests directly from userspace.

Since it allows multiple misc devices its will eventually (once we add a
knob to let us create new devices at will) also be possible to perform
more tests in parallel, provided you have enough memory.

We only enable tests we know work as of right now.

Demo screenshots:

 # tools/testing/selftests/kmod/kmod.sh
kmod_test_0001_driver: OK! - loading kmod test
kmod_test_0001_driver: OK! - Return value: 256 (MODULE_NOT_FOUND), expected MODULE_NOT_FOUND
kmod_test_0001_fs: OK! - loading kmod test
kmod_test_0001_fs: OK! - Return value: -22 (-EINVAL), expected -EINVAL
kmod_test_0002_driver: OK! - loading kmod test
kmod_test_0002_driver: OK! - Return value: 256 (MODULE_NOT_FOUND), expected MODULE_NOT_FOUND
kmod_test_0002_fs: OK! - loading kmod test
kmod_test_0002_fs: OK! - Return value: -22 (-EINVAL), expected -EINVAL
kmod_test_0003: OK! - loading kmod test
kmod_test_0003: OK! - Return value: 0 (SUCCESS), expected SUCCESS
kmod_test_0004: OK! - loading kmod test
kmod_test_0004: OK! - Return value: 0 (SUCCESS), expected SUCCESS
kmod_test_0005: OK! - loading kmod test
kmod_test_0005: OK! - Return value: 0 (SUCCESS), expected SUCCESS
kmod_test_0006: OK! - loading kmod test
kmod_test_0006: OK! - Return value: 0 (SUCCESS), expected SUCCESS
kmod_test_0005: OK! - loading kmod test
kmod_test_0005: OK! - Return value: 0 (SUCCESS), expected SUCCESS
kmod_test_0006: OK! - loading kmod test
kmod_test_0006: OK! - Return value: 0 (SUCCESS), expected SUCCESS
XXX: add test restult for 0007
Test completed

You can also request for specific tests:

 # tools/testing/selftests/kmod/kmod.sh -t 0001
kmod_test_0001_driver: OK! - loading kmod test
kmod_test_0001_driver: OK! - Return value: 256 (MODULE_NOT_FOUND), expected MODULE_NOT_FOUND
kmod_test_0001_fs: OK! - loading kmod test
kmod_test_0001_fs: OK! - Return value: -22 (-EINVAL), expected -EINVAL
Test completed

Lastly, the current available number of tests:

 # tools/testing/selftests/kmod/kmod.sh --help
Usage: tools/testing/selftests/kmod/kmod.sh [ -t <4-number-digit> ]
Valid tests: 0001-0009

0001 - Simple test - 1 thread  for empty string
0002 - Simple test - 1 thread  for modules/filesystems that do not exist
0003 - Simple test - 1 thread  for get_fs_type() only
0004 - Simple test - 2 threads for get_fs_type() only
0005 - multithreaded tests with default setup - request_module() only
0006 - multithreaded tests with default setup - get_fs_type() only
0007 - multithreaded tests with default setup test request_module() and get_fs_type()
0008 - multithreaded - push kmod_concurrent over max_modprobes for request_module()
0009 - multithreaded - push kmod_concurrent over max_modprobes for get_fs_type()

The following test cases currently fail, as such they are not currently
enabled by default:

 # tools/testing/selftests/kmod/kmod.sh -t 0008
 # tools/testing/selftests/kmod/kmod.sh -t 0009

To be sure to run them as intended please unload both of the modules:

  o test_module
  o xfs

And ensure they are not loaded on your system prior to testing them.  If
you use these paritions for your rootfs you can change the default test
driver used for get_fs_type() by exporting it into your environment.  For
example of other test defaults you can override refer to kmod.sh
allow_user_defaults().

Behind the scenes this is how we fine tune at a test case prior to
hitting a trigger to run it:

cat /sys/devices/virtual/misc/test_kmod0/config
echo -n "2" > /sys/devices/virtual/misc/test_kmod0/config_test_case
echo -n "ext4" > /sys/devices/virtual/misc/test_kmod0/config_test_fs
echo -n "80" > /sys/devices/virtual/misc/test_kmod0/config_num_threads
cat /sys/devices/virtual/misc/test_kmod0/config
echo -n "1" > /sys/devices/virtual/misc/test_kmod0/config_num_threads

Finally to trigger:

echo -n "1" > /sys/devices/virtual/misc/test_kmod0/trigger_config

The kmod.sh script uses the above constructs to build different test cases.

A bit of interpretation of the current failures follows, first two
premises:

a) When request_module() is used userspace figures out an optimized
   version of module order for us.  Once it finds the modules it needs, as
   per depmod symbol dep map, it will finit_module() the respective
   modules which are needed for the original request_module() request.

b) We have an optimization in place whereby if a kernel uses
   request_module() on a module already loaded we never bother userspace
   as the module already is loaded.  This is all handled by kernel/kmod.c.

A few things to consider to help identify root causes of issues:

0) kmod 19 has a broken heuristic for modules being assumed to be
   built-in to your kernel and will return 0 even though request_module()
   failed.  Upgrade to a newer version of kmod.

1) A get_fs_type() call for "xfs" will request_module() for "fs-xfs",
   not for "xfs".  The optimization in kernel described in b) fails to
   catch if we have a lot of consecutive get_fs_type() calls.  The reason
   is the optimization in place does not look for aliases.  This means two
   consecutive get_fs_type() calls will bump kmod_concurrent, whereas
   request_module() will not.

This one explanation why test case 0009 fails at least once for
get_fs_type().

2) If a module fails to load --- for whatever reason (kmod_concurrent
   limit reached, file not yet present due to rootfs switch, out of
   memory) we have a period of time during which module request for the
   same name either with request_module() or get_fs_type() will *also*
   fail to load even if the file for the module is ready.

This explains why *multiple* NULLs are possible on test 0009.

3) finit_module() consumes quite a bit of memory.

4) Filesystems typically also have more dependent modules than other
   modules, its important to note though that even though a get_fs_type()
   call does not incur additional kmod_concurrent bumps, since userspace
   loads dependencies it finds it needs via finit_module_fd(), it *will*
   take much more memory to load a module with a lot of dependencies.

Because of 3) and 4) we will easily run into out of memory failures with
certain tests.  For instance test 0006 fails on qemu with 1024 MiB of RAM.
It panics a box after reaping all userspace processes and still not
having enough memory to reap.

[arnd@arndb.de: add dependencies for test module]
  Link: http://lkml.kernel.org/r/20170630154834.3689272-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/20170628223155.26472-3-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michal Marek <mmarek@suse.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-14 15:05:13 -07:00
Linus Torvalds
ccd5d1b91f New IDT NTB driver and changes to the NTB infrastructure to allow for
this different kind of NTB HW, some style fixes (per Greg KH
 recommendation), and some ntb_test tweaks.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZZowhAAoJEG5mS6x6i9IjNx8P/0DTYNqBRXg4PSET7+6/Z6yq
 Gz09DRw42dwHXN70ytEwtdRP7jcp3agrvBpRty3EgBygpLlMfOA0iQ6crVdBaza0
 XzRuSl1iEd8oSX3CmJN8dIIWueNiPiqvG6as+j1kjZRZst21oqiMLTO3uO37oBh+
 7/ltCkQtQdco74fiaqnN1iDeKK2lj3qHPJxb2AbeGIxj3lOr6NttPifd0zovimtb
 keBCbaYyQaTxDoNzRwQmZtQNB2bwC/2V1sAM5L1T/xkVIBWXH8AUqJO1iVC4ptjI
 VURvxitDMo28JDc4hgO63AVHsvz8zLbgKsCNK0ia+rtalSLJkDBBN8Qaf7e10hbh
 6YUg2eXzIGusdvFowKnOdXhHYAqrQXMBcWgM2ZVe1YBj8QqZKQ0LL4h9ooVuP9HV
 2hZc3GfMT+iUGmQKdk+rtDVLxYNnsng1NT/5ZxCHBQptrb+/Rqey/wDYdPV2TpnD
 JfRpIFny29NOu74sa4W5GEPWI3AL7WAPAA1WH7RHy5rVDPfX20DcUQdvKvpo25y8
 IdH7caSiBrjpc2GQPvkaziHlLLdZoRNwqJnmHDyUatukdmrElV/oTIRhaYQmLMK0
 /xTFS7YXsmiOGqlfILW9VXdZIlLXSKuNSPX1HUcJ91l2Ik7m0PiK382jKOJVXqcZ
 Frt1CgnCclCDYHBD4yfm
 =SG8F
 -----END PGP SIGNATURE-----

Merge tag 'ntb-4.13' of git://github.com/jonmason/ntb

Pull NTB updates from Jon Mason:
 "The major change in the series is a rework of the NTB infrastructure
  to all for IDT hardware to be supported (and resulting fallout from
  that). There are also a few clean-ups, etc.

  New IDT NTB driver and changes to the NTB infrastructure to allow for
  this different kind of NTB HW, some style fixes (per Greg KH
  recommendation), and some ntb_test tweaks"

* tag 'ntb-4.13' of git://github.com/jonmason/ntb:
  ntb_netdev: set the net_device's parent
  ntb: Add error path/handling to Debug FS entry creation
  ntb: Add more debugfs support for ntb_perf testing options
  ntb: Remove debug-fs variables from the context structure
  ntb: Add a module option to control affinity of DMA channels
  NTB: Add IDT 89HPESxNTx PCIe-switches support
  ntb_hw_intel: Style fixes: open code macros that just obfuscate code
  ntb_hw_amd: Style fixes: open code macros that just obfuscate code
  NTB: Add ntb.h comments
  NTB: Add PCIe Gen4 link speed
  NTB: Add new Memory Windows API documentation
  NTB: Add Messaging NTB API
  NTB: Alter Scratchpads API to support multi-ports devices
  NTB: Alter MW API to support multi-ports devices
  NTB: Alter link-state API to support multi-port devices
  NTB: Add indexed ports NTB API
  NTB: Make link-state API being declared first
  NTB: ntb_test: add parameter for doorbell bitmask
  NTB: ntb_test: modprobe on remote host
2017-07-14 13:31:52 -07:00
Linus Torvalds
bc0f51d359 A few more minor updates:
- Show the tgid mappings for user space trace tools to use
 
  - Fix and optimize the comm and tgid cache recording
 
  - Sanitize derived kprobe names
 
  - Ftrace selftest updates
 
  - trace file header fix
 
  - Update of Documentation/trace/ftrace.txt
 
  - Compiler warning fixes
 
  - Fix possible uninitialized variable
 -----BEGIN PGP SIGNATURE-----
 
 iQExBAABCAAbBQJZZ2rbFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
 V3MIAI3NZ3dr0dKJ7DMF1jsQc24YF/bMG2noWm2b9+H/sO+gbnJKsizqzrB2Cm8S
 lFCYGSydLKGGZgKob3wkAX15iO2fxcUvJOKzkKxmyDbwAteABRf9LSr/llthRIsT
 8kSPI5bgJ5dah+lvhl9+1ekarsIZGr41svY97Knj9A2K18kQplnSNqgatkIuV2Kn
 hIoiPI0tG2y27In2JJoaTedAHj4NIwmI3nhTt6nks0GN7ICx3bMcvdE9l+zB+OLJ
 akAehsTk3kcNb66ttoj6ZTzGZ7kaes96Cl6/uamVpXzh3SXla36ux1r9Kp8bgONE
 EgrJwbRwU8BMDaattutDxT7/XmU=
 =TPGB
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull more tracing updates from Steven Rostedt:
 "A few more minor updates:

   - Show the tgid mappings for user space trace tools to use

   - Fix and optimize the comm and tgid cache recording

   - Sanitize derived kprobe names

   - Ftrace selftest updates

   - trace file header fix

   - Update of Documentation/trace/ftrace.txt

   - Compiler warning fixes

   - Fix possible uninitialized variable"

* tag 'trace-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Fix uninitialized variable in match_records()
  ftrace: Remove an unneeded NULL check
  ftrace: Hide cached module code for !CONFIG_MODULES
  tracing: Do note expose stack_trace_filter without DYNAMIC_FTRACE
  tracing: Update Documentation/trace/ftrace.txt
  tracing: Fixup trace file header alignment
  selftests/ftrace: Add a testcase for kprobe event naming
  selftests/ftrace: Add a test to probe module functions
  selftests/ftrace: Update multiple kprobes test for powerpc
  trace/kprobes: Sanitize derived event names
  tracing: Attempt to record other information even if some fail
  tracing: Treat recording tgid for idle task as a success
  tracing: Treat recording comm for idle task as a success
  tracing: Add saved_tgids file to show cached pid to tgid mappings
2017-07-13 13:17:19 -07:00
Linus Torvalds
ad51271afc Merge branch 'akpm' (patches from Andrew)
Merge yet more updates from Andrew Morton:

- various misc things

- kexec updates

- sysctl core updates

- scripts/gdb udpates

- checkpoint-restart updates

- ipc updates

- kernel/watchdog updates

- Kees's "rough equivalent to the glibc _FORTIFY_SOURCE=1 feature"

- "stackprotector: ascii armor the stack canary"

- more MM bits

- checkpatch updates

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (96 commits)
  writeback: rework wb_[dec|inc]_stat family of functions
  ARM: samsung: usb-ohci: move inline before return type
  video: fbdev: omap: move inline before return type
  video: fbdev: intelfb: move inline before return type
  USB: serial: safe_serial: move __inline__ before return type
  drivers: tty: serial: move inline before return type
  drivers: s390: move static and inline before return type
  x86/efi: move asmlinkage before return type
  sh: move inline before return type
  MIPS: SMP: move asmlinkage before return type
  m68k: coldfire: move inline before return type
  ia64: sn: pci: move inline before type
  ia64: move inline before return type
  FRV: tlbflush: move asmlinkage before return type
  CRIS: gpio: move inline before return type
  ARM: HP Jornada 7XX: move inline before return type
  ARM: KVM: move asmlinkage before type
  checkpatch: improve the STORAGE_CLASS test
  mm, migration: do not trigger OOM killer when migrating memory
  drm/i915: use __GFP_RETRY_MAYFAIL
  ...
2017-07-13 12:38:49 -07:00
Linus Torvalds
3a00be1923 RTC for 4.13
Subsystem:
  - expose non volatile RAM using nvmem instead of open coding in many
  drivers. Unfortunately, this option has to be enabled by default to not
  break existing users.
  - rtctest can now test for cutoff dates, showing when an RTC will start
  failing to properly save time and date.
  - new RTC registration functions to remove race conditions in drivers
 
 Newly supported RTCs:
  - Broadcom STB wake-timer
  - Epson RX8130CE
  - Maxim IC DS1308
  - STMicroelectronics STM32H7
 
 Drivers:
  - ds1307: use regmap, use nvmem, more cleanups
  - ds3232: temperature reading support
  - gemini: renamed to ftrtc010
  - m41t80: use CCF to expose the clock
  - rv8803: use nvmem
  - s3c: many cleanups
  - st-lpc: fix y2106 bug
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAllnMUIACgkQAyWl4gNJ
 NJJGNxAAqMTrggkF6KTvFCVAoMHdkeAxuoyigwCH8BCm2gOm5Qj8ZodZxndcl3Gb
 dWG+c1pHf4KXrz59h6ZGI4qFgIpCyJpjGpyJs0Pvt6gY7YIqHrEa1nvcrPO7DaWw
 fPPcszyiymDOsb6d+wJzriA2ISJUHy7Kf6FUb0fjQLoYNl7ezgzdV6+dvePOPcW1
 kaAfRX8XqrkECrDFFHlX1Szb78qGhcUB1TmWFW+hadICTguBLX/fro0DKWRw2POQ
 y3cHKqMzFhTD1+jkp26o535x/D9CWDXzLmLvRF5tBQ0X7V2UIGchj4aNEHT0Ruwx
 YlGzB3WDwfj/Jl+VALmY27mplf71z5ppJRhaFn84OWrJmvjS/2EF9TCCBc4XvzzX
 dH/5nvPyNrUYnayTTCXiPhN3p4ivywHXqA9gkHcWb3BagNIpuvwNVnJT/Sxz3Y5R
 Gt2zGl07NKQ1EtEThQEIBOMXy9nJ2PVJdQFmLehj1PfxX+Gbs42tWBILzl4n1rgT
 yUFLMGw1Y0/h39jw7t+uKM7v0aXPHOXLrwaDKIj+c4ffVXD8IALhgG7BL4dOQPSF
 rRPKi5QNYJMnuBeKHJrFlq7xWqHRVUfTFh16eyYvwGLGWiUuGe9akhlabl6bE8jG
 fm3TlHPNieGMObXijwEVePkY6z7E0CLE+d1iQsDK6ZgO/z3pdOo=
 =QDxE
 -----END PGP SIGNATURE-----

Merge tag 'rtc-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "Here is the pull-request for the RTC subsystem for 4.13.

  Subsystem:

   - expose non volatile RAM using nvmem instead of open coding in many
     drivers. Unfortunately, this option has to be enabled by default to
     not break existing users.

   - rtctest can now test for cutoff dates, showing when an RTC will
     start failing to properly save time and date.

   - new RTC registration functions to remove race conditions in drivers

  Newly supported RTCs:

   - Broadcom STB wake-timer

   - Epson RX8130CE

   - Maxim IC DS1308

   - STMicroelectronics STM32H7

  Drivers:

   - ds1307: use regmap, use nvmem, more cleanups

   - ds3232: temperature reading support

   - gemini: renamed to ftrtc010

   - m41t80: use CCF to expose the clock

   - rv8803: use nvmem

   - s3c: many cleanups

   - st-lpc: fix y2106 bug"

* tag 'rtc-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (51 commits)
  rtc: Remove wrong deprecation comment
  nvmem: include linux/err.h from header
  rtc: st-lpc: make it robust against y2038/2106 bug
  rtc: rtctest: add check for problematic dates
  tools: timer: add rtctest_setdate
  rtc: ds1307: remove ds1307_remove
  rtc: ds1307: use generic nvmem
  rtc: ds1307: switch to rtc_register_device
  rtc: rv8803: remove rv8803_remove
  rtc: rv8803: use generic nvmem support
  rtc: rv8803: switch to rtc_register_device
  rtc: add generic nvmem support
  rtc: at91rm9200: remove race condition
  rtc: introduce new registration method
  rtc: class separate id allocation from registration
  rtc: class separate device allocation from registration
  rtc: stm32: add STM32H7 RTC support
  dt-bindings: rtc: stm32: add support for STM32H7
  rtc: ds1307: add ds1308 variant
  rtc: ds3232: add temperature support
  ...
2017-07-13 12:15:06 -07:00
Linus Torvalds
edaf382518 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

1) Fix 64-bit division in mlx5 IPSEC offload support, from Ilan Tayari
   and Arnd Bergmann.

2) Fix race in statistics gathering in bnxt_en driver, from Michael
   Chan.

3) Can't use a mutex in RCU reader protected section on tap driver, from
   Cong WANG.

4) Fix mdb leak in bridging code, from Eduardo Valentin.

5) Fix free of wrong pointer variable in nfp driver, from Dan Carpenter.

6) Buffer overflow in brcmfmac driver, from Arend van SPriel.

7) ioremap_nocache() return value needs to be checked in smsc911x
   driver, from Alexey Khoroshilov.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (34 commits)
  net: stmmac: revert "support future possible different internal phy mode"
  sfc: don't read beyond unicast address list
  datagram: fix kernel-doc comments
  socket: add documentation for missing elements
  smsc911x: Add check for ioremap_nocache() return code
  brcmfmac: fix possible buffer overflow in brcmf_cfg80211_mgmt_tx()
  net: hns: Bugfix for Tx timeout handling in hns driver
  net: ipmr: ipmr_get_table() returns NULL
  nfp: freeing the wrong variable
  mlxsw: spectrum_switchdev: Check status of memory allocation
  mlxsw: spectrum_switchdev: Remove unused variable
  mlxsw: spectrum_router: Fix use-after-free in route replace
  mlxsw: spectrum_router: Add missing rollback
  samples/bpf: fix a build issue
  bridge: mdb: fix leak on complete_info ptr on fail path
  tap: convert a mutex to a spinlock
  cxgb4: fix BUG() on interrupt deallocating path of ULD
  qed: Fix printk option passed when printing ipv6 addresses
  net: Fix minor code bug in timestamping.txt
  net: stmmac: Make 'alloc_dma_[rt]x_desc_resources()' look even closer
  ...
2017-07-12 19:30:57 -07:00
Michal Hocko
dcda9b0471 mm, tree wide: replace __GFP_REPEAT by __GFP_RETRY_MAYFAIL with more useful semantic
__GFP_REPEAT was designed to allow retry-but-eventually-fail semantic to
the page allocator.  This has been true but only for allocations
requests larger than PAGE_ALLOC_COSTLY_ORDER.  It has been always
ignored for smaller sizes.  This is a bit unfortunate because there is
no way to express the same semantic for those requests and they are
considered too important to fail so they might end up looping in the
page allocator for ever, similarly to GFP_NOFAIL requests.

Now that the whole tree has been cleaned up and accidental or misled
usage of __GFP_REPEAT flag has been removed for !costly requests we can
give the original flag a better name and more importantly a more useful
semantic.  Let's rename it to __GFP_RETRY_MAYFAIL which tells the user
that the allocator would try really hard but there is no promise of a
success.  This will work independent of the order and overrides the
default allocator behavior.  Page allocator users have several levels of
guarantee vs.  cost options (take GFP_KERNEL as an example)

 - GFP_KERNEL & ~__GFP_RECLAIM - optimistic allocation without _any_
   attempt to free memory at all. The most light weight mode which even
   doesn't kick the background reclaim. Should be used carefully because
   it might deplete the memory and the next user might hit the more
   aggressive reclaim

 - GFP_KERNEL & ~__GFP_DIRECT_RECLAIM (or GFP_NOWAIT)- optimistic
   allocation without any attempt to free memory from the current
   context but can wake kswapd to reclaim memory if the zone is below
   the low watermark. Can be used from either atomic contexts or when
   the request is a performance optimization and there is another
   fallback for a slow path.

 - (GFP_KERNEL|__GFP_HIGH) & ~__GFP_DIRECT_RECLAIM (aka GFP_ATOMIC) -
   non sleeping allocation with an expensive fallback so it can access
   some portion of memory reserves. Usually used from interrupt/bh
   context with an expensive slow path fallback.

 - GFP_KERNEL - both background and direct reclaim are allowed and the
   _default_ page allocator behavior is used. That means that !costly
   allocation requests are basically nofail but there is no guarantee of
   that behavior so failures have to be checked properly by callers
   (e.g. OOM killer victim is allowed to fail currently).

 - GFP_KERNEL | __GFP_NORETRY - overrides the default allocator behavior
   and all allocation requests fail early rather than cause disruptive
   reclaim (one round of reclaim in this implementation). The OOM killer
   is not invoked.

 - GFP_KERNEL | __GFP_RETRY_MAYFAIL - overrides the default allocator
   behavior and all allocation requests try really hard. The request
   will fail if the reclaim cannot make any progress. The OOM killer
   won't be triggered.

 - GFP_KERNEL | __GFP_NOFAIL - overrides the default allocator behavior
   and all allocation requests will loop endlessly until they succeed.
   This might be really dangerous especially for larger orders.

Existing users of __GFP_REPEAT are changed to __GFP_RETRY_MAYFAIL
because they already had their semantic.  No new users are added.
__alloc_pages_slowpath is changed to bail out for __GFP_RETRY_MAYFAIL if
there is no progress and we have already passed the OOM point.

This means that all the reclaim opportunities have been exhausted except
the most disruptive one (the OOM killer) and a user defined fallback
behavior is more sensible than keep retrying in the page allocator.

[akpm@linux-foundation.org: fix arch/sparc/kernel/mdesc.c]
[mhocko@suse.com: semantic fix]
  Link: http://lkml.kernel.org/r/20170626123847.GM11534@dhcp22.suse.cz
[mhocko@kernel.org: address other thing spotted by Vlastimil]
  Link: http://lkml.kernel.org/r/20170626124233.GN11534@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20170623085345.11304-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alex Belits <alex.belits@cavium.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: NeilBrown <neilb@suse.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:03 -07:00
Luis R. Rodriguez
7c43a657a4 test_sysctl: test against int proc_dointvec() array support
Add a few initial respective tests for an array:

  o Echoing values separated by spaces works
  o Echoing only first elements will set first elements
  o Confirm PAGE_SIZE limit still applies even if an array is used

Link: http://lkml.kernel.org/r/20170630224431.17374-7-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:00 -07:00
Luis R. Rodriguez
2920fad3a5 test_sysctl: add simple proc_douintvec() case
Test against a simple proc_douintvec() case.  While at it, add a test
against UINT_MAX.  Make sure UINT_MAX works, and UINT_MAX+1 will fail
and that negative values are not accepted.

Link: http://lkml.kernel.org/r/20170630224431.17374-6-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:00 -07:00
Luis R. Rodriguez
eb965eda1c test_sysctl: add simple proc_dointvec() case
Test against a simple proc_dointvec() case.  While at it, add a test
against INT_MAX.  Make sure INT_MAX works, and INT_MAX+1 will fail.
Also test negative values work.

Link: http://lkml.kernel.org/r/20170630224431.17374-5-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:00 -07:00
Luis R. Rodriguez
1c0357c846 test_sysctl: test against PAGE_SIZE for int
Add the following tests to ensure we do not regress:

  o Test using a buffer full of space (PAGE_SIZE-1) followed by a
    single digit works

  o Test using a buffer full of spaces (PAGE_SIZE or over) will fail

As tests increase instead of unloading the module and reloading it we
can just do a shell reset_vals() with a reset to values we know are set
at init on the driver.

Link: http://lkml.kernel.org/r/20170630224431.17374-4-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:00 -07:00
Luis R. Rodriguez
64b671204a test_sysctl: add generic script to expand on tests
This adds a generic script to let us more easily add more tests cases.
Since we really have only two types of tests cases just fold them into
the one file.  Each test unit is now identified into its separate
function:

    # ./sysctl.sh -l
  Test ID list:

  TEST_ID x NUM_TEST
  TEST_ID:   Test ID
  NUM_TESTS: Number of recommended times to run the test

  0001 x 1 - tests proc_dointvec_minmax()
  0002 x 1 - tests proc_dostring()

For now we start off with what we had before, and run only each test
once.  We can now watch a test case until it fails:

  ./sysctl.sh -w 0002

We can also run a test case x number of times, say we want to run a test
case 100 times:

  ./sysctl.sh -c 0001 100

To run a test case only once, for example:

  ./sysctl.sh -s 0002

The default settings are specified at the top of sysctl.sh.

Link: http://lkml.kernel.org/r/20170630224431.17374-3-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:00 -07:00
Luis R. Rodriguez
9308f2f9e7 test_sysctl: add dedicated proc sysctl test driver
The existing tools/testing/selftests/sysctl/ tests include two test
cases, but these use existing production kernel sysctl interfaces.  We
want to expand test coverage but we can't just be looking for random
safe production values to poke at, that's just insane!

Instead just dedicate a test driver for debugging purposes and port the
existing scripts to use it.  This will make it easier for further tests
to be added.

Subsequent patches will extend our test coverage for sysctl.

The stress test driver uses a new license (GPL on Linux, copyleft-next
outside of Linux).  Linus was fine with this [0] and later due to Ted's
and Alans's request ironed out an "or" language clause to use [1] which
is already present upstream.

[0] https://lkml.kernel.org/r/CA+55aFyhxcvD+q7tp+-yrSFDKfR0mOHgyEAe=f_94aKLsOu0Og@mail.gmail.com
[1] https://lkml.kernel.org/r/1495234558.7848.122.camel@linux.intel.com

Link: http://lkml.kernel.org/r/20170630224431.17374-2-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-12 16:26:00 -07:00
Arnaldo Carvalho de Melo
4b1303d0b0 perf symbols: Accept zero as the kernel base address
Which is the case in S/390, where symbols were not being resolved
because machine__get_kernel_start was only setting machine->kernel_start
when the just successfully loaded kernel symtab had its map->start set
to !0, when it was left at (1ULL << 63) assuming a partitioning of the
address space for user/kernel, which is not the case in S/390 nor in
Sparc.

So just check if map__load() was successfull and set
machine->kernel_start to zero, fixing kernel symbol resolution on S/390.

Test performed by Thomas:

 ----

  I like this patch. I have done a new build and removed all my debug output to start
  from scratch. Without your patch I get this:

  # Samples: 4  of event 'cpu-clock'
  # Event count (approx.): 1000000
  #
  # Children      Self  Command  Shared Object     Symbol
  # ........  ........  .......  ................  ........................
      75.00%     0.00%  true     [unknown]         [k] 0x00000000004bedda
              |
              ---0x4bedda
                 |
                 |--50.00%--0x42693a
                 |          |
                 |           --25.00%--0x2a72e0
                 |                     0x2af0ca
                 |                     0x3d1003fe4c0
                 |
                  --25.00%--0x4272bc
                            0x26fa84

  and with your patch (I just rebuilt the perf tool, nothing else and used the same
  perf.data file as input):

  # Samples: 4  of event 'cpu-clock'
  # Event count (approx.): 1000000
  #
  # Children      Self  Command  Shared Object               Symbol
  # ........  ........  .......  ..........................  ..................................
      75.00%     0.00%  true     [kernel.vmlinux]            [k] pgm_check_handler
              |
              ---pgm_check_handler
                 do_dat_exception
                 handle_mm_fault
                 __handle_mm_fault
                 filemap_map_pages
                 |
                 |--25.00%--rcu_read_lock_held
                 |          rcu_lockdep_current_cpu_online
                 |          0x3d1003ff4c0
                 |
                  --25.00%--lock_release

  Looks good to me....
 ----

Reported-and-Tested-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com>
Link: http://lkml.kernel.org/n/tip-dk0n1uzmbe0tbthrpfqlx6bz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-12 11:47:05 -03:00
Yonghong Song
533350227d samples/bpf: fix a build issue
With latest net-next:

====
clang  -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/6.3.1/include -I./arch/x86/include -I./arch/x86/include/generated/uapi -I./arch/x86/include/generated  -I./include -I./arch/x86/include/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/kconfig.h  -Isamples/bpf \
    -D__KERNEL__ -D__ASM_SYSREG_H -Wno-unused-value -Wno-pointer-sign \
    -Wno-compare-distinct-pointer-types \
    -Wno-gnu-variable-sized-type-not-at-end \
    -Wno-address-of-packed-member -Wno-tautological-compare \
    -Wno-unknown-warning-option \
    -O2 -emit-llvm -c samples/bpf/tcp_synrto_kern.c -o -| llc -march=bpf -filetype=obj -o samples/bpf/tcp_synrto_kern.o
samples/bpf/tcp_synrto_kern.c:20:10: fatal error: 'bpf_endian.h' file not found
          ^~~~~~~~~~~~~~
1 error generated.
====

net has the same issue.

Add support for ntohl and htonl in tools/testing/selftests/bpf/bpf_endian.h.
Also move bpf_helpers.h from samples/bpf to selftests/bpf and change
compiler include logic so that programs in samples/bpf can access the headers
in selftests/bpf, but not the other way around.

Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-11 20:51:29 -07:00
Jin Yao
80f62589fa perf annotate: Fix broken arrow at row 0 connecting jmp instruction to its target
When the jump instruction is displayed at the row 0 in annotate view,
the arrow is broken. An example:

 16.86 │   ┌──je     82
  0.01 │      movsd  (%rsp),%xmm0
       │      movsd  0x8(%rsp),%xmm4
       │      movsd  0x8(%rsp),%xmm1
       │      movsd  (%rsp),%xmm3
       │      divsd  %xmm4,%xmm0
       │      divsd  %xmm3,%xmm1
       │      movsd  (%rsp),%xmm2
       │      addsd  %xmm1,%xmm0
       │      addsd  %xmm2,%xmm0
       │      movsd  %xmm0,(%rsp)
       │82:   sub    $0x1,%ebx
 83.03 │    ↑ jne    38
       │      add    $0x10,%rsp
       │      xor    %eax,%eax
       │      pop    %rbx
       │    ← retq

The patch increments the row number before checking with 0.

Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Fixes: 944e1abed9 ("perf ui browser: Add method to draw up/down arrow line")
Link: http://lkml.kernel.org/r/1496901704-30275-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-10 16:36:40 -03:00
Arnaldo Carvalho de Melo
ede5626d30 perf evsel: State in the default event name if attr.exclude_kernel is set
When no event is specified perf will use the "cycles" hardware event
with the highest precision available in the processor, and excluding
kernel events for non-root users, so make that clear in the event name
by setting the "u" event modifier, i.e. "cycles:upp".

E.g.:

The default for root:

  # perf record usleep 1
  # perf evlist -v
  cycles:ppp: ..., precise_ip: 3, exclude_kernel: 0, ...
  #

And for !root:

  $ perf record usleep 1
  $ perf evlist -v
  cycles:uppp: ... , precise_ip: 3, exclude_kernel: 1, ...
  $

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-lf29zcdl422i9knrgde0uwy3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-10 16:19:25 -03:00
Arnaldo Carvalho de Melo
d37a369790 perf evsel: Fix attr.exclude_kernel setting for default cycles:p
To allow probing the max attr.precise_ip setting for non-root users
we unconditionally set attr.exclude_kernel, which makes the detection
work but should be done only for !root, fix it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 97365e8136 ("perf evsel: Set attr.exclude_kernel when probing max attr.precise_ip")
Link: http://lkml.kernel.org/n/tip-bl6bbxzxloonzvm4nvt7oqgj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-10 16:14:48 -03:00
Benjamin Gaignard
69c31226fc rtc: rtctest: add check for problematic dates
Some dates could be problematic because they reach the limits of
RTC hardware capabilities.
This patch add various of them but since it will change RTC date
it will be activated only when 'd' args is set.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-09 22:32:03 +02:00
Benjamin Gaignard
c96396f078 tools: timer: add rtctest_setdate
This tool allow to set directly the time and date to a RTC device.

Unlike other tools isn't doens't use "struct timeval" or "time_t"
so it is safe for 32bits platforms when testing for y2038/2106 bug.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-09 22:00:54 +02:00
Linus Torvalds
c3931a87db Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
 "A couple of fixes for perf and kprobes:

   - Add he missing exclude_kernel attribute for the precise_ip level so
     !CAP_SYS_ADMIN users get the proper results.

   - Warn instead of failing completely when perf has no unwind support
     for a particular architectiure built in.

   - Ensure that jprobes are at function entry and not at some random
     place"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  kprobes: Ensure that jprobe probepoints are at function entry
  kprobes: Simplify register_jprobes()
  kprobes: Rename [arch_]function_offset_within_entry() to [arch_]kprobe_on_func_entry()
  perf unwind: Do not fail due to missing unwind support
  perf evsel: Set attr.exclude_kernel when probing max attr.precise_ip
2017-07-09 10:49:47 -07:00
Linus Torvalds
19bf2e0ef1 Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Thomas Gleixner:
 "A fix to the objtool sibling call detection logic to distinguish
  normal jumps inside a function from a real sibling call"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix sibling call detection logic
2017-07-09 09:58:44 -07:00
Masami Hiramatsu
8cb0bc9e3f selftests/ftrace: Add a testcase for kprobe event naming
Add a testcase for kprobe event naming. This testcase checks whether the
kprobe events can automatically ganerate its event name on normal
function and dot-suffixed function.  Also it checks whether the kprobe
events can correctly define new event with given event name and group
name.

Link: http://lkml.kernel.org/r/61ae96fd1fcd14ee652c8b6525c218b8661bb0d2.1499453040.git.naveen.n.rao@linux.vnet.ibm.com

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
[Updated tests to use vfs_read and symbols with '.isra.',
added check for kprobe_events and a command to clear it on exit,
various additional checks and tests]
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-07-09 07:46:28 -04:00
Naveen N. Rao
ff431b1390 selftests/ftrace: Add a test to probe module functions
Add a kprobes test to ensure that we are able to add a probe on a
module function using 'p <mod>:<func>' format, with/without having to
specify a probe name.

Link: http://lkml.kernel.org/r/2d8087e25a7ad9206f3e2b7b4bb0c3c86eaa38af.1499453040.git.naveen.n.rao@linux.vnet.ibm.com

Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-07-09 07:46:25 -04:00
Naveen N. Rao
f7181e5aaa selftests/ftrace: Update multiple kprobes test for powerpc
KPROBES_ON_FTRACE is only available on powerpc64le. Update comment to
clarify this.

Also, we should use an offset of 8 to ensure that the probe does not
fall on ftrace location. The current offset of 4 will fall before the
function local entry point and won't fire, while an offset of 12 or 16
will fall on ftrace location. Offset 8 is currently guaranteed to not be
the ftrace location.

Link: http://lkml.kernel.org/r/3d32e8fa076070e83527476fdfa3a747bb9a1a3a.1499453040.git.naveen.n.rao@linux.vnet.ibm.com

Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-07-09 07:46:20 -04:00
Josh Poimboeuf
4855022a52 objtool: Fix sibling call detection logic
With some configs, objtool reports the following warning:

  arch/x86/kernel/ftrace.o: warning: objtool: ftrace_modify_code_direct()+0x2d: sibling call from callable instruction with modified stack frame

The instruction it's complaining about isn't actually a sibling call.
It's just a normal jump to an address inside the function.  Objtool
thought it was a sibling call because the instruction's jump_dest wasn't
initialized because the function was supposed to be ignored due to its
use of sync_core().

Objtool ended up validating the function instead of ignoring it because
it didn't properly recognize a sibling call to the function.  So fix the
sibling call logic.  Also add a warning to catch ignored functions being
validated so we'll get a more useful error message next time.

Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/96cc8ecbcdd8cb29ddd783817b4af918a6a171b0.1499437107.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-08 10:29:48 +02:00
Linus Torvalds
58f051fc98 Kbuild updates for v4.13
- Clean up Makefiles and scripts
 
 - Improve clang support
 
 - Remove unneeded genhdr-y syntax
 
 - Remove unneeded cc-option-align macro
 
 - Introduce __cc-option macro and use it to fix x86 boot code compiler flags
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZXrlEAAoJED2LAQed4NsGOQ0P/ic6kvcXoquvO47NeZeGgprN
 Ffy7yt06ZpKE6ntKT2YGf8vIkBADAnGBmP9lFga7JRTFrBS/4fDCEoosjb7a7yYG
 6QZ2CCVkpyUt5rizSFPiQ2A1EIsIvhQEHBGdE3upbX4dC6or/MRwWnyudYvFQYWc
 Ft5VGqENHxVIMCPm5pmNrZH4lOUv13KFlEWHFozPtwKXYIp8KZw88kJVJODPOuhM
 yWuXEkcg9f+SEjNeSn7uZ0P4JGDqeQz16EKW4/cMdERaqtb5diPNhUBIQ9X5qjR+
 wQg//tMFKjveKPr8bNHnzjHCwz7xto0GBnqYoXQO4cxMm7heNeFWAS09YnDd58JS
 hb3BCF3QpojaLQUFb/elo8Gaolx4FepKVnvbCCV03TJCB3zyKTSaAx0cJxoRCajd
 iR5FEUDA0pacM6380ifYEWUu98LgWxhJfrcQuJ1F+g3/8uoMqLIIpC7YsdnEGzy2
 Zhcz+Id5YMBla4w9ceUf9Zm+scCNxySWkANYPxC+QxwtNnDU5JrNhOnMXO/x4BEm
 rBICh3jY1gJRD/nuQ3L0XXX9taXD+z19DBsngt2XgVX6ec0EitZEkoR/f1yIrCNB
 zFfOeM2KD7Rg4iAzmE/L1clwJufXbZbRNKJjg5o2/1t2+TgRCnYNkCzCbr/Kqi8a
 ugje+BAynfUrARSJH1Uk
 =0ZOV
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

 - Clean up Makefiles and scripts

 - Improve clang support

 - Remove unneeded genhdr-y syntax

 - Remove unneeded cc-option-align macro

 - Introduce __cc-option macro and use it to fix x86 boot code compiler
   flags

* tag 'kbuild-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: improve comments on KBUILD_SRC
  x86/build: Specify stack alignment for clang
  x86/build: Use __cc-option for boot code compiler options
  kbuild: Add __cc-option macro
  kbuild: remove cc-option-align
  kbuild: replace genhdr-y with generated-y
  kbuild: clang: Disable 'address-of-packed-member' warning
  kbuild: remove duplicated arch/*/include/generated/uapi include path
  kbuild: speed up checksyscalls.sh
  kbuild: simplify silent build (-s) detection
2017-07-07 14:09:24 -07:00
Linus Torvalds
ef3ad0898a linux-kselftest-4.13-rc1-update
This update consists of:
 
 -- TAP13 framework and changes to some tests to convert to TAP13.
    Converting kselftest output to standard format will help identify
    run to run differences and pin point failures easily. TAP13 format
    has been in use for several years and the output is human friendly.
 
    Please find the specification:
    https://testanything.org/tap-version-13-specification.html
 
    Credit goes to Tim Bird for recommending TAP13 as a suitable format,
    and to Grag KH for kick starting the work with help from Paul Elder
    and Alice Ferrazzi
 
    The first phase of the TAp13 conversion is included in this update.
    Future updates will include updates to rest of the tests.
 
 -- Masami Hiramatsu fixed ftrace to run on 4.9 stable kernels.
 
 -- Kselftest documnetation has been converted to ReST format. Document
    now has a new home under Documentation/dev-tools.
 
 -- kselftest_harness.h is now available for general use as a result of
    Mickaël Salaün's work.
 
 -- Several fixes to skip and/or fail tests gracefully on older releases.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJZXo9JAAoJEAsCRMQNDUMc1OUQAOJsBFWiMgWWxOZg1RBT5khl
 7OvGLoHsu3qydF5gzVnyDuEZAGHRc4c6OKqbHIqQB3tp9o4PnX2m9KIa6z7sjzys
 jett2ZjMe7BtctBluZF0zVyCbRdAXgfxp7QGfv/CkN+hw4uztwFwen4LpwvJseLd
 gkie/lVPFKszyaWfiF3pDPazk5qhc53ChjAhnSkRY8HlwFcVtZwO7Ptvex0l8gO2
 t+ZxhX9zt3jxRbiHq5h/N6EDw2pPthvSR4iT4FcyYiwqxUK64Nq5RQpkxJTfu0iz
 l2mxMTNol/tDKH+iOvWJX565LzVXxonCf8Cne4mooqegkn0f2bnkPqoE5N8OwTdd
 oIGT/Vq84C5eQwPubtr2oXr6Xh7pywbPW8h7fn972QWl5ySbR4JEmdBzSviF5ALq
 Dwz8lJeGX6qYpSKz8aVqKYJ3U31hYxT/EPhGIJ4VtjcTxyfgcobaD26W0vT0Cjad
 dIdK11IDMxErquS1Vb/kkTzVxCnVhmWRsjmUeKLl/FxDkhiJmjIxaCOvtitzsiHz
 tooMpcCQ7Z97QbDxKfolpcCC563okYhUoca3EhZLq9pZkEwfbGN9YI4/i608oSaA
 K4mJgdL6c704TqGwouIBn/+MTWq4LOkzN2zUP0kpY2z61GvEPMYxmdoQBn2yHBb9
 cnt9MZNlZML2YqnMjiDf
 =j1Um
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-4.13-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest updates from Shuah Khan:
 "This update consists of:

   - TAP13 framework and changes to some tests to convert to TAP13.
     Converting kselftest output to standard format will help identify
     run to run differences and pin point failures easily. TAP13 format
     has been in use for several years and the output is human friendly.

     Please find the specification:
       https://testanything.org/tap-version-13-specification.html

     Credit goes to Tim Bird for recommending TAP13 as a suitable
     format, and to Grag KH for kick starting the work with help from
     Paul Elder and Alice Ferrazzi

     The first phase of the TAp13 conversion is included in this update.
     Future updates will include updates to rest of the tests.

   - Masami Hiramatsu fixed ftrace to run on 4.9 stable kernels.

   - Kselftest documnetation has been converted to ReST format. Document
     now has a new home under Documentation/dev-tools.

   - kselftest_harness.h is now available for general use as a result of
     Mickaël Salaün's work.

   - Several fixes to skip and/or fail tests gracefully on older
     releases"

* tag 'linux-kselftest-4.13-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (48 commits)
  selftests: membarrier: use ksft_* var arg msg api
  selftests: breakpoints: breakpoint_test_arm64: convert test to use TAP13
  selftests: breakpoints: step_after_suspend_test use ksft_* var arg msg api
  selftests: breakpoint_test: use ksft_* var arg msg api
  kselftest: add ksft_print_msg() function to output general information
  kselftest: make ksft_* output functions variadic
  selftests/capabilities: Fix the test_execve test
  selftests: intel_pstate: add .gitignore
  selftests: fix memory-hotplug test
  selftests: add missing test name in memory-hotplug test
  selftests: check percentage range for memory-hotplug test
  selftests: check hot-pluggagble memory for memory-hotplug test
  selftests: typo correction for memory-hotplug test
  selftests: ftrace: Use md5sum to take less time of checking logs
  tools/testing/selftests/sysctl: Add pre-check to the value of writes_strict
  kselftest.rst: do some adjustments after ReST conversion
  selftest/net/Makefile: Specify output with $(OUTPUT)
  selftest/intel_pstate/aperf: Use LDLIBS instead of LDFLAGS
  selftest/memfd/Makefile: Fix build error
  selftests: lib: Skip tests on missing test modules
  ...
2017-07-07 14:04:47 -07:00
Linus Torvalds
d691b7e7d1 powerpc updates for 4.13
Highlights include:
 
  - Support for STRICT_KERNEL_RWX on 64-bit server CPUs.
 
  - Platform support for FSP2 (476fpe) board
 
  - Enable ZONE_DEVICE on 64-bit server CPUs.
 
  - Generic & powerpc spin loop primitives to optimise busy waiting
 
  - Convert VDSO update function to use new update_vsyscall() interface
 
  - Optimisations to hypercall/syscall/context-switch paths
 
  - Improvements to the CPU idle code on Power8 and Power9.
 
 As well as many other fixes and improvements.
 
 Thanks to:
   Akshay Adiga, Andrew Donnellan, Andrew Jeffery, Anshuman Khandual, Anton
   Blanchard, Balbir Singh, Benjamin Herrenschmidt, Christophe Leroy, Christophe
   Lombard, Colin Ian King, Dan Carpenter, Gautham R. Shenoy, Hari Bathini, Ian
   Munsie, Ivan Mikhaylov, Javier Martinez Canillas, Madhavan Srinivasan,
   Masahiro Yamada, Matt Brown, Michael Neuling, Michal Suchanek, Murilo
   Opsfelder Araujo, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul
   Mackerras, Pavel Machek, Russell Currey, Santosh Sivaraj, Stephen Rothwell,
   Thiago Jung Bauermann, Yang Li.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZXyPCAAoJEFHr6jzI4aWAI9QQAISf2x5y//cqCi4ISyQB5pTq
 KLS/yQajNkQOw7c0fzBZOaH5Xd/SJ6AcKWDg8yDlpDR3+sRRsr98iIRECgKS5I7/
 DxD9ywcbSoMXFQQo1ZMCp5CeuMUIJRtugBnUQM+JXCSUCPbznCY5DchDTLyTBTpO
 MeMVhI//JxthhoOMA9MudiEGaYCU9ho442Z4OJUSiLUv8WRbvQX9pTqoc4vx1fxA
 BWf2mflztBVcIfKIyxIIIlDLukkMzix6gSYPMCbC7lzkbnU7JSqKiheJXjo1gJS2
 ePHKDxeNR2/QP0g/j3aT/MR1uTt9MaNBSX3gANE1xQ9OoJ8m1sOtCO4gNbSdLWae
 eXhDnoiEp930DRZOeEioOItuWWoxFaMyYk3BMmRKV4QNdYL3y3TRVeL2/XmRGqYL
 Lxz4IY/x5TteFEJNGcRX90uizNSi8AaEXPF16pUk8Ctt6eH3ZSwPMv2fHeYVCMr0
 KFlKHyaPEKEoztyzLcUR6u9QB56yxDN58bvLpd32AeHvKhqyxFoySy59x9bZbatn
 B2y8mmDItg860e0tIG6jrtplpOVvL8i5jla5RWFVoQDuxxrLAds3vG9JZQs+eRzx
 Fiic93bqeUAS6RzhXbJ6QQJYIyhE7yqpcgv7ME1W87SPef3HPBk9xlp3yIDwdA2z
 bBDvrRnvupusz8qCWrxe
 =w8rj
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:
 "Highlights include:

   - Support for STRICT_KERNEL_RWX on 64-bit server CPUs.

   - Platform support for FSP2 (476fpe) board

   - Enable ZONE_DEVICE on 64-bit server CPUs.

   - Generic & powerpc spin loop primitives to optimise busy waiting

   - Convert VDSO update function to use new update_vsyscall() interface

   - Optimisations to hypercall/syscall/context-switch paths

   - Improvements to the CPU idle code on Power8 and Power9.

  As well as many other fixes and improvements.

  Thanks to: Akshay Adiga, Andrew Donnellan, Andrew Jeffery, Anshuman
  Khandual, Anton Blanchard, Balbir Singh, Benjamin Herrenschmidt,
  Christophe Leroy, Christophe Lombard, Colin Ian King, Dan Carpenter,
  Gautham R. Shenoy, Hari Bathini, Ian Munsie, Ivan Mikhaylov, Javier
  Martinez Canillas, Madhavan Srinivasan, Masahiro Yamada, Matt Brown,
  Michael Neuling, Michal Suchanek, Murilo Opsfelder Araujo, Naveen N.
  Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pavel Machek,
  Russell Currey, Santosh Sivaraj, Stephen Rothwell, Thiago Jung
  Bauermann, Yang Li"

* tag 'powerpc-4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits)
  powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs
  powerpc/mm/radix: Implement STRICT_RWX/mark_rodata_ro() for Radix
  powerpc/mm/hash: Implement mark_rodata_ro() for hash
  powerpc/vmlinux.lds: Align __init_begin to 16M
  powerpc/lib/code-patching: Use alternate map for patch_instruction()
  powerpc/xmon: Add patch_instruction() support for xmon
  powerpc/kprobes/optprobes: Use patch_instruction()
  powerpc/kprobes: Move kprobes over to patch_instruction()
  powerpc/mm/radix: Fix execute permissions for interrupt_vectors
  powerpc/pseries: Fix passing of pp0 in updatepp() and updateboltedpp()
  powerpc/64s: Blacklist rtas entry/exit from kprobes
  powerpc/64s: Blacklist functions invoked on a trap
  powerpc/64s: Un-blacklist system_call() from kprobes
  powerpc/64s: Move system_call() symbol to just after setting MSR_EE
  powerpc/64s: Blacklist system_call() and system_call_common() from kprobes
  powerpc/64s: Convert .L__replay_interrupt_return to a local label
  powerpc64/elfv1: Only dereference function descriptor for non-text symbols
  cxl: Export library to support IBM XSL
  powerpc/dts: Use #include "..." to include local DT
  powerpc/perf/hv-24x7: Aggregate result elements on POWER9 SMT8
  ...
2017-07-07 13:55:45 -07:00
Linus Torvalds
b6ffe9ba46 libnvdimm for 4.13
* Introduce the _flushcache() family of memory copy helpers and use them
   for persistent memory write operations on x86. The _flushcache()
   semantic indicates that the cache is either bypassed for the copy
   operation (movnt) or any lines dirtied by the copy operation are
   written back (clwb, clflushopt, or clflush).
 
 * Extend dax_operations with ->copy_from_iter() and ->flush()
   operations. These operations and other infrastructure updates allow
   all persistent memory specific dax functionality to be pushed into
   libnvdimm and the pmem driver directly. It also allows dax-specific
   sysfs attributes to be linked to a host device, for example:
       /sys/block/pmem0/dax/write_cache
 
 * Add support for the new NVDIMM platform/firmware mechanisms introduced
   in ACPI 6.2 and UEFI 2.7. This support includes the v1.2 namespace
   label format, extensions to the address-range-scrub command set, new
   error injection commands, and a new BTT (block-translation-table)
   layout. These updates support inter-OS and pre-OS compatibility.
 
 * Fix a longstanding memory corruption bug in nfit_test.
 
 * Make the pmem and nvdimm-region 'badblocks' sysfs files poll(2)
   capable.
 
 * Miscellaneous fixes and small updates across libnvdimm and the nfit
   driver.
 
 Acknowledgements that came after the branch was pushed:
 
 commit 6aa734a2f3 "libnvdimm, region, pmem: fix 'badblocks'
   sysfs_get_dirent() reference lifetime"
 Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZXsUtAAoJEB7SkWpmfYgCOXcP/06bncqTEvtgrOF2b7O8w+8e
 mTySD51RUn6UpkFd37SMRch+rmbojuqj465TAE7XIXgyLgIOJixKaTlHYUoEnP3X
 rC4Q/g5mN0nittMDwL+vQaa1lQWd2kbjOlrqCgnLHVEEJpHmiQussunjvir4G1U7
 5ROooP8W+qMK5y5XPLJAg/gyGhYkjpRSlDg3Eo5meZZ0IdURbI7+WCLKrPcQUERT
 WmDc9gLhJdSQVxBV/0m2gdAER4ADmFjcrlm8kjXRBhdlUmEFjM0zpvlHJutHTkks
 rNZWCmCJs0Sas+DmRKszFmvVFHRHqUVA3dWK4P6PJEX+tl7BwlPcxpbfacHTG2EZ
 btArFc584DZ+EIrim1cXXRvLFlxnKOFBtBeteFs7l2kZjEcN6S4I5OZgTyeDpe/i
 2WDpHWLQWibkcIzH9y1EuMBkYnQjTJl1pecHzJoTaC+jAQ+opLiY7EecjLmCmQS6
 MBYUeQZNufLGfT5b8KXfpKeiXhpFkYrAGp+ErfoH/6RKy2zqTdagN1yVhos2y+a7
 JJu/Weetpn8qv+KTGUShO8TGyWv3wU46YkG2rKWl0FL1+C+6LMMw1/L0A97lwVlg
 BpypVVyaNu1D22ifZ8O5wbqPIYghoZ5akA0CiduhX19cpl5rTeTd8EvLjvcYhZEZ
 pMHuMAqIcIyLhIe2/sRF
 =xKQB
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dan Williams:
 "libnvdimm updates for the latest ACPI and UEFI specifications. This
  pull request also includes new 'struct dax_operations' enabling to
  undo the abuse of copy_user_nocache() for copy operations to pmem.

  The dax work originally missed 4.12 to address concerns raised by Al.

  Summary:

   - Introduce the _flushcache() family of memory copy helpers and use
     them for persistent memory write operations on x86. The
     _flushcache() semantic indicates that the cache is either bypassed
     for the copy operation (movnt) or any lines dirtied by the copy
     operation are written back (clwb, clflushopt, or clflush).

   - Extend dax_operations with ->copy_from_iter() and ->flush()
     operations. These operations and other infrastructure updates allow
     all persistent memory specific dax functionality to be pushed into
     libnvdimm and the pmem driver directly. It also allows dax-specific
     sysfs attributes to be linked to a host device, for example:
     /sys/block/pmem0/dax/write_cache

   - Add support for the new NVDIMM platform/firmware mechanisms
     introduced in ACPI 6.2 and UEFI 2.7. This support includes the v1.2
     namespace label format, extensions to the address-range-scrub
     command set, new error injection commands, and a new BTT
     (block-translation-table) layout. These updates support inter-OS
     and pre-OS compatibility.

   - Fix a longstanding memory corruption bug in nfit_test.

   - Make the pmem and nvdimm-region 'badblocks' sysfs files poll(2)
     capable.

   - Miscellaneous fixes and small updates across libnvdimm and the nfit
     driver.

  Acknowledgements that came after the branch was pushed: commit
  6aa734a2f3 ("libnvdimm, region, pmem: fix 'badblocks'
  sysfs_get_dirent() reference lifetime") was reviewed by Toshi Kani
  <toshi.kani@hpe.com>"

* tag 'libnvdimm-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (42 commits)
  libnvdimm, namespace: record 'lbasize' for pmem namespaces
  acpi/nfit: Issue Start ARS to retrieve existing records
  libnvdimm: New ACPI 6.2 DSM functions
  acpi, nfit: Show bus_dsm_mask in sysfs
  libnvdimm, acpi, nfit: Add bus level dsm mask for pass thru.
  acpi, nfit: Enable DSM pass thru for root functions.
  libnvdimm: passthru functions clear to send
  libnvdimm, btt: convert some info messages to warn/err
  libnvdimm, region, pmem: fix 'badblocks' sysfs_get_dirent() reference lifetime
  libnvdimm: fix the clear-error check in nsio_rw_bytes
  libnvdimm, btt: fix btt_rw_page not returning errors
  acpi, nfit: quiet invalid block-aperture-region warnings
  libnvdimm, btt: BTT updates for UEFI 2.7 format
  acpi, nfit: constify *_attribute_group
  libnvdimm, pmem: disable dax flushing when pmem is fronting a volatile region
  libnvdimm, pmem, dax: export a cache control attribute
  dax: convert to bitmask for flags
  dax: remove default copy_from_iter fallback
  libnvdimm, nfit: enable support for volatile ranges
  libnvdimm, pmem: fix persistence warning
  ...
2017-07-07 09:44:06 -07:00
Linus Torvalds
c136b84393 PPC:
- Better machine check handling for HV KVM
 - Ability to support guests with threads=2, 4 or 8 on POWER9
 - Fix for a race that could cause delayed recognition of signals
 - Fix for a bug where POWER9 guests could sleep with interrupts pending.
 
 ARM:
 - VCPU request overhaul
 - allow timer and PMU to have their interrupt number selected from userspace
 - workaround for Cavium erratum 30115
 - handling of memory poisonning
 - the usual crop of fixes and cleanups
 
 s390:
 - initial machine check forwarding
 - migration support for the CMMA page hinting information
 - cleanups and fixes
 
 x86:
 - nested VMX bugfixes and improvements
 - more reliable NMI window detection on AMD
 - APIC timer optimizations
 
 Generic:
 - VCPU request overhaul + documentation of common code patterns
 - kvm_stat improvements
 
 There is a small conflict in arch/s390 due to an arch-wide field rename.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJZW4XTAAoJEL/70l94x66DkhMH/izpk54KI17PtyQ9VYI2sYeZ
 BWK6Kl886g3ij4pFi3pECqjDJzWaa3ai+vFfzzpJJ8OkCJT5Rv4LxC5ERltVVmR8
 A3T1I/MRktSC0VJLv34daPC2z4Lco/6SPipUpPnL4bE2HATKed4vzoOjQ3tOeGTy
 dwi7TFjKwoVDiM7kPPDRnTHqCe5G5n13sZ49dBe9WeJ7ttJauWqoxhlYosCGNPEj
 g8ZX8+cvcAhVnz5uFL8roqZ8ygNEQq2mgkU18W8ZZKuiuwR0gdsG0gSBFNTdwIMK
 NoreRKMrw0+oLXTIB8SZsoieU6Qi7w3xMAMabe8AJsvYtoersugbOmdxGCr1lsA=
 =OD7H
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "PPC:
   - Better machine check handling for HV KVM
   - Ability to support guests with threads=2, 4 or 8 on POWER9
   - Fix for a race that could cause delayed recognition of signals
   - Fix for a bug where POWER9 guests could sleep with interrupts pending.

  ARM:
   - VCPU request overhaul
   - allow timer and PMU to have their interrupt number selected from userspace
   - workaround for Cavium erratum 30115
   - handling of memory poisonning
   - the usual crop of fixes and cleanups

  s390:
   - initial machine check forwarding
   - migration support for the CMMA page hinting information
   - cleanups and fixes

  x86:
   - nested VMX bugfixes and improvements
   - more reliable NMI window detection on AMD
   - APIC timer optimizations

  Generic:
   - VCPU request overhaul + documentation of common code patterns
   - kvm_stat improvements"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (124 commits)
  Update my email address
  kvm: vmx: allow host to access guest MSR_IA32_BNDCFGS
  x86: kvm: mmu: use ept a/d in vmcs02 iff used in vmcs12
  kvm: x86: mmu: allow A/D bits to be disabled in an mmu
  x86: kvm: mmu: make spte mmio mask more explicit
  x86: kvm: mmu: dead code thanks to access tracking
  KVM: PPC: Book3S: Fix typo in XICS-on-XIVE state saving code
  KVM: PPC: Book3S HV: Close race with testing for signals on guest entry
  KVM: PPC: Book3S HV: Simplify dynamic micro-threading code
  KVM: x86: remove ignored type attribute
  KVM: LAPIC: Fix lapic timer injection delay
  KVM: lapic: reorganize restart_apic_timer
  KVM: lapic: reorganize start_hv_timer
  kvm: nVMX: Check memory operand to INVVPID
  KVM: s390: Inject machine check into the nested guest
  KVM: s390: Inject machine check into the guest
  tools/kvm_stat: add new interactive command 'b'
  tools/kvm_stat: add new command line switch '-i'
  tools/kvm_stat: fix error on interactive command 'g'
  KVM: SVM: suppress unnecessary NMI singlestep on GIF=0 and nested exit
  ...
2017-07-06 18:38:31 -07:00
Allen Hubbe
7c49c9855a NTB: ntb_test: add parameter for doorbell bitmask
If the test attempts to clear doorbell bits that are invalid for the
hardware, then the test will fail.  Provide a parameter to specify the
doorbell bits to clear.  Set default doorbell bits that work for XEON.

Signed-off-by: Allen Hubbe <Allen.Hubbe@dell.com>
Acked-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-07-06 11:30:06 -04:00
Allen Hubbe
c2d42edb52 NTB: ntb_test: modprobe on remote host
Signed-off-by: Allen Hubbe <Allen.Hubbe@dell.com>
Acked-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
2017-07-06 11:30:06 -04:00
Linus Torvalds
5518b69b76 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Reasonably busy this cycle, but perhaps not as busy as in the 4.12
  merge window:

   1) Several optimizations for UDP processing under high load from
      Paolo Abeni.

   2) Support pacing internally in TCP when using the sch_fq packet
      scheduler for this is not practical. From Eric Dumazet.

   3) Support mutliple filter chains per qdisc, from Jiri Pirko.

   4) Move to 1ms TCP timestamp clock, from Eric Dumazet.

   5) Add batch dequeueing to vhost_net, from Jason Wang.

   6) Flesh out more completely SCTP checksum offload support, from
      Davide Caratti.

   7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
      Neira Ayuso, and Matthias Schiffer.

   8) Add devlink support to nfp driver, from Simon Horman.

   9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
      Prabhu.

  10) Add stack depth tracking to BPF verifier and use this information
      in the various eBPF JITs. From Alexei Starovoitov.

  11) Support XDP on qed device VFs, from Yuval Mintz.

  12) Introduce BPF PROG ID for better introspection of installed BPF
      programs. From Martin KaFai Lau.

  13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.

  14) For loads, allow narrower accesses in bpf verifier checking, from
      Yonghong Song.

  15) Support MIPS in the BPF selftests and samples infrastructure, the
      MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
      Daney.

  16) Support kernel based TLS, from Dave Watson and others.

  17) Remove completely DST garbage collection, from Wei Wang.

  18) Allow installing TCP MD5 rules using prefixes, from Ivan
      Delalande.

  19) Add XDP support to Intel i40e driver, from Björn Töpel

  20) Add support for TC flower offload in nfp driver, from Simon
      Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
      Kicinski, and Bert van Leeuwen.

  21) IPSEC offloading support in mlx5, from Ilan Tayari.

  22) Add HW PTP support to macb driver, from Rafal Ozieblo.

  23) Networking refcount_t conversions, From Elena Reshetova.

  24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
      for tuning the TCP sockopt settings of a group of applications,
      currently via CGROUPs"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
  net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
  dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
  cxgb4: Support for get_ts_info ethtool method
  cxgb4: Add PTP Hardware Clock (PHC) support
  cxgb4: time stamping interface for PTP
  nfp: default to chained metadata prepend format
  nfp: remove legacy MAC address lookup
  nfp: improve order of interfaces in breakout mode
  net: macb: remove extraneous return when MACB_EXT_DESC is defined
  bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
  bpf: fix return in load_bpf_file
  mpls: fix rtm policy in mpls_getroute
  net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
  net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
  net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
  net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
  ...
2017-07-05 12:31:59 -07:00
Linus Torvalds
e24dd9ee53 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security layer updates from James Morris:

 - a major update for AppArmor. From JJ:

     * several bug fixes and cleanups

     * the patch to add symlink support to securityfs that was floated
       on the list earlier and the apparmorfs changes that make use of
       securityfs symlinks

     * it introduces the domain labeling base code that Ubuntu has been
       carrying for several years, with several cleanups applied. And it
       converts the current mediation over to using the domain labeling
       base, which brings domain stacking support with it. This finally
       will bring the base upstream code in line with Ubuntu and provide
       a base to upstream the new feature work that Ubuntu carries.

     * This does _not_ contain any of the newer apparmor mediation
       features/controls (mount, signals, network, keys, ...) that
       Ubuntu is currently carrying, all of which will be RFC'd on top
       of this.

 - Notable also is the Infiniband work in SELinux, and the new file:map
   permission. From Paul:

      "While we're down to 21 patches for v4.13 (it was 31 for v4.12),
       the diffstat jumps up tremendously with over 2k of line changes.

       Almost all of these changes are the SELinux/IB work done by
       Daniel Jurgens; some other noteworthy changes include a NFS v4.2
       labeling fix, a new file:map permission, and reporting of policy
       capabilities on policy load"

   There's also now genfscon labeling support for tracefs, which was
   lost in v4.1 with the separation from debugfs.

 - Smack incorporates a safer socket check in file_receive, and adds a
   cap_capable call in privilege check.

 - TPM as usual has a bunch of fixes and enhancements.

 - Multiple calls to security_add_hooks() can now be made for the same
   LSM, to allow LSMs to have hook declarations across multiple files.

 - IMA now supports different "ima_appraise=" modes (eg. log, fix) from
   the boot command line.

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (126 commits)
  apparmor: put back designators in struct initialisers
  seccomp: Switch from atomic_t to recount_t
  seccomp: Adjust selftests to avoid double-join
  seccomp: Clean up core dump logic
  IMA: update IMA policy documentation to include pcr= option
  ima: Log the same audit cause whenever a file has no signature
  ima: Simplify policy_func_show.
  integrity: Small code improvements
  ima: fix get_binary_runtime_size()
  ima: use ima_parse_buf() to parse template data
  ima: use ima_parse_buf() to parse measurements headers
  ima: introduce ima_parse_buf()
  ima: Add cgroups2 to the defaults list
  ima: use memdup_user_nul
  ima: fix up #endif comments
  IMA: Correct Kconfig dependencies for hash selection
  ima: define is_ima_appraise_enabled()
  ima: define Kconfig IMA_APPRAISE_BOOTPARAM option
  ima: define a set of appraisal rules requiring file signatures
  ima: extend the "ima_policy" boot command line to support multiple policies
  ...
2017-07-05 11:26:35 -07:00
Ingo Molnar
524b62fdbe perf/urgent fixes:
User visible:
 
 - Fix max attr.precise_ip probing to make perf use the best cycles:p
   available in the processor for non root users (Arnaldo Carvalho de Melo)
 
 - Fix processing of MMAP events for 32-bit binaries on 64-bit systems
   when unwind support is not fully integrated, fixing DSO and symbol
   resolution (Jiri Olsa)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJZW+uQAAoJENZQFvNTUqpARHYP/jzthQY9jH6BtLwntItNc8EY
 7zweMpPbdRxXqILfkeEpGiGsH13j8+ZdUlg7Q07yuS2hSJJLYn3WPLb5kfVjDmKP
 IeSkJSsGi448RCWr9yQiOIeVbU07vCb3fdcDK6E485n5gU6jjlfvVF9odt1Yg+PY
 jNs6XSZDbi5GGMA2CpqHYFjRCQbst7ucF6MLlEF3CK6qY9TtiM1UrWwEoJgiKoab
 rnwP9pe2om1KKbBaKE8jSS42yw1KJkvrE6To3cD0HwrnWBufWDZmwrF4Ba5UsClK
 2q3uMJMOMzFOZaWAw1NkW5JfSb0iBxOMnFZXgng+zKsubHlkAkY7j+GhgV6ndSXX
 viuBR6fFhC37xwHSzgw2z0LIwj8VMmsppZWrgB+El9PUiRJ3qIkooXVPaSV+Eet4
 4XfIg4m1L1hlzp5OskV4H6Rh5cqp2g0mmr0iDMSJZVfMC4sCNBSQOT7l7Sks0EWV
 4MeLdFcwIXFYjecu/MZ3H+EI2OIi4/KmuPgwyQmVW09tI00qXIQGFHnq9Q4InneU
 jAwBxn2qNerXM2DS0Zw55rUWakjYQH2wq6MXFPTmyZXlibiFpbBhQjE9SyafoURN
 bC2ago2QXny12WZEwPp3PAYJb6VWhL3W/z00vyawdso1iQJU2QLU4N54+qPq/iXn
 4ng+dI3ZeaZQXAT8X6KS
 =VehJ
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-for-mingo-4.12-20170704' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

User visible changes:

 - Fix max attr.precise_ip probing to make perf use the best cycles:p
   available in the processor for non root users (Arnaldo Carvalho de Melo)

 - Fix processing of MMAP events for 32-bit binaries on 64-bit systems
   when unwind support is not fully integrated, fixing DSO and symbol
   resolution (Jiri Olsa)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-05 09:10:37 +02:00
Linus Torvalds
eceeae414e ACPI updates for v4.13-rc1
- Update the ACPICA code in the kernel to upstream revision
    revision 20170531 (which covers all of the new material from
    ACPI 6.2) including:
    * Support for the PinFunction(), PinConfig(), PinGroup(),
      PinGroupFunction(), and PinGroupConfig() resource descriptors
      (Mika Westerberg).
    * Support for new subtables in HEST and SRAT, new notify value
      for HEST, header support for TPM2 table changes, and BGRT
      Status field update (Bob Moore).
    * Support for new PCCT subtables (David Box).
    * Support for _LSI, _LSR, _LSW, and _HMA as predefined methods
      (Erik Schmauss).
    * Support for the new WSMT, HMAT, and PPTT tables (Lv Zheng).
    * New UUID values for Processor Properties (Bob Moore).
    * New notify values for memory attributes and graceful shutdown
      (Bob Moore).
    * Fix related to the PCAT_COMPAT MADT flag (Janosch Hildebrand).
    * Resource to AML conversion fix for resources containing GPIOs
      (Mika Westerberg).
    * Disassembler-related updates (Bob Moore, David Box, Erik
      Schmauss).
    * Assorted fixes and cleanups (Bob Moore, Erik Schmauss, Lv Zheng,
      Cao Jin).
 
  - Modify ACPICA to always use designated initializers for function
    pointer structures to make the structure layout randomization GCC
    plugin work with it (Kees Cook).
 
  - Update the tables configfs interface to unload SSDTs on configfs
    entry removal (Jan Kiszka).
 
  - Add support for the GPI1 regulator to the xpower PMIC Operation
    Region handler (Hans de Goede).
 
  - Fix ACPI EC issues related to conflicting EC definitions in the
    ECDT and in the ACPI namespace (Lv Zheng, Carlo Caione, Chris
    Chiu).
 
  - Fix an interrupt storm issue in the EC driver and make its debug
    output work with dynamic debug as expected (Lv Zheng).
 
  - Add ACPI backlight quirk for Dell Precision 7510 (Shih-Yuan Lee).
 
  - Fix whitespace in pr_fmt() to align log entries properly in some
    places in the ACPI subsystem (Vincent Legoll).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJZWrJyAAoJEILEb/54YlRxY2cP/1h2un46sEnP7uLVLK4lpEih
 NQ79+fA7NTidA9J6gin2Kjgl8BFgswAhQBJZG3cJxUrhIIRWItSeLGvHb0CXX+iY
 m7CpL0ralIKV9XCju8B5b2V+0qn2tPzHS5a8PSX9Gvs0N6G8Qnlq4jspIjXMa3zH
 3D/fmYbQZeuHjypiBqRlB5IE49O2FQL2+d4Vn1rryuAFFya610ulASOZxsQ015d4
 Xt2pSTqUbqeD8rG8+j4VKFy8x0Lj0eEU3FUgYNJHlO+pOG+wTTs3KPyNOa33h0OC
 US0Wc0XOUyz78P5YkEgA7Ve/j1E6bqQ9bVF6mIcqjvAOReqSe84RCJ86Ckjlewxf
 VMNjCT/qDDkB8d+IAX6e7uYwxuP8bTSfUGBHjoI16qaJ13zd1/jOVY8QH5zPg5Ml
 r06HO5iOrQS3yhumYRk3gIdV+cgdHt3SEQlfi30nFH5Yzp8epk85UPyjYUYPDwqy
 QP5QbYvmHyuIUSXW2HQxZYADSaqnKIglRizCIKcFHT5+J554DjM5T51A5UpyQkY3
 cjtgrpg4KA5qCrpUAqPPxA2mtUVsZk1h4HwhrkTVt4xaR9GP9gvvzonP552fmHrM
 nIX9tM2JEf+LC7eCV+yrk8dtGNTRYpmEBQw7go4R82pTE5YTOWDf1bNM59gTFoWP
 LXi28C9lb2aibWlX/0bw
 =ImFw
 -----END PGP SIGNATURE-----

Merge tag 'acpi-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These mostly update the ACPICA code in the kernel to upstream revision
  20170531 which covers all of the new material from ACPI 6.2, including
  new tables (WSMT, HMAT, PPTT), new subtables and definition changes
  for some existing tables (BGRT, HEST, SRAT, TPM2, PCCT), new resource
  descriptor macros for pin control, support for new predefined methods
  (_LSI, _LSR, _LSW, _HMA), fixes and cleanups.

  On top of that, an additional ACPICA change from Kees (which also is
  upstream already) switches all of the definitions of function pointer
  structures in ACPICA to use designated initializers so as to make the
  structure layout randomization GCC plugin work with it.

  The rest is a few fixes and cleanups in the EC driver, an xpower PMIC
  driver update, a new backlight blacklist entry, and update of the
  tables configfs interface and a messages formatting cleanup.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision revision
     20170531 (which covers all of the new material from ACPI 6.2)
     including:
      * Support for the PinFunction(), PinConfig(), PinGroup(),
        PinGroupFunction(), and PinGroupConfig() resource descriptors
        (Mika Westerberg).
      * Support for new subtables in HEST and SRAT, new notify value for
        HEST, header support for TPM2 table changes, and BGRT Status
        field update (Bob Moore).
      * Support for new PCCT subtables (David Box).
      * Support for _LSI, _LSR, _LSW, and _HMA as predefined methods
        (Erik Schmauss).
      * Support for the new WSMT, HMAT, and PPTT tables (Lv Zheng).
      * New UUID values for Processor Properties (Bob Moore).
      * New notify values for memory attributes and graceful shutdown
        (Bob Moore).
      * Fix related to the PCAT_COMPAT MADT flag (Janosch Hildebrand).
      * Resource to AML conversion fix for resources containing GPIOs
        (Mika Westerberg).
      * Disassembler-related updates (Bob Moore, David Box, Erik
        Schmauss).
      * Assorted fixes and cleanups (Bob Moore, Erik Schmauss, Lv Zheng,
        Cao Jin).

   - Modify ACPICA to always use designated initializers for function
     pointer structures to make the structure layout randomization GCC
     plugin work with it (Kees Cook).

   - Update the tables configfs interface to unload SSDTs on configfs
     entry removal (Jan Kiszka).

   - Add support for the GPI1 regulator to the xpower PMIC Operation
     Region handler (Hans de Goede).

   - Fix ACPI EC issues related to conflicting EC definitions in the
     ECDT and in the ACPI namespace (Lv Zheng, Carlo Caione, Chris
     Chiu).

   - Fix an interrupt storm issue in the EC driver and make its debug
     output work with dynamic debug as expected (Lv Zheng).

   - Add ACPI backlight quirk for Dell Precision 7510 (Shih-Yuan Lee).

   - Fix whitespace in pr_fmt() to align log entries properly in some
     places in the ACPI subsystem (Vincent Legoll)"

* tag 'acpi-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (63 commits)
  ACPI / EC: Add quirk for GL720VMK
  ACPI / EC: Fix media keys not working problem on some Asus laptops
  ACPI / EC: Add support to skip boot stage DSDT probe
  ACPI / EC: Enhance boot EC sanity check
  ACPI / video: Add quirks for the Dell Precision 7510
  ACPI: EC: Fix EC command visibility for dynamic debug
  ACPI: EC: Fix an EC event IRQ storming issue
  ACPICA: Use designated initializers
  ACPICA: Update version to 20170531
  ACPICA: Update a couple of debug output messages
  ACPICA: acpiexec: enhance local signal handler
  ACPICA: Simplify output for the ACPI Debug Object
  ACPICA: Unix application OSL: Correctly handle control-c (EINTR)
  ACPICA: Improvements for debug output only
  ACPICA: Disassembler: allow conflicting external declarations to be emitted.
  ACPICA: Disassembler: add external op to namespace on first pass
  ACPICA: Disassembler: prevent external op's from opening a new scope
  ACPICA: Changed Gbl_disasm_flag to acpi_gbl_disasm_flag
  ACPICA: Changing External to a named object
  ACPICA: Update two error messages to emit control method name
  ...
2017-07-04 14:16:49 -07:00
Linus Torvalds
408c9861c6 Power management updates for v4.13-rc1
- Rework suspend-to-idle to allow it to take wakeup events signaled
    by the EC into account on ACPI-based platforms in order to properly
    support power button wakeup from suspend-to-idle on recent Dell
    laptops (Rafael Wysocki).
 
    That includes the core suspend-to-idle code rework, support for
    the Low Power S0 _DSM interface, and support for the ACPI INT0002
    Virtual GPIO device from Hans de Goede (required for USB keyboard
    wakeup from suspend-to-idle to work on some machines).
 
  - Stop trying to export the current CPU frequency via /proc/cpuinfo
    on x86 as that is inaccurate and confusing (Len Brown).
 
  - Rework the way in which the current CPU frequency is exported by
    the kernel (over the cpufreq sysfs interface) on x86 systems with
    the APERF and MPERF registers by always using values read from
    these registers, when available, to compute the current frequency
    regardless of which cpufreq driver is in use (Len Brown).
 
  - Rework the PCI/ACPI device wakeup infrastructure to remove the
    questionable and artificial distinction between "devices that
    can wake up the system from sleep states" and "devices that can
    generate wakeup signals in the working state" from it, which
    allows the code to be simplified quite a bit (Rafael Wysocki).
 
  - Fix the wakeup IRQ framework by making it use SRCU instead of
    RCU which doesn't allow sleeping in the read-side critical
    sections, but which in turn is expected to be allowed by the
    IRQ bus locking infrastructure (Thomas Gleixner).
 
  - Modify some computations in the intel_pstate driver to avoid
    rounding errors resulting from them (Srinivas Pandruvada).
 
  - Reduce the overhead of the intel_pstate driver in the HWP
    (hardware-managed P-states) mode and when the "performance"
    P-state selection algorithm is in use by making it avoid
    registering scheduler callbacks in those cases (Len Brown).
 
  - Rework the energy_performance_preference sysfs knob in
    intel_pstate by changing the values that correspond to
    different symbolic hint names used by it (Len Brown).
 
  - Make it possible to use more than one cpuidle driver at the same
    time on ARM (Daniel Lezcano).
 
  - Make it possible to prevent the cpuidle menu governor from using
    the 0 state by disabling it via sysfs (Nicholas Piggin).
 
  - Add support for FFH (Fixed Functional Hardware) MWAIT in ACPI C1
    on AMD systems (Yazen Ghannam).
 
  - Make the CPPC cpufreq driver take the lowest nonlinear performance
    information into account (Prashanth Prakash).
 
  - Add support for hi3660 to the cpufreq-dt driver, fix the
    imx6q driver and clean up the sfi, exynos5440 and intel_pstate
    drivers (Colin Ian King, Krzysztof Kozlowski, Octavian Purdila,
    Rafael Wysocki, Tao Wang).
 
  - Fix a few minor issues in the generic power domains (genpd)
    framework and clean it up somewhat (Krzysztof Kozlowski,
    Mikko Perttunen, Viresh Kumar).
 
  - Fix a couple of minor issues in the operating performance points
    (OPP) framework and clean it up somewhat (Viresh Kumar).
 
  - Fix a CONFIG dependency in the hibernation core and clean it up
    slightly (Balbir Singh, Arvind Yadav, BaoJun Luo).
 
  - Add rk3228 support to the rockchip-io adaptive voltage scaling
    (AVS) driver (David Wu).
 
  - Fix an incorrect bit shift operation in the RAPL power capping
    driver (Adam Lessnau).
 
  - Add support for the EPP field in the HWP (hardware managed
    P-states) control register, HWP.EPP, to the x86_energy_perf_policy
    tool and update msr-index.h with HWP.EPP values (Len Brown).
 
  - Fix some minor issues in the turbostat tool (Len Brown).
 
  - Add support for AMD family 0x17 CPUs to the cpupower tool and fix
    a minor issue in it (Sherry Hurwitz).
 
  - Assorted cleanups, mostly related to the constification of some
    data structures (Arvind Yadav, Joe Perches, Kees Cook, Krzysztof
    Kozlowski).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJZWrICAAoJEILEb/54YlRxZYMQAIRhfbyDxKq+ByvSilUS8kTA
 AItwJ8FFzykhiwN75Cqabg4rAGyWma7IRs1vzU7zeC1aEQIn+bTQtvk+utZNI+g2
 ANFlDha20q/sXsP/CDMMTIAdW9tSOC0TOvFI9s2V2Y8dJZhoekO4ctx34FAfUS5d
 Ao6rwSAWCMsCXcGaTAlqTA+TEJmBG7u6Iq6hq6ngltoFwOv3mWWBVn52VVaJ7SMp
 9/IPbbLGMFAedrgEBRGCR+MME1xZZpvcZIJaTt1Mgn7Cx3cJaysIUAvqY/SsvFGq
 5FcUTcF2qpK3+AGawiAxZIjvOBsGRtIwqKinNIzYWs/NjiIdzmgVAmTeuPtTqp+5
 HFehUdtkFcnuDnLqSNzAaZUa7tw84cJkwnbVMnesx0MkG6rZ1SeL22E2Sabpcdsh
 3Yo1ThzJSxi59DhiiE92EQnNCEjmCldRy+8q5Ag035muxl6EJYvuNBMnZv/BMCUn
 ltSNOrmps1DlN+Col8ORIeNzQ1YjYzWMqKAYzSbyccm4ug/iSHx0/DuESmQ4GTlF
 YCwkmqyWiHrBwpl51jc+4a7SGlMmKRqU+MJes0CjagaaqoUAb8qeBOpzEJ0yNwjZ
 wtI41l6blE6kbMD3yqGdCfiB2S7GlPVoxa15eX1wRyLH3fLjwwrzJirEaiBS86tI
 1PzHZEOmBlh3DYC6DBKA
 =Wsph
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "The big ticket items here are the rework of suspend-to-idle in order
  to add proper support for power button wakeup from it on recent Dell
  laptops and the rework of interfaces exporting the current CPU
  frequency on x86.

  In addition to that, support for a few new pieces of hardware is
  added, the PCI/ACPI device wakeup infrastructure is simplified
  significantly and the wakeup IRQ framework is fixed to unbreak the IRQ
  bus locking infrastructure.

  Also, there are some functional improvements for intel_pstate, tools
  updates and small fixes and cleanups all over.

  Specifics:

   - Rework suspend-to-idle to allow it to take wakeup events signaled
     by the EC into account on ACPI-based platforms in order to properly
     support power button wakeup from suspend-to-idle on recent Dell
     laptops (Rafael Wysocki).

     That includes the core suspend-to-idle code rework, support for the
     Low Power S0 _DSM interface, and support for the ACPI INT0002
     Virtual GPIO device from Hans de Goede (required for USB keyboard
     wakeup from suspend-to-idle to work on some machines).

   - Stop trying to export the current CPU frequency via /proc/cpuinfo
     on x86 as that is inaccurate and confusing (Len Brown).

   - Rework the way in which the current CPU frequency is exported by
     the kernel (over the cpufreq sysfs interface) on x86 systems with
     the APERF and MPERF registers by always using values read from
     these registers, when available, to compute the current frequency
     regardless of which cpufreq driver is in use (Len Brown).

   - Rework the PCI/ACPI device wakeup infrastructure to remove the
     questionable and artificial distinction between "devices that can
     wake up the system from sleep states" and "devices that can
     generate wakeup signals in the working state" from it, which allows
     the code to be simplified quite a bit (Rafael Wysocki).

   - Fix the wakeup IRQ framework by making it use SRCU instead of RCU
     which doesn't allow sleeping in the read-side critical sections,
     but which in turn is expected to be allowed by the IRQ bus locking
     infrastructure (Thomas Gleixner).

   - Modify some computations in the intel_pstate driver to avoid
     rounding errors resulting from them (Srinivas Pandruvada).

   - Reduce the overhead of the intel_pstate driver in the HWP
     (hardware-managed P-states) mode and when the "performance" P-state
     selection algorithm is in use by making it avoid registering
     scheduler callbacks in those cases (Len Brown).

   - Rework the energy_performance_preference sysfs knob in intel_pstate
     by changing the values that correspond to different symbolic hint
     names used by it (Len Brown).

   - Make it possible to use more than one cpuidle driver at the same
     time on ARM (Daniel Lezcano).

   - Make it possible to prevent the cpuidle menu governor from using
     the 0 state by disabling it via sysfs (Nicholas Piggin).

   - Add support for FFH (Fixed Functional Hardware) MWAIT in ACPI C1 on
     AMD systems (Yazen Ghannam).

   - Make the CPPC cpufreq driver take the lowest nonlinear performance
     information into account (Prashanth Prakash).

   - Add support for hi3660 to the cpufreq-dt driver, fix the imx6q
     driver and clean up the sfi, exynos5440 and intel_pstate drivers
     (Colin Ian King, Krzysztof Kozlowski, Octavian Purdila, Rafael
     Wysocki, Tao Wang).

   - Fix a few minor issues in the generic power domains (genpd)
     framework and clean it up somewhat (Krzysztof Kozlowski, Mikko
     Perttunen, Viresh Kumar).

   - Fix a couple of minor issues in the operating performance points
     (OPP) framework and clean it up somewhat (Viresh Kumar).

   - Fix a CONFIG dependency in the hibernation core and clean it up
     slightly (Balbir Singh, Arvind Yadav, BaoJun Luo).

   - Add rk3228 support to the rockchip-io adaptive voltage scaling
     (AVS) driver (David Wu).

   - Fix an incorrect bit shift operation in the RAPL power capping
     driver (Adam Lessnau).

   - Add support for the EPP field in the HWP (hardware managed
     P-states) control register, HWP.EPP, to the x86_energy_perf_policy
     tool and update msr-index.h with HWP.EPP values (Len Brown).

   - Fix some minor issues in the turbostat tool (Len Brown).

   - Add support for AMD family 0x17 CPUs to the cpupower tool and fix a
     minor issue in it (Sherry Hurwitz).

   - Assorted cleanups, mostly related to the constification of some
     data structures (Arvind Yadav, Joe Perches, Kees Cook, Krzysztof
     Kozlowski)"

* tag 'pm-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (69 commits)
  cpufreq: Update scaling_cur_freq documentation
  cpufreq: intel_pstate: Clean up after performance governor changes
  PM: hibernate: constify attribute_group structures.
  cpuidle: menu: allow state 0 to be disabled
  intel_idle: Use more common logging style
  PM / Domains: Fix missing default_power_down_ok comment
  PM / Domains: Fix unsafe iteration over modified list of domains
  PM / Domains: Fix unsafe iteration over modified list of domain providers
  PM / Domains: Fix unsafe iteration over modified list of device links
  PM / Domains: Handle safely genpd_syscore_switch() call on non-genpd device
  PM / Domains: Call driver's noirq callbacks
  PM / core: Drop run_wake flag from struct dev_pm_info
  PCI / PM: Simplify device wakeup settings code
  PCI / PM: Drop pme_interrupt flag from struct pci_dev
  ACPI / PM: Consolidate device wakeup settings code
  ACPI / PM: Drop run_wake from struct acpi_device_wakeup_flags
  PM / QoS: constify *_attribute_group.
  PM / AVS: rockchip-io: add io selectors and supplies for rk3228
  powercap/RAPL: prevent overridding bits outside of the mask
  PM / sysfs: Constify attribute groups
  ...
2017-07-04 13:39:41 -07:00
Jiri Olsa
1934adf78e perf unwind: Do not fail due to missing unwind support
We currently fail the MMAP event processing if we don't have the MMAP
event's specific arch unwind support compiled in.

That's wrong and can lead to unresolved mmaps in report output for 32bit
binaries on 64bit server, like in this example on x86_64 server:

  $ cat ex.c
  int main(int argc, char **argv)
  {
          while (1) {}
  }
  $ gcc -o ex -m32 ex.c
  $ perf record ./ex
  ^C[ perf record: Woken up 2 times to write data ]
  [ perf record: Captured and wrote 0.371 MB perf.data (9322 samples) ]

Before:
  $ perf report --stdio

  SNIP

  # Overhead  Command  Shared Object     Symbol
  # ........  .......  ................  ......................
  #
     100.00%  ex       [unknown]         [.] 0x00000000080483de
       0.00%  ex       [unknown]         [.] 0x00000000f76dba4f
       0.00%  ex       [unknown]         [.] 0x00000000f76e4c11
       0.00%  ex       [unknown]         [.] 0x00000000f76daa30

After:
  $ perf report --stdio

  SNIP

  # Overhead  Command  Shared Object  Symbol
  # ........  .......  .............  ...............
  #
     100.00%  ex       ex             [.] main
       0.00%  ex       ld-2.24.so     [.] _dl_start
       0.00%  ex       ld-2.24.so     [.] do_lookup_x
       0.00%  ex       ld-2.24.so     [.] _start

The fix is not to fail, just warn if there's not unwind support compiled
in.

Reported-by: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170704131131.27508-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-04 11:43:58 -03:00
Arnaldo Carvalho de Melo
97365e8136 perf evsel: Set attr.exclude_kernel when probing max attr.precise_ip
We should set attr.exclude_kernel when probing for attr.precise_ip
level, otherwise !CAP_SYS_ADMIN users will not default to skidless
samples in capable hardware.

The increase in the paranoid level in commit 0161028b7c ("perf/core:
Change the default paranoia level to 2") broke this, fix it by excluding
kernel samples when probing.

Before:

  $ perf record usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.018 MB perf.data (6 samples) ]
  $ perf evlist -v
  cycles:u: sample_freq: 4000, sample_type: IP|TID|TIME|PERIOD, exclude_kernel: 1

After:

  $ perf record usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.018 MB perf.data (8 samples) ]
  $ perf evlist -v
  cycles:ppp: sample_freq: 4000, sample_type: IP|TID|TIME|PERIOD, exclude_kernel: 1, precise_ip: 3
                                                                                     ^^^^^^^^^^^^^
                                                                                     ^^^^^^^^^^^^^
                                                                                     ^^^^^^^^^^^^^
  $

To further clarify: we always set .exclude_kernel when non !CAP_SYS_ADMIN
users profile, its just on the attr.precise_ip probing that we weren't doing
so, fix it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 7f8d1ade1b ("perf tools: By default use the most precise "cycles" hw counter available")
Link: http://lkml.kernel.org/n/tip-t2qttwhbnua62o5gt75cueml@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-04 11:42:21 -03:00
Linus Torvalds
f4dd029ee0 Char/Misc patches for 4.13-rc1
Here is the "big" char/misc driver patchset for 4.13-rc1.
 
 Lots of stuff in here, a large thunderbolt update, w1 driver header
 reorg, the new mux driver subsystem, google firmware driver updates, and
 a raft of other smaller things.  Full details in the shortlog.
 
 All of these have been in linux-next for a while with the only reported
 issue being a merge problem with this tree and the jc-docs tree in the
 w1 documentation area.  The fix should be obvious for what to do when it
 happens, if not, we can send a follow-up patch for it afterward.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWVpXKA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynLrQCdG9SxRjAbOd6pT9Fr2NAzpUG84YsAoLw+I3iO
 EMi60UXWqAFJbtVMS9Aj
 =yrSq
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc updates from Greg KH:
 "Here is the "big" char/misc driver patchset for 4.13-rc1.

  Lots of stuff in here, a large thunderbolt update, w1 driver header
  reorg, the new mux driver subsystem, google firmware driver updates,
  and a raft of other smaller things. Full details in the shortlog.

  All of these have been in linux-next for a while with the only
  reported issue being a merge problem with this tree and the jc-docs
  tree in the w1 documentation area"

* tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (147 commits)
  misc: apds990x: Use sysfs_match_string() helper
  mei: drop unreachable code in mei_start
  mei: validate the message header only in first fragment.
  DocBook: w1: Update W1 file locations and names in DocBook
  mux: adg792a: always require I2C support
  nvmem: rockchip-efuse: add support for rk322x-efuse
  nvmem: core: add locking to nvmem_find_cell
  nvmem: core: Call put_device() in nvmem_unregister()
  nvmem: core: fix leaks on registration errors
  nvmem: correct Broadcom OTP controller driver writes
  w1: Add subsystem kernel public interface
  drivers/fsi: Add module license to core driver
  drivers/fsi: Use asynchronous slave mode
  drivers/fsi: Add hub master support
  drivers/fsi: Add SCOM FSI client device driver
  drivers/fsi/gpio: Add tracepoints for GPIO master
  drivers/fsi: Add GPIO based FSI master
  drivers/fsi: Document FSI master sysfs files in ABI
  drivers/fsi: Add error handling for slave
  drivers/fsi: Add tracepoints for low-level operations
  ...
2017-07-03 20:55:59 -07:00
Linus Torvalds
cbcd4f08aa Staging/IIO patches for 4.13-rc1
Here's the large set of staging and iio driver patches for 4.13-rc1.
 After over 500 patches, we removed about 200 more lines of code than we
 added, not great, but we added some new IIO drivers for unsupported
 hardware, so it's an overall win.
 
 Also here are lots of small fixes, and some tty core api additions (with
 the tty maintainer's ack) for the speakup drivers, those are finally
 getting some much needed cleanups and are looking much better now than
 before.  Full details in the shortlog.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWVpY5g8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykmRACfQOTfUq+BhL9Aw6UnZxI/cxnU1IgAnj51Nx2X
 WH4LqHdq2xo4YKOzzVVX
 =bDdB
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO updates from Greg KH:
 "Here's the large set of staging and iio driver patches for 4.13-rc1.

  After over 500 patches, we removed about 200 more lines of code than
  we added, not great, but we added some new IIO drivers for unsupported
  hardware, so it's an overall win.

  Also here are lots of small fixes, and some tty core api additions
  (with the tty maintainer's ack) for the speakup drivers, those are
  finally getting some much needed cleanups and are looking much better
  now than before. Full details in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (529 commits)
  staging: lustre: replace kmalloc with kmalloc_array
  Staging: ion: fix code style warning from NULL comparisons
  staging: fsl-mc: make dprc.h header private
  staging: fsl-mc: move mc-cmd.h contents in the public header
  staging: fsl-mc: move mc-sys.h contents in the public header
  staging: fsl-mc: fix a few implicit includes
  staging: fsl-mc: remove dpmng API files
  staging: fsl-mc: move rest of mc-bus.h to private header
  staging: fsl-mc: move couple of definitions to public header
  staging: fsl-mc: move irq domain creation prototype to public header
  staging: fsl-mc: turn several exported functions static
  staging: fsl-mc: delete prototype of unimplemented function
  staging: fsl-mc: delete duplicated function prototypes
  staging: fsl-mc: decouple the mc-bus public headers from dprc.h
  staging: fsl-mc: drop useless #includes
  staging: fsl-mc: be consistent when checking strcmp() return
  staging: fsl-mc: move comparison before strcmp() call
  staging: speakup: make function ser_to_dev static
  staging: ks7010: fix spelling mistake: "errror" -> "error"
  staging: rtl8192e: fix spelling mistake: "respose" -> "response"
  ...
2017-07-03 19:57:30 -07:00
Linus Torvalds
362f6729cb USB/PHY patches for 4.13-rc1
Here is the big patchset of USB and PHY driver updates for 4.13-rc1.
 
 On the PHY side, they decided to move files around to "make things
 easier" in their tree.  Hopefully that wasn't a mistake, but in
 linux-next testing, we haven't had any reported problems.
 
 There's the usual set of gadget and xhci and musb updates in here as
 well, along with a number of smaller updates for a raft of different USB
 drivers.  Full details in the shortlog, nothing really major.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWVpavQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymJrgCgp8Pso8bs+bnIknUSQFSguWd3wM0AnA8X3NHf
 lrdCuqw+2oxGOQrecacz
 =5L4Q
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
 "Here is the big patchset of USB and PHY driver updates for 4.13-rc1.

  On the PHY side, they decided to move files around to "make things
  easier" in their tree. Hopefully that wasn't a mistake, but in
  linux-next testing, we haven't had any reported problems.

  There's the usual set of gadget and xhci and musb updates in here as
  well, along with a number of smaller updates for a raft of different
  USB drivers. Full details in the shortlog, nothing really major.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (173 commits)
  Add USB quirk for HVR-950q to avoid intermittent device resets
  USB hub_probe: rework ugly goto-into-compound-statement
  usb: host: ohci-pxa27x: Handle return value of clk_prepare_enable
  USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick
  usbip: Fix uninitialized variable bug in vhci
  usb: core: read USB ports from DT in the usbport LED trigger driver
  dt-bindings: leds: document new trigger-sources property
  usb: typec: ucsi: Add ACPI driver
  usb: typec: Add support for UCSI interface
  usb: musb: compress return logic into one line
  USB: serial: propagate late probe errors
  USB: serial: refactor port endpoint setup
  usb: musb: tusb6010_omap: Convert to DMAengine API
  ARM: OMAP2+: DMA: Add slave map entries for 24xx external request lines
  usb: musb: tusb6010: Handle DMA TX completion in DMA callback as well
  usb: musb: tusb6010_omap: Allocate DMA channels upfront
  usb: musb: tusb6010_omap: Create new struct for DMA data/parameters
  usb: musb: tusb6010_omap: Use one musb_ep_select call in tusb_omap_dma_program
  usb: musb: tusb6010: Add MUSB_G_NO_SKB_RESERVE to quirks
  usb: musb: Add quirk to avoid skb reserve in gadget mode
  ...
2017-07-03 19:30:55 -07:00
Linus Torvalds
1b044f1cfc Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
 "A rather large update for timers/timekeeping:

   - compat syscall consolidation (Al Viro)

   - Posix timer consolidation (Christoph Helwig / Thomas Gleixner)

   - Cleanup of the device tree based initialization for clockevents and
     clocksources (Daniel Lezcano)

   - Consolidation of the FTTMR010 clocksource/event driver (Linus
     Walleij)

   - The usual set of small fixes and updates all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (93 commits)
  timers: Make the cpu base lock raw
  clocksource/drivers/mips-gic-timer: Fix an error code in 'gic_clocksource_of_init()'
  clocksource/drivers/fsl_ftm_timer: Unmap region obtained by of_iomap
  clocksource/drivers/tcb_clksrc: Make IO endian agnostic
  clocksource/drivers/sun4i: Switch to the timer-of common init
  clocksource/drivers/timer-of: Fix invalid iomap check
  Revert "ktime: Simplify ktime_compare implementation"
  clocksource/drivers: Fix uninitialized variable use in timer_of_init
  kselftests: timers: Add test for frequency step
  kselftests: timers: Fix inconsistency-check to not ignore first timestamp
  time: Add warning about imminent deprecation of CONFIG_GENERIC_TIME_VSYSCALL_OLD
  time: Clean up CLOCK_MONOTONIC_RAW time handling
  posix-cpu-timers: Make timespec to nsec conversion safe
  itimer: Make timeval to nsec conversion range limited
  timers: Fix parameter description of try_to_del_timer_sync()
  ktime: Simplify ktime_compare implementation
  clocksource/drivers/fttmr010: Factor out clock read code
  clocksource/drivers/fttmr010: Implement delay timer
  clocksource/drivers: Add timer-of common init routine
  clocksource/drivers/tcb_clksrc: Save timer context on suspend/resume
  ...
2017-07-03 16:14:51 -07:00
Linus Torvalds
7447d56217 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "Most of the changes are for tooling, the main changes in this cycle were:

   - Improve Intel-PT hardware tracing support, both on the kernel and
     on the tooling side: PTWRITE instruction support, power events for
     C-state tracing, etc. (Adrian Hunter)

   - Add support to measure SMI cost to the x86 architecture, with
     tooling support in 'perf stat' (Kan Liang)

   - Support function filtering in 'perf ftrace', plus related
     improvements (Namhyung Kim)

   - Allow adding and removing fields to the default 'perf script'
     columns, using + or - as field prefixes to do so (Andi Kleen)

   - Allow resolving the DSO name with 'perf script -F brstack{sym,off},dso'
     (Mark Santaniello)

   - Add perf tooling unwind support for PowerPC (Paolo Bonzini)

   - ... and various other improvements as well"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (84 commits)
  perf auxtrace: Add CPU filter support
  perf intel-pt: Do not use TSC packets for calculating CPU cycles to TSC
  perf intel-pt: Update documentation to include new ptwrite and power events
  perf intel-pt: Add example script for power events and PTWRITE
  perf intel-pt: Synthesize new power and "ptwrite" events
  perf intel-pt: Move code in intel_pt_synth_events() to simplify attr setting
  perf intel-pt: Factor out intel_pt_set_event_name()
  perf intel-pt: Tidy messages into called function intel_pt_synth_event()
  perf intel-pt: Tidy Intel PT evsel lookup into separate function
  perf intel-pt: Join needlessly wrapped lines
  perf intel-pt: Remove unused instructions_sample_period
  perf intel-pt: Factor out common code synthesizing event samples
  perf script: Add synthesized Intel PT power and ptwrite events
  perf/x86/intel: Constify the 'lbr_desc[]' array and make a function static
  perf script: Add 'synth' field for synthesized event payloads
  perf auxtrace: Add itrace option to output power events
  perf auxtrace: Add itrace option to output ptwrite events
  tools include: Add byte-swapping macros to kernel.h
  perf script: Add 'synth' event type for synthesized events
  x86/insn: perf tools: Add new ptwrite instruction
  ...
2017-07-03 12:40:46 -07:00
Linus Torvalds
892ad5acca Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Add CONFIG_REFCOUNT_FULL=y to allow the disabling of the 'full'
     (robustness checked) refcount_t implementation with slightly lower
     runtime overhead. (Kees Cook)

     The lighter weight variant is the default. The two variants use the
     same API. Having this variant was a precondition by some
     maintainers to merge refcount_t cleanups.

   - Add lockdep support for rtmutexes (Peter Zijlstra)

   - liblockdep fixes and improvements (Sasha Levin, Ben Hutchings)

   - ... misc fixes and improvements"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
  locking/refcount: Remove the half-implemented refcount_sub() API
  locking/refcount: Create unchecked atomic_t implementation
  locking/rtmutex: Don't initialize lockdep when not required
  locking/selftest: Add RT-mutex support
  locking/selftest: Remove the bad unlock ordering test
  rt_mutex: Add lockdep annotations
  MAINTAINERS: Claim atomic*_t maintainership
  locking/x86: Remove the unused atomic_inc_short() methd
  tools/lib/lockdep: Remove private kernel headers
  tools/lib/lockdep: Hide liblockdep output from test results
  tools/lib/lockdep: Add dummy current_gfp_context()
  tools/include: Add IS_ERR_OR_NULL to err.h
  tools/lib/lockdep: Add empty __is_[module,kernel]_percpu_address
  tools/lib/lockdep: Include err.h
  tools/include: Add (mostly) empty include/linux/sched/mm.h
  tools/lib/lockdep: Use LDFLAGS
  tools/lib/lockdep: Remove double-quotes from soname
  tools/lib/lockdep: Fix object file paths used in an out-of-tree build
  tools/lib/lockdep: Fix compilation for 4.11
  tools/lib/lockdep: Don't mix fd-based and stream IO
  ...
2017-07-03 12:14:18 -07:00
Linus Torvalds
330e9e4625 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
 "The sole purpose of these changes is to shrink and simplify the RCU
  code base, which has suffered from creeping bloat over the past couple
  of years. The end result is a net removal of ~2700 lines of code:

     79 files changed, 1496 insertions(+), 4211 deletions(-)

  Plus there's a marked reduction in the Kconfig space complexity as
  well, here's the number of matches on 'grep RCU' in the .config:

                               before       after

     x86-defconfig                 17          15
     x86-allmodconfig              33          20"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (86 commits)
  rcu: Remove RCU CPU stall warnings from Tiny RCU
  rcu: Remove event tracing from Tiny RCU
  rcu: Move RCU debug Kconfig options to kernel/rcu
  rcu: Move RCU non-debug Kconfig options to kernel/rcu
  rcu: Eliminate NOCBs CPU-state Kconfig options
  rcu: Remove debugfs tracing
  srcu: Remove Classic SRCU
  srcu: Fix rcutorture-statistics typo
  rcu: Remove SPARSE_RCU_POINTER Kconfig option
  rcu: Remove the now-obsolete PROVE_RCU_REPEATEDLY Kconfig option
  rcu: Remove typecheck() from RCU locking wrapper functions
  rcu: Remove #ifdef moving rcu_end_inkernel_boot from rcupdate.h
  rcu: Remove nohz_full full-system-idle state machine
  rcu: Remove the RCU_KTHREAD_PRIO Kconfig option
  rcu: Remove *_SLOW_* Kconfig options
  srcu: Use rnp->lock wrappers to replace explicit memory barriers
  rcu: Move rnp->lock wrappers for SRCU use
  rcu: Convert rnp->lock wrappers to macros for SRCU use
  rcu: Refactor #includes from include/linux/rcupdate.h
  bcm47xx: Fix build regression
  ...
2017-07-03 11:34:53 -07:00
Linus Torvalds
e94693f797 Merge branch 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
 "This is an extensive rewrite of the objdump tool to track all stack
  pointer modifications through the machine instructions of disassembled
  functions found in kernel .o files.

  This re-design removes the prior dependency on CONFIG_FRAME_POINTERS,
  with the goal to prepare the tool to generate kernel debuginfo data in
  the future. There's also an increase in checking/tracking robustness
  as a side effect as well.

  No (intended) changes to existing functionality"

* 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Silence warnings for functions which use IRET
  objtool: Implement stack validation 2.0
  objtool, x86: Add several functions and files to the objtool whitelist
  objtool: Move checking code to check.c
2017-07-03 11:12:04 -07:00
Linus Torvalds
81e3e04489 UUID/GUID updates:
- introduce the new uuid_t/guid_t types that are going to replace
    the somewhat confusing uuid_be/uuid_le types and make the terminology
    fit the various specs, as well as the userspace libuuid library.
    (me, based on a previous version from Amir)
  - consolidated generic uuid/guid helper functions lifted from XFS
    and libnvdimm (Amir and me)
  - conversions to the new types and helpers (Amir, Andy and me)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCAApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAllZfmILHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYMvyg/9EvWHOOsSdeDykCK3KdH2uIqnxwpl+m7ljccaGJIc
 MmaH0KnsP9p/Cuw5hESh2tYlmCYN7pmYziNXpf/LRS65/HpEYbs4oMqo8UQsN0UM
 2IXHfXY0HnCoG5OixH8RNbFTkxuGphsTY8meaiDr6aAmqChDQI2yGgQLo3WM2/Qe
 R9N1KoBWH/bqY6dHv+urlFwtsREm2fBH+8ovVma3TO73uZCzJGLJBWy3anmZN+08
 uYfdbLSyRN0T8rqemVdzsZ2SrpHYkIsYGUZV43F581vp8e/3OKMoMxpWRRd9fEsa
 MXmoaHcLJoBsyVSFR9lcx3axKrhAgBPZljASbbA0h49JneWXrzghnKBQZG2SnEdA
 ktHQ2sE4Yb5TZSvvWEKMQa3kXhEfIbTwgvbHpcDr5BUZX8WvEw2Zq8e7+Mi4+KJw
 QkvFC1S96tRYO2bxdJX638uSesGUhSidb+hJ/edaOCB/GK+sLhUdDTJgwDpUGmyA
 xVXTF51ramRS2vhlbzN79x9g33igIoNnG4/PV0FPvpCTSqxkHmPc5mK6Vals1lqt
 cW6XfUjSQECq5nmTBtYDTbA/T+8HhBgSQnrrvmferjJzZUFGr/7MXl+Evz2x4CjX
 OBQoAMu241w6Vp3zoXqxzv+muZ/NLar52M/zbi9TUjE0GvvRNkHvgCC4NmpIlWYJ
 Sxg=
 =J/4P
 -----END PGP SIGNATURE-----

Merge tag 'uuid-for-4.13' of git://git.infradead.org/users/hch/uuid

Pull uuid subsystem from Christoph Hellwig:
 "This is the new uuid subsystem, in which Amir, Andy and I have started
  consolidating our uuid/guid helpers and improving the types used for
  them. Note that various other subsystems have pulled in this tree, so
  I'd like it to go in early.

  UUID/GUID summary:

   - introduce the new uuid_t/guid_t types that are going to replace the
     somewhat confusing uuid_be/uuid_le types and make the terminology
     fit the various specs, as well as the userspace libuuid library.
     (me, based on a previous version from Amir)

   - consolidated generic uuid/guid helper functions lifted from XFS and
     libnvdimm (Amir and me)

   - conversions to the new types and helpers (Amir, Andy and me)"

* tag 'uuid-for-4.13' of git://git.infradead.org/users/hch/uuid: (34 commits)
  ACPI: hns_dsaf_acpi_dsm_guid can be static
  mmc: sdhci-pci: make guid intel_dsm_guid static
  uuid: Take const on input of uuid_is_null() and guid_is_null()
  thermal: int340x_thermal: fix compile after the UUID API switch
  thermal: int340x_thermal: Switch to use new generic UUID API
  acpi: always include uuid.h
  ACPI: Switch to use generic guid_t in acpi_evaluate_dsm()
  ACPI / extlog: Switch to use new generic UUID API
  ACPI / bus: Switch to use new generic UUID API
  ACPI / APEI: Switch to use new generic UUID API
  acpi, nfit: Switch to use new generic UUID API
  MAINTAINERS: add uuid entry
  tmpfs: generate random sb->s_uuid
  scsi_debug: switch to uuid_t
  nvme: switch to uuid_t
  sysctl: switch to use uuid_t
  partitions/ldm: switch to use uuid_t
  overlayfs: use uuid_t instead of uuid_be
  fs: switch ->s_uuid to uuid_t
  ima/policy: switch to use uuid_t
  ...
2017-07-03 09:55:26 -07:00
Rafael J. Wysocki
80abc82e6c Merge branch 'acpica'
* acpica: (53 commits)
  ACPICA: Use designated initializers
  ACPICA: Update version to 20170531
  ACPICA: Update a couple of debug output messages
  ACPICA: acpiexec: enhance local signal handler
  ACPICA: Simplify output for the ACPI Debug Object
  ACPICA: Unix application OSL: Correctly handle control-c (EINTR)
  ACPICA: Improvements for debug output only
  ACPICA: Disassembler: allow conflicting external declarations to be emitted.
  ACPICA: Disassembler: add external op to namespace on first pass
  ACPICA: Disassembler: prevent external op's from opening a new scope
  ACPICA: Changed Gbl_disasm_flag to acpi_gbl_disasm_flag
  ACPICA: Changing External to a named object
  ACPICA: Update two error messages to emit control method name
  ACPICA: Fix for Device/Thermal objects with ObjectType and DerefOf
  ACPICA: Comment update: spelling/format. No functional change
  ACPICA: Update comments, no functional change
  ACPICA: Split resource descriptor decode strings to a new file
  ACPICA: Remove extraneous status check
  ACPICA: Export the public mutex interfaces
  ACPICA: Disassembler: Abort on an invalid/unknown AML opcode
  ...
2017-07-03 14:24:28 +02:00
Rafael J. Wysocki
16b5b09240 Merge branch 'pm-tools'
* pm-tools:
  cpupower: Add support for new AMD family 0x17
  cpupower: Fix bug where return value was not used
  tools/power turbostat: update version number
  tools/power turbostat: decode MSR_IA32_MISC_ENABLE only on Intel
  tools/power turbostat: stop migrating, unless '-m'
  tools/power turbostat: if  --debug, print sampling overhead
  tools/power turbostat: hide SKL counters, when not requested
  intel_pstate: use updated msr-index.h HWP.EPP values
  tools/power x86_energy_perf_policy: support HWP.EPP
  x86: msr-index.h: fix shifts to ULL results in HWP macros.
  x86: msr-index.h: define HWP.EPP values
  x86: msr-index.h: define EPB mid-points
2017-07-03 14:17:16 +02:00
Rafael J. Wysocki
875aabf52e Merge branch 'uuid-types'
Merge 'uuid-types' from git://git.infradead.org/users/hch/uuid.git
2017-07-03 14:13:44 +02:00
Daniel Borkmann
6d191ed40d bpf: add various test cases for verifier selftest
Add couple of verifier test cases for x|imm += pkt_ptr, including the
imm += x extension.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03 02:22:52 -07:00
Daniel Borkmann
2be7e212d5 bpf: add bpf_skb_adjust_room helper
This work adds a helper that can be used to adjust net room of an
skb. The helper is generic and can be further extended in future.
Main use case is for having a programmatic way to add/remove room to
v4/v6 header options along with cls_bpf on egress and ingress hook
of the data path. It reuses most of the infrastructure that we added
for the bpf_skb_change_type() helper which can be used in nat64
translations. Similarly, the helper only takes care of adjusting the
room so that related data is populated and csum adapted out of the
BPF program using it.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-03 02:22:52 -07:00
Lawrence Brakmo
04df41e343 bpf: update tools/include/uapi/linux/bpf.h
Update tools/include/uapi/linux/bpf.h to include changes related to new
bpf sock_ops program type.

Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01 16:15:14 -07:00
Linus Torvalds
a527bf6140 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Thomas Gleixner:
 "The last fix for perf for this cycles:

   - Prevent a segfault when kernel.kptr_restrict=2 is set by avoiding a
     null pointer dereference"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf machine: Fix segfault for kernel.kptr_restrict=2
2017-07-01 08:46:52 -07:00
Shuah Khan
e67f85fb96 selftests: membarrier: use ksft_* var arg msg api
Use ksft_* var arg msg to include strerror() info. in test output. Remove
redundant SKIP/FAIL/PASS logic as it is no longer needed with ksft_ api.
Improve test output to be consistent and clear.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-06-30 16:16:23 -06:00
Shuah Khan
0732d06ee5 selftests: breakpoints: breakpoint_test_arm64: convert test to use TAP13
Convert breakpoint_test_arm64 output to TAP13 format. Use ksft_* var arg
msg api to include strerror() info. in the output. Change output from
child process to use ksft_print_msg() instead of ksft_exit_* to avoid
double counting tests and ensure parent process does the test counter
incrementing.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-06-30 16:16:17 -06:00
Shuah Khan
3fa72f2c78 selftests: breakpoints: step_after_suspend_test use ksft_* var arg msg api
Use ksft_* var arg msg to include strerror() info. in test output and
simplify test_result and exit_* using var arg msg api.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-06-30 16:16:10 -06:00
Shuah Khan
4ca562878b selftests: breakpoint_test: use ksft_* var arg msg api
Use ksft_* var arg msg to include strerror() info. in test output. Change
output from child process to use ksft_print_msg() instead of ksft_exit_*
to avoid double counting tests and ensure parent does the incrementing
test counters. Also includes unused variable cleanup.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-06-30 16:15:58 -06:00
Paul Elder
ab52a48445 kselftest: add ksft_print_msg() function to output general information
Add a generic information output function: ksft_print_msg()

Signed-off-by: Paul Elder <paul.elder@pitt.edu>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-06-30 16:15:04 -06:00
Paul Elder
151b273211 kselftest: make ksft_* output functions variadic
Make the ksft_* output functions variadic to allow string formatting
directly in these functions.

Signed-off-by: Paul Elder <paul.elder@pitt.edu>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-06-30 16:14:55 -06:00
Josh Poimboeuf
2513cbf9d6 objtool: Silence warnings for functions which use IRET
Previously, objtool ignored functions which have the IRET instruction
in them.  That's because it assumed that such functions know what
they're doing with respect to frame pointers.

With the new "objtool 2.0" changes, it stopped ignoring such functions,
and started complaining about them:

  arch/x86/kernel/alternative.o: warning: objtool: do_sync_core()+0x1b: unsupported instruction in callable function
  arch/x86/kernel/alternative.o: warning: objtool: text_poke()+0x1a8: unsupported instruction in callable function
  arch/x86/kernel/ftrace.o: warning: objtool: do_sync_core()+0x16: unsupported instruction in callable function
  arch/x86/kernel/cpu/mcheck/mce.o: warning: objtool: machine_check_poll()+0x166: unsupported instruction in callable function
  arch/x86/kernel/cpu/mcheck/mce.o: warning: objtool: do_machine_check()+0x147: unsupported instruction in callable function

Silence those warnings for now.  They can be re-enabled later, once we
have unwind hints which will allow the code to annotate the IRET usages.

Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Fixes: baa41469a7 ("objtool: Implement stack validation 2.0")
Link: http://lkml.kernel.org/r/20170630140934.mmwtpockvpupahro@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-30 19:43:50 +02:00
David S. Miller
b079115937 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
A set of overlapping changes in macvlan and the rocker
driver, nothing serious.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-30 12:43:08 -04:00
Andy Lutomirski
796a3bae2f selftests/capabilities: Fix the test_execve test
test_execve does rather odd mount manipulations to safely create
temporary setuid and setgid executables that aren't visible to the
rest of the system.  Those executables end up in the test's cwd, but
that cwd is MNT_DETACHed.

The core namespace code considers MNT_DETACHed trees to belong to no
mount namespace at all and, in general, MNT_DETACHed trees are only
barely function.  This interacted with commit 380cf5ba6b ("fs:
Treat foreign mounts as nosuid") to cause all MNT_DETACHed trees to
act as though they're nosuid, breaking the test.

Fix it by just not detaching the tree.  It's still in a private
mount namespace and is therefore still invisible to the rest of the
system (except via /proc, and the same nosuid logic will protect all
other programs on the system from believing in test_execve's setuid
bits).

While we're at it, fix some blatant whitespace problems.

Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: 380cf5ba6b ("fs: Treat foreign mounts as nosuid")
Cc: stable@vger.kernel.org
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Greg KH <greg@kroah.com>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-06-30 10:06:24 -06:00
Shuah Khan
4ca90c21b2 selftests: intel_pstate: add .gitignore
Add .gitignore for generated files.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-06-30 10:06:24 -06:00
Po-Hsu Lin
5ff0c60b0e selftests: fix memory-hotplug test
In the memory offline test, the $ration was used with RANDOM as the
possibility to get it offlined, correct it to become the portion of
available removable memory blocks.

Also ask the tool to try to offline the next available memory block
if the attempt is unsuccessful. It will only fail if all removable
memory blocks are busy.

A nice example:
$ sudo ./test.sh
Test scope: 10% hotplug memory
	online all hot-pluggable memory in offline state:
		SKIPPED - no hot-pluggable memory in offline state
	offline 10% hot-pluggable memory in online state
	trying to offline 3 out of 28 memory block(s):
online->offline memory1
online->offline memory10
./test.sh: line 74: echo: write error: Resource temporarily unavailable
offline_memory_expect_success 10: unexpected fail
online->offline memory100
online->offline memory101
	online all hot-pluggable memory in offline state:
offline->online memory1
offline->online memory100
offline->online memory101
skip extra tests: debugfs is not mounted
$ echo $?
0

Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-06-30 10:06:23 -06:00
Po-Hsu Lin
02d8f075ac selftests: add missing test name in memory-hotplug test
There is no prompt for testing memory notifier error injection,
added with the same echo format of other tests above.

Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-06-30 10:06:23 -06:00
Po-Hsu Lin
72441ea588 selftests: check percentage range for memory-hotplug test
Check the precentage range for -r flag in memory-hotplug test.

Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-06-30 10:06:22 -06:00
Po-Hsu Lin
a34b28c92e selftests: check hot-pluggagble memory for memory-hotplug test
Check for hot-pluggable memory availability in prerequisite() of the
memory-hotplug test.

Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-06-30 10:06:22 -06:00
Po-Hsu Lin
593f927851 selftests: typo correction for memory-hotplug test
Typo fixed for hotpluggable_offline_memory() in memory-hotplug test.

Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-06-30 10:06:21 -06:00
Masami Hiramatsu
d87b29179a selftests: ftrace: Use md5sum to take less time of checking logs
Use md5sum so that it takes less time of checking
trace logs update. Since busybox tail/cat takes too
long time to read the trace log, this uses md5sum
to check whether trace log is updated or not.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
2017-06-30 10:06:02 -06:00
Adrian Hunter
644e0840ad perf auxtrace: Add CPU filter support
Decoding auxtrace data can take a long time. To avoid decoding
unnecessarily, filter auxtrace data that is collected per-cpu before it is
decoded.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-38-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-30 11:50:55 -03:00
Adrian Hunter
38b65b0891 perf intel-pt: Do not use TSC packets for calculating CPU cycles to TSC
CBR (core-to-bus ratio) packets provide an indication of CPU frequency. A
more accurate measure can be made by counting the cycles (given by CYC
packets) in between other timing packets (either MTC or TSC). Using TSC
packets has at least 2 issues: 1) timing might have stopped (e.g. mwait) or
2) TSC packets within PSB+ might slip past CYC packets. For now, simply do
not use TSC packets for calculating CPU cycles to TSC. That leaves the case
where 2 MTC packets are used, otherwise falling back to the CBR value.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-37-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-30 11:50:55 -03:00
Adrian Hunter
ead2bfdb85 perf intel-pt: Update documentation to include new ptwrite and power events
Update documentation to include new ptwrite and power events.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-36-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-30 11:50:54 -03:00
Adrian Hunter
cc892720d8 perf intel-pt: Add example script for power events and PTWRITE
Add script intel-pt-events.py that provides an example of how to unpack the
raw data for power events and PTWRITE.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-35-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-30 11:50:53 -03:00
Adrian Hunter
3797307576 perf intel-pt: Synthesize new power and "ptwrite" events
Synthesize new power and ptwrite events.

Power events report changes to C-state but I have also added support
for the existing CBR (core-to-bus ratio) packet and included that
when outputting power events.

The PTWRITE packet is associated with the new "ptwrite" instruction,
which is essentially just a way to stuff a 32 or 64 bit value into the
PT trace.

More details can be found in the patches that add documentation and in
the Intel SDM.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1498811805-2335-1-git-send-email-adrian.hunter@intel.com
[ Copy the description of such packet from the patchkit cover message ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-30 11:48:28 -03:00
Adrian Hunter
4a9fd4e0ef perf intel-pt: Move code in intel_pt_synth_events() to simplify attr setting
intel_pt_synth_events() uses the same attr structure to create each event.
Move the code around a bit to simplify that.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-33-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-30 11:44:36 -03:00
Adrian Hunter
bbac88ed64 perf intel-pt: Factor out intel_pt_set_event_name()
Factor out intel_pt_set_event_name() so it can be reused.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-32-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-30 11:44:36 -03:00
Adrian Hunter
63a22cd9f8 perf intel-pt: Tidy messages into called function intel_pt_synth_event()
Tidy print messages into called function intel_pt_synth_event().

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-31-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-30 11:44:35 -03:00
Adrian Hunter
85a564d26d perf intel-pt: Tidy Intel PT evsel lookup into separate function
Tidy the lookup of the Intel PT selected event (perf_evsel) into a separate
function.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-30-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-30 11:44:35 -03:00
Adrian Hunter
406a180501 perf intel-pt: Join needlessly wrapped lines
Join needlessly wrapped lines.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-29-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-30 11:44:34 -03:00
Adrian Hunter
f90d07a9f6 perf intel-pt: Remove unused instructions_sample_period
Remove unused struct intel_pt member instructions_sample_period.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-28-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-30 11:44:33 -03:00
Adrian Hunter
0f3e53799c perf intel-pt: Factor out common code synthesizing event samples
Factor out common code in functions synthesizing event samples i.e.
intel_pt_synth_branch_sample(), intel_pt_synth_instruction_sample() and
intel_pt_synth_transaction_sample().

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1495786658-18063-27-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-30 11:44:33 -03:00
Adrian Hunter
65c5e18f9d perf script: Add synthesized Intel PT power and ptwrite events
Add definitions for synthesized Intel PT events for power and ptwrite.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1498811802-2301-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-30 11:40:20 -03:00