Update setting HW time-stamp to allow coexistence with CQE compression.
Turn on RX PTP indication and try to reopen the channels. On success,
coexistence with CQE compression is enabled. Otherwise, fall-back to
turning off CQE compression.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When opening PTP channel with MLX5E_PTP_STATE_RX set, add the
corresponding flow steering rules. Capture UDP packets with destination
port 319 and L2 packets with ethertype 0x88F7 and steer them into the RQ
of the PTP channel.
Add API that manages the flow steering rules to be used in the following
patches via safe_reopen_channels mechanism.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add a new FS API which captures the ANY traffic from the traffic
classifier into a dedicated FS table. The table consists of a group
matching the ethertype and a must-be-last group which contains a default
rule redirecting the unmatched packets back to the RSS logic.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add a new FS API which captures the UDP traffic from the traffic
classifier into a dedicated FS table. This API handles both UDP over
IPv4 and IPv6 in the same manner. The tables (one for UDPv4 and another
for UDPv6) consist of a group matching the UDP destination port and a
must-be-last group which contains a default rule redirecting the
unmatched packets back to the RSS logic.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Flow Steering levels are used to determine the order between the tables.
As of today, each one of these tables follows the TTC table, and hijacks
its traffic, and cannot be combined together for now. Putting them in
the same layer better reflects the situation.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When present, add the PTP RQ to the RX reporter.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Break RX diagnostics function into smaller helpers. This enables easier
enhancement in the next patch in the set.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add PTP-TIR and initiate its RQT to allow PTP-RQ to integrate into the
safe-reopen flow on configuration change. Add rx_ptp_support flag on a
profile and turn it on for ETH driver. With this flag set, create a
redirect-RQT for PTP-RQ.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Like PTP-TX, once the PTP-RX is opened, corresponding statistics appear.
Add indication that PTP-RX was ever opened: rx_ptp_opened. If any of the
PTP RX or TX were opened, display the PTP channel's statistics.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Enhance PTP channel to allow PTP without disabling CQE compression. Add
RQ, TIR and PTP_RX_STATE to PTP channel. When this bit is set, PTP
channel manages its RQ, and PTP traffic is directed to the PTP-RQ which
is not affected by compression.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add PTP TX state to PTP channel, which indicates the corresponding SQ is
available. Further patches in the set extend PTP channel to include RQ.
The PTP channel state will be used for separation and coexistence of RX
and TX PTP. Enhance conditions to verify the TX PTP state is set.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The command:
find ./include/linux/soc/qcom/ | xargs ./scripts/kernel-doc -none
reports:
./include/linux/soc/qcom/qmi.h:26: warning: cannot understand function prototype: 'struct qmi_header '
./include/linux/soc/qcom/qmi.h:101: warning: cannot understand function prototype: 'struct qmi_response_type_v01 '
./include/linux/soc/qcom/irq.h:19: warning: expecting prototype for QCOM specific IRQ domain flags that distinguishes the handling of wakeup(). Prototype was for IRQ_DOMAIN_FLAG_QCOM_PDC_WAKEUP() instead
./include/linux/soc/qcom/apr.h:126: warning: Function parameter or member '__apr_driver' not described in 'module_apr_driver'
./include/linux/soc/qcom/apr.h:126: warning: Excess function parameter '__aprbus_driver' description in 'module_apr_driver'
./include/linux/soc/qcom/llcc-qcom.h:43: warning: cannot understand function prototype: 'struct llcc_slice_desc '
./include/linux/soc/qcom/llcc-qcom.h:60: warning: cannot understand function prototype: 'struct llcc_edac_reg_data '
./include/linux/soc/qcom/llcc-qcom.h:86: warning: cannot understand function prototype: 'struct llcc_drv_data '
Address all those warnings by:
- prefixing kernel-doc descriptions for structs with the keyword 'struct',
- turning a kernel-doc comment that does not follow the kernel-doc syntax
into a normal comment, and
- correcting a parameter name in a kernel-doc comment.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20210327065642.11969-3-lukas.bulwahn@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The files in ./include/linux/soc/qcom/ are headers to the corresponding
files in ./drivers/soc/qcom/, which are assigned to ARM/QUALCOMM SUPPORT.
Possibly, the file pattern include/linux/*/qcom* intended to match this
directory and its containing files, but unfortunately, it does not.
Hence, add a file entry for this directory to ARM/QUALCOMM SUPPORT.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20210327065642.11969-2-lukas.bulwahn@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
sm8350 has 29 thermal sensors split across two tsens controllers. Add
the thermal zones to expose them and wireup the cpus to throttle their
frequencies on crossing passive temperature thresholds.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210324124308.1265626-2-robert.foss@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the first and third qupv3 nodes used to hook
up peripherals on some devices, as well as the iommus properties for all
of them.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Link: https://lore.kernel.org/r/20210321174522.123036-2-caleb@connolly.tech
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The variable biosaddr is being assigned a value that is never read, the
variable is redundant and can be safely removed.
Link: https://lore.kernel.org/r/20210325170731.484651-1-colin.king@canonical.com
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Apply these fixes to the newly added sm8250 display ndoes
- Remove "notused" interconnect (which apparently was blindly copied from
my old patches)
- Use dispcc node example from dt-bindings, removing clocks which aren't
documented or used by the driver and fixing the region size.
Fixes: 7c1dffd471 ("arm64: dts: qcom: sm8250.dtsi: add display system nodes")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
[DB: compatibility changes split into separate patch]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210329120051.3401567-2-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Variable err is assigned -ENOMEM followed by an error return path via label
err_udev that does not access the variable and returns with the -ENOMEM
error return code. The assignment to err is redundant and can be removed.
Link: https://lore.kernel.org/r/20210327230650.25803-1-colin.king@canonical.com
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
struct request and struct request_queue are declared twice. Remove the
duplicate declarations.
Link: https://lore.kernel.org/r/20210327030850.918018-1-wanjiabing@vivo.com
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Put child node before return to fix potential reference count leak.
Generally, the reference count of child is incremented and decremented
automatically in the macro for_each_available_child_of_node() and should
be decremented manually if the loop is broken in loop body.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Fixes: 335a127548 ("bus: qcom: add EBI2 driver")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210121114907.109267-1-bianpan2016@163.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Commit b43abcbbd5 ("scsi: fnic: Ratelimit printks to avoid flooding when
vlan is not set by the switch.i") added printk_ratelimit() in front of a
couple of debug-mode messages to reduce logging overrun when debugging the
driver. The code:
> if (printk_ratelimit())
> FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
> "Start VLAN Discovery\n");
ends up calling printk_ratelimit() quite often, triggering many kernel
messages about callbacks being supressed.
The fix is to decompose FNIC_FCS_DBG(), then change the order of checks so
that printk_ratelimit() is only called if driver debugging is enabled.
Link: https://lore.kernel.org/r/20210323172756.5743-1-lduncan@suse.com
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Perform logout of all remote ports so that all I/Os with driver are
requeued with midlayer for retry.
Link: https://lore.kernel.org/r/20210329085229.4367-12-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For the mailbox thread that encounters a PCIe error, pause that thread
until PCIe link reset/recovery has completed to prevent the thread from
possibly unmapping any type of DMA resource that might be in progress.
Link: https://lore.kernel.org/r/20210329085229.4367-10-njavali@marvell.com
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After RISC RESET, the poll time for completion is too short. Fix the
completion polling time.
Link: https://lore.kernel.org/r/20210329085229.4367-8-njavali@marvell.com
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On bsg command completion, bsg_job_done() was called while qla driver
continued to access the bsg_job buffer. bsg_job_done() would free up
resources that ended up being reused by other task while the driver
continued to access the buffers. As a result, driver was reading garbage
data.
localhost kernel: BUG: KASAN: use-after-free in sg_next+0x64/0x80
localhost kernel: Read of size 8 at addr ffff8883228a3330 by task swapper/26/0
localhost kernel:
localhost kernel: CPU: 26 PID: 0 Comm: swapper/26 Kdump:
loaded Tainted: G OE --------- - - 4.18.0-193.el8.x86_64+debug #1
localhost kernel: Hardware name: HP ProLiant DL360
Gen9/ProLiant DL360 Gen9, BIOS P89 08/12/2016
localhost kernel: Call Trace:
localhost kernel: <IRQ>
localhost kernel: dump_stack+0x9a/0xf0
localhost kernel: print_address_description.cold.3+0x9/0x23b
localhost kernel: kasan_report.cold.4+0x65/0x95
localhost kernel: debug_dma_unmap_sg.part.12+0x10d/0x2d0
localhost kernel: qla2x00_bsg_sp_free+0xaf6/0x1010 [qla2xxx]
Link: https://lore.kernel.org/r/20210329085229.4367-6-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Consolidate zio threshold setting for both FCP & NVMe to prevent one
protocol from clobbering the setting of the other protocol.
Link: https://lore.kernel.org/r/20210329085229.4367-5-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Session was stuck due to explicit logout to target timing out. The target
was in an unresponsive state. This timeout induced an error to the GNL
command from moving forward.
Link: https://lore.kernel.org/r/20210329085229.4367-4-njavali@marvell.com
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The host:channel:scsi_target_id information is helpful in matching an FC
port with a SCSI device, so add it. For initiator FC ports, a -1 would be
displayed for "target" part.
Link: https://lore.kernel.org/r/20210329085229.4367-3-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Removing the response queue processing in the send path is showing IOPS
drop. Add back the process_response_queue() call in the send path.
Link: https://lore.kernel.org/r/20210329085229.4367-2-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
pahole currently only generates the btf_id for external function and
ftrace-able function. Some functions in the bpf_tcp_ca_kfunc_ids
are static (e.g. cubictcp_init). Thus, unless CONFIG_DYNAMIC_FTRACE
is set, btf_ids for those functions will not be generated and the
compilation fails during resolve_btfids.
This patch limits those functions to CONFIG_DYNAMIC_FTRACE. I will
address the pahole generation in a followup and then remove the
CONFIG_DYNAMIC_FTRACE limitation.
Fixes: e78aea8b21 ("bpf: tcp: Put some tcp cong functions in allowlist for bpf-tcp-cc")
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Reported-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329221357.834438-1-kafai@fb.com
A kernel panic was observed due to a timing issue between the sync thread
and the initiator processing a login response from the target. The session
reopen can be invoked both from the session sync thread when iscsid
restarts and from iscsid through the error handler. Before the initiator
receives the response to a login, another reopen request can be sent from
the error handler/sync session. When the initial login response is
subsequently processed, the connection has been closed and the socket has
been released.
To fix this a new connection state, ISCSI_CONN_BOUND, is added:
- Set the connection state value to ISCSI_CONN_DOWN upon
iscsi_if_ep_disconnect() and iscsi_if_stop_conn()
- Set the connection state to the newly created value ISCSI_CONN_BOUND
after bind connection (transport->bind_conn())
- In iscsi_set_param(), return -ENOTCONN if the connection state is not
either ISCSI_CONN_BOUND or ISCSI_CONN_UP
Link: https://lore.kernel.org/r/20210325093248.284678-1-gulam.mohamed@oracle.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Gulam Mohamed <gulam.mohamed@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
index 91074fd97f64..f4bf62b007a0 100644
In nfp_bpf_ctrl_msg_rx, if
nfp_ccm_get_type(skb) == NFP_CCM_TYPE_BPF_BPF_EVENT is true, the skb
will be freed. But the skb is still used by nfp_ccm_rx(&bpf->ccm, skb).
My patch adds a return when the skb was freed.
Fixes: bcf0cafab4 ("nfp: split out common control message handling code")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add error handling in case of failure to send switching data path message
to the host.
Reported-by: Shachar Raindel <shacharr@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_min_tso_segs is now stored in u8, so max value is 255.
255 limit is enforced by proc_dou8vec_minmax().
We can therefore remove the gso_max_segs variable.
Fixes: 47996b489bdc ("tcp: convert elligible sysctls to u8")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After adopting CONFIG_PCPU_DEV_REFCNT=n option, syzbot was able to trigger
a warning [1]
Issue here is that:
- all dev_put() should be paired with a corresponding prior dev_hold().
- A driver doing a dev_put() in its ndo_uninit() MUST also
do a dev_hold() in its ndo_init(), only when ndo_init()
is returning 0.
Otherwise, register_netdevice() would call ndo_uninit()
in its error path and release a refcount too soon.
Fixes: 919067cc84 ("net: add CONFIG_PCPU_DEV_REFCNT")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After adopting CONFIG_PCPU_DEV_REFCNT=n option, syzbot was able to trigger
a warning [1]
Issue here is that:
- all dev_put() should be paired with a corresponding dev_hold(),
and vice versa.
- A driver doing a dev_put() in its ndo_uninit() MUST also
do a dev_hold() in its ndo_init(), only when ndo_init()
is returning 0.
Otherwise, register_netdevice() would call ndo_uninit()
in its error path and release a refcount too soon.
ip6_gre for example (among others problematic drivers)
has to use dev_hold() in ip6gre_tunnel_init_common()
instead of from ip6gre_newlink_common(), covering
both ip6gre_tunnel_init() and ip6gre_tap_init()/
Note that ip6gre_tunnel_init_common() is not called from
ip6erspan_tap_init() thus we also need to add a dev_hold() there,
as ip6erspan_tunnel_uninit() does call dev_put()
[1]
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 0 PID: 8422 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Modules linked in:
CPU: 1 PID: 8422 Comm: syz-executor854 Not tainted 5.12.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Code: 1d 6a 5a e8 09 31 ff 89 de e8 8d 1a ab fd 84 db 75 e0 e8 d4 13 ab fd 48 c7 c7 a0 e1 c1 89 c6 05 4a 5a e8 09 01 e8 2e 36 fb 04 <0f> 0b eb c4 e8 b8 13 ab fd 0f b6 1d 39 5a e8 09 31 ff 89 de e8 58
RSP: 0018:ffffc900018befd0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88801ef19c40 RSI: ffffffff815c51f5 RDI: fffff52000317dec
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815bdf8e R11: 0000000000000000 R12: ffff888018cf4568
R13: ffff888018cf4c00 R14: ffff8880228f2000 R15: ffffffff8d659b80
FS: 00000000014eb300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055d7bf2b3138 CR3: 0000000014933000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__refcount_dec include/linux/refcount.h:344 [inline]
refcount_dec include/linux/refcount.h:359 [inline]
dev_put include/linux/netdevice.h:4135 [inline]
ip6gre_tunnel_uninit+0x3d7/0x440 net/ipv6/ip6_gre.c:420
register_netdevice+0xadf/0x1500 net/core/dev.c:10308
ip6gre_newlink_common.constprop.0+0x158/0x410 net/ipv6/ip6_gre.c:1984
ip6gre_newlink+0x275/0x7a0 net/ipv6/ip6_gre.c:2017
__rtnl_newlink+0x1062/0x1710 net/core/rtnetlink.c:3443
rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3491
rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5553
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502
netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:674
____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
___sys_sendmsg+0xf3/0x170 net/socket.c:2404
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
Fixes: 919067cc84 ("net: add CONFIG_PCPU_DEV_REFCNT")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-03-29
This series contains updates to ice driver only.
Ani does not fail on link/PHY errors during probe as this is not a fatal
error to prevent the user from remedying the problem. He also corrects
checking Wake on LAN support to be port number, not PF ID.
Fabio increases the AdminQ timeout as some commands can take longer than
the current value.
Chinh fixes iSCSI to use be able to use port 860 by using information
from DCBx and other QoS configuration info.
Krzysztof fixes a possible race between ice_open() and ice_stop().
Bruce corrects the ordering of arguments in a memory allocation call.
Dave removes DCBNL device reset bit which is blocking changes coming
from DCBNL interface.
Jacek adds error handling for filter allocation failure.
Robert ensures memory is freed if VSI filter list issues are
encountered.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We fix a warning from the htmldoc tool and an indentation error reported
by smatch. There are no functional changes in this commit.
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
1GbE Intel Wired LAN Driver Updates 2021-03-29
This series contains updates to igc driver only.
Andre Guedes says:
Add XDP support for the igc driver. The approach implemented by this
series follows the same approach implemented in other Intel drivers as
much as possible for the sake of consistency.
The series is organized in two parts. In the first part, i.e. patches
from 1 to 4, igc_main.c and igc_ptp.c code is refactored in preparation
for landing the XDP support, which is introduced in the second part
(patches from 5 to 8).
As far as code organization is concerned, XDP-related helpers are
defined in a new file, igc_xdp.c, and are called by igc_main.c.
The features added by this series have been tested with the samples
provided in samples/bpf/: xdp1, xdp2, xdp_redirect_cpu, and
xdp_redirect_map.
Upcoming series will add support of UMEM and zero-copy features from
AF_XDP.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
