native_usergs_sysret64 is described as
extern void native_usergs_sysret64(void)
so lets add ENDPROC here
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: heukelum@fastmail.fm
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
NEXT_PAGE already has 'balign' so no
need to keep this redundant one.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: heukelum@fastmail.fm
Signed-off-by: Ingo Molnar <mingo@elte.hu>
While the introduction of __copy_from_user_nocache (see commit:
0812a579c9) may have been an improvement
for sufficiently large writes, there is evidence to show that it is
deterimental for small writes. Unixbench's fstime test gives the
following results for 256 byte writes with MAX_BLOCK of 2000:
2.6.29-rc6 ( 5 samples, each in KB/sec ):
283750, 295200, 294500, 293000, 293300
2.6.29-rc6 + this patch (5 samples, each in KB/sec):
313050, 3106750, 293350, 306300, 307900
2.6.18
395700, 342000, 399100, 366050, 359850
See w_test() in src/fstime.c in unixbench version 4.1.0. Basically, the above test
consists of counting how much we can write in this manner:
alarm(10);
while (!sigalarm) {
for (f_blocks = 0; f_blocks < 2000; ++f_blocks) {
write(f, buf, 256);
}
lseek(f, 0L, 0);
}
Note, there are other components to the write syscall regression
that are not addressed here.
Signed-off-by: Salman Qazi <sqazi@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: extend prefetch handling on 64-bit
Currently there's an extra is_prefetch() check done in do_sigbus(),
which we only do on 32 bits.
This is a last-ditch check before we terminate a task, so it's worth
giving prefetch instructions another chance - should none of our
existing quirks have caught a prefetch instruction related spurious
fault.
The only risk is if a prefetch causes a real sigbus, in that case
we'll not OOM but try another fault. But this code has been on
32-bit for a long time, so it should be fine in practice.
So do this on 64-bit too - and thus remove one more #ifdef.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Removal of an #ifdef in fault_in_kernel_space(), by making
use of the new TASK_SIZE_MAX symbol which is now available
on 32-bit too.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Rename TASK_SIZE64 to TASK_SIZE_MAX, and provide the
define on 32-bit too. (mapped to TASK_SIZE)
This allows 32-bit code to make use of the (former-) TASK_SIZE64
symbol as well, in a clean way.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
do_page_fault() has this ugly #ifdef in its prototype:
#ifdef CONFIG_X86_64
asmlinkage
#endif
void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
Replace it with 'dotraplinkage' which maps to exactly the above
construct: nothing on 32-bit and asmlinkage on 64-bit.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: add oops-recursion check to 32-bit
Unify the oops state-machine, to the 64-bit version. It is
slightly more careful in that it does a recursion check
in oops_begin(), and is thus more likely to show the relevant
oops.
It also means that 32-bit will print one more line at the
end of pagefault triggered oopses:
printk(KERN_EMERG "CR2: %016lx\n", address);
Which is generally good information to be seen in partial-dump
digital-camera jpegs ;-)
The downside is the somewhat more complex critical path. Both
variants have been tested well meanwhile by kernel developers
crashing their boxes so i dont think this is a practical worry.
This removes 3 ugly #ifdefs from no_context() and makes the
function a lot nicer read.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: refine/extend page fault related oops printing on 64-bit
- honor the pause_on_oops logic on 64-bit too
- print out NX fault warnings on 64-bit as well
- factor out the NX fault message to make it git-greppable and readable
Note that this means that we do the PF_INSTR check on 32-bit non-PAE
as well where it should not occur ... normally. Cannot hurt.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Remove an #ifdef from notify_page_fault(). The function still
compiles to nothing in the !CONFIG_KPROBES case.
Introduce kprobes_built_in() and kprobe_fault_handler() helpers
to allow this - they returns 0 if !CONFIG_KPROBES.
No code changed:
text data bss dec hex filename
4618 32 24 4674 1242 fault.o.before
4618 32 24 4674 1242 fault.o.after
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Remove an #ifdef from kmmio_fault() - we can do this by
providing default implementations for is_kmmio_active()
and kmmio_handler(). The compiler optimizes it all away
in the !CONFIG_MMIOTRACE case.
Also, while at it, clean up mmiotrace.h a bit:
- standard header guards
- standard vertical spaces for structure definitions
No code changed (both with mmiotrace on and off in the config):
text data bss dec hex filename
2947 12 12 2971 b9b fault.o.before
2947 12 12 2971 b9b fault.o.after
Cc: Pekka Paalanen <pq@iki.fi>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: improve page fault handling robustness
The 'PF_RSVD' flag (bit 3) of the page-fault error_code is a
relatively recent addition to x86 CPUs, so the 32-bit do_fault()
implementation never had it. This flag gets set when the CPU
detects nonzero values in any reserved bits of the page directory
entries.
Extend the existing 64-bit check for PF_RSVD in do_page_fault()
to 32-bit too. If we detect such a fault then we print a more
informative oops and the pagetables.
This unifies the code some more, removes an ugly #ifdef and improves
the 32-bit page fault code robustness a bit. It slightly increases
the 32-bit kernel text size.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
Instead of an ugly, open-coded, #ifdef-ed vm86 related legacy check
in do_page_fault(), put it into the check_v8086_mode() helper
function and merge it with an existing #ifdef.
Also, simplify the code flow a tiny bit in the helper.
No code changed:
arch/x86/mm/fault.o:
text data bss dec hex filename
2711 12 12 2735 aaf fault.o.before
2711 12 12 2735 aaf fault.o.after
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: no functionality changed
Factor out the opcode checker into a helper inline.
The code got a tiny bit smaller:
text data bss dec hex filename
4632 32 24 4688 1250 fault.o.before
4618 32 24 4674 1242 fault.o.after
And it got cleaner / easier to review as well.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup, no code changed
Clean up various small details, which can be correctness checked
automatically:
- tidy up the include file section
- eliminate unnecessary includes
- introduce show_signal_msg() to clean up code flow
- standardize the code flow
- standardize comments and other style details
- more cleanups, pointed out by checkpatch
No code changed on either 32-bit nor 64-bit:
arch/x86/mm/fault.o:
text data bss dec hex filename
4632 32 24 4688 1250 fault.o.before
4632 32 24 4688 1250 fault.o.after
the md5 changed due to a change in a single instruction:
2e8a8241e7f0d69706776a5a26c90bc0 fault.o.before.asm
c5c3d36e725586eb74f0e10692f0193e fault.o.after.asm
Because a __LINE__ reference in a WARN_ONCE() has changed.
On 32-bit a few stack offsets changed - no code size difference
nor any functionality difference.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: future-proof the split_large_page() function
Linus noticed that split_large_page() is not safe wrt. the
PAT bit: it is bit 12 on the 1GB and 2MB page table level
(_PAGE_BIT_PAT_LARGE), and it is bit 7 on the 4K page
table level (_PAGE_BIT_PAT).
Currently it is not a problem because we never set
_PAGE_BIT_PAT_LARGE on any of the large-page mappings - but
should this happen in the future the split_large_page() would
silently lift bit 12 into the lowlevel 4K pte and would start
corrupting the physical page frame offset. Not fun.
So add a debug warning, to make sure if something ever sets
the PAT bit then this function gets updated too.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix to prevent hard lockup on bad PMD permissions
If the PMD does not have the correct permissions for a page access,
but the PTE does, the spurious fault handler will mistake the fault
as a lazy TLB transaction. This will result in an infinite loop of:
fault -> spurious_fault check (pass) -> return to code -> fault
This patch adds a check and a warn on if the PTE passes the permissions
but the PMD does not.
[ Updated: Ingo Molnar suggested using WARN_ONCE with some text ]
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Steven Rostedt found a bug in where in his modified kernel
ftrace was unable to modify the kernel text, due to the PMD
itself having been marked read-only as well in
split_large_page().
The fix, suggested by Linus, is to not try to 'clone' the
reference protection of a huge-page, but to use the standard
(and permissive) page protection bits of KERNPG_TABLE.
The 'cloning' makes sense for the ptes but it's a confused and
incorrect concept at the page table level - because the
pagetable entry is a set of all ptes and hence cannot
'clone' any single protection attribute - the ptes can be any
mixture of protections.
With the permissive KERNPG_TABLE, even if the pte protections
get changed after this point (due to ftrace doing code-patching
or other similar activities like kprobes), the resulting combined
protections will still be correct and the pte's restrictive
(or permissive) protections will control it.
Also update the comment.
This bug was there for a long time but has not caused visible
problems before as it needs a rather large read-only area to
trigger. Steve possibly hacked his kernel with some really
large arrays or so. Anyway, the bug is definitely worth fixing.
[ Huang Ying also experienced problems in this area when writing
the EFI code, but the real bug in split_large_page() was not
realized back then. ]
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Huang Ying <ying.huang@intel.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix time warps under vmware
Similar to the check for TSC going backwards in the TSC clocksource,
we also need this check for VMI clocksource.
Signed-off-by: Alok N Kataria <akataria@vmware.com>
Cc: Zachary Amsden <zach@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: stable@kernel.org
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, mce: fix ifdef for 64bit thermal apic vector clear on shutdown
x86, mce: use force_sig_info to kill process in machine check
x86, mce: reinitialize per cpu features on resume
x86, rcu: fix strange load average and ksoftirqd behavior
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: limit the number of loops the ring buffer self test can make
tracing: have function trace select kallsyms
tracing: disable tracing while testing ring buffer
tracing/function-graph-tracer: trace the idle tasks
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
[S390] fix "mem=" handling in case of standby memory
[S390] Fix timeval regression on s390
[S390] sclp: handle empty event buffers
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
sound: virtuoso: revert "do not overwrite EEPROM on Xonar D2/D2X"
ALSA: jack - Use card->shortname for input name
ALSA: usb-audio - Workaround for misdetected sample rate with CM6207
ALSA: usb-audio - Fix non-continuous rate detection
sound: usb-audio: fix uninitialized variable with M-Audio MIDI interfaces
Revert "Sound: hda - Restore PCI configuration space with interrupts off"
Remove the gesbc9312.h header since it is unused.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Impact: clenaup
Linker script will put startup_32 at predefined
address so using startup_32 will not bloat the
code size.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: clenaup
Linker script will put startup_32 at predefined
address so using ENTRY will not bloat the code
size.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
We are in setup stage so we use GLOBAL
instead of ENTRY and do not increase code
size.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: cleanup
There was an attempt to bring build-time checking for
missed ENTRY_X86/END_X86 and KPROBE... pairs. Using
them will add messy in code. Get just rid of them.
This commit could be easily restored if the need appear
in future.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If the code is time critical and this entry is called
from other places we use ENTRY to have it globally defined
and especially aligned.
Contrary we have some snippets which are size
critical. So we use plane ".globl name; name:"
directive. Introduce GLOBAL macro for this.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
READ_IMPLIES_EXEC must be set when:
o binary _is_ an executable stack (i.e. not EXSTACK_DISABLE_X)
o processor architecture is _under_ ARMv6 (XN bit is supported from ARMv6)
Signed-off-by: Makito SHIOKAWA <lkhmkt@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Standby memory detected with the sclp interface gets always registered
with add_memory calls without considering the limitationt that the
"mem=" kernel paramater implies.
So fix this and only register standby memory that is below the specified
limit.
This fixes zfcpdump since it uses "mem=32M". In case there is appr.
2GB standby memory present all of usable memory would be used for the
struct pages needed for standby memory.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
commit aa5e97ce4b
[PATCH] improve precision of process accounting.
Introduced a timing regression:
-bash-3.2# time ls
real 0m0.006s
user 0m1.754s
sys 0m1.094s
The problem was introduced by an error in cputime_to_timeval.
Cputime is now 1/4096 microsecond, therefore, we have to divide
the remainder with 4096 to get the microseconds.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Handle a malformed hardware response which some versions of the
Support Element (SE) may present during SE restart and which otherwise
would result in an endless loop in function sclp_dispatch_evbufs.
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
When changing the parent of a clock, it is necessary to keep the
clock use counts balanced otherwise things the parent state will
get corrupted. Since we already disable and re-enable the clock,
we might as well use the recursive versions instead.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
