When the driver is in switchdev mode and rx-gro-hw is set, the RQ needs
special CQE handling. Till then, block setting of rx-gro-hw feature in
switchdev mode, to avoid failure while setting the feature due to
failure while opening the RQ.
Fixes: f97d5c2a45 ("net/mlx5e: Add handle SHAMPO cqe support")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The body of mlx5e_napi_poll is wrapped into rcu_read_lock to be able to
read the XDP program pointer using rcu_dereference. However, the trap RQ
NAPI doesn't use rcu_read_lock, because the trap RQ works only in the
non-linear mode, and mlx5e_skb_from_cqe_nonlinear, until recently,
didn't support XDP and didn't call rcu_dereference.
Starting from the cited commit, mlx5e_skb_from_cqe_nonlinear supports
XDP and calls rcu_dereference, but mlx5e_trap_napi_poll doesn't wrap it
into rcu_read_lock. It leads to RCU-lockdep warnings like this:
WARNING: suspicious RCU usage
This commit fixes the issue by adding an rcu_read_lock to
mlx5e_trap_napi_poll, similarly to mlx5e_napi_poll.
Fixes: ea5d49bdae ("net/mlx5e: Add XDP multi buffer support to the non-linear legacy RQ")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When modifying TTL, packet's csum has to be recalculated.
Due to HW issue in ConnectX-5, csum recalculation for modify
TTL on RX is supported through a work-around that is specifically
enabled by configuration.
If the work-around isn't enabled, rather than adding an unsupported
action the modify TTL action on RX should be ignored.
Ignoring modify TTL action might result in zero actions, so in such
cases we will not convert the match STE to modify STE, as it is done
by FW in DMFS.
This patch fixes an issue where modify TTL action was ignored both
on RX and TX instead of only on RX.
Fixes: 4ff725e1d4 ("net/mlx5: DR, Ignore modify TTL if device doesn't support it")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In order to support multiple destination FTEs with SW steering
FW table is created with single FTE with multiple actions and
SW steering rule forward to it. When creating this table, flow
source isn't set according to the original FTE.
Fix this by passing the original FTE flow source to the created
FW table.
Fixes: 34583beea4 ("net/mlx5: DR, Create multi-destination table for SW-steering use")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Fix following coccicheck error:
./sound/usb/endpoint.c:1671:8-10: ERROR: reference preceded by free on line 1671.
Here should be 'cp' rather than 'ip'.
Fixes: c11117b634 ("ALSA: usb-audio: Refcount multiple accesses on the single clock")
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20220518021617.10114-1-wanjiabing@vivo.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In commit d72d827f2f, I used 'cpumask_t' incorrectly:
void iscsit_thread_get_cpumask(struct iscsi_conn *conn)
{
int ord, cpu;
cpumask_t conn_allowed_cpumask;
......
}
static ssize_t lio_target_wwn_cpus_allowed_list_store(
struct config_item *item, const char *page, size_t count)
{
int ret;
char *orig;
cpumask_t new_allowed_cpumask;
......
}
The correct pattern should be as follows:
cpumask_var_t mask;
if (!zalloc_cpumask_var(&mask, GFP_KERNEL))
return -ENOMEM;
... use 'mask' here ...
free_cpumask_var(mask);
Link: https://lore.kernel.org/r/20220516054721.1548-1-mingzhe.zou@easystack.cn
Fixes: d72d827f2f ("scsi: target: Add iscsi/cpus_allowed_list in configfs")
Reported-by: Test Bot <zgrieee@gmail.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
1.In current process, all bio will set the BIO_THROTTLED flag
after __blk_throtl_bio().
2.If bio needs to be throttled, it will start the timer and
stop submit bio directly. Bio will submit in
blk_throtl_dispatch_work_fn() when the timer expires.But in
the current process, if bio is throttled. The BIO_THROTTLED
will be set to bio after timer start. If the bio has been
completed, it may cause use-after-free blow.
BUG: KASAN: use-after-free in blk_throtl_bio+0x12f0/0x2c70
Read of size 2 at addr ffff88801b8902d4 by task fio/26380
dump_stack+0x9b/0xce
print_address_description.constprop.6+0x3e/0x60
kasan_report.cold.9+0x22/0x3a
blk_throtl_bio+0x12f0/0x2c70
submit_bio_checks+0x701/0x1550
submit_bio_noacct+0x83/0xc80
submit_bio+0xa7/0x330
mpage_readahead+0x380/0x500
read_pages+0x1c1/0xbf0
page_cache_ra_unbounded+0x471/0x6f0
do_page_cache_ra+0xda/0x110
ondemand_readahead+0x442/0xae0
page_cache_async_ra+0x210/0x300
generic_file_buffered_read+0x4d9/0x2130
generic_file_read_iter+0x315/0x490
blkdev_read_iter+0x113/0x1b0
aio_read+0x2ad/0x450
io_submit_one+0xc8e/0x1d60
__se_sys_io_submit+0x125/0x350
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Allocated by task 26380:
kasan_save_stack+0x19/0x40
__kasan_kmalloc.constprop.2+0xc1/0xd0
kmem_cache_alloc+0x146/0x440
mempool_alloc+0x125/0x2f0
bio_alloc_bioset+0x353/0x590
mpage_alloc+0x3b/0x240
do_mpage_readpage+0xddf/0x1ef0
mpage_readahead+0x264/0x500
read_pages+0x1c1/0xbf0
page_cache_ra_unbounded+0x471/0x6f0
do_page_cache_ra+0xda/0x110
ondemand_readahead+0x442/0xae0
page_cache_async_ra+0x210/0x300
generic_file_buffered_read+0x4d9/0x2130
generic_file_read_iter+0x315/0x490
blkdev_read_iter+0x113/0x1b0
aio_read+0x2ad/0x450
io_submit_one+0xc8e/0x1d60
__se_sys_io_submit+0x125/0x350
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 0:
kasan_save_stack+0x19/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x1b/0x30
__kasan_slab_free+0x111/0x160
kmem_cache_free+0x94/0x460
mempool_free+0xd6/0x320
bio_free+0xe0/0x130
bio_put+0xab/0xe0
bio_endio+0x3a6/0x5d0
blk_update_request+0x590/0x1370
scsi_end_request+0x7d/0x400
scsi_io_completion+0x1aa/0xe50
scsi_softirq_done+0x11b/0x240
blk_mq_complete_request+0xd4/0x120
scsi_mq_done+0xf0/0x200
virtscsi_vq_done+0xbc/0x150
vring_interrupt+0x179/0x390
__handle_irq_event_percpu+0xf7/0x490
handle_irq_event_percpu+0x7b/0x160
handle_irq_event+0xcc/0x170
handle_edge_irq+0x215/0xb20
common_interrupt+0x60/0x120
asm_common_interrupt+0x1e/0x40
Fix this by move BIO_THROTTLED set into the queue_lock.
Signed-off-by: Laibin Qiu <qiulaibin@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220301123919.2381579-1-qiulaibin@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Added support for adaptive IRQ coalescing. It uses net_dim
algorithm to find the suitable delay/IRQ count based on the
current packet rate.
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Link: https://lore.kernel.org/r/20220517044055.876158-1-sumang@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are sleep in atomic context bugs when the request to secure
element of st-nci is timeout. The root cause is that nci_skb_alloc
with GFP_KERNEL parameter is called in st_nci_se_wt_timeout which is
a timer handler. The call paths that could trigger bugs are shown below:
(interrupt context 1)
st_nci_se_wt_timeout
nci_hci_send_event
nci_hci_send_data
nci_skb_alloc(..., GFP_KERNEL) //may sleep
(interrupt context 2)
st_nci_se_wt_timeout
nci_hci_send_event
nci_hci_send_data
nci_send_data
nci_queue_tx_data_frags
nci_skb_alloc(..., GFP_KERNEL) //may sleep
This patch changes allocation mode of nci_skb_alloc from GFP_KERNEL to
GFP_ATOMIC in order to prevent atomic context sleeping. The GFP_ATOMIC
flag makes memory allocation operation could be used in atomic context.
Fixes: ed06aeefda ("nfc: st-nci: Rename st21nfcb to st-nci")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220517012530.75714-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use TOD_READ_SECONDARY for extts to keep TOD_READ_PRIMARY
for gettime and settime exclusively. Before this change,
TOD_READ_PRIMARY was used for both extts and gettime/settime,
which would result in changing TOD read/write triggers between
operations. Using TOD_READ_SECONDARY would make extts
independent of gettime/settime operation
Signed-off-by: Min Li <min.li.xe@renesas.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/1652712427-14703-1-git-send-email-min.li.xe@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the following coccicheck warning:
drivers/net/ethernet/smsc/smc911x.c:483:20-22: WARNING opportunity for min()
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Link: https://lore.kernel.org/r/20220516115627.66363-1-guozhengkui@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guangguan Wang says:
====================
net/smc: send and write inline optimization for smc
Send cdc msgs and write data inline if qp has sufficent inline
space, helps latency reducing.
In my test environment, which are 2 VMs running on the same
physical host and whose NICs(ConnectX-4Lx) are working on
SR-IOV mode, qperf shows 0.4us-1.3us improvement in latency.
Test command:
server: smc_run taskset -c 1 qperf
client: smc_run taskset -c 1 qperf <server ip> -oo \
msg_size:1:2K:*2 -t 30 -vu tcp_lat
The results shown below:
msgsize before after
1B 11.9 us 10.6 us (-1.3 us)
2B 11.7 us 10.7 us (-1.0 us)
4B 11.7 us 10.7 us (-1.0 us)
8B 11.6 us 10.6 us (-1.0 us)
16B 11.7 us 10.7 us (-1.0 us)
32B 11.7 us 10.6 us (-1.1 us)
64B 11.7 us 11.2 us (-0.5 us)
128B 11.6 us 11.2 us (-0.4 us)
256B 11.8 us 11.2 us (-0.6 us)
512B 11.8 us 11.3 us (-0.5 us)
1KB 11.9 us 11.5 us (-0.4 us)
2KB 12.1 us 11.5 us (-0.6 us)
====================
Link: https://lore.kernel.org/r/20220516055137.51873-1-guangguan.wang@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rdma write with inline flag when sending small packages,
whose length is shorter than the qp's max_inline_data, can
help reducing latency.
In my test environment, which are 2 VMs running on the same
physical host and whose NICs(ConnectX-4Lx) are working on
SR-IOV mode, qperf shows 0.5us-0.7us improvement in latency.
Test command:
server: smc_run taskset -c 1 qperf
client: smc_run taskset -c 1 qperf <server ip> -oo \
msg_size:1:2K:*2 -t 30 -vu tcp_lat
The results shown below:
msgsize before after
1B 11.2 us 10.6 us (-0.6 us)
2B 11.2 us 10.7 us (-0.5 us)
4B 11.3 us 10.7 us (-0.6 us)
8B 11.2 us 10.6 us (-0.6 us)
16B 11.3 us 10.7 us (-0.6 us)
32B 11.3 us 10.6 us (-0.7 us)
64B 11.2 us 11.2 us (0 us)
128B 11.2 us 11.2 us (0 us)
256B 11.2 us 11.2 us (0 us)
512B 11.4 us 11.3 us (-0.1 us)
1KB 11.4 us 11.5 us (0.1 us)
2KB 11.5 us 11.5 us (0 us)
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Tested-by: kernel test robot <lkp@intel.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As cdc msg's length is 44B, cdc msgs can be sent inline in
most rdma devices, which can help reducing sending latency.
In my test environment, which are 2 VMs running on the same
physical host and whose NICs(ConnectX-4Lx) are working on
SR-IOV mode, qperf shows 0.4us-0.7us improvement in latency.
Test command:
server: smc_run taskset -c 1 qperf
client: smc_run taskset -c 1 qperf <server ip> -oo \
msg_size:1:2K:*2 -t 30 -vu tcp_lat
The results shown below:
msgsize before after
1B 11.9 us 11.2 us (-0.7 us)
2B 11.7 us 11.2 us (-0.5 us)
4B 11.7 us 11.3 us (-0.4 us)
8B 11.6 us 11.2 us (-0.4 us)
16B 11.7 us 11.3 us (-0.4 us)
32B 11.7 us 11.3 us (-0.4 us)
64B 11.7 us 11.2 us (-0.5 us)
128B 11.6 us 11.2 us (-0.4 us)
256B 11.8 us 11.2 us (-0.6 us)
512B 11.8 us 11.4 us (-0.4 us)
1KB 11.9 us 11.4 us (-0.5 us)
2KB 12.1 us 11.5 us (-0.6 us)
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Tested-by: kernel test robot <lkp@intel.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
test_bit() tests if one bit is set or not.
Here the logic seems to check of bit QL_RESET_PER_SCSI (i.e. 4) OR bit
QL_RESET_START (i.e. 3) is set.
In fact, it checks if bit 7 (4 | 3 = 7) is set, that is to say
QL_ADAPTER_UP.
This looks harmless, because this bit is likely be set, and when the
ql_reset_work() delayed work is scheduled in ql3xxx_isr() (the only place
that schedule this work), QL_RESET_START or QL_RESET_PER_SCSI is set.
This has been spotted by smatch.
Fixes: 5a4faa8737 ("[PATCH] qla3xxx NIC driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/80e73e33f390001d9c0140ffa9baddf6466a41a2.1652637337.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These interconnects are modeled as clks, not interconnects, therefore
remove the compatibles from the binding as they're unused.
Cc: Alex Elder <elder@linaro.org>
Cc: Taniya Das <quic_tdas@quicinc.com>
Cc: Mike Tipton <quic_mdtipton@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220415005828.1980055-3-swboyd@chromium.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This patch set is to address two clock rate setting issues.
The first patch is to fix a potential cached clock rate mismatching
issue, the issue can lead to the clock rate is missed to be set. Note,
since this potential issue requires specific time window and certain
condition (consumers need to request the same bandwidth) to produce,
the patch is based on analysis but not a real trace log.
The second patch is an extension to cache clock rates for active and
sleep clocks separately, with this change it gives us possibility to set
active and sleep clock with different clock rates.
* icc-rpm
interconnect: qcom: icc-rpm: Fix for cached clock rate
interconnect: qcom: icc-rpm: Cache every clock rate
Link: https://lore.kernel.org/r/20220416031029.693211-1-leo.yan@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This contains a few fixes for the sc8180x interconnect provider driver to make
it functional.
* icc-sc8180x
dt-bindings: interconnect: Add SC8180X QUP0 virt provider
interconnect: qcom: sc8180x: Modernize sc8180x probe
interconnect: qcom: sc8180x: Fix QUP0 nodes
interconnect: qcom: sc8180x: Mark some BCMs keepalive
Link: https://lore.kernel.org/r/20220503211925.1022169-1-bjorn.andersson@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The Qualcomm interconnect providers started off defining nodes and BCMs
using the DEFINE_QNODE() and DEFINE_QBCM() macros. Unfortunately this
results in a block of long lines that are hard to read, a transition to
explicitly stated definition has been made for newly introduced
platforms.
Transition the SC8180X interconnect provider driver to this style as
well, to make it easier to read while debugging interconnect related
issues.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220503225300.1141814-1-bjorn.andersson@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The QUP0 BCM relates to some internal property of the QUPs, and should
be configured independently of the path to the QUP. In line with other
platforms expose QUP_CORE endpoints in order allow this configuration.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220503211925.1022169-4-bjorn.andersson@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The introduction of the Qualcomm SC8180X provider raced with the
refactoring of the RPMh common code and SC8180X was left with the old
style of duplicating the probe function in each provider driver.
Transition the driver to the "new" design.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220503211925.1022169-3-bjorn.andersson@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add compatible for the QUP0 BCM provider found in SC8180X.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220503211925.1022169-2-bjorn.andersson@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=5giZ
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.18-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Avoid putting Elo i2 PCIe Ports in D3cold because downstream devices
are inaccessible after going back to D0 (Rafael J. Wysocki)
- Qualcomm SM8250 has a ddrss_sf_tbu clock but SC8180X does not; make a
SC8180X-specific config without the clock so it probes correctly
(Bjorn Andersson)
- Revert aardvark chained IRQ handler rewrite because it broke
interrupt affinity (Pali Rohár)
* tag 'pci-v5.18-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI: aardvark: Rewrite IRQ code to chained IRQ handler"
PCI: qcom: Remove ddrss_sf_tbu clock from SC8180X
PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold
Fix up a recent change in the int340x thermal driver that inadvertently
broke thermal zone handling on some systems (Srinivas Pandruvada).
-----BEGIN PGP SIGNATURE-----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=41e0
-----END PGP SIGNATURE-----
Merge tag 'thermal-5.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Fix up a recent change in the int340x thermal driver that
inadvertently broke thermal zone handling on some systems
(Srinivas Pandruvada)"
* tag 'thermal-5.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: int340x: Mode setting with new OS handshake
Implement compat_setup_rt_frame for sigcontext save & restore. The
main process is the same with signal, but the rv32 pt_regs' size
is different from rv64's, so we needs convert them.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20220405071314.3225832-19-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The code attempts to free the 'new' pointer using kmem_cache_free(),
which is wrong because this function isn't responsible of freeing it.
Instead, the function should free new->htable and clear the contents of
*new (to prevent double-free).
Cc: stable@vger.kernel.org
Fixes: c7c556f1e8 ("selinux: refactor changing booleans")
Reported-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
clock bindings.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmKD9AQQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgY0aB/94ZFYX6dtuQkxs0XP7zVm5RMMQRAVTVFOl
VsaDsEJ3ZzOJrGvb/buUXrd7+iuhFTfnyVHIqbdritbMgu+RUn0XFkIVBYuo+u+J
WxsZUIFM2Clk/+wX7lzJgUWIAeyFLkw0g3NOlN0tYU5LJd+7C7OtUALyloTwNBND
XVt/GBuIzxcQSOXXkYn6U7yCWpzrGf9wEy0P8tItLJVt/1HkZBomETsPbMoY9i6b
P/jiT8whkLguFFYqujAXDHrqjMNUQg6oXSXoja+ul3X7cPCLDPLincojebrw3qc7
tkpYVJVdE1CuwPv4KKPIpG8WFvOVwbETMvlkzTG9oUWoxfVyZfv6
=aYRg
-----END PGP SIGNATURE-----
Merge tag 'v5.19-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-rockchip
Pull Rockchip clk driver updates from Heiko Stuebner:
Conversion from txt to Yaml for a number of Rockchip
clock bindings.
Some fixes for recent yaml conversion of clock bindinds
and making the hclk_vo critical for rk3568.
* tag 'v5.19-rockchip-clk2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
dt-bindings: clock: convert rockchip,rk3368-cru.txt to YAML
dt-bindings: clock: convert rockchip,rk3228-cru.txt to YAML
dt-bindings: clock: convert rockchip,rk3036-cru.txt to YAML
dt-bindings: clock: convert rockchip,rk3308-cru.txt to YAML
dt-bindings: clock: convert rockchip,px30-cru.txt to YAML
dt-bindings: clock: convert rockchip,rk3188-cru.txt to YAML
dt-bindings: clock: convert rockchip,rk3288-cru.txt to YAML
dt-bindings: clock: convert rockchip,rv1108-cru.txt to YAML
dt-binding: clock: Add missing rk3568 cru bindings
clk: rockchip: Mark hclk_vo as critical on rk3568
dt-bindings: clock: fix rk3399 cru clock issues
dt-bindings: clock: use generic node name for pmucru example in rockchip,rk3399-cru.yaml
dt-bindings: clock: replace a maintainer for rockchip,rk3399-cru.yaml
dt-bindings: clock: fix some conversion style issues for rockchip,rk3399-cru.yaml
The PCA85073A RTC has the same programming model as the PCF85063A.
Add a compatible entry for it.
Tested on a custom i.MX6SX based board.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220419014445.341444-2-festevam@gmail.com
The PCA85073A RTC has the same programming model as the PCF85063A.
Add a compatible entry for it.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220419014445.341444-1-festevam@gmail.com
Add generic support for try_cmpxchg64{,_acquire,_release,_relaxed}
and their falbacks involving cmpxchg64.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220515184205.103089-2-ubizjak@gmail.com
There's two problems with the current amd_brs_adjust_period() code:
- it isn't in fact AMD specific and wil always adjust the period;
- it adjusts the period, while it should only adjust the event count,
resulting in repoting a short period.
Fix this by using x86_pmu.limit_period, this makes it specific to the
AMD BRS case and ensures only the event count is adjusted while the
reported period is unmodified.
Fixes: ba2fe75008 ("perf/x86/amd: Add AMD branch sampling period adjustment")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
With the kmalloc() size annotations, GCC is smart enough to realize that
LKDTM is intentionally writing past the end of the buffer. This is on
purpose, of course, so hide the buffer from the optimizer. Silences:
../drivers/misc/lkdtm/heap.c: In function 'lkdtm_SLAB_LINEAR_OVERFLOW':
../drivers/misc/lkdtm/heap.c:59:13: warning: array subscript 256 is outside array bounds of 'void[1020]' [-Warray-bounds]
59 | data[1024 / sizeof(u32)] = 0x12345678;
| ~~~~^~~~~~~~~~~~~~~~~~~~
In file included from ../drivers/misc/lkdtm/heap.c:7:
In function 'kmalloc',
inlined from 'lkdtm_SLAB_LINEAR_OVERFLOW' at ../drivers/misc/lkdtm/heap.c:54:14:
../include/linux/slab.h:581:24: note: at offset 1024 into object of size 1020 allocated by 'kmem_cache_alloc_trace'
581 | return kmem_cache_alloc_trace(
| ^~~~~~~~~~~~~~~~~~~~~~~
582 | kmalloc_caches[kmalloc_type(flags)][index],
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
583 | flags, size);
| ~~~~~~~~~~~~
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Add config options which are needed for LKDTM sub-tests:
STACKLEAK_ERASING test needs GCC_PLUGIN_STACKLEAK config.
READ_AFTER_FREE and READ_BUDDY_AFTER_FREE tests need
INIT_ON_FREE_DEFAULT_ON config.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220517132932.1484719-1-usama.anjum@collabora.com
Add coverage for the recently added usercopy checks for vmalloc and
folios, via USERCOPY_VMALLOC and USERCOPY_FOLIO respectively.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
