Commit Graph

760 Commits

Author SHA1 Message Date
Takashi Iwai
c9bce91f90 [ALSA] Update documentation for ice1712 and ice1724
Documentation,ICE1712 driver
Updated the documentation for ice1712 and ice1724 drivers.
Added the device description for shuttle SN25P missing in the last patch.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29 10:14:42 +02:00
Takashi Iwai
d6e33796b5 [ALSA] cmipci: Fix obsolete description
Documentation
Fixed obsolete description about CMIPCI driver.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29 10:14:36 +02:00
Takashi Iwai
fc20a562ca [ALSA] Add support of VIA VT8251/VT8237A HD-Audio controllers
Documentation,HDA Intel driver
Added the support of VIA VT8251/VT8237A HD-Audio controllers.
They are (almost) compatible with Intel ICH6/7.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29 10:08:43 +02:00
Frederick Li
f5d40b30ed [ALSA] Adding support for ATI IXP450 HD Audio device support
Documentation,HDA Intel driver
This patch changes the Intel HD Audio device driver to include
the support of HD Audio device embedded in ATI south bridge
IXP450. Because the design of ATI chipset follows intel HD Audio
specification 1.0, the programming method is the same as that
of intel HD Audio device exception one minor change which requires
to enable snoop for DMA transport. There are 3 changes that have been
made to hda_intel.c file.
  1. Added device ID for ATI HD Audio device;
  2. Increase maximum CODEC supported to 4;
  3. Enable snoop during the driver initialization.

Signed-off-by: Frederick Li <fli@ati.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29 10:08:40 +02:00
Takashi Iwai
dfc0ff62a1 [ALSA] Add ASUS Z71V support
Documentation,HDA Codec driver
Added the ASUS Z71V (or similar) laptop support.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29 10:08:33 +02:00
Takashi Iwai
c74db86bcf [ALSA] Add position_fix module option
Documentation,HDA Intel driver
Added position_fix module option to HDA-intel driver for fixing up
the DMA position (possibly hardware-) bugs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29 10:08:30 +02:00
Takashi Iwai
01d25d460a [ALSA] Replace pci_module_init() with pci_register_driver()
Documentation,ALS4000 driver,ATIIXP driver,ATIIXP-modem driver
AZT3328 driver,BT87x driver,CMIPCI driver,CS4281 driver
ENS1370/1+ driver,ES1938 driver,ES1968 driver,FM801 driver
Intel8x0 driver,Intel8x0-modem driver,Maestro3 driver,RME32 driver
RME96 driver,SonicVibes driver,VIA82xx driver,VIA82xx-modem driver
ALI5451 driver,au88x0 driver,CA0106 driver,CS46xx driver
EMU10K1/EMU10K2 driver,HDA Intel driver,ICE1712 driver,ICE1724 driver
KORG1212 driver,MIXART driver,NM256 driver,RME HDSP driver
RME9652 driver,Trident driver,Digigram VX222 driver,YMFPCI driver
Replace the obsolete pci_module_init() with pci_register_driver().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29 10:00:32 +02:00
Sergey Vlasov
2d7eb7cb2b [ALSA] Support all sample rate conversion capabilities of DXS channels
Documentation,VIA82xx driver
Add support for full sample rate conversion capabilities of DXS
channels present in VIA VT8233/5/7 controllers:

- any sample rate in the 8000 ... 48000 Hz range is supported even if
  the AC'97 codec supports only 48000 Hz output;

- different DXS channels can use different sample rates at the same
  time (the controller performs required sample rate conversion and
  mixing in hardware).

Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29 10:00:24 +02:00
Lee Revell
9c220a31fd [ALSA] some docs for the new emu10k1 multichannel functionality
Documentation
Not complete, or even spell checked, but in case I don't get a chance to
work on it again before 1.0.9, here is what i have so far.  It should go
in alsa-kernel/Documentation/emu10k1-jack.txt.

Signed-off-by: Lee Revell <rlrevell@joe-job.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2005-05-29 09:00:44 +02:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00