Commit Graph

2941 Commits

Author SHA1 Message Date
Joe Perches
5a2ad98e92 arch/powerpc: Fix continuation line formats
String constants that are continued on subsequent lines with \
are not good.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-09 13:55:05 +11:00
Will Schmidt
25ef231de2 powerpc/pseries: Hypervisor call tracepoints hcall_stats touchup
The tb_total and purr_total values reported via the hcall_stats code
should be cumulative, rather than being replaced by the latest delta tb
or purr value.

Tested-by: Will Schmidt <will_schmidt@vnet.ibm.com>
Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com>
Acked-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-09 13:55:05 +11:00
Mark Nelson
36350e0069 powerpc/pseries: Fix kexec regression caused by CPPR tracking
The code to track the CPPR values added by commit
49bd364713 ("powerpc/pseries: Track previous
CPPR values to correctly EOI interrupts") broke kexec on pseries because
the kexec code in xics.c calls xics_set_cpu_priority() before the IPI has
been EOI'ed. This wasn't a problem previously but it now triggers a BUG_ON
in xics_set_cpu_priority() because os_cppr->index isn't 0.

Fix this problem by setting the index on the CPPR stack to 0 before calling
xics_set_cpu_priority() in xics_teardown_cpu().

Also make it clear that we only want to set the priority when there's just
one CPPR value in the stack, and enforce it by updating the value of
os_cppr->stack[0] rather than os_cppr->stack[os_cppr->index].

While we're at it change the BUG_ON to a WARN_ON.

Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Mark Nelson <markn@au1.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-08 15:29:19 +11:00
Peter Tyser
7b62922a07 powerpc/85xx: Fix SMP when "cpu-release-addr" is in lowmem
Recent U-Boot commit 5ccd29c3679b3669b0bde5c501c1aa0f325a7acb caused
the "cpu-release-addr" device tree property to contain the physical RAM
location that secondary cores were spinning at.  Previously, the
"cpu-release-addr" property contained a value referencing the boot page
translation address range of 0xfffffxxx, which then indirectly accessed
RAM.

The "cpu-release-addr" is currently ioremapped and the secondary cores
kicked.  However, due to the recent change in "cpu-release-addr", it
sometimes points to a memory location in low memory that cannot be
ioremapped.  For example on a P2020-based board with 512MB of RAM the
following error occurs on bootup:

  <...>
  mpic: requesting IPIs ...
  __ioremap(): phys addr 0x1ffff000 is RAM lr c05df9a0
  Unable to handle kernel paging request for data at address 0x00000014
  Faulting instruction address: 0xc05df9b0
  Oops: Kernel access of bad area, sig: 11 [#1]
  SMP NR_CPUS=2 P2020 RDB
  Modules linked in:
  <... eventual kernel panic>

Adding logic to conditionally ioremap or access memory directly resolves
the issue.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Nate Case <ncase@xes-inc.com>
Reported-by: Dipen Dudhat <B09055@freescale.com>
Tested-by: Dipen Dudhat <B09055@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-03 17:39:49 +11:00
Benjamin Herrenschmidt
bf647fafda powerpc/pseries: Fix xics build without CONFIG_SMP
desc->affinity doesn't exit in that case. Let's use a macro for
the UP variant of get_irq_server(), it's the easiest way, avoids
evaluating arguments.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-01 13:32:41 +11:00
Grant Likely
0ada0a7312 Merge commit 'v2.6.33-rc5' into secretlab/test-devicetree 2010-01-28 14:38:25 -07:00
Grant Likely
6016a363f6 of: unify phandle name in struct device_node
In struct device_node, the phandle is named 'linux_phandle' for PowerPC
and MicroBlaze, and 'node' for SPARC.  There is no good reason for the
difference, it is just an artifact of the code diverging over a couple
of years.  This patch renames both to simply .phandle.

Note: the .node also existed in PowerPC/MicroBlaze, but the only user
seems to be arch/powerpc/platforms/powermac/pfunc_core.c.  It doesn't
look like the assignment between .linux_phandle and .node is
significantly different enough to warrant the separate code paths
unless ibm,phandle properties actually appear in Apple device trees.

I think it is safe to eliminate the old .node property and use
phandle everywhere.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: David S. Miller <davem@davemloft.net>
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-28 14:06:53 -07:00
David S. Miller
51c24aaaca Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 2010-01-23 00:31:06 -08:00
Liu Yu-B13201
c1fb8340d7 mpc8569mds: Add bscr setting for rtbi mode
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-21 01:17:54 -08:00
Nathan Fontenot
d0174c7219 powerpc: Move cpu hotplug driver lock from pseries to powerpc
Move the defintion and lock helper routines for the cpu hotplug driver
lock from pseries to powerpc code to avoid build breaks for platforms
other than pseries that use cpu hotplug.

Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Acked-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:26:18 +11:00
Michael Ellerman
b0ff153cd6 powerpc/iseries: Initialise on-stack completion
get_viotape_info() declares a vio_waitevent on the stack, which
contains a completion, but never initialises the completion.

I have no idea how this ever worked, and on recent kernels it causes
an oops in handle_tape_event() when we access the non-initialised
completion.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:26:14 +11:00
Jiri Slaby
4bf936b9e4 powerpc: Use helpers for rlimits
Make sure compiler won't do weird things with limits. E.g. fetching
them twice may return 2 different values after writable limits are
implemented.

I.e. either use rlimit helpers added in
3e10e716ab
or ACCESS_ONCE if not applicable.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@ozlabs.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:20:08 +11:00
FUJITA Tomonori
46150a050f powerpc/pseries: Fix dlpar compile warning without CONFIG_PROC_DEVICETREE
cc1: warnings being treated as errors
arch/powerpc/platforms/pseries/dlpar.c: In function 'dlpar_attach_node':
arch/powerpc/platforms/pseries/dlpar.c:239: error: unused variable 'ent'
arch/powerpc/platforms/pseries/dlpar.c: In function 'dlpar_detach_node':
arch/powerpc/platforms/pseries/dlpar.c:271: error: unused variable 'prop'
arch/powerpc/platforms/pseries/dlpar.c:270: error: unused variable 'parent'
make[3]: *** [arch/powerpc/platforms/pseries/dlpar.o] Error 1

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:20:07 +11:00
Anton Blanchard
92cb3694dd powerpc/pseries: Fix xics interrupt affinity
Commit 57b150cce8 (irq: only update affinity if
->set_affinity() is sucessfull) broke xics irq affinity.

We need to use the cpumask passed in, instead of accessing ->affinity directly.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:20:07 +11:00
Albert Herranz
95cd34b42b powerpc/gc/wii: Remove get_irq_desc()
Fix the following build failures:

arch/powerpc/platforms/embedded6xx/flipper-pic.c: In function 'flipper_pic_map':
arch/powerpc/platforms/embedded6xx/flipper-pic.c:105: error: implicit declaration of function 'get_irq_desc'

arch/powerpc/platforms/embedded6xx/hlwd-pic.c: In function 'hlwd_pic_map':
arch/powerpc/platforms/embedded6xx/hlwd-pic.c:98: error: implicit declaration of function 'get_irq_desc'

These failures are caused by the changes introduced in commit
"powerpc: Remove get_irq_desc()". The reason these drivers were not
updated is that they weren't merged yet.

Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-21 11:12:14 +11:00
Albert Herranz
7ccec3e726 powerpc/gc/wii: hlwd-pic: convert irq_desc.lock to raw_spinlock
Fix the following build failures:

arch/powerpc/platforms/embedded6xx/hlwd-pic.c: In function 'hlwd_pic_irq_cascade':
arch/powerpc/platforms/embedded6xx/hlwd-pic.c:135: error: passing argument 1 of 'spin_lock' from incompatible pointer type
arch/powerpc/platforms/embedded6xx/hlwd-pic.c:137: error: passing argument 1 of 'spin_unlock' from incompatible pointer type
arch/powerpc/platforms/embedded6xx/hlwd-pic.c:145: error: passing argument 1 of 'spin_lock' from incompatible pointer type
arch/powerpc/platforms/embedded6xx/hlwd-pic.c:149: error: passing argument 1 of 'spin_unlock' from incompatible pointer type

These failures are caused by the changes introduced in commit
"genirq: Convert irq_desc.lock to raw_spinlock". The reason this driver
was not updated is that it wasn't merged yet.

Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-21 11:12:13 +11:00
Benjamin Herrenschmidt
2593f939a5 Merge commit 'kumar/next' into merge 2009-12-21 09:30:42 +11:00
Albert Herranz
698cd335a7 powerpc/gamecube/wii: Fix off-by-one error in ugecon/usbgecko_udbg
The retry logic in ug_putc() is broken.

If the TX fifo is not ready and the counter runs out it will have a
value of -1 and no transfer should be attempted. Also, a counter
with a value of 0 means that the TX fifo got ready in the last try
and the transfer should be attempted.

Reported-by: "Juha Leppanen" <juha_motorsportcom@luukku.com>
Signed-off-by: "Juha Leppanen" <juha_motorsportcom@luukku.com>
Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-18 15:13:57 +11:00
Yong Zhang
c3a6635939 powerpc/iseries: use DECLARE_COMPLETION_ONSTACK for non-constant completion
The _ONSTACK variant should be used for on-stack completion,
otherwise it will break lockdep.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@ozlabs.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-18 14:55:44 +11:00
Gautham R Shenoy
3d9b740b2d powerpc/pseries: Make declarations of cpu_hotplug_driver_lock() ANSI compatible.
And add the __acquires() and __releases() annotations, while at it.

Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-18 14:54:26 +11:00
Gautham R Shenoy
e9edb232d3 powerpc/pseries: Don't panic when H_PROD fails during cpu-online.
If an online-attempt on a CPU which has been offlined using H_CEDE
with an appropriate cede latency hint fails, don't panic.

Instead print the error message and let the __cpu_up() code notify the
CPU Hotplug framework of the failure, which in turn can notify the
other subsystem through CPU_UP_CANCELED.

Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-18 14:54:26 +11:00
Mel Gorman
8a55c4ba3e powerpc/pseries: Select XICS and PCI_MSI PSERIES
It's possible to set CONFIG_XICS without CONFIG_PCI_MSI. When that happens,
the kernel fails to build with

arch/powerpc/platforms/built-in.o: In function `.xics_startup':
xics.c:(.text+0x12f60): undefined reference to `.unmask_msi_irq' make: ***
[.tmp_vmlinux1] Error 1

Furthermore, as noted by Benjamin Herrenschmidt, "CONFIG_XICS should be
made invisible and selected by PSERIES."

This patch fixes PSERIES to select both options

Signed-off-by: Mel Gorman <mel[at]csn.ul.ie>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-18 14:54:25 +11:00
Roel Kluin
29827b02dc powerpc/85xx: Wrong variable returned on error
The wrong variable was returned in the case of an error.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-18 14:53:37 +11:00
Alexey Dobriyan
5c916a295f powerpc/iseries: Convert to proc_fops
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-18 14:53:37 +11:00
Robert Jennings
14b8a76b9d powerpc: Make the CMM memory hotplug aware
The Collaborative Memory Manager (CMM) module allocates individual pages
over time that are not migratable.  On a long running system this can
severely impact the ability to find enough pages to support a hotplug
memory remove operation.

This patch adds a memory isolation notifier and a memory hotplug notifier.
The memory isolation notifier will return the number of pages found in
the range specified.  This is used to determine if all of the used pages
in a pageblock are owned by the balloon (or other entities in the notifier
chain).  The hotplug notifier will free pages in the range which is to be
removed.  The priority of this hotplug notifier is low so that it will be
called near last, this helps avoids removing loaned pages in operations
that fail due to other handlers.

CMM activity will be halted when hotplug remove operations are active and
resume activity after a delay period to allow the hypervisor time to
adjust.

Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Brian King <brking@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Gerald Schaefer <geralds@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-18 14:53:36 +11:00
Linus Torvalds
5a865c0606 Merge branch 'for-33' of git://repo.or.cz/linux-kbuild
* 'for-33' of git://repo.or.cz/linux-kbuild: (29 commits)
  net: fix for utsrelease.h moving to generated
  gen_init_cpio: fixed fwrite warning
  kbuild: fix make clean after mismerge
  kbuild: generate modules.builtin
  genksyms: properly consider  EXPORT_UNUSED_SYMBOL{,_GPL}()
  score: add asm/asm-offsets.h wrapper
  unifdef: update to upstream revision 1.190
  kbuild: specify absolute paths for cscope
  kbuild: create include/generated in silentoldconfig
  scripts/package: deb-pkg: use fakeroot if available
  scripts/package: add KBUILD_PKG_ROOTCMD variable
  scripts/package: tar-pkg: use tar --owner=root
  Kbuild: clean up marker
  net: add net_tstamp.h to headers_install
  kbuild: move utsrelease.h to include/generated
  kbuild: move autoconf.h to include/generated
  drop explicit include of autoconf.h
  kbuild: move compile.h to include/generated
  kbuild: drop include/asm
  kbuild: do not check for include/asm-$ARCH
  ...

Fixed non-conflicting clean merge of modpost.c as per comments from
Stephen Rothwell (modpost.c had grown an include of linux/autoconf.h
that needed to be changed to generated/autoconf.h)
2009-12-17 07:23:42 -08:00
Linus Torvalds
a73611b6aa Merge branch 'next' of git://git.secretlab.ca/git/linux-2.6
* 'next' of git://git.secretlab.ca/git/linux-2.6: (23 commits)
  powerpc: fix up for mmu_mapin_ram api change
  powerpc: wii: allow ioremap within the memory hole
  powerpc: allow ioremap within reserved memory regions
  wii: use both mem1 and mem2 as ram
  wii: bootwrapper: add fixup to calc useable mem2
  powerpc: gamecube/wii: early debugging using usbgecko
  powerpc: reserve fixmap entries for early debug
  powerpc: wii: default config
  powerpc: wii: platform support
  powerpc: wii: hollywood interrupt controller support
  powerpc: broadway processor support
  powerpc: wii: bootwrapper bits
  powerpc: wii: device tree
  powerpc: gamecube: default config
  powerpc: gamecube: platform support
  powerpc: gamecube/wii: flipper interrupt controller support
  powerpc: gamecube/wii: udbg support for usbgecko
  powerpc: gamecube/wii: do not include PCI support
  powerpc: gamecube/wii: declare as non-coherent platforms
  powerpc: gamecube/wii: introduce GAMECUBE_COMMON
  ...

Fix up conflicts in arch/powerpc/mm/fsl_booke_mmu.c.

Hopefully even close to correctly.
2009-12-16 13:26:53 -08:00
Thomas Gleixner
239007b844 genirq: Convert irq_desc.lock to raw_spinlock
Convert locks which cannot be sleeping locks in preempt-rt to
raw_spinlocks.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
2009-12-14 23:55:33 +01:00
Thomas Gleixner
0199c4e68d locking: Convert __raw_spin* functions to arch_spin*
Name space cleanup. No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: linux-arch@vger.kernel.org
2009-12-14 23:55:32 +01:00
Thomas Gleixner
445c89514b locking: Convert raw_spinlock to arch_spinlock
The raw_spin* namespace was taken by lockdep for the architecture
specific implementations. raw_spin_* would be the ideal name space for
the spinlocks which are not converted to sleeping locks in preempt-rt.

Linus suggested to convert the raw_ to arch_ locks and cleanup the
name space instead of using an artifical name like core_spin,
atomic_spin or whatever

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: linux-arch@vger.kernel.org
2009-12-14 23:55:32 +01:00
Linus Torvalds
d0316554d3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (34 commits)
  m68k: rename global variable vmalloc_end to m68k_vmalloc_end
  percpu: add missing per_cpu_ptr_to_phys() definition for UP
  percpu: Fix kdump failure if booted with percpu_alloc=page
  percpu: make misc percpu symbols unique
  percpu: make percpu symbols in ia64 unique
  percpu: make percpu symbols in powerpc unique
  percpu: make percpu symbols in x86 unique
  percpu: make percpu symbols in xen unique
  percpu: make percpu symbols in cpufreq unique
  percpu: make percpu symbols in oprofile unique
  percpu: make percpu symbols in tracer unique
  percpu: make percpu symbols under kernel/ and mm/ unique
  percpu: remove some sparse warnings
  percpu: make alloc_percpu() handle array types
  vmalloc: fix use of non-existent percpu variable in put_cpu_var()
  this_cpu: Use this_cpu_xx in trace_functions_graph.c
  this_cpu: Use this_cpu_xx for ftrace
  this_cpu: Use this_cpu_xx in nmi handling
  this_cpu: Use this_cpu operations in RCU
  this_cpu: Use this_cpu ops for VM statistics
  ...

Fix up trivial (famous last words) global per-cpu naming conflicts in
	arch/x86/kvm/svm.c
	mm/slab.c
2009-12-14 09:58:24 -08:00
Albert Herranz
c0577eeee0 powerpc: wii: allow ioremap within the memory hole
Enable the flag that allows a platform to ioremap memory marked
as reserved.

This is currently needed on the Nintendo Wii video game console
due to the workaround introduced in "wii: use both mem1 and mem2 as ram".

This will no longer be needed when proper discontig memory support
for 32-bit PowerPC is added to the kernel.

Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-12 22:24:32 -07:00
Albert Herranz
de32400dd2 wii: use both mem1 and mem2 as ram
The Nintendo Wii video game console has two discontiguous RAM regions:
- MEM1: 24MB @ 0x00000000
- MEM2: 64MB @ 0x10000000

Unfortunately, the kernel currently does not support discontiguous RAM
memory regions on 32-bit PowerPC platforms.

This patch adds a series of workarounds to allow the use of the second
memory region (MEM2) as RAM by the kernel.
Basically, a single range of memory from the beginning of MEM1 to the
end of MEM2 is reported to the kernel, and a memory reservation is
created for the hole between MEM1 and MEM2.

With this patch the system is able to use all the available RAM and not
just ~27% of it.

This will no longer be needed when proper discontig memory support
for 32-bit PowerPC is added to the kernel.

Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-12 22:24:31 -07:00
Albert Herranz
d1d56f8c1d powerpc: gamecube/wii: early debugging using usbgecko
Add support for using the USB Gecko adapter as an early debugging
console on the Nintendo GameCube and Wii video game consoles.
The USB Gecko is a 3rd party memory card interface adapter that provides
a EXI (External Interface) to USB serial converter.

Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-12 22:24:31 -07:00
Albert Herranz
5a7ee3198d powerpc: wii: platform support
Add platform support for the Nintendo Wii video game console.

Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-12 22:24:30 -07:00
Albert Herranz
9c21025c78 powerpc: wii: hollywood interrupt controller support
Add support for the dual interrupt controller included in the "Hollywood"
chipset of the Nintendo Wii video game console.
This interrupt controller serves both the Broadway processor (as a cascade)
and the Starlet processor, and is used to manage interrupts for the
non-classic hardware.

Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-12 22:24:30 -07:00
Albert Herranz
e90d71d0f5 powerpc: gamecube: platform support
Add platform support for the Nintendo GameCube video game console.

Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-12 22:24:28 -07:00
Albert Herranz
028ee972f0 powerpc: gamecube/wii: flipper interrupt controller support
Add support for the interrupt controller included in the "Flipper"
chipset of the Nintendo GameCube video game console.
The same interrupt controller is also present in the "Hollywood" chipset
of the Nintendo Wii.

Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-12 22:24:28 -07:00
Albert Herranz
a166df0824 powerpc: gamecube/wii: udbg support for usbgecko
Add support for using the USB Gecko adapter via the udbg facility on
the Nintendo GameCube and Wii video game consoles.
The USB Gecko is a 3rd party memory card interface adapter that provides
a EXI (External Interface) to USB serial converter.

Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-12 22:24:27 -07:00
Albert Herranz
b91a143b10 powerpc: gamecube/wii: declare as non-coherent platforms
The processors bundled in the Nintendo GameCube and Wii video game consoles
require explicit cache handling when DMA engines are used.

Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-12 22:24:27 -07:00
Albert Herranz
bc161c7a67 powerpc: gamecube/wii: introduce GAMECUBE_COMMON
Add a config option GAMECUBE_COMMON to be used as a dependency for all
options common to the Nintendo GameCube and Wii video game consoles.

Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-12 22:24:26 -07:00
Linus Torvalds
09cea96caa Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (151 commits)
  powerpc: Fix usage of 64-bit instruction in 32-bit altivec code
  MAINTAINERS: Add PowerPC patterns
  powerpc/pseries: Track previous CPPR values to correctly EOI interrupts
  powerpc/pseries: Correct pseries/dlpar.c build break without CONFIG_SMP
  powerpc: Make "intspec" pointers in irq_host->xlate() const
  powerpc/8xx: DTLB Miss cleanup
  powerpc/8xx: Remove DIRTY pte handling in DTLB Error.
  powerpc/8xx: Start using dcbX instructions in various copy routines
  powerpc/8xx: Restore _PAGE_WRITETHRU
  powerpc/8xx: Add missing Guarded setting in DTLB Error.
  powerpc/8xx: Fixup DAR from buggy dcbX instructions.
  powerpc/8xx: Tag DAR with 0x00f0 to catch buggy instructions.
  powerpc/8xx: Update TLB asm so it behaves as linux mm expects.
  powerpc/8xx: Invalidate non present TLBs
  powerpc/pseries: Serialize cpu hotplug operations during deactivate Vs deallocate
  pseries/pseries: Add code to online/offline CPUs of a DLPAR node
  powerpc: stop_this_cpu: remove the cpu from the online map.
  powerpc/pseries: Add kernel based CPU DLPAR handling
  sysfs/cpu: Add probe/release files
  powerpc/pseries: Kernel DLPAR Infrastructure
  ...
2009-12-12 14:27:24 -08:00
Sam Ravnborg
273b281fa2 kbuild: move utsrelease.h to include/generated
Fix up all users of utsrelease.h

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-12 13:08:15 +01:00
Sam Ravnborg
96f13045b6 kbuild: drop include2/ used for O=... builds
There is no longer any use of the include2/ directory.
The generated files has moved to include/generated.

Drop all references to said directory.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-12 13:08:14 +01:00
Anton Vorontsov
87faaabb09 powerpc/83xx/suspend: Save and restore SICRL, SICRH and SCCR
We need to save SICRL, SICRH and SCCR registers on suspend, and restore
them on resume. Otherwise, we lose IO and clocks setup on MPC8315E-RDB
boards when ULPI USB PHY is used (non-POR setup).

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-12-10 19:56:41 -06:00
Anton Vorontsov
f25c525c14 powerpc/83xx/suspend: Clear deep_sleeping after devices resume
Currently 83xx PMC driver clears deep_sleeping variable very early,
before devices are resumed. This makes fsl_deep_sleep() unusable in
drivers' resume() callback.

Sure, drivers can store fsl_deep_sleep() value on suspend and use
the stored value on resume. But a better solution is to postpone
clearing the deep_sleeping variable, i.e. move it into finish()
callback.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-12-10 19:56:24 -06:00
Linus Torvalds
4ef58d4e2a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits)
  tree-wide: fix misspelling of "definition" in comments
  reiserfs: fix misspelling of "journaled"
  doc: Fix a typo in slub.txt.
  inotify: remove superfluous return code check
  hdlc: spelling fix in find_pvc() comment
  doc: fix regulator docs cut-and-pasteism
  mtd: Fix comment in Kconfig
  doc: Fix IRQ chip docs
  tree-wide: fix assorted typos all over the place
  drivers/ata/libata-sff.c: comment spelling fixes
  fix typos/grammos in Documentation/edac.txt
  sysctl: add missing comments
  fs/debugfs/inode.c: fix comment typos
  sgivwfb: Make use of ARRAY_SIZE.
  sky2: fix sky2_link_down copy/paste comment error
  tree-wide: fix typos "couter" -> "counter"
  tree-wide: fix typos "offest" -> "offset"
  fix kerneldoc for set_irq_msi()
  spidev: fix double "of of" in comment
  comment typo fix: sybsystem -> subsystem
  ...
2009-12-09 19:43:33 -08:00
Benjamin Herrenschmidt
bcd6acd51f Merge commit 'origin/master' into next
Conflicts:
	include/linux/kvm.h
2009-12-09 17:14:38 +11:00
Mark Nelson
49bd364713 powerpc/pseries: Track previous CPPR values to correctly EOI interrupts
At the moment when we EOI an interrupt we set the CPPR back to 0xFF
regardless of its previous value. This could lead to problems if we
take an interrupt with a priority of 5, but before EOIing it we get
an IPI which has a priority of 4. The problem is that at the moment
when we EOI the IPI we will set the CPPR to 0xFF, but it should
really be set back to 5 (the previous priority).

To keep track of the previous CPPR values we create the xics_cppr
structure that has an array for CPPR values and an index pointing
to the current priority. This can easily grow if new priorities get
added in the future.

This will also be useful because the partition adjunct option of
upcoming machines will update the H_XIRR hcall to accept the CPPR
as a parameter.

Signed-off-by: Mark Nelson <markn@au1.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-09 17:10:38 +11:00
Nathan Fontenot
275a64f604 powerpc/pseries: Correct pseries/dlpar.c build break without CONFIG_SMP
The recent patch to add cpu offline/online as part of the DLPAR
process for pseries causes a build break if CONFIG_SMP is not
defined.  Original patch here;
http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-November/078299.html

This corrects the build break by moving the online_node_cpus
and offline_node_cpus under the #ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
portions of dlpar.c.

This patch also slightly modifies the online_node_cpus and offline_node_cpus
routines to prepend dlpar_ to the them and make them static.  These two
routine are only used in the dlpar add/remove of cpus and these changes
should help clarify that.

Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-09 17:10:38 +11:00
Roman Fietze
40d50cf7ca powerpc: Make "intspec" pointers in irq_host->xlate() const
Writing a driver using SCLPC on the MPC5200B I detected, that the
intspec arrays to map irqs to Linux virq cannot be const, because the
mapping and xlate functions only take non const pointers. All those
functions do not modify the intspec, so a const pointer could be used.

Signed-off-by: Roman Fietze <roman.fietze@telemotive.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-09 17:10:37 +11:00
Benjamin Herrenschmidt
8c82da5e24 Merge commit 'gcl/next' into next 2009-12-09 17:10:22 +11:00
Gautham R Shenoy
51badebdcf powerpc/pseries: Serialize cpu hotplug operations during deactivate Vs deallocate
Currently the cpu-allocation/deallocation process comprises of two steps:
- Set the indicators and to update the device tree with DLPAR node
  information.

- Online/offline the allocated/deallocated CPU.

This is achieved by writing to the sysfs tunables "probe" during allocation
and "release" during deallocation.

At the sametime, the userspace can independently online/offline the CPUs of
the system using the sysfs tunable "online".

It is quite possible that when a userspace tool offlines a CPU
for the purpose of deallocation and is in the process of updating the device
tree, some other userspace tool could bring the CPU back online by writing to
the "online" sysfs tunable thereby causing the deallocate process to fail.

The solution to this is to serialize writes to the "probe/release" sysfs
tunable with the writes to the "online" sysfs tunable.

This patch employs a mutex to provide this serialization, which is a no-op on
all architectures except PPC_PSERIES

Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-09 17:09:36 +11:00
Gautham R Shenoy
b6db63d1a7 pseries/pseries: Add code to online/offline CPUs of a DLPAR node
Currently the cpu-allocation/deallocation on pSeries is a
two step process from the Userspace.

- Set the indicators and update the device tree by writing to the sysfs
  tunable "probe" during allocation and "release" during deallocation.
- Online / Offline the CPUs of the allocated/would_be_deallocated node by
  writing to the sysfs tunable "online".

This patch adds kernel code to online/offline the CPUs soon_after/just_before
they have been allocated/would_be_deallocated. This way, the userspace tool
that performs DLPAR operations would only have to deal with one set of sysfs
tunables namely "probe" and release".

Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Acked-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-09 17:09:35 +11:00
Nathan Fontenot
1a8061c46c powerpc/pseries: Add kernel based CPU DLPAR handling
This patch adds the specific routines to probe and release (add and remove)
cpu resource for the powerpc pseries platform and registers these handlers
with the ppc_md callout structure.

Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-09 17:09:34 +11:00
Nathan Fontenot
ab519a011c powerpc/pseries: Kernel DLPAR Infrastructure
The Dynamic Logical Partitioning capabilities of the powerpc pseries platform
allows for the addition and removal of resources (i.e. CPU's, memory, and PCI
devices) from a partition. The removal of a resource involves
removing the resource's node from the device tree and then returning the
resource to firmware via the rtas set-indicator call.  To add a resource, it
is first obtained from firmware via the rtas set-indicator call and then a
new device tree node is created using the ibm,configure-coinnector rtas call
and added to the device tree.

This patch provides the kernel DLPAR infrastructure in a new filed named
dlpar.c.  The functionality provided is for acquiring and releasing a resource
from firmware and the parsing of information returned from the
ibm,configure-connector rtas call.  Additionally this exports the pSeries
reconfiguration notifier chain so that it can be invoked when device tree
updates are made.

Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-09 17:09:32 +11:00
Jiri Kosina
d014d04386 Merge branch 'for-next' into for-linus
Conflicts:

	kernel/irq/chip.c
2009-12-07 18:36:35 +01:00
Jean Delvare
6dfa5ca3c9 i2c-powermac: Include the i2c_adapter in struct pmac_i2c_bus
Include the i2c_adapter in struct pmac_i2c_bus. This avoids memory
fragmentation and allows for several code cleanups.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Michel Daenzer <michel@daenzer.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-06 17:06:19 +01:00
André Goddard Rosa
af901ca181 tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:55 +01:00
Benjamin Herrenschmidt
7d6709a208 powerpc: Fix build of some FSL platforms
Commit 87ec0e98cf in kumar's next branch
broke one of my test configs since it looks like Anton forgot about
that mpc832x_rdb platform which still uses the old style probing for
the SPI stuff.

I'll let them do a cleaner fix that probably involves changing the
probing method and getting rid of the platform device but for now
this will do to fix it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-11-24 17:00:27 +11:00
Gautham R Shenoy
3aa565f53c powerpc/pseries: Add hooks to put the CPU into an appropriate offline state
When a CPU is offlined on POWER currently, we call rtas_stop_self() and hand
the CPU back to the resource pool. This path is used for DLPAR which will
cause a change in the LPAR configuration which will be visible outside.

This patch changes the default state a CPU is put into when it is offlined.
On platforms which support ceding the processor to the hypervisor with
latency hint specifier value, during a cpu offline operation,
instead of calling rtas_stop_self(), we cede the vCPU to the hypervisor
while passing a latency hint specifier value. The Hypervisor can use this hint
to provide better energy savings. Also, during the offline
operation, the control of the vCPU remains with the LPAR as oppposed to
returning it to the resource pool.

The patch achieves this by creating an infrastructure to set the
preferred_offline_state() which can be either
- CPU_STATE_OFFLINE: which is the current behaviour of calling
  rtas_stop_self()

- CPU_STATE_INACTIVE: which cedes the vCPU to the hypervisor with the latency
  hint specifier.

The codepath which wants to perform a DLPAR operation can set the
preferred_offline_state() of a CPU to CPU_STATE_OFFLINE before invoking
cpu_down().

The patch also provides a boot-time command line argument to disable/enable
CPU_STATE_INACTIVE.

Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-11-24 14:33:04 +11:00
Gautham R Shenoy
69ddb57cbe powerpc/pseries: Add extended_cede_processor() helper function.
This patch provides an extended_cede_processor() helper function
which takes the cede latency hint as an argument. This hint is to be passed
on to the hypervisor to cede to the corresponding state on platforms
which support it.

Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Arun R Bharadwaj <arun@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-11-24 14:33:03 +11:00
Thomas Gleixner
b27df67248 powerpc: Fixup last users of irq_chip->typename
The typename member of struct irq_chip was kept for migration purposes
and is obsolete since more than 2 years. Fix up the leftovers.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linuxppc-dev@ozlabs.org
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-11-24 14:32:45 +11:00
Thomas Gleixner
293cfa44c3 powerpc: Replace old style lock initializer
SPIN_LOCK_UNLOCKED is deprecated. Init the lock array at runtime
instead.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linuxppc-dev@ozlabs.org
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-11-24 14:31:28 +11:00
roel kluin
17e3767561 powerpc/spufs: Fix test in spufs_switch_log_read()
size_t len cannot be less than 0.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-11-24 14:31:25 +11:00
Kumar Gala
ab2f489294 powerpc/p4080: Add basic support for p4080ds platform
Add basic support for the P4080 DS reference board.  None of the data
path devices (ethernet, crypto, pme) are support at this time.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-20 16:45:38 -06:00
Martyn Welch
3bc265627a powerpc/86xx: Support for NVRAM on GE Fanuc's PPC9A
Add support for NVRAM on GE Fanuc's PPC9A.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-20 16:45:37 -06:00
Martyn Welch
9093067ad1 powerpc/86xx: Support for NVRAM on GE Fanuc's SBC310
Add support for NVRAM on GE Fanuc's SBC310.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-20 16:45:36 -06:00
Martyn Welch
0d81df8701 powerpc/86xx: Enable NVRAM on GE Fanuc's SBC610
This patch enables the NVRAM found on the GE Fanuc SBC610

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-20 16:45:35 -06:00
Kumar Gala
5753c082f6 powerpc/85xx: Kconfig cleanup
Introduce new FSL_SOC_BOOKE Kconfig to handle both 85xx and QorIQ
based chips.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-20 16:45:27 -06:00
Ingo Molnar
0ffa798d94 Merge branches 'perf/powerpc' and 'perf/bench' into perf/core
Merge reason: Both 'perf bench' and the pending PowerPC changes
              are now ready for the next merge window.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-15 09:51:24 +01:00
Albrecht Dreß
eda43d16ef mpc52xx/wdt: merge WDT code into the GPT driver
Merge the WDT code into the GPT interface.

Signed-off-by: Albrecht Dreß <albrecht.dress@arcor.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-11-13 11:09:31 -07:00
Albrecht Dreß
690b846aa1 mpc5200/gpt: tiny fix for gpt period limitation
This patch changes the period parameter of mpc52xx_gpt_start_timer to
a u64 to support larger timeout periods.

Signed-off-by: Albrecht Dreß <albrecht.dress@arcor.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-11-12 13:31:35 -07:00
Anton Vorontsov
2e9d546eda powerpc/fsl: Make fsl_deep_sleep() usable w/ modules and non-83xx builds
Export is needed for modular builds, and a static inline stub is needed
for non-MPC83xx builds.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-11 21:43:33 -06:00
Anton Vorontsov
8c68e2f788 powerpc/86xx: Add power management support for MPC8610HPCD boards
This patch adds needed nodes and properties to support suspend/resume
on the MPC8610HPCD boards.

There is a dedicated switch (SW9) that is used to wake up the boards.
By default the SW9 button is routed to IRQ8, but could be re-routed
(via PIXIS) to sreset.

With 'no_console_suspend' kernel command line argument specified, the
board is also able to wakeup upon serial port input.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Scott Wood <scottwood@freescale.com> [dts]
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-11 21:43:30 -06:00
Anton Vorontsov
3cfee0aaa1 powerpc/85xx: Add power management support for MPC85xxMDS boards
- Add power management controller nodes;
- Add interrupts for RTC nodes, the RTC interrupt may be used as a
  wakeup source;
- Add sleep properties (DEVDISR bit mask) and sleep-nexus nodes.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-11 21:43:29 -06:00
Poonam Aggrwal
52dffd7fbf powerpc/85xx: Added P1020RDB Platform support.
P1020 is another member of Freescale QorIQ series of processors.
It is an e500 based dual core SOC.
Being a scaled down version of P2020 it has following differences from P2020:
- 533MHz - 800MHz core frequency.
- 256Kbyte L2 cache
- Ethernet controllers with classification capabilities(new controller).

From board perspective P1020RDB is same as P2020RDB.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-11 21:43:16 -06:00
Poonam Aggrwal
dc2e673dbc powerpc/85xx: Create dts for each core in CAMP mode for P2020RDB
This patch creates the dts files for each core and splits the devices
between the two cores for P2020RDB.

core0 has memory, L2, i2c, spi, dma1, usb, eth0, eth1, crypto,
		global-util, pci0,
core1 has L2, dma2, eth0, pci1, msi.

MPIC is shared between two cores but each core will protect its
interrupts from other core by using "protected-sources" of mpic.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-11 21:43:12 -06:00
Benjamin Herrenschmidt
0526484aa3 Merge commit 'origin/master' into next 2009-11-12 10:59:04 +11:00
Roel Kluin
58459a4e19 powerpc/82xx: kmalloc failure ignored in ep8248e_mdio_probe()
Prevent NULL dereference if kmalloc() fails. Also clean up if
of_mdiobus_register() returns an error.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-11-05 07:18:00 -06:00
Andre Detsch
8435b027b8 powerpc/pci: Fix regression in powerpc MSI-X
Patch f598282f51 exposed a problem in
powerpc MSI-X functionality, making network interfaces such as ixgbe
and cxgb3 stop to work when MSI-X is enabled. RX interrupts were not
being generated.

The problem was caused because MSI irq was not being effectively
unmasked after device initialization.

Signed-off-by: Andre Detsch <adetsch@br.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-11-05 17:06:27 +11:00
John Bonesio
3c9059d79f powerpc/5200: add LocalPlus bus FIFO device driver
This is a driver for the FIFO device on the LocalPlus bus on an mpc5200 system.
The driver supports programmed I/O through the FIFO as well as setting up DMA
via the BestComm engine through the FIFO.

Signed-off-by: John Bonesio <bones@secretlab.ca>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-11-04 16:42:47 -07:00
Grant Likely
4f59ecfa9b powerpc/5200: add general purpose timer API for the MPC5200
This patch adds an interface for controlling the timer function of the
MPC5200 GPT devices.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-11-04 16:42:33 -07:00
Benjamin Herrenschmidt
588e050887 powerpc/8xx: Fix build breakage with sparse irq changes
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-30 17:21:38 +11:00
Brian King
8be8cf5b47 powerpc: Add kdump support to Collaborative Memory Manager
When running Active Memory Sharing, the Collaborative Memory Manager (CMM)
may mark some pages as "loaned" with the hypervisor. Periodically, the
CMM will query the hypervisor for a loan request, which is a single signed
value. When kexec'ing into a kdump kernel, the CMM driver in the kdump
kernel is not aware of the pages the previous kernel had marked as "loaned",
so the hypervisor and the CMM driver are out of sync. Fix the CMM driver
to handle this scenario by ignoring requests to decrease the number of loaned
pages if we don't think we have any pages loaned. Pages that are marked as
"loaned" which are not in the balloon will automatically get switched to "active"
the next time we touch the page. This also fixes the case where totalram_pages
is smaller than min_mem_mb, which can occur during kdump.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-30 17:20:56 +11:00
Michael Ellerman
6cff46f4bc powerpc: Remove get_irq_desc()
get_irq_desc() is a powerpc-specific version of irq_to_desc(). That
is reason enough to remove it, but it also doesn't know about sparse
irq_desc support which irq_to_desc() does (when we enable it).

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-30 17:20:55 +11:00
Michael Ellerman
59e3f83702 powerpc/pseries: Use irq_has_action() in eeh_disable_irq()
Rather than open-coding our own check, use irq_has_action()
to check if an irq has an action - ie. is "in use".

irq_has_action() doesn't take the descriptor lock, but it
shouldn't matter - we're just using it as an indicator
that the irq is in use. disable_irq_nosync() will take
the descriptor lock before doing anything also.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-30 17:20:54 +11:00
Benjamin Herrenschmidt
3d541c4b7f powerpc/chrp: Use the same RTAS daemon as pSeries
The CHRP code has some fishy timer based code to scan the RTAS event
log, which uses a 1KB stack buffer and doesn't even use the results.

The pSeries code as a nicer daemon that allows userspace to read the
event log and basically uses the same RTAS interface

This patch moves rtasd.c out of platform/pseries and makes it usable
by CHRP, after removing the old crufty event log mechanism in there.

The nvram logging part of the daemon is still only available on 64-bit
since the underlying nvram management routines aren't currently shared.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-30 17:20:53 +11:00
Benjamin Herrenschmidt
188917e183 powerpc: Move /proc/ppc64 to /proc/powerpc and add symlink
Some of the stuff in /proc/ppc64 such as the RTAS bits are actually
useful to some 32-bit platforms. Rename the file, and create a
symlink on 64-bit for backward compatibility

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-30 17:20:53 +11:00
Michael Ellerman
7424639af4 powerpc/ps3: Use pr_devel() in ps3/mm.c
The non-debug case in ps3/mm.c uses pr_debug(), so that the compiler
still does type checks etc. and doesn't complain about unused
variables in the non-debug case.

However with DEBUG=n and CONFIG_DYNAMIC_DEBUG=y there's still code
generated for those pr_debugs().

size before:
   text    data     bss     dec     hex filename
  17553	   4112	     88	  21753	   54f9	arch/powerpc/platforms/ps3/mm.o

size after:
   text    data     bss     dec     hex filename
   7377	    776	     88	   8241	   2031	arch/powerpc/platforms/ps3/mm.o

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-30 17:20:52 +11:00
Tejun Heo
6b7487fc65 percpu: make percpu symbols in powerpc unique
This patch updates percpu related symbols in powerpc such that percpu
symbols are unique and don't clash with local symbols.  This serves
two purposes of decreasing the possibility of global percpu symbol
collision and allowing dropping per_cpu__ prefix from percpu symbols.

* arch/powerpc/kernel/perf_callchain.c: s/callchain/cpu_perf_callchain/

* arch/powerpc/kernel/setup-common.c: s/pvr/cpu_pvr/

* arch/powerpc/platforms/pseries/dtl.c: s/dtl/cpu_dtl/

* arch/powerpc/platforms/cell/interrupt.c: s/iic/cpu_iic/

Partly based on Rusty Russell's "alloc_percpu: rename percpu vars
which cause name clashes" patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@ozlabs.org
2009-10-29 22:34:14 +09:00
Anton Blanchard
6f26353ca2 powerpc: tracing: Give hypervisor call tracepoints access to arguments
While most users of the hcall tracepoints will only want the opcode
and return code, some will want all the arguments.  To avoid the
complexity of using varargs we pass a pointer to the register save
area, which contains all the arguments.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-10-28 16:13:04 +11:00
Anton Blanchard
c8cd093a6e powerpc: tracing: Add hypervisor call tracepoints
Add hcall_entry and hcall_exit tracepoints.  This replaces the inline
assembly HCALL_STATS code and converts it to use the new tracepoints.

To keep the disabled case as quick as possible, we embed a status word
in the TOC so we can get at it with a single load.  By doing so we
keep the overhead at a minimum.  Time taken for a null hcall:

No tracepoint code:	135.79 cycles
Disabled tracepoints:	137.95 cycles

For reference, before this patch enabling HCALL_STATS resulted in a null
hcall of 201.44 cycles!

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-10-28 16:13:04 +11:00
Benjamin Herrenschmidt
40578fca24 Merge commit 'gcl/merge' into merge 2009-10-28 09:56:18 +11:00
Stephen Rothwell
171fb12570 powerpc/iseries: Remove compiler version dependent hack
The creation of the flattened device tree depended on the compiler
putting the constant strings for an object in a section with a
particular name.  This was changed with recent compilers.  Do this
explicitly instead.

Without this patch, iseries kernels may silently not boot when built with
some compilers.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-27 16:42:39 +11:00
Heiko Schocher
830cb6fafc mpc5200: support for the MAN mpc5200 based board mucmc52
- serial Console on PSC1
- 64MB SDRAM
- MTD CFI Flash
- Ethernet FEC
- IDE support

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-10-15 09:33:24 -06:00
Heiko Schocher
371bc96b89 mpc5200: support for the MAN mpc5200 based board uc101
- serial Console on PSC1
- 64MB SDRAM
- MTD CFI Flash
- Ethernet FEC
- I2C with PCF8563 and Temp. Sensor ADM9240
- IDE support

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-10-15 09:29:32 -06:00
Anton Blanchard
b6dcde5c74 powerpc: Fix hypervisor TLB batching
Profiling of a page fault scalability microbenchmark shows flush_hash_range
is not calling the batch hpte invalidate hcall (H_BULK_REMOVE).

It turns out we have a duplicate firmware feature for hcall-bulk and the
current setup code stops after finding the first match. This meant we never
batch and always do individual invalidates.

The patch below removes the duplicate and shifts FW_FEATURE_CMO to close
the gap. With the patch applied the single threaded page fault rate improves
from 217169 to 238755 per second on a POWER5 test box, a 10% improvement.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-14 16:58:37 +11:00
Michael Ellerman
aee7a283bb powerpc: Fix memory leak in axon_msi.c
cppcheck found a memory leak in axon_msi, if dcr_base or dcr_len are zero,
we have already allocated msic, so we should free it in the error path.

Signed-off-by: Eric Sesterhenn <eric.sesterhenn@lsexperts.de>
Acked-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-14 16:58:36 +11:00
Benjamin Herrenschmidt
11a50873ef powerpc/pmac: Fix issues with sleep on some powerbooks
Since the change of how interrupts are disabled during suspend,
certain PowerBook models started exhibiting various issues during
suspend or resume from sleep.

I finally tracked it down to the code that runs various "platform"
functions (kind of little scripts extracted from the device-tree),
which uses our i2c and PMU drivers expecting interrutps to work,
and at a time where with the new scheme, they have been disabled.

This causes timeouts internally which for some reason results in
the PMU being unable to see the trackpad, among other issues, really
it depends on the machine. Most of the time, we fail to properly adjust
some clocks for suspend/resume so the results are not always
predictable.

This patch fixes it by using IRQF_TIMER for both the PMU and the I2C
interrupts. I prefer doing it this way than moving the call sites since
I really want those platform functions to still be called after all
drivers (and before sysdevs).

We also do a slight cleanup to via-pmu.c driver to make sure the
ADB autopoll mask is handled correctly when doing bus resets

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-10-14 16:58:35 +11:00
Alexey Dobriyan
828c09509b const: constify remaining file_operations
[akpm@linux-foundation.org: fix KVM]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01 16:11:11 -07:00
Alexey Dobriyan
f0f37e2f77 const: mark struct vm_struct_operations
* mark struct vm_area_struct::vm_ops as const
* mark vm_ops in AGP code

But leave TTM code alone, something is fishy there with global vm_ops
being used.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-27 11:39:25 -07:00
Becky Bruce
738ef42e32 powerpc: Change archdata dma_data to a union
Sometimes this is used to hold a simple offset, and sometimes
it is used to hold a pointer.  This patch changes it to a union containing
void * and dma_addr_t.  get/set accessors are also provided, because it was
getting a bit ugly to get to the actual data.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-09-24 15:31:43 +10:00
Rusty Russell
ea0f1cab6e cpumask: Use accessors for cpu_*_mask: powerpc
Use the accessors rather than frobbing bits directly (the new versions
are const).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Mike Travis <travis@sgi.com>
2009-09-24 09:34:48 +09:30
James Morris
88e9d34c72 seq_file: constify seq_operations
Make all seq_operations structs const, to help mitigate against
revectoring user-triggerable function pointers.

This is derived from the grsecurity patch, although generated from scratch
because it's simpler than extracting the changes from there.

Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 07:39:29 -07:00
Linus Torvalds
342ff1a1b5 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
  trivial: fix typo in aic7xxx comment
  trivial: fix comment typo in drivers/ata/pata_hpt37x.c
  trivial: typo in kernel-parameters.txt
  trivial: fix typo in tracing documentation
  trivial: add __init/__exit macros in drivers/gpio/bt8xxgpio.c
  trivial: add __init macro/ fix of __exit macro location in ipmi_poweroff.c
  trivial: remove unnecessary semicolons
  trivial: Fix duplicated word "options" in comment
  trivial: kbuild: remove extraneous blank line after declaration of usage()
  trivial: improve help text for mm debug config options
  trivial: doc: hpfall: accept disk device to unload as argument
  trivial: doc: hpfall: reduce risk that hpfall can do harm
  trivial: SubmittingPatches: Fix reference to renumbered step
  trivial: fix typos "man[ae]g?ment" -> "management"
  trivial: media/video/cx88: add __init/__exit macros to cx88 drivers
  trivial: fix typo in CONFIG_DEBUG_FS in gcov doc
  trivial: fix missing printk space in amd_k7_smp_check
  trivial: fix typo s/ketymap/keymap/ in comment
  trivial: fix typo "to to" in multiple files
  trivial: fix typos in comments s/DGBU/DBGU/
  ...
2009-09-22 07:51:45 -07:00
Alexey Dobriyan
6e1d5dcc2b const: mark remaining inode_operations as const
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:24 -07:00
Alexey Dobriyan
b87221de6a const: mark remaining super_operations const
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:24 -07:00
Linus Torvalds
43c1266ce4 Merge branch 'perfcounters-rename-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perfcounters-rename-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf: Tidy up after the big rename
  perf: Do the big rename: Performance Counters -> Performance Events
  perf_counter: Rename 'event' to event_id/hw_event
  perf_counter: Rename list_entry -> group_entry, counter_list -> group_list

Manually resolved some fairly trivial conflicts with the tracing tree in
include/trace/ftrace.h and kernel/trace/trace_syscalls.c.
2009-09-21 09:15:07 -07:00
Anand Gadiyar
411c940385 trivial: fix typo "for for" in multiple files
trivial: fix typo "for for" in multiple files

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-21 15:14:54 +02:00
Ingo Molnar
cdd6c482c9 perf: Do the big rename: Performance Counters -> Performance Events
Bye-bye Performance Counters, welcome Performance Events!

In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.

Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.

All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)

The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.

Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.

User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)

This patch has been generated via the following script:

  FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')

  sed -i \
    -e 's/PERF_EVENT_/PERF_RECORD_/g' \
    -e 's/PERF_COUNTER/PERF_EVENT/g' \
    -e 's/perf_counter/perf_event/g' \
    -e 's/nb_counters/nb_events/g' \
    -e 's/swcounter/swevent/g' \
    -e 's/tpcounter_event/tp_event/g' \
    $FILES

  for N in $(find . -name perf_counter.[ch]); do
    M=$(echo $N | sed 's/perf_counter/perf_event/g')
    mv $N $M
  done

  FILES=$(find . -name perf_event.*)

  sed -i \
    -e 's/COUNTER_MASK/REG_MASK/g' \
    -e 's/COUNTER/EVENT/g' \
    -e 's/\<event\>/event_id/g' \
    -e 's/counter/event/g' \
    -e 's/Counter/Event/g' \
    $FILES

... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.

Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.

( NOTE: 'counters' are still the proper terminology when we deal
  with hardware registers - and these sed scripts are a bit
  over-eager in renaming them. I've undone some of that, but
  in case there's something left where 'counter' would be
  better than 'event' we can undo that on an individual basis
  instead of touching an otherwise nicely automated patch. )

Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 14:28:04 +02:00
Christoph Hellwig
fc5377668c tracing: Remove markers
Now that the last users of markers have migrated to the event
tracer we can kill off the (now orphan) support code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20090917173527.GA1699@lst.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-18 21:22:08 +02:00
Linus Torvalds
4406c56d0a Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (75 commits)
  PCI hotplug: clean up acpi_run_hpp()
  PCI hotplug: acpiphp: use generic pci_configure_slot()
  PCI hotplug: shpchp: use generic pci_configure_slot()
  PCI hotplug: pciehp: use generic pci_configure_slot()
  PCI hotplug: add pci_configure_slot()
  PCI hotplug: clean up acpi_get_hp_params_from_firmware() interface
  PCI hotplug: acpiphp: don't cache hotplug_params in acpiphp_bridge
  PCI hotplug: acpiphp: remove superfluous _HPP/_HPX evaluation
  PCI: Clear saved_state after the state has been restored
  PCI PM: Return error codes from pci_pm_resume()
  PCI: use dev_printk in quirk messages
  PCI / PCIe portdrv: Fix pcie_portdrv_slot_reset()
  PCI Hotplug: convert acpi_pci_detect_ejectable() to take an acpi_handle
  PCI Hotplug: acpiphp: find bridges the easy way
  PCI: pcie portdrv: remove unused variable
  PCI / ACPI PM: Propagate wake-up enable for devices w/o ACPI support
  ACPI PM: Replace wakeup.prepared with reference counter
  PCI PM: Introduce device flag wakeup_prepared
  PCI / ACPI PM: Rework some debug messages
  PCI PM: Simplify PCI wake-up code
  ...

Fixed up conflict in arch/powerpc/kernel/pci_64.c due to OF device tree
scanning having been moved and merged for the 32- and 64-bit cases.  The
'needs_freset' initialization added in 6e19314cc ("PCI/powerpc: support
PCIe fundamental reset") is now in arch/powerpc/kernel/pci_of_scan.c.
2009-09-16 07:49:54 -07:00
Linus Torvalds
723e9db7a4 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (134 commits)
  powerpc/nvram: Enable use Generic NVRAM driver for different size chips
  powerpc/iseries: Fix oops reading from /proc/iSeries/mf/*/cmdline
  powerpc/ps3: Workaround for flash memory I/O error
  powerpc/booke: Don't set DABR on 64-bit BookE, use DAC1 instead
  powerpc/perf_counters: Reduce stack usage of power_check_constraints
  powerpc: Fix bug where perf_counters breaks oprofile
  powerpc/85xx: Fix SMP compile error and allow NULL for smp_ops
  powerpc/irq: Improve nanodoc
  powerpc: Fix some late PowerMac G5 with PCIe ATI graphics
  powerpc/fsl-booke: Use HW PTE format if CONFIG_PTE_64BIT
  powerpc/book3e: Add missing page sizes
  powerpc/pseries: Fix to handle slb resize across migration
  powerpc/powermac: Thermal control turns system off too eagerly
  powerpc/pci: Merge ppc32 and ppc64 versions of phb_scan()
  powerpc/405ex: support cuImage via included dtb
  powerpc/405ex: provide necessary fixup function to support cuImage
  powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC
  powerpc/44x: Add Eiger AMCC (AppliedMicro) PPC460SX evaluation board support.
  powerpc/44x: Update Arches defconfig
  powerpc/44x: Update Arches dts
  ...

Fix up conflicts in drivers/char/agp/uninorth-agp.c
2009-09-15 09:51:09 -07:00
Linus Torvalds
ada3fa1505 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (46 commits)
  powerpc64: convert to dynamic percpu allocator
  sparc64: use embedding percpu first chunk allocator
  percpu: kill lpage first chunk allocator
  x86,percpu: use embedding for 64bit NUMA and page for 32bit NUMA
  percpu: update embedding first chunk allocator to handle sparse units
  percpu: use group information to allocate vmap areas sparsely
  vmalloc: implement pcpu_get_vm_areas()
  vmalloc: separate out insert_vmalloc_vm()
  percpu: add chunk->base_addr
  percpu: add pcpu_unit_offsets[]
  percpu: introduce pcpu_alloc_info and pcpu_group_info
  percpu: move pcpu_lpage_build_unit_map() and pcpul_lpage_dump_cfg() upward
  percpu: add @align to pcpu_fc_alloc_fn_t
  percpu: make @dyn_size mandatory for pcpu_setup_first_chunk()
  percpu: drop @static_size from first chunk allocators
  percpu: generalize first chunk allocator selection
  percpu: build first chunk allocators selectively
  percpu: rename 4k first chunk allocator to page
  percpu: improve boot messages
  percpu: fix pcpu_reclaim() locking
  ...

Fix trivial conflict as by Tejun Heo in kernel/sched.c
2009-09-15 09:39:44 -07:00
Benjamin Herrenschmidt
1d6ed32226 powerpc/iseries: Fix oops reading from /proc/iSeries/mf/*/cmdline
That code uses dma_mapping_error() with a NULL device, which is
a bad idea :-) The proper fix might be to start using some kind
of pseudo device for all these low level mappings with the
hypervisor but that will be for another day. Since it directly
calls into the low level iommu code, I see no problem in having
it directly test against DMA_ERROR_CODE instead of using the
accessors with a NULL argument for now.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-09-11 16:01:15 +10:00
Paul Mackerras
a6dbf93a2a powerpc: Fix bug where perf_counters breaks oprofile
Currently there is a bug where if you use oprofile on a pSeries
machine, then use perf_counters, then use oprofile again, oprofile
will not work correctly; it will lose the PMU configuration the next
time the hypervisor does a partition context switch, and thereafter
won't count anything.

Maynard Johnson identified the sequence causing the problem:
- oprofile setup calls ppc_enable_pmcs(), which calls
  pseries_lpar_enable_pmcs, which tells the hypervisor that we want
  to use the PMU, and sets the "PMU in use" flag in the lppaca.
  This flag tells the hypervisor whether it needs to save and restore
  the PMU config.
- The perf_counter code sets and clears the "PMU in use" flag directly
  as it context-switches the PMU between tasks, and leaves it clear
  when it finishes.
- oprofile setup, called for a new oprofile run, calls ppc_enable_pmcs,
  which does nothing because it has already been called.  In particular
  it doesn't set the "PMU in use" flag.

This fixes the problem by arranging for ppc_enable_pmcs to always set
the "PMU in use" flag.  It makes the perf_counter code call
ppc_enable_pmcs also rather than calling the lower-level function
directly, and removes the setting of the "PMU in use" flag from
pseries_lpar_enable_pmcs, since that is now done in its caller.

This also removes the declaration of pasemi_enable_pmcs because it
isn't defined anywhere.

Reported-by: Maynard Johnson <mpjohn@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: <stable@kernel.org)
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-09-11 11:27:58 +10:00
Kumar Gala
757cbd46d1 powerpc/85xx: Fix SMP compile error and allow NULL for smp_ops
The following commit introduced a compile error since it removed
the implementation of smp_85xx_basic_setup:

commit 77c0a700c1
Author: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date:   Fri Aug 28 14:25:04 2009 +1000

    powerpc: Properly start decrementer on BookE secondary CPUs

Make it so that smp_ops probe() and setup_cpu() can be set to NULL.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-09-11 11:27:57 +10:00
Mike Mason
6e19314cc9 PCI/powerpc: support PCIe fundamental reset
By default, the EEH framework on powerpc does what's known as a "hot
reset" during recovery of a PCI Express device.  We've found a case
where the device needs a "fundamental reset" to recover properly.  The
current PCI error recovery and EEH frameworks do not support this
distinction.

The attached patch makes changes to EEH to utilize the new bit field.

Signed-off-by: Mike Mason <mmlnx@us.ibm.com>
Signed-off-by: Richard Lary <rlary@us.ibm.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09 13:29:41 -07:00
Benjamin Herrenschmidt
cede3930f0 powerpc: Fix some late PowerMac G5 with PCIe ATI graphics
A misconfiguration by the firmware of the U4 PCIe bridge on PowerMac G5
with the U4 bridge (latest generations, may also affect the iMac G5
"iSight") is causing us to re-assign the PCI BARs of the video card,
which can get it out of sync with the firmware, thus breaking offb.

This works around it by fixing up the bridge configuration properly
at boot time. It also fixes a bug where the firmware provides us with
an incorrect set of accessible regions in the device-tree.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-09-02 16:20:42 +10:00
Brian King
46db2f86a3 powerpc/pseries: Fix to handle slb resize across migration
The SLB can change sizes across a live migration, which was not
being handled, resulting in possible machine crashes during
migration if migrating to a machine which has a smaller max SLB
size than the source machine. Fix this by first reducing the
SLB size to the minimum possible value, which is 32, prior to
migration. Then during the device tree update which occurs after
migration, we make the call to ensure the SLB gets updated. Also
add the slb_size to the lparcfg output so that the migration
tools can check to make sure the kernel has this capability
before allowing migration in scenarios where the SLB size will change.

BenH: Fixed #include <asm/mmu-hash64.h> -> <asm/mmu.h> to avoid
      breaking ppc32 build

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-09-02 16:19:01 +10:00
Grant Likely
0ed2c722c6 powerpc/pci: Merge ppc32 and ppc64 versions of phb_scan()
The two versions are doing almost exactly the same thing.  No need to
maintain them as separate files.  This patch also has the side effect
of making the PCI device tree scanning code available to 32 bit powerpc
machines, but no board ports actually make use of this feature at this
point.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-09-02 15:45:53 +10:00
Solomon Peachy
0cdf50a7c6 powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC
This patch adds support for the ESTeem 195E Hotfoot SBC.

There are several variants of the SBC deployed, single/dual
ethernet+serial, and also 4MB/8MB flash variations.  In the interest of
having a single kernel image boot on all boards, the cuboot shim detects
the differences and mangles the DTS tree appropriately.

With the exception of the CF interface that was never populated on
production boards, this code/DTS supports all boardpop options.

Signed-off-by: Solomon Peachy <solomon@linux-wlan.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-08-31 09:15:51 -04:00
fkan@amcc.com
c9f75093a4 powerpc/44x: Add Eiger AMCC (AppliedMicro) PPC460SX evaluation board support.
This patch adds support for the AMCC (AppliedMicro) PPC460SX Eiger evaluation
board.

Signed-off-by: Tai Tri Nguyen <ttnguyen@amcc.com>
Acked-by: Feng Kan <fkan@amcc.com>
Acked-by: Tirumala Marri <tmarri@amcc.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-08-31 08:24:15 -04:00
Benjamin Herrenschmidt
77c0a700c1 powerpc: Properly start decrementer on BookE secondary CPUs
This moves the code to start the decrementer on 40x and BookE into
a separate function which is now called from time_init() and
secondary_time_init(), before the respective clock sources are
registered. We also remove the 85xx specific code for doing it
from the platform code.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-28 14:25:04 +10:00
FUJITA Tomonori
45223c5492 powerpc: use dma_map_ops struct
This converts uses dma_map_ops struct (in include/linux/dma-mapping.h)
instead of POWERPC homegrown dma_mapping_ops.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-28 14:24:10 +10:00
FUJITA Tomonori
3702977fa7 powerpc: Remove swiotlb_pci_dma_ops
Now swiotlb_pci_dma_ops is identical to swiotlb_dma_ops; we can use
swiotlb_dma_ops with any devices. This removes swiotlb_pci_dma_ops.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-28 14:24:09 +10:00
FUJITA Tomonori
762afb7317 powerpc: Remove addr_needs_map in struct dma_mapping_ops
This patch adds max_direct_dma_addr to struct dev_archdata to remove
addr_needs_map in struct dma_mapping_ops. It also converts
dma_capable() to use max_direct_dma_addr.

max_direct_dma_addr is initialized in pci_dma_dev_setup_swiotlb(),
called via ppc_md.pci_dma_dev_setup hook.

For further information:
http://marc.info/?t=124719060200001&r=1&w=2

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-28 14:24:09 +10:00
Geert Uytterhoeven
7b6a09f3d6 powerpc/ps3: Add missing check for PS3 to rtc-ps3 platform device registration
On non-PS3, we get:

| kernel BUG at drivers/rtc/rtc-ps3.c:36!

because the rtc-ps3 platform device is registered unconditionally in a kernel
with builtin support for PS3.

Reported-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-27 13:25:46 +10:00
Benjamin Herrenschmidt
3c2ee2d9f4 Merge commit 'kumar/next' into next 2009-08-27 13:13:41 +10:00
Bastian Blank
6fdc31a2b8 powerpc: Remove SMP warning from PowerMac cpufreq
On Thu, Aug 13, 2009 at 04:14:58PM +1000, Benjamin Herrenschmidt wrote:
> On Tue, 2009-08-11 at 11:39 +0200, Bastian Blank wrote:
> > This patch just disables this driver on SMP kernels, as it is obviously
> > not supported.
> Why not remove the #error instead ? :-) I don't think it's still
> meaningful, especially since we use the timebase for delays nowadays
> which doesn't depend on the CPU frequency...

Your call. Take this one:

The build of a PowerMac 32bit kernel currently fails with

error: #warning "WARNING, CPUFREQ not recommended on SMP kernels"

Thie patch removes the not longer applicable SMP warning from the
PowerMac cpufreq code.

Signed-off-by: Bastian Blank <waldi@debian.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-27 13:12:53 +10:00
Anton Vorontsov
9b9d401b8d powerpc/85xx: Add QE USB support for MPC8569E-MDS boards
- Add gpio-controller node for BCSR17, it is used to control USB
  speed and VBUS;
- Add timer node for QE GTM, needed for USB host;
- Add usb node itself;
- Add some probing code for BCSR GPIOs.

NOTE: QE USB doesn't work on prototype boards, but should work on
      pilot boards if specs and schematics are correct, though we
      don't have the pilot boards to actually test it.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-25 09:44:10 -05:00
Anton Vorontsov
818fcac554 powerpc/82xx: Add CPM USB Gadget support for MPC8272ADS boards
- Add usb node;
- Configure pins and clocks;
- Enable USB function in BCSR.

The support was successfully tested using serial and ethernet gadget
drivers.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-25 09:44:06 -05:00
Anton Vorontsov
a70e88bc78 powerpc/82xx: Fix BCSR bits for MPC8272ADS boards
mpc8272_ads.c is using BCSR bits definitions from pq2ads.h, but
according to User's Guide the bits are wrong for MPC8272ADS boards
(I guess definitions from pq2ads should only be used for PQ2FADS
boards).

So, let's introduce our own definitions for MPC8272ADS, and don't
include pq2ads.h.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-25 09:44:02 -05:00
Liang Li
7792da8567 powerpc/85xx: sbc8560 - Fix warm reboot with board specific reset function
The existing fsl_rstcr_restart function is not applicable to the
mpc8560. The Global Utilities Block on this earlier CPU doesn't have
the control/reset register at 0xe00b0.  This implements a board
specific reset function that uses the RCR(Reset Control Register) of
the sbc8560's EPLD to do a reset.

Signed-off-by: Liang Li <Liang.Li@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-24 20:48:12 -05:00
Poonam Aggrwal
fb8e3e1fe1 powerpc/85xx: Add support for P2020RDB board
Add support for the P2020RDB reference board from Freescale.

Overview of P2020RDB platform
	- DDR
	  DDR2 1G
	- NOR Flash
	  16MByte
	- NAND Flash
	  32MByte
	- 3 Ethernet interfaces
	  1) etSEC1
		- RGMII
		- connected to a 5 port Vitesse Switch(VSC7385)
		- Switch is memory mapped through eLBC interface(CS#2)
		- IRQ1
	  2) etSEC2
		- SGMII
		- connected to VSC8221
		- IRQ2
	  3) etSEC3
		- RGMII
		- connected to VSC8641
		- IRQ3
	- 2 1X PCIe interfaces
	- SD/MMC ,USB
	- SPI EEPROM
	- Serial I2C EEPROM

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-08-24 20:48:06 -05:00
Geert Uytterhoeven
9413c8836a powerpc/cell: Move CBE_IOPTE_* to <asm/cell-regs.h>
As <asm/iommu.h> doesn't contain any other hardware specific definitions
but only interfaces.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:29:26 +10:00
roel kluin
02a606c2c4 powerpc: Missing tests for NULL after ioremap()
Missing tests after ioremap()

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:29:25 +10:00
Stoyan Gaydarov
a888ad451a powerpc: ARRAY_SIZE changes in pasemi and powermac code
These changes were a direct result of using a semantic patch
More information can be found at http://www.emn.fr/x-info/coccinelle/

Signed-off-by: Stoyan Gaydarov <sgayda2@uiuc.edu>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:29:23 +10:00
Christoph Hellwig
ae142e0c52 powerpc/sputrace: Use the generic event tracer
I wrote sputrace before generic tracing infrastrucure was available.
Now that we have the generic event tracer we can convert it over and
remove a lot of code:

  8 files changed, 45 insertions(+), 285 deletions(-)

To use it make sure CONFIG_EVENT_TRACING is enabled and then enable
the spufs trace channel by

  echo 1 > /sys/kernel/debug/tracing/events/spufs/spufs_context/enable

and then read the trace records using e.g.

  cat /sys/kernel/debug/tracing/trace

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:29:21 +10:00
Martyn Welch
2eaa50e967 powerpc/86xx: Correct reading of information presented in cpuinfo
/proc/cpuinfo should be showing the boards revision and the revision of
the FPGA fitted. The functions currently used to access this information
as incorrect.

Additionally the VME geographical address of the PPC9A and it's status as
system contoller are available in the board registers. Show these in
cpuinfo.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:27:55 +10:00
Anton Vorontsov
89f3729642 powerpc/83xx: Add eSDHC support for MPC837xE-RDB/WLAN boards
Actually, the support is already there, but it requires newer U-Boots
(to fill-in clock-frequency, and setup pin multiplexing).

Though, it appears that on RDB boards USBB pins aren't multiplexed
between USB and eSDHC (unlike MDS boards, where USB and eSDHC share
pctl and pwrfault pins).

So, for RDB boards we can safely setup pinmux and manually fill-in
clock-frequency, thus making eSDHC work even with older u-boots.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:27:51 +10:00
Anton Vorontsov
fda4bd9bac powerpc/83xx: Add support for MPC8377E-WLAN boards
MPC8377E-WLAN are basically RDB boards except:

- RAM extended to 512 MB;
- NAND flash removed, NOR flash extended to 64 MB;
- Vitesse VSC7385 5-port switch removed, RTL8211B PHY added;
- Power management MCU removed;
- PCI slot removed, another mini-PCI slot added (IRQ routing changed);
- USB3300 PHY's ID pin grounded, thus USB port is host-only.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:27:43 +10:00
Heiko Schocher
9239c89bc9 powerpc/82xx: mgcoge - updates for 2.6.32
- add I2C support
- add FCC1 and FCC2 support
- fix bogus gpio numbering in plattform code

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:27:30 +10:00
Benjamin Herrenschmidt
2d27cfd328 powerpc: Remaining 64-bit Book3E support
This contains all the bits that didn't fit in previous patches :-) This
includes the actual exception handlers assembly, the changes to the
kernel entry, other misc bits and wiring it all up in Kconfig.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:25:11 +10:00
Benjamin Herrenschmidt
cf54dc7cd4 powerpc: Move definitions of secondary CPU spinloop to header file
Those definitions are currently declared extern in the .c file where
they are used, move them to a header file instead.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:12:44 +10:00
Benjamin Herrenschmidt
527b363961 powerpc/pmac: Fix PowerSurge SMP IPI allocation
The code for setting up the IPIs for SMP PowerSurge marchines bitrot,
it needs to properly map the HW interrupt number

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:12:31 +10:00
roel kluin
2e2ddb24d3 powerpc/cell: Replace strncpy by strlcpy
Replace strncpy() and explicit null-termination by strlcpy()

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:12:29 +10:00
Benjamin Herrenschmidt
c5a8c0c99f powerpc: Remove use of a second scratch SPRG in STAB code
The STAB code used on Power3 and RS/64 uses a second scratch SPRG to
save a GPR in order to decide whether to go to do_stab_bolted_* or
to handle a normal data access exception.

This prevents our scheme of freeing SPRG3 which is user visible for
user uses since we cannot use SPRG0 which, on RS/64, seems to be
read-only for supervisor mode (like POWER4).

This reworks the STAB exception entry to use the PACA as temporary
storage instead.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:12:28 +10:00
Benjamin Herrenschmidt
ee43eb788b powerpc: Use names rather than numbers for SPRGs (v2)
The kernel uses SPRG registers for various purposes, typically in
low level assembly code as scratch registers or to hold per-cpu
global infos such as the PACA or the current thread_info pointer.

We want to be able to easily shuffle the usage of those registers
as some implementations have specific constraints realted to some
of them, for example, some have userspace readable aliases, etc..
and the current choice isn't always the best.

This patch should not change any code generation, and replaces the
usage of SPRN_SPRGn everywhere in the kernel with a named replacement
and adds documentation next to the definition of the names as to
what those are used for on each processor family.

The only parts that still use the original numbers are bits of KVM
or suspend/resume code that just blindly needs to save/restore all
the SPRGs.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:12:27 +10:00
Benjamin Herrenschmidt
8aa34ab8b2 powerpc: Rename exception.h to exception-64s.h
The file include/asm/exception.h contains definitions
that are specific to exception handling on 64-bit server
type processors.

This renames the file to exception-64s.h to reflect that
fact and avoid confusion.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:12:26 +10:00
Gerhard Pircher
66dc3304f3 powerpc/amigaone: Convert amigaone_init() to a machine_device_initcall()
This allows to remove the ppc_md.init() hook in the setup code.

Signed-off-by: Gerhard Pircher <gerhard_pircher@gmx.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20 10:12:21 +10:00
Tejun Heo
384be2b18a Merge branch 'percpu-for-linus' into percpu-for-next
Conflicts:
	arch/sparc/kernel/smp_64.c
	arch/x86/kernel/cpu/perf_counter.c
	arch/x86/kernel/setup_percpu.c
	drivers/cpufreq/cpufreq_ondemand.c
	mm/percpu.c

Conflicts in core and arch percpu codes are mostly from commit
ed78e1e078dd44249f88b1dd8c76dafb39567161 which substituted many
num_possible_cpus() with nr_cpu_ids.  As for-next branch has moved all
the first chunk allocators into mm/percpu.c, the changes are moved
from arch code to mm/percpu.c.

Signed-off-by: Tejun Heo <tj@kernel.org>
2009-08-14 14:45:31 +09:00
Anton Vorontsov
c4673f9a32 powerpc/85xx: Fix ethernet link detection on MPC8569E-MDS boards
Linux isn't able to detect link changes on ethernet ports that were
used by U-Boot. This is because U-Boot wrongly clears interrupt
polarity bit (INTPOL, 0x400) in the extended status register (EXT_SR,
0x1b) of Marvell PHYs.

There is no easy way for PHY drivers to know IRQ line polarity (we
could extract it from the device tree and pass it to phydevs, but
that'll be quite a lot of work), so for now just reset the PHYs to
their default states.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-29 23:14:18 -05:00
Anton Vorontsov
ea96025a26 powerpc: Don't use alloc_bootmem() in init_IRQ() path
This patch fixes various badnesses like this for all interrupt
controllers:

------------[ cut here ]------------
Badness at c04db9dc [verbose debug info unavailable]
NIP: c04db9dc LR: c04db9ac CTR: 00000000
REGS: c053de30 TRAP: 0700   Not tainted  (2.6.31-rc1-00432-ge69b2b5-dirty)
MSR: 00021000 <ME,CE>  CR: 22020084  XER: 00000000
TASK = c0500480[0] 'swapper' THREAD: c053c000
GPR00: 00000001 c053dee0 c0500480 00000000 00000050 00000020 3fffffff 00000000
GPR08: 00000001 c0540000 e0080080 00000000 22000084 64183600 3ff8f800 00000000
GPR16: 841b0240 449a0303 00000000 00000000 00000000 00000000 00000000 c04f5bf4
GPR24: 00000000 00000000 00000000 00000050 00000020 00000000 3fffffff 00000050
NIP [c04db9dc] alloc_arch_preferred_bootmem+0x48/0x74
LR [c04db9ac] alloc_arch_preferred_bootmem+0x18/0x74
Call Trace:
[c053dee0] [c000a5a4] __of_address_to_resource+0x44/0xd0 (unreliable)
[c053def0] [c04dba58] ___alloc_bootmem_nopanic+0x50/0x108
[c053df20] [c04dbb28] ___alloc_bootmem+0x18/0x50
[c053df30] [c04d5de0] qe_ic_init+0x5c/0x1b0
[c053df70] [c04d77b0] mpc85xx_mds_pic_init+0xb8/0x10c
[c053dfb0] [c04cf374] init_IRQ+0x28/0x3c

p.s. commit 85355bb272 ("powerpc: Fix
mpic alloc warning") missed some alloc_bootmem() instances, this is
now fixed.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-08 13:50:25 +10:00
Michael Ellerman
33875f0330 powerpc/cell: Use pr_devel() in axon_msi.c
pr_debug() can now result in code being generated even when DEBUG
is not defined. That's not really desirable in some places.

With CONFIG_DYNAMIC_DEBUG=y:

size before:
   text    data     bss     dec     hex filename
   7083    1616       0    8699    21fb arch/powerpc/../axon_msi.o

size after:
   text    data     bss     dec     hex filename
   5772    1208       0    6980    1b44 arch/powerpc/../axon_msi.o

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-08 13:50:23 +10:00
Michael Ellerman
b69e9e931d powerpc/pseries: Use pr_devel() in xics.c
pr_debug() can now result in code being generated even when DEBUG
is not defined. That's not really desirable in some places.

With CONFIG_DYNAMIC_DEBUG=y:

size before:
   text    data     bss     dec     hex filename
   7720    5488     296   13504    34c0 platforms/pseries/xics.o

size after:
   text    data     bss     dec     hex filename
   7535	   5456	    296	  13287	   33e7	platforms/pseries/xics.o

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-08 13:50:21 +10:00
Joe Perches
d258e64ef5 powerpc: Remove unnecessary semicolons
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-08 13:50:21 +10:00
Michael Ellerman
551a232c87 powerpc/pseries: Use pr_devel() in pseries LPAR HPTE routines
pr_debug() can now result in code being generated even when DEBUG
is not defined. That's not really desirable in some places.

In particular, pSeries_lpar_hpte_insert() goes from 185 instructions
to 77 instructions as a result of this patch. Luckily that code
isn't called very often ...

With CONFIG_DYNAMIC_DEBUG=y:

size before:
   text    data     bss     dec     hex filename
   7284    1552     296    9132    23ac platforms/pseries/lpar.o

size after:
   text    data     bss     dec     hex filename
   5806    1096     296    7198    1c1e platforms/pseries/lpar.o

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-08 13:50:21 +10:00
Josh Boyer
a22ebd069d powerpc/44x: Fix build error with -Werror for Warp platform
With -Werror enabled during the build, the warp.c file fails to build
due to the temp_isr function not containing a return statement.  This
fixes the build error and documents that the function never returns.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-07-05 10:02:15 -04:00
Sean MacLennan
ba703e1a7a powerpc/4xx: Have Warp take advantage of GPIO LEDs default-state = keep
The GPIO LEDS driver now has a default state of "keep".  Update the Warp DTS
and platform file to take advantage of this new state.  This removes the
hardcoding of the two LEDs on the Warp.

Signed-off-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-07-06 08:56:01 -04:00
Tejun Heo
c43768cbb7 Merge branch 'master' into for-next
Pull linus#master to merge PER_CPU_DEF_ATTRIBUTES and alpha build fix
changes.  As alpha in percpu tree uses 'weak' attribute instead of
inline assembly, there's no need for __used attribute.

Conflicts:
	arch/alpha/include/asm/percpu.h
	arch/mn10300/kernel/vmlinux.lds.S
	include/linux/percpu-defs.h
2009-07-04 07:13:18 +09:00
Benjamin Herrenschmidt
fd0cca754f Merge commit 'kumar/next' into merge 2009-06-26 16:58:01 +10:00
Benjamin Herrenschmidt
6893ce6c1c powerpc/pasemi: Use raw spinlock in SMP TB sync
spin_lock() can hang if called while the timebase is frozen,
so use a raw lock instead, also disable interrupts while
at it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-26 16:55:34 +10:00
Benjamin Herrenschmidt
c4007a2fbf powerpc: Use one common impl. of RTAS timebase sync and use raw spinlock
Several platforms use their own copy of what is essentially the same code,
using RTAS to synchronize the timebases when bringing up new CPUs. This
moves it all into a single common implementation and additionally
turns the spinlock into a raw spinlock since the former can rely on
the timebase not being frozen when spinlock debugging is enabled, and finally
masks interrupts while the timebase is disabled.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-26 16:55:25 +10:00
Benjamin Herrenschmidt
7ccbe504b5 powerpc/pmac: Fix issues with PowerMac "PowerSurge" SMP
The old PowerSurge SMP (ie, dual or quad 604 machines) code has
numerous issues in modern world.

One is cpu_possible_map is set too late (the device-tree is bogus)
so we fail to allocate the interrupt stacks and crash. Another
problem is the fact the timebase is frozen by the bringup of the
second CPU so the delays in the generic code will hang, we need
to move some of the calling procedure to inside the powermac code.

This makes it boot again for me

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-26 14:37:24 +10:00
Sean MacLennan
3984114f05 powerpc/warp: Platform fix for i2c change
A change to the i2c subsystem breaks the warp platform code. The patch
is cleaner anyway, the old way was a bit crufty.

For those with keen eyes, the gratuitous change in the string from
PIKA to Warp is just so the logs look a bit nicer. The following two
lines tend to be printed one after another.

  Warp POST OK
  Warp DTM thread running.

Yeah, this will be the third patch to warp.c submitted in this
release....

Cheers,
   Sean

The i2c_client struct changed, breaking the code that looked for the ad7414
chip. Use the new of_find_i2c_device_by_node function added in 2.6.29.

Signed-off-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-26 14:37:23 +10:00
Tejun Heo
204fba4aa3 percpu: cleanup percpu array definitions
Currently, the following three different ways to define percpu arrays
are in use.

1. DEFINE_PER_CPU(elem_type[array_len], array_name);
2. DEFINE_PER_CPU(elem_type, array_name[array_len]);
3. DEFINE_PER_CPU(elem_type, array_name)[array_len];

Unify to #1 which correctly separates the roles of the two parameters
and thus allows more flexibility in the way percpu variables are
defined.

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: linux-mm@kvack.org
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: David S. Miller <davem@davemloft.net>
2009-06-24 15:13:45 +09:00
Huang Weiyi
6cc7959f38 powerpc/85xx: remove duplicated #include
Remove duplicated #include in arch/powerpc/platforms/85xx/xes_mpc85xx.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-23 08:09:59 -05:00
Kumar Gala
cb1ffb6204 powerpc/85xx: Fix issue found by lockdep trace in smp_85xx_kick_cpu
lockdep trace found the following:

------------[ cut here ]------------
Badness at c007baf0 [verbose debug info unavailable]
NIP: c007baf0 LR: c007bad8 CTR: 00000000
REGS: ef855e00 TRAP: 0700   Tainted: G        W
(2.6.30-06736-g12a31df-dirty)
MSR: 00021000 <ME,CE>  CR: 24044022  XER: 20000000
TASK = ef858000[1] 'swapper' THREAD: ef854000 CPU: 0
GPR00: 00000000 ef855eb0 ef858000 00000001 000000d0 f1000000 ffbc8000 ffffffff
GPR08: 000000d0 c0760000 c0710000 00000007 2fffffff 1004a388 7ffd9400 00000000
GPR16: 00000000 7ffcd100 7ffcd100 7ffcd100 c059cd78 c075c498 c057da7c ffffffff
GPR24: ffbc8000 f1000000 00000001 c00bf8b0 c07595d4 000000d0 00021000 000000d0
NIP [c007baf0] lockdep_trace_alloc+0xc0/0xf0
LR [c007bad8] lockdep_trace_alloc+0xa8/0xf0
Call Trace:
[ef855eb0] [c007ba60] lockdep_trace_alloc+0x30/0xf0 (unreliable)
[ef855ec0] [c00cb3ac] kmem_cache_alloc+0x2c/0xf0
[ef855ee0] [c00bf8b0] __get_vm_area_node+0x80/0x1c0
[ef855f10] [c0017580] __ioremap_caller+0x1d0/0x1e0
[ef855f40] [c057da7c] smp_85xx_kick_cpu+0x64/0x124
[ef855f60] [c0599180] __cpu_up+0xd0/0x1a4
[ef855f80] [c05997c4] cpu_up+0x14c/0x1e0
[ef855fc0] [c05732a0] kernel_init+0x100/0x1c4
[ef855ff0] [c0011524] kernel_thread+0x4c/0x68
Instruction dump:
8009c174 2f800000 409e0048 73c08000 40820040 4818980d 2f830000 419effa0
3d20c076 8009c388 2f800000 409eff90 <0fe00000> 4bffff88 60000000 60000000

We were calling ioremap after we local_irq_restore(flags).  A simple
reorder fixes the problem.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-23 08:09:57 -05:00
Randy Vinson
fa874618c3 powerpc/85xx: Fix FSL RapidIO probing on MDS boards
FSL RapidIO won't probe without a proper compatible entry. This
patch fixes the issue by adding fsl,rapidio-delta compatible to
mpc85xx_ids.

Signed-off-by: Randy Vinson <rvinson@mvista.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-23 08:09:56 -05:00
Kumar Gala
a44a23ed4d powerpc/85xx: Stop using ppc_md.init on socrates
Match what other 85xx platforms do for of_platform_bus_probe and use
machine_device_initcall.  This is one small step in killing of
ppc_md.init.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-23 08:09:55 -05:00
Linus Torvalds
59ef7a83f1 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (74 commits)
  PCI: make msi_free_irqs() to use msix_mask_irq() instead of open coded write
  PCI: Fix the NIU MSI-X problem in a better way
  PCI ASPM: remove get_root_port_link
  PCI ASPM: cleanup pcie_aspm_sanity_check
  PCI ASPM: remove has_switch field
  PCI ASPM: cleanup calc_Lx_latency
  PCI ASPM: cleanup pcie_aspm_get_cap_device
  PCI ASPM: cleanup clkpm checks
  PCI ASPM: cleanup __pcie_aspm_check_state_one
  PCI ASPM: cleanup initialization
  PCI ASPM: cleanup change input argument of aspm functions
  PCI ASPM: cleanup misc in struct pcie_link_state
  PCI ASPM: cleanup clkpm state in struct pcie_link_state
  PCI ASPM: cleanup latency field in struct pcie_link_state
  PCI ASPM: cleanup aspm state field in struct pcie_link_state
  PCI ASPM: fix typo in struct pcie_link_state
  PCI: drivers/pci/slot.c should depend on CONFIG_SYSFS
  PCI: remove redundant __msi_set_enable()
  PCI PM: consistently use type bool for wake enable variable
  x86/ACPI: Correct maximum allowed _CRS returned resources and warn if exceeded
  ...
2009-06-22 11:59:51 -07:00
Linus Torvalds
d06063cc22 Move FAULT_FLAG_xyz into handle_mm_fault() callers
This allows the callers to now pass down the full set of FAULT_FLAG_xyz
flags to handle_mm_fault().  All callers have been (mechanically)
converted to the new calling convention, there's almost certainly room
for architectures to clean up their code and then add FAULT_FLAG_RETRY
when that support is added.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-21 13:08:22 -07:00
Linus Torvalds
12e24f34cb Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (49 commits)
  perfcounter: Handle some IO return values
  perf_counter: Push perf_sample_data through the swcounter code
  perf_counter tools: Define and use our own u64, s64 etc. definitions
  perf_counter: Close race in perf_lock_task_context()
  perf_counter, x86: Improve interactions with fast-gup
  perf_counter: Simplify and fix task migration counting
  perf_counter tools: Add a data file header
  perf_counter: Update userspace callchain sampling uses
  perf_counter: Make callchain samples extensible
  perf report: Filter to parent set by default
  perf_counter tools: Handle lost events
  perf_counter: Add event overlow handling
  fs: Provide empty .set_page_dirty() aop for anon inodes
  perf_counter: tools: Makefile tweaks for 64-bit powerpc
  perf_counter: powerpc: Add processor back-end for MPC7450 family
  perf_counter: powerpc: Make powerpc perf_counter code safe for 32-bit kernels
  perf_counter: powerpc: Change how processor-specific back-ends get selected
  perf_counter: powerpc: Use unsigned long for register and constraint values
  perf_counter: powerpc: Enable use of software counters on 32-bit powerpc
  perf_counter tools: Add and use isprint()
  ...
2009-06-20 11:29:32 -07:00
Linus Torvalds
773d7a09e1 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (35 commits)
  powerpc/5121: make clock debug output more readable
  powerpc/5xxx: Add common mpc5xxx_get_bus_frequency() function
  powerpc/5200: Update pcm030.dts to add i2c eeprom and delete cruft
  powerpc/5200: convert mpc52xx_psc_spi to use cs_control callback
  fbdev/xilinxfb: Fix improper casting and tighen up probe path
  usb/ps3: Add missing annotations
  powerpc: Add memory clobber to mtspr()
  powerpc: Fix invalid construct in our CPU selection Kconfig
  ps3rom: Use ps3_system_bus_[gs]et_drvdata() instead of direct access
  powerpc: Add configurable -Werror for arch/powerpc
  of_serial: Add UPF_FIXED_TYPE flag
  drivers/hvc: Add missing __devexit_p()
  net/ps3: gelic - Add missing annotations
  powerpc: Introduce macro spin_event_timeout()
  powerpc/warp: Fix ISA_DMA_THRESHOLD default
  powerpc/bootwrapper: Custom build options for XPedite52xx targets
  powerpc/85xx: Add defconfig for X-ES MPC85xx boards
  powerpc/85xx: Add dts files for X-ES MPC85xx boards
  powerpc/85xx: Add platform support for X-ES MPC85xx boards
  83xx: add support for the kmeter1 board.
  ...
2009-06-19 17:40:40 -07:00
Anton Vorontsov
d2998c2c36 powerpc/86xx: add MMC SPI support for MPC8610HPCD boards
This patch adds spi and mmc-spi-slot nodes, plus a gpio-controller for
PIXIS' sdcsr bank that is used for managing SPI chip-select and for
reading card's states.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-19 16:46:04 -07:00
Harry Ciao
8f101a051e edac: cpc925 MC platform device setup
Fix up the number of cells for the values of CPC925 Memory Controller,
and setup related platform device during system booting up, against
which CPC925 Memory Controller EDAC driver would be matched.

Signed-off-by: Harry Ciao <qingtao.cao@windriver.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18 13:03:57 -07:00
Paul Mackerras
7325927e5a perf_counter: powerpc: Add processor back-end for MPC7450 family
This adds support for the performance monitor hardware on the
MPC7450 family of processors (7450, 7451, 7455, 7447/7457, 7447A,
7448), used in the later Apple G4 powermacs/powerbooks and other
machines.  These machines have 6 hardware counters with a unique
set of events which can be counted on each counter, with some
events being available on multiple counters.

Raw event codes for these processors are (PMC << 8) + PMCSEL.
If PMC is non-zero then the event is that selected by the given
PMCSEL value for that PMC (hardware counter).  If PMC is zero
then the event selected is one of the low-numbered ones that are
common to several PMCs.  In this case PMCSEL must be <= 22 and
the event is what that PMCSEL value would select on PMC1 (but
it may be placed any other PMC that has the same event for that
PMCSEL value).

For events that count cycles or occurrences that exceed a threshold,
the threshold requested can be specified in the 0x3f000 bits of the
raw event codes.  If the event uses the threshold multiplier bit
and that bit should be set, that is indicated with the 0x40000 bit
of the raw event code.

This fills in some of the generic cache events.  Unfortunately there
are quite a few blank spaces in the table, partly because these
processors tend to count cache hits rather than cache accesses.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linuxppc-dev@ozlabs.org
Cc: benh@kernel.crashing.org
LKML-Reference: <19000.55631.802122.696927@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-18 11:11:46 +02:00
Paul Mackerras
105988c015 perf_counter: powerpc: Enable use of software counters on 32-bit powerpc
This enables the perf_counter subsystem on 32-bit powerpc.  Since we
don't have any support for hardware counters on 32-bit powerpc yet,
only software counters can be used.

Besides selecting HAVE_PERF_COUNTERS for 32-bit powerpc as well as
64-bit, the main thing this does is add an implementation of
set_perf_counter_pending().  This needs to arrange for
perf_counter_do_pending() to be called when interrupts are enabled.
Rather than add code to local_irq_restore as 64-bit does, the 32-bit
set_perf_counter_pending() generates an interrupt by setting the
decrementer to 1 so that a decrementer interrupt will become pending
in 1 or 2 timebase ticks (if a decrementer interrupt isn't already
pending).  When interrupts are enabled, timer_interrupt() will be
called, and some new code in there calls perf_counter_do_pending().
We use a per-cpu array of flags to indicate whether we need to call
perf_counter_do_pending() or not.

This introduces a couple of new Kconfig symbols: PPC_HAVE_PMU_SUPPORT,
which is selected by processor families for which we have hardware PMU
support (currently only PPC64), and PPC_PERF_CTRS, which enables the
powerpc-specific perf_counter back-end.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linuxppc-dev@ozlabs.org
Cc: benh@kernel.crashing.org
LKML-Reference: <19000.55404.103840.393470@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-18 11:11:44 +02:00
Benjamin Herrenschmidt
b71a107c66 Merge commit 'gcl/merge' into next
Manual merge of:
	drivers/net/fec_mpc52xx.c
2009-06-18 11:22:08 +10:00
Benjamin Herrenschmidt
4b337c5f24 Merge commit 'origin/master' into next 2009-06-18 11:16:55 +10:00
Wolfram Sang
e7c5a4f292 powerpc/5121: make clock debug output more readable
This patch refactors clock.c by replacing printk calls with
pr_info/pr_cont, and uses '=' in output to connect key/value pairs

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-06-17 01:24:10 -06:00
Wolfgang Denk
87c441e54d powerpc/5xxx: Add common mpc5xxx_get_bus_frequency() function
So far, MPC512x used mpc512x_find_ips_freq() to get the bus frequency,
while MPC52xx used mpc52xx_find_ipb_freq().  Despite the different
clock names (IPS vs. IPB) the code was identical.

Use common code for both processor families.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-06-17 00:30:22 -06:00
Linus Torvalds
517d08699b Merge branch 'akpm'
* akpm: (182 commits)
  fbdev: bf54x-lq043fb: use kzalloc over kmalloc/memset
  fbdev: *bfin*: fix __dev{init,exit} markings
  fbdev: *bfin*: drop unnecessary calls to memset
  fbdev: bfin-t350mcqb-fb: drop unused local variables
  fbdev: blackfin has __raw I/O accessors, so use them in fb.h
  fbdev: s1d13xxxfb: add accelerated bitblt functions
  tcx: use standard fields for framebuffer physical address and length
  fbdev: add support for handoff from firmware to hw framebuffers
  intelfb: fix a bug when changing video timing
  fbdev: use framebuffer_release() for freeing fb_info structures
  radeon: P2G2CLK_ALWAYS_ONb tested twice, should 2nd be P2G2CLK_DAC_ALWAYS_ONb?
  s3c-fb: CPUFREQ frequency scaling support
  s3c-fb: fix resource releasing on error during probing
  carminefb: fix possible access beyond end of carmine_modedb[]
  acornfb: remove fb_mmap function
  mb862xxfb: use CONFIG_OF instead of CONFIG_PPC_OF
  mb862xxfb: restrict compliation of platform driver to PPC
  Samsung SoC Framebuffer driver: add Alpha Channel support
  atmel-lcdc: fix pixclock upper bound detection
  offb: use framebuffer_alloc() to allocate fb_info struct
  ...

Manually fix up conflicts due to kmemcheck in mm/slab.c
2009-06-16 19:50:13 -07:00
Geert Uytterhoeven
ae52bb2384 fbdev: move logo externs to header file
Now we have __initconst, we can finally move the external declarations for
the various Linux logo structures to <linux/linux_logo.h>.

James' ack dates back to the previous submission (way to long ago), when the
logos were still __initdata, which caused failures on some platforms with some
toolchain versions.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Acked-by: James Simmons <jsimmons@infradead.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:57 -07:00
Mel Gorman
6484eb3e2a page allocator: do not check NUMA node ID when the caller knows the node is valid
Callers of alloc_pages_node() can optionally specify -1 as a node to mean
"allocate from the current node".  However, a number of the callers in
fast paths know for a fact their node is valid.  To avoid a comparison and
branch, this patch adds alloc_pages_exact_node() that only checks the nid
with VM_BUG_ON().  Callers that know their node is valid are then
converted.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Paul Mundt <lethal@linux-sh.org>	[for the SLOB NUMA bits]
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:32 -07:00
Benjamin Herrenschmidt
492b057c42 Merge commit 'origin/master' into next 2009-06-17 10:24:53 +10:00
Zhang, Yanmin
70298c6e6c PCI AER: support Multiple Error Received and no error source id
Based on PCI Express AER specs, a root port might receive multiple
TLP errors while it could only save a correctable error source id
and an uncorrectable error source id at the same time. In addition,
some root port hardware might be unable to provide a correct source
id, i.e., the source id, or the bus id part of the source id provided
by root port might be equal to 0.

The patchset implements the support in kernel by searching the device
tree under the root port.

Patch 1 changes parameter cb of function pci_walk_bus to return a value.
When cb return non-zero, pci_walk_bus stops more searching on the
device tree.

Reviewed-by: Andrew Patterson <andrew.patterson@hp.com>
Signed-off-by: Zhang Yanmin <yanmin_zhang@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-16 14:30:13 -07:00
Linus Torvalds
609106b9ac Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (38 commits)
  ps3flash: Always read chunks of 256 KiB, and cache them
  ps3flash: Cache the last accessed FLASH chunk
  ps3: Replace direct file operations by callback
  ps3: Switch ps3_os_area_[gs]et_rtc_diff to EXPORT_SYMBOL_GPL()
  ps3: Correct debug message in dma_ioc0_map_pages()
  drivers/ps3: Add missing annotations
  ps3fb: Use ps3_system_bus_[gs]et_drvdata() instead of direct access
  ps3flash: Use ps3_system_bus_[gs]et_drvdata() instead of direct access
  ps3: shorten ps3_system_bus_[gs]et_driver_data to ps3_system_bus_[gs]et_drvdata
  ps3: Use dev_[gs]et_drvdata() instead of direct access for system bus devices
  block/ps3: remove driver_data direct access of struct device
  ps3vram: Make ps3vram_priv.reports a void *
  ps3vram: Remove no longer used ps3vram_priv.ddr_base
  ps3vram: Replace mutex by spinlock + bio_list
  block: Add bio_list_peek()
  powerpc: Use generic atomic64_t implementation on 32-bit processors
  lib: Provide generic atomic64_t implementation
  powerpc: Add compiler memory barrier to mtmsr macro
  powerpc/iseries: Mark signal_vsp_instruction() as maybe unused
  powerpc/iseries: Fix unused function warning in iSeries DT code
  ...
2009-06-16 11:30:37 -07:00
Benjamin Herrenschmidt
48c931125b powerpc: Fix invalid construct in our CPU selection Kconfig
commit 5b7c3c918c introduced an invalid
construct in our CPU selection. This caused warnings, though it still
appeared to do the right thing.

This fixes it properly by having separate formal definitions of
PPC_BOOK3S_32 and PPC_BOOK3S_64 and one statement defining
PPC_BOOK3S based on the two above.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-16 14:15:46 +10:00
Michael Ellerman
ba55bd7436 powerpc: Add configurable -Werror for arch/powerpc
Add the option to build the code under arch/powerpc with -Werror.

The intention is to make it harder for people to inadvertantly introduce
warnings in the arch/powerpc code. It needs to be configurable so that
if a warning is introduced, people can easily work around it while it's
being fixed.

The option is a negative, ie. don't enable -Werror, so that it will be
turned on for allyes and allmodconfig builds.

The default is n, in the hope that developers will build with -Werror,
that will probably lead to some build breaks, I am prepared to be flamed.

It's not enabled for math-emu, which is a steaming pile of warnings.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-16 14:15:45 +10:00
Sean MacLennan
79290e4b69 powerpc/warp: Fix ISA_DMA_THRESHOLD default
If no device is passed to __dma_alloc_coherent, it defaults to using ISA_DMA_THRESHOLD
for the mask. This patch provides a reasonable default rather than 0.

Signed-off-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-16 14:15:44 +10:00
Nate Case
3038acf909 powerpc/85xx: Add platform support for X-ES MPC85xx boards
Add support for X-ES single-board computers based on the Freescale
MPC85xx processors.

Signed-off-by: Nate Case <ncase@xes-inc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15 22:15:13 -05:00
Heiko Schocher
8159df72d4 83xx: add support for the kmeter1 board.
The following series implements basic board support for
the kmeter1 board from keymile, based on a MPC8360.

This series provides the following functionality:

- The board can boot with a serial console on UART1
- Ethernet:
    UCC1 in RGMII mode
    UCC2 in RGMII mode
    UCC4 in RMII mode
    UCC5 in RMII mode
    UCC6 in RMII mode
    UCC7 in RMII mode
    UCC8 in RMII mode

    following patch is necessary for working UCC in RMII mode:

    http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/070804.html

- Flash accessed via MTD layer

  On this hardware there is an Intel P30 flash, following patch
  series is necessary for working with this hardware:

  http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/070624.html

- I2C using I2C Bus 1 from the MPC8360 cpu

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15 22:15:09 -05:00
Peter Korsgaard
b7d66c88c9 powerpc/mpc83xx: Fix usb mux setup for mpc834x
usb0 and usb1 mux settings in the sicrl register were swapped (twice!)
in mpc834x_usb_cfg(), leading to various strange issues with fsl-ehci
and full speed devices.

The USB port config on mpc834x is done using 2 muxes: Port 0 is always
used for MPH port 0, and port 1 can either be used for MPH port 1 or DR
(unless DR uses UTMI phy or OTG, then it uses both ports) - See 8349 RM
figure 1-4..

mpc8349_usb_cfg() had this inverted for the DR, and it also had the bit
positions of the usb0 / usb1 mux settings swapped. It would basically
work if you specified port1 instead of port0 for the MPH controller (and
happened to use ULPI phys), which is what all the 834x dts have done,
even though that configuration is physically invalid.

Instead fix mpc8349_usb_cfg() and adjust the dts files to match reality.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15 21:45:31 -05:00
Kumar Gala
152d018282 powerpc/85xx: Add SWIOTLB support to FSL boards
Add the platform-specific code for enabling SWIOTLB if needed on P2020DS,
MPC85xx DS, and MPC85xx MDS boards as they are capable of having >4G of
memory.

We determine if we need to enable swiotlb based on how much memory is in
the board and if it exceeds 4G or what we can map via PCI inbound
windows.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15 21:45:29 -05:00
Becky Bruce
5cef379b34 powerpc: Add 86xx support for SWIOTLB
This is the final bit of code to allow enabling swiotlb on
mpc86xx.  The platform-specific code is very small and consists
of enabling SWIOTLB in the config file, registering the
swiotlb_setup_bus_notifier initcall, and setting pci_dma_ops
to point to swiotlb_pci_dma_ops if we have more memory than
can be mapped by the inbound PCI windows.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15 21:45:29 -05:00
Linus Torvalds
2ed0e21b30 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1244 commits)
  pkt_sched: Rename PSCHED_US2NS and PSCHED_NS2US
  ipv4: Fix fib_trie rebalancing
  Bluetooth: Fix issue with uninitialized nsh.type in DTL-1 driver
  Bluetooth: Fix Kconfig issue with RFKILL integration
  PIM-SM: namespace changes
  ipv4: update ARPD help text
  net: use a deferred timer in rt_check_expire
  ieee802154: fix kconfig bool/tristate muckup
  bonding: initialization rework
  bonding: use is_zero_ether_addr
  bonding: network device names are case sensative
  bonding: elminate bad refcount code
  bonding: fix style issues
  bonding: fix destructor
  bonding: remove bonding read/write semaphore
  bonding: initialize before registration
  bonding: bond_create always called with default parameters
  x_tables: Convert printk to pr_err
  netfilter: conntrack: optional reliable conntrack event delivery
  list_nulls: add hlist_nulls_add_head and hlist_nulls_del
  ...
2009-06-15 09:40:05 -07:00
David S. Miller
9cbc1cb8cd Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:
	Documentation/feature-removal-schedule.txt
	drivers/scsi/fcoe/fcoe.c
	net/core/drop_monitor.c
	net/core/net-traces.c
2009-06-15 03:02:23 -07:00
Geert Uytterhoeven
a4e623fbc9 ps3: Replace direct file operations by callback
Currently the FLASH database is updated by the kernel using file operations,
meant for userspace only. While this works for us because copy_{from,to}_user()
on powerpc can handle kernel pointers, this is unportable and a bad example.
Replace the file operations by callbacks, registered by the ps3flash driver.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-15 16:47:26 +10:00
Geert Uytterhoeven
47cb996b05 ps3: Switch ps3_os_area_[gs]et_rtc_diff to EXPORT_SYMBOL_GPL()
They were never intended to be exported using EXPORT_SYMBOL() anyway

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-15 16:47:26 +10:00
Geert Uytterhoeven
7e28060a5e ps3: Correct debug message in dma_ioc0_map_pages()
It reports the failure of a call to lv1_put_iopte(), not
lv1_map_device_dma_region().

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-15 16:47:26 +10:00
Michael Ellerman
e8d1673b97 powerpc/iseries: Mark signal_vsp_instruction() as maybe unused
signal_vsp_instruction() is currently only used if CONFIG_PROC_FS
is enabled. However logically it has nothing to do with PROC_FS,
so rather than making it depend on that mark it as maybe unused.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-15 13:27:37 +10:00
Michael Ellerman
27167c7e9b powerpc/iseries: Fix unused function warning in iSeries DT code
If CONFIG_BLK_DEV_INITRD is unset dt_prop_u64() is unused, which
causes a warning. We don't really want to tie the definition to
BLK_DEV_INITRD, so mark it as maybe unused.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-15 13:27:37 +10:00
Michael Ellerman
86c276560a powerpc/cell: Use driver_data acessors, not platform_data in Axon MSI
The Axon MSI driver incorrectly uses platform_data, rather than
the proper accessors for driver_data.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-15 13:26:22 +10:00
Geert Uytterhoeven
d3352c9f1e ps3fb/vram: Extract common GPU stuff into <asm/ps3gpu.h>
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: linux-fbdev-devel@lists.sourceforge.net
Cc: Jim Paris <jim@jtan.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-15 13:26:20 +10:00
Geert Uytterhoeven
5c6fc8db76 powerpc/cell: Extract duplicated IOPTE_* to <asm/iommu.h>
Both arch/powerpc/platforms/cell/iommu.c and arch/powerpc/platforms/ps3/mm.c
contain the same Cell IOMMU page table entry definitions. Extract them and move
them to <asm/iommu.h>, while adding a CBE_ prefix.
This also allows them to be used by drivers.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-15 13:26:19 +10:00
Benjamin Herrenschmidt
bc47ab0241 Merge commit 'origin/master' into next
Manual merge of:
	arch/powerpc/kernel/asm-offsets.c
2009-06-12 16:53:38 +10:00
Benjamin Herrenschmidt
10f52dd9fe Merge commit 'jwb/next' into next 2009-06-12 10:35:52 +10:00
Ingo Molnar
940010c5a3 Merge branch 'linus' into perfcounters/core
Conflicts:
	arch/x86/kernel/irqinit.c
	arch/x86/kernel/irqinit_64.c
	arch/x86/kernel/traps.c
	arch/x86/mm/fault.c
	include/linux/sched.h
	kernel/exit.c
2009-06-11 17:55:42 +02:00
Stephen Rothwell
1babddbc2e powerpc/spufs: Remove unused error path
Commit 45db924089 ("powerpc/spufs: Remove
double check for non-negative dentry") removed the only user of the
out_dput label, so remove it and the code following it.

Gets rid of this warning:

arch/powerpc/platforms/cell/spufs/inode.c: In function 'spufs_create':
arch/powerpc/platforms/cell/spufs/inode.c:647: warning: label 'out_dput' defined but not used

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-09 16:47:41 +10:00
Stephen Rothwell
41febbc829 powerpc/pseries: Fix warnings when printing resource_size_t
resource_size_t is 64 bits on pseries

Gets rid of these warnings:

arch/powerpc/platforms/pseries/iommu.c: In function 'pci_dma_bus_setup_pSeries':
arch/powerpc/platforms/pseries/iommu.c:391: warning: format '%lx' expects type 'long unsigned int', but argument 2 has type 'resource_size_t'
arch/powerpc/platforms/pseries/iommu.c:417: warning: format '%lx' expects type 'long unsigned int', but argument 2 has type 'resource_size_t'

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-09 16:47:39 +10:00
Benjamin Herrenschmidt
5b7c3c918c powerpc: Introduce CONFIG_PPC_BOOK3S
This patch introduce a new Kconfig option, CONFIG_PPC_BOOK3S
that represents processors that are compliant with the "classic"
(aka "server") variant of the PowerPC architecture.

It replaces CONFIG_6xx on 32-bit (though the symbol is still
defined for compatibility) and encompass all currently supported
64-bit processors.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-09 16:47:22 +10:00
Roderick Colenbrander
e52ba9c541 powerpc/virtex: Add Xilinx ML510 reference design support
Signed-off-by: Roderick Colenbrander <thunderbird2k@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-06-06 10:15:24 -06:00
Roderick Colenbrander
64f1650247 powerpc/virtex: Add support for Xilinx PCI host bridge
This patch adds support for the Xilinx plbv46-pci-1.03.a PCI host
bridge IPcore.

Signed-off-by: Roderick Colenbrander <thunderbird2k@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-06-06 10:14:22 -06:00
Josh Boyer
336ff73542 powerpc/40x: Convert AMCC Kilauea/Halekala boards to ppc40x_simple
This cleans up the kilauea/halekala board ports to use the ppc40x_simple
platform support.

Tested-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-06-04 09:02:21 -04:00
Josh Boyer
194ff1c387 powerpc/40x: Convert AMCC Makalu board to ppc40x_simple
This cleans up the makalu board port to use the ppc40x_simple platform
support.

Tested-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-06-04 09:02:09 -04:00
Anton Blanchard
f8729e8531 powerpc: Convert RTAS event scan from kernel thread to workqueue
RTAS event scan has to run across all cpus. Right now we use a kernel
thread and set_cpus_allowed but in doing so we wake up the previous cpu
unnecessarily.

Some ftrace output shows this:

previous cpu (2):
[002]  7.022331: sched_switch: task swapper:0 [140] ==> rtasd:194 [120]
[002]  7.022338: sched_switch: task rtasd:194 [120] ==> migration/2:9 [0]
[002]  7.022344: sched_switch: task migration/2:9 [0] ==> swapper:0 [140]

next cpu (3):
[003]  7.022345: sched_switch: task swapper:0 [140] ==> rtasd:194 [120]
[003]  7.022371: sched_switch: task rtasd:194 [120] ==> swapper:0 [140]

We can use schedule_delayed_work_on and avoid the unnecessary wakeup.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-02 10:35:32 +10:00
Michael Neuling
2d8ae638bb powerpc: Make the NR_CPUS max 8192
We can compile and boot with NR_CPUS=8192, so make this the max.  1024
was an arbitrary decision anyway.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-02 10:32:24 +10:00
Ingo Molnar
3d58f48ba0 Merge branch 'linus' into irq/numa
Conflicts:
	arch/mips/sibyte/bcm1480/irq.c
	arch/mips/sibyte/sb1250/irq.c

Merge reason: we gathered a few conflicts plus update to latest upstream fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-01 21:06:21 +02:00
Ingo Molnar
23db9f430b Merge branch 'linus' into perfcounters/core
Merge reason: merge almost-rc8 into perfcounters/core, which was -rc6
              based - to pick up the latest upstream fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-01 10:01:39 +02:00
Benjamin Herrenschmidt
435462c6e6 Merge branch 'merge' into next 2009-05-29 13:54:52 +10:00
Michael Ellerman
6eb0ac0389 powerpc/maple: Add a quirk to disable MSI for IPR on Bimini
Something in the HW or FW setup is busted and MSIs aren't working with
IPR on Bimini, so until we figure out exaxtly what's up, we quirk them
out

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-22 16:01:11 +10:00
Kumar Gala
d7b41b1fdf powerpc/pci: clean up direct access to sysdata by iseries platform
We shouldn't directly access sysdata to get the device node.  We should
be calling pci_device_to_OF_node().

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:26 +10:00
Jan Blunck
45db924089 powerpc/spufs: Remove double check for non-negative dentry
This patch removes an unnecessary double check if the dentry returned by
lookup_create() is actually non-negative. Since lookup_create() itself returns
an error in this case just remove the check.

Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:25 +10:00
Kumar Gala
2eb4afb69f powerpc/pci: Move pseries code into pseries platform specific area
There doesn't appear to be any specific reason that we need to setup the
pseries specific notifier in generic arch pci code.  Move it into pseries
land.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:24 +10:00
Kumar Gala
58513dc40d powerpc/pci: Clean up direct access to sysdata by celleb platforms
We shouldn't directly access sysdata to get the device node to just
go get the pci_controller.  We can call pci_bus_to_host() for this
purpose.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:24 +10:00
Kumar Gala
95272262aa powerpc/pci: Clean up direct access to sysdata by powermac platforms
We shouldn't directly access sysdata to get the device node but call
pci_bus_to_OF_node() for this purpose.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:23 +10:00
Kumar Gala
8456993ead powerpc/pci: Clean up direct access to sysdata by CHRP platforms
We shouldn't directly access sysdata to get the pci_controller.  Instead
use pci_bus_to_host() for this purpose.  In the future we might have
sysdata be a device_node to match ppc64 and unify the code between ppc32
& ppc64.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:23 +10:00
Kumar Gala
5b21fb8e76 powerpc/pci: Clean up direct access to sysdata by 52xx platforms
We shouldn't directly access sysdata to get the pci_controller.  Instead
use pci_bus_to_host() for this purpose.  In the future we might have
sysdata be a device_node to match ppc64 and unify the code between ppc32
& ppc64.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:22 +10:00
Michael Ellerman
f11f76d4b8 powerpc/powermac: Use generic_handle_irq() in gatwick_action()
Don't call __do_IRQ() directly in gatwick_action(), use
generic_handle_irq().

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:20 +10:00
Geoff Levand
fb94fc2b89 powerpc/ps3: Use smp_request_message_ipi
ps3 has 4 ipis per cpu and can use the new smp_request_message_ipi to
reduce path length when receiving an ipi.

This has the side effect of setting IRQF_PERCPU.

Signed-off-by: Milton Miller <miltonm@bga.com>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:43:58 +10:00
Robert Jennings
14f966e794 powerpc/pseries: CMO unused page hinting
Adds support for the "unused" page hint which can be used in shared
memory partitions to flag pages not in use, which will then be stolen
before active pages by the hypervisor when memory needs to be moved to
LPARs in need of additional memory.  Failure to mark pages as 'unused'
makes the LPAR slower to give up unused memory to other partitions.

This adds the kernel parameter 'cmo_free_hint' to disable this
functionality.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:43:58 +10:00
Sean MacLennan
805e324b7f powerpc: Update Warp to use leds-gpio driver
Now that leds-gpio is a proper OF platform driver, the Warp can use
the leds-gpio driver rather than the old out-of-kernel driver.

One side-effect is the leds-gpio driver always turns the leds off
while the old driver left them alone. So we have to set them back to
the correct settings.

Signed-off-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:42:56 +10:00
Kumar Gala
01af9507ff powerpc/85xx: Add P2020DS board support
The P2020 is a dual e500v2 core based SOC with:
* 3 PCIe controllers
* 2 General purpose DMA controllers
* 2 sRIO controllers
* 3 eTSECS
* USB 2.0
* SDHC
* SPI, I2C, DUART
* enhanced localbus
* and optional Security (P2020E) security w/XOR acceleration

The p2020 DS reference board is pretty similar to the existing MPC85xx
DS boards and has a ULI 1575 connected on one of the PCIe controllers.

Signed-off-by: Ted Peters <Ted.Peters@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:43 -05:00
Anton Vorontsov
5e8306fe5d powerpc/85xx: Enable Serial RapidIO for MPC85xx MDS boards
Select HAS_RAPIDIO symbol and add rio nodes for MPC8568E-MDS
and MPC8569E-MDS boards.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:34 -05:00
Haiying Wang
4b3b42b38a powerpc/85xx: Add MPC8569MDS board support
The MPC8569 is similiar to the MPC8568.  It doubles the number of
QUICC Engine RISC cores from 2 to 4.  Removes eTSECs, TLU and adds
the eSDHC controller.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:26 -05:00
Haiying Wang
ea5130dcb4 powerpc/85xx: clean up for mpc8568_mds name
Keep an unique machine def for the MPC8568 MDS board to handle some
subtle differences between the future MDS board. Also set the bcsrs in
setup_arch() only for mpc8568_mds because other mds has different bcsr
settings.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:21 -05:00
Kumar Gala
1e76dff22c powerpc/86xx: clean up smp init code
Removed the need for asm/mpc86xx.h as it was only used in mpc86xx_smp.c
and just moved the defines it cared about into there.  Also fixed up
the ioremap to only map the one 4k page we need access to and to iounmap
when we are done.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:50:20 -05:00
Kumar Gala
ca851c783c powerpc/cpm: Remove some cruft code and defines
Kill of some old defines and macros that we no longer use like
CPM_MAP_ADDR and CPM_IRQ_OFFSET.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:47:19 -05:00
Kumar Gala
9bf8b2741e powerpc: Refactor board check for PCI quirks on FSL boards with uli1575
Refactor the check to determine if the quirk is applicable to the boards
into one inline function so we only have to change one place to add more
boards that the quirks might be applicable to.

Also removed a warning related to unused temp variable.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-05-19 00:46:15 -05:00
David S. Miller
bb803cfbec Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/scsi/fcoe/fcoe.c
2009-05-18 21:08:20 -07:00
Ingo Molnar
dc3f81b129 Merge commit 'v2.6.30-rc6' into perfcounters/core
Merge reason: this branch was on an -rc4 base, merge it up to -rc6
              to get the latest upstream fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-18 07:37:49 +02:00
Linus Torvalds
c653849981 Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  Revert "mm: add /proc controls for pdflush threads"
  viocd: needs to depend on BLOCK
  block: fix the bio_vec array index out-of-bounds test
2009-05-15 08:05:37 -07:00
Gerhard Stenzel
37cd8ed90f powerpc/cell: Make ptcal more reliable
There have been a series of checkstops on QS21 related to
ptcal being set up incorrectly. On systems that only
have memory on a single node, ptcal fails when it gets
a pointer to memory on the remote node.

Moreover, agressive prefetching in memcpy and other
functions may accidentally touch the first cache line
of the page that we reserve for ptcal, which causes
an ECC checkstop.

We now allocate pages only from the specified node, moves the
ptcal area into the middle of the allocated page to avoid
potential prefetch problems and prints the address of the
ptcal area to facilitate diagnostics.

Signed-off-by: Gerhard Stenzel <gerhard.stenzel@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15 16:43:42 +10:00
Stephen Rothwell x
397717c578 powerpc/iseries: Fix pci breakage due to bad dma_data initialization
Commit 4fc665b88a "powerpc: Merge 32 and
64-bit dma code" made changes to the PCI initialisation code that added
an assignment to archdata.dma_data but only for 32 bit code.  Commit
7eef440a54 "powerpc/pci: Cosmetic cleanups
of pci-common.c" removed the conditional compilation.  Unfortunately,
the iSeries code setup the archdata.dma_data before that assignment was
done - effectively overwriting the dma_data with NULL.

Fix this up by moving the iSeries setup of dma_data into a
pci_dma_dev_setup callback.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15 16:43:41 +10:00
Grant Likely
514a30d95f powerpc/virtex: Add uImage to the default images list
It is common to use U-Boot on Xilinx Virtex platforms.  This patch
ensures that CONFIG_DEFAULT_UIMAGE is selected for virtex

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-05-14 10:23:10 -06:00
Alexander Beregalov
05dc7b6134 viocd: needs to depend on BLOCK
Fix this build error when CONFIG_BLOCK is not set:
drivers/cdrom/viocd.c: In function 'viocd_blk_open':
drivers/cdrom/viocd.c:156: error: dereferencing pointer to incomplete type
drivers/cdrom/viocd.c: In function 'viocd_blk_release':
drivers/cdrom/viocd.c:162: error: dereferencing pointer to incomplete type
drivers/cdrom/viocd.c: In function 'viocd_blk_ioctl':
drivers/cdrom/viocd.c:170: error: dereferencing pointer to incomplete type
drivers/cdrom/viocd.c: In function 'viocd_blk_media_changed':
drivers/cdrom/viocd.c:176: error: dereferencing pointer to incomplete type
...

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-12 13:28:23 +02:00
Ingo Molnar
6cda3eb62e Merge branch 'x86/apic' into irq/numa
Merge reason: both topics modify the APIC code but were able to do it in
              parallel so far. An upcoming patch generates a conflict so
              merge them to avoid the conflict.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-12 12:17:36 +02:00