remove parenthesis around the CONST | CONST.
It will be also fixed checkpatch.pl warning about
"Alignment should match open parenthesis" becasue
parenthesis were removed by this patch.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
the dgnc_offset_table has a same value with (1 << port).
So I tried to replace dgnc_offset_table array with 1 << port.
And also there are redundant assignments(tmp and current_port)
inside while loop for checking uart port, and remove them.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the checkpatch.pl issues by using the BIT macro and defining some
macros for the multi-bit fields.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For completeness, define the registers used by this driver and remove
the magic numbers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, add some whitespace to the digital output subdevice
initialization.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This function assumes that the async subdevice has a cancel() function.
It looks like all the current comedi drivers implement a cancel() for
the async subdevices except for the dt2814 analog input usbdevice.
Fix comedi_handle_events() so it does not try to call a non-existent
cancel() function.
Add a dev_warn() to __comedi_device_postconfig_async() so that any new
driver authors will be reminded to implement the cancel().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tidy up this function and fix the checkpatch.pl issues:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the checkpatch.pl issues by using the BIT macro and defining some
macros for the multi-bit fields.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For completeness, define the registers used by this driver and remove
the magic numbers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, add some whitespace to the comedi_driver definition.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, add some whitespace to the digital output subdevice
initialization.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chnages memory allocation style in order to silence a checkpatch.pl
warning.
Signed-off-by: Ben Marsh <bmarsh94@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
timed_output was only used by the Android vibrator HAL which has now
learned how to use LED triggers instead[1]. Any users of it in AOSP are
on ancient kernels. Adding support for LED triggers is purely DT changes
and proper kernel config.
[1] https://android.googlesource.com/platform%2Fhardware%2Flibhardware/+/61701df363310a5cbd95e3e1638baa9526e42c9b
Cc: John Stultz <john.stultz@linaro.org>
Cc: "Arve Hjønnevåg" <arve@android.com>
Cc: Riley Andrews <riandrews@android.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don't need to have a wmb() in visordriver_remove_device. Also removed
an unnecessary check for drv being null.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The channel_bytes attribute in the visor_device struct was meant to keep
track of the number of bytes in the associated channel of the device.
Not only is the variable never set nor used, but the information can
already be accessed by referencing visor_device->visorchannel->nbytes.
Signed-off-by: Alexander Curtin <alexander.curtin@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'visor_device.devnodes' field was used for displaying driver version
information through the devmajorminor sysfs attribute, which has recently
been removed, rendering the field unnecessary.
Signed-off-by: Alexander Curtin <alexander.curtin@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The visor_device.type field was included when preparing to remove
the device_info struct. However, it's not used at all, and was already
redundant by the existence of the 'visor_device.channel_type_guid'
field.
Signed-off-by: Alexander Curtin <alexander.curtin@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'description' variable in visor_device was added in preparation for
removing the 'device_info' struct when the uislib files were removed.
That attribute is never accessed nor set, and the 'name' attribute
provides enough information to correctly identify the driver, it is not
needed.
Signed-off-by: Alexander Curtin <alexander.curtin@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fields 'switch_no' and 'internal_port_no' were originally added to the
visor_device struct in preparation of removing the 'device_info' struct
in the now removed 'uislib' library. After the refactoring was complete,
these attributes are not referenced anywhere, and there are no plans to
use them.
Signed-off-by: Alexander Curtin <alexander.curtin@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes "next" member of wlandevice_t since it
is not used anywhere in the wlan-ng code.
Signed-off-by: Claudiu Beznea <claudiu.beznea@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
max_d is not initialized and should be set to the largest D
value of 6.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removing two "!= NULL" from fwserial.c as suggested by checkpatch.pl.
Note that the associated expression "port->port.console" is a 1-bit-field
that is already assumed as an implicit boolean (that is: without comparison)
Signed-off-by: Dominique van den Broeck <domdevlin@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Coding-style-only modifications to remove every warning saying:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
Compiled against revision "next-20160327".
(checkpatch.pl was updated to treat "UNSPECIFIED_INT" warnings
as of commit a1ce18e4f9 )
Signed-off-by: Dominique van den Broeck <domdevlin@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch.pl warnings about lines over 80 characters in
"comedi_fops.c".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the checkpatch.pl warning:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
+ unsigned runflags;
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
+struct comedi_device *comedi_dev_get_from_minor(unsigned minor);
Signed-off-by: Aniket Sharma <badbuddha91@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The functions double_depth, check_card_fail, check_card_ejected are not
used anywhere in the kernel. So, remove their prototype and definition.
Grepped to find occurences.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The functions rtsx_disable_card_int, rtsx_undo_delink,
rtsx_check_link_ready are not used anywhere in the kernel. So,remove
their definition and prototype.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removes a blank line in order to silence a checkpatch.pl warning.
Signed-off-by: Ben Marsh <bmarsh94@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch convert usb_prism_tbl[] into a const array
since it is not modified anywhere in prism2usb.c file.
Signed-off-by: Claudiu Beznea <claudiu.beznea@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the memcpy() for two variables which were
previously tested with memcmp(). The result of memcmp() was
zero which means that the previously tested variables were
already equal.
Signed-off-by: Claudiu Beznea <claudiu.beznea@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The zero-length file "ni_mio_c_common.c" was inadvertantly created by
commit e563637b5f ("staging: comedi: Use ARRAY_SIZE for sizes of
arrays"). Remove it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The functions rtw_enqueue_recvbuf23a and rtw_enqueue_recvbuf23a_to_head
are never used anywhere in the kernel. So, remove their definition and
prototype.
Grepped to find occurences.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The functions rtw_get_oper_bw23a and rtw_get_oper_ch23aoffset are never
used anywhere in the kernel. So, remove their definition and prototype.
Grepped to find occurences.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fix checkpatch.pl warning about 'Prefer 'unsigned int' to bare use of
'unsigned''
Signed-off-by: Clifton Barnes <clifton.a.barnes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the local inline and use the generic kernel rol64 instead.
Miscellanea:
o Added a newline between a multiple line macro for consistency
with the other multiple line macros
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch replaces struct semaphore hSemScanReq with struct mutex
scan_req_lock. It is better to use mutex than semaphore.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
struct semaphore SemHandleUpdateStats is defined but never used in this
driver, so just remove it.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch changes data type of wid argument in wilc_wlan_cfg_get_val
from u32 to u16. It is better to change data type of wid because wid has
one of enum WID_T that is data type of u16. And, there is no need to use
u16 type casting when calling wilc_wlan_cfg_get_wid_value function.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch changes data type of wid argument in wilc_wlan_cfg_get from
u32 to u16. It is better to change data type of wid because wid has one
of enum WID_T that is data type of u16. And, there is no need to use u16
type casting when calling wilc_wlan_cfg_get_wid function.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch changes data type of wid argument in wilc_wlan_cfg_set from
u32 to u16. It is better to change data type of wid because wid has one of
enum WID_T that is data type of u16. And, there is no need to use u16
type casting when calling wilc_wlan_cfg_set_wid function.
Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the macro CFS_FAULT_CHECK() which behaves like CFS_FAIL_CHECK()
except that any site may be matched by setting CFS_FAULT (0x02000000)
in cfs_fail_loc. Add cfs_fail_err for use as a return value with
CFS_FAULT_CHECK().
Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5409
Reviewed-on: http://review.whamcloud.com/11263
Reviewed-by: Robert Read <robert.read@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
