So far, glock_hash_walk took a reference on each glock it iterated over, and it
was the examiner's responsibility to drop those references. Dropping the final
reference to a glock can sleep and the examiners are called in a RCU critical
section with spin locks held, so examiners that didn't need the extra reference
had to drop it asynchronously via gfs2_glock_queue_put or similar. This wasn't
done correctly in thaw_glock which did call gfs2_glock_put, and not at all in
dump_glock_func.
Change glock_hash_walk to not take glock references at all. That way, the
examiners that don't need them won't have to bother with slow asynchronous
puts, and the examiners that do need references can take them themselves.
Reported-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In gfs2_inode_lookup and gfs2_create_inode, we're calling
gfs2_cancel_delete_work which currently cancels any remote delete work
(delete_work_func) synchronously. This means that if the work is
currently running, it will wait for it to finish. We're doing this to
pevent a previous instance of an inode from having any influence on the
next instance.
However, delete_work_func uses gfs2_inode_lookup internally, and we can
end up in a deadlock when delete_work_func gets interrupted at the wrong
time. For example,
(1) An inode's iopen glock has delete work queued, but the inode
itself has been evicted from the inode cache.
(2) The delete work is preempted before reaching gfs2_inode_lookup.
(3) Another process recreates the inode (gfs2_create_inode). It tries
to cancel any outstanding delete work, which blocks waiting for
the ongoing delete work to finish.
(4) The delete work calls gfs2_inode_lookup, which blocks waiting for
gfs2_create_inode to instantiate and unlock the new inode =>
deadlock.
It turns out that when the delete work notices that its inode has been
re-instantiated, it will do nothing. This means that it's safe to
cancel the delete work asynchronously. This prevents the kind of
deadlock described above.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, function gfs2_create_inode called glock_set_object to
set the gl_object for inode and iopen glocks before the glock was locked.
That's wrong because other competing processes like evict may be
blocked waiting for the glock and still have gl_object set before the
actual eviction can take place.
This patch moves the call to glock_set_object until after the glock is
acquire in function gfs2_create_inode, so it waits for possibly
competing evicts to finish their processing first.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The new GLF_INSTANTIATE_NEEDED flag obsoletes the old rgrp flag
GFS2_RDF_UPTODATE, so this patch replaces it like we did with inodes.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
With the addition of the new GLF_INSTANTIATE_NEEDED flag, the
GIF_INVALID flag is now redundant. This patch removes it.
Since inode_instantiate is only called when instantiation is needed,
the check in inode_instantiate is removed too.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, when a glock was locked, the very first holder on the
queue would unlock the lockref and call the go_instantiate glops function
(if one existed), unless GL_SKIP was specified. When we introduced the new
node-scope concept, we allowed multiple holders to lock glocks in EX mode
and share the lock.
But node-scope introduced a new problem: if the first holder has GL_SKIP
and the next one does NOT, since it is not the first holder on the queue,
the go_instantiate op was not called. Eventually the GL_SKIP holder may
call the instantiate sub-function (e.g. gfs2_rgrp_bh_get) but there was
still a window of time in which another non-GL_SKIP holder assumes the
instantiate function had been called by the first holder. In the case of
rgrp glocks, this led to a NULL pointer dereference on the buffer_heads.
This patch tries to fix the problem by introducing two new glock flags:
GLF_INSTANTIATE_NEEDED, which keeps track of when the instantiate function
needs to be called to "fill in" or "read in" the object before it is
referenced.
GLF_INSTANTIATE_IN_PROG which is used to determine when a process is
in the process of reading in the object. Whenever a function needs to
reference the object, it checks the GLF_INSTANTIATE_NEEDED flag, and if
set, it sets GLF_INSTANTIATE_IN_PROG and calls the glops "go_instantiate"
function.
As before, the gl_lockref spin_lock is unlocked during the IO operation,
which may take a relatively long amount of time to complete. While
unlocked, if another process determines go_instantiate is still needed,
it sees GLF_INSTANTIATE_IN_PROG is set, and waits for the go_instantiate
glop operation to be completed. Once GLF_INSTANTIATE_IN_PROG is cleared,
it needs to check GLF_INSTANTIATE_NEEDED again because the other process's
go_instantiate operation may not have been successful.
Functions that previously called the instantiate sub-functions now call
directly into gfs2_instantiate so the new bits are managed properly.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, function do_promote had a section of code that did
the actual instantiation. This patch splits that off into its own
function, gfs2_instantiate, which prepares us for the next patch that
will use that function.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch further simplifies function do_promote by eliminating some
redundant code in favor of using a lock_released flag. This is just
prep work for a future patch.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch simply re-factors function do_promote to reduce the indents.
The logic should be unchanged. This makes future patches more readable.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Remove the 'first' argument of trace_gfs2_promote: with GL_SKIP, the
'first' holder isn't the one that instantiates the glock
(gl_instantiate), which is what the 'first' flag was apparently supposed
to indicate.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, the go_lock glock operations (glops) did not do
any actual locking. They were used to instantiate objects, like reading
in dinodes and rgrps from the media.
This patch renames the functions to go_instantiate for clarity.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, failed consistency checks printed out the object
that failed, but not the object's glock. This patch makes it also
print out the object glock so we can see the glock's holders and flags
to aid with debugging.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, if function gfs2_inode_lookup encountered an error
after it had locked the iopen glock, it never unlocked it, relying on
the evict code to do the cleanup. The evict code then took the
inode glock while holding the iopen glock, which violates the locking
order. For example,
(1) node A does a gfs2_inode_lookup that fails, leaving the iopen glock
locked.
(2) node B calls delete_work_func -> gfs2_lookup_by_inum ->
gfs2_inode_lookup. It locks the inode glock and blocks trying to
lock the iopen glock, which is held by node A.
(3) node A eventually calls gfs2_evict_inode -> evict_should_delete.
It blocks trying to lock the inode glock, which is now held by
node B.
This patch introduces error handling to function gfs2_inode_lookup
so it properly dequeues held iopen glocks on errors.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, when a glock was locked by function gfs2_glock_nq_init,
it initialized the holder gh_ip (return address) as gfs2_glock_nq_init.
That made it extremely difficult to track down problems because many
functions call gfs2_glock_nq_init. This patch changes the function so
that it saves gh_ip from the caller of gfs2_glock_nq_init, which makes
it easy to backtrack which holder took the lock.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Before this patch, function do_gfs2_set_flags checked if the append
and immutable flags were being set while already set. If so, error -EPERM
was given. There's no reason why these two flags should be mutually
exclusive, and if you set them separately, you will, in essence, set
one while it is already set. For example:
chattr +a /mnt/gfs2/file1
chattr +i /mnt/gfs2/file1
The first command sets the append-only flag. Since they are additive,
the second command sets the immutable flag AND append-only flag,
since they both coexist in i_diskflags. So the second command should
not return an error. This bug caused xfstests generic/545 to fail.
This patch simply removes the invalid checks.
I also eliminated an unused parm from do_gfs2_set_flags.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In rgrp.c, there are several places where it does BUG_ON. This tells us
the call stack but nothing more, which is not very helpful.
This patch switches them to GLOCK_BUG_ON which also prints the glock,
its holders, and many of the rgrp values, which will help us debug
problems in the future.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, each individual "go_lock" glock operation (glop)
checked the GL_SKIP flag, and if set, would skip further processing.
This patch changes the logic so the go_lock caller, function go_promote,
checks the GL_SKIP flag before calling the go_lock op in the first place.
This avoids having to unnecessarily unlock gl_lockref.lock only to
re-lock it again.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Somehow, the GL_SKIP flag was missed when dumping glock holders.
This patch adds it to function hflags2str. I added it at the end because
I wanted Holder and Skip flags together to read "Hs" rather than "sH"
to avoid confusion with "Shared" ("SH") holder state.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, function gfs2_rgrp_go_lock checked if GL_SKIP and
ar_rgrplvb were both true. However, GL_SKIP is only set for rgrps if
ar_rgrplvb is true (see gfs2_inplace_reserve). This patch simply removes
the redundant check.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Also disable page faults during direct I/O requests and implement a
similar kind of retry logic as in the buffered I/O case.
The retry logic in the direct I/O case differs from the buffered I/O
case in the following way: direct I/O doesn't provide the kinds of
consistency guarantees between concurrent reads and writes that buffered
I/O provides, so once we lose the inode glock while faulting in user
pages, we always resume the operation. We never need to return a
partial read or write.
This locking problem was originally reported by Jan Kara. Linus came up
with the idea of disabling page faults. Many thanks to Al Viro and
Matthew Wilcox for their feedback.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the purpose specific kcalloc() function instead of the argument
size * count in the kzalloc() function.
[1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Signed-off-by: Len Baker <len.baker@gmx.com>
Link: https://lore.kernel.org/r/20210904145813.5161-1-len.baker@gmx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Modify the prototype from xilinx_dma_tx_descriptor to
xilinx_dma_alloc_tx_descriptor and xilinx_dma_channel_set_config
to xilinx_vdma_channel_set_config in API description to
fix below linux kernel-doc warnings.
drivers/dma/xilinx/xilinx_dma.c:800: warning: expecting
prototype for xilinx_dma_tx_descriptor(). Prototype was
for xilinx_dma_alloc_tx_descriptor() instead.
drivers/dma/xilinx/xilinx_dma.c:2471: warning: expecting
prototype for xilinx_dma_channel_set_config(). Prototype
was for xilinx_vdma_channel_set_config() instead.
Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1631525316-2323-1-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Use the helper macro SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() instead of the
verbose operators ".suspend_noirq /.resume_noirq/.freeze_noirq/
.thaw_noirq/.poweroff_noirq/.restore_noirq", because the
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() is a nice helper macro that could
be brought in to make code a little clearer, a little more concise.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210828090117.1814-1-caihuoqing@baidu.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Device reset clears the MSIXPERM table and the device registers. Re-program
the MSIXPERM table and re-enable the error interrupts post reset.
Fixes: 745e92a6d8 ("dmaengine: idxd: idxd: move remove() bits for idxd 'struct device' to device.c")
Reported-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163054188513.2853562.12077053294595278181.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix following panic on system halt:
Requesting system halt
[ 10.600000] spi spi0.1: spi_device 0.1 cleanup
[ 10.630000] fsl_edma_chan_mux() fsl_chan->edma->n_chans 64 dmamux_nr 0
[ 10.630000] *** ZERO DIVIDE *** FORMAT=4
[ 10.630000] Current process id is 38
[ 10.630000] BAD KERNEL TRAP: 00000000
[ 10.630000] PC: [<402f09ba>] fsl_edma_chan_mux+0x7c/0x12e
...
Some architecture as mcf5441x (ColdFire) may not have
a dmamux, so dmamux_nr is set to 0. This patch considers this case.
Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Link: https://lore.kernel.org/r/20210901211610.662077-1-angelo.dureghello@timesys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Using list_move_tail() instead of list_del() + list_add_tail()
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20210908092826.67765-1-cuibixuan@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The ptdma driver has added debugfs support, but this fails to build
when debugfs is disabled:
drivers/dma/ptdma/ptdma-debugfs.c: In function 'ptdma_debugfs_setup':
drivers/dma/ptdma/ptdma-debugfs.c:93:54: error: 'struct dma_device' has no member named 'dbg_dev_root'
93 | debugfs_create_file("info", 0400, pt->dma_dev.dbg_dev_root, pt,
| ^
drivers/dma/ptdma/ptdma-debugfs.c:96:55: error: 'struct dma_device' has no member named 'dbg_dev_root'
96 | debugfs_create_file("stats", 0400, pt->dma_dev.dbg_dev_root, pt,
| ^
drivers/dma/ptdma/ptdma-debugfs.c:102:52: error: 'struct dma_device' has no member named 'dbg_dev_root'
102 | debugfs_create_dir("q", pt->dma_dev.dbg_dev_root);
| ^
Remove the #ifdef in the header, as this only saves a few bytes,
but would require ugly #ifdefs in each driver using it.
Simplify the other user while we're at it.
Fixes: e2fb2e2a33 ("dmaengine: ptdma: Add debugfs entries for PTDMA")
Fixes: 26cf132de6 ("dmaengine: Create debug directories for DMA devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20210920122017.205975-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Since pm_runtime_put is done when tegra_adma_probe is successful, we
cannot do pm_runtime_put_sync again in tegra_adma_remove.
Fix this by removing the pm_runtime_put_sync in tegra_adma_remove.
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20211021031432.3466261-1-mudongliangabcd@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The previous commit 059e969c2a ("dmaengine: tegra210-adma: Using
pm_runtime_resume_and_get to replace open coding") forgets to replace
the pm_runtime_get_sync in the tegra_adma_probe, but removes the
pm_runtime_put_noidle.
Fix this by continuing to replace pm_runtime_get_sync with
pm_runtime_resume_and_get in tegra_adma_probe.
Fixes: 059e969c2a ("dmaengine: tegra210-adma: Using pm_runtime_resume_and_get to replace open coding")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20211021030538.3465287-1-mudongliangabcd@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In rcar_dmac_probe, if pm_runtime_resume_and_get fails, it forgets to
disable runtime PM. And of_dma_controller_free should only be invoked
after the success of of_dma_controller_register.
Fix this by refactoring the error handling code.
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211020143546.3436205-1-mudongliangabcd@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Before the `callback_result` callback was introduced drivers coded their
invocation to the callback in a similar way to:
if (cb->callback) {
spin_unlock(&dma->lock);
cb->callback(cb->callback_param);
spin_lock(&dma->lock);
}
With the introduction of `callback_result` two helpers where introduced to
transparently handle both types of callbacks. And drivers where updated to
look like this:
if (dmaengine_desc_callback_valid(cb)) {
spin_unlock(&dma->lock);
dmaengine_desc_callback_invoke(cb, ...);
spin_lock(&dma->lock);
}
dmaengine_desc_callback_invoke() correctly handles both `callback_result`
and `callback`. But we forgot to update the dmaengine_desc_callback_valid()
function to check for `callback_result`. As a result DMA descriptors that
use the `callback_result` rather than `callback` don't have their callback
invoked by drivers that follow the pattern above.
Fix this by checking for both `callback` and `callback_result` in
dmaengine_desc_callback_valid().
Fixes: f067025bc6 ("dmaengine: add support to provide error result from a DMA transation")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20211023134101.28042-1-lars@metafoo.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The iommu_init_table() helper takes an address range to reserve in
the IOMMU table being initialized to exclude MMIO addresses, this is
useful if the window stretches far beyond 4GB (although wastes some TCEs).
At the moment the code searches for such MMIO32 range and fails if none
found which is considered a problem while it really is not: it is actually
better as this says there is no MMIO32 to reserve and we can use
usually wasted TCEs. Furthermore PHYP never actually allows creating
windows starting at busaddress=0 so this MMIO32 range is never useful.
This removes error exit and initializes the table with zero range if
no MMIO32 is detected.
Fixes: 381ceda88c ("powerpc/pseries/iommu: Make use of DDW for indirect mapping")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211020132315.2287178-5-aik@ozlabs.ru
At the moment this check is performed after we remove the default window
which is late and disallows to revert whatever changes enable_ddw()
has made to DMA windows.
This moves the check and error exit before removing the window.
This raised the message severity from "debug" to "warning" as this
should not happen in practice and cannot be triggered by the userspace.
Fixes: 381ceda88c ("powerpc/pseries/iommu: Make use of DDW for indirect mapping")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211020132315.2287178-4-aik@ozlabs.ru
The it_map array is vzalloc'ed so use vfree() for it when creating
a huge DMA window failed for whatever reason.
While at this, write zero to it_map.
Fixes: 381ceda88c ("powerpc/pseries/iommu: Make use of DDW for indirect mapping")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211020132315.2287178-3-aik@ozlabs.ru
Currently, ->lru is a way to arrange non-LRU pages and has some
in-kernel users. In order to minimize noticable issues of page
reclaim and cache thrashing under high memory presure, limited
temporary pages were all chained with ->lru and can be reused
during the request. However, it seems that ->lru could be removed
when folio is landing.
Let's use page->private to chain temporary pages for now instead
and transform EROFS formally after the topic of the folio / file
page design is finalized.
Link: https://lore.kernel.org/r/20211022090120.14675-1-hsiangkao@linux.alibaba.com
Cc: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
mv_init_host() propagates the value returned by mv_chip_id() which in turn
gets propagated by mv_pci_init_one() and hits local_pci_probe().
During the process of driver probing, the probe function should return < 0
for failure, otherwise, the kernel will treat value > 0 as success.
Since this is a bug rather than a recoverable runtime error we should
use dev_alert() instead of dev_err().
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Update the pinctrl-bcm2835 driver to support being built as as a module
by converting it to a module_platform_driver() with the appropriate
module license, authors and description.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Link: https://lore.kernel.org/r/20211019221127.1953001-1-f.fainelli@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
I didn't notice that I already had applied this patch and while this
builds fine one copy is enough.
This reverts commit 22efef1ca0.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Ignore the same function with multiple groups.
Fix a typo in error print.
Fixes: 1948d5c51d ("pinctrl: Add pinmux & GPIO controller driver for a new SoC")
Signed-off-by: Rahul Tanwar <rtanwar@maxlinear.com>
Link: https://lore.kernel.org/r/20211020093815.20870-1-rtanwar@maxlinear.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit includes pinctrl driver for Mediatek MT7986
The difference of pinctrl between mt7986a and mt7986b
is that pin-41 to pin-65 do not exist on mt7986b
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Acked-by: Sean Wang <sean.wang@kernel.org>
Link: https://lore.kernel.org/r/20211022124036.5291-3-sam.shih@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This updates bindings for MT7986 pinctrl driver. The
difference of pinctrl between mt7986a and mt7986b is that pin-41 to
pin-65 do not exist on mt7986b
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211022124036.5291-2-sam.shih@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
On lan966x platform when the switch gets reseted then also the sgpio
gets reseted. The fix for this is to extend also the sgpio driver to
call the reset driver which will be reseted only once by the first
driver that is probed.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Steen Hegelund <steen.hegelund@microchip.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20211018085754.1066056-3-horatiu.vultur@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This describes the new binding which allows to call a reset driver from
the pinctrl-microchip-sgpio driver.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211018085754.1066056-2-horatiu.vultur@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
