Take a pass at cleaning up a bunch of warnings
from 'make dtbs_check' that have crept in.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210421204833.18523-1-khilman@baylibre.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYIEprQAKCRDj7w1vZxhR
xSnLAQDInWpOUh1W1ovIe0lHOWYDvByozCh4zQcssKHJhwp25QD/RPTVbwIJI0KV
pOaf8QuqaP74K7KVpbEPBhJG0d6GtwM=
=AaDi
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
One fix for the MMC card detect on the Pine H64 board
* tag 'sunxi-fixes-for-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS
Link: https://lore.kernel.org/r/45fc5e4d-ef48-4729-a869-79a8f288bb83.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
GIC CPU interfaces versions predating GIC v4.1 were not built to
accommodate vINTID within the vSGI range; as reported in the GIC
specifications (8.2 "Changes to the CPU interface"), it is
CONSTRAINED UNPREDICTABLE to deliver a vSGI to a PE with
ID_AA64PFR0_EL1.GIC < b0011.
Check the GIC CPUIF version by reading the SYS_ID_AA64_PFR0_EL1.
Disable vSGIs if a CPUIF version < 4.1 is detected to prevent using
vSGIs on systems where they may misbehave.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210317100719.3331-2-lorenzo.pieralisi@arm.com
KVM/arm64 is the sole user of perf_num_counters(), and really
could do without it. Stop using the obsolete API by relying on
the existing probing code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210414134409.1266357-2-maz@kernel.org
Commit 941432d007 ("arm64: dts: allwinner: Drop non-removable from
SoPine/LTS SD card") enabled the card detect GPIO for the SOPine module,
along the way with the Pine64-LTS, which share the same base .dtsi.
This was based on the observation that the Pine64-LTS has as "push-push"
SD card socket, and that the schematic mentions the card detect GPIO.
After having received two reports about failing SD card access with that
patch, some more research and polls on that subject revealed that there
are at least two different versions of the Pine64-LTS out there:
- On some boards (including mine) the card detect pin is "stuck" at
high, regardless of an microSD card being inserted or not.
- On other boards the card-detect is working, but is active-high, by
virtue of an explicit inverter circuit, as shown in the schematic.
To cover all versions of the board out there, and don't take any chances,
let's revert the introduction of the active-low CD GPIO, but let's use
the broken-cd property for the Pine64-LTS this time. That should avoid
regressions and should work for everyone, even allowing SD card changes
now.
The SOPine card detect has proven to be working, so let's keep that
GPIO in place.
Fixes: 941432d007 ("arm64: dts: allwinner: Drop non-removable from SoPine/LTS SD card")
Reported-by: Michael Weiser <michael.weiser@gmx.de>
Reported-by: Daniel Kulesz <kuleszdl@posteo.org>
Suggested-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Michael Weiser <michael.weiser@gmx.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210414104740.31497-1-andre.przywara@arm.com
Add a node describing the address in the SoC memory space for the IERB.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This contains three audio related fixes for the sc7180 Trogdor devices.
-----BEGIN PGP SIGNATURE-----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=LhLX
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Even more Qualcomm ARM64 updates for v5.13
This contains three audio related fixes for the sc7180 Trogdor devices.
* tag 'qcom-arm64-for-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sc7180: Update iommu property for simultaneous playback
arm64: dts: qcom: sc7180: pompom: Add "dmic_clk_en" + sound model
arm64: dts: qcom: sc7180: coachz: Add "dmic_clk_en"
Link: https://lore.kernel.org/r/20210419151637.861409-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This was present downstream. Add upstream too. NOTE: upstream I
managed to get some sort of halfway state and got one pinctrl entry in
the coachz-r1 device tree. Remove that as part of this since it's now
in the dtsi.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Cc: Ajit Pandey <ajitp@codeaurora.org>
Cc: Judy Hsiao <judyhsiao@chromium.org>
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20210315133924.v2.1.I601a051cad7cfd0923e55b69ef7e5748910a6096@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Another smaller set of fixes for three of the Arm platforms:
TI OMAP:
Fix swapped mmc device order also for omap3 that got changed with the
recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the aliases
should be board specific, all the mmc device instances are all there in
the SoC, and we do probe them by default so that PM runtime can idle the
devices if left enabled from the bootloader.
Qualcomm Snapdragon:
This bypasses the, recently introduced, interconnect handling in the
GENI (serial engine) driver when running off ACPI, as this causes the
GENI probe to fail and the Lenovo Yoga C630 to boot without keyboard
and touchpad.
Allwinner:
One 32kHz clock fix for the beelink gs1, a CD polarity fix for the SoPine,
some MAINTAINERS maintainance, and a clk / reset switch to our headers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmB8hfwACgkQmmx57+YA
GNn5QA//TBcW23bLfjYI8kPl7yJ9KSD6UdNGHXYizJry5hAoyLhvCVSq6quPmAPy
psempGKQBYiRb0Ftewc2+v00u4XdOTxqFw2MDs6UoladfiqyYfkEJxPgXG/k0msJ
gGIOT5ysDeRiqNAFND0wO6z/wPmlgJl37yTztOrbghWwYLvwlUkqsXzJ9B72FCzM
MGwrv1LZfEiljuaJAT+nVNkStKxCxSWjzIvYMgC/K9xbAjjtJNZby2tNJObMiARe
d3G2nGYmo414eQGNb+SDBx5h4aPZGR0ZxdLbzhAFrdw+uUzwlnJ1ufJQnEr6CXql
4MziHYWRYOAF90uLVeWiH8ZEh/CbxdnenmYCooOj+LAkn6IHAErRlFeZAfjWnckh
pwcdeebk4SQ9SNDPIWwwVYKVeGtnMM7q8HucDulMRxYmDL5sTprMhJVwxXbshivw
dnYWzV86FUIOgegUyFgzPKSTVqHbG68dxz2yRhR8yP56pTLnzh/lsB+0DmtiHcIx
O8chRnvtJib5/XspF6CVXqWYDrvIR5L8h7JMbSU/IetADJwQyEYz9CVh/DyNuiJQ
+oZY8Xqt3NzC9xOP/pTP6NFDYsVvKwsQRdwT3CBoV7lEM9X4wEypHOR+QmvO8q8m
AhddgIhx3P7olKnKgylPXS0kjQ3AuBarmnUMI9eaS2tHO2n5z/Y=
=f2ly
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another smaller set of fixes for three of the Arm platforms:
TI OMAP:
Fix swapped mmc device order also for omap3 that got changed with
the recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the
aliases should be board specific, all the mmc device instances are
all there in the SoC, and we do probe them by default so that PM
runtime can idle the devices if left enabled from the bootloader.
Qualcomm Snapdragon:
This bypasses the recently introduced interconnect handling in
the GENI (serial engine) driver when running off ACPI, as this
causes the GENI probe to fail and the Lenovo Yoga C630 to boot
without keyboard and touchpad.
Allwinner:
One 32kHz clock fix for the beelink gs1, a CD polarity fix for the
SoPine, some MAINTAINERS maintainance, and a clk / reset switch to
our headers"
* tag 'arm-fixes-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: allwinner: h6: beelink-gs1: Remove ext. 32 kHz osc reference
MAINTAINERS: Match on allwinner keyword
MAINTAINERS: Add our new mailing-list
arm64: dts: allwinner: Fix SD card CD GPIO for SOPine systems
arm64: dts: allwinner: h6: Switch to macros for RSB clock/reset indices
ARM: OMAP2+: Fix uninitialized sr_inst
ARM: dts: Fix swapped mmc order for omap3
ARM: OMAP2+: Fix warning for omap_init_time_of()
soc: qcom: geni: shield geni_icc_get() for ACPI boot
Yank out the hva-based MMU notifier APIs now that all architectures that
use the notifiers have moved to the gfn-based APIs.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210402005658.3024832-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move arm64 to the gfn-base MMU notifier APIs, which do the hva->gfn
lookup in common code.
No meaningful functional change intended, though the exact order of
operations is slightly different since the memslot lookups occur before
calling into arch code.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210402005658.3024832-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move KVM_GUESTDBG_VALID_MASK to kvm_host.h
and use it to return the value of this capability.
Compile tested only.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210401135451.1004564-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move arm64's MMU notifier trace events into common code in preparation
for doing the hva->gfn lookup in common code. The alternative would be
to trace the gfn instead of hva, but that's not obviously better and
could also be done in common code. Tracing the notifiers is also quite
handy for debug regardless of architecture.
Remove a completely redundant tracepoint from PPC e500.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210326021957.1424875-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the prototypes for the MMU notifier callbacks out of arch code and
into common code. There is no benefit to having each arch replicate the
prototypes since any deviation from the invocation in common code will
explode.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210326021957.1424875-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_KASAN_STACK and CONFIG_KASAN_STACK_ENABLE both enable KASAN stack
instrumentation, but we should only need one config, so that we remove
CONFIG_KASAN_STACK_ENABLE and make CONFIG_KASAN_STACK workable. see [1].
When enable KASAN stack instrumentation, then for gcc we could do no
prompt and default value y, and for clang prompt and default value n.
This patch fixes the following compilation warning:
include/linux/kasan.h:333:30: warning: 'CONFIG_KASAN_STACK' is not defined, evaluates to 0 [-Wundef]
[akpm@linux-foundation.org: fix merge snafu]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=210221 [1]
Link: https://lkml.kernel.org/r/20210226012531.29231-1-walter-zh.wu@mediatek.com
Fixes: d9b571c885 ("kasan: fix KASAN_STACK dependency for HW_TAGS")
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=P730
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Fix kernel compilation when using the LLVM integrated assembly.
A recent commit (2decad92f4, "arm64: mte: Ensure TIF_MTE_ASYNC_FAULT
is set atomically") broke the kernel build when using the LLVM
integrated assembly (only noticeable with clang-12 as MTE is not
supported by earlier versions and the code in question not compiled).
The Fixes: tag in the commit refers to the original patch introducing
subsections for the alternative code sequences"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: alternatives: Move length validation in alternative_{insn, endif}
The new carry handling code in the CTR driver can deal with a carry
occurring in the 4x/5x parallel code path, by using a computed goto to
jump into the carry sequence at the right place as to only apply the
carry to a subset of the blocks being processed.
If the lower half of the counter wraps and ends up at exactly 0x0, a
carry needs to be applied to the counter, but not to the counter values
taken for the 4x/5x parallel sequence. In this case, the computed goto
skips all register assignments, and branches straight to the jump
instruction that gets us back to the fast path. This produces the
correct result, but due to the fact that this branch target does not
carry the correct BTI annotation, this fails when BTI is enabled.
Let's omit the computed goto entirely in this case, and jump straight
back to the fast path after applying the carry to the main counter.
Fixes: 5318d3db46 ("crypto: arm64/aes-ctr - improve tail handling")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
After commit 2decad92f4 ("arm64: mte: Ensure TIF_MTE_ASYNC_FAULT is
set atomically"), LLVM's integrated assembler fails to build entry.S:
<instantiation>:5:7: error: expected assembly-time absolute expression
.org . - (664b-663b) + (662b-661b)
^
<instantiation>:6:7: error: expected assembly-time absolute expression
.org . - (662b-661b) + (664b-663b)
^
The root cause is LLVM's assembler has a one-pass design, meaning it
cannot figure out these instruction lengths when the .org directive is
outside of the subsection that they are in, which was changed by the
.arch_extension directive added in the above commit.
Apply the same fix from commit 966a0acce2 ("arm64/alternatives: move
length validation inside the subsection") to the alternative_endif
macro, shuffling the .org directives so that the length validation
happen will always happen in the same subsections. alternative_insn has
not shown any issue yet but it appears that it could have the same issue
in the future so just preemptively change it.
Fixes: f7b93d4294 ("arm64/alternatives: use subsections for replacement sequences")
Cc: <stable@vger.kernel.org> # 5.8.x
Link: https://github.com/ClangBuiltLinux/linux/issues/1347
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20210414000803.662534-1-nathan@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* for-next/misc:
: Miscellaneous patches
arm64/sve: Add compile time checks for SVE hooks in generic functions
arm64/kernel/probes: Use BUG_ON instead of if condition followed by BUG.
arm64/sve: Remove redundant system_supports_sve() tests
arm64: mte: Remove unused mte_assign_mem_tag_range()
arm64: Add __init section marker to some functions
arm64/sve: Rework SVE access trap to convert state in registers
docs: arm64: Fix a grammar error
arm64: smp: Add missing prototype for some smp.c functions
arm64: setup: name `tcr` register
arm64: setup: name `mair` register
arm64: stacktrace: Move start_backtrace() out of the header
arm64: barrier: Remove spec_bar() macro
arm64: entry: remove test_irqs_unmasked macro
ARM64: enable GENERIC_FIND_FIRST_BIT
arm64: defconfig: Use DEBUG_INFO_REDUCED
* for-next/kselftest:
: Various kselftests for arm64
kselftest: arm64: Add BTI tests
kselftest/arm64: mte: Report filename on failing temp file creation
kselftest/arm64: mte: Fix clang warning
kselftest/arm64: mte: Makefile: Fix clang compilation
kselftest/arm64: mte: Output warning about failing compiler
kselftest/arm64: mte: Use cross-compiler if specified
kselftest/arm64: mte: Fix MTE feature detection
kselftest/arm64: mte: common: Fix write() warnings
kselftest/arm64: mte: user_mem: Fix write() warning
kselftest/arm64: mte: ksm_options: Fix fscanf warning
kselftest/arm64: mte: Fix pthread linking
kselftest/arm64: mte: Fix compilation with native compiler
* for-next/xntable:
: Add hierarchical XN permissions for all page tables
arm64: mm: use XN table mapping attributes for user/kernel mappings
arm64: mm: use XN table mapping attributes for the linear region
arm64: mm: add missing P4D definitions and use them consistently
* for-next/vdso:
: Minor improvements to the compat vdso and sigpage
arm64: compat: Poison the compat sigpage
arm64: vdso: Avoid ISB after reading from cntvct_el0
arm64: compat: Allow signal page to be remapped
arm64: vdso: Remove redundant calls to flush_dcache_page()
arm64: vdso: Use GFP_KERNEL for allocating compat vdso and signal pages
* for-next/fiq:
: Support arm64 FIQ controller registration
arm64: irq: allow FIQs to be handled
arm64: Always keep DAIF.[IF] in sync
arm64: entry: factor irq triage logic into macros
arm64: irq: rework root IRQ handler registration
arm64: don't use GENERIC_IRQ_MULTI_HANDLER
genirq: Allow architectures to override set_handle_irq() fallback
* for-next/epan:
: Support for Enhanced PAN (execute-only permissions)
arm64: Support execute-only permissions with Enhanced PAN
* for-next/kasan-vmalloc:
: Support CONFIG_KASAN_VMALLOC on arm64
arm64: Kconfig: select KASAN_VMALLOC if KANSAN_GENERIC is enabled
arm64: kaslr: support randomized module area with KASAN_VMALLOC
arm64: Kconfig: support CONFIG_KASAN_VMALLOC
arm64: kasan: abstract _text and _end to KERNEL_START/END
arm64: kasan: don't populate vmalloc area for CONFIG_KASAN_VMALLOC
* for-next/fgt-boot-init:
: Booting clarifications and fine grained traps setup
arm64: Require that system registers at all visible ELs be initialized
arm64: Disable fine grained traps on boot
arm64: Document requirements for fine grained traps at boot
* for-next/vhe-only:
: Dealing with VHE-only CPUs (a.k.a. M1)
arm64: Get rid of CONFIG_ARM64_VHE
arm64: Cope with CPUs stuck in VHE mode
arm64: cpufeature: Allow early filtering of feature override
* arm64/for-next/perf:
arm64: perf: Remove redundant initialization in perf_event.c
perf/arm_pmu_platform: Clean up with dev_printk
perf/arm_pmu_platform: Fix error handling
perf/arm_pmu_platform: Use dev_err_probe() for IRQ errors
docs: perf: Address some html build warnings
docs: perf: Add new description on HiSilicon uncore PMU v2
drivers/perf: hisi: Add support for HiSilicon PA PMU driver
drivers/perf: hisi: Add support for HiSilicon SLLC PMU driver
drivers/perf: hisi: Update DDRC PMU for programmable counter
drivers/perf: hisi: Add new functions for HHA PMU
drivers/perf: hisi: Add new functions for L3C PMU
drivers/perf: hisi: Add PMU version for uncore PMU drivers.
drivers/perf: hisi: Refactor code for more uncore PMUs
drivers/perf: hisi: Remove unnecessary check of counter index
drivers/perf: Simplify the SMMUv3 PMU event attributes
drivers/perf: convert sysfs sprintf family to sysfs_emit
drivers/perf: convert sysfs scnprintf family to sysfs_emit_at() and sysfs_emit()
drivers/perf: convert sysfs snprintf family to sysfs_emit
* for-next/neon-softirqs-disabled:
: Run kernel mode SIMD with softirqs disabled
arm64: fpsimd: run kernel mode NEON with softirqs disabled
arm64: assembler: introduce wxN aliases for wN registers
arm64: assembler: remove conditional NEON yield macros
The FPSIMD code was relying on IS_ENABLED() checks in system_suppors_sve()
to cause the compiler to delete references to SVE functions in some places,
add explicit IS_ENABLED() checks back.
Fixes: ef9c5d0979 ("arm64/sve: Remove redundant system_supports_sve() tests")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210415121742.36628-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
- Fix incorrect asm constraint for load_unaligned_zeropad() fixup
- Fix thread flag update when setting TIF_MTE_ASYNC_FAULT
- Fix restored irq state when handling fault on kprobe
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmB2sKMQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNEViB/47lQncMY12/AFYk16Dn3qgY7wvrZNLEPoz
fCUr05So46OyRhzIfOhakCPRQzXYapMTWJzPDL6Ok9VmdawSf1UA80oNs02UAQsA
63j4/jEXC+rICS42mbfbwNgNA7BNx9Ek0AR778iqQglwrVEVhMF5M1epgaGOairG
4HH2NMzrP6P60gRwGVOsGrmpDfXMMuX45DE1ca8EKN5TnDGTfczrZ8sw8MrVTSDe
cT5H++qOdH8NalqlOeOB9XcHoL2Af4OG4LJQOlg3UZztQm6jnBrNe/VU9IgLPQl4
kb+HP6qTtMAVOMHn6w6glK93rXaK2PCOOfL3yFyZfHc1Q1xAMU4S
=3J2L
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- Fix incorrect asm constraint for load_unaligned_zeropad() fixup
- Fix thread flag update when setting TIF_MTE_ASYNC_FAULT
- Fix restored irq state when handling fault on kprobe
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kprobes: Restore local irqflag if kprobes is cancelled
arm64: mte: Ensure TIF_MTE_ASYNC_FAULT is set atomically
arm64: fix inline asm in load_unaligned_zeropad()
For the same reason as commit e876f0b69d ("lib/vdso: Allow
architectures to provide the vdso data pointer"), powerpc wants to
avoid calculation of relative position to code.
As the timens_vdso_data is next page to vdso_data, provide
vdso_data pointer to __arch_get_timens_vdso_data() in order
to ease the calculation on powerpc in following patches.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/539c4204b1baa77c55f758904a1ea239abbc7a5c.1617209142.git.christophe.leroy@csgroup.eu
The kernel does not use any keys besides IA so we don't need to
install IB/DA/DB/GA on kernel exit if we arrange to install them
on task switch instead, which we can expect to happen an order of
magnitude less often.
Furthermore we can avoid installing the user IA in the case where the
user task has IA disabled and just leave the kernel IA installed. This
also lets us avoid needing to install IA on kernel entry.
On an Apple M1 under a hypervisor, the overhead of kernel entry/exit
has been measured to be reduced by 15.6ns in the case where IA is
enabled, and 31.9ns in the case where IA is disabled.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Link: https://linux-review.googlesource.com/id/Ieddf6b580d23c9e0bed45a822dabe72d2ffc9a8e
Link: https://lore.kernel.org/r/2d653d055f38f779937f2b92f8ddd5cf9e4af4f4.1616123271.git.pcc@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This change introduces a prctl that allows the user program to control
which PAC keys are enabled in a particular task. The main reason
why this is useful is to enable a userspace ABI that uses PAC to
sign and authenticate function pointers and other pointers exposed
outside of the function, while still allowing binaries conforming
to the ABI to interoperate with legacy binaries that do not sign or
authenticate pointers.
The idea is that a dynamic loader or early startup code would issue
this prctl very early after establishing that a process may load legacy
binaries, but before executing any PAC instructions.
This change adds a small amount of overhead to kernel entry and exit
due to additional required instruction sequences.
On a DragonBoard 845c (Cortex-A75) with the powersave governor, the
overhead of similar instruction sequences was measured as 4.9ns when
simulating the common case where IA is left enabled, or 43.7ns when
simulating the uncommon case where IA is disabled. These numbers can
be seen as the worst case scenario, since in more realistic scenarios
a better performing governor would be used and a newer chip would be
used that would support PAC unlike Cortex-A75 and would be expected
to be faster than Cortex-A75.
On an Apple M1 under a hypervisor, the overhead of the entry/exit
instruction sequences introduced by this patch was measured as 0.3ns
in the case where IA is left enabled, and 33.0ns in the case where
IA is disabled.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://linux-review.googlesource.com/id/Ibc41a5e6a76b275efbaa126b31119dc197b927a5
Link: https://lore.kernel.org/r/d6609065f8f40397a4124654eb68c9f490b4d477.1616123271.git.pcc@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When reading the base address of the a REDIST region
through KVM_VGIC_V3_ADDR_TYPE_REDIST we expect the
redistributor region list to be populated with a single
element.
However list_first_entry() expects the list to be non empty.
Instead we should use list_first_entry_or_null which effectively
returns NULL if the list is empty.
Fixes: dbd9733ab6 ("KVM: arm/arm64: Replace the single rdist region by a list")
Cc: <Stable@vger.kernel.org> # v4.18+
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210412150034.29185-1-eric.auger@redhat.com
Currently there are a number of places in the SVE code where we check both
system_supports_sve() and TIF_SVE. This is a bit redundant given that we
should never get into a situation where we have set TIF_SVE without having
SVE support and it is not clear that silently ignoring a mistakenly set
TIF_SVE flag is the most sensible error handling approach. For now let's
just drop the system_supports_sve() checks since this will at least reduce
overhead a little.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210412172320.3315-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
and using ranged values to allow better compatibility with regulator
steps), gpu opps on px30, infrared receiver on rockpro64,
USB3 support on rk3328, MMC alias fixups, dt-compatible fixes.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmByvnMQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdga73B/9EvLxu08VwgERaPs1n6XrjpDwfid7u9ops
wi5/bLqeBK4Jrg7jrlN1snwzfqnqPeDe2amZyi1CwCnPJNmloIkMIdLtSwIdc2ws
85O8Oa3Yus3boRh+bQ67F8vP6QNNfu0u9q5Nqe3cQhp/R8PaCZy1gVVjX4ZJiFz8
qmcPsI92czrlK0zcjWU7LfIzYVUZ/XPKTcBDkpQb1wPJ2/j6mHz4a4XXrfltLtKJ
P1XpseI4YqIFt77cZV0bpeO49/wq5UX6KSdYDdpYzO9e8FUPT6Khhc4CpApsIxyY
QgHPe6pgJj/KZHI8/Qo9I0nLjxNTJXmad0FNIBvinuyATv2zSt4M
=Zu51
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rockchip-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
New board the NanoPi R4S, OPP adjustments on rk3399 (sync with vendor
and using ranged values to allow better compatibility with regulator
steps), gpu opps on px30, infrared receiver on rockpro64,
USB3 support on rk3328, MMC alias fixups, dt-compatible fixes.
* tag 'v5.13-rockchip-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: move mmc aliases to board dts on rk3399
arm64: dts: rockchip: move mmc aliases to board dts on rk3368
arm64: dts: rockchip: move mmc aliases to board dts on rk3328
arm64: dts: rockchip: move mmc aliases to board dts on rk3308
arm64: dts: rockchip: move mmc aliases to board dts on px30
arm64: dts: rockchip: add new watchdog compatible to rk3399.dtsi
arm64: dts: rockchip: add new watchdog compatible to rk3328.dtsi
arm64: dts: rockchip: add new watchdog compatible to rk3308.dtsi
arm64: dts: rockchip: add new watchdog compatible to px30.dtsi
arm64: dts: rockchip: enable dwc3 usb for A95X Z2
arm64: dts: rockchip: add rk3328 dwc3 usb controller node
rockchip: rk3399: Add support for FriendlyARM NanoPi R4S
dt-bindings: Add doc for FriendlyARM NanoPi R4S
arm64: dts: rockchip: add phandle to timer0 on rk3368
arm64: dts: rockchip: add infrared receiver node to rockpro64
arm64: dts: rockchip: drop separate opp table on rk3399-puma
arm64: dts: rockchip: used range'd gpu opps on rk3399
arm64: dts: rockchip: synchronize rk3399 opps with vendor kernel
arm64: dts: rockchip: Add gpu opp nodes to px30 dtsi
Link: https://lore.kernel.org/r/2191862.ElGaqSPkdT@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
If instruction being single stepped caused a page fault, the kprobes
is cancelled to let the page fault handler continue as a normal page
fault. But the local irqflags are disabled so cpu will restore pstate
with DAIF masked. After pagefault is serviced, the kprobes is
triggerred again, we overwrite the saved_irqflag by calling
kprobes_save_local_irqflag(). NOTE, DAIF is masked in this new saved
irqflag. After kprobes is serviced, the cpu pstate is retored with
DAIF masked.
This patch is inspired by one patch for riscv from Liao Chang.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20210412174101.6bfb0594@xhacker.debian
Signed-off-by: Will Deacon <will@kernel.org>
Pull ARM cpufreq updates for v5.13 from Viresh Kumar:
"- Fix typos in s5pv210 cpufreq driver (Bhaskar Chowdhury).
- Armada 37xx: Fix cpufreq changing base CPU speed to 800 MHz from
1000 MHz (Pali Rohár and Marek Behún).
- cpufreq-dt: Return -EPROBE_DEFER on failure to add table (Quanyang
Wang).
- Minor cleanup in cppc driver (Tom Saeger).
- Add frequency invariance support for CPPC driver and generalize
freq invariance support arch-topology driver (Viresh Kumar)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: armada-37xx: Fix module unloading
cpufreq: armada-37xx: Remove cur_frequency variable
cpufreq: armada-37xx: Fix determining base CPU frequency
cpufreq: armada-37xx: Fix driver cleanup when registration failed
clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0
clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz
cpufreq: armada-37xx: Fix the AVS value for load L1
clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock
cpufreq: armada-37xx: Fix setting TBG parent for load levels
cpufreq: dt: dev_pm_opp_of_cpumask_add_table() may return -EPROBE_DEFER
cpufreq: cppc: simplify default delay_us setting
cpufreq: Rudimentary typos fix in the file s5pv210-cpufreq.c
cpufreq: CPPC: Add support for frequency invariance
arch_topology: Export arch_freq_scale and helpers
arch_topology: Allow multiple entities to provide sched_freq_tick() callback
arch_topology: Rename freq_scale as arch_freq_scale
The entry from EL0 code checks the TFSRE0_EL1 register for any
asynchronous tag check faults in user space and sets the
TIF_MTE_ASYNC_FAULT flag. This is not done atomically, potentially
racing with another CPU calling set_tsk_thread_flag().
Replace the non-atomic ORR+STR with an STSET instruction. While STSET
requires ARMv8.1 and an assembler that understands LSE atomics, the MTE
feature is part of ARMv8.5 and already requires an updated assembler.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 637ec831ea ("arm64: mte: Handle synchronous and asynchronous tag check faults")
Cc: <stable@vger.kernel.org> # 5.10.x
Reported-by: Will Deacon <will@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210409173710.18582-1-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Kernel mode NEON can be used in task or softirq context, but only in
a non-nesting manner, i.e., softirq context is only permitted if the
interrupt was not taken at a point where the kernel was using the NEON
in task context.
This means all users of kernel mode NEON have to be aware of this
limitation, and either need to provide scalar fallbacks that may be much
slower (up to 20x for AES instructions) and potentially less safe, or
use an asynchronous interface that defers processing to a later time
when the NEON is guaranteed to be available.
Given that grabbing and releasing the NEON is cheap, we can relax this
restriction, by increasing the granularity of kernel mode NEON code, and
always disabling softirq processing while the NEON is being used in task
context.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210302090118.30666-4-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The AArch64 asm syntax has this slightly tedious property that the names
used in mnemonics to refer to registers depend on whether the opcode in
question targets the entire 64-bits (xN), or only the least significant
8, 16 or 32 bits (wN). When writing parameterized code such as macros,
this can be annoying, as macro arguments don't lend themselves to
indexed lookups, and so generating a reference to wN in a macro that
receives xN as an argument is problematic.
For instance, an upcoming patch that modifies the implementation of the
cond_yield macro to be able to refer to 32-bit registers would need to
modify invocations such as
cond_yield 3f, x8
to
cond_yield 3f, 8
so that the second argument can be token pasted after x or w to emit the
correct register reference. Unfortunately, this interferes with the self
documenting nature of the first example, where the second argument is
obviously a register, whereas in the second example, one would need to
go and look at the code to find out what '8' means.
So let's fix this by defining wxN aliases for all xN registers, which
resolve to the 32-bit alias of each respective 64-bit register. This
allows the macro implementation to paste the xN reference after a w to
obtain the correct register name.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210302090118.30666-3-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The users of the conditional NEON yield macros have all been switched to
the simplified cond_yield macro, and so the NEON specific ones can be
removed.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210302090118.30666-2-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This change adds KASAN-KUnit tests support for the async HW_TAGS mode.
In async mode, tag fault aren't being generated synchronously when a
bad access happens, but are instead explicitly checked for by the kernel.
As each KASAN-KUnit test expect a fault to happen before the test is over,
check for faults as a part of the test handler.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210315132019.33202-10-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When MTE async mode is enabled TFSR_EL1 contains the accumulative
asynchronous tag check faults for EL1 and EL0.
During the suspend/resume operations the firmware might perform some
operations that could change the state of the register resulting in
a spurious tag check fault report.
Report asynchronous tag faults before suspend and clear the TFSR_EL1
register after resume to prevent this to happen.
Cc: Will Deacon <will@kernel.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210315132019.33202-9-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
MTE provides a mode that asynchronously updates the TFSR_EL1 register
when a tag check exception is detected.
To take advantage of this mode the kernel has to verify the status of
the register at:
1. Context switching
2. Return to user/EL0 (Not required in entry from EL0 since the kernel
did not run)
3. Kernel entry from EL1
4. Kernel exit to EL1
If the register is non-zero a trace is reported.
Add the required features for EL1 detection and reporting.
Note: ITFSB bit is set in the SCTLR_EL1 register hence it guaranties that
the indirect writes to TFSR_EL1 are synchronized at exception entry to
EL1. On the context switch path the synchronization is guarantied by the
dsb() in __switch_to().
The dsb(nsh) in mte_check_tfsr_exit() is provisional pending
confirmation by the architects.
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210315132019.33202-8-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
mte_enable_kernel_*() are not needed if KASAN_HW is disabled.
Add ash defines around the functions to conditionally compile the
functions.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210315132019.33202-7-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
load_unaligned_zeropad() and __get/put_kernel_nofault() functions can
read past some buffer limits which may include some MTE granule with a
different tag.
When MTE async mode is enabled, the load operation crosses the boundaries
and the next granule has a different tag the PE sets the TFSR_EL1.TF1 bit
as if an asynchronous tag fault is happened.
Enable Tag Check Override (TCO) in these functions before the load and
disable it afterwards to prevent this to happen.
Note: The same condition can be hit in MTE sync mode but we deal with it
through the exception handling.
In the current implementation, mte_async_mode flag is set only at boot
time but in future kasan might acquire some runtime features that
that change the mode dynamically, hence we disable it when sync mode is
selected for future proof.
Cc: Will Deacon <will@kernel.org>
Reported-by: Branislav Rankov <Branislav.Rankov@arm.com>
Tested-by: Branislav Rankov <Branislav.Rankov@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210315132019.33202-6-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
arch_enable_tagging() was left in memory.h after the introduction of
async mode to not break the bysectability of the KASAN KUNIT tests.
Remove the function now that KASAN has been fully converted.
Cc: Will Deacon <will@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210315132019.33202-4-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
MTE provides an asynchronous mode for detecting tag exceptions. In
particular instead of triggering a fault the arm64 core updates a
register which is checked by the kernel after the asynchronous tag
check fault has occurred.
Add support for MTE asynchronous mode.
The exception handling mechanism will be added with a future patch.
Note: KASAN HW activates async mode via kasan.mode kernel parameter.
The default mode is set to synchronous.
The code that verifies the status of TFSR_EL1 will be added with a
future patch.
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210315132019.33202-2-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
As suggested by Arnd Bergmann, the newly added mmc aliases
should be board specific, so move them from the general dtsi
to the individual boards.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-7-heiko@sntech.de
As suggested by Arnd Bergmann, the newly added mmc aliases
should be board specific, so move them from the general dtsi
to the individual boards.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-6-heiko@sntech.de
As suggested by Arnd Bergmann, the newly added mmc aliases
should be board specific, so move them from the general dtsi
to the individual boards.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-5-heiko@sntech.de
As suggested by Arnd Bergmann, the newly added mmc aliases
should be board specific, so move them from the general dtsi
to the individual boards.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-4-heiko@sntech.de
As suggested by Arnd Bergmann, the newly added mmc aliases
should be board specific, so move them from the general dtsi
to the individual boards.
For the Engicam-boards this means a split as the core
boards contains the emmc while the commit baseboard handles
sdmmc and sdio.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-3-heiko@sntech.de
Even though KVM sets up MDCR_EL2 to trap accesses to the SPE buffer and
sampling control registers and to inject an undefined exception, the
presence of FEAT_SPE is still advertised in the ID_AA64DFR0_EL1 register,
if the hardware supports it. Getting an undefined exception when accessing
a register usually happens for a hardware feature which is not implemented,
and indeed this is how PMU emulation is handled when the virtual machine
has been created without the KVM_ARM_VCPU_PMU_V3 feature. Let's be
consistent and never advertise FEAT_SPE, because KVM doesn't have support
for emulating it yet.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210409152154.198566-3-alexandru.elisei@arm.com
KVM sets up MDCR_EL2 to trap accesses to the SPE buffer and sampling
control registers and it relies on the fact that KVM injects an undefined
exception for unknown registers. This mechanism of injecting undefined
exceptions also prints a warning message for the host kernel; for example,
when a guest tries to access PMSIDR_EL1:
[ 2.691830] kvm [142]: Unsupported guest sys_reg access at: 80009e78 [800003c5]
[ 2.691830] { Op0( 3), Op1( 0), CRn( 9), CRm( 9), Op2( 7), func_read },
This is unnecessary, because KVM has explicitly configured trapping of
those registers and is well aware of their existence. Prevent the warning
by adding the SPE registers to the list of registers that KVM emulates.
The access function will inject the undefined exception.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210409152154.198566-2-alexandru.elisei@arm.com
Change my e-mail address to kabel@kernel.org, and fix my name in
non-code parts (add diacritical mark).
Link: https://lkml.kernel.org/r/20210325171123.28093-2-kabel@kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds RPMh regulators, coresight, AOSS qmp, ipcc, llcc for the
SC7280. It adds interconnect, PRNG and thermal pieces to SM8350. It
specifies the now required clocks for the SDM845 gcc, corrects the
firmware-name for adsp and cdsp on the db845c and defines DSI and panel
bits for Xiaomi Pocophone F1.
SM8150 gains iommu settings and the remaining I2C controllers and SM8250
gains Venus and the QMP PHY is updated to include the DP portion.
It adds the MSM8998 based OnePlus 5/5T device and enables sound support
on the Trogdor device family.
Lastly it adds the GIC hypervisor registers & interrupt for when Linux
is booted in EL2 on MSM8916.
-----BEGIN PGP SIGNATURE-----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=7juS
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
More Qualcomm ARM64 DT updates for 5.13
This adds RPMh regulators, coresight, AOSS qmp, ipcc, llcc for the
SC7280. It adds interconnect, PRNG and thermal pieces to SM8350. It
specifies the now required clocks for the SDM845 gcc, corrects the
firmware-name for adsp and cdsp on the db845c and defines DSI and panel
bits for Xiaomi Pocophone F1.
SM8150 gains iommu settings and the remaining I2C controllers and SM8250
gains Venus and the QMP PHY is updated to include the DP portion.
It adds the MSM8998 based OnePlus 5/5T device and enables sound support
on the Trogdor device family.
Lastly it adds the GIC hypervisor registers & interrupt for when Linux
is booted in EL2 on MSM8916.
* tag 'qcom-arm64-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (25 commits)
arm64: dts: qcom: update usb qmp phy clock-cells property
arm64: dts: qcom: msm8916: Add GICv2 hypervisor registers/interrupt
arm64: dts: sdm845-db845c: make firmware filenames follow linux-firmware
arm64: dts: qcom: sdm845-xiaomi-beryllium: Add DSI and panel bits
arm64: dts: qcom: sc7280: Add Coresight support
arm64: dts: qcom: sc7280: Add AOSS QMP node
arm64: dts: qcom: sc7280: Add IPCC for SC7280 SoC
arm64: dts: qcom: sc7280: Add device tree node for LLCC
arm64: dts: qcom: Add support for OnePlus 5/5T
arm64: dts: qcom: msm8998: Disable MSS remoteproc by default
arm64: dts: qcom: Move rmtfs memory region
arm64: dts: qcom: Add sound node for sc7180-trogdor-coachz
arm64: dts: qcom: sc7180-trogdor: Add lpass dai link for I2S driver
arm64: dts: qcom: use dp_phy to provide clocks to dispcc
arm64: dts: qcom: sm8250: switch usb1 qmp phy to USB3+DP mode
arm64: dts: qcom: sm8250: Add venus DT node
arm64: dts: qcom: sm8250: Add videocc DT node
arm64: dts: qcom: sm8350: Add interconnects
arm64: dts: qcom: sm8350: Add support for PRNG EE
arm64: dts: qcom: sc7280: Add RPMh regulators for sc7280-idp
...
Link: https://lore.kernel.org/r/20210409163949.776530-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On vcpu reset, we expect all the registers to be brought back
to their initial state, which happens to be a bunch of zeroes.
However, some recent commit broke this, and is now leaving a bunch
of registers (such as the FP state) with whatever was left by the
guest. My bad.
Zero the reset of the state (32bit SPSRs and FPSIMD state).
Cc: stable@vger.kernel.org
Fixes: e47c2055c6 ("KVM: arm64: Make struct kvm_regs userspace-only")
Signed-off-by: Marc Zyngier <maz@kernel.org>
With CONFIG_CFI_CLANG, the compiler replaces function pointers with
jump table addresses, which breaks dynamic ftrace as the address of
ftrace_call is replaced with the address of ftrace_call.cfi_jt. Use
function_nocfi() to get the address of the actual function instead.
Suggested-by: Ben Dai <ben.dai@unisoc.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-17-samitolvanen@google.com
__apply_alternatives makes indirect calls to functions whose address
is taken in assembly code using the alternative_cb macro. With
non-canonical CFI, the compiler won't replace these function
references with the jump table addresses, which trips CFI. Disable CFI
checking in the function to work around the issue.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-16-samitolvanen@google.com
Disable CFI checking for functions that switch to linear mapping and
make an indirect call to a physical address, since the compiler only
understands virtual addresses and the CFI check for such indirect calls
would always fail.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-15-samitolvanen@google.com
With CONFIG_CFI_CLANG, the compiler replaces function address
references with the address of the function's CFI jump table
entry. This means that __pa_symbol(function) returns the physical
address of the jump table entry, which can lead to address space
confusion as the jump table points to the function's virtual
address. Therefore, use the function_nocfi() macro to ensure we are
always taking the address of the actual function instead.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-14-samitolvanen@google.com
With CONFIG_CFI_CLANG, the compiler replaces function addresses in
instrumented C code with jump table addresses. This change implements
the function_nocfi() macro, which returns the actual function address
instead.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-13-samitolvanen@google.com
list_sort() internally casts the comparison function passed to it
to a different type with constant struct list_head pointers, and
uses this pointer to call the functions, which trips indirect call
Control-Flow Integrity (CFI) checking.
Instead of removing the consts, this change defines the
list_cmp_func_t type and changes the comparison function types of
all list_sort() callers to use const pointers, thus avoiding type
mismatches.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-10-samitolvanen@google.com
This enables the SM8350 TLMM and GCC drivers, needed to boot the
platform.
-----BEGIN PGP SIGNATURE-----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=3aF9
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-defconfig-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig
Qualcomm ARM64 defconfig udpate for 5.13
This enables the SM8350 TLMM and GCC drivers, needed to boot the
platform.
* tag 'qcom-arm64-defconfig-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable Qualcomm SM8350 TLMM and GCC
Link: https://lore.kernel.org/r/20210404164841.712845-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
CONFIG_ARM64_VHE was introduced with ARMv8.1 (some 7 years ago),
and has been enabled by default for almost all that time.
Given that newer systems that are VHE capable are finally becoming
available, and that some systems are even incapable of not running VHE,
drop the configuration altogether.
Anyone willing to stick to non-VHE on VHE hardware for obscure
reasons should use the 'kvm-arm.mode=nvhe' command-line option.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210408131010.1109027-4-maz@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
It seems that the CPUs part of the SoC known as Apple M1 have the
terrible habit of being stuck with HCR_EL2.E2H==1, in violation
of the architecture.
Try and work around this deplorable state of affairs by detecting
the stuck bit early and short-circuit the nVHE dance. Additional
filtering code ensures that attempts at switching to nVHE from
the command-line are also ignored.
It is still unknown whether there are many more such nuggets
to be found...
Reported-by: Hector Martin <marcan@marcan.st>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210408131010.1109027-3-maz@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Some CPUs are broken enough that some overrides need to be rejected
at the earliest opportunity. In some cases, that's right at cpu
feature override time.
Provide the necessary infrastructure to filter out overrides,
and to report such filtered out overrides to the core cpufeature code.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210408131010.1109027-2-maz@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The arm64 FEAT_FGT extension introduces a set of traps to EL2 for accesses
to small sets of registers and instructions from EL1 and EL0. Currently
Linux makes no use of this feature, ensure that it is not active at boot by
disabling the traps during EL2 setup.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210401180942.35815-3-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
mte_assign_mem_tag_range() was added in commit 85f49cae4d
("arm64: mte: add in-kernel MTE helpers") in 5.11 but moved out of
mte.S by commit 2cb3427642 ("arm64: kasan: simplify and inline
MTE functions") in 5.12 and renamed to mte_set_mem_tag_range().
2cb3427642 did not delete the old function prototypes in mte.h.
Remove the unused prototype from mte.h.
Cc: Will Deacon <will@kernel.org>
Reported-by: Derrick McKee <derrick.mckee@gmail.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20210407133817.23053-1-vincenzo.frascino@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
They are not needed after booting, so mark them as __init to move them
to the .init section.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20210330135449.4dcffd7f@xhacker.debian
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When we enable SVE usage in userspace after taking a SVE access trap we
need to ensure that the portions of the register state that are not
shared with the FPSIMD registers are zeroed. Currently we do this by
forcing the FPSIMD registers to be saved to the task struct and converting
them there. This is wasteful in the common case where the task state is
loaded into the registers and we will immediately return to userspace
since we can initialise the SVE state directly in registers instead of
accessing multiple copies of the register state in memory.
Instead in that common case do the conversion in the registers and
update the task metadata so that we can return to userspace without
spilling the register state to memory unless there is some other reason
to do so.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210312190313.24598-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
MAINTAINERS maintainance, and a clk / reset switch to our headers.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYG2bAQAKCRDj7w1vZxhR
xW/cAQDpP3oAyk00M6ZMKIMefm/DQI3qbf9cA0P9JsPa1inNbAEA0WlHJt2zdGRT
ISRW7PI1TyHxMcVteyiw7gE5BvU7kAQ=
=Jgu5
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
One 32kHz clock fix for the beelink gs1, a CD polarity fix for the SoPine, some
MAINTAINERS maintainance, and a clk / reset switch to our headers.
* tag 'sunxi-fixes-for-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h6: beelink-gs1: Remove ext. 32 kHz osc reference
MAINTAINERS: Match on allwinner keyword
MAINTAINERS: Add our new mailing-list
arm64: dts: allwinner: Fix SD card CD GPIO for SOPine systems
arm64: dts: allwinner: h6: Switch to macros for RSB clock/reset indices
Link: https://lore.kernel.org/r/9972a85e-60b7-49f4-a246-db3396dd4764.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The top-level node doesn't provide any clocks, the subnode provides a
single clock with of_clk_hw_simple_get.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20201123143705.14277-1-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The ARM Cortex-A53 CPU cores and QGIC2 interrupt controller
(an implementation of the ARM GIC 2.0 specification) used in MSM8916
support virtualization, e.g. for KVM on Linux. However, so far it was
not possible to make use of this functionality, because Qualcomm's
proprietary "hyp" firmware blocks the EL2 mode of the CPU and only
allows booting Linux in EL1.
However, on devices without (firmware) secure boot there is no need
to rely on all of Qualcomm's firmware. The "hyp" firmware on MSM8916
seems simple enough that it can be replaced with an open-source
alternative created only based on trial and error - with some similar
EL2/EL1 initialization code adapted from Linux and U-Boot.
qhypstub [1] is such an open-source firmware for MSM8916 that
can be used as drop-in replacement for Qualcomm's "hyp" firmware.
It does not implement any hypervisor functionality.
Instead, it allows booting Linux/KVM (or other hypervisors) in EL2.
With Linux booting in EL2, KVM seems to be working just fine on MSM8916.
However, so far it is not possible to make use of the virtualization
features in the GICv2. To use KVM's VGICv2 code, the QGIC2 device tree
node needs additional resources (according to binding documentation):
- The CPU interface region (second reg) must be at least 8 KiB large
to access the GICC_DIR register (mapped at 0x1000 offset)
- Virtual control/CPU interface register base and size
- Hypervisor maintenance interrupt
Fortunately, the public APQ8016E TRM [2] provides the required information:
- The CPU interface region (at 0x0B002000) actually has a size of 8 KiB
- Virtual control/CPU interface register is at 0x0B001000/0x0B004000
- Hypervisor maintenance interrupt is "PPI #0"
Note: This is a bit strange since almost all other ARM SoCs use
GIC_PPI 9 for this. However, I have verified that this is
indeed the interrupt that fires when bits are set in GICH_HCR.
Add the additional resources to the QGIC2 device tree node in msm8916.dtsi.
There is no functional difference when Linux is started in EL1 since the
additional resources are ignored in that case.
With these changes (and qhypstub), KVM seems to be fully working on
the DragonBoard 410c (apq8016-sbc) and BQ Aquaris X5 (longcheer-l8910).
[1]: https://github.com/msm8916-mainline/qhypstub
[2]: https://developer.qualcomm.com/download/sd410/snapdragon-410e-technical-reference-manual.pdf
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210407163648.4708-1-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Allow for a randomized stack offset on a per-syscall basis, with roughly
5 bits of entropy. (And include AAPCS rationale AAPCS thanks to Mark
Rutland.)
In order to avoid unconditional stack canaries on syscall entry (due to
the use of alloca()), also disable stack protector to avoid triggering
needless checks and slowing down the entry path. As there is no general
way to control stack protector coverage with a function attribute[1],
this must be disabled at the compilation unit level. This isn't a problem
here, though, since stack protector was not triggered before: examining
the resulting syscall.o, there are no changes in canary coverage (none
before, none now).
[1] a working __attribute__((no_stack_protector)) has been added to GCC
and Clang but has not been released in any version yet:
https://gcc.gnu.org/git/gitweb.cgi?p=gcc.git;h=346b302d09c1e6db56d9fe69048acb32fbb97845https://reviews.llvm.org/rG4fbf84c1732fca596ad1d6e96015e19760eb8a9b
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210401232347.2791257-6-keescook@chromium.org
This currently supports:
* SMP (via spin-tables)
* AIC IRQs
* Serial (with earlycon)
* Framebuffer
A number of properties are dynamic, and based on system firmware
decisions that vary from version to version. These are expected
to be filled in by the loader.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
This adds a Kconfig option to toggle support for Apple ARM SoCs.
At this time this targets the M1 and later "Apple Silicon" Mac SoCs.
Signed-off-by: Hector Martin <marcan@marcan.st>
These definitions are in arm-gic-v3.h for historical reasons which no
longer apply. Move them to sysreg.h so the AIC driver can use them, as
it needs to peek into vGIC registers to deal with the GIC maintentance
interrupt.
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
