forked from Minki/linux
99d20cf520
13763 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Franklin S Cooper Jr
|
99d20cf520 |
ARM: dts: k2g-evm: Add unit address to memory node
With the new Keystone 2 Industrial Communication EVM adding the unit address to the memory node it made sense to add it for this board also. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> |
||
|
Franklin S Cooper Jr
|
f402573fc0 |
ARM: dts: keystone-k2g: Remove skeleton.dtsi
Adding the unit address to the memory node was causing the below error: Warning (reg_format): "reg" property in /memory has invalid length (8 bytes) (#address-cells == 2, #size-cells == 2) Further debugging showed that this was due to the memory node added by default to skeleton.dtsi which was being included in keystone-k2g.dtsi. Adding a missing node was all that was needed to remove this deprecated dtsi file from the SoC dtsi. With skeleton.dtsi removed the dtc compiler no longer complained about including the unit address for the memory node. Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> |
||
Olof Johansson
|
ec16187a63 |
Fixes for omaps for v4.12-rc cycle most consisting of few minor dts fixes
for various devices. Also included is a memory controller (GPMC) debug output fix as without that the shown bootloader configured GPMC bus width will be wrong and won't work for kernel timings: - Add dra7 powerhold configuration to be able to shut down pmic correctly - Fix polarity for gta04 mcbsp4 clocks for modem - Fix Pandaboard CEC pin pull making it usable - Fix LogicPD Torpedo camera pin mux - Fix GPMC debug bus width - Reduce cpu thermal shutdown temperature -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlkdw8ARHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXOERBAA0y2DvjgvpYL+AefHlaoeN8OW6PL/GB29 sCZglf3Tc7pdmqJQXFbj1UqqPHCw3tnSAbfYwcOdiFr8g2ni0A9s9HjKoIZQzphw s+llq282YdTi+pWxjQ79OvkxhTJZnKX0G8Ls31klmHT/4/vIGsiTuYodum3FN0n2 /uFGDGBljjMGyE69klJ6LD13VXcXSe0ESK5iIV/naVMbdzLFUW9kAxMz6IL3TO48 gP/wOpJmksq3l+vFUc/XOrNX3rIFoS/coegYUM5lkFNHtIiooIbvWrTnc6Ub/0oV XXEoijIUSralcouYyMLdTco+ag/qBtd4xpHdEYGFg04HQrvI7iEF6OAW2MAgjW5z D9X5CMqkPaMRf6X2/LaVQ6sqrcw2t75lW6sRX/y9N2fH4WtchYyhpMVhw+OH241x LNLmV7HaNkE0AaWSjHtYUA1HFhMUWHqQAPqy5GWfxoJvzx7HofG1txiLRF9rUzBt OZ30uWUpVi3koJBVG12Rz+UhN90H4/qK+kwDcQOOEDNd1kQcT/QNFew3fGBNqkDL PivoXWAJnbEJQ6Xr+ablemE7hyyBHHJxDAQsOLh4VitxEPw1TYh4/widUi52/0VQ PMUdbIBhQJp6St7TtUWW8CckdzbjsAMk0zJgcZeBXmczfTjH8PMOuxLvATUweEf+ JD+zCBBfXFU= =My0U -----END PGP SIGNATURE----- Merge tag 'omap-for-v4.12/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omaps for v4.12-rc cycle most consisting of few minor dts fixes for various devices. Also included is a memory controller (GPMC) debug output fix as without that the shown bootloader configured GPMC bus width will be wrong and won't work for kernel timings: - Add dra7 powerhold configuration to be able to shut down pmic correctly - Fix polarity for gta04 mcbsp4 clocks for modem - Fix Pandaboard CEC pin pull making it usable - Fix LogicPD Torpedo camera pin mux - Fix GPMC debug bus width - Reduce cpu thermal shutdown temperature * tag 'omap-for-v4.12/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: dra7: Reduce cpu thermal shutdown temperature memory: omap-gpmc: Fix debug output for access width ARM: dts: LogicPD Torpedo: Fix camera pin mux ARM: dts: omap4: enable CEC pin for Pandaboard A4 and ES ARM: dts: gta04: fix polarity of clocks for mcbsp4 ARM: dts: dra7: Add power hold and power controller properties to palmas Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
6a3538c174 |
i.MX fixes for 4.12:
- A fix on GPCv2 power domain driver Kconfig which causes a build
failure when CONFIG_PM is not set.
- Pull down PMIC IRQ pin for imx53-qsrb board to prevent spurious
PMIC interrupts from happening.
- Remove board level OPP override for imx6sx-sdb to fix a boot crash
seen on Rev.C boards.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZHav8AAoJEFBXWFqHsHzOPWMH/RP4LuJDUoFaPUJ3WsrMhPYR
qmBEzZXvjKBxImFCIiG09vcjQIiN9p5uZ9AqNIQGgoW20DlFKVZ0Rd64MJzp8QnL
J/WwEDTG1qs2jCkNWYkFEUwz6fMWzzTUydj665dkQI3SNwRAJ9dE0LgybM6Yws3C
FQdIUyWR2z8QQYqjLTD9XuDe7ewyoslvFssWRiVzpcnkiu8sWgbTuJ/K+ISCgwo4
rC6Vi7Z4WU47SgL7+d9sOMzDPDIif5mOdfW8uG3tgCeDp/8WNz9IbamCuxhggQpa
+k9jaTHAtOV9ypf1PBUCGHazU7E8hc42XoW6XT0yY3sFynw+VPd1IFVXiWAEBu0=
=gQA8
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
i.MX fixes for 4.12:
- A fix on GPCv2 power domain driver Kconfig which causes a build
failure when CONFIG_PM is not set.
- Pull down PMIC IRQ pin for imx53-qsrb board to prevent spurious
PMIC interrupts from happening.
- Remove board level OPP override for imx6sx-sdb to fix a boot crash
seen on Rev.C boards.
* tag 'imx-fixes-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: add PM dependency for IMX7_PM_DOMAINS
ARM: dts: imx6sx-sdb: Remove OPP override
ARM: dts: imx53-qsrb: Pulldown PMIC IRQ pin
Signed-off-by: Olof Johansson <olof@lixom.net>
|
||
|
Olof Johansson
|
5cb1ac0f79 |
This pull request contains Broadcom ARM-based SoC Device Tree fixes for
4.12, please pull the following: - Baruch provides several fixes for the Raspberry Pi (BCM2835) Device Tree source include file: uart0 pinctrl node names, pin number for i2c0, uart0 rts/cts pins and invalid uart1 pin, missing numbers for ethernet aliases -----BEGIN PGP SIGNATURE----- iQIcBAABCAAGBQJZF8+xAAoJEIfQlpxEBwcERmUP/iAf5euX/RPb3eJ8QmDhn2ap bnU4Puh5aT16fwqK/fohpzqcxhlkqsPhIvl6gwi6UHzNbZOqhz2gwXBjP7DuDsPx rNF7qJE0zFCy/jmhiSbMWiC62Q7UbIR+TmtP3cFzXw8edM6Tjp+IFkE8fuSmQkdd /djp+3k16KNRsSu+iyNDJSu4jNjigKP1DYPFJi0cMceQZ2Hr6KHO7r2mHXmZ8Cf7 cxIPw38ZRiwIU6gbyPrVSLjJJ1X3O3QAyqlTbeooJn5bZ6cEc7jt2LlUUoLY2JTQ +2HoT2DsrDX8SfkJmyBr41/awsHq2wx+++zss3qd9LHKqRyKBZgY6HVea05+z1T9 +FtWZ74zmOzHrjqwB5a3fN4+EfY4HKqSDVnrgbNu9Y59LCZPeVSLcFK1rpuLnu62 ZaeTTOmwhwzetOGi96+2LhnMihFbGoB5te+y8nZtf9vAONp6nLsDgQ30gqGC6/19 JeR+5z+z++7TpsghLJ+YlE4HjxMRV5zFYTLmHHI76DJOCb8i48wMURDizPHZYuaq +aRiBJkmweZtu1KJea867UIDblgk2K9QosL35lomrD518VeTIgSrmBrux7fwlMC/ r8Z0B3z632gNYi+ZrR/Fr+9lmHpq7NBqEai5BAwI1DkwW3HfdeSAczZ5Tij42eGA U2qLiZSH7U/8cb6mCp0H =6jUO -----END PGP SIGNATURE----- Merge tag 'arm-soc/for-4.12/devicetree-fixes' of http://github.com/Broadcom/stblinux into fixes This pull request contains Broadcom ARM-based SoC Device Tree fixes for 4.12, please pull the following: - Baruch provides several fixes for the Raspberry Pi (BCM2835) Device Tree source include file: uart0 pinctrl node names, pin number for i2c0, uart0 rts/cts pins and invalid uart1 pin, missing numbers for ethernet aliases * tag 'arm-soc/for-4.12/devicetree-fixes' of http://github.com/Broadcom/stblinux: ARM: dts: bcm2835: add index to the ethernet alias ARM: dts: bcm2835: fix uart0/uart1 pins ARM: dts: bcm2835: fix i2c0 pins ARM: dts: bcm2835: fix uart0 pinctrl node names Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
d5d332d3f7 |
devicetree: Move include prefixes from arch to separate directory
We use a directory under arch/$ARCH/boot/dts as an include path
that has links outside of the subtree to find dt-bindings from under
include/dt-bindings. That's been working well, but new DT architectures
haven't been adding them by default.
Recently there's been a desire to share some of the DT material between
arm and arm64, which originally caused developers to create symlinks or
relative includes between the subtrees. This isn't ideal -- it breaks
if the DT files aren't stored in the exact same hierarchy as the kernel
tree, and generally it's just icky.
As a somewhat cleaner solution we decided to add a $ARCH/ prefix link
once, and allow DTS files to reference dtsi (and dts) files in other
architectures that way.
Original approach was to create these links under each architecture,
but it lead to the problem of recursive symlinks.
As a remedy, move the include link directories out of the architecture
trees into a common location. At the same time, they can now share one
directory and one dt-bindings/ link as well.
Fixes:
|
||
|
Olof Johansson
|
5252d73756 |
Linux 4.12-rc1
-----BEGIN PGP SIGNATURE----- iQEcBAABAgAGBQJZF2pwAAoJEHm+PkMAQRiG9aAIAJJyV6Ux9kaX+glqO3KIs0wm 0K/yqMOv1JTfJ1UUgY4iZbk5XOPPmXv1bdKJFECZfuAHdymJUF/RVNNvDlZbaLdd K8vDEi92eRwcf07a5b/Q2F8yNfADKKmRAA/oAbuQLBhJ0dPHig70PIvi9gq9kqiE Ft1MinbsZLavYatLm7oVDr/nsYebEDMGwTy0EX5bF2YjydfAlCvVWnI5ld5wisiV 0fQF4W7MMjjcpAzG8uq3atEB8iQcWS2Ykz2chZRbYzHcdV2WJW751Vge9xc05Hzi rxlqn6peZFiFyM0qdPLhY0ktGzSTZcCFeb3aZicvm5aOamy2KJjOSZrEwjU8kts= =VHpx -----END PGP SIGNATURE----- Merge tag 'v4.12-rc1' into fixes We've received a few fixes branches with -rc1 as base, but our contents was still at pre-rc1. Merge it in expliticly to make 'git merge --log' clear on hat was actually merged. Signed-off-by: Olof Johansson <olof@lixom.net> |
||
Ravikumar Kattekola
|
bca5238816 |
ARM: dts: dra7: Reduce cpu thermal shutdown temperature
On dra7, as per TRM, the HW shutdown (TSHUT) temperature is hardcoded to 123C and cannot be modified by SW. This means when the temperature reaches 123C HW asserts TSHUT output which signals a warm reset. This reset is held until the temperature goes below the TSHUT low (105C). While in SW, the thermal driver continuously monitors current temperature and takes decisions based on whether it reached an alert or a critical point. The intention of setting a SW critical point is to prevent force reset by HW and instead do an orderly_poweroff(). But if the SW critical temperature is greater than or equal to that of HW then it defeats the purpose. To address this and let SW take action before HW does keep the SW critical temperature less than HW TSHUT value. The value for SW critical temperature was chosen as 120C just to ensure we give SW sometime before HW catches up. Document reference SPRUI30C – DRA75x, DRA74x Technical Reference Manual - November 2016 SPRUHZ6H - AM572x Technical Reference Manual - November 2016 Tested on: DRA75x PG 2.0 Rev H EVM Signed-off-by: Ravikumar Kattekola <rk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> |
||
Adam Ford
|
56322e1232 |
ARM: dts: LogicPD Torpedo: Fix camera pin mux
Fix commit
|
||
Hans Verkuil
|
f0b8dca833 |
ARM: dts: omap4: enable CEC pin for Pandaboard A4 and ES
The CEC pin was always pulled up, making it impossible to use it. Change to PIN_INPUT so it can be used by the new CEC support. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> |
||
Andreas Kemnade
|
910958b65c |
ARM: dts: gta04: fix polarity of clocks for mcbsp4
The clock polarity setting of the mcbsp connected to the modem was wrong so almost only noise was received. With this patch it is also the same as it was on earlier non-dt kernels where it was working properly Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Tony Lindgren <tony@atomide.com> |
||
Keerthy
|
7c62de5f3f |
ARM: dts: dra7: Add power hold and power controller properties to palmas
Add power hold and power controller properties to palmas node. This is needed to shutdown pmic correctly on boards with powerhold set. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> |
||
Leonard Crestez
|
d8581c7c8b |
ARM: dts: imx6sx-sdb: Remove OPP override
The board file for imx6sx-sdb overrides cpufreq operating points to use
higher voltages. This is done because the board has a shared rail for
VDD_ARM_IN and VDD_SOC_IN and when using LDO bypass the shared voltage
needs to be a value suitable for both ARM and SOC.
This only applies to LDO bypass mode, a feature not present in upstream.
When LDOs are enabled the effect is to use higher voltages than necessary
for no good reason.
Setting these higher voltages can make some boards fail to boot with ugly
semi-random crashes reminiscent of memory corruption. These failures only
happen on board rev. C, rev. B is reported to still work.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Fixes:
|
||
Fabio Estevam
|
2fe4bff351 |
ARM: dts: imx53-qsrb: Pulldown PMIC IRQ pin
Currently the following errors are seen: [ 14.015056] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 27.321093] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 27.411681] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 27.456281] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 30.527106] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 36.596900] mc13xxx 0-0008: Failed to read IRQ status: -6 Also when reading the interrupts via 'cat /proc/interrupts' the PMIC GPIO interrupt counter does not stop increasing. The reason for the storm of interrupts is that the PUS field of register IOMUXC_SW_PAD_CTL_PAD_CSI0_DAT5 is currently configured as: 10 : 100k pullup and the PMIC interrupt is being registered as IRQ_TYPE_LEVEL_HIGH type, which is the correct type as per the MC34708 datasheet. Use the default power on value for the IOMUX, which sets PUS field as: 00: 360k pull down This prevents the spurious PMIC interrupts from happening. Commit |
||
Florian Fainelli
|
b155f05dc5 |
This pull request brings back bcm2835 DT fixups from Baruch Siach that
got misplaced after a PR for 4.11 got rejected. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE/JuuFDWp9/ZkuCBXtdYpNtH8nugFAljdV0wACgkQtdYpNtH8 nugY6Q//a8M4fzc878CjvARB8Y1ezIDJn71YzNkRr59PmYbdHck9IXCrJCglODMO kX8YBlYvH6aoYxZ0gvalCdTMwrzy3h63bkc8RtF1PbNnSlQppJ9EyvKLP+eZmm4H HQZXCLiFU97YThXuPozIBtJrMhFR623+Q0offp0nrTNcl+jklFFAA2zjH+GoKl0N SqAVuQEOO6Ru3yqFzCwMtedCgXtAZrp9Ady6/AjXnhH9GCmhsuL8DR7dr9qlzeWU NPlQMwdbaRe5kGd01VcSbJwQigiXxpuKtz5FISAA5SS9MJrFzH+dx7hOvvhLBNaE uyG2B2abV5zKltxZIm7J/CIpPN4JfSQVfcL3DtAlIdlBY8kjd68Dqi8wYqIsvRPd s0LqTaXQwvnvgVK8Gd9tUQVsGd8mL70rf5Kj40nhc8tijXAfcKB0C+ft8knnmyN5 W4Us0zHUCEY0uGyXg7I+JU6tDhOGaGU2pRp3nFAPNbSllMaAfRQhnybzegryvyUe R0bEI1VF/v32tuxcH180HZnvZPwkzzyTh11OxAkxNxHIGLCLPYNGrsaLj7eNUcWK DyNzSWCsMjgrVGV0o/0JFHGu9oVpdX1LheSTSXaYgLbWi+O+7Be8HT3q1GI553Pd LI39tPZCC9nL3ncHqPVb0bD58VIvllIE2n+XICKQ6TA24LTPJos= =mCCH -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIcBAABCAAGBQJZF85cAAoJEIfQlpxEBwcEr5cP/j+Ss+ywZs2nv+121V6DoG16 jQJgrQ5g+GOcPumXJ/eoiONgTX28awSdmjLbQgKK6rUNea17KtBTD75zwiO/iNh9 D6hagRHg9m1vqAw2Dwkqkrjh+NKL0xrY10pE6t+IMfApW6WJJI9haubZmPFpA4Rh n/x83TavunuAfoYqdhLAZn+tMrOkgLjkFqCdtmOLHnkyyOax0eDX0zYAjM1+9jXT mKQ1v6sVJ3+kCc9bjHhPgR6ccejCJR//wMGUTmaahYlZIM+oHKV3KfGEL4VrH/ji XthHglLpr0+uyosY4q0x00eDtWwCGDmexK/C7lBw/10sG4ENIj+Tma8tSQYlla6H rMnH5VpGcvWvsYCL+wJ47Tqe8z2I/ulp4NSMIA8SzD4DjDD2SMlQvv9iKUAguw5r MMDkXxtEb22xu5SZLEoQdyOfu+MVZeSQkSVtnRSB8BXE++aYp9e4ZDH8V/+xuQQU 7cg9KyXHQnwMki5+JmziaPJX743fHKV7kZ6Lj5r6YF0EkMITJ3rud1Wg4rh6Pv66 paVfj259IudHWljshMfzvEGeTiwdEiwB12K47pWBBhVuucA4QzJnOROBbB5INy0W aVHZ5LYsE7QZ+KkSVWBbPW8XezwqhvHbJ4zXhh/q6jLjIJHqckR+HRPFz/neereR FtejY7440d+ePhk53VEv =h9/E -----END PGP SIGNATURE----- Merge tag 'bcm2835-dt-next-2017-03-30' into devicetree/fixes This pull request brings back bcm2835 DT fixups from Baruch Siach that got misplaced after a PR for 4.11 got rejected. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> |
||
Linus Torvalds
|
b5a53b61a2 |
Sort of on the quieter side this time, which is probably due more
to me not catching up as quickly on patch review than anything else.
Overall it seems normal though, a few small changes to the core, mostly
small non-critical fixes here and there as well as driver updates for new
and existing hardware support. The biggest things are the TI clk driver
rework to lay the groundwork for clkctrl support in the next merge window
and the AmLogic audio/graphics clk support.
Core:
* clk_possible_parents debugfs file so we know which parents a clk
could possibly have
* Fix to make clk rate change notifiers stop on the first failure instead
of continuing
New Drivers:
* Mediatek MT6797 SoCs
* hi655x PMIC clks
* AmLogic Meson SoC i2s and spdif audio clks and Mali graphics clks
* Allwinner H5 SoCs and PRCM hardware
Updates:
* Nvidia Tegra T210 cleanups and non-critical fixes
* TI OMAP cleanups in preparation for clkctrl support
* Trivial fixes like kcalloc(), devm_* conversions, and seq_puts()
* ZTE zx296718 SoC VGA clks
* Rockchip clk-ids, fixups, and rename of rk1108 to rv1108
* Support for IDT VersaClock 5P49V5935
* Renesas R-Car H3 and M3-W IMR clks and ES2.0 rev of R-Car H3 support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=/5a/
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Sort of on the quieter side this time, which is probably due more to
me not catching up as quickly on patch review than anything else.
Overall it seems normal though, a few small changes to the core,
mostly small non-critical fixes here and there as well as driver
updates for new and existing hardware support.
The biggest things are the TI clk driver rework to lay the groundwork
for clkctrl support in the next merge window and the AmLogic
audio/graphics clk support.
Core:
- clk_possible_parents debugfs file so we know which parents a clk
could possibly have
- Fix to make clk rate change notifiers stop on the first failure
instead of continuing
New Drivers:
- Mediatek MT6797 SoCs
- hi655x PMIC clks
- AmLogic Meson SoC i2s and spdif audio clks and Mali graphics clks
- Allwinner H5 SoCs and PRCM hardware
Updates:
- Nvidia Tegra T210 cleanups and non-critical fixes
- TI OMAP cleanups in preparation for clkctrl support
- trivial fixes like kcalloc(), devm_* conversions, and seq_puts()
- ZTE zx296718 SoC VGA clks
- Rockchip clk-ids, fixups, and rename of rk1108 to rv1108
- IDT VersaClock 5P49V5935 support
- Renesas R-Car H3 and M3-W IMR clks and ES2.0 rev of R-Car H3
support"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (151 commits)
clk: x86: pmc-atom: Checking for IS_ERR() instead of NULL
clk: ti: divider: try to fix ti_clk_register_divider
clk: mvebu: Use kcalloc() in two functions
clk: mvebu: Use kcalloc() in of_cpu_clk_setup()
clk: nomadik: Delete error messages for a failed memory allocation in two functions
clk: nomadik: Use seq_puts() in nomadik_src_clk_show()
clk: Improve a size determination in two functions
clk: Replace four seq_printf() calls by seq_putc()
clk: si5351: Delete an error message for a failed memory allocation in si5351_i2c_probe()
clk: si5351: Use devm_kcalloc() in si5351_i2c_probe()
clk: at91: Use kcalloc() in of_at91_clk_pll_get_characteristics()
reset: mediatek: Add MT2701 ethsys reset controller include file
clk: mediatek: add mt2701 ethernet reset
clk: hi6220: Add the hi655x's pmic clock
clk: ti: fix building without legacy omap3
clk: ti: fix linker error with !SOC_OMAP4
clk: hi3620: Fix a typo in one variable name
clk: hi3620: Delete error messages for a failed memory allocation in two functions
clk: hi3620: Use kcalloc() in hi3620_mmc_clk_init()
clk: hisilicon: Delete error messages for failed memory allocations in hisi_clk_init()
...
|
||
Arnd Bergmann
|
e942661130 |
DTS fixes
- mt8173: fix mmc parameters - set timer frequency explicitly and force the driver to set it -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABAgAGBQJZEfOYAAoJELQ5Ylss8dNDizsP/2/tAoJ66wxdiO3Jd4Wgq+Kb eFwwre2WxcBjuJyzzIxIgnDib0TKgKSjo5qcakSjmp4RNg18Mt1DRP+ty6eJ5Yh8 2c+xtj31lcfCrpi1N6hKqqoW8yYfgrHuQxsrlS4wrUs9YcDcDk6dWAoJ5tUJepE+ TrgZ5zqUiseTW26ULFvUlXDg/qf1rBQPVMeOiV/fmGnyjPvTL5simmLnyR/DZjXO gCccVvqDs1XnzBT0cYDovL+HeayQ7fLRrhpoPiyLFycr5ESSIDYvTnfuFd8Vz5qR 5bM5WVmOfXJ93n0qrWoN+ILQXir3a8Lk9j+9Nx4YuMS0V4CwHFkYZT3WFCFuN76p RwHNI28LQug9d9EDKfX0TgqyHvlE+VLGjIv0lYlH5gEGp0qX2QAwU+g+nhhHiugB GTNv6BwRtceMx7iILsEUnEShYwN5JZmFHeCQyjqGLhVT2Hb2kwudRzA157ObaZNV NLb48+M4qRH9seOM/bp7iARDgS+L9mevJ7IF7OMCdogWDn0Cq+9MvclLR8c8u7Ml M5Nuuto8v2yoXzT7LEp5o4Q8ZxzE4rPsXBsgDu5NQYr5lQFcWskvG3yZJyo5HRA4 OW1ERkRhOcKRQm9bYTVtZZ2au3TJM6P0UBgvY6hFwwRmgHX5MkDBULj8a/vmK2gc 0EvcriDgNEdOgoETO4+y =yOfu -----END PGP SIGNATURE----- Merge tag 'v4.11-next-fixes' of https://github.com/mbgg/linux-mediatek into fixes Pull "DTS fixes" from Matthias Brugger: - mt8173: fix mmc parameters - set timer frequency explicitly and force the driver to set it * tag 'v4.11-next-fixes' of https://github.com/mbgg/linux-mediatek: ARM64: dts: mediatek: configure some fixed mmc parameters arm: dts: mt7623: add clock-frequency to the a7 timer node to mt7623.dtsi |
||
|
Linus Torvalds
|
c6778ff813 |
ARM: 64-bit DT updates
Device-tree updates for arm64 platforms. Just as with 32-bit, a bunch of smaller
changes, but also some new platforms that are worth mentioning:
* Rockchip RK3399 platforms for Chromebooks, including Samsung Chromebook
Plus (Kevin)
* Orange Pi PC2 (Allwinner H5)
* Freescale LS2088A and LS1088A SoCs
* Expanded support for Nvidia Tegra186 (and Jetson TX2)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=q3Ix
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM 64-bit DT updates from Olof Johansson:
"Device-tree updates for arm64 platforms. Just as with 32-bit, a bunch
of smaller changes, but also some new platforms that are worth
mentioning:
- Rockchip RK3399 platforms for Chromebooks, including Samsung
Chromebook Plus (Kevin)
- Orange Pi PC2 (Allwinner H5)
- Freescale LS2088A and LS1088A SoCs
- Expanded support for Nvidia Tegra186 (and Jetson TX2)"
* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (180 commits)
arm64: dts: Add basic DT to support Spreadtrum's SP9860G
arm64: dts: exynos: Use - instead of @ for DT OPP entries
arm64: dts: exynos: Add support for s6e3hf2 panel device on TM2e board
arm64: dts: juno: add information about L1 and L2 caches
arm64: dts: juno: fix few unit address format warnings
arm64: marvell: dts: enable the crypto engine on the Armada 8040 DB
arm64: marvell: dts: enable the crypto engine on the Armada 7040 DB
arm64: marvell: dts: add crypto engine description for 7k/8k
arm64: dts: marvell: add sdhci support for Armada 7K/8K
arm64: dts: marvell: add eMMC support for Armada 37xx
arm64: dts: hisi: add pinctrl dtsi file for HiKey960 development board
arm64: dts: hisi: add drive strength levels of the pins for Hi3660 SoC
arm64: dts: hisi: enable the NIC and SAS for the hip07-d05 board
arm64: dts: hisi: add SAS nodes for the hip07 SoC
arm64: dts: hisi: add RoCE nodes for the hip07 SoC
arm64: dts: hisi: add network related nodes for the hip07 SoC
arm64: dts: hisi: add mbigen nodes for the hip07 SoC
arm64: dts: rockchip: fix the memory size of PX5 Evaluation board
arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board
dt-bindings: arm: hisilicon: add bindings for hi3798cv200 SoC and Poplar board
...
|
||
|
Linus Torvalds
|
85d604902e |
ARM: Device-tree updates
Device-tree continues to see lots of updates. The majority of patches
here are smaller changes for new hardware on existing platforms, and
there are a few larger changes worth pointing out.
Major new platforms:
- Gemini has been ported to DT, so a handful of "new" platforms moved over
from board files
- Rockchip RK3288 support for Tinkerboard and Phytec phyCORE-RK3288 SoM and RDK
- A bunch of embedded platforms, several Linksys platforms, Synology DS116,
- Motorola Droid4 (really old OMAP-based phone) support is added.
Some refactorings, i.e. Allwinner H3/H5 support is commonalized.
And lots of smaller changes, cleanups, etc. See shortlog for more description
We're adding ability to cross-include DT files between arm and arm64,
by creating appropriate links in the dt-include directory, and using arm/
and arm64/ as include prefixes. This will avoid other local hacks such as
per-file links between the two arch trees (this broke for external mirroring
of DT contents). Now they can just provide their own appropriate dt-include
hierarcy per platform.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=v6w6
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM Device-tree updates from Olof Johansson:
"Device-tree continues to see lots of updates. The majority of patches
here are smaller changes for new hardware on existing platforms, and
there are a few larger changes worth pointing out.
Major new platforms:
- Gemini has been ported to DT, so a handful of "new" platforms moved
over from board files
- Rockchip RK3288 support for Tinkerboard and Phytec phyCORE-RK3288
SoM and RDK
- A bunch of embedded platforms, several Linksys platforms, Synology
DS116,
- Motorola Droid4 (really old OMAP-based phone) support is added.
Some refactorings, i.e. Allwinner H3/H5 support is commonalized.
And lots of smaller changes, cleanups, etc. See shortlog for more
description
We're adding ability to cross-include DT files between arm and arm64,
by creating appropriate links in the dt-include directory, and using
arm/ and arm64/ as include prefixes. This will avoid other local hacks
such as per-file links between the two arch trees (this broke for
external mirroring of DT contents). Now they can just provide their
own appropriate dt-include hierarcy per platform"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (349 commits)
ARM: dts: exynos: Use - instead of @ for DT OPP entries
arm: spear6xx: add DT description of the ADC on SPEAr600
arm: spear6xx: remove unneeded pinctrl properties in spear600-evb
arm: spear6xx: switch spear600-evb to the new flash partition DT binding
arm: spear6xx: fix spaces in spear600-evb.dts
arm: spear6xx: use node labels in spear600-evb.dts
arm: spear6xx: add labels to various nodes in spear600.dtsi
ARM: dts: vexpress: fix few unit address format warnings
ARM: dts: at91: sama5d3_xplained: not all ADC channels are available
ARM: dts: at91: sama5d3_xplained: fix ADC vref
ARM: dts: at91: add envelope detector mux to the Axentia TSE-850
ARM: dts: armada-38x: label USB and SATA nodes
ARM: dts: imx6q-utilite-pro: add hpd gpio
ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply
ARM: dts: imx6qdl-sabresd: Set LDO regulator supply
ARM: dts: imx: add Gateworks Ventana GW5903 support
ARM: dts: i.MX25: add AIPS control registers
ARM: dts: imx7-colibri: add Carrier Board 3.3V/5V regulators
ARM: dts: imx7-colibri: remove 1.8V fixed regulator
ARM: dts: imx7-colibri: allow to disable Ethernet rail
...
|
||
John Crispin
|
7e6c7fe95e |
arm: dts: mt7623: add clock-frequency to the a7 timer node to mt7623.dtsi
We need to tell the driver what the timers frequency is and that the core has not be configured by the bootrom. Not doing so makes the unit not boot. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> |
||
|
Linus Torvalds
|
9c6ee01ed5 |
Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM updates from Russell King:
"Lots of little things this time:
- allow modules to be autoloaded according to the HWCAP feature bits
(used primarily for crypto modules)
- split module core and init PLT sections, since the core code and
init code could be placed far apart, and the PLT sections need to
be local to the code block.
- three patches from Chris Brandt to allow Cortex-A9 L2 cache
optimisations to be disabled where a SoC didn't wire up the out of
band signals.
- NoMMU compliance fixes, avoiding corruption of vector table which
is not being used at this point, and avoiding possible register
state corruption when switching mode.
- fixmap memory attribute compliance update.
- remove unnecessary locking from update_sections_early()
- ftrace fix for DEBUG_RODATA with !FRAME_POINTER"
* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8672/1: mm: remove tasklist locking from update_sections_early()
ARM: 8671/1: V7M: Preserve registers across switch from Thread to Handler mode
ARM: 8670/1: V7M: Do not corrupt vector table around v7m_invalidate_l1 call
ARM: 8668/1: ftrace: Fix dynamic ftrace with DEBUG_RODATA and !FRAME_POINTER
ARM: 8667/3: Fix memory attribute inconsistencies when using fixmap
ARM: 8663/1: wire up HWCAP/HWCAP2 feature bits to the CPU modalias
ARM: 8666/1: mm: dump: Add domain to output
ARM: 8662/1: module: split core and init PLT sections
ARM: 8661/1: dts: r7s72100: add l2 cache
ARM: 8660/1: shmobile: r7s72100: Enable L2 cache
ARM: 8659/1: l2c: allow CA9 optimizations to be disabled
|
||
|
Linus Torvalds
|
e87d51ac61 |
media updates for v4.12-rc1
-----BEGIN PGP SIGNATURE-----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=Snzj
-----END PGP SIGNATURE-----
Merge tag 'media/v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
"Media updates for v4.12-rc1:
- new driver to support mediatek jpeg in hardware codec
- rc-lirc, s5p-cec and st-cec staging drivers got promoted
- hardware histogram support for vsp1 driver
- added Virtual Media Controller driver, to make easier to test the
media controller
- added a new CEC driver (rainshadow-cec)
- removed two staging LIRC drivers for obscure hardware that are too
obsolete
- added support for Intel SR300 Depth camera
- some improvements at CEC and RC core
- lots of driver cleanups, improvements all over the tree
With this series, we're finally getting rid of the LIRC staging
driver. There's just one left (lirc_zilog), with require more care,
as part of its functionality (IR RX) is already provided by another
driver. Work in progress to convert it on the proper way"
* tag 'media/v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (304 commits)
[media] ov2640: print error if devm_*_optional*() fails
[media] atmel-isc: Fix the static checker warning
[media] ov2640: add support for MEDIA_BUS_FMT_YVYU8_2X8 and MEDIA_BUS_FMT_VYUY8_2X8
[media] ov2640: fix vflip control
[media] ov2640: fix duplicate width+height returning from ov2640_select_win()
[media] ov2640: add missing write to size change preamble
[media] ov2640: add information about DSP register 0xc7
[media] ov2640: improve banding filter register definitions/documentation
[media] ov2640: fix init sequence alignment
[media] ov2640: make GPIOLIB an optional dependency
[media] xc5000: fix spelling mistake: "calibration"
[media] vidioc-queryctrl.rst: fix menu/int menu references
[media] media-entity: only call dev_dbg_obj if mdev is not NULL
[media] pixfmt-meta-vsp1-hgo.rst: remove spurious '-'
[media] mtk-vcodec: avoid warnings because of empty macros
[media] coda: bump maximum number of internal framebuffers to 17
[media] media: mtk-vcodec: remove informative log
[media] subdev-formats.rst: remove spurious '-'
[media] dw2102: limit messages to buffer size
[media] ttusb2: limit messages to buffer size
...
|
||
|
Linus Torvalds
|
68fed41e0f |
This is the bulk of pin control changes for the v4.12 cycle:
Core changes:
- Add bi-directional and output-enable pin configurations to
the generic bindings and generic pin controlling core.
New drivers or subdrivers:
- Armada 37xx SoC pin controller and GPIO support.
- Axis ARTPEC-6 SoC pin controller support.
- AllWinner A64 R_PIO controller support, and opening up the
AllWinner sunxi driver for ARM64 use.
- Rockchip RK3328 support.
- Renesas R-Car H3 ES2.0 support.
- STM32F469 support in the STM32 driver.
- Aspeed G4 and G5 pin controller support.
Improvements:
- A whole slew of realtime improvements to drivers implementing
irqchips: BCM, AMD, SiRF, sunxi, rockchip.
- Switch meson driver to get the GPIO ranges from the device
tree.
- Input schmitt trigger support on the Rockchip driver.
- Enable the sunxi (AllWinner) driver to also be used on ARM64
silicon.
- Name the Qualcomm QDF2xxx GPIO lines.
- Support GMMR GPIO regions on the Intel Cherryview. This
fixes a serialization problem on these platforms.
- Pad retention support for the Samsung Exynos 5433.
- Handle suspend-to-ram in the AT91-pio4 driver.
- Pin configuration support in the Aspeed driver.
Cleanups:
- The final name of Rockchip RK1108 was RV1108 so rename the
driver and variables to stay consistent.
-----BEGIN PGP SIGNATURE-----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=BCaA
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v4.12 cycle.
The extra week before the merge window actually resulted in some of
the type of fixes that usually arrive after the merge window already
starting to trickle in from eager developers using -next, I'm
impressed.
I have recruited a Samsung subsubsystem maintainer (Krzysztof) to deal
with the onset of Samsung patches. It works great.
Apart from that it is a boring round, just incremental updates and
fixes all over the place, no serious core changes or anything exciting
like that. The most pleasing to see is Julia Cartwrights work to audit
the irqchip-providing drivers for realtime locking compliance. It's
one of those "I should really get around to looking into that" things
that have been on my TODO list since forever.
Summary:
Core changes:
- add bi-directional and output-enable pin configurations to the
generic bindings and generic pin controlling core.
New drivers or subdrivers:
- Armada 37xx SoC pin controller and GPIO support.
- Axis ARTPEC-6 SoC pin controller support.
- AllWinner A64 R_PIO controller support, and opening up the
AllWinner sunxi driver for ARM64 use.
- Rockchip RK3328 support.
- Renesas R-Car H3 ES2.0 support.
- STM32F469 support in the STM32 driver.
- Aspeed G4 and G5 pin controller support.
Improvements:
- a whole slew of realtime improvements to drivers implementing
irqchips: BCM, AMD, SiRF, sunxi, rockchip.
- switch meson driver to get the GPIO ranges from the device tree.
- input schmitt trigger support on the Rockchip driver.
- enable the sunxi (AllWinner) driver to also be used on ARM64
silicon.
- name the Qualcomm QDF2xxx GPIO lines.
- support GMMR GPIO regions on the Intel Cherryview. This fixes a
serialization problem on these platforms.
- pad retention support for the Samsung Exynos 5433.
- handle suspend-to-ram in the AT91-pio4 driver.
- pin configuration support in the Aspeed driver.
Cleanups:
- the final name of Rockchip RK1108 was RV1108 so rename the driver
and variables to stay consistent"
* tag 'pinctrl-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits)
pinctrl: mediatek: Add missing pinctrl bindings for mt7623
pinctrl: artpec6: Fix return value check in artpec6_pmx_probe()
pinctrl: artpec6: Remove .owner field for driver
pinctrl: tegra: xusb: Silence sparse warnings
ARM: at91/at91-pinctrl documentation: fix spelling mistake: "contoller" -> "controller"
pinctrl: make artpec6 explicitly non-modular
pinctrl: aspeed: g5: Add pinconf support
pinctrl: aspeed: g4: Add pinconf support
pinctrl: aspeed: Add core pinconf support
pinctrl: aspeed: Document pinconf in devicetree bindings
pinctrl: Add st,stm32f469-pinctrl compatible to stm32-pinctrl
pinctrl: stm32: Add STM32F469 MCU support
Documentation: dt: Remove ngpios from stm32-pinctrl binding
pinctrl: stm32: replace device_initcall() with arch_initcall()
pinctrl: stm32: add possibility to use gpio-ranges to declare bank range
pinctrl: armada-37xx: Add gpio support
pinctrl: armada-37xx: Add pin controller support for Armada 37xx
pinctrl: dt-bindings: Add documentation for Armada 37xx pin controllers
pinctrl: core: Make pinctrl_init_controller() static
pinctrl: generic: Add bi-directional and output-enable
...
|
||
|
Linus Torvalds
|
8d65b08deb |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Millar:
"Here are some highlights from the 2065 networking commits that
happened this development cycle:
1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri)
2) Add a generic XDP driver, so that anyone can test XDP even if they
lack a networking device whose driver has explicit XDP support
(me).
3) Sparc64 now has an eBPF JIT too (me)
4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei
Starovoitov)
5) Make netfitler network namespace teardown less expensive (Florian
Westphal)
6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana)
7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger)
8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky)
9) Multiqueue support in stmmac driver (Joao Pinto)
10) Remove TCP timewait recycling, it never really could possibly work
well in the real world and timestamp randomization really zaps any
hint of usability this feature had (Soheil Hassas Yeganeh)
11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay
Aleksandrov)
12) Add socket busy poll support to epoll (Sridhar Samudrala)
13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso,
and several others)
14) IPSEC hw offload infrastructure (Steffen Klassert)"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits)
tipc: refactor function tipc_sk_recv_stream()
tipc: refactor function tipc_sk_recvmsg()
net: thunderx: Optimize page recycling for XDP
net: thunderx: Support for XDP header adjustment
net: thunderx: Add support for XDP_TX
net: thunderx: Add support for XDP_DROP
net: thunderx: Add basic XDP support
net: thunderx: Cleanup receive buffer allocation
net: thunderx: Optimize CQE_TX handling
net: thunderx: Optimize RBDR descriptor handling
net: thunderx: Support for page recycling
ipx: call ipxitf_put() in ioctl error path
net: sched: add helpers to handle extended actions
qed*: Fix issues in the ptp filter config implementation.
qede: Fix concurrency issue in PTP Tx path processing.
stmmac: Add support for SIMATIC IOT2000 platform
net: hns: fix ethtool_get_strings overflow in hns driver
tcp: fix wraparound issue in tcp_lp
bpf, arm64: fix jit branch offset related to ldimm64
bpf, arm64: implement jiting of BPF_XADD
...
|
||
|
Linus Torvalds
|
5a0387a8a8 |
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.12: API: - Add batch registration for acomp/scomp - Change acomp testing to non-unique compressed result - Extend algorithm name limit to 128 bytes - Require setkey before accept(2) in algif_aead Algorithms: - Add support for deflate rfc1950 (zlib) Drivers: - Add accelerated crct10dif for powerpc - Add crc32 in stm32 - Add sha384/sha512 in ccp - Add 3des/gcm(aes) for v5 devices in ccp - Add Queue Interface (QI) backend support in caam - Add new Exynos RNG driver - Add ThunderX ZIP driver - Add driver for hardware random generator on MT7623 SoC" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (101 commits) crypto: stm32 - Fix OF module alias information crypto: algif_aead - Require setkey before accept(2) crypto: scomp - add support for deflate rfc1950 (zlib) crypto: scomp - allow registration of multiple scomps crypto: ccp - Change ISR handler method for a v5 CCP crypto: ccp - Change ISR handler method for a v3 CCP crypto: crypto4xx - rename ce_ring_contol to ce_ring_control crypto: testmgr - Allow ecb(cipher_null) in FIPS mode Revert "crypto: arm64/sha - Add constant operand modifier to ASM_EXPORT" crypto: ccp - Disable interrupts early on unload crypto: ccp - Use only the relevant interrupt bits hwrng: mtk - Add driver for hardware random generator on MT7623 SoC dt-bindings: hwrng: Add Mediatek hardware random generator bindings crypto: crct10dif-vpmsum - Fix missing preempt_disable() crypto: testmgr - replace compression known answer test crypto: acomp - allow registration of multiple acomps hwrng: n2 - Use devm_kcalloc() in n2rng_probe() crypto: chcr - Fix error handling related to 'chcr_alloc_shash' padata: get_next is never NULL crypto: exynos - Add new Exynos RNG driver ... |
||
|
Linus Torvalds
|
174ddfd5df |
Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"The timer departement delivers:
- more year 2038 rework
- a massive rework of the arm achitected timer
- preparatory patches to allow NTP correction of clock event devices
to avoid early expiry
- the usual pile of fixes and enhancements all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (91 commits)
timer/sysclt: Restrict timer migration sysctl values to 0 and 1
arm64/arch_timer: Mark errata handlers as __maybe_unused
Clocksource/mips-gic: Remove redundant non devicetree init
MIPS/Malta: Probe gic-timer via devicetree
clocksource: Use GENMASK_ULL in definition of CLOCKSOURCE_MASK
acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver
clocksource: arm_arch_timer: add GTDT support for memory-mapped timer
acpi/arm64: Add memory-mapped timer support in GTDT driver
clocksource: arm_arch_timer: simplify ACPI support code.
acpi/arm64: Add GTDT table parse driver
clocksource: arm_arch_timer: split MMIO timer probing.
clocksource: arm_arch_timer: add structs to describe MMIO timer
clocksource: arm_arch_timer: move arch_timer_needs_of_probing into DT init call
clocksource: arm_arch_timer: refactor arch_timer_needs_probing
clocksource: arm_arch_timer: split dt-only rate handling
x86/uv/time: Set ->min_delta_ticks and ->max_delta_ticks
unicore32/time: Set ->min_delta_ticks and ->max_delta_ticks
um/time: Set ->min_delta_ticks and ->max_delta_ticks
tile/time: Set ->min_delta_ticks and ->max_delta_ticks
score/time: Set ->min_delta_ticks and ->max_delta_ticks
...
|
||
Rafael J. Wysocki
|
0807ee0f52 |
Merge branch 'pm-cpufreq'
* pm-cpufreq: (37 commits) cpufreq: Add Tegra186 cpufreq driver cpufreq: imx6q: Fix error handling code cpufreq: imx6q: Set max suspend_freq to avoid changes during suspend cpufreq: imx6q: Fix handling EPROBE_DEFER from regulator cpufreq: schedutil: Use policy-dependent transition delays cpufreq: schedutil: Reduce frequencies slower cpufreq: intel_pstate: Add support for Gemini Lake cpufreq: intel_pstate: Eliminate intel_pstate_get_min_max() cpufreq: intel_pstate: Do not walk policy->cpus cpufreq: intel_pstate: Introduce pid_in_use() cpufreq: intel_pstate: Drop struct cpu_defaults cpufreq: intel_pstate: Move cpu_defaults definitions cpufreq: intel_pstate: Add update_util callback to pstate_funcs cpufreq: intel_pstate: Use different utilization update callbacks cpufreq: intel_pstate: Modify check in intel_pstate_update_status() cpufreq: intel_pstate: Drop driver_registered variable cpufreq: intel_pstate: Skip unnecessary PID resets on init cpufreq: intel_pstate: Set HWP sampling interval once cpufreq: intel_pstate: Clean up intel_pstate_busy_pid_reset() cpufreq: intel_pstate: Fold intel_pstate_reset_all_pid() into the caller ... |
||
|
Arnd Bergmann
|
b9f34da74e |
Fix DTC warnings in Exynos ARMv7 Device Tree sources.
-----BEGIN PGP SIGNATURE----- iQIcBAABCAAGBQJY+jQpAAoJEME3ZuaGi4PXmkAP/i9Sbf+bYZqa32Zv8zh0hu8r KQ6iJ7N7fANYqBe+/H7gBXvjLq5VWsPMMkJSDBOVHWXH76iQAji7w+ORc75VlWXw gpx+rLQMflMAFk7yq7Ern+V7Nj+ZmEZSUK455//M2cBPBsrpSt9qtKVZd/IxzcbP zexpcwYilTv890sXtJfOVZgHzBTQ996XbD0VrI2HAH1XFiGgEFEyViSgPpikS/gZ MyQjSRi0t+ETp45oNIQuMcNgBrR1naDm+VVOhiQXNW3cXrDkQ0ENMrEGtpbaOC/X ngfNJk8f3wrGg+kS2H2v1/PeUYiWXNBTCFR/CNoBcDyvLHXEjPtI7LO/pAKKgfBQ H1Bqxquk+QvgtGJEoshuVOWJixjZ3WEAUZ3kNgYHp2YHf/+mvff6STgxb2RePj74 ZSZInREUST/mc8M3DzjCVGnMUPIpbvOQnWPLkdAmtWXxm4lyIblXV9YPJUjRsaTQ xpKhnpIpEG1N4mfb/VNGKm8kEs5MWV6j6ajejScTCnqgD+CGzTy9cVZKOMRd4MEz +1L+BOcR9lvnTey0WghVPrpl3CZAskVpI5gq2o7jrg2GsfTifZ4BxxQKktZXjcrM n6x9Hlr4yBT0zLzT36yfM5+jyzUuSv3EQHcgolcBdlSJX6isQwQJAZhXO9B824tA ckVPhI4X43BGscjszMTs =NymV -----END PGP SIGNATURE----- Merge tag 'samsung-dt-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Pull "Fix DTC warnings in Exynos ARMv7 Device Tree sources." from Krzysztof Kozłowski: * tag 'samsung-dt-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Use - instead of @ for DT OPP entries |
||
|
Arnd Bergmann
|
6d14b5a0ba |
ARMv7 VExpress DT fix for v4.12
A single fix to remove device tree warnings introduced with recently added checks in DTC -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABCAAGBQJY94/6AAoJEABBurwxfuKYGoMQAKyzboF8FXtOJ2nTQpHltuPS 1Tg64BQAPX9Af9OGfeTFldIKloQWsp5WUEAIvqID3s8pcabG8E+dwAt4pyzHcGas Vb+2zB8ZiWFrQImyLqSLZkd1fUueLB4JAYxx6lnR8A/BPD3r3itvcZkW7T4Tc60H 1V8fMEAav5GEPT99GPNCB26w4yJ990ZERF2zOIytqoKKbXn4ggQe7F/zjUpx6zVb 8csj+kKYeejTFH6PZ58/gsmga0ZbycA/8/IOTaagG7lYEMaaz2/pCgclm+GDT7Ta WvaH9YNCTeupeHqCwzyNglPIbnUeGBNb6Qc7OMD9orrIyqPDU5E0z3WcfsWzOywd V3SPPzOowGTPJ5CdK323eEKk4+i946H/VWO8hD+WgNTAHYHUuyTWhDERtaVMfAX8 c7+VHXd8v2FGPMguNTIFUQX/+KGCP4hIriF0UOz8Rg19eqwPw7sTudB3Jxjzzm// KWG6/no3yqYQVgWZnQ7kJnp/GCOeh39qUxfdpTlesUffweoOIMM00t1KzqsPw1jT XZA9gTR7MXoAcew1FF+D8BUnNRN5Gc6Ef/WO5mwYqk7GcAFGEANxM7LIMM7Sv+iy WXN+gmBUU0wLWmy1G+ZGRcSG9nhdpUPJfdwJKppZ8vr7xiDdjcXw6wg8Rg91idqj pUICwBctol04PqdbjHK+ =kv8P -----END PGP SIGNATURE----- Merge tag 'vexpress-dt-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt Pull "ARMv7 VExpress DT fix for v4.12" from Sudeep Holla: A single fix to remove device tree warnings introduced with recently added checks in DTC * tag 'vexpress-dt-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: ARM: dts: vexpress: fix few unit address format warnings |
||
Viresh Kumar
|
6a611d149a |
ARM: dts: exynos: Use - instead of @ for DT OPP entries
Compiling the DT file with W=1, DTC warns like follows: Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a unit name, but no reg property Fix this by replacing '@' with '-' as the OPP nodes will never have a "reg" property. Reported-by: Krzysztof Kozlowski <krzk@kernel.org> Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Rob Herring <robh@kernel.org> [k.kozlowski: Split patch per ARM and ARM64] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> |
||
David S. Miller
|
7b9f6da175 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
A function in kernel/bpf/syscall.c which got a bug fix in 'net' was moved to kernel/bpf/verifier.c in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Thomas Petazzoni
|
28a59b6166 |
arm: spear6xx: add DT description of the ADC on SPEAr600
The SPEAr600 has a built-in ADC, which already has a Device Tree binding described in Documentation/devicetree/bindings/staging/iio/adc/spear-adc.txt. This commit adds the description in the SPEAr600 Device Tree of this ADC device. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Thomas Petazzoni
|
8590b4e018 |
arm: spear6xx: remove unneeded pinctrl properties in spear600-evb
The spear6xx doesn't have a pinctrl driver, since the pinmux is globally defined through a single register, generally configured by the firmware/bootloader. Therefore, the pinctrl related properties in spear600-evb.dts are not necessary. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Thomas Petazzoni
|
4e7adc294e |
arm: spear6xx: switch spear600-evb to the new flash partition DT binding
This commit moves spear600-evb.dts to use the new flash partition Device Tree binding documented in Documentation/devicetree/bindings/mtd/partition.txt. As this Device Tree binding document says: "For backwards compatibility partitions as direct subnodes of the mtd device are supported. This use is discouraged." Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Thomas Petazzoni
|
d37c74a570 |
arm: spear6xx: fix spaces in spear600-evb.dts
This commit fixes a minor coding style issue in spear600-evb.dts: missing spaces around equal sign. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Thomas Petazzoni
|
1d72c2f27f |
arm: spear6xx: use node labels in spear600-evb.dts
Now that we have introduced node labels in spear600.dtsi, we can use them for spear600-evb.dts. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Thomas Petazzoni
|
85a390b0e2 |
arm: spear6xx: add labels to various nodes in spear600.dtsi
Having labels allows to more easily reference nodes in .dts files including spear600.dtsi. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
214b8b8e0e |
Alpine DT changes for 4.12
A bunch of clean up for Alpine device trees, nothing fancy. -----BEGIN PGP SIGNATURE----- iQIcBAABCgAGBQJY8R9iAAoJEFxNi8it27zYMTMP/1SE9M1Gy5nngeTxVTJeTvbf vTElGQ6FzV9HBkL88b3+fVcUWh0YTlffzUWE7cfPPOaaXkImYRF+7QrL8zht9nS8 SIIjS1j/wVBm0Zl4/vuYiMZJR0CJOLypFV8ELb24Xj96Mt7idUHGZNL4T8ygCd8W HoKNDhpstg7rHPJFjjDM6OanQbhTJIpxfkKbBNfe+wg1e9O3Jj082ldOFU9jkS6D wTu8XFYo+YnbIrK+K4HuK2V0sawOPK9ga0/+6K9TChN20pO/dsphlMpkL1VPc7Vf lK3Mt3eeR9GOCQvIh4gzcPjcJGtlWbjlvCsLsb7oXP9s1CxxcbGfRgYevIj7S2Lw M/gG0oi2BcdRjx9oc+H0OZYGAcWHMUyCJH6JHYzDi9NKl6hfvbJc/eS6f1c6S4ie boDmBuaVp6N2k7jKtW3D49CEWX4XYgx2weuA/b/fjKyFzcPXCJ+Z/N+506KH9ByR D4um8m6IGeeubALSVh9URkKT/YQDpa8+szGMNDJwN5eyr50rTp1ETSmL4O+stFIX 5qLMdDXMLtmiOQ5qbrKsz4ip3SJMTLvnknbfiCN7EHxs7Tmorth7q1PUoCgsAWHn zFaDlhuHvWmCGshRqFYf+iVpPXD+UZHiHztggXFZ3YafQjfG8iwJw7OlvTcMpWGB u5IlWBm1qM+ynQAhy6mK =aD3G -----END PGP SIGNATURE----- Merge tag 'alpine-dt-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/atenart/linux into next/dt Alpine DT changes for 4.12 A bunch of clean up for Alpine device trees, nothing fancy. * tag 'alpine-dt-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/atenart/linux: ARM: dts: alpine: add valid clock-frequency values ARM: dts: alpine: add spaces before the uart node units. ARM: dts: alpine: remove 0x's from the uart1 node unit address ARM: dts: alpine: fix PCIe node name Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
d6d9ac9e48 |
mvebu dt for 4.12 (part 3)
Use label for USB and SATA nodes on Armada 38x -----BEGIN PGP SIGNATURE----- iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWO+kqSMcZ3JlZ29yeS5j bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71V2vAJ47Vu37Pig3 Quq7c68ByWMNhRv0IgCgpJOKmYRrcibw/AbrHIh6ZZUoN7g= =AtGR -----END PGP SIGNATURE----- Merge tag 'mvebu-dt-4.12-3' of git://git.infradead.org/linux-mvebu into next/dt mvebu dt for 4.12 (part 3) Use label for USB and SATA nodes on Armada 38x * tag 'mvebu-dt-4.12-3' of git://git.infradead.org/linux-mvebu: ARM: dts: armada-38x: label USB and SATA nodes Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
5fadb51017 |
Aspeed devicetree updates for 4.12
Updates to the device tree to include upstreamed drivers: - SPI flash controller - Watchdog - ADC In addition we describe some of the clocks so that upstream kernels can boot on hardware. -----BEGIN PGP SIGNATURE----- iQIcBAABCAAGBQJY7ZDwAAoJEGt2WQeBR3CeYSkP/2l1HHYbBkIr7778RkHVbnMj LWVAqg9z/PpwMdv5PLER56FtkczxxVsR0zpKIgeX9aRY5VGZdtxSw4lDWvIj6XWu VQNxQtwT+BzybPKgrACaz5GIct8JxnE/7cdvpVTaFJB+wgNXcIUNwkoXMse+GE94 vWuMNKwJhv5aLpoSfgMpcVIx83ZfAzEj1J1ZQ0IvRAnctypZRhvZKSwlIifJmDId UVAzQN9Vd53jJpwZaWtZcfBRRY/oY+KlxLFqrPO3MfxM6DMv7/88/zRbS47DkDsZ l+wfb5f+OvpUos6UbQWItrJv02a6tkgDZNHzLQ38QRCXn5k/FBDCsYj/v09dInqD NIo+0crqgZBf26vZps729H3HxlIBJgrDtkFiAaSUSbHgChm9eXMiZFJoqdLt/6hs kJsnqLTDHnqYX/cZKq6w9xlKBHoH9lI4lbhV1O8Mr2AFtLNbBkIOQMboQfvpjpgW Dm1KdHZm4tAS/mOBvPwu3lTT/WPPwby7Gno5dkNMtG4HTyf773Q//bC6PsVmO9hd VQjwrdvBVZYGqXJfMw03zhj6eAS23PkyuU99BsK2JETj3f2fxrqCFdc43aH04uMW 371yLBI9l7Et2WC+JMsPm5UW5P6yKwlPdYLRr5xJPM3YjoV2zklf0ACi4rEL7Kxp XFQaJ0nRKyCGx0y6O5Zr =bGNK -----END PGP SIGNATURE----- Merge tag 'aspeed-4.12-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/dt Aspeed devicetree updates for 4.12 Updates to the device tree to include upstreamed drivers: - SPI flash controller - Watchdog - ADC In addition we describe some of the clocks so that upstream kernels can boot on hardware. * tag 'aspeed-4.12-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: arm: dts: aspeed: Describe ADCs for AST2400/AST2500 ARM: dts: aspeed: romulus: Add UART1 ARM: dts: aspeed: Update watchdog compatible strings ARM: dts: aspeed: Add a fastread property ARM: dts: aspeed: Add SPI controller bindings to Romulus ARM: dts: aspeed: Make G4 clocks fixed ARM: dts: aspeed: Make G5 clocks fixed ARM: dts: aspeed: add SPI controller bindings Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
16101f0510 |
Second set of devicetree changes for omaps for v4.12 merge window
to configure various devices: - Enable DCAN on am57xx-idk - Enable CPSW ethernet0 and 1 on am335x-icev2 - Non-critical fix for droid 4 PMIC interrupt triggering - Stop disabling SRAM and GPMC on droid 4 - Configure CPCAP PMIC related devices on droid 4 for ADC, charger and USB PHY. The charger and USB PHY drivers are still being discussed, but the binding for them has been acked by Rob and Sebastian so they should be safe to merge together with the ADC driver in Linux next that they depend on -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAljruX4RHHRvbnlAYXRv bWlkZS5jb20ACgkQG9Q+yVyrpXM16g/8DeQMUItFTVrUBfvlHYAakL3hCJKGJQoU 8vL+4N6oGhPzFje65ifX90GuPidKJDffkExbzBZn5K1JapuuafQDZ75QyxkM2tx2 fESMgKNpXe78K+0GQ3sLESB6DQMQCai6H3XUKjXKi/dcG3NG6J9BQJJXdM2jFLsT OxIDVtHmwAJwx/BclmjCPsAKZVW/3HiqMXoiovXb0aQQXNjBqlmhBQUL+YO8Kxwq VOlGhsxzHPubAEv98VQeTUpZR4G+1JljmDP4UW4H2HHdWMzNvZIyd7Tk/6Tr+ek1 GPr89zm9QqpvzVXvLqwRG27EF9EpYbMbcrUn+02YV6Z0Wrbh6m6Hm0fg3nqGrkdC l4DG0SExzGzi/Vxgfw71JyXcyEabF4gOMMLGcVFcAA/83PaRFB5kFENOW0gMLQ5e 9G6zesj/0ET7m/qMAVcExA+gREXOjCswc3twrYx9vYeS03Ma4Jzg7pzmS+Af+Wcn leNviCjVb4aArBAxvEEId0ajVicftc0by61HviRacm1TUL4Gh0mvyJtN3sjRD+8w dFSFVzGpBs9WQWuf82OVss1c4vLN/0I6sTa3RQT2PNUBAA+4GFFWJxrlDTXH8+tp oN2Ubc9JKt8hPJUY3AeXgC35kqloTUIPJARhIbmjeWKTJ1h/FXHBVEEyp3ut/vuE 7/oCbfeW7k0= =Jna8 -----END PGP SIGNATURE----- Merge tag 'omap-for-v4.12/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Second set of devicetree changes for omaps for v4.12 merge window to configure various devices: - Enable DCAN on am57xx-idk - Enable CPSW ethernet0 and 1 on am335x-icev2 - Non-critical fix for droid 4 PMIC interrupt triggering - Stop disabling SRAM and GPMC on droid 4 - Configure CPCAP PMIC related devices on droid 4 for ADC, charger and USB PHY. The charger and USB PHY drivers are still being discussed, but the binding for them has been acked by Rob and Sebastian so they should be safe to merge together with the ADC driver in Linux next that they depend on * tag 'omap-for-v4.12/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap4-droid4: Add CPCAP PMIC OTG PHY configuration ARM: dts: omap4-droid4: Add CPCAP PMIC battery charger configuration ARM: dts: omap4-droid4: Add CPCAP PMIC ADC configuration ARM: dts: omap4-droid4: Stop disabling SRAM and GPMC ARM: dts: omap4-droid4: Fix interrupt triggering for cpcap ARM: dts: am335x-icev2: Add CPSW ethernet0 and ethernet1 ARM: dts: am57xx-idk: Add DCAN support Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
77f2369789 |
DT for 4.12:
- Add SFRBU on sama5d2 - DT improvements for sama5d2_xplained, sama5d3_xplained, at91sam9x5ek and Axentia TSE-850 -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEl0I5XWmUIrwBfFMm2KKDO9oT4sIFAljwf8cACgkQ2KKDO9oT 4sKN+w//WxdbKG6tOOIeIn/qFbbYDQ7mJhpX9h3ZuHntnp3TXCed8dog8ELIKcPP uQzkKvwOMq+MtGpjEFstCpO3YBD7lvjXD1MmhARSVI5B3mvSp3eeQdI7QgzHJHna 0oQaKtQgNo1LxhkK2guo/C3CzTULaSRzLcofRzjdnAg+xeGZgcd8u3yRQ6phfTgZ XZ8QrzpnOAe9se9/oNzyWcIkXSYJkihDp0/0iOfDWUoERek/B4PFUxxKAemONL9o EencH4249RWLk4lZ/RCSWLiSceCV2YebcwL7GcYNINnt17xkS/MaqTmxEyPSp7cJ aGYQr9bD+BIK+YYRuNN6tUlbTXN27+0z74c19yXWQPjcY5sh1W64Yra9LSJKqaKj RTZQyEvKWYoHAcJ9SRFvEUGZmjnEoIr0SeghW2mcBSnBFUOvfWQkzypiYHDgmvlb UMWXRNwqHTpP0n9ogeUW1Hd6aEdsoU5DeMF2FTEC8UxgJt7QukyfmfnywCdSfzuT 9EHAYo3yutb/lQZosRrV252Q3FS/2SpY+p0jaP01w2UFllQpcDil5DnLt9JaepeK bQeE+orOHfkBCNZFzSZjTA6/mQQzzuAYHKq6LPBdGOk0WphWvU17KPZUllJYu9T1 iAnD/1Uh2yJFXQdDYmXtQIi/R037vaSVVtTxyXWKteTdotpALjc= =VO8s -----END PGP SIGNATURE----- Merge tag 'at91-ab-4.12-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt DT for 4.12: - Add SFRBU on sama5d2 - DT improvements for sama5d2_xplained, sama5d3_xplained, at91sam9x5ek and Axentia TSE-850 * tag 'at91-ab-4.12-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: dts: at91: sama5d3_xplained: not all ADC channels are available ARM: dts: at91: sama5d3_xplained: fix ADC vref ARM: dts: at91: add envelope detector mux to the Axentia TSE-850 ARM: dts: at91: Disable SPI on at91sam9x5ek to allow MCI1 to work. ARM: dts: at91: Fix matrix compatible ARM: dts: at91: sama5d2_xplained: enable RTC wakeup ARM: dts: at91: sama5d2: add sfrbu Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
a43315e3dd |
i.MX device tree updates for 4.12:
- New board support: I2SE's i.MX28 Duckbill-2 boards, Gateworks Ventana
i.MX6 GW5903/GW5904, Zodiac Inflight Innovations RDU2 board, Engicam
i.CoreM6 Quad/Dual OpenFrame modules, Boundary Device i.MX6 Quad Plus
SOM.
- Improve compatible string for i.MX50 eSDHC, i.MX7S SRC devices and
i.MX6SX UART device.
- Add interrupts for switch and PHY devices on VF610 ZII Devel C board.
- Add LVDS, LCD backlight, touchscreen and SAI2 support for i.MX6
icore, geam, and isiot boards.
- A series from Lucas Stach to improve i.MX6Q Plus device tree and add
PRE/PRG devices.
- A series from Stefan Agner to update imx7-colibri device tree
regarding to display, PMIC/regulator support.
- Fix PCI bus DTC warnings seen with the latest compiler.
- Set default phy_type and dr_mode for i.MX25 USBOTG port.
- A couple of small improvements on i.MX25 pin function DT header.
- Add audio support for imx6q-cm-fx6 board using Wolfson wm8731 codec
which is muxed to SSI2 device.
- Other random updates, small fixes and trivial cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJY65XcAAoJEFBXWFqHsHzO0goH/jVVtrnkbfzjEZ+jSU30XY+L
8kR/R+5+PgT3LXZ/U3ZHWqbLOrYtnsmqUjA4loaRwTfyMEPnkRx86XUE86U/xfVy
FuWhFuQ/lLDyfon/CvrEXQ73+CTq8Q5PBqKefg9twi5fNkN2wRqVCD5i4cVgxMpi
KF6DchLv0eW2Zn6fYySf4zNcOIvbkma/qn/Ju2kZEP6TKadIgYvX5Tcw47d2fKsv
E5vypBXdWlNV4SzZyAm4CS9X3pjIQa8zIXHyJAeiqBY/2H7u6z/UvOqnRt0RFnX5
eaVtHF2DwuC9DyjyNVBK1Fhi/7++nnmbLRvBK9G4LBZNmIbcWJEVMHsQcsDQ2h8=
=hpdP
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
i.MX device tree updates for 4.12:
- New board support: I2SE's i.MX28 Duckbill-2 boards, Gateworks Ventana
i.MX6 GW5903/GW5904, Zodiac Inflight Innovations RDU2 board, Engicam
i.CoreM6 Quad/Dual OpenFrame modules, Boundary Device i.MX6 Quad Plus
SOM.
- Improve compatible string for i.MX50 eSDHC, i.MX7S SRC devices and
i.MX6SX UART device.
- Add interrupts for switch and PHY devices on VF610 ZII Devel C board.
- Add LVDS, LCD backlight, touchscreen and SAI2 support for i.MX6
icore, geam, and isiot boards.
- A series from Lucas Stach to improve i.MX6Q Plus device tree and add
PRE/PRG devices.
- A series from Stefan Agner to update imx7-colibri device tree
regarding to display, PMIC/regulator support.
- Fix PCI bus DTC warnings seen with the latest compiler.
- Set default phy_type and dr_mode for i.MX25 USBOTG port.
- A couple of small improvements on i.MX25 pin function DT header.
- Add audio support for imx6q-cm-fx6 board using Wolfson wm8731 codec
which is muxed to SSI2 device.
- Other random updates, small fixes and trivial cleanups.
* tag 'imx-dt-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (56 commits)
ARM: dts: imx6q-utilite-pro: add hpd gpio
ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply
ARM: dts: imx6qdl-sabresd: Set LDO regulator supply
ARM: dts: imx: add Gateworks Ventana GW5903 support
ARM: dts: i.MX25: add AIPS control registers
ARM: dts: imx7-colibri: add Carrier Board 3.3V/5V regulators
ARM: dts: imx7-colibri: remove 1.8V fixed regulator
ARM: dts: imx7-colibri: allow to disable Ethernet rail
ARM: dts: imx7-colibri: fix PMIC voltages
ARM: dts: imx7-colibri: use OF graph to describe the display
ARM: dts: imx6qp-nitrogen6_som2: add Quad Plus variant of the SOM
ARM: dts: imx6q-icore: Add touchscreen node
ARM: dts: vf610-zii-dev-rev-b: change switch2 label
ARM: dts: imx6ul-[geam|isiot]: Add sai2 node
ARM: dts: imx6ul-isiot-common: Add touchscreen node
ARM: dts: imx6ul-isiot: Add i2c nodes
ARM: dts: imx6ul-isiot: Add imx6ul-isiot-common.dtsi
ARM: dts: imx6ul-isiot: Add backlight support for lcdif
ARM: dts: imx6ul-geam: Add backlight support for lcdif
ARM: dts: imx6: add ZII RDU2 boards
...
Signed-off-by: Olof Johansson <olof@lixom.net>
|
||
|
Olof Johansson
|
b633b31406 |
Support for the usb-sata controller on the rock2 and another new rk3288
board, the phyCORE som and its PCM-947 carrier board from Phytec. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAljpQsEQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgSw5CACTf+7cvykZ3aKvtfo76yacC84mSMdLFOQl IPkQBX6cV2CEes8xoKjsHXwvYgpgX6Jz58S86ATfi+h3uMu4l7dld+yMaipTcZp/ ROCtf16r+sjq3kndDGoqSFyq5+YZ2En+mz+86YDdEYS3vZvASp+gSVRkn7NUPlrU +O2Wb8mdY+Hl8XYSZcsmQ7zNjxw/G9pyqVly0/3aSuHRVAbtn4KyunbfkhHdK4LJ NOFji0t+FIXEr8FNBpiRFnIQ19KILzWmrIr5c92Tz+t11R8+wSIwITYpsAomwVqO QWtI1alwusJHY2MwdLXlFtBAW3BwsTt72gasl6AigpvYIP0AxKna =R6eU -----END PGP SIGNATURE----- Merge tag 'v4.12-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Support for the usb-sata controller on the rock2 and another new rk3288 board, the phyCORE som and its PCM-947 carrier board from Phytec. * tag 'v4.12-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Add support for PCM-947 carrier board dt-bindings: Document Phytec phyCORE-RK3288 RDK ARM: dts: rockchip: Add support for phyCORE-RK3288 SoM ARM: dts: rockchip: Enable sata support on rock2 square Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
6daf2aab1c |
Samsung DeviceTree ARM update for v4.12:
1. Enhancements to PCIe nodes on Exynos5440.
2. Fix thermal values on some of Exynos5420 boards like Odroid XU3.
3. Add proper clock frequency properties to DSI nodes.
4. Fix watchdog reset on Exynos4412.
5. Fix watchdog infinite interrupt in soft mode on Exynos4210,
Exynos5440, S3C64xx and S5Pv210.
6. Enable watchdog on Exynos4 and S3C SoCs.
-----BEGIN PGP SIGNATURE-----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=QHlh
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Samsung DeviceTree ARM update for v4.12:
1. Enhancements to PCIe nodes on Exynos5440.
2. Fix thermal values on some of Exynos5420 boards like Odroid XU3.
3. Add proper clock frequency properties to DSI nodes.
4. Fix watchdog reset on Exynos4412.
5. Fix watchdog infinite interrupt in soft mode on Exynos4210,
Exynos5440, S3C64xx and S5Pv210.
6. Enable watchdog on Exynos4 and S3C SoCs.
* tag 'samsung-dt-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: add HDMI controller phandle to exynos4.dtsi
ARM: dts: s5pv210: Fix infinite interrupt in soft mode
ARM: dts: s3c64xx: Fix infinite interrupt in soft mode
ARM: dts: exynos: Fix infinite interrupt in soft mode on Exynos4210 and Exynos5440
ARM: dts: exynos: Enable watchdog on all Exynos4 boards
ARM: dts: s3c64xx: Enable watchdog on all S3C64xx boards
ARM: dts: exynos: Fix watchdog reset on Exynos4412
ARM: dts: exynos: Add the burst and esc clock frequency properties to DSI node
ARM: dts: exynos: Do not ignore real-world fuse values for thermal zone 0 on Exynos5420
ARM: dts: exynos: Add phy-pcie node for pcie to Exynos5440
Signed-off-by: Olof Johansson <olof@lixom.net>
|
||
|
Olof Johansson
|
107193765b |
mvebu dt for 4.12 (part 2)
Use disk-activity trigger for armada-385-linksys Keep dts alphabetically ordered for clearfog (Armada 388) -----BEGIN PGP SIGNATURE----- iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWOgNoSMcZ3JlZ29yeS5j bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71V3cAJ9gBnFQKIkt jDbi9jpxM7vxznt0VgCgnnYcZsFjE7jFAxs+w4KDVd3jYo8= =XQtw -----END PGP SIGNATURE----- Merge tag 'mvebu-dt-4.12-2' of git://git.infradead.org/linux-mvebu into next/dt mvebu dt for 4.12 (part 2) Use disk-activity trigger for armada-385-linksys Keep dts alphabetically ordered for clearfog (Armada 388) * tag 'mvebu-dt-4.12-2' of git://git.infradead.org/linux-mvebu: ARM: dts: armada-385-linksys: disk-activity trigger for all ARM: dts: clearfog: keep dts alphabetically ordered Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
a51ed6cfb2 |
Second Round of Renesas ARM Based SoC DT Updates for v4.12
Corrections: * Correct clock frequency of X2 DU clock input for r8a7791/koelsch board * Correct Z clock for r8a7792 SoC * Correct parent of SSI[0-9] clocks for r8a779[013] SoCs * Correct ethernet clock parent on r7s72100 SoC * Correct DU clock for r8a7794/silk board Cleanups: * Drop _clk suffix from external CAN clock node name on r8a779[01] SoCs Enhancements: * Enable rtc r7s72100/genmai board * Add Z2 clock for r8a7794 SoC * Add DU clock for r8a7794 SoC * Add power-domains to SDHI for r8a7794 and r7s72100 SoCs * Add reset control properties for r8a774[35] SoCs -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJY57Z+AAoJENfPZGlqN0++410QALS78C/4O3vVj3AXABGTnQBc B0cIlfmw1plyx1g0GhZJZYfZ/8bDjdw4yhu7xz0pttWSyfNZpYS7TMf2Uyf6bWtx lMP3N7HYX12y4d/TKmg/w8zNT/P5sBSuAcDwlbRMAKVJer0ztECHmPLawJesF6Vw 2n0VZZpi1A9n4riJukigbiFkRPNjmQAIDB3Rx1afXeyVtUVwImvBb3vJoZHaYJ+T MWaUQ4N+ve22HNm6k8UxJqglDxf9GO5k+SXppPwqUsZlHF41nuR5zWOWxUQl5SCQ G2OQGLcR0iXPcuiFbb3DScuVtwXlm8AgZNOEOGssukC7JkwTFvwHJWMXFBt4ZlPS yDFxTcCqyUtI4NbcsLO3eIEddzG+07V5UwWQw82LXktY2/rYn0I2jgcoAPh6zVou gkA68FaMZSp2WYMfd9EdppyrxaLGbSSi/g3BQnV3HJgYjGqwtb7QSRVM2tmeMEnp RTrAnmTYfRPm04FYyBlwmw7YaDiia5MHp4f45B2mWcXBDlYqepvxDHCyj1lX2ySL /QmVPGrQGSWEgbLhB1kKzSpI90zZBJMzNWE7GaYhb5dXZW2SpjkcpzhHxLtB2BLR xIHIlQ+RHiS0fOPFll3/wfvGDoN1H+P6nh1kz0BJFeQ7ph9iNNVnD9QOaXqePKqL rlbJMygQXSAQ6A8lNrS0 =N8Dk -----END PGP SIGNATURE----- Merge tag 'renesas-dt2-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Second Round of Renesas ARM Based SoC DT Updates for v4.12 Corrections: * Correct clock frequency of X2 DU clock input for r8a7791/koelsch board * Correct Z clock for r8a7792 SoC * Correct parent of SSI[0-9] clocks for r8a779[013] SoCs * Correct ethernet clock parent on r7s72100 SoC * Correct DU clock for r8a7794/silk board Cleanups: * Drop _clk suffix from external CAN clock node name on r8a779[01] SoCs Enhancements: * Enable rtc r7s72100/genmai board * Add Z2 clock for r8a7794 SoC * Add DU clock for r8a7794 SoC * Add power-domains to SDHI for r8a7794 and r7s72100 SoCs * Add reset control properties for r8a774[35] SoCs * tag 'renesas-dt2-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (22 commits) ARM: dts: r8a7791: Drop _clk suffix from external CAN clock node name ARM: dts: r8a7790: Drop _clk suffix from external CAN clock node name ARM: dts: genmai: Enable rtc and rtc_x1 clock ARM: dts: rskrza1: add rtc DT support ARM: dts: rskrza1: set rtc_x1 clock value ARM: dts: r7s72100: add rtc to device tree ARM: dts: r7s72100: add RTC_X clock inputs to device tree ARM: dts: r7s72100: add rtc clock to device tree ARM: dts: koelsch: Correct clock frequency of X2 DU clock input ARM: dts: r8a7794: Add Z2 clock ARM: dts: r8a7792: Correct Z clock ARM: dts: r8a7793: Correct parent of SSI[0-9] clocks ARM: dts: r8a7791: Correct parent of SSI[0-9] clocks ARM: dts: r8a7790: Correct parent of SSI[0-9] clocks ARM: dts: r7s72100: fix ethernet clock parent ARM: dts: silk: Correct clock of DU1 ARM: dts: alt: Correct clock of DU1 ARM: dts: r8a7794: Correct clock of DU1 ARM: dts: r8a7794: Add DU1 clock to device tree ARM: dts: r7s72100: add power-domains to sdhi ... Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
9ef0f50a23 |
Qualcomm Device Tree Changes for v4.12
* Add Coresight components for MSM8974 * Fixup MSM8974 ADSP XO clk and add RPMCC node * Fix typo in APQ8060 * Add SDCs on MSM8660 * Revert MSM8974 USB gadget change due to issues -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJY5tTkAAoJEFKiBbHx2RXVq7AQAMkcalh0NImOfm4uy4alB0ku +3Hr7vkAajQY1MHOqJMdqqSytiycC6TEF8q6ihRuAYK2dWeNARX+FB0Fds+H2ndE IgodHQWqUVKoBa+MTarav6nc9ajb9ToPtbpnhkM36k3eVfGhzLQ2NHd18gpfdEYV RvTA3RZCzHux+anzmJgLcANqEDAfIRjzH4F9hQ1gzPPqiNXTReJYeGXk1eMro76X cx49w0R4jQEgo4pstmYHkJ7wCL0XLz8swNZFlQx1f5qBd010IPW8zeX38rmuRF9M zf54Va57gi8mD+SU+6mGs3OMtgztDDjvtwbef45dweOLxNZYMdh221UJz2/MIt8n mF8Lc4M+SLgy9DbwmOcFtOtYKIZv7/19stH2Yv9/nVMkRYNaQLIgXfK9liTgesj2 65JAFiQGPnA66KLAqJbHeMp3iEAUVeGCigZHNMYq0eYxX0lrQRF+7LYokVtEcJhu L1zbBNJHuuhCdL4eVnheD3j3jab9IdEfEdxG4RlsBuVwT0bIYSslL6mwZIKwnuTS PFbO8t9u/bLyujrbxnqO/aHsGH0AA6yUosb77HHRpkyZZo/nMRtM3eNpaX5n4WAV CSbQzRp2IHTLU+QBCaVQvZc+xi4e0veXG7EkYRi3D/+QH7fG8Ix7jxGNJpsAZtol me85BP13RaJ2dakcRpKj =N6rc -----END PGP SIGNATURE----- Merge tag 'qcom-dts-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt Qualcomm Device Tree Changes for v4.12 * Add Coresight components for MSM8974 * Fixup MSM8974 ADSP XO clk and add RPMCC node * Fix typo in APQ8060 * Add SDCs on MSM8660 * Revert MSM8974 USB gadget change due to issues * tag 'qcom-dts-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: Revert "ARM: dts: qcom: msm8974: Add USB gadget nodes" ARM: dts: qcom: msm8974: Add RPMCC DT node ARM: dts: fix typo on APQ8060 Dragonboard ARM: dts: add SDC2 and SDC4 to the MSM8660 family ARM: dts: msm8974: Hook up adsp-pil's xo clock ARM: dts: qcom: Add msm8974 CoreSight components Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
2149ed8d6f |
Allwinner H5 DT changes for 4.12
H5 patches for 4.12, which are mostly related to reworking the H3 DTSI to be usable on the arm64 H5 DTSI, that shares almost everything with the H3 but the CPU cores. We then have patches to support the H5 boards on top. -----BEGIN PGP SIGNATURE----- iQIcBAABCAAGBQJY5guIAAoJEBx+YmzsjxAgCOAP/izjrX7AD/lxwAQ1BtfIuNcK rSpQ4TjF7hO1r0pN1XoIs538U5uYWiBPhpoL+bxu9cdv33i1jojM6MFMAGfyWES4 bjEHU/dI6zBGeJ/icwSEjP1Wl6N+h6eZwzJ01VQsdc91RZXXqgT2xCVXGIJDtuTw H/+iwvpF6ZqyTFXzhhx8YH7Aqn0X9+nuy6WALyr7d4awa7uLw0QL54Lr3gJWaGvm Si/o8SjZU6pLF3KyDlcOwlDem+YD6ghH+eZXa1323xoctPQRuFZTiinnolhxJWFc w+yhK6PtfR8CJ/WlfEEtMjjYQxeefr6MCQjaPjrY67YwE61PlcOZADAB77DujZ/2 Na47Olqp7vJ1yg19X5W/GlxfWa9P0H0VuRE8ZPMfZXGIHFBTgjHuE+pGds38IDvd Zr0z/fX9WjTUDK9qFD9JHDL9FAJo7gjNGMMMiUvEjR8xpTJhhmAeAzpgZj+Aa78f ZOYzu8J1xYf2yT/Xj/lDz7FHcWJEc89go9fX+lc8ILaFcXYvokqjfGnD6+ODf0FW sO54p1OhjEt8yIEnH2js9C+YCIsuMeZ6e6fHjfp/uVVLPb94fhXKSQGYKRmXPJkK gEdd2OS+I+diM0BAd2mKRlr57mEoPtkl07yx2E2eqCjIG/8wBN0C76KM9p0yPWof YAaV+iAHOdsvT43alrXp =ilmt -----END PGP SIGNATURE----- Merge tag 'sunxi-dt-h5-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64 Allwinner H5 DT changes for 4.12 H5 patches for 4.12, which are mostly related to reworking the H3 DTSI to be usable on the arm64 H5 DTSI, that shares almost everything with the H3 but the CPU cores. We then have patches to support the H5 boards on top. * tag 'sunxi-dt-h5-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: sunxi: h3/h5: switch apb0-related clocks to r_ccu arm64: allwinner: h5: enable USB OTG on Orange Pi PC 2 board arm64: allwinner: h5: add support for the Orange Pi PC 2 board arm64: allwinner: h5: add Allwinner H5 .dtsi ARM: sunxi: h3/h5: add usb_otg and OHCI/EHCI for usbc0 on H3/H5 arm: sun8i: h3: split Allwinner H3 .dtsi arm: sun8i: h3: correct the GIC compatible in H3 to gic-400 arm: sun8i: h3: drop pinctrl-a10.h inclusion for H3 DTSI arm: sun8i: h3: drop skeleton.dtsi inclusion in H3 DTSI Signed-off-by: Olof Johansson <olof@lixom.net> |
||
|
Olof Johansson
|
a9465b581d |
Allwinner H3 DT changes for 4.12
H3 patches for 4.12, which are mostly related to reworking the H3 DTSI to be usable on the arm64 H5 DTSI, that shares almost everything with the H3 but the CPU cores. We also have some new device addition (USB, mostly) that would conflict otherwise. -----BEGIN PGP SIGNATURE----- iQIcBAABCAAGBQJY5gm5AAoJEBx+YmzsjxAg3R0QAISn8cFytu1xYAdVRsIz+xsU 4B1X9XFpGj0W9gWCco+6+LHwRyKSAsnGZ1djGNvvbsPiHIUCOHh7BArPBncRcV+B Whiuzbt0zhAjFdHGK9LiiouxpsvfSC5oa2o4erN19+PSbDUCL+zdz8KHs8Zi/Cn5 sJWY6TZocRprSf4oxrsXFbG6Wt0gtO9/tyrqFs5prY5ZEGxcEAC/0XiMBem7UBx/ dqGkM7kPzd9qNq9YjTikjoeDQh+kJn0aNj8IKmb6ubS+XLcRCNQL2vuPaygr6+RA JBn2QXiBCwwqADmhwboBBuBqDtAQAKOVKxXW6qsb4sw6BQMTCqsRrbvYIOnw0L4v wWfikT8E5zEO0g1163Mo2Tt2OtmfUp5mF1T+xktiz8RWm9XV3bHMXpk2v337ZaBY 5m5gUoHj2GJdl6uinsOBLB0RNM5b0Ijp4OEPKIEALOflBWQgbZSRqpKr8dx9Ik5x FAyP9xle8VMP2cVXwAqVC3IfnnbI25fuW+nOuSmt5a1f49vWVC2X0VAPivGHxgYH hJ+kZnzQJliAP1/xeHfIndvQ86fYykJ3uZMPxJsb5AbZalxNMhqUe1h2OeTwaChU CnNzgfAZA0Yha3le6IdPqjZJsfBOaLflha3Ie6sftymgYyhDXLm/QrUU2Fu4W1yj dfslnt3VEfTHZGSb6F0L =zcf9 -----END PGP SIGNATURE----- Merge tag 'sunxi-dt-h3-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Allwinner H3 DT changes for 4.12 H3 patches for 4.12, which are mostly related to reworking the H3 DTSI to be usable on the arm64 H5 DTSI, that shares almost everything with the H3 but the CPU cores. We also have some new device addition (USB, mostly) that would conflict otherwise. * tag 'sunxi-dt-h3-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: sun8i: h2+: enable USB OTG for Orange Pi Zero board ARM: sun8i: h3: enable USB OTG on Orange Pi One ARM: sunxi: h3/h5: add usb_otg and OHCI/EHCI for usbc0 on H3/H5 arm: sun8i: h3: split Allwinner H3 .dtsi arm: sun8i: h3: correct the GIC compatible in H3 to gic-400 arm: sun8i: h3: drop pinctrl-a10.h inclusion for H3 DTSI arm: sun8i: h3: drop skeleton.dtsi inclusion in H3 DTSI Signed-off-by: Olof Johansson <olof@lixom.net> |