Commit Graph

390381 Commits

Author SHA1 Message Date
Nicolas Dichtel
8b27f27797 skb: allow skb_scrub_packet() to be used by tunnels
This function was only used when a packet was sent to another netns. Now, it can
also be used after tunnel encapsulation or decapsulation.

Only skb_orphan() should not be done when a packet is not crossing netns.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 00:27:25 -04:00
Nicolas Dichtel
117961878c vxlan: remove net arg from vxlan[6]_xmit_skb()
This argument is not used, let's remove it.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 00:27:25 -04:00
Nicolas Dichtel
8b7ed2d91d iptunnels: remove net arg from iptunnel_xmit()
This argument is not used, let's remove it.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 00:27:25 -04:00
nikolay@redhat.com
c48268611a bonding: drop read_lock in bond_compute_features
bond_compute_features is always called with RTNL held, so we can safely
drop the read bond->lock.

Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 00:27:25 -04:00
nikolay@redhat.com
9b7b165ac1 bonding: drop read_lock in bond_fix_features
We're protected by RTNL so nothing can happen and we can safely drop the
read bond->lock.

Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 00:27:25 -04:00
nikolay@redhat.com
c509316b5b bonding: simplify bond_3ad_update_lacp_rate and use RTNL for sync
We can drop the use of bond->lock for mutual exclusion in
bond_3ad_update_lacp_rate and use RTNL in the sysfs store function
instead. This way we'll prevent races with mode change and interface
up/down as well as simplify update_lacp_rate by removing the check for
port->slave because it'll always be initialized (done while enslaving
with RTNL). This change will also help in the future removal of reader
bond->lock from bond_enslave.

Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 00:27:24 -04:00
nikolay@redhat.com
ee8487c0e1 bonding: trivial: remove outdated comment and braces
We don't have to release all slaves when closing the bond dev, so remove
the outdated comment and the braces around the left single statement.

Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 00:27:24 -04:00
nikolay@redhat.com
6c8d23f786 bonding: simplify and fix peer notification
This patch aims to remove a use of the bond->lock for mutual exclusion
which will later allow easier migration to RCU of the users of this
functionality. We use RTNL as a synchronizing mechanism since it's
always held when send_peer_notif is set, and when it is decremented from
the notifier function. We can also drop some locking, and fix the
leakage of the send_peer_notif counter.

Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04 00:27:24 -04:00
Jason Wang
f7c6be404d vhost_net: correctly limit the max pending buffers
As Michael point out, We used to limit the max pending DMAs to get better cache
utilization. But it was not done correctly since it was one done when there's no
new buffers submitted from guest. Guest can easily exceeds the limitation by
keeping sending packets.

So this patch moves the check into main loop. Tests shows about 5%-10%
improvement on per cpu throughput for guest tx.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 22:46:58 -04:00
Jason Wang
19c73b3e08 vhost_net: poll vhost queue after marking DMA is done
We used to poll vhost queue before making DMA is done, this is racy if vhost
thread were waked up before marking DMA is done which can result the signal to
be missed. Fix this by always polling the vhost thread before DMA is done.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 22:46:57 -04:00
Jason Wang
ce21a02913 vhost_net: determine whether or not to use zerocopy at one time
Currently, even if the packet length is smaller than VHOST_GOODCOPY_LEN, if
upend_idx != done_idx we still set zcopy_used to true and rollback this choice
later. This could be avoided by determining zerocopy once by checking all
conditions at one time before.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 22:46:57 -04:00
Jason Wang
c49e4e573b vhost: switch to use vhost_add_used_n()
Let vhost_add_used() to use vhost_add_used_n() to reduce the code
duplication. To avoid the overhead brought by __copy_to_user(). We will use
put_user() when one used need to be added.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 22:46:57 -04:00
Jason Wang
c92112aed3 vhost_net: use vhost_add_used_and_signal_n() in vhost_zerocopy_signal_used()
We tend to batch the used adding and signaling in vhost_zerocopy_callback()
which may result more than 100 used buffers to be updated in
vhost_zerocopy_signal_used() in some cases. So switch to use
vhost_add_used_and_signal_n() to avoid multiple calls to
vhost_add_used_and_signal(). Which means much less times of used index
updating and memory barriers.

2% performance improvement were seen on netperf TCP_RR test.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 22:46:57 -04:00
Jason Wang
094afe7d55 vhost_net: make vhost_zerocopy_signal_used() return void
None of its caller use its return value, so let it return void.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 22:46:57 -04:00
Jingoo Han
521a87cdae net: sunhme: use pci_{get,set}_drvdata()
Use the wrapper functions for getting and setting the driver data
using pci_dev instead of using dev_{get,set}_drvdata() with
&pdev->dev, so we can directly pass a struct pci_dev. This is
a purely cosmetic change.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 22:38:46 -04:00
Jingoo Han
1895499230 net: tulip: use pci_{get,set}_drvdata()
Use the wrapper functions for getting and setting the driver data
using pci_dev instead of using dev_{get,set}_drvdata() with
&pdev->dev, so we can directly pass a struct pci_dev. This is
a purely cosmetic change.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 22:38:46 -04:00
Jingoo Han
2c0c4fbe55 net: mdio-octeon: use platform_{get,set}_drvdata()
Use the wrapper functions for getting and setting the driver data
using platform_device instead of using dev_{get,set}_drvdata()
with &pdev->dev, so we can directly pass a struct platform_device.
This is a purely cosmetic change.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 22:38:46 -04:00
Jingoo Han
e04e37a88d net: sunhme: use platform_{get,set}_drvdata()
Use the wrapper functions for getting and setting the driver data
using platform_device instead of using dev_{get,set}_drvdata()
with &pdev->dev, so we can directly pass a struct platform_device.
This is a purely cosmetic change.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 22:38:45 -04:00
Jingoo Han
bc35383256 net: emac: use platform_{get,set}_drvdata()
Use the wrapper functions for getting and setting the driver data
using platform_device instead of using dev_{get,set}_drvdata()
with &pdev->dev, so we can directly pass a struct platform_device.
This is a purely cosmetic change.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 22:38:45 -04:00
Joe Perches
1372a298ea wireless: scan: Remove comment to compare_ether_addr
This function is being removed, so remove the reference to it.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 22:34:48 -04:00
Joe Perches
c3923b7a3d batman: Remove reference to compare_ether_addr
This function is being removed, rename the reference.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 22:34:48 -04:00
Joe Perches
951fd874c3 llc: Use normal etherdevice.h tests
Convert the llc_<foo> static inlines to the
equivalents from etherdevice.h and remove
the llc_<foo> static inline functions.

llc_mac_null -> is_zero_ether_addr
llc_mac_multicast -> is_multicast_ether_addr
llc_mac_match -> ether_addr_equal

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 22:34:47 -04:00
Joe Perches
7367d0b573 drivers/net: Convert uses of compare_ether_addr to ether_addr_equal
Use the new bool function ether_addr_equal to add
some clarity and reduce the likelihood for misuse
of compare_ether_addr for sorting.

Done via cocci script: (and a little typing)

$ cat compare_ether_addr.cocci
@@
expression a,b;
@@
-	!compare_ether_addr(a, b)
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	compare_ether_addr(a, b)
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!ether_addr_equal(a, b) == 0
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!ether_addr_equal(a, b) != 0
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	ether_addr_equal(a, b) == 0
+	!ether_addr_equal(a, b)

@@
expression a,b;
@@
-	ether_addr_equal(a, b) != 0
+	ether_addr_equal(a, b)

@@
expression a,b;
@@
-	!!ether_addr_equal(a, b)
+	ether_addr_equal(a, b)

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 22:28:04 -04:00
Liu Junliang
c9b37458e9 USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support
Signed-off-by: Liu Junliang <liujunliang_ljl@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 22:26:03 -04:00
Ajit Khaparde
a77dcb8c8f be2net: set and query VEB/VEPA mode of the PF interface
SkyHawk-R can support VEB or VEPA mode.
This patch will allow the user to set/query this switch setting.

Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 22:20:18 -04:00
Florian Fainelli
bc6fc9fa0e net: fix comment typo for __skb_alloc_pages()
The name of the function in the comment is __skb_alloc_page() while we
are actually commenting __skb_alloc_pages(). Fix this typo and make it
a valid kernel doc comment.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 22:17:40 -04:00
Claudiu Manoil
50ad076ba4 gianfar: Fix reported number of sent bytes to BQL
Fix the amount of sent bytes reported to BQL by reporting the
number of bytes on wire in the xmit routine, and recording that
value for each skb in order to be correctly confirmed on Tx
confirmation cleanup.

Reporting skb->len to BQL just before exiting xmit is not correct
due to possible insertions of TOE block and alignment bytes in the
skb->data, which are being stripped off by the controller before
transmission on wire.  This led to mismatch of (incorrectly)
reported bytes to BQL b/w xmit and Tx confirmation, resulting in
Tx timeout firing, for the h/w tx timestamping acceleration case.

There's no easy way to obtain the number of bytes on wire in the Tx
confirmation routine, so skb->cb is used to convey that information
from xmit to Tx confirmation, for now (as proposed by Eric). Revived
the currently unused GFAR_CB() construct for that purpose.

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 22:14:28 -04:00
Dan Aloni
7a163bfb7c netconsole: avoid a crash with multiple sysfs writers
When my 'ifup eth' script was fired multiple times and ran concurrent on
my laptop, for some obscure /etc scripting reason, it was revealed
that the store_enabled() function in netconsole doesn't handle it nicely,
as recorded by the Oops below (a syslog paste, but not mangled too much
to prevent from discerning the traceback).

On Linux 3.10.4, this patch seeks to remedy the problem, and it has been
running stable on my laptop for a few days.

[52608.609325] BUG: unable to handle kernel NULL pointer dereference at 00000000000003e0
[52608.609331] IP: [<ffffffff81532a17>] __netpoll_cleanup+0x27/0xe0
[52608.609339] PGD 15e51a067 PUD 15433e067 PMD 0
[52608.609343] Oops: 0000 [#1] SMP re firewire_ohci firewire_core crc_itu_t [last unloaded: kvm_intel]
[52608.609347] Modules linked in: kvm_intel tun vfat fat ppdev parport_pc parport fuse ipt_MASQUERADE usb_storage nf_conntrack_netbios_ns nf_conn [..garbled..]
[52608.609433] RAX: 0000000000000000 RBX: ffff880210bbcc68 RCX: 0000000000000000
[52608.609435] RDX: 0000000000000000 RSI: ffff8801ba447da0 RDI: ffff880210bbcc68
[52608.609437] RBP: ffff8801ba447e18 R08: 0000000000000000 R09: 0000000000000001
[52608.609439] R10: 000000000000000a R11: f000000000000000 R12: ffff880210bbcc68
[52608.609441] R13: ffff88020bc41000 R14: 0000000000000002 R15: 000000000000000200000000000
[52608.609443] FS:  00007f38d7bff740(0000) GS:ffff88021dc40000(0000) knlGS:0000000000000000
[52608.609446] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003300000000001427e0
[52608.609448] CR2: 00000000000003e0 CR3: 0000000154103000 CR4: 00000000001427e0
[52608.609450] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[52608.609452] netpoll: netconsole: local port 6665ess 10.0.0.27
[52608.609454] netpoll: netconsole: local IPv4 address 10.0.0.27
[52608.609456] netpoll: netconsole: interface 'em1'
[52608.609457] netpoll: netconsole: remote port 514ress 10.0.0.15
[52608.609459] netpoll: netconsole: remote IPv4 address 10.0.0.15:65:a8:9a:c7
[52608.609461] netpoll: netconsole: remote ethernet address 1c:6f:65:a8:9a:c7
[52608.609463] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[52608.609464] Stack:801ba447e08 ffff880210bbcc68 ffffffffffffffea ffff88020bc41000
[52608.609466]  ffff8801ba447e08 ffff880210bbcc68 ffffffffffffffea ffff88020bc41000
[52608.609471]  0000000000000002 0000000000000002 ffff8801ba447e38 ffffffff81532af4
[52608.609475]  0000000000000000 ffff880210bbcc00 ffff8801ba447e78 ffffffff81420e7c
[52608.609479] Call Trace:
[52608.609484]  [<ffffffff81532af4>] netpoll_cleanup+0x24/0x50
[52608.609489]  [<ffffffff81420e7c>] store_enabled+0x5c/0xe0
[52608.609492]  [<ffffffff81420abe>] netconsole_target_attr_store+0x2e/0x40
[52608.609498]  [<ffffffff811ff2a2>] configfs_write_file+0xd2/0x130
[52608.609503]  [<ffffffff81188f95>] vfs_write+0xc5/0x1f0
[52608.609506]  [<ffffffff81189482>] SyS_write+0x52/0xa0/0x10
[52608.609511]  [<ffffffff81628c2e>] ? do_page_fault+0xe/0x10
[52608.609516]  [<ffffffff8162d402>] system_call_fastpath+0x16/0x1b
[52608.609517] Code: 1f 44 00 00 0f 1f 44 00 00 55 48 89 e5 48 83 ec 30 4c 89 65 e0 48 89 5d d8 49 89 fc 4c 89 6d e8 4c 89 75 f0 4c 89 7d f8 48 8 [..garbled..]
[52608.609559] RIP  [<ffffffff81532a17>] __netpoll_cleanup+0x27/0xe0
[52608.609563]  RSP <ffff8801ba447de8>
[52608.609564] CR2: 00000000000003e0
[52608.609567] ---[ end trace d25ec343349b61d2 ]---

Signed-off-by: Dan Aloni <alonid@postram.com>
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 22:10:49 -04:00
Kouei Abe
fd9af07c34 sh_eth: Enable Rx descriptor word 0 shift for r8a7790
This corrects an oversight when r8a7790 support was added to sh_eth.

Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 22:02:33 -04:00
Kouei Abe
7db8e0c14c sh_eth: Fix cache invalidation omission of receive buffer
Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 22:02:32 -04:00
Veaceslav Falico
d3ab3ffd1d bonding: use rlb_client_info->vlan_id instead of ->tag
Store VID in ->vlan_id (if any), and remove the useless ->tag.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 22:02:32 -04:00
Veaceslav Falico
6f477d4201 bonding: remove bond_vlan_used()
We're using it currently to verify if we have vlans before getting the tag
from the skb we're about to send. It's useless because the vlan_get_tag()
verifies if the skb has the tag (and returns an error if not), and we can
receive tagged skbs only if we *already* have vlans.

Plus, the current RCUed implementation is kind of useless anyway - the we
can remove the last vlan in the moment we return from the function.

So remove the only usage of it and the whole function.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 22:02:32 -04:00
David S. Miller
c12a22428a Merge branch 'for-davem' of git://gitorious.org/linux-can/linux-can-next
Marc Kleine-Budde says:

====================
this is a pull request for net-next. There are two patches from Gerhard
Sittig, which improves the clock handling on mpc5121. Oliver Hartkopp
provides a patch that adds a per rule limitation of frame hops.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 21:54:02 -04:00
David S. Miller
e7abfe4092 Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
John W. Linville says:

====================
Please accept this batch of updates intended for the 3.12 stream.

For the mac80211 bits, Johannes says this:

"This time I have various improvements all over the place: IBSS, mesh,
testmode, AP client powersave handling, one of the rare rfkill patches
and some code cleanup."

Also for mac80211:

"And I also have some more changes for -next, just a few small fixes and
improvements, nothing really stands out."

And for iwlwifi:

"This time I have some powersave work (notably uAPSD support), CQM
offloads, support for a new firmware API and various code cleanups."

Regarding the Bluetooth bits, Gustavo says:

"Patches to 3.12, here we have:

* implementation of a proper tty_port for RFCOMM devices, this fixes some
issues people were seeing lately in the kernel.
* Add voice_setting option for SCO, it is used for SCO Codec selection
* bugfixes, small improvements and clean ups"

For the NFC bits, Samuel says:

"With this one we have:

- A few pn533 improvements and minor fixes. Testing our pn533 driver
  against Google's NCI stack triggered a few issues that we fixed now.
  We also added Tx fragmentation support to this driver.

- More NFC secure element handling. We added a GET_SE netlink command
  for getting all the discovered secure elements, and we defined 2
  additional secure element netlink event (transaction and connectivity).
  We also fixed a couple of typos and copy-paste bugs from the secure
  element handling code.

- Firmware download support for the pn544 driver. This chipset can enter a
  special mode where it's waiting for firmware blobs to replace the
  already flashed one. We now support that mode."

With repect to the ath tree, Kalle says:

"New features in ath10k are rx/tx checsumming in hw and survey scan
implemented by Michal. Also he made fixes to different areas of the
driver, most notable being fixing the case when using two streams and
reducing the number of interface combinations to avoid firmware crashes.
Bartosz did a clean related to how we handle SoC power save in PCI
layer.

For ath6kl Mohammed and Vasanth sent each a patch to fix two infrequent
crashes."

I also pulled the wireless tree into wireless-next to support a
request from Johannes.  On top of all that, there are the usual
sort of driver updates.  The mwifiex, brcmfmac, brcmsmac, ath9k,
and rt2x00 drivers all get some attention, as does the bcma bus and
a few other random bits here and there.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 21:45:31 -04:00
Daniel Borkmann
b1b72076b9 net: sctp: probe: allow more advanced ingress filtering by mark
This is a follow-up commit for commit b1dcdc68b1 ("net: tcp_probe:
allow more advanced ingress filtering by mark") that allows for
advanced SCTP probe module filtering based on skb mark (for a more
detailed description and advantages using mark, refer to b1dcdc68b1).
The current option to filter by a given port is still being preserved.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 21:44:11 -04:00
Tim Gardner
3e25c65ed0 net: neighbour: Remove CONFIG_ARPD
This config option is superfluous in that it only guards a call
to neigh_app_ns(). Enabling CONFIG_ARPD by default has no
change in behavior. There will now be call to __neigh_notify()
for each ARP resolution, which has no impact unless there is a
user space daemon waiting to receive the notification, i.e.,
the case for which CONFIG_ARPD was designed anyways.

Suggested-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Gao feng <gaofeng@cn.fujitsu.com>
Cc: Joe Perches <joe@perches.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 21:41:43 -04:00
Thomas Huth
4f49129be6 virtio-net: Set RXCSUM feature if GUEST_CSUM is available
If the VIRTIO_NET_F_GUEST_CSUM virtio feature is available, the guest
does not have to calculate the checksums on all received packets. This
is pretty much the same feature as RX checksum offloading on real
network cards, so the virtio-net driver should report this by setting
the NETIF_F_RXCSUM flag. When the user now runs "ethtool -k", he or she
can see whether the virtio-net interface has to calculate RX checksums
or not.

Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 21:36:41 -04:00
David S. Miller
61c8106e29 Merge branch 'addr_assign_type'
Bjørn Mork says:

====================
net: set addr_assign_type when inheriting a dev_addr

Copying the dev_addr from a parent device is an operation
common to a number of drivers. The addr_assign_type should
be updated accordingly, either by reusing the value from
the source device or explicitly indicating that the address
is stolen by setting addr_assign_type to NET_ADDR_STOLEN.

This patch set adds a helper copying both the dev_addr and
the addr_assign_type, and use this helper in drivers which
don't currently set the addr_assign_type. Using NET_ADDR_STOLEN
might be more appropriate in some of these cases.  Please
let me know, and I'll update the patch accordingly.

Changes in v2:
 - assuming addr_len == ETH_ALEN to allow optimized memcpy
 - dropped the vt6656 patch due to addr_len being unset in that driver
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 20:57:57 -04:00
Bjørn Mork
314cb11b49 staging: vt6655: inherit addr_assign_type along with dev_addr
A device inheriting a random or set address should reflect this in
its addr_assign_type.

Cc: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 20:57:50 -04:00
Bjørn Mork
d32a96e26a net: libertas: inherit addr_assign_type along with dev_addr
A device inheriting a random or set address should reflect this in
its addr_assign_type.

Acked-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 20:57:50 -04:00
Bjørn Mork
db181347e8 net: hostap: inherit addr_assign_type along with dev_addr
A device inheriting a random or set address should reflect this in
its addr_assign_type.

Cc: Jouni Malinen <j@w1.fi>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 20:57:49 -04:00
Bjørn Mork
252352cb5e net: airo: inherit addr_assign_type along with dev_addr
A device inheriting a random or set address should reflect this in
its addr_assign_type.

Acked-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 20:57:49 -04:00
Bjørn Mork
93af735736 net: team: inherit addr_assign_type along with dev_addr
A device inheriting a random or set address should reflect this in
its addr_assign_type.

Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 20:57:49 -04:00
Bjørn Mork
8b98604e39 net: macvlan: inherit addr_assign_type along with dev_addr
A device inheriting a random or set address should reflect this in
its addr_assign_type.

Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 20:57:49 -04:00
Bjørn Mork
2fcc800583 net: dsa: inherit addr_assign_type along with dev_addr
A device inheriting a random or set address should reflect this in
its addr_assign_type.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 20:57:49 -04:00
Bjørn Mork
6b93f4a1f2 net: vlan: inherit addr_assign_type along with dev_addr
A device inheriting a random or set address should reflect this in
its addr_assign_type.

Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 20:57:49 -04:00
Bjørn Mork
83a093b486 net: etherdevice: add address inherit helper
Some etherdevices inherit their address from a parent or
master device. The addr_assign_type should be updated along
with the address in these cases.  Adding a helper function
to simplify this.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03 20:57:49 -04:00
Cong Wang
5a17a390de net: make snmp_mib_free static inline
Fengguang reported:

   net/built-in.o: In function `in6_dev_finish_destroy':
   (.text+0x4ca7d): undefined reference to `snmp_mib_free'

this is due to snmp_mib_free() is defined when CONFIG_INET is enabled,
but in6_dev_finish_destroy() is now moved to core kernel.

I think snmp_mib_free() is small enough to be inlined, so just make it
static inline.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-02 21:00:50 -07:00
Cong Wang
660d98cae0 vxlan: include net/ip6_checksum.h for csum_ipv6_magic()
Fengguang reported a compile warning:

   drivers/net/vxlan.c: In function 'vxlan6_xmit_skb':
   drivers/net/vxlan.c:1352:3: error: implicit declaration of function 'csum_ipv6_magic' [-Werror=implicit-function-declaration]
   cc1: some warnings being treated as errors

this patch fixes it.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-02 21:00:49 -07:00
Cong Wang
8c1bb79fde vxlan: fix flowi6_proto value
It should be IPPROTO_UDP.

Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-02 21:00:47 -07:00