If PCI_D3cold is passed to acpi_pci_set_power_state() as the second
argument and there is no ACPI D3cold support for the given device, the
debug message will state that the device power state has been changed to
D3cold, while in fact it will be D3hot, because acpi_device_set_power()
falls back to D3hot automatically if D3cold is not supported without
returning an error.
To address this issue, modify the debug message to print the current power
state of the target PCI device's ACPI companion instead of printing the
target power state, which may not reflect the real final power state of the
device.
Link: https://lore.kernel.org/r/4319486.LvFx2qVVIh@kreacher
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Highlights:
----------
MCU part:
-Add stm32h750 SoC support. It is based on stm32h743 and embeds
crypto IPs and 2 ADC.
-Add new art-pi board based on stm32h750. This board embeds:
-8MB QSPI flash.
-16MB SPI flash.
-32MB SDRAM.
-AP6212 combo (wifi/bt/fm).
MPU part:
-Use dedicated PTP clock for Ethernet controller on stm32mp151.
-Enable i2c analog filter on stm32mp151.
-DH:
-Update GPIO names.
-Enable crc1 & crryp1 on DHSOM.
-Engicam: add new boards support:
-MicroGEA SOM which embeds STM32MP157aac, 512 MB Nand Flash
I2S.
-MicroGEA STM32MP1 Microdev 2.0 which embeds MicroGEA SOM,
Ethernet up to 100 Mbps, USB typeA, microSD, UMTS LTE, Wifi/BT
LVDS panel connector.
-MicroGEA STM32MP1 MicroDev 2.0 7" which embeds a MicroGEA STM32MP1
MicroDev 2.0 plus 7" Open Frame panel solution (7" AUO B101AW03 LVDS panel
and EDT DT5526 Touch)
-i.Core STM32MP1 EDIMM SoM based on STM32MP157A.
-C.TOUCH 2.0 n EDIMM compliant general purpose Carrier board with capacitive
touch interface support based on i.Core STM32MP1 EDIMM SoM.
It embeds ETH 10/100, wifi/bt, CAN, USB TypeA/OTG, LVDS pannel connector.
-EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation
Board based on i.Core STM32MP1 EDIMM SoM. IT embeds LCD 7" C.Touch,
wifi/bt,2*LVDS FHD, 3*USB2, 1*USB3 ...
-----BEGIN PGP SIGNATURE-----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=+l6P
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT updates for v5.13, round 1
Highlights:
----------
MCU part:
-Add stm32h750 SoC support. It is based on stm32h743 and embeds
crypto IPs and 2 ADC.
-Add new art-pi board based on stm32h750. This board embeds:
-8MB QSPI flash.
-16MB SPI flash.
-32MB SDRAM.
-AP6212 combo (wifi/bt/fm).
MPU part:
-Use dedicated PTP clock for Ethernet controller on stm32mp151.
-Enable i2c analog filter on stm32mp151.
-DH:
-Update GPIO names.
-Enable crc1 & crryp1 on DHSOM.
-Engicam: add new boards support:
-MicroGEA SOM which embeds STM32MP157aac, 512 MB Nand Flash
I2S.
-MicroGEA STM32MP1 Microdev 2.0 which embeds MicroGEA SOM,
Ethernet up to 100 Mbps, USB typeA, microSD, UMTS LTE, Wifi/BT
LVDS panel connector.
-MicroGEA STM32MP1 MicroDev 2.0 7" which embeds a MicroGEA STM32MP1
MicroDev 2.0 plus 7" Open Frame panel solution (7" AUO B101AW03 LVDS panel
and EDT DT5526 Touch)
-i.Core STM32MP1 EDIMM SoM based on STM32MP157A.
-C.TOUCH 2.0 n EDIMM compliant general purpose Carrier board with capacitive
touch interface support based on i.Core STM32MP1 EDIMM SoM.
It embeds ETH 10/100, wifi/bt, CAN, USB TypeA/OTG, LVDS pannel connector.
-EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation
Board based on i.Core STM32MP1 EDIMM SoM. IT embeds LCD 7" C.Touch,
wifi/bt,2*LVDS FHD, 3*USB2, 1*USB3 ...
* tag 'stm32-dt-for-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (26 commits)
ARM: dts: stm32: Add PTP clock to Ethernet controller
ARM: dts: stm32: Enable crc1 and cryp1 where applicable on DHSOM
ARM: dts: stm32: Update GPIO line names on PicoITX
ARM: dts: stm32: Update GPIO line names on DRC02
ARM: dts: stm32: Fill GPIO line names on AV96
ARM: dts: stm32: Fill GPIO line names on DHCOM SoM
dt-bindings: serial: stm32: Use 'type: object' instead of false for 'additionalProperties'
ARM: stm32: Add a new SoC - STM32H750
ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6
ARM: dts: stm32: fix i2c node typo in stm32h743
ARM: dts: stm32: add new instances for stm32h743 MCU
ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750
dt-bindings: arm: stm32: Add compatible strings for ART-PI board
Documentation: arm: stm32: Add stm32h750 value line doc
ARM: dts: stm32: enable the analog filter for all I2C nodes in stm32mp151
ARM: dts: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit
dt-bindings: arm: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit
ARM: dts: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0
ARM: dts: stm32: Add Engicam i.Core STM32MP1 SoM
dt-bindings: arm: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0
...
Link: https://lore.kernel.org/r/48784f53-943b-0baf-d4a0-fcb7d3849b00@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fix up the WLAN on Janice
- Fix the touchscreen on TVK R2
- Push down definitions to the UIBs instead of
trying to share too much.
- Bump the AUX1 voltage on the AB8500 so the
touchscreen will work.
- Define the CTTYSP touchscreen on the TVK R3.
-----BEGIN PGP SIGNATURE-----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=SkXC
-----END PGP SIGNATURE-----
Merge tag 'ux500-dts-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt
Ux500 DTS changes for the v5.13 kernel cycle:
- Fix up the WLAN on Janice
- Fix the touchscreen on TVK R2
- Push down definitions to the UIBs instead of
trying to share too much.
- Bump the AUX1 voltage on the AB8500 so the
touchscreen will work.
- Define the CTTYSP touchscreen on the TVK R3.
* tag 'ux500-dts-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: ux500: Add Cypress CTTYSP touch to TVK UIB
ARM: dts: ux500: Bump AUX1 voltage
ARM: dts: ux500: Clarify UIB version per board
ARM: dts: ux500: Totally separate TVK R2 and R3
ARM: dts: ux500: Push TC35893 defines to each UIB
ARM: dts: ux500: Fix up TVK R3 sensors
ARM: dts: ux500: Push sensors to TVK R2 board
ARM: dts: ux500: Move Synaptics to right include
ARM: dts: ux500: Fix touchscreen on TVK R2
ARM: dts: ux500: Fix BT+WLAN on Janice
Link: https://lore.kernel.org/r/CACRpkdanRQ6A85d=7vgpzbg-m3-yFcpQ4fuzrxZu3RJ0DrA2bQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Couple of changes to describe PCI dma-ranges correctly which was
previously removed and to enable the PCIe and DMA SMMU.
-----BEGIN PGP SIGNATURE-----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=b/Gg
-----END PGP SIGNATURE-----
Merge tag 'juno-updates-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt
ARMv8 Juno updates for v5.13
Couple of changes to describe PCI dma-ranges correctly which was
previously removed and to enable the PCIe and DMA SMMU.
* tag 'juno-updates-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Enable more SMMUs
arm64: dts: juno: Describe PCI dma-ranges
Link: https://lore.kernel.org/r/20210331100410.cenuhvpqoumvsk52@bogus
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Fixes for missing TLB flushes with TDP MMU
* Fixes for race conditions in nested SVM
* Fixes for lockdep splat with Xen emulation
* Fix for kvmclock underflow
* Fix srcdir != builddir builds
* Other small cleanups
ARM:
* Fix GICv3 MMIO compatibility probing
* Prevent guests from using the ARMv8.4 self-hosted tracing extension
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmBlum4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM5sgf9HmO3FOAhMZg6byK8lVBd5M+voNnx
0oC2EWhcT4uuEJ6MZN8CYGorHBtiMFGya5+USCINM9Te2u92jgBhqVaOsc3SRVfE
GPDbwcaSM2LP8T1Ao2ilaMSbcBEbphBrLbiBw2bToIuqDnFXUwL6psdBHyKKYRv+
LbtjfrapdB8lyll9BOhF4Iq0l74jcJEAkD/y7FlMCEgDLFCVpfbkA1HcdV/1oXsJ
+d6WKlAH9643V8HrMoX7jiXamnJVafkX2Q75Lay6xkkHtdB5wnbRFzfJGXELv9qi
6eJ7Oh5oNmrSUIrtdFkeGMdZZoJJgE9GwCXpeXM49VeqTUKkUEx9v9GAsg==
=5B67
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"It's a bit larger than I (and probably you) would like by the time we
get to -rc6, but perhaps not entirely unexpected since the changes in
the last merge window were larger than usual.
x86:
- Fixes for missing TLB flushes with TDP MMU
- Fixes for race conditions in nested SVM
- Fixes for lockdep splat with Xen emulation
- Fix for kvmclock underflow
- Fix srcdir != builddir builds
- Other small cleanups
ARM:
- Fix GICv3 MMIO compatibility probing
- Prevent guests from using the ARMv8.4 self-hosted tracing
extension"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
selftests: kvm: Check that TSC page value is small after KVM_SET_CLOCK(0)
KVM: x86: Prevent 'hv_clock->system_time' from going negative in kvm_guest_time_update()
KVM: x86: disable interrupts while pvclock_gtod_sync_lock is taken
KVM: x86: reduce pvclock_gtod_sync_lock critical sections
KVM: SVM: ensure that EFER.SVME is set when running nested guest or on nested vmexit
KVM: SVM: load control fields from VMCB12 before checking them
KVM: x86/mmu: Don't allow TDP MMU to yield when recovering NX pages
KVM: x86/mmu: Ensure TLBs are flushed for TDP MMU during NX zapping
KVM: x86/mmu: Ensure TLBs are flushed when yielding during GFN range zap
KVM: make: Fix out-of-source module builds
selftests: kvm: make hardware_disable_test less verbose
KVM: x86/vPMU: Forbid writing to MSR_F15H_PERF MSRs when guest doesn't have X86_FEATURE_PERFCTR_CORE
KVM: x86: remove unused declaration of kvm_write_tsc()
KVM: clean up the unused argument
tools/kvm_stat: Add restart delay
KVM: arm64: Fix CPU interface MMIO compatibility detection
KVM: arm64: Disable guest access to trace filter controls
KVM: arm64: Hide system instruction access to Trace registers
- A series from Dong Aisheng to update i.MX8Q device trees for adopting
SS (SubSystems) based bindings.
- New board support: Kontron pitx-imx8m, Engicam i.Core MX8M Mini.
- A series from Adrien Grassein to add various peripheral support for
imx8mm-nitrogen-r2 board.
- A series from Guido Günther to update librem5-devkit device tree.
- A number of patches from Michael Walle to add Root Complex Event
Collector interrupt, update MTD partitions and add rtc0 alias for
ls1028a-kontron-sl28 board.
- Add EQOS MAC support for phyBOARD-Pollux-i.MX8MP.
- Add 2x2 SFP+ cage support for clearfog-itx boards.
- Small and random update for various boards.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmBj8eYUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7Lygf9EHqZZOU7WA0nmmsBM9qJcEmY32aY
XV+9MAqnCDKGoSWtbsApJBft3/SnzRVa+cUiLfUKt3iGaTGpB6xWnHQjnmmJr4zU
aXbrjnR9C4z+xo2P6DvreVs2t6lIj/OI8S2M3nolROfHFQ05/c25+fcWnE4sbnNQ
4y8PQJ4hWaBkerMZEnFZLY4MDAJbJduQP2rnQ3vW4P1K2Be/4iw9luYEMUnZZ7K6
jVLOa7eaPiWZGi7TnxPm+GYHnoGVoFI4dKMkv1rdfpgSGn77yIXquyYPgCuHvgv2
XuroZCKex2mpE/JIsr+hdGHIAjp/nS+OTbR5tlQtpUFuBb77ZPG8yERIxQ==
=2phP
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree update for 5.13:
- A series from Dong Aisheng to update i.MX8Q device trees for adopting
SS (SubSystems) based bindings.
- New board support: Kontron pitx-imx8m, Engicam i.Core MX8M Mini.
- A series from Adrien Grassein to add various peripheral support for
imx8mm-nitrogen-r2 board.
- A series from Guido Günther to update librem5-devkit device tree.
- A number of patches from Michael Walle to add Root Complex Event
Collector interrupt, update MTD partitions and add rtc0 alias for
ls1028a-kontron-sl28 board.
- Add EQOS MAC support for phyBOARD-Pollux-i.MX8MP.
- Add 2x2 SFP+ cage support for clearfog-itx boards.
- Small and random update for various boards.
* tag 'imx-dt64-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (55 commits)
arm64: dts: fsl-ls1028a-kontron-sl28: add rtc0 alias
arm64: dts: ls1028a: move rtc alias to individual boards
arm64: dts: fsl-ls1028a-kontron-sl28: combine unused partitions
arm64: dts: fsl-ls1028a-kontron-sl28: move MTD partitions
arm64: dts: imx8mp-evk: Improve the Ethernet PHY description
arm64: dts: imx8mq-librem5-r3: Mark buck3 as always on
arm64: dts: imx8mq-librem5: Hog the correct gpio
arm64: dts: lx2160a-clearfog-itx: add SFP support
arm64: dts: imx8mp-phyboard-pollux-rdk: Change debug UART
arm64: dts: imx8mn: Reorder flexspi clock-names entry
arm64: dts: imx8mm: Reorder flexspi clock-names entry
arm64: dts: ls1028a: set up the real link speed for ENETC port 2
arm64: dts: imx8mm-nitrogen-r2: add ecspi2 support
arm64: dts: imx: add imx8qm mek support
arm64: dts: imx: add imx8qm common dts file
arm64: dts: imx8qm: add dma ss support
arm64: dts: imx8: split adma ss into dma and audio ss
arm64: dts: imx8qm: add conn ss support
arm64: dts: imx8qm: add lsio ss support
arm64: dts: imx8: switch to new lpcg clock binding
...
Link: https://lore.kernel.org/r/20210331041019.31345-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New board support: i.MX7D based reMarkable2.
- Clean up imx6ql-pfla02 hog group by moving pins into corresponded
client groups.
- Add Netronix embedded controller for imx50-kobo-aura.
- A series from Sebastian Reichel to improve GE Bx50v3 device trees.
- Support I2C bus recovery for imx6qdl-wandboard by adding SCL/SDA
GPIOs.
- Remove unnecessary #address-cells/#size-cells from imx6qdl-gw boards.
- Various small and random device tree update.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmBj7dIUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7VvAf/ckU9OP3OK1gWqxPJTWFdkpETU4si
14G7AvfWJ47d/V5c5EP40CwDnJM6hKgnpWK7IYY89b0Ud6tHH/KhhUzhbT2tMGNa
4sRdIcsFiWOTHJNVgUcceVyPV90xJ8E3OXNe5HwKIZlYlayNcrFmEhVVRd6yzKG5
wAd6DRIcaltzLRJb67UMckLj/7UHhOv1wmrEGAXDQ01CXVUj26pOVWdoOIheRzV6
FiDlQwoyAZW5TITkU7ofpcth8wmgs+5E2HvEtCor9Sdu7MTUOuS9PhyXyNyDx4AN
fIeUSKOJ1Hwd2BQKAyx3EAo3DWy7LbmZiYJkNaCV1Ii+5HhFeIc0V6oqkQ==
=wW2x
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree change for 5.13:
- New board support: i.MX7D based reMarkable2.
- Clean up imx6ql-pfla02 hog group by moving pins into corresponded
client groups.
- Add Netronix embedded controller for imx50-kobo-aura.
- A series from Sebastian Reichel to improve GE Bx50v3 device trees.
- Support I2C bus recovery for imx6qdl-wandboard by adding SCL/SDA
GPIOs.
- Remove unnecessary #address-cells/#size-cells from imx6qdl-gw boards.
- Various small and random device tree update.
* tag 'imx-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (21 commits)
ARM: dts: imx6: pbab01: Set USB OTG port to peripheral
ARM: dts: imx6: pfla02: Fix USB vbus enable pinmuxing
ARM: imx7d-remarkable2: Initial device tree for reMarkable2
ARM: dts: imx7d-mba7: Remove unsupported PCI properties
ARM: dts: imx6qdl-gw*: Remove unnecessary #address-cells/#size-cells
ARM: dts: imx6dl-plybas: Fix gpio-keys W=1 warnings
ARM: dts: imx: bx50v3: Define GPIO line names
ARM: dts: imx: bx50v3: i2c GPIOs are open drain
ARM: dts: imx6q-ba16: improve PHY information
ARM: dts: imx6q-ba16: add USB OTG VBUS enable GPIO
ARM: dts: ls1021a: mark crypto engine dma coherent
ARM: dts: colibri-imx6ull: Change drive strength for usdhc2
ARM: dts: imx6ql-pfla02: Move "hog" pins into corresponded pin groups
ARM: dts: imx6qdl-phytec-pbab01: Select synchronous mode for AUDMUX
ARM: dts: imx6qdl-ts7970: Drop redundant "fsl,mode" option
ARM: dts: imx53-qsb: Describe the esdhc1 card detect pin
ARM: dts: ls1021a: Harmonize DWC USB3 DT nodes name
ARM: dts: imx6qdl-wandboard: add scl/sda gpios definitions for i2c bus recovery
ARM: dts: imx: Mark IIM as syscon on i.MX51/i.MX53
ARM: dts: imx6sl-tolino-shine2hd: Add Netronix embedded controller
...
Link: https://lore.kernel.org/r/20210331041019.31345-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.13, please pull the following:
- Rafal continues to add support for the 4908 SoCs and describes the USB
PHY, firmware flash partitions and Ethernet switch and Ethernet
controller. He also adds support for the TP-Link Archer C2300 V1
router and upates the Netgear R8000P and Asus GT-AC5300 routers network
ports description.
-----BEGIN PGP SIGNATURE-----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=MdDK
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.13/devicetre-arm64' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.13, please pull the following:
- Rafal continues to add support for the 4908 SoCs and describes the USB
PHY, firmware flash partitions and Ethernet switch and Ethernet
controller. He also adds support for the TP-Link Archer C2300 V1
router and upates the Netgear R8000P and Asus GT-AC5300 routers network
ports description.
* tag 'arm-soc/for-5.13/devicetre-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm4908: add Ethernet MAC addr
arm64: dts: broadcom: bcm4908: add Ethernet TX irq
arm64: dts: broadcom: bcm4908: set Asus GT-AC5300 port 7 PHY mode
arm64: dts: broadcom: bcm4908: add TP-Link Archer C2300 V1
dt-bindings: arm: bcm: document TP-Link Archer C2300 binding
arm64: dts: broadcom: bcm4908: fix switch parent node name
arm64: dts: broadcom: bcm4908: describe firmware partitions
arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P LEDs
arm64: dts: broadcom: bcm4908: describe Netgear R8000P switch
arm64: dts: broadcom: bcm4908: describe Ethernet controller
arm64: dts: broadcom: bcm4908: describe USB PHY
Link: https://lore.kernel.org/r/20210330184006.1451315-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 5.13, please pull the following:
- Rafal fixes YAML warnings for the memory nodes of BCM5301X nodes and
adds support for the NVMEM NVRAM node on Linksys and Luxul WLAN
routers. He also fixes up the partitions for the Linksys EA9400 to
use the newly introduced parser compatible and sets the power LED to
its default state.
-----BEGIN PGP SIGNATURE-----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=X7wu
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.13/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.13, please pull the following:
- Rafal fixes YAML warnings for the memory nodes of BCM5301X nodes and
adds support for the NVMEM NVRAM node on Linksys and Luxul WLAN
routers. He also fixes up the partitions for the Linksys EA9400 to
use the newly introduced parser compatible and sets the power LED to
its default state.
* tag 'arm-soc/for-5.13/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: Set Linksys EA9500 power LED
ARM: dts: BCM5301X: Fix Linksys EA9500 partitions
ARM: dts: BCM5301X: Describe NVMEM NVRAM on Linksys & Luxul routers
ARM: dts: BCM5301X: fix "reg" formatting in /memory node
Link: https://lore.kernel.org/r/20210330184006.1451315-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Patches from Krzysztof Kozlowski that fixes dtc warnings
and dtbs_check warnings
- Adjust the "cnds,read-delay" value for the Agilex devkit to 2
-----BEGIN PGP SIGNATURE-----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=JYZq
-----END PGP SIGNATURE-----
Merge tag 'socfpga_dts_update_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt
SoCFPGA DTS updates for v5.13
- Patches from Krzysztof Kozlowski that fixes dtc warnings
and dtbs_check warnings
- Adjust the "cnds,read-delay" value for the Agilex devkit to 2
* tag 'socfpga_dts_update_for_v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: intel: adjust qpsi read-delay property
arm64: dts: intel: socfpga_agilex_socdk_nand: align LED node names with dtschema
arm64: dts: intel: socfpga_agilex: align node names with dtschema
arm64: dts: intel: socfpga_agilex: use defined for GIC interrupts
arm64: dts: intel: socfpga_agilex: move usbphy out of soc node
arm64: dts: intel: socfpga_agilex: remove default status=okay
arm64: dts: intel: socfpga_agilex: move timer out of soc node
arm64: dts: intel: socfpga_agilex: move clocks out of soc node
arm64: dts: intel: socfpga: override clocks by label
Link: https://lore.kernel.org/r/20210330110430.558182-2-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In order to move omap4/5 and dra7 to probe with devicetree data and genpd,
we need to add the missing interconnect target module configuration for
the drivers that do not still have it. This is similar to what we have
already done earlier for am3 and 4 earlier.
These patches are very much similar for all the three SoCs here. The dra7
changes were already available for v5.12 merge window, but were considered
too late to add for v5.12. The patches for omap4 and 5 follow the same
pattern, except for PCIe that is available only on dra7.
We do the changes one driver at a time, and still keep the legacy property
for "ti,hwmods" mostly around, except for cases when already not needed.
We will be dropping the custom property and related legacy data in a
follow-up series.
-----BEGIN PGP SIGNATURE-----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=4Uqt
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.13/dts-genpd-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omaps for genpd support for v5.13
In order to move omap4/5 and dra7 to probe with devicetree data and genpd,
we need to add the missing interconnect target module configuration for
the drivers that do not still have it. This is similar to what we have
already done earlier for am3 and 4 earlier.
These patches are very much similar for all the three SoCs here. The dra7
changes were already available for v5.12 merge window, but were considered
too late to add for v5.12. The patches for omap4 and 5 follow the same
pattern, except for PCIe that is available only on dra7.
We do the changes one driver at a time, and still keep the legacy property
for "ti,hwmods" mostly around, except for cases when already not needed.
We will be dropping the custom property and related legacy data in a
follow-up series.
* tag 'omap-for-v5.13/dts-genpd-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (53 commits)
ARM: dts: Configure simple-pm-bus for omap5 l3
ARM: dts: Configure simple-pm-bus for omap5 l4_cfg
ARM: dts: Configure simple-pm-bus for omap5 l4_per
ARM: dts: Configure simple-pm-bus for omap5 l4_wkup
ARM: dts: Move omap5 l3-noc to a separate node
ARM: dts: Move omap5 mmio-sram out of l3 interconnect
ARM: dts: Configure interconnect target module for omap5 sata
ARM: dts: Configure interconnect target module for omap5 gpmc
ARM: dts: Configure interconnect target module for omap5 mpu
ARM: dts: Configure interconnect target module for omap5 emif
ARM: dts: Configure interconnect target module for omap5 dmm
ARM: dts: Prepare for simple-pm-bus for omap4 l3
ARM: dts: Configure simple-pm-bus for omap4 l4_cfg
ARM: dts: Configure simple-pm-bus for omap4 l4_per
ARM: dts: Configure simple-pm-bus for omap4 l4_wkup
ARM: dts: Move omap4 l3-noc to a separate node
ARM: dts: Move omap4 mmio-sram out of l3 interconnect
ARM: dts: Configure interconnect target module for omap4 mpu
ARM: dts: Configure interconnect target module for omap4 debugss
ARM: dts: Configure interconnect target module for omap4 emif
...
Link: https://lore.kernel.org/r/pull-1617004205-537424@atomide.com-2
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Contains a couple of fixes to the PMC power domain implementation and
exports a regmap from PMC needed to implement USB sleepwalk support.
-----BEGIN PGP SIGNATURE-----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=yqQ7
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.13-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
soc/tegra: Changes for v5.13-rc1
Contains a couple of fixes to the PMC power domain implementation and
exports a regmap from PMC needed to implement USB sleepwalk support.
* tag 'tegra-for-5.13-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Print out domain name when reset fails to acquire
soc/tegra: pmc: Ensure that clock rates aren't too high
soc/tegra: pmc: Fix completion of power-gate toggling
soc/tegra: pmc: Fix imbalanced clock disabling in error code path
soc/tegra: regulators: Fix locking up when voltage-spread is out of range
soc/tegra: pmc: Provide USB sleepwalk register map
Link: https://lore.kernel.org/r/20210401172622.3352990-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
amdgpu:
- Polaris idle power fix
- VM fix
- Vangogh S3 fix
- Fixes for non-4K page sizes
amdkfd:
- dqm fence memory corruption fix
tegra:
- lockdep warning fix
- runtine PM reference fix
- display controller fix
- PLL Fix
imx:
- memory leak in error path fix
- LDB driver channel registration fix
- oob array warning in LDB driver
exynos
- unused header file removal
-----BEGIN PGP SIGNATURE-----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=ud48
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2021-04-02' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Things have settled down in time for Easter, a random smattering of
small fixes across a few drivers.
I'm guessing though there might be some i915 and misc fixes out there
I haven't gotten yet, but since today is a public holiday here, I'm
sending this early so I can have the day off, I'll see if more
requests come in and decide what to do with them later.
amdgpu:
- Polaris idle power fix
- VM fix
- Vangogh S3 fix
- Fixes for non-4K page sizes
amdkfd:
- dqm fence memory corruption fix
tegra:
- lockdep warning fix
- runtine PM reference fix
- display controller fix
- PLL Fix
imx:
- memory leak in error path fix
- LDB driver channel registration fix
- oob array warning in LDB driver
exynos
- unused header file removal"
* tag 'drm-fixes-2021-04-02' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: check alignment on CPU page for bo map
drm/amdgpu: Set a suitable dev_info.gart_page_size
drm/amdgpu/vangogh: don't check for dpm in is_dpm_running when in suspend
drm/amdkfd: dqm fence memory corruption
drm/tegra: sor: Grab runtime PM reference across reset
drm/tegra: dc: Restore coupling of display controllers
gpu: host1x: Use different lock classes for each client
drm/tegra: dc: Don't set PLL clock to 0Hz
drm/amdgpu: fix offset calculation in amdgpu_vm_bo_clear_mappings()
drm/amd/pm: no need to force MCLK to highest when no display connected
drm/exynos/decon5433: Remove the unused include statements
drm/imx: imx-ldb: fix out of bounds array access warning
drm/imx: imx-ldb: Register LDB channel1 when it is the only channel to be used
drm/imx: fix memory leak when fails to init
The doorbell update interfaces are very similar for different queues, such
as SQ, RQ, SRQ, CQ and EQ. So reorganize these code and also fix some
inappropriate naming.
Link: https://lore.kernel.org/r/1616840738-7866-3-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
HIP08 supports both normal and record doorbell mode for RQ and CQ, SQ
record doorbell for userspace is also supported by the software for
flushing CQE process. As now the capability of HIP08 are exposed to the
user and are configurable, the support of normal doorbell should be added
back.
Note that, if switching to normal doorbell, the kernel will report "flush
cqe is unsupported" if modify qp to error status as the flush is based on
record doorbell.
Link: https://lore.kernel.org/r/1616840738-7866-2-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This adds PLLE HW sequencer support which is necessary for USB sleepwalk
functionality.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmBl/aoTHHRyZWRpbmdA
bnZpZGlhLmNvbQAKCRDdI6zXfz6zoVyCD/9a5NzPlb793e8YNkpApn+21bJspZuU
xvQCHXbiyWbYo7MfowsXf268NSw8d8JC66V/gZCHtfIVV6X5QWIdlJYm/g79khiU
L8yNsdxW9zIQvUsIMEa9uCk0k/mjBGW0QklBA5jisikAa3tn99kKXA18/MmtJWXN
M5jrXjKKtNHGLzi97bU2/4bi0NCNm6D/PjlzSBF69O8+H1XBpzhySTh6cWC8HM8G
b1E2BBWoJzoqPlXxeCwl8k+9NPB9HK5j1pk6Y0eNMvA2/jOz0ku3GrD0OUAU3ARz
1RgM167dSyALpVqxjPpaNTUaFal9rOOqzlUnUdxhimZpDG4OXatXdFstUPlsM7B0
84+5gDR9VQaQPwhN7woXYvSvVnu0UyliqtgZnqQ3sBCXTTa4wwIIH1nn9Liq7Nb6
3LjlDiE5paJmu2G4ZJo/ywVNC1TpXZHvCb7Wv9kha3AuWx8H8w7h4QEeboaDzdSF
sA/Vi6eYgBpe3fnB+mS5U7dMQkzYnNEDE2MuAUgddfTvg/tyu3KcBTUaKsWT3ufL
yF4KgqaLOsmcxC5fizVmmdzcLW94WYiWo0xnhhX3dcgNOicJwH5SqgEEtMhbD8DT
PV09wAwPNBbR2zdto/zqhe/jZieGYix2hzNAM2fie1HQt4UlvZ4jkJAOA1Eyz2+s
Y6gFaQcPVWG/GA==
=wLTE
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.13-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
clk: tegra: Changes for v5.13-rc1
This adds PLLE HW sequencer support which is necessary for USB sleepwalk
functionality.
* tag 'tegra-for-5.13-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
clk: tegra: Don't enable PLLE HW sequencer at init
clk: tegra: Add PLLE HW power sequencer control
Link: https://lore.kernel.org/r/20210401172622.3352990-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Encapsulate configuring GMV base address and other type of HEM table into
two separate functions to make process of setting HEM clearer.
Link: https://lore.kernel.org/r/1616815294-13434-5-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The 'HNS_ROCE_OPC_QUERY_MB_ST' command will response the mailbox complete
status and hardware busy flag, and the complete status is only valid when
the busy flag is 0, so it's better to query these two fields at a time
rather than separately.
Link: https://lore.kernel.org/r/1616815294-13434-4-git-send-email-liweihang@huawei.com
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Wei Hu(Xavier) has left Hisilicon and his email address is invalid now.
I'd be glad to add him back with another address if he wants to continue
maintain this module.
Link: https://lore.kernel.org/r/1617007584-39842-1-git-send-email-liweihang@huawei.com
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmBj4/MUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7SzwgAp87KmLQiV43FSrMfWCiW7+W2KkKI
grCf702h9HzqjJQ8F+Ha6Fy+sNuK1PU3idERm8DOHULSAu7Z3oyzku16r8iU2sYm
wfFZNUiwQi4L+ldgaLmAgqHuDJThS4vclk5TxS8WwGa4q5Wqm5Rle8Lj76/YFDFq
vwILI/pFUnXSRC7lXb8mhcJ8+gytWgh9Vle6ZWe6roCfvGKnwTsK2n7lq5FUFvV+
7a5mRtjTigXeVYWdNan98W3M9B0pKZSOOrOiBhRxgB2wI3f+4SIQHj/ojc2nMsXm
eQKPLOm+1BMSRrLz6lqioUcmP72O/lMB3m+Z20fiyPdsmE5qoAdpOW1qRg==
=75HC
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers change for 5.13:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
* tag 'imx-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
firmware: imx: scu-pd: add missed ADC1 pd
firmware: imx: scu-pd: Update comments for single global power domain
firmware: imx: scu-pd: do not power off console domain
soc: imx: add i.MX51/i.MX53 unique id support
Link: https://lore.kernel.org/r/20210331041019.31345-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
changes for 5.13, please pull the following:
- Rafal updates the Broadcom PMB binding to support BCM63138 and updates
the code to support resetting the 63138 SATA controller
-----BEGIN PGP SIGNATURE-----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=M+kT
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.13/drivers' of https://github.com/Broadcom/stblinux into arm/drivers
This pull request contains Broadcom ARM/ARM64/MIPS based SoCs drivers
changes for 5.13, please pull the following:
- Rafal updates the Broadcom PMB binding to support BCM63138 and updates
the code to support resetting the 63138 SATA controller
* tag 'arm-soc/for-5.13/drivers' of https://github.com/Broadcom/stblinux:
soc: bcm: bcm-pmb: add BCM63138 SATA support
dt-bindings: power: bcm-pmb: add BCM63138 binding
Link: https://lore.kernel.org/r/20210330184006.1451315-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=OMHv
-----END PGP SIGNATURE-----
Merge tag 'optee-memref-size-for-v5.13' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/drivers
OP-TEE skip check of returned memref size
* tag 'optee-memref-size-for-v5.13' of git://git.linaro.org/people/jens.wiklander/linux-tee:
tee: optee: do not check memref size on return from Secure World
Link: https://lore.kernel.org/r/20210330110037.GA1166563@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In order to move omap4/5 and dra7 to probe with devicetree data and genpd,
we need to patch the related drivers to prepare.
These are mostly ti-sysc interconnect target module driver changes and soc
init changes. However, there are minor changes to other drivers too. There
are changes for pci-dra7xx probe, omap-prm idle configuration, and a omap5
clock change:
- ti-sysc needs iorange check improved when the interconnect target module
has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid
issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as we
now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and
dra7
- omap-prm driver needs to enable autoidle retention support for omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of using
builtin_platform_driver_probe for deferred probe to work
There are also few minor non-urgent fixes:
- soc init code pdata_quirks_init_clocks should be static
- ti-sysc has few unneeded semiconon typos
- ti-sysc can use kzalloc instead of kcalloc for a single element
-----BEGIN PGP SIGNATURE-----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=lf62
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.13/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/drivers
Driver changes for omaps for genpd support for v5.13
In order to move omap4/5 and dra7 to probe with devicetree data and genpd,
we need to patch the related drivers to prepare.
These are mostly ti-sysc interconnect target module driver changes and soc
init changes. However, there are minor changes to other drivers too. There
are changes for pci-dra7xx probe, omap-prm idle configuration, and a omap5
clock change:
- ti-sysc needs iorange check improved when the interconnect target module
has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid
issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as we
now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and
dra7
- omap-prm driver needs to enable autoidle retention support for omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of using
builtin_platform_driver_probe for deferred probe to work
There are also few minor non-urgent fixes:
- soc init code pdata_quirks_init_clocks should be static
- ti-sysc has few unneeded semiconon typos
- ti-sysc can use kzalloc instead of kcalloc for a single element
* tag 'omap-for-v5.13/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Use kzalloc for allocating only one thing
bus: ti-sysc: remove unneeded semicolon
ARM: OMAP2+: Make symbol 'pdata_quirks_init_clocks' static
PCI: pci-dra7xx: Prepare for deferred probe with module_platform_driver
clk: ti: omap5: Add missing gpmc and ocmc clkctrl
soc: ti: omap-prm: Allow hardware supported retention when idle
ARM: OMAP2+: Init both prm and prcm nodes early for clocks
bus: ti-sysc: Check for old incomplete dtb
bus: ti-sysc: Detect more modules for debugging
bus: ti-sysc: Probe for l4_wkup and l4_cfg interconnect devices first
bus: ti-sysc: Fix initializing module_pa for modules without sysc register
ARM: dts: Fix moving mmc devices with aliases for omap4 & 5
ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable race
soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 iva
bus: ti-sysc: Fix warning on unbind if reset is not deasserted
ARM: OMAP2+: Fix smartreflex init regression after dropping legacy data
soc: ti: omap-prm: Fix reboot issue with invalid pcie reset map for dra7
ARM: dts: am33xx: add aliases for mmc interfaces
bus: omap_l3_noc: mark l3 irqs as IRQF_NO_THREAD
Link: https://lore.kernel.org/r/pull-1617004205-537424@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Max io size is limited by both remote buffer size and the max fr pages per
mr.
Link: https://lore.kernel.org/r/20210325153308.1214057-20-gi-oh.kim@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Before receiving the session name, the error message cannot include any
information about which connection generates the error.
This patch stores the addresses of source and target in the sessname field
to show which generates the error. That field will be over-written
when receiving the session name from client.
Link: https://lore.kernel.org/r/20210325153308.1214057-17-gi-oh.kim@ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEErOkkGDHCg2EbPcGjlfZmHno8x/4FAmBY1LwACgkQlfZmHno8
x/6PjwgAuB0fgmN08RpGdyQWpsw7XUd56/g/92BtQ/p87khI9VP3ay8q+1AYGSxL
jMhSpTu6FOyhyc3y129dtoJDUslsUh5vrXqz3S1niEyYf3CHLjcyc/JPky5/HWJN
HlVwOowqLBKxVoX6AWGqRWc/axxtm9uMWeK2yiI4LYgDvq7DWhENSp4xwtffLt4q
Tg5dcqw5PbCWA2npkabnZjhLuDt1XRaLb455yn9P8tCRiqwf5fQ/8zjfcJLNhYTV
Fy/yrXyBg8RnUOlFviSbtVG0ey1BUdWkxbBd0Vxrh9iw/z+EVQdcN0DZGsKcWsXy
bK7R2sdCHmV9hjgfc4+mLPKwWhyApQ==
=bA9X
-----END PGP SIGNATURE-----
Merge tag 'rpi-poe-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-rpi into arm/drivers
Raspberry Pi driver updates for v5.13:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
* tag 'rpi-poe-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-rpi:
pwm: Add Raspberry Pi Firmware based PWM bus
dt-bindings: pwm: Add binding for RPi firmware PWM bus
input: raspberrypi-ts: Release firmware handle when not needed
staging: vchiq: Release firmware handle on unbind
soc: bcm: raspberrypi-power: Release firmware handle on unbind
reset: raspberrypi: Release firmware handle on unbind
gpio: raspberrypi-exp: Release firmware handle on unbind
clk: bcm: rpi: Release firmware handle on unbind
firmware: raspberrypi: Introduce devm_rpi_firmware_get()
firmware: raspberrypi: Keep count of all consumers
Link: https://lore.kernel.org/r/20210322174232.29549-1-nsaenz@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fix a memory leak in an error path during DRM device initialization,
fix the LDB driver to register channel 1 even if channel 0 is unused,
and fix an out of bounds array access warning in the LDB driver.
-----BEGIN PGP SIGNATURE-----
iI4EABYIADYWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCYGWEMBgccGhpbGlwcC56
YWJlbEBnbWFpbC5jb20ACgkQ1YWnJRg3YsANIgD+Kb7yLjv17TC1lfEVYK8k5nDf
QKDXJJPnQm2O3KvbXDIBAPDQwEGAG3fcT1AjzahbzpntIJsqlyD0aMVSDgK4Dq4H
=jeDO
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-fixes-2021-04-01' of git://git.pengutronix.de/git/pza/linux into drm-fixes
drm/imx: imx-drm-core and imx-ldb fixes
Fix a memory leak in an error path during DRM device initialization,
fix the LDB driver to register channel 1 even if channel 0 is unused,
and fix an out of bounds array access warning in the LDB driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210401092235.GA13586@pengutronix.de
There is common code converting addresses of source machine and
destination machine to a string. We already have a struct rtrs_addr to
store two addresses. This patch introduces a new function that converts
two addresses into one string with struct rtrs_addr.
Link: https://lore.kernel.org/r/20210325153308.1214057-14-gi-oh.kim@ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This contains a couple of fixes for various issues such as lockdep
warnings, runtime PM references, coupled display controllers and
misconfigured PLLs.
-----BEGIN PGP SIGNATURE-----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=fDaE
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.12-rc6' of ssh://git.freedesktop.org/git/tegra/linux into drm-fixes
drm/tegra: Fixes for v5.12-rc6
This contains a couple of fixes for various issues such as lockdep
warnings, runtime PM references, coupled display controllers and
misconfigured PLLs.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210401163352.3348296-1-thierry.reding@gmail.com
Add support for PM7325/PMR735A regulators. This ensures
that consumers are able to modify the physical state of PMIC
regulators.
Signed-off-by: satya priya <skakit@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/1617192339-3760-3-git-send-email-skakit@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Let these cases share the same path since all of them need to close
session.
Link: https://lore.kernel.org/r/20210325153308.1214057-11-gi-oh.kim@ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@ionos.com>
Reviewed-by: Danil Kipnis <danil.kipnis@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The two members are not used in the code, so remove them.
Link: https://lore.kernel.org/r/20210325153308.1214057-10-gi-oh.kim@ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@ionos.com>
Reviewed-by: Danil Kipnis <danil.kipnis@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
We can remove the label after move put_device to the right place.
Link: https://lore.kernel.org/r/20210325153308.1214057-9-gi-oh.kim@ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@ionos.com>
Reviewed-by: Danil Kipnis <danil.kipnis@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no need to dereference 's' from 'sess', since we have "sess =
to_clt_sess(s)" before.
And we can deference 'dev' from 's' earlier.
Link: https://lore.kernel.org/r/20210325153308.1214057-8-gi-oh.kim@ionos.com
Signed-off-by: Guoqing Jiang <guoqing.jiang@ionos.com>
Reviewed-by: Danil Kipnis <danil.kipnis@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Danil will step down, Haris will take over. Also update to email address
to ionos.com, cloud.ionos.com will still work for sometime.
Link: https://lore.kernel.org/r/20210325153308.1214057-2-gi-oh.kim@ionos.com
Signed-off-by: Danil Kipnis <danil.kipnis@cloud.ionos.com>
Acked-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
make W=1 warns this:
In file included from drivers/infiniband/sw/rdmavt/mmap.c:51:0:
./include/rdma/uverbs_ioctl.h:937:1:
warning: ‘_uverbs_get_const_unsigned’ defined but not used [-Wunused-function]
_uverbs_get_const_unsigned(u64 *to,
^~~~~~~~~~~~~~~~~~~~~~~~~~
./include/rdma/uverbs_ioctl.h:930:1:
warning: ‘_uverbs_get_const_signed’ defined but not used [-Wunused-function]
_uverbs_get_const_signed(s64 *to, const struct uverbs_attr_bundle *attrs_bundle,
^~~~~~~~~~~~~~~~~~~~~~~~
Make these functions inline to fix this warnings.
Fixes: 2904bb37b3 ("IB/core: Split uverbs_get_const/default to consider target type")
Link: https://lore.kernel.org/r/20210401021028.25720-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The type of congestion control algorithm includes DCQCN, LDCP, HC3 and
DIP. The driver will select one of them according to the firmware when
querying PF capabilities, and then set the related configuration fields
into QPC.
Link: https://lore.kernel.org/r/1616679236-7795-3-git-send-email-liweihang@huawei.com
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a new type of command to query mac id of functions from the firmware,
it is used to select the template of congestion algorithm. More info will
be supported in the future.
Link: https://lore.kernel.org/r/1616679236-7795-2-git-send-email-liweihang@huawei.com
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Shengming Shu <shushengming1@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
struct trace_array is declared twice. One has been declared
at forward declaration. Remove the duplicate.
Link: https://lkml.kernel.org/r/20210330034056.2266969-1-wanjiabing@vivo.com
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
