With CONFIG_PROC_FS=n and -Werror, 0-day reports:
drivers/video/fbdev/core/fbmem.c:736:36: error:
'proc_fb_seq_ops' defined but not used
Mark it as __maybe_unused.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210504142910.2084722-1-linux@roeck-us.net
Normally, an unused OSD id/slot is represented by an empty addrvec.
However, it also appears to be possible to generate an osdmap where
an unused OSD id/slot has an addrvec with a single blank address of
type NONE. Allow such addrvecs and make the end result be exactly
the same as for the empty addrvec case -- leave addr intact.
Cc: stable@vger.kernel.org # 5.11+
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
If the optional "clock-names" property is present, but the optional TXC
reference clock is not, "make dtbs_check" complains:
ethernet@e6800000: clock-names: ['fck'] is too short
Fix this by declaring that a single clock name is valid.
While at it, drop the superfluous upper limit on the number of clocks,
as it is implied by the list of descriptions.
Fixes: 6f43735b6d ("dt-bindings: net: renesas,etheravb: Add additional clocks")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/b3d91c9f70a15792ad19c87e4ea35fc876600fae.1620118901.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
Add driver for the SiFive FU740 PCIe host controller.
This controller is based on the DesignWare PCIe core.
Co-developed-by: Henry Styles <hes@sifive.com>
Co-developed-by: Erik Danie <erik.danie@sifive.com>
Co-developed-by: Greentime Hu <greentime.hu@sifive.com>
Link: https://lore.kernel.org/r/20210504105940.100004-6-greentime.hu@sifive.com
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Henry Styles <hes@sifive.com>
Signed-off-by: Erik Danie <erik.danie@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Commit a7d2475af7 ("powerpc: Sort the selects under CONFIG_PPC")
sorted all selects under CONFIG_PPC.
4 years later, several items have been introduced at wrong place,
a few other have been renamed without moving them to their correct
place.
Reorder them now.
While we are at it, simplify the test for a couple of them:
- PPC_64 && PPC_PSERIES is simplified in PPC_PSERIES
- PPC_64 && PPC_BOOK3S is simplified in PPC_BOOK3S_64
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/361ee3fc5009c709ae0ca592249bb0702c6ef073.1619024780.git.christophe.leroy@csgroup.eu
The fstests test case generic/475 creates a dm-linear device that gets
changed to a dm-error device. This leads to errors in loading the block
group's zone information when running on a zoned file system, ultimately
resulting in a list corruption. When running on a kernel with list
debugging enabled this leads to the following crash.
BTRFS: error (device dm-2) in cleanup_transaction:1953: errno=-5 IO failure
kernel BUG at lib/list_debug.c:54!
invalid opcode: 0000 [#1] SMP PTI
CPU: 1 PID: 2433 Comm: umount Tainted: G W 5.12.0+ #1018
RIP: 0010:__list_del_entry_valid.cold+0x1d/0x47
RSP: 0018:ffffc90001473df0 EFLAGS: 00010296
RAX: 0000000000000054 RBX: ffff8881038fd000 RCX: ffffc90001473c90
RDX: 0000000100001a31 RSI: 0000000000000003 RDI: 0000000000000003
RBP: ffff888308871108 R08: 0000000000000003 R09: 0000000000000001
R10: 3961373532383838 R11: 6666666620736177 R12: ffff888308871000
R13: ffff8881038fd088 R14: ffff8881038fdc78 R15: dead000000000100
FS: 00007f353c9b1540(0000) GS:ffff888627d00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f353cc2c710 CR3: 000000018e13c000 CR4: 00000000000006a0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
btrfs_free_block_groups+0xc9/0x310 [btrfs]
close_ctree+0x2ee/0x31a [btrfs]
? call_rcu+0x8f/0x270
? mutex_lock+0x1c/0x40
generic_shutdown_super+0x67/0x100
kill_anon_super+0x14/0x30
btrfs_kill_super+0x12/0x20 [btrfs]
deactivate_locked_super+0x31/0x90
cleanup_mnt+0x13e/0x1b0
task_work_run+0x63/0xb0
exit_to_user_mode_loop+0xd9/0xe0
exit_to_user_mode_prepare+0x3e/0x60
syscall_exit_to_user_mode+0x1d/0x50
entry_SYSCALL_64_after_hwframe+0x44/0xae
As dm-error has no support for zones, btrfs will run it's zone emulation
mode on this device. The zone emulation mode emulates conventional zones,
so bail out if the zone bitmap that gets populated on mount sees the zone
as sequential while we're thinking it's a conventional zone when creating
a block group.
Note: this scenario is unlikely in a real wold application and can only
happen by this (ab)use of device-mapper targets.
CC: stable@vger.kernel.org # 5.12+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The following test case reproduces an issue of wrongly freeing in-use
blocks on the readonly seed device when fstrim is called on the rw sprout
device. As shown below.
Create a seed device and add a sprout device to it:
$ mkfs.btrfs -fq -dsingle -msingle /dev/loop0
$ btrfstune -S 1 /dev/loop0
$ mount /dev/loop0 /btrfs
$ btrfs dev add -f /dev/loop1 /btrfs
BTRFS info (device loop0): relocating block group 290455552 flags system
BTRFS info (device loop0): relocating block group 1048576 flags system
BTRFS info (device loop0): disk added /dev/loop1
$ umount /btrfs
Mount the sprout device and run fstrim:
$ mount /dev/loop1 /btrfs
$ fstrim /btrfs
$ umount /btrfs
Now try to mount the seed device, and it fails:
$ mount /dev/loop0 /btrfs
mount: /btrfs: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error.
Block 5292032 is missing on the readonly seed device:
$ dmesg -kt | tail
<snip>
BTRFS error (device loop0): bad tree block start, want 5292032 have 0
BTRFS warning (device loop0): couldn't read-tree root
BTRFS error (device loop0): open_ctree failed
From the dump-tree of the seed device (taken before the fstrim). Block
5292032 belonged to the block group starting at 5242880:
$ btrfs inspect dump-tree -e /dev/loop0 | grep -A1 BLOCK_GROUP
<snip>
item 3 key (5242880 BLOCK_GROUP_ITEM 8388608) itemoff 16169 itemsize 24
block group used 114688 chunk_objectid 256 flags METADATA
<snip>
From the dump-tree of the sprout device (taken before the fstrim).
fstrim used block-group 5242880 to find the related free space to free:
$ btrfs inspect dump-tree -e /dev/loop1 | grep -A1 BLOCK_GROUP
<snip>
item 1 key (5242880 BLOCK_GROUP_ITEM 8388608) itemoff 16226 itemsize 24
block group used 32768 chunk_objectid 256 flags METADATA
<snip>
BPF kernel tracing the fstrim command finds the missing block 5292032
within the range of the discarded blocks as below:
kprobe:btrfs_discard_extent {
printf("freeing start %llu end %llu num_bytes %llu:\n",
arg1, arg1+arg2, arg2);
}
freeing start 5259264 end 5406720 num_bytes 147456
<snip>
Fix this by avoiding the discard command to the readonly seed device.
Reported-by: Chris Murphy <lists@colorremedies.com>
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 7c95d8893f ("powerpc: Change calling convention for
create_branch() et. al.") complexified the frame of function
do_feature_fixups(), leading to GCC setting up a stack
guard when CONFIG_STACKPROTECTOR is selected.
The problem is that do_feature_fixups() is called very early
while 'current' in r2 is not set up yet and the code is still
not at the final address used at link time.
So, like other instrumentation, stack protection needs to be
deactivated for feature-fixups.c and code-patching.c
Fixes: 7c95d8893f ("powerpc: Change calling convention for create_branch() et. al.")
Cc: stable@vger.kernel.org # v5.8+
Reported-by: Jonathan Neuschaefer <j.neuschaefer@gmx.net>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Jonathan Neuschaefer <j.neuschaefer@gmx.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b688fe82927b330349d9e44553363fa451ea4d95.1619715114.git.christophe.leroy@csgroup.eu
Trace memory is cleared and the corresponding dcache lines
are flushed after allocation. However, this should not be
done using the PFN. This adds the missing conversion to
virtual address.
Fixes: 2ac02e5ece ("powerpc/mm: Remove dcache flush from memory remove.")
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210501160254.1179831-1-sandipan@linux.ibm.com
kexec_file_load() uses initial_boot_params in setting up the device tree
for the kernel to be loaded. Though initial_boot_params holds info about
CPUs at the time of boot, it doesn't account for hot added CPUs.
So, kexec'ing with kexec_file_load() syscall leaves the kexec'ed kernel
with inaccurate CPU info.
If kdump kernel is loaded with kexec_file_load() syscall and the system
crashes on a hot added CPU, the capture kernel hangs failing to identify
the boot CPU, with no output.
To avoid this from happening, extract current CPU info from of_root
device node and use it for setting up the fdt in kexec_file_load case.
Fixes: 6ecd0163d3 ("powerpc/kexec_file: Add appropriate regions for memory reserve map")
Cc: stable@vger.kernel.org # v5.9+
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210429060256.199714-1-sourabhjain@linux.ibm.com
We use reset-simple in this patch so that pcie driver can use
devm_reset_control_get() to get this reset data structure and use
reset_control_deassert() to deassert pcie_power_up_rst_n.
Link: https://lore.kernel.org/r/20210504105940.100004-3-greentime.hu@sifive.com
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Stephen Boyd <sboyd@kernel.org>
We add pcie_aux clock in this patch so that pcie driver can use
clk_prepare_enable() and clk_disable_unprepare() to enable and disable
pcie_aux clock.
Link: https://lore.kernel.org/r/20210504105940.100004-2-greentime.hu@sifive.com
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
HP Envy AiO 32-a12xxx has an external amp that is controlled via GPIO
bit 0x04. However, unlike other devices, this amp seems to shut down
itself after the certain period, hence the OS needs to up/down the bit
dynamically only during the actual playback.
This patch adds the control of the GPIO bit via the existing pcm_hook
mechanism. Ideally it should be triggered at the actual stream start,
but we have only the state change at prepare/cleanup, so use those for
switching the GPIO bit on/off. This should be good enough for the
purpose, and was actually confirmed to work fine.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212873
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210504091802.13200-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It was reported that the headphone output on ASUS UX430UA (SSID
1043:1740) with ALC295 codec is silent while the speaker works.
After the investigation, it turned out that the DAC assignment has to
be fixed on this machine; unlike others, it expects DAC 0x02 to be
assigned to the speaker pin 0x07 while DAC 0x03 to headphone pin
0x21.
This patch provides a fixup for the fixed DAC/pin mapping for this
device.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212933
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210504082057.6913-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When switching virtio_pci_modern to use a helper for mappings we lost an
__iomem tag. Restore it.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 9e3bb9b79a ("virtio_pci_modern: introduce helper to map vq notify area")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When switching virtio_pci_modern to use a helper for mappings we lost an
__iomem tag. We should restore it.
However, virtio_pci_modern is playing tricks by hiding an iomem pointer
in a regular vq->priv pointer. Which is okay as long as it's
all contained within a single file, but we need to __force cast
the value otherwise we'll get sparse warnings.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 7dca6c0ea9 ("virtio-pci library: switch to use vp_modern_map_vq_notify()")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Nothing can stop a host from submitting invalid commands. The target
just needs to respond with an appropriate status, but that's not a
target error. Demote invalid command messages to the debug level so
these events don't spam the kernel logs.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When a request finally completes in end_io() after it has failed over,
the bdev pointer can be stale and thus the system can crash. Set the
bdev back to ns head, so the request is map to an active path when
resubmitted.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
reset_work() in nvme-pci may hang forever in the following scenario:
1) A reset caused by a command timeout occurs due to a controller being
temporarily irresponsive.
2) nvme_reset_work() restarts admin queue at nvme_alloc_admin_tags(). At
the same time, a user-submitted admin command is queued and waiting
for completion. Then, reset_work() changes its state to CONNECTING,
and submits an identify command.
3) However, the controller does still not respond to any command,
causing a timeout being fired at the user-submitted command.
Unfortunately, nvme_timeout() does not see the completion on cq, and
any timeout that takes place under CONNECTING state causes a
controller shutdown.
4) Normally, the identify command in reset_work() would be canceled with
SC_HOST_ABORTED by nvme_dev_disable(), then reset_work can tear down
the controller accordingly. But the controller happens to return
online and respond the identify command before nvme_dev_disable()
should have been reaped it off.
5) reset_work() continues to setup_io_queues() as it observes no error
in init_identify(). However, the admin queue has already been
quiesced in dev_disable(). Thus, any following commands would be
blocked forever in blk_execute_rq().
This can be fixed by restricting usercmd commands when controller is not
in a LIVE state in nvme_queue_rq(), as what has been done previously in
fabrics.
```
nvme_reset_work(): |
nvme_alloc_admin_tags() |
| nvme_submit_user_cmd():
nvme_init_identify(): | ...
__nvme_submit_sync_cmd(): |
... | ...
---------------------------------------> nvme_timeout():
(Controller starts reponding commands) | nvme_dev_disable(, true):
nvme_setup_io_queues(): |
__nvme_submit_sync_cmd(): |
(hung in blk_execute_rq |
since run_hw_queue sees |
queue quiesced) |
```
Signed-off-by: Tao Chiu <taochiu@synology.com>
Signed-off-by: Cody Wong <codywong@synology.com>
Reviewed-by: Leon Chien <leonchien@synology.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
queue_rq() in pci only checks if the dispatched queue (nvmeq) is ready,
e.g. not being suspended. Since nvme_alloc_admin_tags() in reset flow
restarts the admin queue, users are able to submit admin commands to a
controller before reset_work() completes. Commands submitted under this
condition may interfere with commands that performs identify, IO queue
setup in reset_work(), and may result in a hang described in the
following patch.
As seen in the fabrics, user commands are prevented from being executed
under inproper controller states. We may reuse this logic to maintain a
clear admin queue during reset_work().
Signed-off-by: Tao Chiu <taochiu@synology.com>
Signed-off-by: Cody Wong <codywong@synology.com>
Reviewed-by: Leon Chien <leonchien@synology.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
nvme_clear_nvme_request() clears the nvme_command, which is unncessary
for passthrough requests as nvme_command is overwritten immediately.
Move clearing part from this helper to the caller, so that double memset
for passthrough requests is avoided.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In multipath case, we should consider namespace attachment with
controllers in a subsystem when we find out the live controller for the
namespace. This patch manually reverted the commit 3557a44097
("nvme: don't bother to look up a namespace for controller ioctls") with
few more updates to nvme_ns_head_chr_ioctl which has been newly updated.
Fixes: 3557a44097 ("nvme: don't bother to look up a namespace for
controller ioctls")
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Daniel Borkmann says:
====================
pull-request: bpf 2021-05-04
The following pull-request contains BPF updates for your *net* tree.
We've added 5 non-merge commits during the last 4 day(s) which contain
a total of 6 files changed, 52 insertions(+), 30 deletions(-).
The main changes are:
1) Fix libbpf overflow when processing BPF ring buffer in case of extreme
application behavior, from Brendan Jackman.
2) Fix potential data leakage of uninitialized BPF stack under speculative
execution, from Daniel Borkmann.
3) Fix off-by-one when validating xsk pool chunks, from Xuan Zhuo.
4) Fix snprintf BPF selftest with a pid filter to avoid racing its output
test buffer, from Florent Revest.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This reduces TLB misses by nearly 30x on a `git diff` workload on a
2-node POWER9 (59,800 -> 2,100) and reduces CPU cycles by 0.54%, due
to vfs hashes being allocated with 2MB pages.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210503091755.613393-1-npiggin@gmail.com
"make dtbs_check" complains:
arch/arm/boot/dts/r8a7779-marzen.dt.yaml: display@fff80000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
arch/arm64/boot/dts/renesas/r8a77970-v3msk.dt.yaml: display@feb00000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
arch/arm64/boot/dts/renesas/r8a77970-eagle.dt.yaml: display@feb00000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
arch/arm64/boot/dts/renesas/r8a77980-condor.dt.yaml: display@feb00000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dt.yaml: display@feb00000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
Fix this by documenting the power-domains property.
Fixes: 99d66127fa ("dt-bindings: display: renesas,du: Convert binding to YAML")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/600d42256515f180bc84b72e8bdb5c5d9126ab62.1619700459.git.geert+renesas@glider.be
Signed-off-by: Rob Herring <robh@kernel.org>
As I wanted to add John Hawley as a co-maintainer for ktest, I found that
there never was a KTEST section in the MAINTAINERS file. Add one!
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Perl, as with most scripting languages, is fairly flexible in how /
where you can define things, and it will (for the most part) do what you
would expect it to do. This however can lead to situations, like with
ktest, where things get muddled over time.
This pushes the variable definitions back up to the top, followed by
functions, with the main script executables down at the bottom, INSTEAD
of being somewhat mish-mashed together in certain places. This mostly
has the advantage of making it more obvious where things are initially
defined, what functions are there, and ACTUALLY where the main script
starts executing, and should make this a little more approachable.
Signed-off-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This cleans up some additional whitespace pieces that to be more
consistent, as well as moving a curly brace around, and some 'or'
statements to match the rest of the file (usually or goes at the
end of the line vs. at the beginning)
Signed-off-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This is a followup to "ktest: Adding editor hints to improve
consistency" to actually adjust the existing indentation to match
the, now, expected pattern (first column 4 spaces, 2nd tab, 3rd
tab + 4 spaces, etc). This should, at least help, keep things
consistent going forward now.
Signed-off-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Emacs and Vi(m) have different styles of dealing with perl syntax
which can lead to slightly inconsistent indentation, and makes the
code slightly harder to read. Emacs assumes a more perl recommended
standard of 4 spaces (1 column) or tab (two column) indentation.
Vi(m) tends to favor just normal spaces or tabs depending on what
was being used.
This gives the basic hinting to Emacs and Vim to do what is
expected to be basically consistent.
Emacs:
- Explicitly flip into perl mode, cperl would require
more adjustments
Vi(m):
- Set softtabs=4 which will flip it over to doing
indentation the way you would expect from Emacs
Signed-off-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
This duplicates the KVM/Qemu config with specific notes for how
to use it with VMware VMs on Workstation, Player, or Fusion.
The main thing to be aware of is how the serial port is exposed
which is a unix pipe, and will need something like ncat to get
into ktest's monitoring
Signed-off-by: John 'Warthog9' Hawley (VMware) <warthog9@eaglescrag.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
all `example` in this file should be replaced with ``example``.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Acked-by: Matthias Maennich <maennich@google.com>
Link: https://lore.kernel.org/r/20210428100720.1076276-1-siyanteng@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
