This reverts commit 110860541f.
Converting the "secretmem_users" counter to a refcount is incorrect,
because a refcount is special in zero and can't just be incremented (but
a count of users is not, and "no users" is actually perfectly valid and
not a sign of a free'd resource).
Reported-by: syzbot+75639e6a0331cd61d3e2@syzkaller.appspotmail.com
Cc: Jordy Zomer <jordy@pwning.systems>
Cc: Kees Cook <keescook@chromium.org>,
Cc: Jordy Zomer <jordy@jordyzomer.github.io>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull autofs fix from Al Viro:
"Fix for a braino of mine (in getting rid of open-coded
dentry_path_raw() in autofs a couple of cycles ago).
Mea culpa... Obvious -stable fodder"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
autofs: fix wait name hash calculation in autofs_wait()
'iface_clk' clock is not used by the
qcom, bam_dma driver, so remove the same from 'ipq6018' dts.
This is a preparatory patch for subsequent patch in
this series which converts the qcom_bam_dma device-tree
binding into YAML format.
Without this change, 'make dtbs_check' leads to the following
error:
$ arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml:
dma-controller@7984000: clock-names: ['iface_clk', 'bam_clk']
is too long
Fix the same.
Cc: Thara Gopinath <thara.gopinath@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211013105541.68045-4-bhupesh.sharma@linaro.org
'qcom,config-pipe-trust-reg' property doesn't seem to be
used by the qcom, bam_dma driver, so remove the same
from 'ipq6018' dts.
This is a preparatory patch for subsequent patch in
this series which converts the qcom_bam_dma device-tree
binding into YAML format.
Without this change, 'make dtbs_check' leads to the following
error:
$ arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml:
dma-controller@704000: 'qcom,config-pipe-trust-reg' does not match
any of the regexes: 'pinctrl-[0-9]+'
Fix the same.
Cc: Thara Gopinath <thara.gopinath@linaro.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211013105541.68045-3-bhupesh.sharma@linaro.org
For some reason apq8016-sbc, apq8096-db820c, msm8916-mtp and msm8996-mtp
were added as separate .dts and .dtsi files where the first only contains
the model name and the latter contains most of the actual definitions.
Perhaps this was done with the expectation that there would be other
devices also making use of exactly the same. However, this has not
been the case until now and it also seems unlikely in the future.
Having the extra .dtsi only clutters the file list and provides
little benefit.
Move the contents of the .dtsi into the .dts file to make this consistent
with most other devices that simply define everything in the .dts.
There are no functional changes introduced by this patch:
The compiled ".dtb"s are completely identical.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211018133656.32649-1-stephan@gerhold.net
SMEM can now be described directly in the reserved-memory.
This is mainly meant for newer SoCs where there is only one SMEM
region. However, even on older SoCs like MSM8916 there is clearly one
main SMEM region (described by "memory-region") that holds the
smem_header and one special extra region used only for data of the
RPM ("qcom,rpm-msg-ram").
The definition in reserved-memory also looks cleaner for older SoCs,
so make use of that in MSM8916 as well.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211018110009.30837-2-stephan@gerhold.net
According to the new DT schema for qcom,rpm-msg-ram the node name
should be sram@. memory@ is reserved for definition of physical RAM
(usable by Linux).
This fixes the following dtbs_check error on various device trees:
memory@60000: 'device_type' is a required property
From schema: dtschema/schemas/memory.yaml
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211018110009.30837-1-stephan@gerhold.net
This device has MPU-6515 imu and Asahi Kasei AK09911 magnetometer,
Add support for it.
Signed-off-by: J.R. Divya Antony <d.antony.jr@gmail.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211012112735.2765-3-d.antony.jr@gmail.com
Add support for touchscreen in this device.
Signed-off-by: J.R. Divya Antony <d.antony.jr@gmail.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211012112735.2765-1-d.antony.jr@gmail.com
The change corrects the described bus clock of the QCE.
Fixes: 3e482859f1 ("dts: qcom: sdm845: Add dt entries to support crypto engine.")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211011095534.1580406-1-vladimir.zapolskiy@linaro.org
The change adds description of Qualcomm crypto engine controller and
BAM associated with it. The change is inspired by commit 3e482859f1
("dts: qcom: sdm845: Add dt entries to support crypto engine.")
While performance of cryptographic algorithms executed on QCE is lower
than e.g. ones tinkered for ARM NEON, the offloaded execution would
make sense:
# cryptsetup benchmark | grep aes
aes-cbc 128b 71.0 MiB/s 71.9 MiB/s
aes-cbc 256b 62.4 MiB/s 62.4 MiB/s
aes-xts 256b 70.7 MiB/s 70.8 MiB/s
aes-xts 512b 62.0 MiB/s 63.3 MiB/s
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Cc: Thara Gopinath <thara.gopinath@linaro.org>
Acked-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211011094822.1580122-1-vladimir.zapolskiy@linaro.org
Although the early NXP NCI NFC bindings required the clock-frequency
property, it was never used by the driver and it is actually a property
of I2C bus, not I2C slave.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211011073143.32645-1-krzysztof.kozlowski@canonical.com
This device has MPU-6515 imu and Asahi Kasei AK09911 magnetometer.
Add support for it.
Signed-off-by: J.R. Divya Antony <d.antony.jr@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211010033750.15204-1-d.antony.jr@gmail.com
Add support for the Venus video decoder/encoder but leave it disabled
by default; it is expected to eventually get enabled in each machine
specific DT, where required.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211008102119.268869-3-angelogioacchino.delregno@collabora.com
This string- and electrical configuration depend on the board and panel,
and should hence not be defined generically for every user of pm660l.
SoMainline will pick this configuration again when enabling WLED on the
Sony Nile platform.
Fixes: 7b56a804e5 ("arm64: dts: qcom: pm660l: Add WLED support")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007213400.258371-14-marijn.suijten@somainline.org
The number of WLED strings used by a certain platform depend on the
panel connected to that board and may not be the same for every user of
pmi8994.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007213400.258371-13-marijn.suijten@somainline.org
The driver now sets an appropriate default for WLED4 (and WLED5) just
like WLED3 making this linear array from 0-3 redundant. In addition the
driver is now able to parse arrays of variable length solving the "all
four strings *have to* be defined" comment.
Besides the driver will now warn when both properties are specified to
prevent ambiguity: the length of the array is enough to imply a set
number of strings.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007213400.258371-12-marijn.suijten@somainline.org
The property is named "qcom,external-pfet", as found by
dt_binding_check:
'qcom,eternal-pfet' does not match any of the regexes
Fixes: 37aa540cbd ("arm64: dts: qcom: pmi8994: Add WLED node")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007213400.258371-11-marijn.suijten@somainline.org
Herobrine is a Chrome OS board/platform based on the QCA SC7280.
Add a .dtsi for the platform parts and a .dts for the board
specific bits. Currently the .dtsi has everything except the
compatible strings, things will likely get shuffled around in the
future as we learn more about the differences between boards.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007140854.1.I70615769f27bbaf7e480419d0f660f802b1fea43@changeid
The 'interrupt-map' in several QCom SoCs is malformed. The '#address-cells'
size of the parent interrupt controller (the GIC) is not accounted for.
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210928192210.1842377-1-robh@kernel.org
Per QMP PHY bindings schema, 'vdda-phy-supply' and 'vdda-phy-supply' are
required for IPQ8074 QMP USB3 PHY. Since supplies are not added in DTS
for this platform, add a dummy regulator as the supply to QMP USB3 PHY,
so that dtbs_check stops complaining the missing supplies.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-10-shawn.guo@linaro.org
IPQ8074 PCIe PHY nodes are broken in the many ways:
- '#address-cells', '#size-cells' and 'ranges' are missing.
- Child phy/lane node is missing, and the child properties like
'#phy-cells' and 'clocks' are mistakenly put into parent node.
- The clocks properties for parent node are missing.
Fix them to get the nodes comply with the bindings schema.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-9-shawn.guo@linaro.org
'vdda-phy-supply' and 'vdda-pll-supply' are required properties. Add
them to fix the dtbs_check warnings below.
phy@1da7000: 'vdda-phy-supply' is a required property
arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml
phy@1da7000: 'vdda-pll-supply' is a required property
arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-8-shawn.guo@linaro.org
The 'reg-names' is not a supported/used property. Drop it from QMP PHY
nodes to fix dtbs_check warnings like below.
phy-wrapper@88e9000: 'reg-names' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/sm8350-hdk.dt.yaml
arch/arm64/boot/dts/qcom/sm8350-mtp.dt.yaml
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-7-shawn.guo@linaro.org
The following properties are not supported and causing dtbs_check
warnings.
- vdda-phy-max-microamp
- vdda-pll-max-microamp
- vddp-ref-clk-max-microamp
- vddp-ref-clk-always-on
Drop them from QMP PHY nodes.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-6-shawn.guo@linaro.org
Many child nodes of QMP PHY are named without following bindings schema
and causing dtbs_check warnings like below.
phy@1c06000: 'lane@1c06800' does not match any of the regexes: '^phy@[0-9a-f]+$'
arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dt.yaml
arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dt.yaml
Correct them to fix the warnings.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-5-shawn.guo@linaro.org
'#clock-cells' is a required property of QMP PHY child node, not itself.
Move it to fix the dtbs_check warnings.
There are only '#clock-cells' removal from SM8350 QMP PHY nodes, because
child nodes already have the property.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-4-shawn.guo@linaro.org
Add 200MHz OPP in qspi_opp_table
Signed-off-by: Rajesh Patil <rajpat@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1632892123-11006-1-git-send-email-rajpat@codeaurora.org
The RTC on the pmk8350 is not useful on all boards. Some boards may
not provide backup power to the PMIC but might have another RTC on the
board that does have backup power. In this case it's better to not use
the RTC on the PMIC.
At the moment, the only boards that includes this PMIC are sc7280-idp
and sc7280-idp2. On sc7280-idp I'm not aware of any other RTCs, but
sc7280-idp2 has a Chrome OS EC on it and this is intended to provide
the RTC for the AP.
Let's do what we normally do for hardware that's not used by all
boards and set it to a default status of "disabled" and then enable it
on the boards that need it.
NOTE: for sc7280-idp it's _possible_ we might also want to add
`allow-set-time;`. That could be the subject of a future patch if it
is indeed true.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Satya Priya <skakit@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
[bjorn: Enable the RTC on the MTP as well]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929153553.1.Ib44c2ac967833d7a3f51452d44d15b7b8d23c1f0@changeid
Add node to support the QUP5 I2C controller inside of IPQ8074.
It is exactly the same as QUP2 controllers.
Some routers like ZTE MF269 use this bus.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211001145421.18302-1-amadeus@jmu.edu.cn
Fix following coccicheck warning:
./drivers/soc/qcom/smp2p.c:501:1-33: WARNING: Function
for_each_available_child_of_node should have of_node_put() before goto
Early exits from for_each_available_child_of_node should decrement the
node reference counter.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211014062350.8942-1-wanjiabing@vivo.com
Fix following coccicheck warning:
./drivers/soc/qcom/apr.c:485:1-23: WARNING: Function
for_each_child_of_node should have of_node_put() before return
Early exits from for_each_child_of_node should decrement the
node reference counter.
Fixes: 8347356626 ("soc: qcom: apr: Add avs/audio tracking functionality")
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211014083017.19714-1-wanjiabing@vivo.com
Rename thermal zones according to dt-schema.
Fix warnings like:
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml: thermal-zones: 'cpu-thermal0', 'cpu-thermal1', 'cpu-thermal2', 'cpu-thermal3' do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/thermal/thermal-zones.yaml
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211020180002.195467-1-david@ixit.cz
-----BEGIN PGP SIGNATURE-----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=z6Fz
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v5.15_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
"Reset clang's Shadow Call Stack on hotplug to prevent it from
overflowing"
* tag 'sched_urgent_for_v5.15_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/scs: Reset the shadow stack when idle_task_exit
-----BEGIN PGP SIGNATURE-----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=iEPb
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.15_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
"A single change adding Dave Hansen to our maintainers team"
* tag 'x86_urgent_for_v5.15_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Add Dave Hansen to the x86 maintainer team
-----BEGIN PGP SIGNATURE-----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=FhM8
-----END PGP SIGNATURE-----
Merge tag '5.15-rc6-ksmbd-fixes' of git://git.samba.org/ksmbd
Pull ksmbd fixes from Steve French:
"Ten fixes for the ksmbd kernel server, for improved security and
additional buffer overflow checks:
- a security improvement to session establishment to reduce the
possibility of dictionary attacks
- fix to ensure that maximum i/o size negotiated in the protocol is
not less than 64K and not more than 8MB to better match expected
behavior
- fix for crediting (flow control) important to properly verify that
sufficient credits are available for the requested operation
- seven additional buffer overflow, buffer validation checks"
* tag '5.15-rc6-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: add buffer validation in session setup
ksmbd: throttle session setup failures to avoid dictionary attacks
ksmbd: validate OutputBufferLength of QUERY_DIR, QUERY_INFO, IOCTL requests
ksmbd: validate credit charge after validating SMB2 PDU body size
ksmbd: add buffer validation for smb direct
ksmbd: limit read/write/trans buffer size not to exceed 8MB
ksmbd: validate compound response buffer
ksmbd: fix potencial 32bit overflow from data area check in smb2_write
ksmbd: improve credits management
ksmbd: add validation in smb2_ioctl
Ten fixes, seven of which are in drivers. The core fixes are one to
fix a potential crash on resume, one to sort out our reference count
releases to avoid releasing in-use modules and one to adjust the cmd
per lun calculation to avoid an overflow in hyper-v.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYXQw8SYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbRFAQCv6lLT
ZRbWK+uCGlmrVNyutqsRWC9D8KOhxHKOosOSlQEA3d53mBpFuvgyKvZWyybMTkGj
u77ksdhMbSdr7wRCaIA=
=F1xU
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Ten fixes, seven of which are in drivers.
The core fixes are one to fix a potential crash on resume, one to sort
out our reference count releases to avoid releasing in-use modules and
one to adjust the cmd per lun calculation to avoid an overflow in
hyper-v"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: ufs-pci: Force a full restore after suspend-to-disk
scsi: qla2xxx: Fix unmap of already freed sgl
scsi: qla2xxx: Fix a memory leak in an error path of qla2x00_process_els()
scsi: qla2xxx: Return -ENOMEM if kzalloc() fails
scsi: sd: Fix crashes in sd_resume_runtime()
scsi: mpi3mr: Fix duplicate device entries when scanning through sysfs
scsi: core: Put LLD module refcnt after SCSI device is released
scsi: storvsc: Fix validation for unsolicited incoming packets
scsi: iscsi: Fix set_param() handling
scsi: core: Fix shost->cmd_per_lun calculation in scsi_add_host_with_dma()
Many MIPS CPUs have optional CPU features which are not activated for
all CPU cores. Print the CPU options, which are implemented in the core,
in /proc/cpuinfo. This makes it possible to see which features are
supported and which are not supported. This should cover all standard
MIPS extensions. Before, it only printed information about the main MIPS
ASEs.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Changes from original patch[0]:
- Remove cpu_has_6k_cache and cpu_has_8k_cache due to commit 6ce91ba858
("MIPS: Remove cpu_has_6k_cache and cpu_has_8k_cache in cpu_cache_init()")
- Add new options: mac2008_only, ftlbparex, gsexcex, mmid, mm_sysad,
mm_full
- Use seq_puts instead of seq_printf as suggested by checkpatch
- Minor commit message reword
[0]: https://lore.kernel.org/linux-mips/20181223225224.23042-1-hauke@hauke-m.de/
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Fix the following checkpatch errors - no logic changes:
WARNING: Block comments use a trailing */ on a separate line
+ * */
ERROR: space prohibited before open square bracket '['
+ char fmt [64];
ERROR: space prohibited before that ',' (ctx:WxE)
+ seq_printf(m, "%s0x%04x", i ? ", " : "" ,
ERROR: trailing whitespace
+^Iseq_printf(m, "isa\t\t\t:"); $
ERROR: trailing statements should be on next line
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Fix assembly errors like:
{standard input}: Assembler messages:
{standard input}:287: Error: opcode not supported on this processor: mips3 (mips3) `dins $10,$7,32,32'
{standard input}:680: Error: opcode not supported on this processor: mips3 (mips3) `dins $10,$7,32,32'
{standard input}:1274: Error: opcode not supported on this processor: mips3 (mips3) `dins $12,$9,32,32'
{standard input}:2175: Error: opcode not supported on this processor: mips3 (mips3) `dins $10,$7,32,32'
make[1]: *** [scripts/Makefile.build:277: mm/highmem.o] Error 1
with code produced from `__cmpxchg64' for MIPS64r2 CPU configurations
using CONFIG_32BIT and CONFIG_PHYS_ADDR_T_64BIT.
This is due to MIPS_ISA_ARCH_LEVEL downgrading the assembly architecture
to `r4000' i.e. MIPS III for MIPS64r2 configurations, while there is a
block of code containing a DINS MIPS64r2 instruction conditionalized on
MIPS_ISA_REV >= 2 within the scope of the downgrade.
The assembly architecture override code pattern has been put there for
LL/SC instructions, so that code compiles for configurations that select
a processor to build for that does not support these instructions while
still providing run-time support for processors that do, dynamically
switched by non-constant `cpu_has_llsc'. It went in with linux-mips.org
commit aac8aa7717 ("Enable a suitable ISA for the assembler around
ll/sc so that code builds even for processors that don't support the
instructions. Plus minor formatting fixes.") back in 2005.
Fix the problem by wrapping these instructions along with the adjacent
SYNC instructions only, following the practice established with commit
cfd54de3b0 ("MIPS: Avoid move psuedo-instruction whilst using
MIPS_ISA_LEVEL") and commit 378ed6f0e3 ("MIPS: Avoid using .set mips0
to restore ISA"). Strictly speaking the SYNC instructions do not have
to be wrapped as they are only used as a Loongson3 erratum workaround,
so they will be enabled in the assembler by default, but do this so as
to keep code consistent with other places.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: c7e2d71dda ("MIPS: Fix set_pte() for Netlogic XLR using cmpxchg64()")
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
cvmx_helper_initialize_packet_io_local() is unused and after removing
it cvmx_pko_initialize_local() is also unused.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
- Big cleanup for ARM arch timer clocksource in order to set the scene
for ARMv8.6 and provide support for higher frequencies with longer
roll up (Marc Zyngier)
- Make arch dependant the Exynos MCT and Samsung PWM timers (Krzysztof
Kozlowski)
- Select the TIMER_OF option for the timer TI DM (Kees Cook)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmFzIzIACgkQqDIjiipP
6E+FtwgAiKcoatwiAXIBqb+9Xdlj2hVOSwH+MbZOWK/FhnU8/ylVkR+f7cDzpd35
IoyV1coxNDh2a6ZSnodThOJR95wP+BDlxp8H90Hz5axA+g/lU7aZ1bM6hDc1fTz7
DQLKOQNkOrIiW8TRctbTuc2qot6l7n+GIT1VmksXXyZSGhhxPDloaUFL7fXkA7XE
QY0ekmkElYzUpelrieklqpIZ4W23iNoSqUeE4SKr+0F+BTVDi4/mft0oAED8QVlw
qc66N2OivKF5BbhdxiZaeWKVV12WPvxVxcEyi38UzjYcdbZqOYlx5q4QAQPkVDMm
ehPtEW0SGvT2jMf5DZCV/rtLPYQz7Q==
=6EYk
-----END PGP SIGNATURE-----
Merge tag 'timers-v5.16-rc1' into timers/core
Pull timers update for v5.16 from Daniel Lezcano:
- Fix redefined macro in the arc timer ()
- Big cleanup for ARM arch timer clocksource in order to set the scene
for ARMv8.6 and provide support for higher frequencies with longer
roll up (Marc Zyngier)
- Make arch dependant the Exynos MCT and Samsung PWM timers (Krzysztof
Kozlowski)
- Select the TIMER_OF option for the timer TI DM (Kees Cook)
Link: https://lore.kernel.org/r/65693aaf-ab94-c9bb-a97b-a2bb77033a54@linaro.org
Signed-off-by: Borislav Petkov <bp@suse.de>
