Commit Graph

1030504 Commits

Author SHA1 Message Date
Darrick J. Wong
97f4f9153d xfs: standardize rmap owner number formatting in ftrace output
Always print rmap owner number in hexadecimal and preceded with the unit
"owner".

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2021-08-19 10:07:09 -07:00
Darrick J. Wong
f7b08163b7 xfs: standardize AG block number formatting in ftrace output
Always print allocation group block numbers in hexadecimal and preceded
with the unit "agbno".

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2021-08-19 10:07:09 -07:00
Darrick J. Wong
9febf39dfe xfs: standardize AG number formatting in ftrace output
Always print allocation group numbers in hexadecimal and preceded with
the unit "agno".

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2021-08-19 10:07:09 -07:00
Darrick J. Wong
af6265a008 xfs: standardize inode number formatting in ftrace output
Always print inode numbers in hexadecimal and preceded with the unit
"ino" or "agino", as apropriate.  Fix one tracepoint that used "ino %u"
for an inode btree block count to reduce confusion.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2021-08-19 10:07:08 -07:00
Darrick J. Wong
3fd7cb845b xfs: fix incorrect unit conversion in scrub tracepoint
XFS_DADDR_TO_FSB converts a raw disk address (in units of 512b blocks)
to a raw disk address (in units of fs blocks).  Unfortunately, the
xchk_block_error_class tracepoints incorrectly uses this to decode
xfs_daddr_t into segmented AG number and AG block addresses.  Use the
correct translation code.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2021-08-19 10:07:08 -07:00
Christoph Hellwig
a437b9b488 xfs: remove support for untagged lookups in xfs_icwalk*
With quotaoff not allowing disabling of accounting there is no need
for untagged lookups in this code, so remove the dead leftovers.

Repoted-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
[djwong: convert to for_each_perag_tag]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-18 18:46:02 -07:00
Darrick J. Wong
32816fd792 xfs: constify btree function parameters that are not modified
Constify the rest of the btree functions that take structure and union
pointers and are not supposed to modify them.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-08-18 18:46:02 -07:00
Darrick J. Wong
60e265f7f8 xfs: make the start pointer passed to btree update_lastrec functions const
This btree function is called when updating a record in the rightmost
block of a btree so that we can update the AGF's longest free extent
length field.  Neither parameter is supposed to be updated, so mark them
both const.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-08-18 18:46:02 -07:00
Darrick J. Wong
deb06b9ab6 xfs: make the start pointer passed to btree alloc_block functions const
The @start pointer passed to each per-AG btree type's ->alloc_block
function isn't supposed to be modified, since it's a hint about the
location of the btree block being split that is to be fed to the
allocator, so mark the parameter const.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-08-18 18:46:02 -07:00
Darrick J. Wong
b5a6e5fe0e xfs: make the pointer passed to btree set_root functions const
The pointer passed to each per-AG btree type's ->set_root function isn't
supposed to be modified (that function sets an external pointer to the
root block) so mark them const.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-08-18 18:46:02 -07:00
Darrick J. Wong
22ece4e836 xfs: mark the record passed into xchk_btree functions as const
xchk_btree calls a user-supplied function to validate each btree record
that it finds.  Those functions are not supposed to change the record
data, so mark the parameter const.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-08-18 18:46:01 -07:00
Darrick J. Wong
8e38dc88a6 xfs: make the keys and records passed to btree inorder functions const
The inorder functions are simple predicates, which means that they don't
modify the parameters.  Mark them all const.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-08-18 18:46:01 -07:00
Darrick J. Wong
23825cd148 xfs: mark the record passed into btree init_key functions as const
These functions initialize a key from a record, but they aren't supposed
to modify the record.  Mark it const.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-08-18 18:46:01 -07:00
Darrick J. Wong
159eb69dba xfs: make the record pointer passed to query_range functions const
The query_range functions are supposed to call a caller-supplied
function on each record found in the dataset.  These functions don't
own the memory storing the record, so don't let them change the record.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-08-18 18:46:01 -07:00
Darrick J. Wong
04dcb47482 xfs: make the key parameters to all btree query range functions const
Range query functions are not supposed to modify the query keys that are
being passed in, so mark them all const.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-08-18 18:46:01 -07:00
Darrick J. Wong
d29d557777 xfs: make the key parameters to all btree key comparison functions const
The btree key comparison functions are not allowed to change the keys
that are passed in, so mark them const.  We'll need this for the next
patch, which adds const to the btree range query functions.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-08-18 18:46:00 -07:00
Darrick J. Wong
7f89c83839 xfs: add trace point for fs shutdown
Add a tracepoint for fs shutdowns so we can capture that in ftrace
output.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-08-18 18:46:00 -07:00
Darrick J. Wong
54406764c6 xfs: remove unnecessary agno variable from struct xchk_ag
Now that we always grab an active reference to a perag structure when
dealing with perag metadata, we can remove this unnecessary variable.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-08-18 18:46:00 -07:00
Darrick J. Wong
7e1826e05b xfs: make fsmap backend function key parameters const
There are several GETFSMAP backend functions for XFS to cover the three
devices and various feature support.  Each of these functions are passed
pointers to the low and high keys for the dataset that userspace
requested, and a pointer to scratchpad variables that are used to
control the iteration and fill out records.  The scratchpad data can be
changed arbitrarily, but the keys are supposed to remain unchanged (and
under the control of the outermost loop in xfs_getfsmap).

Unfortunately, the data and rt backends modify the keys that are passed
in from the main control loop, which causes subsequent calls to return
incorrect query results.  Specifically, each of those two functions set
the block number in the high key to the size of their respective device.
Since fsmap results are sorted in device number order, if the lower
numbered device is smaller than the higher numbered device, the first
function will set the high key to the small size, and the key remains
unchanged as it is passed into the function for the higher numbered
device.  The second function will then fail to return all of the results
for the dataset that userspace is asking for because the keyspace is
incorrectly constrained.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
2021-08-18 18:46:00 -07:00
Darrick J. Wong
9ab72f2227 xfs: fix off-by-one error when the last rt extent is in use
The fsmap implementation for realtime devices uses the gap between
info->next_daddr and a free rtextent reported by xfs_rtalloc_query_range
to feed userspace fsmap records with an "unknown" owner.  We use this
trick to report to userspace when the last rtextent in the filesystem is
in use by synthesizing a null rmap record starting at the next block
after the query range.

Unfortunately, there's a minor accounting bug in the way that we
construct the null rmap record.  Originally, ahigh.ar_startext contains
the last rtextent for which the user wants records.  It's entirely
possible that number is beyond the end of the rt volume, so the location
synthesized rmap record /must/ be constrained to the minimum of the high
key and the number of extents in the rt volume.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
2021-08-18 18:46:00 -07:00
Darrick J. Wong
c02f652986 xfs: make xfs_rtalloc_query_range input parameters const
In commit 8ad560d256, we changed xfs_rtalloc_query_range to constrain
the range of bits in the realtime bitmap file that would actually be
searched.  In commit a3a374bf18, we changed the range again
(incorrectly), leading to the fix in commit d88850bd55, which finally
corrected the range check code.  Unfortunately, the author never noticed
that the function modifies its input parameters, which is a totaly no-no
since none of the other range query functions change their input
parameters.

So, fix this function yet again to stash the upper end of the query
range (i.e. the high key) in a local variable and hope this is the last
time I have to fix my own function.  While we're at it, mark the key
inputs const so nobody makes this mistake again. :(

Fixes: 8ad560d256 ("xfs: strengthen rtalloc query range checks")
Not-fixed-by: a3a374bf18 ("xfs: fix off-by-one error in xfs_rtalloc_query_range")
Not-fixed-by: d88850bd55 ("xfs: fix high key handling in the rt allocator's query_range function")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
2021-08-18 18:46:00 -07:00
Dave Chinner
21b4ee7029 xfs: drop ->writepage completely
->writepage is only used in one place - single page writeback from
memory reclaim. We only allow such writeback from kswapd, not from
direct memory reclaim, and so it is rarely used. When it comes from
kswapd, it is effectively random dirty page shoot-down, which is
horrible for IO patterns. We will already have background writeback
trying to clean all the dirty pages in memory as efficiently as
possible, so having kswapd interrupt our well formed IO stream only
slows things down. So get rid of xfs_vm_writepage() completely.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
[djwong: forward port to 5.15]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-18 18:45:59 -07:00
Dave Chinner
33c0dd7898 xfs: move the CIL workqueue to the CIL
We only use the CIL workqueue in the CIL, so it makes no sense to
hang it off the xfs_mount and have to walk multiple pointers back up
to the mount when we have the CIL structures right there.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 12:09:30 -07:00
Dave Chinner
39823d0fac xfs: CIL work is serialised, not pipelined
Because we use a single work structure attached to the CIL rather
than the CIL context, we can only queue a single work item at a
time. This results in the CIL being single threaded and limits
performance when it becomes CPU bound.

The design of the CIL is that it is pipelined and multiple commits
can be running concurrently, but the way the work is currently
implemented means that it is not pipelining as it was intended. The
critical work to switch the CIL context can take a few milliseconds
to run, but the rest of the CIL context flush can take hundreds of
milliseconds to complete. The context switching is the serialisation
point of the CIL, once the context has been switched the rest of the
context push can run asynchrnously with all other context pushes.

Hence we can move the work to the CIL context so that we can run
multiple CIL pushes at the same time and spread the majority of
the work out over multiple CPUs. We can keep the per-cpu CIL commit
state on the CIL rather than the context, because the context is
pinned to the CIL until the switch is done and we aggregate and
drain the per-cpu state held on the CIL during the context switch.

However, because we no longer serialise the CIL work, we can have
effectively unlimited CIL pushes in progress. We don't want to do
this - not only does it create contention on the iclogs and the
state machine locks, we can run the log right out of space with
outstanding pushes. Instead, limit the work concurrency to 4
concurrent works being processed at a time. This is enough
concurrency to remove the CIL from being a CPU bound bottleneck but
not enough to create new contention points or unbound concurrency
issues.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 12:09:30 -07:00
Dave Chinner
0020a190cf xfs: AIL needs asynchronous CIL forcing
The AIL pushing is stalling on log forces when it comes across
pinned items. This is happening on removal workloads where the AIL
is dominated by stale items that are removed from AIL when the
checkpoint that marks the items stale is committed to the journal.
This results is relatively few items in the AIL, but those that are
are often pinned as directories items are being removed from are
still being logged.

As a result, many push cycles through the CIL will first issue a
blocking log force to unpin the items. This can take some time to
complete, with tracing regularly showing push delays of half a
second and sometimes up into the range of several seconds. Sequences
like this aren't uncommon:

....
 399.829437:  xfsaild: last lsn 0x11002dd000 count 101 stuck 101 flushing 0 tout 20
<wanted 20ms, got 270ms delay>
 400.099622:  xfsaild: target 0x11002f3600, prev 0x11002f3600, last lsn 0x0
 400.099623:  xfsaild: first lsn 0x11002f3600
 400.099679:  xfsaild: last lsn 0x1100305000 count 16 stuck 11 flushing 0 tout 50
<wanted 50ms, got 500ms delay>
 400.589348:  xfsaild: target 0x110032e600, prev 0x11002f3600, last lsn 0x0
 400.589349:  xfsaild: first lsn 0x1100305000
 400.589595:  xfsaild: last lsn 0x110032e600 count 156 stuck 101 flushing 30 tout 50
<wanted 50ms, got 460ms delay>
 400.950341:  xfsaild: target 0x1100353000, prev 0x110032e600, last lsn 0x0
 400.950343:  xfsaild: first lsn 0x1100317c00
 400.950436:  xfsaild: last lsn 0x110033d200 count 105 stuck 101 flushing 0 tout 20
<wanted 20ms, got 200ms delay>
 401.142333:  xfsaild: target 0x1100361600, prev 0x1100353000, last lsn 0x0
 401.142334:  xfsaild: first lsn 0x110032e600
 401.142535:  xfsaild: last lsn 0x1100353000 count 122 stuck 101 flushing 8 tout 10
<wanted 10ms, got 10ms delay>
 401.154323:  xfsaild: target 0x1100361600, prev 0x1100361600, last lsn 0x1100353000
 401.154328:  xfsaild: first lsn 0x1100353000
 401.154389:  xfsaild: last lsn 0x1100353000 count 101 stuck 101 flushing 0 tout 20
<wanted 20ms, got 300ms delay>
 401.451525:  xfsaild: target 0x1100361600, prev 0x1100361600, last lsn 0x0
 401.451526:  xfsaild: first lsn 0x1100353000
 401.451804:  xfsaild: last lsn 0x1100377200 count 170 stuck 22 flushing 122 tout 50
<wanted 50ms, got 500ms delay>
 401.933581:  xfsaild: target 0x1100361600, prev 0x1100361600, last lsn 0x0
....

In each of these cases, every AIL pass saw 101 log items stuck on
the AIL (pinned) with very few other items being found. Each pass, a
log force was issued, and delay between last/first is the sleep time
+ the sync log force time.

Some of these 101 items pinned the tail of the log. The tail of the
log does slowly creep forward (first lsn), but the problem is that
the log is actually out of reservation space because it's been
running so many transactions that stale items that never reach the
AIL but consume log space. Hence we have a largely empty AIL, with
long term pins on items that pin the tail of the log that don't get
pushed frequently enough to keep log space available.

The problem is the hundreds of milliseconds that we block in the log
force pushing the CIL out to disk. The AIL should not be stalled
like this - it needs to run and flush items that are at the tail of
the log with minimal latency. What we really need to do is trigger a
log flush, but then not wait for it at all - we've already done our
waiting for stuff to complete when we backed off prior to the log
force being issued.

Even if we remove the XFS_LOG_SYNC from the xfs_log_force() call, we
still do a blocking flush of the CIL and that is what is causing the
issue. Hence we need a new interface for the CIL to trigger an
immediate background push of the CIL to get it moving faster but not
to wait on that to occur. While the CIL is pushing, the AIL can also
be pushing.

We already have an internal interface to do this -
xlog_cil_push_now() - but we need a wrapper for it to be used
externally. xlog_cil_force_seq() can easily be extended to do what
we need as it already implements the synchronous CIL push via
xlog_cil_push_now(). Add the necessary flags and "push current
sequence" semantics to xlog_cil_force_seq() and convert the AIL
pushing to use it.

One of the complexities here is that the CIL push does not guarantee
that the commit record for the CIL checkpoint is written to disk.
The current log force ensures this by submitting the current ACTIVE
iclog that the commit record was written to. We need the CIL to
actually write this commit record to disk for an async push to
ensure that the checkpoint actually makes it to disk and unpins the
pinned items in the checkpoint on completion. Hence we need to pass
down to the CIL push that we are doing an async flush so that it can
switch out the commit_iclog if necessary to get written to disk when
the commit iclog is finally released.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 12:09:30 -07:00
Dave Chinner
68a74dcae6 xfs: order CIL checkpoint start records
Because log recovery depends on strictly ordered start records as
well as strictly ordered commit records.

This is a zero day bug in the way XFS writes pipelined transactions
to the journal which is exposed by fixing the zero day bug that
prevents the CIL from pipelining checkpoints. This re-introduces
explicit concurrent commits back into the on-disk journal and hence
out of order start records.

The XFS journal commit code has never ordered start records and we
have relied on strict commit record ordering for correct recovery
ordering of concurrently written transactions. Unfortunately, root
cause analysis uncovered the fact that log recovery uses the LSN of
the start record for transaction commit processing. Hence, whilst
the commits are processed in strict order by recovery, the LSNs
associated with the commits can be out of order and so recovery may
stamp incorrect LSNs into objects and/or misorder intents in the AIL
for later processing. This can result in log recovery failures
and/or on disk corruption, sometimes silent.

Because this is a long standing log recovery issue, we can't just
fix log recovery and call it good. This still leaves older kernels
susceptible to recovery failures and corruption when replaying a log
from a kernel that pipelines checkpoints. There is also the issue
that in-memory ordering for AIL pushing and data integrity
operations are based on checkpoint start LSNs, and if the start LSN
is incorrect in the journal, it is also incorrect in memory.

Hence there's really only one choice for fixing this zero-day bug:
we need to strictly order checkpoint start records in ascending
sequence order in the log, the same way we already strictly order
commit records.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 12:09:30 -07:00
Dave Chinner
caa80090d1 xfs: attach iclog callbacks in xlog_cil_set_ctx_write_state()
Now that we have a mechanism to guarantee that the callbacks
attached to an iclog are owned by the context that attaches them
until they drop their reference to the iclog via
xlog_state_release_iclog(), we can attach callbacks to the iclog at
any time we have an active reference to the iclog.

xlog_state_get_iclog_space() always guarantees that the commit
record will fit in the iclog it returns, so we can move this IO
callback setting to xlog_cil_set_ctx_write_state(), record the
commit iclog in the context and remove the need for the commit iclog
to be returned by xlog_write() altogether.

This, in turn, allows us to move the wakeup for ordered commit
record writes up into xlog_cil_set_ctx_write_state(), too, because
we have been guaranteed that this commit record will be physically
located in the iclog before any waiting commit record at a higher
sequence number will be granted iclog space.

This further cleans up the post commit record write processing in
the CIL push code, especially as xlog_state_release_iclog() will now
clean up the context when shutdown errors occur.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 12:09:30 -07:00
Dave Chinner
bf034bc827 xfs: factor out log write ordering from xlog_cil_push_work()
So we can use it for start record ordering as well as commit record
ordering in future.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 12:09:29 -07:00
Dave Chinner
c45aba40cf xfs: pass a CIL context to xlog_write()
Pass the CIL context to xlog_write() rather than a pointer to a LSN
variable. Only the CIL checkpoint calls to xlog_write() need to know
about the start LSN of the writes, so rework xlog_write to directly
write the LSNs into the CIL context structure.

This removes the commit_lsn variable from xlog_cil_push_work(), so
now we only have to issue the commit record ordering wakeup from
there.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 12:09:29 -07:00
Dave Chinner
2ce82b722d xfs: move xlog_commit_record to xfs_log_cil.c
It is only used by the CIL checkpoints, and is the counterpart to
start record formatting and writing that is already local to
xfs_log_cil.c.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 12:09:29 -07:00
Dave Chinner
2562c32240 xfs: log head and tail aren't reliable during shutdown
I'm seeing assert failures from xlog_space_left() after a shutdown
has begun that look like:

XFS (dm-0): log I/O error -5
XFS (dm-0): xfs_do_force_shutdown(0x2) called from line 1338 of file fs/xfs/xfs_log.c. Return address = xlog_ioend_work+0x64/0xc0
XFS (dm-0): Log I/O Error Detected.
XFS (dm-0): Shutting down filesystem. Please unmount the filesystem and rectify the problem(s)
XFS (dm-0): xlog_space_left: head behind tail
XFS (dm-0):   tail_cycle = 6, tail_bytes = 2706944
XFS (dm-0):   GH   cycle = 6, GH   bytes = 1633867
XFS: Assertion failed: 0, file: fs/xfs/xfs_log.c, line: 1310
------------[ cut here ]------------
Call Trace:
 xlog_space_left+0xc3/0x110
 xlog_grant_push_threshold+0x3f/0xf0
 xlog_grant_push_ail+0x12/0x40
 xfs_log_reserve+0xd2/0x270
 ? __might_sleep+0x4b/0x80
 xfs_trans_reserve+0x18b/0x260
.....

There are two things here. Firstly, after a shutdown, the log head
and tail can be out of whack as things abort and release (or don't
release) resources, so checking them for sanity doesn't make much
sense. Secondly, xfs_log_reserve() can race with shutdown and so it
can still fail like this even though it has already checked for a
log shutdown before calling xlog_grant_push_ail().

So, before ASSERT failing in xlog_space_left(), make sure we haven't
already shut down....

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 12:09:29 -07:00
Dave Chinner
502a01fac0 xfs: don't run shutdown callbacks on active iclogs
When the log is shutdown, it currently walks all the iclogs and runs
callbacks that are attached to the iclogs, regardless of whether the
iclog is queued for IO completion or not. This creates a problem for
contexts attaching callbacks to iclogs in that a racing shutdown can
run the callbacks even before the attaching context has finished
processing the iclog and releasing it for IO submission.

If the callback processing of the iclog frees the structure that is
attached to the iclog, then this leads to an UAF scenario that can
only be protected against by holding the icloglock from the point
callbacks are attached through to the release of the iclog. While we
currently do this, it is not practical or sustainable.

Hence we need to make shutdown processing the responsibility of the
context that holds active references to the iclog. We know that the
contexts attaching callbacks to the iclog must have active
references to the iclog, and that means they must be in either
ACTIVE or WANT_SYNC states. xlog_state_do_callback() will skip over
iclogs in these states -except- when the log is shut down.

xlog_state_do_callback() checks the state of the iclogs while
holding the icloglock, therefore the reference count/state change
that occurs in xlog_state_release_iclog() after the callbacks are
atomic w.r.t. shutdown processing.

We can't push the responsibility of callback cleanup onto the CIL
context because we can have ACTIVE iclogs that have callbacks
attached that have already been released. Hence we really need to
internalise the cleanup of callbacks into xlog_state_release_iclog()
processing.

Indeed, we already have that internalisation via:

xlog_state_release_iclog
  drop last reference
    ->SYNCING
  xlog_sync
    xlog_write_iclog
      if (log_is_shutdown)
        xlog_state_done_syncing()
	  xlog_state_do_callback()
	    <process shutdown on iclog that is now in SYNCING state>

The problem is that xlog_state_release_iclog() aborts before doing
anything if the log is already shut down. It assumes that the
callbacks have already been cleaned up, and it doesn't need to do
any cleanup.

Hence the fix is to remove the xlog_is_shutdown() check from
xlog_state_release_iclog() so that reference counts are correctly
released from the iclogs, and when the reference count is zero we
always transition to SYNCING if the log is shut down. Hence we'll
always enter the xlog_sync() path in a shutdown and eventually end
up erroring out the iclog IO and running xlog_state_do_callback() to
process the callbacks attached to the iclog.

This allows us to stop processing referenced ACTIVE/WANT_SYNC iclogs
directly in the shutdown code, and in doing so gets rid of the UAF
vector that currently exists. This then decouples the adding of
callbacks to the iclogs from xlog_state_release_iclog() as we
guarantee that xlog_state_release_iclog() will process the callbacks
if the log has been shut down before xlog_state_release_iclog() has
been called.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 12:09:29 -07:00
Dave Chinner
aad7272a92 xfs: separate out log shutdown callback processing
The iclog callback processing done during a forced log shutdown has
different logic to normal runtime IO completion callback processing.
Separate out the shutdown callbacks into their own function and call
that from the shutdown code instead.

We don't need this shutdown specific logic in the normal runtime
completion code - we'll always run the shutdown version on shutdown,
and it will do what shutdown needs regardless of whether there are
racing IO completion callbacks scheduled or in progress. Hence we
can also simplify the normal IO completion callpath and only abort
if shutdown occurred while we actively were processing callbacks.

Further, separating out the IO completion logic from the shutdown
logic avoids callback race conditions from being triggered by log IO
completion after a shutdown. IO completion will now only run
callbacks on iclogs that are in the correct state for a callback to
be run, avoiding the possibility of running callbacks on a
referenced iclog that hasn't yet been submitted for IO.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 12:09:28 -07:00
Dave Chinner
8bb92005b0 xfs: rework xlog_state_do_callback()
Clean it up a bit by factoring and rearranging some of the code.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 12:09:28 -07:00
Dave Chinner
b36d4651e1 xfs: make forced shutdown processing atomic
The running of a forced shutdown is a bit of a mess. It does racy
checks for XFS_MOUNT_SHUTDOWN in xfs_do_force_shutdown(), then
does more racy checks in xfs_log_force_unmount() before finally
setting XFS_MOUNT_SHUTDOWN and XLOG_IO_ERROR under the
log->icloglock.

Move the checking and setting of XFS_MOUNT_SHUTDOWN into
xfs_do_force_shutdown() so we only process a shutdown once and once
only. Serialise this with the mp->m_sb_lock spinlock so that the
state change is atomic and won't race. Move all the mount specific
shutdown state changes from xfs_log_force_unmount() to
xfs_do_force_shutdown() so they are done atomically with setting
XFS_MOUNT_SHUTDOWN.

Then get rid of the racy xlog_is_shutdown() check from
xlog_force_shutdown(), and gate the log shutdown on the
test_and_set_bit(XLOG_IO_ERROR) test under the icloglock. This
means that the log is shutdown once and once only, and code that
needs to prevent races with shutdown can do so by holding the
icloglock and checking the return value of xlog_is_shutdown().

This results in a predictable shutdown execution process - we set the
shutdown flags once and process the shutdown once rather than the
current "as many concurrent shutdowns as can race to the flag
setting" situation we have now.

Also, now that shutdown is atomic, alway emit a stack trace when the
error level for the filesystem is high enough. This means that we
always get a stack trace when trying to diagnose the cause of
shutdowns in the field, rather than just for SHUTDOWN_CORRUPT_INCORE
cases.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 12:09:28 -07:00
Dave Chinner
e1d06e5f66 xfs: convert log flags to an operational state field
log->l_flags doesn't actually contain "flags" as such, it contains
operational state information that can change at runtime. For the
shutdown state, this at least should be an atomic bit because
it is read without holding locks in many places and so using atomic
bitops for the state field modifications makes sense.

This allows us to use things like test_and_set_bit() on state
changes (e.g. setting XLOG_TAIL_WARN) to avoid races in setting the
state when we aren't holding locks.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 12:09:28 -07:00
Dave Chinner
fd67d8a072 xfs: move recovery needed state updates to xfs_log_mount_finish
xfs_log_mount_finish() needs to know if recovery is needed or not to
make decisions on whether to flush the log and AIL.  Move the
handling of the NEED_RECOVERY state out to this function rather than
needing a temporary variable to store this state over the call to
xlog_recover_finish().

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 12:09:28 -07:00
Dave Chinner
5112e2067b xfs: XLOG_STATE_IOERROR must die
We don't need an iclog state field to tell us the log has been shut
down. We can just check the xlog_is_shutdown() instead. The avoids
the need to have shutdown overwrite the current iclog state while
being active used by the log code and so having to ensure that every
iclog state check handles XLOG_STATE_IOERROR appropriately.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 12:09:27 -07:00
Dave Chinner
2039a27230 xfs: convert XLOG_FORCED_SHUTDOWN() to xlog_is_shutdown()
Make it less shouty and a static inline before adding more calls
through the log code.

Also convert internal log code that uses XFS_FORCED_SHUTDOWN(mount)
to use xlog_is_shutdown(log) as well.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-16 12:09:27 -07:00
Dwaipayan Ray
edf27485eb xfs: cleanup __FUNCTION__ usage
__FUNCTION__ exists only for backwards compatibility reasons
with old gcc versions. Replace it with __func__.

Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-11 09:13:12 -07:00
Allison Henderson
5e68b4c7fb xfs: Rename __xfs_attr_rmtval_remove
Now that xfs_attr_rmtval_remove is gone, rename __xfs_attr_rmtval_remove
to xfs_attr_rmtval_remove

Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-11 09:12:45 -07:00
Allison Henderson
df0826312a xfs: add attr state machine tracepoints
This is a quick patch to add a new xfs_attr_*_return tracepoints.  We
use these to track when ever a new state is set or -EAGAIN is returned

Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-09 16:16:40 -07:00
Darrick J. Wong
4bc619833f xfs: refactor xfs_iget calls from log intent recovery
Hoist the code from xfs_bui_item_recover that igets an inode and marks
it as being part of log intent recovery.  The next patch will want a
common function.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
2021-08-09 15:57:59 -07:00
Darrick J. Wong
2b73a2c817 xfs: clear log incompat feature bits when the log is idle
When there are no ongoing transactions and the log contents have been
checkpointed back into the filesystem, the log performs 'covering',
which is to say that it log a dummy transaction to record the fact that
the tail has caught up with the head.  This is a good time to clear log
incompat feature flags, because they are flags that are temporarily set
to limit the range of kernels that can replay a dirty log.

Since it's possible that some other higher level thread is about to
start logging items protected by a log incompat flag, we create a rwsem
so that upper level threads can coordinate this with the log.  It would
probably be more performant to use a percpu rwsem, but the ability to
/try/ taking the write lock during covering is critical, and percpu
rwsems do not provide that.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
2021-08-09 15:57:59 -07:00
Darrick J. Wong
908ce71e54 xfs: allow setting and clearing of log incompat feature flags
Log incompat feature flags in the superblock exist for one purpose: to
protect the contents of a dirty log from replay on a kernel that isn't
prepared to handle those dirty contents.  This means that they can be
cleared if (a) we know the log is clean and (b) we know that there
aren't any other threads in the system that might be setting or relying
upon a log incompat flag.

Therefore, clear the log incompat flags when we've finished recovering
the log, when we're unmounting cleanly, remounting read-only, or
freezing; and provide a function so that subsequent patches can start
using this.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
2021-08-09 15:57:59 -07:00
Dave Chinner
d634525db6 xfs: replace kmem_alloc_large() with kvmalloc()
There is no reason for this wrapper existing anymore. All the places
that use KM_NOFS allocation are within transaction contexts and
hence covered by memalloc_nofs_save/restore contexts. Hence we don't
need any special handling of vmalloc for large IOs anymore and
so special casing this code isn't necessary.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-09 15:57:43 -07:00
Dave Chinner
98fe2c3cef xfs: remove kmem_alloc_io()
Since commit 59bb47985c ("mm, sl[aou]b: guarantee natural alignment
for kmalloc(power-of-two)"), the core slab code now guarantees slab
alignment in all situations sufficient for IO purposes (i.e. minimum
of 512 byte alignment of >= 512 byte sized heap allocations) we no
longer need the workaround in the XFS code to provide this
guarantee.

Replace the use of kmem_alloc_io() with kmem_alloc() or
kmem_alloc_large() appropriately, and remove the kmem_alloc_io()
interface altogether.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-09 15:57:43 -07:00
Dave Chinner
de2860f463 mm: Add kvrealloc()
During log recovery of an XFS filesystem with 64kB directory
buffers, rebuilding a buffer split across two log records results
in a memory allocation warning from krealloc like this:

xfs filesystem being mounted at /mnt/scratch supports timestamps until 2038 (0x7fffffff)
XFS (dm-0): Unmounting Filesystem
XFS (dm-0): Mounting V5 Filesystem
XFS (dm-0): Starting recovery (logdev: internal)
------------[ cut here ]------------
WARNING: CPU: 5 PID: 3435170 at mm/page_alloc.c:3539 get_page_from_freelist+0xdee/0xe40
.....
RIP: 0010:get_page_from_freelist+0xdee/0xe40
Call Trace:
 ? complete+0x3f/0x50
 __alloc_pages+0x16f/0x300
 alloc_pages+0x87/0x110
 kmalloc_order+0x2c/0x90
 kmalloc_order_trace+0x1d/0x90
 __kmalloc_track_caller+0x215/0x270
 ? xlog_recover_add_to_cont_trans+0x63/0x1f0
 krealloc+0x54/0xb0
 xlog_recover_add_to_cont_trans+0x63/0x1f0
 xlog_recovery_process_trans+0xc1/0xd0
 xlog_recover_process_ophdr+0x86/0x130
 xlog_recover_process_data+0x9f/0x160
 xlog_recover_process+0xa2/0x120
 xlog_do_recovery_pass+0x40b/0x7d0
 ? __irq_work_queue_local+0x4f/0x60
 ? irq_work_queue+0x3a/0x50
 xlog_do_log_recovery+0x70/0x150
 xlog_do_recover+0x38/0x1d0
 xlog_recover+0xd8/0x170
 xfs_log_mount+0x181/0x300
 xfs_mountfs+0x4a1/0x9b0
 xfs_fs_fill_super+0x3c0/0x7b0
 get_tree_bdev+0x171/0x270
 ? suffix_kstrtoint.constprop.0+0xf0/0xf0
 xfs_fs_get_tree+0x15/0x20
 vfs_get_tree+0x24/0xc0
 path_mount+0x2f5/0xaf0
 __x64_sys_mount+0x108/0x140
 do_syscall_64+0x3a/0x70
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Essentially, we are taking a multi-order allocation from kmem_alloc()
(which has an open coded no fail, no warn loop) and then
reallocating it out to 64kB using krealloc(__GFP_NOFAIL) and that is
then triggering the above warning.

This is a regression caused by converting this code from an open
coded no fail/no warn reallocation loop to using __GFP_NOFAIL.

What we actually need here is kvrealloc(), so that if contiguous
page allocation fails we fall back to vmalloc() and we don't
get nasty warnings happening in XFS.

Fixes: 771915c4f6 ("xfs: remove kmem_realloc()")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-09 15:57:43 -07:00
Darrick J. Wong
43059d5416 xfs: dump log intent items that cannot be recovered due to corruption
If we try to recover a log intent item and the operation fails due to
filesystem corruption, dump the contents of the item to the log for
further analysis.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-08-09 11:13:17 -07:00
Darrick J. Wong
48c6615cc5 xfs: grab active perag ref when reading AG headers
This patch prepares scrub to deal with the possibility of tearing down
entire AGs by changing the order of resource acquisition to match the
rest of the XFS codebase.  In other words, scrub now grabs AG resources
in order of: perag structure, then AGI/AGF/AGFL buffers, then btree
cursors; and releases them in reverse order.

This requires us to distinguish xchk_ag_init callers -- some are
responding to a user request to check AG metadata, in which case we can
return ENOENT to userspace; but other callers have an ondisk reference
to an AG that they're trying to cross-reference.  In this second case,
the lack of an AG means there's ondisk corruption, since ondisk metadata
cannot point into nonexistent space.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
2021-08-09 11:13:17 -07:00