forked from Minki/linux
a704ddc250
11502 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Thomas Richter
|
f9ea3225dd |
bpf: fix selftest/bpf/test_pkt_md_access on s390x
Commit |
||
Daniel Borkmann
|
2c460621bb |
bpf: fix byte order test in test_verifier
We really must check with #if __BYTE_ORDER == XYZ instead of just presence of #ifdef __LITTLE_ENDIAN. I noticed that when actually running this on big endian machine, the latter test resolves to true for user space, same for #ifdef __BIG_ENDIAN. E.g., looking at endian.h from libc, both are also defined there, so we really must test this against __BYTE_ORDER instead for proper insns selection. For the kernel, such checks are fine though e.g. see |
||
|
Daniel Borkmann
|
bad1926dd2 |
bpf, s390: fix build for libbpf and selftest suite
The BPF feature test as well as libbpf is missing the __NR_bpf
define for s390 and currently refuses to compile (selftest suite
depends on libbpf as well). Similar issue was fixed some time
ago via
|
||
Linus Torvalds
|
bc78d646e7 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Handle notifier registry failures properly in tun/tap driver, from
Tonghao Zhang.
2) Fix bpf verifier handling of subtraction bounds and add a testcase
for this, from Edward Cree.
3) Increase reset timeout in ftgmac100 driver, from Ben Herrenschmidt.
4) Fix use after free in prd_retire_rx_blk_timer_exired() in AF_PACKET,
from Cong Wang.
5) Fix SElinux regression due to recent UDP optimizations, from Paolo
Abeni.
6) We accidently increment IPSTATS_MIB_FRAGFAILS in the ipv6 code
paths, fix from Stefano Brivio.
7) Fix some mem leaks in dccp, from Xin Long.
8) Adjust MDIO_BUS kconfig deps to avoid build errors, from Arnd
Bergmann.
9) Mac address length check and buffer size fixes from Cong Wang.
10) Don't leak sockets in ipv6 udp early demux, from Paolo Abeni.
11) Fix return value when copy_from_user() fails in
bpf_prog_get_info_by_fd(), from Daniel Borkmann.
12) Handle PHY_HALTED properly in phy library state machine, from
Florian Fainelli.
13) Fix OOPS in fib_sync_down_dev(), from Ido Schimmel.
14) Fix truesize calculation in virtio_net which led to performance
regressions, from Michael S Tsirkin.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
samples/bpf: fix bpf tunnel cleanup
udp6: fix jumbogram reception
ppp: Fix a scheduling-while-atomic bug in del_chan
Revert "net: bcmgenet: Remove init parameter from bcmgenet_mii_config"
virtio_net: fix truesize for mergeable buffers
mv643xx_eth: fix of_irq_to_resource() error check
MAINTAINERS: Add more files to the PHY LIBRARY section
ipv4: fib: Fix NULL pointer deref during fib_sync_down_dev()
net: phy: Correctly process PHY_HALTED in phy_stop_machine()
sunhme: fix up GREG_STAT and GREG_IMASK register offsets
bpf: fix bpf_prog_get_info_by_fd to dump correct xlated_prog_len
tcp: avoid bogus gcc-7 array-bounds warning
net: tc35815: fix spelling mistake: "Intterrupt" -> "Interrupt"
bpf: don't indicate success when copy_from_user fails
udp6: fix socket leak on early demux
net: thunderx: Fix BGX transmit stall due to underflow
Revert "vhost: cache used event for better performance"
team: use a larger struct for mac address
net: check dev->addr_len for dev_set_mac_address()
phy: bcm-ns-usb3: fix MDIO_BUS dependency
...
|
||
Jakub Kicinski
|
d777b2ddbe |
bpf: don't zero out the info struct in bpf_obj_get_info_by_fd()
The buffer passed to bpf_obj_get_info_by_fd() should be initialized
to zeros. Kernel will enforce that to guarantee we can safely extend
info structures in the future.
Making the bpf_obj_get_info_by_fd() call in libbpf perform the zeroing
is problematic, however, since some members of the info structures
may need to be initialized by the callers (for instance pointers
to buffers to which kernel is to dump translated and jited images).
Remove the zeroing and fix up the in-tree callers before any kernel
has been released with this code.
As Daniel points out this seems to be the intended operation anyway,
since commit
|
||
Lin Ma
|
67fbcd62f5 |
tools/kvm_stat: add '-f help' to get the available event list
Signed-off-by: Lin Ma <lma@suse.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Lin Ma
|
efcb521943 |
tools/kvm_stat: use variables instead of hard paths in help output
Using variables instead of hard paths makes the requirements information more accurate. Signed-off-by: Lin Ma <lma@suse.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
Edward Cree
|
545722cb0f |
selftests/bpf: subtraction bounds test
There is a bug in the verifier's handling of BPF_SUB: [a,b] - [c,d] yields was [a-c, b-d] rather than the correct [a-d, b-c]. So here is a test which, with the bogus handling, will produce ranges of [0,0] and thus allowed accesses; whereas the correct handling will give a range of [-255, 255] (and hence the right-shift will give a range of [0, 255]) and the accesses will be rejected. Signed-off-by: Edward Cree <ecree@solarflare.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Linus Torvalds
|
bbcdea658f |
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar: "Two hw-enablement patches, two race fixes, three fixes for regressions of semantics, plus a number of tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Add proper condition to run sched_task callbacks perf/core: Fix locking for children siblings group read perf/core: Fix scheduling regression of pinned groups perf/x86/intel: Fix debug_store reset field for freq events perf/x86/intel: Add Goldmont Plus CPU PMU support perf/x86/intel: Enable C-state residency events for Apollo Lake perf symbols: Accept zero as the kernel base address Revert "perf/core: Drop kernel samples even though :u is specified" perf annotate: Fix broken arrow at row 0 connecting jmp instruction to its target perf evsel: State in the default event name if attr.exclude_kernel is set perf evsel: Fix attr.exclude_kernel setting for default cycles:p |
||
|
Linus Torvalds
|
96080f6977 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) BPF verifier signed/unsigned value tracking fix, from Daniel
Borkmann, Edward Cree, and Josef Bacik.
2) Fix memory allocation length when setting up calls to
->ndo_set_mac_address, from Cong Wang.
3) Add a new cxgb4 device ID, from Ganesh Goudar.
4) Fix FIB refcount handling, we have to set it's initial value before
the configure callback (which can bump it). From David Ahern.
5) Fix double-free in qcom/emac driver, from Timur Tabi.
6) A bunch of gcc-7 string format overflow warning fixes from Arnd
Bergmann.
7) Fix link level headroom tests in ip_do_fragment(), from Vasily
Averin.
8) Fix chunk walking in SCTP when iterating over error and parameter
headers. From Alexander Potapenko.
9) TCP BBR congestion control fixes from Neal Cardwell.
10) Fix SKB fragment handling in bcmgenet driver, from Doug Berger.
11) BPF_CGROUP_RUN_PROG_SOCK_OPS needs to check for null __sk, from Cong
Wang.
12) xmit_recursion in ppp driver needs to be per-device not per-cpu,
from Gao Feng.
13) Cannot release skb->dst in UDP if IP options processing needs it.
From Paolo Abeni.
14) Some netdev ioctl ifr_name[] NULL termination fixes. From Alexander
Levin and myself.
15) Revert some rtnetlink notification changes that are causing
regressions, from David Ahern.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits)
net: bonding: Fix transmit load balancing in balance-alb mode
rds: Make sure updates to cp_send_gen can be observed
net: ethernet: ti: cpsw: Push the request_irq function to the end of probe
ipv4: initialize fib_trie prior to register_netdev_notifier call.
rtnetlink: allocate more memory for dev_set_mac_address()
net: dsa: b53: Add missing ARL entries for BCM53125
bpf: more tests for mixed signed and unsigned bounds checks
bpf: add test for mixed signed and unsigned bounds checks
bpf: fix up test cases with mixed signed/unsigned bounds
bpf: allow to specify log level and reduce it for test_verifier
bpf: fix mixed signed/unsigned derived min/max value bounds
ipv6: avoid overflow of offset in ip6_find_1stfragopt
net: tehuti: don't process data if it has not been copied from userspace
Revert "rtnetlink: Do not generate notifications for CHANGEADDR event"
net: dsa: mv88e6xxx: Enable CMODE config support for 6390X
dt-binding: ptp: Add SoC compatibility strings for dte ptp clock
NET: dwmac: Make dwmac reset unconditional
net: Zero terminate ifr_name in dev_ifname().
wireless: wext: terminate ifr name coming from userspace
netfilter: fix netfilter_net_init() return
...
|
||
|
Daniel Borkmann
|
8641250251 |
bpf: more tests for mixed signed and unsigned bounds checks
Add a couple of more test cases to BPF selftests that are related to mixed signed and unsigned checks. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Edward Cree
|
b712296a41 |
bpf: add test for mixed signed and unsigned bounds checks
These failed due to a bug in verifier bounds handling. Signed-off-by: Edward Cree <ecree@solarflare.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Daniel Borkmann
|
a150213286 |
bpf: fix up test cases with mixed signed/unsigned bounds
Fix the few existing test cases that used mixed signed/unsigned bounds and switch them only to one flavor. Reason why we need this is that proper boundaries cannot be derived from mixed tests. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Daniel Borkmann
|
d655490417 |
bpf: allow to specify log level and reduce it for test_verifier
For the test_verifier case, it's quite hard to parse log level 2 to figure out what's causing an issue when used to log level 1. We do want to use bpf_verify_program() in order to simulate some of the tests with strict alignment. So just add an argument to pass the level and put it to 1 for test_verifier. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Linus Torvalds
|
867eacd7fb |
Merge branch 'akpm' (patches from Andrew)
Merge even more updates from Andrew Morton: - a few leftovers - fault-injector rework - add a module loader test driver * emailed patches from Andrew Morton <akpm@linux-foundation.org>: kmod: throttle kmod thread limit kmod: add test driver to stress test the module loader MAINTAINERS: give kmod some maintainer love xtensa: use generic fb.h fault-inject: add /proc/<pid>/fail-nth fault-inject: simplify access check for fail-nth fault-inject: make fail-nth read/write interface symmetric fault-inject: parse as natural 1-based value for fail-nth write interface fault-inject: automatically detect the number base for fail-nth write interface kernel/watchdog.c: use better pr_fmt prefix MAINTAINERS: move the befs tree to kernel.org lib/atomic64_test.c: add a test that atomic64_inc_not_zero() returns an int mm: fix overflow check in expand_upwards() |
||
Luis R. Rodriguez
|
6d7964a722 |
kmod: throttle kmod thread limit
If we reach the limit of modprobe_limit threads running the next request_module() call will fail. The original reason for adding a kill was to do away with possible issues with in old circumstances which would create a recursive series of request_module() calls. We can do better than just be super aggressive and reject calls once we've reached the limit by simply making pending callers wait until the threshold has been reduced, and then throttling them in, one by one. This throttling enables requests over the kmod concurrent limit to be processed once a pending request completes. Only the first item queued up to wait is woken up. The assumption here is once a task is woken it will have no other option to also kick the queue to check if there are more pending tasks -- regardless of whether or not it was successful. By throttling and processing only max kmod concurrent tasks we ensure we avoid unexpected fatal request_module() calls, and we keep memory consumption on module loading to a minimum. With x86_64 qemu, with 4 cores, 4 GiB of RAM it takes the following run time to run both tests: time ./kmod.sh -t 0008 real 0m16.366s user 0m0.883s sys 0m8.916s time ./kmod.sh -t 0009 real 0m50.803s user 0m0.791s sys 0m9.852s Link: http://lkml.kernel.org/r/20170628223155.26472-4-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Jessica Yu <jeyu@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michal Marek <mmarek@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Luis R. Rodriguez
|
d9c6a72d6f |
kmod: add test driver to stress test the module loader
This adds a new stress test driver for kmod: the kernel module loader. The new stress test driver, test_kmod, is only enabled as a module right now. It should be possible to load this as built-in and load tests early (refer to the force_init_test module parameter), however since a lot of test can get a system out of memory fast we leave this disabled for now. Using a system with 1024 MiB of RAM can *easily* get your kernel OOM fast with this test driver. The test_kmod driver exposes API knobs for us to fine tune simple request_module() and get_fs_type() calls. Since these API calls only allow each one parameter a test driver for these is rather simple. Other factors that can help out test driver though are the number of calls we issue and knowing current limitations of each. This exposes configuration as much as possible through userspace to be able to build tests directly from userspace. Since it allows multiple misc devices its will eventually (once we add a knob to let us create new devices at will) also be possible to perform more tests in parallel, provided you have enough memory. We only enable tests we know work as of right now. Demo screenshots: # tools/testing/selftests/kmod/kmod.sh kmod_test_0001_driver: OK! - loading kmod test kmod_test_0001_driver: OK! - Return value: 256 (MODULE_NOT_FOUND), expected MODULE_NOT_FOUND kmod_test_0001_fs: OK! - loading kmod test kmod_test_0001_fs: OK! - Return value: -22 (-EINVAL), expected -EINVAL kmod_test_0002_driver: OK! - loading kmod test kmod_test_0002_driver: OK! - Return value: 256 (MODULE_NOT_FOUND), expected MODULE_NOT_FOUND kmod_test_0002_fs: OK! - loading kmod test kmod_test_0002_fs: OK! - Return value: -22 (-EINVAL), expected -EINVAL kmod_test_0003: OK! - loading kmod test kmod_test_0003: OK! - Return value: 0 (SUCCESS), expected SUCCESS kmod_test_0004: OK! - loading kmod test kmod_test_0004: OK! - Return value: 0 (SUCCESS), expected SUCCESS kmod_test_0005: OK! - loading kmod test kmod_test_0005: OK! - Return value: 0 (SUCCESS), expected SUCCESS kmod_test_0006: OK! - loading kmod test kmod_test_0006: OK! - Return value: 0 (SUCCESS), expected SUCCESS kmod_test_0005: OK! - loading kmod test kmod_test_0005: OK! - Return value: 0 (SUCCESS), expected SUCCESS kmod_test_0006: OK! - loading kmod test kmod_test_0006: OK! - Return value: 0 (SUCCESS), expected SUCCESS XXX: add test restult for 0007 Test completed You can also request for specific tests: # tools/testing/selftests/kmod/kmod.sh -t 0001 kmod_test_0001_driver: OK! - loading kmod test kmod_test_0001_driver: OK! - Return value: 256 (MODULE_NOT_FOUND), expected MODULE_NOT_FOUND kmod_test_0001_fs: OK! - loading kmod test kmod_test_0001_fs: OK! - Return value: -22 (-EINVAL), expected -EINVAL Test completed Lastly, the current available number of tests: # tools/testing/selftests/kmod/kmod.sh --help Usage: tools/testing/selftests/kmod/kmod.sh [ -t <4-number-digit> ] Valid tests: 0001-0009 0001 - Simple test - 1 thread for empty string 0002 - Simple test - 1 thread for modules/filesystems that do not exist 0003 - Simple test - 1 thread for get_fs_type() only 0004 - Simple test - 2 threads for get_fs_type() only 0005 - multithreaded tests with default setup - request_module() only 0006 - multithreaded tests with default setup - get_fs_type() only 0007 - multithreaded tests with default setup test request_module() and get_fs_type() 0008 - multithreaded - push kmod_concurrent over max_modprobes for request_module() 0009 - multithreaded - push kmod_concurrent over max_modprobes for get_fs_type() The following test cases currently fail, as such they are not currently enabled by default: # tools/testing/selftests/kmod/kmod.sh -t 0008 # tools/testing/selftests/kmod/kmod.sh -t 0009 To be sure to run them as intended please unload both of the modules: o test_module o xfs And ensure they are not loaded on your system prior to testing them. If you use these paritions for your rootfs you can change the default test driver used for get_fs_type() by exporting it into your environment. For example of other test defaults you can override refer to kmod.sh allow_user_defaults(). Behind the scenes this is how we fine tune at a test case prior to hitting a trigger to run it: cat /sys/devices/virtual/misc/test_kmod0/config echo -n "2" > /sys/devices/virtual/misc/test_kmod0/config_test_case echo -n "ext4" > /sys/devices/virtual/misc/test_kmod0/config_test_fs echo -n "80" > /sys/devices/virtual/misc/test_kmod0/config_num_threads cat /sys/devices/virtual/misc/test_kmod0/config echo -n "1" > /sys/devices/virtual/misc/test_kmod0/config_num_threads Finally to trigger: echo -n "1" > /sys/devices/virtual/misc/test_kmod0/trigger_config The kmod.sh script uses the above constructs to build different test cases. A bit of interpretation of the current failures follows, first two premises: a) When request_module() is used userspace figures out an optimized version of module order for us. Once it finds the modules it needs, as per depmod symbol dep map, it will finit_module() the respective modules which are needed for the original request_module() request. b) We have an optimization in place whereby if a kernel uses request_module() on a module already loaded we never bother userspace as the module already is loaded. This is all handled by kernel/kmod.c. A few things to consider to help identify root causes of issues: 0) kmod 19 has a broken heuristic for modules being assumed to be built-in to your kernel and will return 0 even though request_module() failed. Upgrade to a newer version of kmod. 1) A get_fs_type() call for "xfs" will request_module() for "fs-xfs", not for "xfs". The optimization in kernel described in b) fails to catch if we have a lot of consecutive get_fs_type() calls. The reason is the optimization in place does not look for aliases. This means two consecutive get_fs_type() calls will bump kmod_concurrent, whereas request_module() will not. This one explanation why test case 0009 fails at least once for get_fs_type(). 2) If a module fails to load --- for whatever reason (kmod_concurrent limit reached, file not yet present due to rootfs switch, out of memory) we have a period of time during which module request for the same name either with request_module() or get_fs_type() will *also* fail to load even if the file for the module is ready. This explains why *multiple* NULLs are possible on test 0009. 3) finit_module() consumes quite a bit of memory. 4) Filesystems typically also have more dependent modules than other modules, its important to note though that even though a get_fs_type() call does not incur additional kmod_concurrent bumps, since userspace loads dependencies it finds it needs via finit_module_fd(), it *will* take much more memory to load a module with a lot of dependencies. Because of 3) and 4) we will easily run into out of memory failures with certain tests. For instance test 0006 fails on qemu with 1024 MiB of RAM. It panics a box after reaping all userspace processes and still not having enough memory to reap. [arnd@arndb.de: add dependencies for test module] Link: http://lkml.kernel.org/r/20170630154834.3689272-1-arnd@arndb.de Link: http://lkml.kernel.org/r/20170628223155.26472-3-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Jessica Yu <jeyu@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michal Marek <mmarek@suse.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
ccd5d1b91f |
New IDT NTB driver and changes to the NTB infrastructure to allow for
this different kind of NTB HW, some style fixes (per Greg KH recommendation), and some ntb_test tweaks. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJZZowhAAoJEG5mS6x6i9IjNx8P/0DTYNqBRXg4PSET7+6/Z6yq Gz09DRw42dwHXN70ytEwtdRP7jcp3agrvBpRty3EgBygpLlMfOA0iQ6crVdBaza0 XzRuSl1iEd8oSX3CmJN8dIIWueNiPiqvG6as+j1kjZRZst21oqiMLTO3uO37oBh+ 7/ltCkQtQdco74fiaqnN1iDeKK2lj3qHPJxb2AbeGIxj3lOr6NttPifd0zovimtb keBCbaYyQaTxDoNzRwQmZtQNB2bwC/2V1sAM5L1T/xkVIBWXH8AUqJO1iVC4ptjI VURvxitDMo28JDc4hgO63AVHsvz8zLbgKsCNK0ia+rtalSLJkDBBN8Qaf7e10hbh 6YUg2eXzIGusdvFowKnOdXhHYAqrQXMBcWgM2ZVe1YBj8QqZKQ0LL4h9ooVuP9HV 2hZc3GfMT+iUGmQKdk+rtDVLxYNnsng1NT/5ZxCHBQptrb+/Rqey/wDYdPV2TpnD JfRpIFny29NOu74sa4W5GEPWI3AL7WAPAA1WH7RHy5rVDPfX20DcUQdvKvpo25y8 IdH7caSiBrjpc2GQPvkaziHlLLdZoRNwqJnmHDyUatukdmrElV/oTIRhaYQmLMK0 /xTFS7YXsmiOGqlfILW9VXdZIlLXSKuNSPX1HUcJ91l2Ik7m0PiK382jKOJVXqcZ Frt1CgnCclCDYHBD4yfm =SG8F -----END PGP SIGNATURE----- Merge tag 'ntb-4.13' of git://github.com/jonmason/ntb Pull NTB updates from Jon Mason: "The major change in the series is a rework of the NTB infrastructure to all for IDT hardware to be supported (and resulting fallout from that). There are also a few clean-ups, etc. New IDT NTB driver and changes to the NTB infrastructure to allow for this different kind of NTB HW, some style fixes (per Greg KH recommendation), and some ntb_test tweaks" * tag 'ntb-4.13' of git://github.com/jonmason/ntb: ntb_netdev: set the net_device's parent ntb: Add error path/handling to Debug FS entry creation ntb: Add more debugfs support for ntb_perf testing options ntb: Remove debug-fs variables from the context structure ntb: Add a module option to control affinity of DMA channels NTB: Add IDT 89HPESxNTx PCIe-switches support ntb_hw_intel: Style fixes: open code macros that just obfuscate code ntb_hw_amd: Style fixes: open code macros that just obfuscate code NTB: Add ntb.h comments NTB: Add PCIe Gen4 link speed NTB: Add new Memory Windows API documentation NTB: Add Messaging NTB API NTB: Alter Scratchpads API to support multi-ports devices NTB: Alter MW API to support multi-ports devices NTB: Alter link-state API to support multi-port devices NTB: Add indexed ports NTB API NTB: Make link-state API being declared first NTB: ntb_test: add parameter for doorbell bitmask NTB: ntb_test: modprobe on remote host |
||
|
Linus Torvalds
|
bc0f51d359 |
A few more minor updates:
- Show the tgid mappings for user space trace tools to use - Fix and optimize the comm and tgid cache recording - Sanitize derived kprobe names - Ftrace selftest updates - trace file header fix - Update of Documentation/trace/ftrace.txt - Compiler warning fixes - Fix possible uninitialized variable -----BEGIN PGP SIGNATURE----- iQExBAABCAAbBQJZZ2rbFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L V3MIAI3NZ3dr0dKJ7DMF1jsQc24YF/bMG2noWm2b9+H/sO+gbnJKsizqzrB2Cm8S lFCYGSydLKGGZgKob3wkAX15iO2fxcUvJOKzkKxmyDbwAteABRf9LSr/llthRIsT 8kSPI5bgJ5dah+lvhl9+1ekarsIZGr41svY97Knj9A2K18kQplnSNqgatkIuV2Kn hIoiPI0tG2y27In2JJoaTedAHj4NIwmI3nhTt6nks0GN7ICx3bMcvdE9l+zB+OLJ akAehsTk3kcNb66ttoj6ZTzGZ7kaes96Cl6/uamVpXzh3SXla36ux1r9Kp8bgONE EgrJwbRwU8BMDaattutDxT7/XmU= =TPGB -----END PGP SIGNATURE----- Merge tag 'trace-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull more tracing updates from Steven Rostedt: "A few more minor updates: - Show the tgid mappings for user space trace tools to use - Fix and optimize the comm and tgid cache recording - Sanitize derived kprobe names - Ftrace selftest updates - trace file header fix - Update of Documentation/trace/ftrace.txt - Compiler warning fixes - Fix possible uninitialized variable" * tag 'trace-v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix uninitialized variable in match_records() ftrace: Remove an unneeded NULL check ftrace: Hide cached module code for !CONFIG_MODULES tracing: Do note expose stack_trace_filter without DYNAMIC_FTRACE tracing: Update Documentation/trace/ftrace.txt tracing: Fixup trace file header alignment selftests/ftrace: Add a testcase for kprobe event naming selftests/ftrace: Add a test to probe module functions selftests/ftrace: Update multiple kprobes test for powerpc trace/kprobes: Sanitize derived event names tracing: Attempt to record other information even if some fail tracing: Treat recording tgid for idle task as a success tracing: Treat recording comm for idle task as a success tracing: Add saved_tgids file to show cached pid to tgid mappings |
||
|
Linus Torvalds
|
ad51271afc |
Merge branch 'akpm' (patches from Andrew)
Merge yet more updates from Andrew Morton: - various misc things - kexec updates - sysctl core updates - scripts/gdb udpates - checkpoint-restart updates - ipc updates - kernel/watchdog updates - Kees's "rough equivalent to the glibc _FORTIFY_SOURCE=1 feature" - "stackprotector: ascii armor the stack canary" - more MM bits - checkpatch updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (96 commits) writeback: rework wb_[dec|inc]_stat family of functions ARM: samsung: usb-ohci: move inline before return type video: fbdev: omap: move inline before return type video: fbdev: intelfb: move inline before return type USB: serial: safe_serial: move __inline__ before return type drivers: tty: serial: move inline before return type drivers: s390: move static and inline before return type x86/efi: move asmlinkage before return type sh: move inline before return type MIPS: SMP: move asmlinkage before return type m68k: coldfire: move inline before return type ia64: sn: pci: move inline before type ia64: move inline before return type FRV: tlbflush: move asmlinkage before return type CRIS: gpio: move inline before return type ARM: HP Jornada 7XX: move inline before return type ARM: KVM: move asmlinkage before type checkpatch: improve the STORAGE_CLASS test mm, migration: do not trigger OOM killer when migrating memory drm/i915: use __GFP_RETRY_MAYFAIL ... |
||
|
Linus Torvalds
|
3a00be1923 |
RTC for 4.13
Subsystem:
- expose non volatile RAM using nvmem instead of open coding in many
drivers. Unfortunately, this option has to be enabled by default to not
break existing users.
- rtctest can now test for cutoff dates, showing when an RTC will start
failing to properly save time and date.
- new RTC registration functions to remove race conditions in drivers
Newly supported RTCs:
- Broadcom STB wake-timer
- Epson RX8130CE
- Maxim IC DS1308
- STMicroelectronics STM32H7
Drivers:
- ds1307: use regmap, use nvmem, more cleanups
- ds3232: temperature reading support
- gemini: renamed to ftrtc010
- m41t80: use CCF to expose the clock
- rv8803: use nvmem
- s3c: many cleanups
- st-lpc: fix y2106 bug
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAllnMUIACgkQAyWl4gNJ
NJJGNxAAqMTrggkF6KTvFCVAoMHdkeAxuoyigwCH8BCm2gOm5Qj8ZodZxndcl3Gb
dWG+c1pHf4KXrz59h6ZGI4qFgIpCyJpjGpyJs0Pvt6gY7YIqHrEa1nvcrPO7DaWw
fPPcszyiymDOsb6d+wJzriA2ISJUHy7Kf6FUb0fjQLoYNl7ezgzdV6+dvePOPcW1
kaAfRX8XqrkECrDFFHlX1Szb78qGhcUB1TmWFW+hadICTguBLX/fro0DKWRw2POQ
y3cHKqMzFhTD1+jkp26o535x/D9CWDXzLmLvRF5tBQ0X7V2UIGchj4aNEHT0Ruwx
YlGzB3WDwfj/Jl+VALmY27mplf71z5ppJRhaFn84OWrJmvjS/2EF9TCCBc4XvzzX
dH/5nvPyNrUYnayTTCXiPhN3p4ivywHXqA9gkHcWb3BagNIpuvwNVnJT/Sxz3Y5R
Gt2zGl07NKQ1EtEThQEIBOMXy9nJ2PVJdQFmLehj1PfxX+Gbs42tWBILzl4n1rgT
yUFLMGw1Y0/h39jw7t+uKM7v0aXPHOXLrwaDKIj+c4ffVXD8IALhgG7BL4dOQPSF
rRPKi5QNYJMnuBeKHJrFlq7xWqHRVUfTFh16eyYvwGLGWiUuGe9akhlabl6bE8jG
fm3TlHPNieGMObXijwEVePkY6z7E0CLE+d1iQsDK6ZgO/z3pdOo=
=QDxE
-----END PGP SIGNATURE-----
Merge tag 'rtc-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Here is the pull-request for the RTC subsystem for 4.13.
Subsystem:
- expose non volatile RAM using nvmem instead of open coding in many
drivers. Unfortunately, this option has to be enabled by default to
not break existing users.
- rtctest can now test for cutoff dates, showing when an RTC will
start failing to properly save time and date.
- new RTC registration functions to remove race conditions in drivers
Newly supported RTCs:
- Broadcom STB wake-timer
- Epson RX8130CE
- Maxim IC DS1308
- STMicroelectronics STM32H7
Drivers:
- ds1307: use regmap, use nvmem, more cleanups
- ds3232: temperature reading support
- gemini: renamed to ftrtc010
- m41t80: use CCF to expose the clock
- rv8803: use nvmem
- s3c: many cleanups
- st-lpc: fix y2106 bug"
* tag 'rtc-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (51 commits)
rtc: Remove wrong deprecation comment
nvmem: include linux/err.h from header
rtc: st-lpc: make it robust against y2038/2106 bug
rtc: rtctest: add check for problematic dates
tools: timer: add rtctest_setdate
rtc: ds1307: remove ds1307_remove
rtc: ds1307: use generic nvmem
rtc: ds1307: switch to rtc_register_device
rtc: rv8803: remove rv8803_remove
rtc: rv8803: use generic nvmem support
rtc: rv8803: switch to rtc_register_device
rtc: add generic nvmem support
rtc: at91rm9200: remove race condition
rtc: introduce new registration method
rtc: class separate id allocation from registration
rtc: class separate device allocation from registration
rtc: stm32: add STM32H7 RTC support
dt-bindings: rtc: stm32: add support for STM32H7
rtc: ds1307: add ds1308 variant
rtc: ds3232: add temperature support
...
|
||
|
Linus Torvalds
|
edaf382518 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller: 1) Fix 64-bit division in mlx5 IPSEC offload support, from Ilan Tayari and Arnd Bergmann. 2) Fix race in statistics gathering in bnxt_en driver, from Michael Chan. 3) Can't use a mutex in RCU reader protected section on tap driver, from Cong WANG. 4) Fix mdb leak in bridging code, from Eduardo Valentin. 5) Fix free of wrong pointer variable in nfp driver, from Dan Carpenter. 6) Buffer overflow in brcmfmac driver, from Arend van SPriel. 7) ioremap_nocache() return value needs to be checked in smsc911x driver, from Alexey Khoroshilov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (34 commits) net: stmmac: revert "support future possible different internal phy mode" sfc: don't read beyond unicast address list datagram: fix kernel-doc comments socket: add documentation for missing elements smsc911x: Add check for ioremap_nocache() return code brcmfmac: fix possible buffer overflow in brcmf_cfg80211_mgmt_tx() net: hns: Bugfix for Tx timeout handling in hns driver net: ipmr: ipmr_get_table() returns NULL nfp: freeing the wrong variable mlxsw: spectrum_switchdev: Check status of memory allocation mlxsw: spectrum_switchdev: Remove unused variable mlxsw: spectrum_router: Fix use-after-free in route replace mlxsw: spectrum_router: Add missing rollback samples/bpf: fix a build issue bridge: mdb: fix leak on complete_info ptr on fail path tap: convert a mutex to a spinlock cxgb4: fix BUG() on interrupt deallocating path of ULD qed: Fix printk option passed when printing ipv6 addresses net: Fix minor code bug in timestamping.txt net: stmmac: Make 'alloc_dma_[rt]x_desc_resources()' look even closer ... |
||
Michal Hocko
|
dcda9b0471 |
mm, tree wide: replace __GFP_REPEAT by __GFP_RETRY_MAYFAIL with more useful semantic
__GFP_REPEAT was designed to allow retry-but-eventually-fail semantic to the page allocator. This has been true but only for allocations requests larger than PAGE_ALLOC_COSTLY_ORDER. It has been always ignored for smaller sizes. This is a bit unfortunate because there is no way to express the same semantic for those requests and they are considered too important to fail so they might end up looping in the page allocator for ever, similarly to GFP_NOFAIL requests. Now that the whole tree has been cleaned up and accidental or misled usage of __GFP_REPEAT flag has been removed for !costly requests we can give the original flag a better name and more importantly a more useful semantic. Let's rename it to __GFP_RETRY_MAYFAIL which tells the user that the allocator would try really hard but there is no promise of a success. This will work independent of the order and overrides the default allocator behavior. Page allocator users have several levels of guarantee vs. cost options (take GFP_KERNEL as an example) - GFP_KERNEL & ~__GFP_RECLAIM - optimistic allocation without _any_ attempt to free memory at all. The most light weight mode which even doesn't kick the background reclaim. Should be used carefully because it might deplete the memory and the next user might hit the more aggressive reclaim - GFP_KERNEL & ~__GFP_DIRECT_RECLAIM (or GFP_NOWAIT)- optimistic allocation without any attempt to free memory from the current context but can wake kswapd to reclaim memory if the zone is below the low watermark. Can be used from either atomic contexts or when the request is a performance optimization and there is another fallback for a slow path. - (GFP_KERNEL|__GFP_HIGH) & ~__GFP_DIRECT_RECLAIM (aka GFP_ATOMIC) - non sleeping allocation with an expensive fallback so it can access some portion of memory reserves. Usually used from interrupt/bh context with an expensive slow path fallback. - GFP_KERNEL - both background and direct reclaim are allowed and the _default_ page allocator behavior is used. That means that !costly allocation requests are basically nofail but there is no guarantee of that behavior so failures have to be checked properly by callers (e.g. OOM killer victim is allowed to fail currently). - GFP_KERNEL | __GFP_NORETRY - overrides the default allocator behavior and all allocation requests fail early rather than cause disruptive reclaim (one round of reclaim in this implementation). The OOM killer is not invoked. - GFP_KERNEL | __GFP_RETRY_MAYFAIL - overrides the default allocator behavior and all allocation requests try really hard. The request will fail if the reclaim cannot make any progress. The OOM killer won't be triggered. - GFP_KERNEL | __GFP_NOFAIL - overrides the default allocator behavior and all allocation requests will loop endlessly until they succeed. This might be really dangerous especially for larger orders. Existing users of __GFP_REPEAT are changed to __GFP_RETRY_MAYFAIL because they already had their semantic. No new users are added. __alloc_pages_slowpath is changed to bail out for __GFP_RETRY_MAYFAIL if there is no progress and we have already passed the OOM point. This means that all the reclaim opportunities have been exhausted except the most disruptive one (the OOM killer) and a user defined fallback behavior is more sensible than keep retrying in the page allocator. [akpm@linux-foundation.org: fix arch/sparc/kernel/mdesc.c] [mhocko@suse.com: semantic fix] Link: http://lkml.kernel.org/r/20170626123847.GM11534@dhcp22.suse.cz [mhocko@kernel.org: address other thing spotted by Vlastimil] Link: http://lkml.kernel.org/r/20170626124233.GN11534@dhcp22.suse.cz Link: http://lkml.kernel.org/r/20170623085345.11304-3-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Alex Belits <alex.belits@cavium.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: David Daney <david.daney@cavium.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: NeilBrown <neilb@suse.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Luis R. Rodriguez
|
7c43a657a4 |
test_sysctl: test against int proc_dointvec() array support
Add a few initial respective tests for an array: o Echoing values separated by spaces works o Echoing only first elements will set first elements o Confirm PAGE_SIZE limit still applies even if an array is used Link: http://lkml.kernel.org/r/20170630224431.17374-7-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Luis R. Rodriguez
|
2920fad3a5 |
test_sysctl: add simple proc_douintvec() case
Test against a simple proc_douintvec() case. While at it, add a test against UINT_MAX. Make sure UINT_MAX works, and UINT_MAX+1 will fail and that negative values are not accepted. Link: http://lkml.kernel.org/r/20170630224431.17374-6-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Luis R. Rodriguez
|
eb965eda1c |
test_sysctl: add simple proc_dointvec() case
Test against a simple proc_dointvec() case. While at it, add a test against INT_MAX. Make sure INT_MAX works, and INT_MAX+1 will fail. Also test negative values work. Link: http://lkml.kernel.org/r/20170630224431.17374-5-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Luis R. Rodriguez
|
1c0357c846 |
test_sysctl: test against PAGE_SIZE for int
Add the following tests to ensure we do not regress:
o Test using a buffer full of space (PAGE_SIZE-1) followed by a
single digit works
o Test using a buffer full of spaces (PAGE_SIZE or over) will fail
As tests increase instead of unloading the module and reloading it we
can just do a shell reset_vals() with a reset to values we know are set
at init on the driver.
Link: http://lkml.kernel.org/r/20170630224431.17374-4-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Luis R. Rodriguez
|
64b671204a |
test_sysctl: add generic script to expand on tests
This adds a generic script to let us more easily add more tests cases.
Since we really have only two types of tests cases just fold them into
the one file. Each test unit is now identified into its separate
function:
# ./sysctl.sh -l
Test ID list:
TEST_ID x NUM_TEST
TEST_ID: Test ID
NUM_TESTS: Number of recommended times to run the test
0001 x 1 - tests proc_dointvec_minmax()
0002 x 1 - tests proc_dostring()
For now we start off with what we had before, and run only each test
once. We can now watch a test case until it fails:
./sysctl.sh -w 0002
We can also run a test case x number of times, say we want to run a test
case 100 times:
./sysctl.sh -c 0001 100
To run a test case only once, for example:
./sysctl.sh -s 0002
The default settings are specified at the top of sysctl.sh.
Link: http://lkml.kernel.org/r/20170630224431.17374-3-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
|
Luis R. Rodriguez
|
9308f2f9e7 |
test_sysctl: add dedicated proc sysctl test driver
The existing tools/testing/selftests/sysctl/ tests include two test cases, but these use existing production kernel sysctl interfaces. We want to expand test coverage but we can't just be looking for random safe production values to poke at, that's just insane! Instead just dedicate a test driver for debugging purposes and port the existing scripts to use it. This will make it easier for further tests to be added. Subsequent patches will extend our test coverage for sysctl. The stress test driver uses a new license (GPL on Linux, copyleft-next outside of Linux). Linus was fine with this [0] and later due to Ted's and Alans's request ironed out an "or" language clause to use [1] which is already present upstream. [0] https://lkml.kernel.org/r/CA+55aFyhxcvD+q7tp+-yrSFDKfR0mOHgyEAe=f_94aKLsOu0Og@mail.gmail.com [1] https://lkml.kernel.org/r/1495234558.7848.122.camel@linux.intel.com Link: http://lkml.kernel.org/r/20170630224431.17374-2-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Acked-by: Kees Cook <keescook@chromium.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Arnaldo Carvalho de Melo
|
4b1303d0b0 |
perf symbols: Accept zero as the kernel base address
Which is the case in S/390, where symbols were not being resolved because machine__get_kernel_start was only setting machine->kernel_start when the just successfully loaded kernel symtab had its map->start set to !0, when it was left at (1ULL << 63) assuming a partitioning of the address space for user/kernel, which is not the case in S/390 nor in Sparc. So just check if map__load() was successfull and set machine->kernel_start to zero, fixing kernel symbol resolution on S/390. Test performed by Thomas: ---- I like this patch. I have done a new build and removed all my debug output to start from scratch. Without your patch I get this: # Samples: 4 of event 'cpu-clock' # Event count (approx.): 1000000 # # Children Self Command Shared Object Symbol # ........ ........ ....... ................ ........................ 75.00% 0.00% true [unknown] [k] 0x00000000004bedda | ---0x4bedda | |--50.00%--0x42693a | | | --25.00%--0x2a72e0 | 0x2af0ca | 0x3d1003fe4c0 | --25.00%--0x4272bc 0x26fa84 and with your patch (I just rebuilt the perf tool, nothing else and used the same perf.data file as input): # Samples: 4 of event 'cpu-clock' # Event count (approx.): 1000000 # # Children Self Command Shared Object Symbol # ........ ........ ....... .......................... .................................. 75.00% 0.00% true [kernel.vmlinux] [k] pgm_check_handler | ---pgm_check_handler do_dat_exception handle_mm_fault __handle_mm_fault filemap_map_pages | |--25.00%--rcu_read_lock_held | rcu_lockdep_current_cpu_online | 0x3d1003ff4c0 | --25.00%--lock_release Looks good to me.... ---- Reported-and-Tested-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com> Link: http://lkml.kernel.org/n/tip-dk0n1uzmbe0tbthrpfqlx6bz@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Yonghong Song
|
533350227d |
samples/bpf: fix a build issue
With latest net-next:
====
clang -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/6.3.1/include -I./arch/x86/include -I./arch/x86/include/generated/uapi -I./arch/x86/include/generated -I./include -I./arch/x86/include/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/kconfig.h -Isamples/bpf \
-D__KERNEL__ -D__ASM_SYSREG_H -Wno-unused-value -Wno-pointer-sign \
-Wno-compare-distinct-pointer-types \
-Wno-gnu-variable-sized-type-not-at-end \
-Wno-address-of-packed-member -Wno-tautological-compare \
-Wno-unknown-warning-option \
-O2 -emit-llvm -c samples/bpf/tcp_synrto_kern.c -o -| llc -march=bpf -filetype=obj -o samples/bpf/tcp_synrto_kern.o
samples/bpf/tcp_synrto_kern.c:20:10: fatal error: 'bpf_endian.h' file not found
^~~~~~~~~~~~~~
1 error generated.
====
net has the same issue.
Add support for ntohl and htonl in tools/testing/selftests/bpf/bpf_endian.h.
Also move bpf_helpers.h from samples/bpf to selftests/bpf and change
compiler include logic so that programs in samples/bpf can access the headers
in selftests/bpf, but not the other way around.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
||
Jin Yao
|
80f62589fa |
perf annotate: Fix broken arrow at row 0 connecting jmp instruction to its target
When the jump instruction is displayed at the row 0 in annotate view,
the arrow is broken. An example:
16.86 │ ┌──je 82
0.01 │ movsd (%rsp),%xmm0
│ movsd 0x8(%rsp),%xmm4
│ movsd 0x8(%rsp),%xmm1
│ movsd (%rsp),%xmm3
│ divsd %xmm4,%xmm0
│ divsd %xmm3,%xmm1
│ movsd (%rsp),%xmm2
│ addsd %xmm1,%xmm0
│ addsd %xmm2,%xmm0
│ movsd %xmm0,(%rsp)
│82: sub $0x1,%ebx
83.03 │ ↑ jne 38
│ add $0x10,%rsp
│ xor %eax,%eax
│ pop %rbx
│ ← retq
The patch increments the row number before checking with 0.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Arnaldo Carvalho de Melo
|
ede5626d30 |
perf evsel: State in the default event name if attr.exclude_kernel is set
When no event is specified perf will use the "cycles" hardware event with the highest precision available in the processor, and excluding kernel events for non-root users, so make that clear in the event name by setting the "u" event modifier, i.e. "cycles:upp". E.g.: The default for root: # perf record usleep 1 # perf evlist -v cycles:ppp: ..., precise_ip: 3, exclude_kernel: 0, ... # And for !root: $ perf record usleep 1 $ perf evlist -v cycles:uppp: ... , precise_ip: 3, exclude_kernel: 1, ... $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-lf29zcdl422i9knrgde0uwy3@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
d37a369790 |
perf evsel: Fix attr.exclude_kernel setting for default cycles:p
To allow probing the max attr.precise_ip setting for non-root users
we unconditionally set attr.exclude_kernel, which makes the detection
work but should be done only for !root, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes:
|
||
Benjamin Gaignard
|
69c31226fc |
rtc: rtctest: add check for problematic dates
Some dates could be problematic because they reach the limits of RTC hardware capabilities. This patch add various of them but since it will change RTC date it will be activated only when 'd' args is set. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> |
||
|
Benjamin Gaignard
|
c96396f078 |
tools: timer: add rtctest_setdate
This tool allow to set directly the time and date to a RTC device. Unlike other tools isn't doens't use "struct timeval" or "time_t" so it is safe for 32bits platforms when testing for y2038/2106 bug. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> |
||
|
Linus Torvalds
|
c3931a87db |
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A couple of fixes for perf and kprobes:
- Add he missing exclude_kernel attribute for the precise_ip level so
!CAP_SYS_ADMIN users get the proper results.
- Warn instead of failing completely when perf has no unwind support
for a particular architectiure built in.
- Ensure that jprobes are at function entry and not at some random
place"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kprobes: Ensure that jprobe probepoints are at function entry
kprobes: Simplify register_jprobes()
kprobes: Rename [arch_]function_offset_within_entry() to [arch_]kprobe_on_func_entry()
perf unwind: Do not fail due to missing unwind support
perf evsel: Set attr.exclude_kernel when probing max attr.precise_ip
|
||
|
Linus Torvalds
|
19bf2e0ef1 |
Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Thomas Gleixner: "A fix to the objtool sibling call detection logic to distinguish normal jumps inside a function from a real sibling call" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix sibling call detection logic |
||
Masami Hiramatsu
|
8cb0bc9e3f |
selftests/ftrace: Add a testcase for kprobe event naming
Add a testcase for kprobe event naming. This testcase checks whether the kprobe events can automatically ganerate its event name on normal function and dot-suffixed function. Also it checks whether the kprobe events can correctly define new event with given event name and group name. Link: http://lkml.kernel.org/r/61ae96fd1fcd14ee652c8b6525c218b8661bb0d2.1499453040.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> [Updated tests to use vfs_read and symbols with '.isra.', added check for kprobe_events and a command to clear it on exit, various additional checks and tests] Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
Naveen N. Rao
|
ff431b1390 |
selftests/ftrace: Add a test to probe module functions
Add a kprobes test to ensure that we are able to add a probe on a module function using 'p <mod>:<func>' format, with/without having to specify a probe name. Link: http://lkml.kernel.org/r/2d8087e25a7ad9206f3e2b7b4bb0c3c86eaa38af.1499453040.git.naveen.n.rao@linux.vnet.ibm.com Suggested-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
|
Naveen N. Rao
|
f7181e5aaa |
selftests/ftrace: Update multiple kprobes test for powerpc
KPROBES_ON_FTRACE is only available on powerpc64le. Update comment to clarify this. Also, we should use an offset of 8 to ensure that the probe does not fall on ftrace location. The current offset of 4 will fall before the function local entry point and won't fire, while an offset of 12 or 16 will fall on ftrace location. Offset 8 is currently guaranteed to not be the ftrace location. Link: http://lkml.kernel.org/r/3d32e8fa076070e83527476fdfa3a747bb9a1a3a.1499453040.git.naveen.n.rao@linux.vnet.ibm.com Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
Josh Poimboeuf
|
4855022a52 |
objtool: Fix sibling call detection logic
With some configs, objtool reports the following warning: arch/x86/kernel/ftrace.o: warning: objtool: ftrace_modify_code_direct()+0x2d: sibling call from callable instruction with modified stack frame The instruction it's complaining about isn't actually a sibling call. It's just a normal jump to an address inside the function. Objtool thought it was a sibling call because the instruction's jump_dest wasn't initialized because the function was supposed to be ignored due to its use of sync_core(). Objtool ended up validating the function instead of ignoring it because it didn't properly recognize a sibling call to the function. So fix the sibling call logic. Also add a warning to catch ignored functions being validated so we'll get a more useful error message next time. Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/96cc8ecbcdd8cb29ddd783817b4af918a6a171b0.1499437107.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
||
|
Linus Torvalds
|
58f051fc98 |
Kbuild updates for v4.13
- Clean up Makefiles and scripts - Improve clang support - Remove unneeded genhdr-y syntax - Remove unneeded cc-option-align macro - Introduce __cc-option macro and use it to fix x86 boot code compiler flags -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZXrlEAAoJED2LAQed4NsGOQ0P/ic6kvcXoquvO47NeZeGgprN Ffy7yt06ZpKE6ntKT2YGf8vIkBADAnGBmP9lFga7JRTFrBS/4fDCEoosjb7a7yYG 6QZ2CCVkpyUt5rizSFPiQ2A1EIsIvhQEHBGdE3upbX4dC6or/MRwWnyudYvFQYWc Ft5VGqENHxVIMCPm5pmNrZH4lOUv13KFlEWHFozPtwKXYIp8KZw88kJVJODPOuhM yWuXEkcg9f+SEjNeSn7uZ0P4JGDqeQz16EKW4/cMdERaqtb5diPNhUBIQ9X5qjR+ wQg//tMFKjveKPr8bNHnzjHCwz7xto0GBnqYoXQO4cxMm7heNeFWAS09YnDd58JS hb3BCF3QpojaLQUFb/elo8Gaolx4FepKVnvbCCV03TJCB3zyKTSaAx0cJxoRCajd iR5FEUDA0pacM6380ifYEWUu98LgWxhJfrcQuJ1F+g3/8uoMqLIIpC7YsdnEGzy2 Zhcz+Id5YMBla4w9ceUf9Zm+scCNxySWkANYPxC+QxwtNnDU5JrNhOnMXO/x4BEm rBICh3jY1gJRD/nuQ3L0XXX9taXD+z19DBsngt2XgVX6ec0EitZEkoR/f1yIrCNB zFfOeM2KD7Rg4iAzmE/L1clwJufXbZbRNKJjg5o2/1t2+TgRCnYNkCzCbr/Kqi8a ugje+BAynfUrARSJH1Uk =0ZOV -----END PGP SIGNATURE----- Merge tag 'kbuild-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Clean up Makefiles and scripts - Improve clang support - Remove unneeded genhdr-y syntax - Remove unneeded cc-option-align macro - Introduce __cc-option macro and use it to fix x86 boot code compiler flags * tag 'kbuild-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: improve comments on KBUILD_SRC x86/build: Specify stack alignment for clang x86/build: Use __cc-option for boot code compiler options kbuild: Add __cc-option macro kbuild: remove cc-option-align kbuild: replace genhdr-y with generated-y kbuild: clang: Disable 'address-of-packed-member' warning kbuild: remove duplicated arch/*/include/generated/uapi include path kbuild: speed up checksyscalls.sh kbuild: simplify silent build (-s) detection |
||
|
Linus Torvalds
|
ef3ad0898a |
linux-kselftest-4.13-rc1-update
This update consists of:
-- TAP13 framework and changes to some tests to convert to TAP13.
Converting kselftest output to standard format will help identify
run to run differences and pin point failures easily. TAP13 format
has been in use for several years and the output is human friendly.
Please find the specification:
https://testanything.org/tap-version-13-specification.html
Credit goes to Tim Bird for recommending TAP13 as a suitable format,
and to Grag KH for kick starting the work with help from Paul Elder
and Alice Ferrazzi
The first phase of the TAp13 conversion is included in this update.
Future updates will include updates to rest of the tests.
-- Masami Hiramatsu fixed ftrace to run on 4.9 stable kernels.
-- Kselftest documnetation has been converted to ReST format. Document
now has a new home under Documentation/dev-tools.
-- kselftest_harness.h is now available for general use as a result of
Mickaël Salaün's work.
-- Several fixes to skip and/or fail tests gracefully on older releases.
-----BEGIN PGP SIGNATURE-----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=j1Um
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.13-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"This update consists of:
- TAP13 framework and changes to some tests to convert to TAP13.
Converting kselftest output to standard format will help identify
run to run differences and pin point failures easily. TAP13 format
has been in use for several years and the output is human friendly.
Please find the specification:
https://testanything.org/tap-version-13-specification.html
Credit goes to Tim Bird for recommending TAP13 as a suitable
format, and to Grag KH for kick starting the work with help from
Paul Elder and Alice Ferrazzi
The first phase of the TAp13 conversion is included in this update.
Future updates will include updates to rest of the tests.
- Masami Hiramatsu fixed ftrace to run on 4.9 stable kernels.
- Kselftest documnetation has been converted to ReST format. Document
now has a new home under Documentation/dev-tools.
- kselftest_harness.h is now available for general use as a result of
Mickaël Salaün's work.
- Several fixes to skip and/or fail tests gracefully on older
releases"
* tag 'linux-kselftest-4.13-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (48 commits)
selftests: membarrier: use ksft_* var arg msg api
selftests: breakpoints: breakpoint_test_arm64: convert test to use TAP13
selftests: breakpoints: step_after_suspend_test use ksft_* var arg msg api
selftests: breakpoint_test: use ksft_* var arg msg api
kselftest: add ksft_print_msg() function to output general information
kselftest: make ksft_* output functions variadic
selftests/capabilities: Fix the test_execve test
selftests: intel_pstate: add .gitignore
selftests: fix memory-hotplug test
selftests: add missing test name in memory-hotplug test
selftests: check percentage range for memory-hotplug test
selftests: check hot-pluggagble memory for memory-hotplug test
selftests: typo correction for memory-hotplug test
selftests: ftrace: Use md5sum to take less time of checking logs
tools/testing/selftests/sysctl: Add pre-check to the value of writes_strict
kselftest.rst: do some adjustments after ReST conversion
selftest/net/Makefile: Specify output with $(OUTPUT)
selftest/intel_pstate/aperf: Use LDLIBS instead of LDFLAGS
selftest/memfd/Makefile: Fix build error
selftests: lib: Skip tests on missing test modules
...
|
||
|
Linus Torvalds
|
d691b7e7d1 |
powerpc updates for 4.13
Highlights include: - Support for STRICT_KERNEL_RWX on 64-bit server CPUs. - Platform support for FSP2 (476fpe) board - Enable ZONE_DEVICE on 64-bit server CPUs. - Generic & powerpc spin loop primitives to optimise busy waiting - Convert VDSO update function to use new update_vsyscall() interface - Optimisations to hypercall/syscall/context-switch paths - Improvements to the CPU idle code on Power8 and Power9. As well as many other fixes and improvements. Thanks to: Akshay Adiga, Andrew Donnellan, Andrew Jeffery, Anshuman Khandual, Anton Blanchard, Balbir Singh, Benjamin Herrenschmidt, Christophe Leroy, Christophe Lombard, Colin Ian King, Dan Carpenter, Gautham R. Shenoy, Hari Bathini, Ian Munsie, Ivan Mikhaylov, Javier Martinez Canillas, Madhavan Srinivasan, Masahiro Yamada, Matt Brown, Michael Neuling, Michal Suchanek, Murilo Opsfelder Araujo, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pavel Machek, Russell Currey, Santosh Sivaraj, Stephen Rothwell, Thiago Jung Bauermann, Yang Li. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZXyPCAAoJEFHr6jzI4aWAI9QQAISf2x5y//cqCi4ISyQB5pTq KLS/yQajNkQOw7c0fzBZOaH5Xd/SJ6AcKWDg8yDlpDR3+sRRsr98iIRECgKS5I7/ DxD9ywcbSoMXFQQo1ZMCp5CeuMUIJRtugBnUQM+JXCSUCPbznCY5DchDTLyTBTpO MeMVhI//JxthhoOMA9MudiEGaYCU9ho442Z4OJUSiLUv8WRbvQX9pTqoc4vx1fxA BWf2mflztBVcIfKIyxIIIlDLukkMzix6gSYPMCbC7lzkbnU7JSqKiheJXjo1gJS2 ePHKDxeNR2/QP0g/j3aT/MR1uTt9MaNBSX3gANE1xQ9OoJ8m1sOtCO4gNbSdLWae eXhDnoiEp930DRZOeEioOItuWWoxFaMyYk3BMmRKV4QNdYL3y3TRVeL2/XmRGqYL Lxz4IY/x5TteFEJNGcRX90uizNSi8AaEXPF16pUk8Ctt6eH3ZSwPMv2fHeYVCMr0 KFlKHyaPEKEoztyzLcUR6u9QB56yxDN58bvLpd32AeHvKhqyxFoySy59x9bZbatn B2y8mmDItg860e0tIG6jrtplpOVvL8i5jla5RWFVoQDuxxrLAds3vG9JZQs+eRzx Fiic93bqeUAS6RzhXbJ6QQJYIyhE7yqpcgv7ME1W87SPef3HPBk9xlp3yIDwdA2z bBDvrRnvupusz8qCWrxe =w8rj -----END PGP SIGNATURE----- Merge tag 'powerpc-4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights include: - Support for STRICT_KERNEL_RWX on 64-bit server CPUs. - Platform support for FSP2 (476fpe) board - Enable ZONE_DEVICE on 64-bit server CPUs. - Generic & powerpc spin loop primitives to optimise busy waiting - Convert VDSO update function to use new update_vsyscall() interface - Optimisations to hypercall/syscall/context-switch paths - Improvements to the CPU idle code on Power8 and Power9. As well as many other fixes and improvements. Thanks to: Akshay Adiga, Andrew Donnellan, Andrew Jeffery, Anshuman Khandual, Anton Blanchard, Balbir Singh, Benjamin Herrenschmidt, Christophe Leroy, Christophe Lombard, Colin Ian King, Dan Carpenter, Gautham R. Shenoy, Hari Bathini, Ian Munsie, Ivan Mikhaylov, Javier Martinez Canillas, Madhavan Srinivasan, Masahiro Yamada, Matt Brown, Michael Neuling, Michal Suchanek, Murilo Opsfelder Araujo, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pavel Machek, Russell Currey, Santosh Sivaraj, Stephen Rothwell, Thiago Jung Bauermann, Yang Li" * tag 'powerpc-4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits) powerpc/Kconfig: Enable STRICT_KERNEL_RWX for some configs powerpc/mm/radix: Implement STRICT_RWX/mark_rodata_ro() for Radix powerpc/mm/hash: Implement mark_rodata_ro() for hash powerpc/vmlinux.lds: Align __init_begin to 16M powerpc/lib/code-patching: Use alternate map for patch_instruction() powerpc/xmon: Add patch_instruction() support for xmon powerpc/kprobes/optprobes: Use patch_instruction() powerpc/kprobes: Move kprobes over to patch_instruction() powerpc/mm/radix: Fix execute permissions for interrupt_vectors powerpc/pseries: Fix passing of pp0 in updatepp() and updateboltedpp() powerpc/64s: Blacklist rtas entry/exit from kprobes powerpc/64s: Blacklist functions invoked on a trap powerpc/64s: Un-blacklist system_call() from kprobes powerpc/64s: Move system_call() symbol to just after setting MSR_EE powerpc/64s: Blacklist system_call() and system_call_common() from kprobes powerpc/64s: Convert .L__replay_interrupt_return to a local label powerpc64/elfv1: Only dereference function descriptor for non-text symbols cxl: Export library to support IBM XSL powerpc/dts: Use #include "..." to include local DT powerpc/perf/hv-24x7: Aggregate result elements on POWER9 SMT8 ... |
||
|
Linus Torvalds
|
b6ffe9ba46 |
libnvdimm for 4.13
* Introduce the _flushcache() family of memory copy helpers and use them
for persistent memory write operations on x86. The _flushcache()
semantic indicates that the cache is either bypassed for the copy
operation (movnt) or any lines dirtied by the copy operation are
written back (clwb, clflushopt, or clflush).
* Extend dax_operations with ->copy_from_iter() and ->flush()
operations. These operations and other infrastructure updates allow
all persistent memory specific dax functionality to be pushed into
libnvdimm and the pmem driver directly. It also allows dax-specific
sysfs attributes to be linked to a host device, for example:
/sys/block/pmem0/dax/write_cache
* Add support for the new NVDIMM platform/firmware mechanisms introduced
in ACPI 6.2 and UEFI 2.7. This support includes the v1.2 namespace
label format, extensions to the address-range-scrub command set, new
error injection commands, and a new BTT (block-translation-table)
layout. These updates support inter-OS and pre-OS compatibility.
* Fix a longstanding memory corruption bug in nfit_test.
* Make the pmem and nvdimm-region 'badblocks' sysfs files poll(2)
capable.
* Miscellaneous fixes and small updates across libnvdimm and the nfit
driver.
Acknowledgements that came after the branch was pushed:
commit
|
||
|
Linus Torvalds
|
c136b84393 |
PPC:
- Better machine check handling for HV KVM - Ability to support guests with threads=2, 4 or 8 on POWER9 - Fix for a race that could cause delayed recognition of signals - Fix for a bug where POWER9 guests could sleep with interrupts pending. ARM: - VCPU request overhaul - allow timer and PMU to have their interrupt number selected from userspace - workaround for Cavium erratum 30115 - handling of memory poisonning - the usual crop of fixes and cleanups s390: - initial machine check forwarding - migration support for the CMMA page hinting information - cleanups and fixes x86: - nested VMX bugfixes and improvements - more reliable NMI window detection on AMD - APIC timer optimizations Generic: - VCPU request overhaul + documentation of common code patterns - kvm_stat improvements There is a small conflict in arch/s390 due to an arch-wide field rename. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.22 (GNU/Linux) iQEcBAABAgAGBQJZW4XTAAoJEL/70l94x66DkhMH/izpk54KI17PtyQ9VYI2sYeZ BWK6Kl886g3ij4pFi3pECqjDJzWaa3ai+vFfzzpJJ8OkCJT5Rv4LxC5ERltVVmR8 A3T1I/MRktSC0VJLv34daPC2z4Lco/6SPipUpPnL4bE2HATKed4vzoOjQ3tOeGTy dwi7TFjKwoVDiM7kPPDRnTHqCe5G5n13sZ49dBe9WeJ7ttJauWqoxhlYosCGNPEj g8ZX8+cvcAhVnz5uFL8roqZ8ygNEQq2mgkU18W8ZZKuiuwR0gdsG0gSBFNTdwIMK NoreRKMrw0+oLXTIB8SZsoieU6Qi7w3xMAMabe8AJsvYtoersugbOmdxGCr1lsA= =OD7H -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM updates from Paolo Bonzini: "PPC: - Better machine check handling for HV KVM - Ability to support guests with threads=2, 4 or 8 on POWER9 - Fix for a race that could cause delayed recognition of signals - Fix for a bug where POWER9 guests could sleep with interrupts pending. ARM: - VCPU request overhaul - allow timer and PMU to have their interrupt number selected from userspace - workaround for Cavium erratum 30115 - handling of memory poisonning - the usual crop of fixes and cleanups s390: - initial machine check forwarding - migration support for the CMMA page hinting information - cleanups and fixes x86: - nested VMX bugfixes and improvements - more reliable NMI window detection on AMD - APIC timer optimizations Generic: - VCPU request overhaul + documentation of common code patterns - kvm_stat improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (124 commits) Update my email address kvm: vmx: allow host to access guest MSR_IA32_BNDCFGS x86: kvm: mmu: use ept a/d in vmcs02 iff used in vmcs12 kvm: x86: mmu: allow A/D bits to be disabled in an mmu x86: kvm: mmu: make spte mmio mask more explicit x86: kvm: mmu: dead code thanks to access tracking KVM: PPC: Book3S: Fix typo in XICS-on-XIVE state saving code KVM: PPC: Book3S HV: Close race with testing for signals on guest entry KVM: PPC: Book3S HV: Simplify dynamic micro-threading code KVM: x86: remove ignored type attribute KVM: LAPIC: Fix lapic timer injection delay KVM: lapic: reorganize restart_apic_timer KVM: lapic: reorganize start_hv_timer kvm: nVMX: Check memory operand to INVVPID KVM: s390: Inject machine check into the nested guest KVM: s390: Inject machine check into the guest tools/kvm_stat: add new interactive command 'b' tools/kvm_stat: add new command line switch '-i' tools/kvm_stat: fix error on interactive command 'g' KVM: SVM: suppress unnecessary NMI singlestep on GIF=0 and nested exit ... |
||
Allen Hubbe
|
7c49c9855a |
NTB: ntb_test: add parameter for doorbell bitmask
If the test attempts to clear doorbell bits that are invalid for the hardware, then the test will fail. Provide a parameter to specify the doorbell bits to clear. Set default doorbell bits that work for XEON. Signed-off-by: Allen Hubbe <Allen.Hubbe@dell.com> Acked-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> |
||
|
Allen Hubbe
|
c2d42edb52 |
NTB: ntb_test: modprobe on remote host
Signed-off-by: Allen Hubbe <Allen.Hubbe@dell.com> Acked-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> |
||
|
Linus Torvalds
|
5518b69b76 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
"Reasonably busy this cycle, but perhaps not as busy as in the 4.12
merge window:
1) Several optimizations for UDP processing under high load from
Paolo Abeni.
2) Support pacing internally in TCP when using the sch_fq packet
scheduler for this is not practical. From Eric Dumazet.
3) Support mutliple filter chains per qdisc, from Jiri Pirko.
4) Move to 1ms TCP timestamp clock, from Eric Dumazet.
5) Add batch dequeueing to vhost_net, from Jason Wang.
6) Flesh out more completely SCTP checksum offload support, from
Davide Caratti.
7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
Neira Ayuso, and Matthias Schiffer.
8) Add devlink support to nfp driver, from Simon Horman.
9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
Prabhu.
10) Add stack depth tracking to BPF verifier and use this information
in the various eBPF JITs. From Alexei Starovoitov.
11) Support XDP on qed device VFs, from Yuval Mintz.
12) Introduce BPF PROG ID for better introspection of installed BPF
programs. From Martin KaFai Lau.
13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.
14) For loads, allow narrower accesses in bpf verifier checking, from
Yonghong Song.
15) Support MIPS in the BPF selftests and samples infrastructure, the
MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
Daney.
16) Support kernel based TLS, from Dave Watson and others.
17) Remove completely DST garbage collection, from Wei Wang.
18) Allow installing TCP MD5 rules using prefixes, from Ivan
Delalande.
19) Add XDP support to Intel i40e driver, from Björn Töpel
20) Add support for TC flower offload in nfp driver, from Simon
Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
Kicinski, and Bert van Leeuwen.
21) IPSEC offloading support in mlx5, from Ilan Tayari.
22) Add HW PTP support to macb driver, from Rafal Ozieblo.
23) Networking refcount_t conversions, From Elena Reshetova.
24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
for tuning the TCP sockopt settings of a group of applications,
currently via CGROUPs"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
cxgb4: Support for get_ts_info ethtool method
cxgb4: Add PTP Hardware Clock (PHC) support
cxgb4: time stamping interface for PTP
nfp: default to chained metadata prepend format
nfp: remove legacy MAC address lookup
nfp: improve order of interfaces in breakout mode
net: macb: remove extraneous return when MACB_EXT_DESC is defined
bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
bpf: fix return in load_bpf_file
mpls: fix rtm policy in mpls_getroute
net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
...
|