The 4U fans didn't have the correct properties since the fan nodes
were redefined. Fix this by referencing each fan individually and
adding the differences to the 4U fans.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-12-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Set watchdog 1 to pulse the fan watchdog circuit that drives the FAULT
pin of the MAX31785, resulting in fans running at full speed, if at
any point the BMC stops pulsing it, such as a BMC reboot at runtime.
Enable watchdog 2 for BMC reboots.
Signed-off-by: Matthew Barth <msbarth@linux.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210329150020.13632-11-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
This commit adds presence detect GPIO chips for various FRUs on
Rainier. Also, correct the I2C address for the tca9554.
Signed-off-by: Alpana Kumari <alpankum@in.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-10-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Rainier has two dual-chip modules and therefore four CFAMs with their
associated engines. Add these to the devicetree with the i2c busses
that have devices on them.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210329150020.13632-5-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add a gpio-keys-polled section to the Rainier device tree for the fan
presence signals on the PCA9552 I2C device on bus 7.
Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Signed-off-by: Matthew Barth <msbarth@linux.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-4-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
These LEDs are directly connected to the BMC's GPIO bank.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210329150020.13632-3-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
This is a relatively low-cost AST2500-based Xeon E-2100/E-2200 series
mini-ITX board that we hope can provide a decent platform for OpenBMC
development.
This initial device-tree provides the necessary configuration for
basic BMC functionality such as host power control, serial console and
KVM support, and POST code snooping.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210401044232.9637-1-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>
In commit 9e67600ed6 ("scsi: iscsi: Fix race condition between login and
sync thread") I missed that libiscsi was now setting the iSCSI class state,
and that patch ended up resetting the state during conn stoppage and using
the wrong state value during ep_disconnect. This patch moves the setting of
the class state to the class module and then fixes the two issues above.
Link: https://lore.kernel.org/r/20210406171746.5016-1-michael.christie@oracle.com
Fixes: 9e67600ed6 ("scsi: iscsi: Fix race condition between login and sync thread")
Cc: Gulam Mohamed <gulam.mohamed@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If there is a IOCTL_SET_PLL_FRAC_MODE request sent to ATF ever,
we shouldn't skip invoking PM_CLOCK_ENABLE fn even though this
pll has been enabled. In ATF implementation, it will only assign
the mode to the variable (struct pm_pll *)pll->mode when handling
IOCTL_SET_PLL_FRAC_MODE call. Invoking PM_CLOCK_ENABLE can force
ATF send request to PWU to set the pll mode to PLL's register.
There is a scenario that happens in enabling VPLL_INT(clk_id:96):
1) VPLL_INT has been enabled during booting.
2) A driver calls clk_set_rate and according to the rate, the VPLL_INT
should be set to FRAC mode. Then zynqmp_pll_set_mode is called
to pass IOCTL_SET_PLL_FRAC_MODE to ATF. Note that at this point
ATF just stores the mode to a variable.
3) This driver calls clk_prepare_enable and zynqmp_pll_enable is
called to try to enable VPLL_INT pll. Because of 1), the function
zynqmp_pll_enable just returns without doing anything after checking
that this pll has been enabled.
In the scenario above, the pll mode of VPLL_INT will never be set
successfully. So adding set_pll_mode to check condition to fix it.
Fixes: 3fde0e16d0 ("drivers: clk: Add ZynqMP clock driver")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20210406153131.601701-1-quanyang.wang@windriver.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The round_rate callback should only perform rate calculation and not
involve calling zynqmp_pll_set_mode to change the pll mode. So let's
move zynqmp_pll_set_mode out of round_rate and to set_rate callback.
Fixes: 3fde0e16d0 ("drivers: clk: Add ZynqMP clock driver")
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Link: https://lore.kernel.org/r/20210406154015.602779-1-quanyang.wang@windriver.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Since commit 1b8b31a2e6 ("selinux: convert policy read-write lock to
RCU"), there is a small window during policy load where the new policy
pointer has already been installed, but some threads may still be
holding the old policy pointer in their read-side RCU critical sections.
This means that there may be conflicting attempts to add a new SID entry
to both tables via sidtab_context_to_sid().
See also (and the rest of the thread):
https://lore.kernel.org/selinux/CAFqZXNvfux46_f8gnvVvRYMKoes24nwm2n3sPbMjrB8vKTW00g@mail.gmail.com/
Fix this by installing the new policy pointer under the old sidtab's
spinlock along with marking the old sidtab as "frozen". Then, if an
attempt to add new entry to a "frozen" sidtab is detected, make
sidtab_context_to_sid() return -ESTALE to indicate that a new policy
has been installed and that the caller will have to abort the policy
transaction and try again after re-taking the policy pointer (which is
guaranteed to be a newer policy). This requires adding a retry-on-ESTALE
logic to all callers of sidtab_context_to_sid(), but fortunately these
are easy to determine and aren't that many.
This seems to be the simplest solution for this problem, even if it
looks somewhat ugly. Note that other places in the kernel (e.g.
do_mknodat() in fs/namei.c) use similar stale-retry patterns, so I think
it's reasonable.
Cc: stable@vger.kernel.org
Fixes: 1b8b31a2e6 ("selinux: convert policy read-write lock to RCU")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The clock driver depends on ZYNQMP_FIRMWARE which in turn depends on
ARCH_ZYNQMP. Simplify the Kconfig by dropping the redundant dependency
on ARCH_ZYNQMP as it'll be applied transitively via ZYNQMP_FIRMWARE.
Signed-off-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp>
Link: https://lore.kernel.org/r/20210322061754.1065367-3-punit1.agrawal@toshiba.co.jp
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
When booting the kernel on zynqmp based platforms such as Ultra96v2,
peripheral drivers such as that for the sdcard depend on the presence
of clocks.
Enable the clock driver if it's dependencies are compiled to avoid
building an unbootable kernel.
Signed-off-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp>
Link: https://lore.kernel.org/r/20210322061754.1065367-2-punit1.agrawal@toshiba.co.jp
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes
adding/removing entries to/from parent_data easy and errorproof.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-34-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes
adding/removing entries to/from parent_data easy and errorproof.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-33-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes
adding/removing entries to/from parent_data easy and errorproof.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-32-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes
adding/removing entries to/from parent_data easy and errorproof.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-31-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use ARRAY_SIZE() instead of manually specifying num_parents. This makes
adding/removing entries to/from parent_data easy and errorproof.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-30-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Switch to using parent_hws instead of parent_data when parents are
defined in this driver and so accessible using clk_hw.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-29-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Switch to using parent_hws instead of parent_data when parents are
defined in this driver and so accessible using clk_hw.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-28-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Switch to using parent_hws instead of parent_data when parents are
defined in this driver and so accessible using clk_hw.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-27-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Switch to using parent_hws instead of parent_data when parents are
defined in this driver and so accessible using clk_hw.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-26-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Switch to using parent_hws instead of parent_data when parents are
defined in this driver and so accessible using clk_hw.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-25-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Switch to using parent_hws instead of parent_data when parents are
defined in this driver and so accessible using clk_hw.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-24-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Switch to using parent_hws instead of parent_data when parents are
defined in this driver and so accessible using clk_hw.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-23-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Switch to using parent_hws instead of parent_data when parents are
defined in this driver and so accessible using clk_hw.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-22-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Switch to using parent_hws instead of parent_data when parents are
defined in this driver and so accessible using clk_hw.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-21-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Switch to using parent_hws instead of parent_data when parents are
defined in this driver and so accessible using clk_hw.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-20-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Switch to using parent_hws instead of parent_data when parents are
defined in this driver and so accessible using clk_hw.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-19-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Switch to using parent_hws instead of parent_data when parents are
defined in this driver and so accessible using clk_hw.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-18-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The test clock isn't in the bindings and apparently it's not used by
anyone upstream. Remove it.
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-17-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The test clock isn't in the bindings and apparently it's not used by
anyone upstream. Remove it.
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-16-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The test clock isn't in the bindings and apparently it's not used by
anyone upstream. Remove it.
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-15-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert the clock driver to specify parent data rather than parent
names, to actually bind using 'clock-names' specified in the DTS rather
than global clock names.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-14-dmitry.baryshkov@linaro.org
[sboyd@kernel.org: Silence checkpatch block comments]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert the clock driver to specify parent data rather than parent
names, to actually bind using 'clock-names' specified in the DTS rather
than global clock names.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-13-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Convert the clock driver to specify parent data rather than parent
names, to actually bind using 'clock-names' specified in the DTS rather
than global clock names.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210405224743.590029-12-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Checkpatch reports the following, fix it.
-----------------------------------------
drivers/net/ethernet/intel/ice/ice_main.c
-----------------------------------------
CHECK:BRACES: Blank lines aren't necessary before a close brace '}'
FILE: drivers/net/ethernet/intel/ice/ice_main.c:455:
+
+}
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Currently the driver is doing two unnecessary checks. First both ops are
checking if the VLAN ID passed in is less than VLAN_N_VID and second
both ops are checking to see if a port VLAN is configured on the VSI.
The first check is already handled by the 8021q driver so this is an
unnecessary check. The second check is unnecessary because the PF VSI is
never put into a port VLAN.
Remove these checks.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tracking of the rx_gro_dropped statistic was removed in
commit f73fc40327 ("ice: drop dead code in ice_receive_skb()").
Remove the associated variables and its reporting to ethtool stats.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
