Previously, the output format was programmed as part of the ioctl()
handler. However, this has two problems:
1) If there are multiple active streams with different output
formats, the hardware will use whichever format was set last
for both streams. Similarly, an ioctl() done in an inactive
context will wrongly affect other active contexts.
2) The registers are written while the device is not actively
streaming. To enable runtime PM tied to the streaming state,
all hardware access needs to be moved inside cedrus_device_run().
The call to cedrus_dst_format_set() is now placed just before the
codec-specific callback that programs the hardware.
Cc: <stable@vger.kernel.org>
Fixes: 50e761516f ("media: platform: Add Cedrus VPU decoder driver")
Suggested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Suggested-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As there are several ways where the driver could possible
retrieve sensor data, make the prints clearer about what
was detected and from where.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Now that the EFI _DSM table is parsed by the driver, we don't
need a DMI match anymore for Asus Transform T101HA.
This reverts commit 0a76fd8e8d.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This reverts commit 0d64e94205.
As gmin_subdev_add() now takes the ACPI handle directly,
we can deprecate the code that were doing this inside each
I2C driver.
PS.: This also reverts commit c03496b3bd ("media: atomisp: add a notice about possible leak resources")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of keep hardcoding device-specific tables, read them
directly from the ACPI BIOS, if available.
This method is know to work with Asus T101HA device. the
same table is also visible on EzPad devices. So, it seems
that at least some BIOSes use this method to pass data about
ISP2401-connected sensors.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The hive_isp_css_custom_host_hrt.h code, together
with atomisp_helper.h, provides an abstraction layer for
some functions inside atomisp_compat_css20.c and atomisp_cmd.c.
There's no good reason for that. In a matter of fact, after
removing the abstraction, the code looked a lot cleaner
and easier to understand.
So, get rid of them.
While here, get rid also of the udelay(1) abstraction code.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some parts of the driver have their own implementation of
memcpy() & friends. Replace all of them by strscpy().
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Replace usages of strcpy(), strlcpy() and strncpy() in favor
of strscpy().
Suggested-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If the sensor doesn't implement support for g_frame_interval,
it won't return the expected fps rate.
Instead of keeping DFS on its minimal value (which will likely
not work), set it to the max.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are several parts of the driver that could produce
a "dfs failed!" message. Change the texts, in order to help
identifying from where they're coming.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of having a static var to detect it, let's use the
already-existing arch-specific bytes, as this is how other
parts of the code also checks when it needs to do something
different, depending on an specific chipset version.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of hardcoding the intel family values there, use
the already defined ones from asm/intel-family.h.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The logic which sets the hpll_freq for BYT sets hpll_freq
to 1600MHz, but ignores it, and sets it again after reading
from-device-specific EFI vars (this time, using a default
of 2000MHz).
Remove the first set, as this will be overriden anyway.
While here, do minor adjustments on comments and on a
printk message.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There's a hack at the driver that selects a different table
for a BYT tablet, which sets the maximum frequency to 320 MHz,
instead of 400 MHz.
After looking at the Intel Aero Yocto's version from:
https://download.01.org/aero/deb/pool/main/l/linux-4.4.76-aero-1.3/
It was noticed that this depends on an Android-specific modprobe parameter,
which uses a macro (INTEL_MID_BOARD) from this file:
arch/x86/include/asm/spid.h
>From the comments there, it looks like this macro parses a
variable passed at boot time:
cmdline : androidboot.spid=vend:cust:manu:plat:prod:hard
The devices in question are identified there as:
INTEL_BYT_TABLET_BLK_PRO = 0x0000
INTEL_BYT_TABLET_BLK_ENG = 0x8000
Well, this is something that we don't have upstream. So,
without further details about that, we can't really parse it.
If we ever end supporting those devices with the upstream driver,
this patch can be reverted and the device can be detected
via DMI (or maybe via PCI ID?).
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As both isp2400 and isp2401 files are identical, remove one
of them and remove the test for ISP variant.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are some parameters that are different between
isp2400 and isp2401. None of those are actually used.
So, get rid of them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are lots of mess with IRQ ifdef settings. As the
*_global.h will already detect the type of IRQ system at
compile time, we can get rid of them, replacing by just
one ifdef for ISP2401.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The contents of hive_isp_css_2401_irq_types_hrt.h and
hive_isp_css_common/irq_global.h are identical, except for
one unused enum:
On isp2401, this IRQ line has this name:
hrt_isp_css_irq_is2401 = HIVE_GP_DEV_IRQ_ISP_PMEM_ERROR_BIT_ID,
While the same bit is named as:
hrt_isp_css_irq_isp_pmem_error = HIVE_GP_DEV_IRQ_ISP_PMEM_ERROR_BIT_ID,
At the isp2400 version.
Remove one of them, in order to reduce the code differences
between those two versions.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
- Get rid of typedefs;
- Get rid of a duplicated enum type with different names for
ISP2400 and ISP2401;
- adjust indentation on the touched code.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There's a different table for some BYT variants that depend
on something inside a FIXME ifdef.
Place this also inside it, just to shut up a clang-11 warning.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The abstraction layer for kvfree() was removed, but there
is still a left-over code there.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When building with clang, multiple copies of the structures to be
initialized are passed around on the stack and copied locally, using an
insane amount of stack space:
drivers/staging/media/atomisp/pci/sh_css.c:2371:1: error: stack frame size of 26864 bytes in function 'create_pipe' [-Werror,-Wframe-larger-than=]
Use constantly-allocated variables plus an explicit memcpy()
to avoid that.
Co-authored-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fixes: 6dc9a2568f ("media: atomisp: convert default struct values to use compound-literals with designated initializers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
For most warnings, the current code is OK. There are still
some issues with implicit-fallthough warnings.
Solve those and re-enable all warnings for this driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This table used to be used also to translate between ia_css
abstraction and V4L2 fourcc codes.
This was removed on a past patch, but the table now contains
two fields with identical values.
Get rid of one of them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Without that driver, there is a link failure in
ERROR: modpost: "intel_soc_pmic_exec_mipi_pmic_seq_element"
[drivers/staging/media/atomisp/pci/atomisp_gmin_platform.ko] undefined!
Add an explicit Kconfig dependency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
clang points out the usage of an incorrect enum type in the
list of supported image formats:
drivers/staging/media/atomisp/pci/atomisp_subdev.c:49:65: error: implicit conversion from enumeration type 'enum ia_css_frame_format' to different enumeration type 'enum atomisp_input_format' [-Werror,-Wenum-conversion]
{ V4L2_MBUS_FMT_CUSTOM_NV21, 12, 12, CSS_FRAME_FORMAT_NV21, 0, CSS_FRAME_FORMAT_NV21 },
drivers/staging/media/atomisp/pci/atomisp_subdev.c:49:39: error: implicit conversion from enumeration type 'enum ia_css_frame_format' to different enumeration type 'enum atomisp_input_format' [-Werror,-Wenum-conversion]
{ V4L2_MBUS_FMT_CUSTOM_NV21, 12, 12, CSS_FRAME_FORMAT_NV21, 0, CSS_FRAME_FORMAT_NV21 },
{ V4L2_MBUS_FMT_CUSTOM_NV12, 12, 12, CSS_FRAME_FORMAT_NV12, 0, CSS_FRAME_FORMAT_NV12 },
{ MEDIA_BUS_FMT_JPEG_1X8, 8, 8, CSS_FRAME_FORMAT_BINARY_8, 0, ATOMISP_INPUT_FORMAT_BINARY_8 },
Checking the git history, I found a commit that disabled one such case
because it did not work. It seems likely that the incorrect enum was
part of the original problem and that the others do not work either,
or have never been tested.
Disable all the ones that cause a warning.
Fixes: cb02ae3d71 ("media: staging: atomisp: Disable custom format for now")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some function calls pass an incorrect enum type:
drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c:858:16: error: implicit conversion from enumeration type 'input_system_ID_t' to different enumeration type 'gp_device_ID_t' [-Werror,-Wenum-conversion]
gp_device_rst(INPUT_SYSTEM0_ID);
~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c:860:19: error: implicit conversion from enumeration type 'input_system_ID_t' to different enumeration type 'gp_device_ID_t' [-Werror,-Wenum-conversion]
input_switch_rst(INPUT_SYSTEM0_ID);
~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c:876:27: error: implicit conversion from enumeration type 'input_system_cfg_flag_t' to different enumeration type 'input_system_connection_t' [-Werror,-Wenum-conversion]
config.multicast[i] = INPUT_SYSTEM_CFG_FLAG_RESET;
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c:1326:32: error: implicit conversion from enumeration type 'input_system_ID_t' to different enumeration type 'gp_device_ID_t' [-Werror,-Wenum-conversion]
input_selector_cfg_for_sensor(INPUT_SYSTEM0_ID);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~
drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c:1329:19: error: implicit conversion from enumeration type 'input_system_ID_t' to different enumeration type 'gp_device_ID_t' [-Werror,-Wenum-conversion]
input_switch_cfg(INPUT_SYSTEM0_ID, &config.input_switch_cfg);
~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~
INPUT_SYSTEM0_ID is zero, so use the corresponding zero-value
of the expected types instead.
Fixes: a49d25364d ("staging/atomisp: Add support for the Intel IPU v2")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In some configurations, including this header leads to a warning:
drivers/staging/media/atomisp//pci/sh_css_firmware.h:41:38: error: declaration of 'struct device' will not be visible outside of this function [-Werror,-Wvisibility]
Make sure the struct tag is known before declaring a function
that uses it as an argument.
Fixes: 9d4fa1a16b ("media: atomisp: cleanup directory hierarchy")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This driver is licensed under GPL 2.0, as stated inside their
headers.
Add the proper tag there. We should probably latter cleanup
the reduntant licensing text, but this could be done later,
after we get rid of other abstraction layers.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If something gets wrong, return, instead of trying to
convert from a NULL pointer.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Atomisp compat IOCTL handling suffers from the same security issue than
the V4L2 did. Fix this for atomisp.
See more information in patch a1dfb4c48c ("media: v4l2-compat-ioctl32.c:
refactor compat ioctl32 logic").
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The struct atomisp_overlay contains overlay_start_x and overlay_start_y
fields. Instead of copying the value of the overlay_start_x field between
the two structs, the value of the overlay_start_y field of the compat
struct was copied to the overlay_start_x field of the 64-bit kernel struct
in get operation and back in put. The overlay_start_x field value was not
copied from or to the user space struct.
Fix this so that the value of overlay_start_x is copied to overlay_start_x
and the value of overlay_start_y is copied to overlay_start_y.
Also do copy blend_overlay_perc_u field only once.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The ISP firmware logic is complex, as several binaries are
contained into a single file.
Print debug messages:
- with a stack dump if binary not found;
- when a firmware is selected.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In order to check if aren't there any memory leaks, let's
add a debug print for hmm_free().
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
It can be useful to be able to test different firmware files
at modprobe time, in order to be able to test different
variants without much efforts.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
While there's a way to list the firmware binaries in runtime,
it is worth to also print it during firmware load.
One advantage is that this code also introduces additional
checks with regards to invalid firmware types, which can be
useful to identify problems.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In order to make easier to identify what a firmware file
contains, add more info at the firmware dump log facility.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
It was reported that older GCCs compile smm_test in a way that breaks
it completely:
kvm_exit: reason EXIT_CPUID rip 0x4014db info 0 0
func 7ffffffd idx 830 rax 0 rbx 0 rcx 0 rdx 0, cpuid entry not found
...
kvm_exit: reason EXIT_MSR rip 0x40abd9 info 0 0
kvm_msr: msr_read 487 = 0x0 (#GP)
...
Note, '7ffffffd' was supposed to be '80000001' as we're checking for
SVM. Dropping '-O2' from compiler flags help. Turns out, asm block in
sync_with_host() is wrong. We us 'in 0xe, %%al' instruction to sync
with the host and in 'AL' register we actually pass the parameter
(stage) but after sync 'AL' gets written to but GCC thinks the value
is still there and uses it to compute 'EAX' for 'cpuid'.
smm_test can't fully use standard ucall() framework as we need to
write a very simple SMI handler there. Fix the immediate issue by
making RAX input/output operand. While on it, make sync_with_host()
static inline.
Reported-by: Marcelo Bandeira Condotta <mcondotta@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200610164116.770811-1-vkuznets@redhat.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
'Page not present' event may or may not get injected depending on
guest's state. If the event wasn't injected, there is no need to
inject the corresponding 'page ready' event as the guest may get
confused. E.g. Linux thinks that the corresponding 'page not present'
event wasn't delivered *yet* and allocates a 'dummy entry' for it.
This entry is never freed.
Note, 'wakeup all' events have no corresponding 'page not present'
event and always get injected.
s390 seems to always be able to inject 'page not present', the
change is effectively a nop.
Suggested-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200610175532.779793-2-vkuznets@redhat.com>
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=208081
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
schedule_work() returns 'false' only when the work is already on the queue
and this can't happen as kvm_setup_async_pf() always allocates a new one.
Also, to avoid potential race, it makes sense to to schedule_work() at the
very end after we've added it to the queue.
While on it, do some minor cleanup. gfn_to_pfn_async() mentioned in a
comment does not currently exist and, moreover, we can check
kvm_is_error_hva() at the very beginning, before we try to allocate work so
'retry_sync' label can go away completely.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200610175532.779793-1-vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The pointer s is being assigned a value that is never read, the
assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Message-Id: <20200609233121.1118683-1-colin.king@canonical.com>
Fixes: 7837699fa6 ("KVM: In kernel PIT model")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When userspace configures KVM_GUESTDBG_SINGLESTEP, KVM will manage the
presence of X86_EFLAGS_TF via kvm_set/get_rflags on vcpus. The actual
rflag bit is therefore hidden from callers.
That includes init_emulate_ctxt() which uses the value returned from
kvm_get_flags() to set ctxt->tf. As a result, x86_emulate_instruction()
will skip a single step, leaving singlestep_rip stale and not returning
to userspace.
This resolves the issue by observing the vcpu guest_debug configuration
alongside ctxt->tf in x86_emulate_instruction(), performing the single
step if set.
Cc: stable@vger.kernel.org
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Message-Id: <20200519081048.8204-1-felipe@nutanix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_CAP_HYPERV_ENLIGHTENED_VMCS will be reported as supported even when
nested VMX is not, fix evmcs_test/hyperv_cpuid tests to check for both.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200610135847.754289-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
state_test/smm_test use KVM_CAP_NESTED_STATE check as an indicator for
nested VMX/SVM presence and this is incorrect. Check for the required
features dirrectly.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200610135847.754289-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using a topic branch so that stable branches can simply cherry-pick the
patch.
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
