mainlining shenanigans
Highlights: ---------- MCU part: -Add stm32h750 SoC support. It is based on stm32h743 and embeds crypto IPs and 2 ADC. -Add new art-pi board based on stm32h750. This board embeds: -8MB QSPI flash. -16MB SPI flash. -32MB SDRAM. -AP6212 combo (wifi/bt/fm). MPU part: -Use dedicated PTP clock for Ethernet controller on stm32mp151. -Enable i2c analog filter on stm32mp151. -DH: -Update GPIO names. -Enable crc1 & crryp1 on DHSOM. -Engicam: add new boards support: -MicroGEA SOM which embeds STM32MP157aac, 512 MB Nand Flash I2S. -MicroGEA STM32MP1 Microdev 2.0 which embeds MicroGEA SOM, Ethernet up to 100 Mbps, USB typeA, microSD, UMTS LTE, Wifi/BT LVDS panel connector. -MicroGEA STM32MP1 MicroDev 2.0 7" which embeds a MicroGEA STM32MP1 MicroDev 2.0 plus 7" Open Frame panel solution (7" AUO B101AW03 LVDS panel and EDT DT5526 Touch) -i.Core STM32MP1 EDIMM SoM based on STM32MP157A. -C.TOUCH 2.0 n EDIMM compliant general purpose Carrier board with capacitive touch interface support based on i.Core STM32MP1 EDIMM SoM. It embeds ETH 10/100, wifi/bt, CAN, USB TypeA/OTG, LVDS pannel connector. -EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board based on i.Core STM32MP1 EDIMM SoM. IT embeds LCD 7" C.Touch, wifi/bt,2*LVDS FHD, 3*USB2, 1*USB3 ... -----BEGIN PGP SIGNATURE----- iQJRBAABCgA7FiEEctl9+nxzUSUqdELdf5rJavIecIUFAmBlvOMdHGFsZXhhbmRy ZS50b3JndWVAZm9zcy5zdC5jb20ACgkQf5rJavIecIXF+A//RVfPTfCAttVnssRI KDFnN6qWYkJkCQ9Ffam+0ZbuJLbLwIoYJy/Anynv3ua5DcBsatmkgjB6C9fOUFJx pbtbv0hq8wakjv/T4bowoAO/dtliJocNQp6eosOIR8jwnfyI2XRLVMEYvF2S/6YO LP0diyoy+2GefHCDykUf2ACPaHPP8ouD21TNDwcvqLhgPk35gYSV1leMueBdC6Y4 zRRQFw1ffHMprKZ79xlJ8f79EK5pmAA2Ap+dWqJ8o2C+M0bto+pGxDpHb+Y69JYj AhLUvevcHzvaOSy5yuz+80jP3v6zC2MOJ+EFvSswJTA3D5lam61QVTDh/fP5wQpz ddvYMUPDk6gtM1uA2AQlDU+Y8jTvbnm7iugixactKanBEI5W5gfyGtPRQ1SKvmb0 49PzCuhXHLk2Jxx5NeowXZb6xnpgQGBFZAHoCih+A/Do7UUYOBI6+YEKca0l1SnS ALks/bdzTxv62sNUSAGdbFLhYXd+PP5YQg/0OQxrw1HJhr1tEBpotrMBkwGQmQvF 3s5vaz65rdSs7dJfmEn/MhxQyYTrvDYsO02sh2DEtsAGfJcCjOcJAsyU2PKrJb7j i+bqgTl0SCNk8m+nrNtYX97wNtoAVBaaRvvc9s3e6CvMaVmlX52u1pnGnlPzcJ4g bu+Rq3TiYWku/PWZTWIymo97+9g= =+l6P -----END PGP SIGNATURE----- Merge tag 'stm32-dt-for-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.13, round 1 Highlights: ---------- MCU part: -Add stm32h750 SoC support. It is based on stm32h743 and embeds crypto IPs and 2 ADC. -Add new art-pi board based on stm32h750. This board embeds: -8MB QSPI flash. -16MB SPI flash. -32MB SDRAM. -AP6212 combo (wifi/bt/fm). MPU part: -Use dedicated PTP clock for Ethernet controller on stm32mp151. -Enable i2c analog filter on stm32mp151. -DH: -Update GPIO names. -Enable crc1 & crryp1 on DHSOM. -Engicam: add new boards support: -MicroGEA SOM which embeds STM32MP157aac, 512 MB Nand Flash I2S. -MicroGEA STM32MP1 Microdev 2.0 which embeds MicroGEA SOM, Ethernet up to 100 Mbps, USB typeA, microSD, UMTS LTE, Wifi/BT LVDS panel connector. -MicroGEA STM32MP1 MicroDev 2.0 7" which embeds a MicroGEA STM32MP1 MicroDev 2.0 plus 7" Open Frame panel solution (7" AUO B101AW03 LVDS panel and EDT DT5526 Touch) -i.Core STM32MP1 EDIMM SoM based on STM32MP157A. -C.TOUCH 2.0 n EDIMM compliant general purpose Carrier board with capacitive touch interface support based on i.Core STM32MP1 EDIMM SoM. It embeds ETH 10/100, wifi/bt, CAN, USB TypeA/OTG, LVDS pannel connector. -EDIMM2.2 Starter Kit is an EDIMM 2.2 Form Factor Capacitive Evaluation Board based on i.Core STM32MP1 EDIMM SoM. IT embeds LCD 7" C.Touch, wifi/bt,2*LVDS FHD, 3*USB2, 1*USB3 ... * tag 'stm32-dt-for-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (26 commits) ARM: dts: stm32: Add PTP clock to Ethernet controller ARM: dts: stm32: Enable crc1 and cryp1 where applicable on DHSOM ARM: dts: stm32: Update GPIO line names on PicoITX ARM: dts: stm32: Update GPIO line names on DRC02 ARM: dts: stm32: Fill GPIO line names on AV96 ARM: dts: stm32: Fill GPIO line names on DHCOM SoM dt-bindings: serial: stm32: Use 'type: object' instead of false for 'additionalProperties' ARM: stm32: Add a new SoC - STM32H750 ARM: dts: stm32: add support for art-pi board based on stm32h750xbh6 ARM: dts: stm32: fix i2c node typo in stm32h743 ARM: dts: stm32: add new instances for stm32h743 MCU ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h750 dt-bindings: arm: stm32: Add compatible strings for ART-PI board Documentation: arm: stm32: Add stm32h750 value line doc ARM: dts: stm32: enable the analog filter for all I2C nodes in stm32mp151 ARM: dts: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit dt-bindings: arm: stm32: Add Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit ARM: dts: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 ARM: dts: stm32: Add Engicam i.Core STM32MP1 SoM dt-bindings: arm: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 ... Link: https://lore.kernel.org/r/48784f53-943b-0baf-d4a0-fcb7d3849b00@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
---|---|---|
arch | ||
block | ||
certs | ||
crypto | ||
Documentation | ||
drivers | ||
fs | ||
include | ||
init | ||
ipc | ||
kernel | ||
lib | ||
LICENSES | ||
mm | ||
net | ||
samples | ||
scripts | ||
security | ||
sound | ||
tools | ||
usr | ||
virt | ||
.clang-format | ||
.cocciconfig | ||
.get_maintainer.ignore | ||
.gitattributes | ||
.gitignore | ||
.mailmap | ||
COPYING | ||
CREDITS | ||
Kbuild | ||
Kconfig | ||
MAINTAINERS | ||
Makefile | ||
README |
Linux kernel ============ There are several guides for kernel developers and users. These guides can be rendered in a number of formats, like HTML and PDF. Please read Documentation/admin-guide/README.rst first. In order to build the documentation, use ``make htmldocs`` or ``make pdfdocs``. The formatted documentation can also be read online at: https://www.kernel.org/doc/html/latest/ There are various text files in the Documentation/ subdirectory, several of them using the Restructured Text markup notation. Please read the Documentation/process/changes.rst file, as it contains the requirements for building and running the kernel, and information about the problems which may result by upgrading your kernel.