ITLB miss on kernel pages only occur with CONFIG_MODULES and
CONFIG_DEBUG_PAGEALLOC.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Since commit c62ce9ef97 ("powerpc: remove remaining bits from
CONFIG_APUS"), tophys() has become a pure constant operation.
PAGE_OFFSET is known at compile time so the physical address
can be builtin directly.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Since commit c62ce9ef97 ("powerpc: remove remaining bits from
CONFIG_APUS"), tophys() has become a pure constant operation.
PAGE_OFFSET is known at compile time so the physical address
can be builtin directly.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use SPRN_SPRG2 to store the current thread PGDIR and
avoid reading thread_struct.pgdir at every TLB miss.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When calling RTAS, the stack pointer is stored in SPRN_SPRG2
in order to be able to restore it in case of machine check in RTAS.
As machine check is not a perfomance critical path, this patch
frees SPRN_SPRG2 by using a field in thread struct instead.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There is no reason to re-read each time the pointer at
location 0xf0 as it is fixed and known.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The 83xx has 8 SPRG registers and uses at least SPRG4
for DTLB handling LRU.
Fixes: 2319f12395 ("powerpc/mm: e300c2/c3/c4 TLB errata workaround")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Looks like book3s/32 doesn't set RI on machine check, so
checking RI before calling die() will always be fatal
allthought this is not an issue in most cases.
Fixes: b96672dd84 ("powerpc: Machine check interrupt is a non-maskable interrupt")
Fixes: daf00ae71d ("powerpc/traps: restore recoverability of machine_check interrupts")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: stable@vger.kernel.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
MSR[RI] has already been cleared a few lines above.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When no machine description matches, display it clearly
before looping forever.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 24be85a23d ("powerpc/powernv: Clear PECE1 in LPCR via stop-api
only on Hotplug", 2017-07-21) added two calls to opal_slw_set_reg()
inside pnv_cpu_offline(), with the aim of changing the LPCR value in
the SLW image to disable wakeups from the decrementer while a CPU is
offline. However, pnv_cpu_offline() gets called each time a secondary
CPU thread is woken up to participate in running a KVM guest, that is,
not just when a CPU is offlined.
Since opal_slw_set_reg() is a very slow operation (with observed
execution times around 20 milliseconds), this means that an offline
secondary CPU can often be busy doing the opal_slw_set_reg() call
when the primary CPU wants to grab all the secondary threads so that
it can run a KVM guest. This leads to messages like "KVM: couldn't
grab CPU n" being printed and guest execution failing.
There is no need to reprogram the SLW image on every KVM guest entry
and exit. So that we do it only when a CPU is really transitioning
between online and offline, this moves the calls to
pnv_program_cpu_hotplug_lpcr() into pnv_smp_cpu_kill_self().
Fixes: 24be85a23d ("powerpc/powernv: Clear PECE1 in LPCR via stop-api only on Hotplug")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In cpufeatures_process_feature(), if a provided CPU feature is unknown and
enable_unknown is false, we erroneously print that the feature is being
enabled and return true, even though no feature has been enabled, and
may also set feature bits based on the last entry in the match table.
Fix this so that we only set feature bits from the match table if we have
actually enabled a feature from that table, and when failing to enable an
unknown feature, always print the "not enabling" message and return false.
Coincidentally, some older gccs (<GCC 7), when invoked with
-fsanitize-coverage=trace-pc, cause a spurious uninitialised variable
warning in this function:
arch/powerpc/kernel/dt_cpu_ftrs.c: In function ‘cpufeatures_process_feature’:
arch/powerpc/kernel/dt_cpu_ftrs.c:686:7: warning: ‘m’ may be used uninitialized in this function [-Wmaybe-uninitialized]
if (m->cpu_ftr_bit_mask)
An upcoming patch will enable support for kcov, which requires this option.
This patch avoids the warning.
Fixes: 5a61ef74f2 ("powerpc/64s: Support new device tree binding for discovering CPU features")
Reported-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[ajd: add commit message]
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
The xmon debugger IPI handler waits in the callback function while
xmon is still active. This means they don't complete the IPI, and the
initiator always times out waiting for them.
Things manage to work after the timeout because there is some fallback
logic to keep NMI IPI state sane in case of the timeout, but this is a
bit ugly.
This patch changes NMI IPI back to half-asynchronous (i.e., wait for
everyone to call in, do not wait for IPI function to complete), but
the complexity is avoided by going one step further and allowing new
IPIs to be issued before the IPI functions to all complete.
If synchronization against that is required, it is left up to the
caller, but current callers don't require that. In fact with the
timeout handling, callers must be able to cope with this already.
Fixes: 5b73151fff ("powerpc: NMI IPI make NMI IPIs fully sychronous")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The NMI IPI timeout logic is broken, if __smp_send_nmi_ipi() times out
on the first condition, delay_us will be zero which will send it into
the second spin loop with no timeout so it will spin forever.
Fixes: 5b73151fff ("powerpc: NMI IPI make NMI IPIs fully sychronous")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In commit 7820856a4f ("powerpc/mm/book3e/64: Remove unsupported
64Kpage size from 64bit booke") we dropped the 64K page size support
from the 64-bit nohash (Book3E) code.
But we didn't update the dependencies of the PPC_64K_PAGES option,
meaning a randconfig can still trigger this code and cause a build
breakage, eg:
arch/powerpc/include/asm/nohash/64/pgtable.h:14:2: error: #error "Page size not supported"
arch/powerpc/include/asm/nohash/mmu-book3e.h:275:2: error: #error Unsupported page size
So remove PPC_BOOK3E_64 from the dependencies. This also means we
don't need to worry about PPC_FSL_BOOK3E, because that was just trying
to prevent the PPC_BOOK3E_64=y && PPC_FSL_BOOK3E=y case.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We weren't using SYSCALL_DEFINE for sys_switch_endian(), which means
it wasn't able to be traced by CONFIG_FTRACE_SYSCALLS.
By using the macro we create the right metadata and the syscall is
visible. eg:
# cd /sys/kernel/debug/tracing
# echo 1 | tee events/syscalls/sys_*_switch_endian/enable
# ~/switch_endian_test
# cat trace
...
switch_endian_t-3604 [009] .... 315.175164: sys_switch_endian()
switch_endian_t-3604 [009] .... 315.175167: sys_switch_endian -> 0x5555aaaa5555aaaa
switch_endian_t-3604 [009] .... 315.175169: sys_switch_endian()
switch_endian_t-3604 [009] .... 315.175169: sys_switch_endian -> 0x5555aaaa5555aaaa
Fixes: 529d235a0e ("powerpc: Add a proper syscall for switching endianness")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
While the current kernel drivers/of/ code allows developers to be
sloppy and use a DTS status value of "ok", the current DTSpec 0.1
makes it clear that the proper spelling is "okay", so fix the small
number of PowerPC .dts files that do this.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When updating page tables, we need to make sure we fill the page table
entry valid bits. We do this by or'ing in one of PGD/PUD/PMD_VAL_BITS.
The page table 'set' interfaces allow updating the raw value of page
table entries without setting the valid bits, so remove those
interfaces to avoid incorrect usage in future.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Reword commit message based on mailing list discussion]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 8792468da5 "powerpc: Add the ability to save FPU without
giving it up" unexpectedly removed the MSR_FE0 and MSR_FE1 bits from
the bitmask used to update the MSR of the previous thread in
__giveup_fpu() causing a KVM-PR MacOS guest to lockup and panic the
host kernel.
Leaving FE0/1 enabled means unrelated processes might receive FPEs
when they're not expecting them and crash. In particular if this
happens to init the host will then panic.
eg (transcribed):
qemu-system-ppc[837]: unhandled signal 8 at 12cc9ce4 nip 12cc9ce4 lr 12cc9ca4 code 0
systemd[1]: unhandled signal 8 at 202f02e0 nip 202f02e0 lr 001003d4 code 0
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Reinstate these bits to the MSR bitmask to enable MacOS guests to run
under 32-bit KVM-PR once again without issue.
Fixes: 8792468da5 ("powerpc: Add the ability to save FPU without giving it up")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The Processor Utilzation of Resource Registers (PURR) provide an
estimate of resources used by a cpu thread. Section 7.6 in Book III of
the ISA outlines how to calculate the percentage of shared resources
for threads using the ratio of the PURR delta and Timebase Register
delta for a sampled period.
This calculation is currently done erroneously by the lparstat tool
from the powerpc-utils package. This patch exports the current
timebase value after we sample the PURRs and exposes it to userspace
accounting tools via /proc/ppc64/lparcfg.
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The recent rework of PCI kconfig symbols exposed an existing bug in
the CURRITUCK kconfig logic.
It selects PPC4xx_PCI_EXPRESS which depends on PCI, but PCI is user
selectable and might be disabled, leading to a warning:
WARNING: unmet direct dependencies detected for PPC4xx_PCI_EXPRESS
Depends on [n]: PCI [=n] && 4xx [=y]
Selected by [y]:
- CURRITUCK [=y] && PPC_47x [=y]
Prior to commit eb01d42a77 ("PCI: consolidate PCI config entry in
drivers/pci") PCI was enabled by default for currituck_defconfig so we
didn't see the warning. The bad logic was still there, it just
required someone disabling PCI in their .config to hit it.
Fix it by forcing PCI on for CURRITUCK, which seems was always the
expectation anyway.
Fixes: eb01d42a77 ("PCI: consolidate PCI config entry in drivers/pci")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds a debugfs interface to force scheduling a recovery event.
This can be used to recover a specific PE or schedule a "special" recovery
even that checks for errors at the PHB level.
To force a recovery of a normal PE, use:
echo '<#pe>:<#phb>' > /sys/kernel/debug/powerpc/eeh_force_recover
To force a scan for broken PHBs:
echo 'hwcheck' > /sys/kernel/debug/powerpc/eeh_force_recover
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently when we detect an error we automatically invoke the EEH recovery
handler. This can be annoying when debugging EEH problems, or when working
on EEH itself so this patch adds a debugfs knob that will prevent a
recovery event from being queued up when an issue is detected.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a helper to find the pci_controller structure based on the domain
number / phb id.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
To use this function at all #define DEBUG needs to be set in eeh_cache.c.
Considering that printing at pr_debug is probably not all that useful since
it adds the additional hurdle of requiring you to enable the debug print if
dynamic_debug is in use so this patch bumps it to pr_info.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Adds a debugfs file that can be read to view the contents of the EEH
address cache. This is pretty similar to the existing
eeh_addr_cache_print() function, but that function is intended to debug
issues inside of the kernel since it's #ifdef`ed out by default, and writes
into the kernel log.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The EEH address cache is used to map a physical MMIO address back to a PCI
device. It's useful to know when it's being manipulated, but currently this
requires recompiling with #define DEBUG set. This is pointless since we
have dynamic_debug nowdays, so remove the #ifdef guard and add a pr_debug()
for the remove case too.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There's no need to the custom getter/setter functions so we should remove
them in favour of using the generic one. While we're here, change the type
of eeh_max_freeze to u32 and print the value in decimal rather than
hex because printing it in hex makes no sense.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit d4fde568a3 ("powerpc/64: Use optimized checksum routines on
little-endian") converted last powerpc user of GENERIC_CSUM.
This patch does a final cleanup dropping the Kconfig GENERIC_CSUM
option which is always 'n', and associated piece of code in
asm/checksum.h
Fixes: d4fde568a3 ("powerpc/64: Use optimized checksum routines on little-endian")
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The slbfee. instruction must have bit 24 of RB clear, failure to do
so can result in false negatives that result in incorrect assertions.
This is not obvious from the ISA v3.0B document, which only says:
The hardware ignores the contents of RB 36:38 40:63 -- p.1032
This patch fixes the bug and also clears all other bits from PPC bit
36-63, which is good practice when dealing with reserved or ignored
bits.
Fixes: e15a4fea4d ("powerpc/64s/hash: Add some SLB debugging tests")
Cc: stable@vger.kernel.org # v4.20+
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch updates the kernel non-linear virtual map to 512TB when
we're built with 64K page size and are using the hash MMU. We allocate
one context for the vmalloc region and hence the max virtual area size
is limited by the context map size (512TB for 64K and 64TB for 4K page
size).
This patch fixes boot failures with large amounts of system RAM where
we need large vmalloc space to handle per cpu allocations.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
GCC 8 warns about the logic in vr_get/set(), which with -Werror breaks
the build:
In function ‘user_regset_copyin’,
inlined from ‘vr_set’ at arch/powerpc/kernel/ptrace.c:628:9:
include/linux/regset.h:295:4: error: ‘memcpy’ offset [-527, -529] is
out of the bounds [0, 16] of object ‘vrsave’ with type ‘union
<anonymous>’ [-Werror=array-bounds]
arch/powerpc/kernel/ptrace.c: In function ‘vr_set’:
arch/powerpc/kernel/ptrace.c:623:5: note: ‘vrsave’ declared here
} vrsave;
This has been identified as a regression in GCC, see GCC bug 88273.
However we can avoid the warning and also simplify the logic and make
it more robust.
Currently we pass -1 as end_pos to user_regset_copyout(). This says
"copy up to the end of the regset".
The definition of the regset is:
[REGSET_VMX] = {
.core_note_type = NT_PPC_VMX, .n = 34,
.size = sizeof(vector128), .align = sizeof(vector128),
.active = vr_active, .get = vr_get, .set = vr_set
},
The end is calculated as (n * size), ie. 34 * sizeof(vector128).
In vr_get/set() we pass start_pos as 33 * sizeof(vector128), meaning
we can copy up to sizeof(vector128) into/out-of vrsave.
The on-stack vrsave is defined as:
union {
elf_vrreg_t reg;
u32 word;
} vrsave;
And elf_vrreg_t is:
typedef __vector128 elf_vrreg_t;
So there is no bug, but we rely on all those sizes lining up,
otherwise we would have a kernel stack exposure/overwrite on our
hands.
Rather than relying on that we can pass an explict end_pos based on
the sizeof(vrsave). The result should be exactly the same but it's
more obviously not over-reading/writing the stack and it avoids the
compiler warning.
Reported-by: Meelis Roos <mroos@linux.ee>
Reported-by: Mathieu Malaterre <malat@debian.org>
Cc: stable@vger.kernel.org
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The change_pte() notifier was designed to use as a quick path to
update secondary MMU PTEs on write permission changes or PFN changes.
For KVM, it could reduce the vm-exits when vcpu faults on the pages
that was touched up by KSM. It's not used to do cache invalidations,
for example, if we see the notifier will be called before the real PTE
update after all (please see set_pte_at_notify that set_pte_at was
called later).
All the necessary cache invalidation should all be done in
invalidate_range() already.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds an "in_guest" parameter to machine_check_print_event_info()
so that we can avoid trying to translate guest NIP values into
symbolic form using the host kernel's symbol table.
Reviewed-by: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This makes the handling of machine check interrupts that occur inside
a guest simpler and more robust, with less done in assembler code and
in real mode.
Now, when a machine check occurs inside a guest, we always get the
machine check event struct and put a copy in the vcpu struct for the
vcpu where the machine check occurred. We no longer call
machine_check_queue_event() from kvmppc_realmode_mc_power7(), because
on POWER8, when a vcpu is running on an offline secondary thread and
we call machine_check_queue_event(), that calls irq_work_queue(),
which doesn't work because the CPU is offline, but instead triggers
the WARN_ON(lazy_irq_pending()) in pnv_smp_cpu_kill_self() (which
fires again and again because nothing clears the condition).
All that machine_check_queue_event() actually does is to cause the
event to be printed to the console. For a machine check occurring in
the guest, we now print the event in kvmppc_handle_exit_hv()
instead.
The assembly code at label machine_check_realmode now just calls C
code and then continues exiting the guest. We no longer either
synthesize a machine check for the guest in assembly code or return
to the guest without a machine check.
The code in kvmppc_handle_exit_hv() is extended to handle the case
where the guest is not FWNMI-capable. In that case we now always
synthesize a machine check interrupt for the guest. Previously, if
the host thinks it has recovered the machine check fully, it would
return to the guest without any notification that the machine check
had occurred. If the machine check was caused by some action of the
guest (such as creating duplicate SLB entries), it is much better to
tell the guest that it has caused a problem. Therefore we now always
generate a machine check interrupt for guests that are not
FWNMI-capable.
Reviewed-by: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
kvmhv_p9_guest_entry() implements a fast-path guest entry for Power9
when guest and host are both running with the Radix MMU.
Currently in that path we don't save the host AMR (Authority Mask
Register) value, and we always restore 0 on return to the host. That
is OK at the moment because the AMR is not used for storage keys with
the Radix MMU.
However we plan to start using the AMR on Radix to prevent the kernel
from reading/writing to userspace outside of copy_to/from_user(). In
order to make that work we need to save/restore the AMR value.
We only restore the value if it is different from the guest value,
which is already in the register when we exit to the host. This should
mean we rarely need to actually restore the value when running a
modern Linux as a guest, because it will be using the same value as
us.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Russell Currey <ruscur@russell.cc>
grow_halt_poll_ns() have a strange behaviour in case
(vcpu->halt_poll_ns != 0) &&
(vcpu->halt_poll_ns < halt_poll_ns_grow_start).
In this case, vcpu->halt_poll_ns will be multiplied by grow factor
(halt_poll_ns_grow) which will require several grow iteration in order
to reach a value bigger than halt_poll_ns_grow_start.
This means that growing vcpu->halt_poll_ns from value of 0 is slower
than growing it from a positive value less than halt_poll_ns_grow_start.
Which is misleading and inaccurate.
Fix issue by changing grow_halt_poll_ns() to set vcpu->halt_poll_ns
to halt_poll_ns_grow_start in any case that
(vcpu->halt_poll_ns < halt_poll_ns_grow_start).
Regardless if vcpu->halt_poll_ns is 0.
use READ_ONCE to get a consistent number for all cases.
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Nir Weiner <nir.weiner@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The hard-coded value 10000 in grow_halt_poll_ns() stands for the initial
start value when raising up vcpu->halt_poll_ns.
It actually sets the first timeout to the first polling session.
This value has significant effect on how tolerant we are to outliers.
On the standard case, higher value is better - we will spend more time
in the polling busyloop, handle events/interrupts faster and result
in better performance.
But on outliers it puts us in a busy loop that does nothing.
Even if the shrink factor is zero, we will still waste time on the first
iteration.
The optimal value changes between different workloads. It depends on
outliers rate and polling sessions length.
As this value has significant effect on the dynamic halt-polling
algorithm, it should be configurable and exposed.
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Nir Weiner <nir.weiner@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
grow_halt_poll_ns() have a strange behavior in case
(halt_poll_ns_grow == 0) && (vcpu->halt_poll_ns != 0).
In this case, vcpu->halt_pol_ns will be set to zero.
That results in shrinking instead of growing.
Fix issue by changing grow_halt_poll_ns() to not modify
vcpu->halt_poll_ns in case halt_poll_ns_grow is zero
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Nir Weiner <nir.weiner@oracle.com>
Suggested-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_arch_memslots_updated() is at this point in time an x86-specific
hook for handling MMIO generation wraparound. x86 stashes 19 bits of
the memslots generation number in its MMIO sptes in order to avoid
full page fault walks for repeat faults on emulated MMIO addresses.
Because only 19 bits are used, wrapping the MMIO generation number is
possible, if unlikely. kvm_arch_memslots_updated() alerts x86 that
the generation has changed so that it can invalidate all MMIO sptes in
case the effective MMIO generation has wrapped so as to avoid using a
stale spte, e.g. a (very) old spte that was created with generation==0.
Given that the purpose of kvm_arch_memslots_updated() is to prevent
consuming stale entries, it needs to be called before the new generation
is propagated to memslots. Invalidating the MMIO sptes after updating
memslots means that there is a window where a vCPU could dereference
the new memslots generation, e.g. 0, and incorrectly reuse an old MMIO
spte that was created with (pre-wrap) generation==0.
Fixes: e59dbe09f8 ("KVM: Introduce kvm_arch_memslots_updated()")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All new 32-bit architectures should have 64-bit userspace off_t type, but
existing architectures has 32-bit ones.
To enforce the rule, new config option is added to arch/Kconfig that defaults
ARCH_32BIT_OFF_T to be disabled for new 32-bit architectures. All existing
32-bit architectures enable it explicitly.
New option affects force_o_largefile() behaviour. Namely, if userspace
off_t is 64-bits long, we have no reason to reject user to open big files.
Note that even if architectures has only 64-bit off_t in the kernel
(arc, c6x, h8300, hexagon, nios2, openrisc, and unicore32),
a libc may use 32-bit off_t, and therefore want to limit the file size
to 4GB unless specified differently in the open flags.
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Yury Norov <ynorov@marvell.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds an entry to the kvm_stats_debugfs directory which provides the
number of large (2M or 1G) pages which have been used to setup the guest
mappings, for radix guests.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The SPAPR TCE KVM device references all hardware IOMMU tables assigned to
some IOMMU group to ensure that in-kernel KVM acceleration of H_PUT_TCE
can work. The tables are references when an IOMMU group gets registered
with the VFIO KVM device by the KVM_DEV_VFIO_GROUP_ADD ioctl;
KVM_DEV_VFIO_GROUP_DEL calls into the dereferencing code
in kvm_spapr_tce_release_iommu_group() which walks through the list of
LIOBNs, finds a matching IOMMU table and calls kref_put() when found.
However that code stops after the very first successful derefencing
leaving other tables referenced till the SPAPR TCE KVM device is destroyed
which normally happens on guest reboot or termination so if we do hotplug
and unplug in a loop, we are leaking IOMMU tables here.
This removes a premature return to let kvm_spapr_tce_release_iommu_group()
find and dereference all attached tables.
Fixes: 121f80ba68 ("KVM: PPC: VFIO: Add in-kernel acceleration for VFIO")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Devices on the KVM_FAST_MMIO_BUS by definition have length zero and are
thus used for notification purposes rather than data transfer. For
example eventfd for virtio devices.
This means that when emulating mmio instructions which target devices on
this bus we can immediately handle them and return without needing to load
the instruction from guest memory.
For now we restrict this to stores as this is the only use case at
present.
For a normal guest the effect is negligible, however for a nested guest
we save on the order of 5us per access.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Currently, the KVM code assumes that if the host kernel is using the
XIVE interrupt controller (the new interrupt controller that first
appeared in POWER9 systems), then the in-kernel XICS emulation will
use the XIVE hardware to deliver interrupts to the guest. However,
this only works when the host is running in hypervisor mode and has
full access to all of the XIVE functionality. It doesn't work in any
nested virtualization scenario, either with PR KVM or nested-HV KVM,
because the XICS-on-XIVE code calls directly into the native-XIVE
routines, which are not initialized and cannot function correctly
because they use OPAL calls, and OPAL is not available in a guest.
This means that using the in-kernel XICS emulation in a nested
hypervisor that is using XIVE as its interrupt controller will cause a
(nested) host kernel crash. To fix this, we change most of the places
where the current code calls xive_enabled() to select between the
XICS-on-XIVE emulation and the plain XICS emulation to call a new
function, xics_on_xive(), which returns false in a guest.
However, there is a further twist. The plain XICS emulation has some
functions which are used in real mode and access the underlying XICS
controller (the interrupt controller of the host) directly. In the
case of a nested hypervisor, this means doing XICS hypercalls
directly. When the nested host is using XIVE as its interrupt
controller, these hypercalls will fail. Therefore this also adds
checks in the places where the XICS emulation wants to access the
underlying interrupt controller directly, and if that is XIVE, makes
the code use the virtual mode fallback paths, which call generic
kernel infrastructure rather than doing direct XICS access.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The header search path -I. in kernel Makefiles is very suspicious;
it allows the compiler to search for headers in the top of $(srctree),
where obviously no header file exists.
Commit 46f43c6ee0 ("KVM: powerpc: convert marker probes to event
trace") first added these options, but they are completely useless.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Recent kernels, since commit e15a4fea4d ("powerpc/64s/hash: Add
some SLB debugging tests", 2018-10-03) use the slbfee. instruction,
which PR KVM currently does not have code to emulate. Consequently
recent kernels fail to boot under PR KVM. This adds emulation of
slbfee., enabling these kernels to boot successfully.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The compound IOMMU group rework moved iommu_register_group() together
in pnv_pci_ioda_setup_iommu_api() (which is a part of
ppc_md.pcibios_fixup). As the result, pnv_ioda_setup_bus_iommu_group()
does not create groups any more, it only adds devices to groups.
This works fine for boot time devices. However IOMMU groups for
SRIOV's VFs were added by pnv_ioda_setup_bus_iommu_group() so this got
broken: pnv_tce_iommu_bus_notifier() expects a group to be registered
for VF and it is not.
This adds missing group registration and adds a NULL pointer check
into the bus notifier so we won't crash if there is no group, although
it is not expected to happen now because of the change above.
Example oops seen prior to this patch:
$ echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/sriov_numvfs
Unable to handle kernel paging request for data at address 0x00000030
Faulting instruction address: 0xc0000000004a6018
Oops: Kernel access of bad area, sig: 11 [#1]
LE SMP NR_CPUS=2048 NUMA PowerNV
CPU: 46 PID: 7006 Comm: bash Not tainted 4.15-ish
NIP: c0000000004a6018 LR: c0000000004a6014 CTR: 0000000000000000
REGS: c000008fc876b400 TRAP: 0300 Not tainted (4.15-ish)
MSR: 900000000280b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE>
CFAR: c000000000d0be20 DAR: 0000000000000030 DSISR: 40000000 SOFTE: 1
...
NIP sysfs_do_create_link_sd.isra.0+0x68/0x150
LR sysfs_do_create_link_sd.isra.0+0x64/0x150
Call Trace:
pci_dev_type+0x0/0x30 (unreliable)
iommu_group_add_device+0x8c/0x600
iommu_add_device+0xe8/0x180
pnv_tce_iommu_bus_notifier+0xb0/0xf0
notifier_call_chain+0x9c/0x110
blocking_notifier_call_chain+0x64/0xa0
device_add+0x524/0x7d0
pci_device_add+0x248/0x450
pci_iov_add_virtfn+0x294/0x3e0
pci_enable_sriov+0x43c/0x580
mlx5_core_sriov_configure+0x15c/0x2f0 [mlx5_core]
sriov_numvfs_store+0x180/0x240
dev_attr_store+0x3c/0x60
sysfs_kf_write+0x64/0x90
kernfs_fop_write+0x1ac/0x240
__vfs_write+0x3c/0x70
vfs_write+0xd8/0x220
SyS_write+0x6c/0x110
system_call+0x58/0x6c
Fixes: 0bd971676e ("powerpc/powernv/npu: Add compound IOMMU groups")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reported-by: Santwana Samantray <santwana.samantray@in.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There is no need to provide anything but get_arch_dma_ops to
<linux/dma-mapping.h>. More the remaining declarations to <asm/iommu.h>
and drop all the includes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There is no good reason for this helper, just opencode it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Just fold the calculation into __phys_to_dma/__dma_to_phys as those are
the only places that should know about it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Now that we've switched all the powerpc nommu and swiotlb methods to
use the generic dma_direct_* calls we can remove these ops vectors
entirely and rely on the common direct mapping bypass that avoids
indirect function calls entirely. This also allows to remove a whole
lot of boilerplate code related to setting up these operations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Switch the streaming DMA mapping and ownership transfer methods to the
functionally identical dma_direct_ versions. Factor the cache
maintainance helpers into the form expected by the common code for that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The generic code allows a few nice things such as node local allocations
and dipping into the CMA area. The lookup of the right zone for a given
dma mask works a little different, but the results should be the same.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The only user left is powerpc, but even there the generic dma-direct
version works just as well, given that we guarantee that the swiotlb
buffer must always be addressable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This function is largely identical to the generic version used
everywhere else. Replace it with the generic version.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This function is identical to the generic dma_direct_get_required_mask,
except that the generic version also takes the bus_dma_mask account,
which could lead to incorrect results in the powerpc version.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The coherent cache version of this function already is functionally
identicall to the default version, and by defining the
arch_dma_coherent_to_pfn hook the same is ture for the noncoherent
version as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use the standard portable helper instead of the powerpc specific one,
which is about to go away.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Instead of letting the architecture supply all of dma_set_mask just
give it an additional hook selected by Kconfig.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We need to compare the last byte in the dma range and not the one after it
for the bus_dma_mask, just like we do for the regular dma_mask. Fix this
cleanly by merging the two comparisms into one.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The max_direct_dma_addr duplicates the bus_dma_mask field in struct
device. Use the generic field instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pci_dma_dev_setup_swiotlb is only used by the fsl_pci code, and closely
related to it, so fsl_pci.c seems like a better place for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This function is only used by the Cell iommu code, which can keep track
if it is using the iommu internally just as good.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
All iommu capable platforms now always use the iommu code with the
internal bypass, so there is not need for this magic anymore.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The ppc_md and pci_controller_ops methods are unused now and can be
removed. The dma_nommu implementation is generic to the generic one
except for using max_pfn instead of calling into the memblock API,
and all other dma_map_ops instances implement a method of their own.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use the generic iommu bypass code instead of overriding set_dma_mask.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
These devices are not PCIe devices and do not have associated dma map
ops, so this is just dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This function is completely bogus - the fact that two PCIe devices come
from the same vendor has absolutely nothing to say about the DMA
capabilities and characteristics.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use the generic iommu bypass code instead of overriding set_dma_mask.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If dart_init failed we didn't have a chance to setup dma or controller
ops yet, so there is no point in resetting them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This gets rid of a lot of clumsy code and finally allows us to mark
dma_iommu_ops const.
Includes fixes from Michael Ellerman.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Configure the dma settings at device setup time, and stop playing games
with get_pci_dma_ops. This prepares for using the common dma_configure
code later on.
Includes fixes from Michael Ellerman.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use the generic iommu bypass code instead of overriding set_dma_mask.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Call dma_get_required_mask_pSeriesLP directly instead of dma_iommu_ops
to simply the code a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a new iommu_bypass flag to struct dev_archdata so that the dma_iommu
implementation can handle the direct mapping transparently instead of
switiching ops around. Setting of this flag is controlled by new
pci_controller_ops method.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
vio_dma_mapping_ops currently does a lot of indirect calls through
dma_iommu_ops, which not only make the code harder to follow but are
also expensive in the post-spectre world. Unwind the indirect calls
by calling the ppc_iommu_* or iommu_* APIs directly applicable, or
just use the dma_iommu_* methods directly where we can.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Just one fix, for pgd/pud_present() which were broken on big endian since v4.20,
leading to possible data corruption.
Thanks to:
Aneesh Kumar K.V., Erhard F., Jan Kara.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJcaReiAAoJEFHr6jzI4aWAoy0P/09u2Vbj2vcOuFn/9BZ7JK5w
Pw9lHPC2NHtoM3Wq1ZAK3GPELkU4Bl4xtorFgC1/f0Oe3Nt3wHs6tfu+jx/qTgtz
+j1fR7Q0nKA62uJ53n9i4e3HLWJR80gFkczpWFMSgpbNdw/pvzZfW1YlXQs/iZTX
A0lwfrMKc8ud1KkAr7S1rzWnF+55gwOmia4F6fkHBAV/vo2rj861LTY0FRz5OdW0
h4OyQEmw/LBRnZW0SJJBGFib8HtpANc4a35Lbq9x7PMAsAGCvNBpqbVx1fkgRzEt
lVY/bUqFK8+KOQuao8T8FFN9y8upwayb5PZdlz3YlONSdZsDa3VbcQG2qLUhmJZQ
2NS0cuw2uJ7QP8iC26j1SH8EdcraQsYxl57nQZhtI38pP5RXT+C1+aZEwk2DNaPK
BQM4asEd9YNCKRvU/cxhS5Gv2BnerUuktF72vEx/ul/wXIjJXO4buIZyGDiznVsk
AImmdPA8yiGa8+0DN/TCuizFSMx3rwZEYPux6MqU40K/xp3f0eEiqCZD7xQ5kh+C
Vi5TV6/epTqUYbeKkrqMyJ+0CmeTWF2YL3hZ3Na5+XwIhgSOGGiGGpPrXcVqwvA0
t+zhN/L99urBtg3ubwiVfRd8WbZS5/9kDEhAZwsYjGxboVg4cnhniHU4RHIO/VYE
0MlwXdiZMXTJolzpZfuF
=8du7
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"Just one fix, for pgd/pud_present() which were broken on big endian
since v4.20, leading to possible data corruption.
Thanks to: Aneesh Kumar K.V., Erhard F., Jan Kara"
* tag 'powerpc-5.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Fix possible corruption on big endian due to pgd/pud_present()
In v4.20 we changed our pgd/pud_present() to check for _PAGE_PRESENT
rather than just checking that the value is non-zero, e.g.:
static inline int pgd_present(pgd_t pgd)
{
- return !pgd_none(pgd);
+ return (pgd_raw(pgd) & cpu_to_be64(_PAGE_PRESENT));
}
Unfortunately this is broken on big endian, as the result of the
bitwise & is truncated to int, which is always zero because
_PAGE_PRESENT is 0x8000000000000000ul. This means pgd_present() and
pud_present() are always false at compile time, and the compiler
elides the subsequent code.
Remarkably with that bug present we are still able to boot and run
with few noticeable effects. However under some work loads we are able
to trigger a warning in the ext4 code:
WARNING: CPU: 11 PID: 29593 at fs/ext4/inode.c:3927 .ext4_set_page_dirty+0x70/0xb0
CPU: 11 PID: 29593 Comm: debugedit Not tainted 4.20.0-rc1 #1
...
NIP .ext4_set_page_dirty+0x70/0xb0
LR .set_page_dirty+0xa0/0x150
Call Trace:
.set_page_dirty+0xa0/0x150
.unmap_page_range+0xbf0/0xe10
.unmap_vmas+0x84/0x130
.unmap_region+0xe8/0x190
.__do_munmap+0x2f0/0x510
.__vm_munmap+0x80/0x110
.__se_sys_munmap+0x14/0x30
system_call+0x5c/0x70
The fix is simple, we need to convert the result of the bitwise & to
an int before returning it.
Thanks to Erhard, Jan Kara and Aneesh for help with debugging.
Fixes: da7ad366b4 ("powerpc/mm/book3s: Update pmd_present to look at _PAGE_PRESENT bit")
Cc: stable@vger.kernel.org # v4.20+
Reported-by: Erhard F. <erhard_f@mailbox.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The netfilter conflicts were rather simple overlapping
changes.
However, the cls_tcindex.c stuff was a bit more complex.
On the 'net' side, Cong is fixing several races and memory
leaks. Whilst on the 'net-next' side we have Vlad adding
the rtnl-ness support.
What I've decided to do, in order to resolve this, is revert the
conversion over to using a workqueue that Cong did, bringing us back
to pure RCU. I did it this way because I believe that either Cong's
races don't apply with have Vlad did things, or Cong will have to
implement the race fix slightly differently.
Signed-off-by: David S. Miller <davem@davemloft.net>
The OF_RESERVED_MEM can be used if we have either CMA or the generic
declare coherent code built and we support the early flattened DT.
So don't bother making it a user visible options that is selected
by most configs that fit the above category, but just select it when
the requirements are met.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Rob Herring <robh@kernel.org>
This series finally gets us to the point of having system calls with
64-bit time_t on all architectures, after a long time of incremental
preparation patches.
There was actually one conversion that I missed during the summer,
i.e. Deepa's timex series, which I now updated based the 5.0-rc1 changes
and review comments.
The following system calls are now added on all 32-bit architectures
using the same system call numbers:
403 clock_gettime64
404 clock_settime64
405 clock_adjtime64
406 clock_getres_time64
407 clock_nanosleep_time64
408 timer_gettime64
409 timer_settime64
410 timerfd_gettime64
411 timerfd_settime64
412 utimensat_time64
413 pselect6_time64
414 ppoll_time64
416 io_pgetevents_time64
417 recvmmsg_time64
418 mq_timedsend_time64
419 mq_timedreceiv_time64
420 semtimedop_time64
421 rt_sigtimedwait_time64
422 futex_time64
423 sched_rr_get_interval_time64
Each one of these corresponds directly to an existing system call
that includes a 'struct timespec' argument, or a structure containing
a timespec or (in case of clock_adjtime) timeval. Not included here
are new versions of getitimer/setitimer and getrusage/waitid, which
are planned for the future but only needed to make a consistent API
rather than for correct operation beyond y2038. These four system
calls are based on 'timeval', and it has not been finally decided
what the replacement kernel interface will use instead.
So far, I have done a lot of build testing across most architectures,
which has found a number of bugs. Runtime testing so far included
testing LTP on 32-bit ARM with the existing system calls, to ensure
we do not regress for existing binaries, and a test with a 32-bit
x86 build of LTP against a modified version of the musl C library
that has been adapted to the new system call interface [3].
This library can be used for testing on all architectures supported
by musl-1.1.21, but it is not how the support is getting integrated
into the official musl release. Official musl support is planned
but will require more invasive changes to the library.
Link: https://lore.kernel.org/lkml/20190110162435.309262-1-arnd@arndb.de/T/
Link: https://lore.kernel.org/lkml/20190118161835.2259170-1-arnd@arndb.de/
Link: https://git.linaro.org/people/arnd/musl-y2038.git/ [2]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=IZVb
-----END PGP SIGNATURE-----
Merge tag 'y2038-new-syscalls' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground into timers/2038
Pull y2038 - time64 system calls from Arnd Bergmann:
This series finally gets us to the point of having system calls with 64-bit
time_t on all architectures, after a long time of incremental preparation
patches.
There was actually one conversion that I missed during the summer,
i.e. Deepa's timex series, which I now updated based the 5.0-rc1 changes
and review comments.
The following system calls are now added on all 32-bit architectures using
the same system call numbers:
403 clock_gettime64
404 clock_settime64
405 clock_adjtime64
406 clock_getres_time64
407 clock_nanosleep_time64
408 timer_gettime64
409 timer_settime64
410 timerfd_gettime64
411 timerfd_settime64
412 utimensat_time64
413 pselect6_time64
414 ppoll_time64
416 io_pgetevents_time64
417 recvmmsg_time64
418 mq_timedsend_time64
419 mq_timedreceiv_time64
420 semtimedop_time64
421 rt_sigtimedwait_time64
422 futex_time64
423 sched_rr_get_interval_time64
Each one of these corresponds directly to an existing system call that
includes a 'struct timespec' argument, or a structure containing a timespec
or (in case of clock_adjtime) timeval. Not included here are new versions
of getitimer/setitimer and getrusage/waitid, which are planned for the
future but only needed to make a consistent API rather than for correct
operation beyond y2038. These four system calls are based on 'timeval', and
it has not been finally decided what the replacement kernel interface will
use instead.
So far, I have done a lot of build testing across most architectures, which
has found a number of bugs. Runtime testing so far included testing LTP on
32-bit ARM with the existing system calls, to ensure we do not regress for
existing binaries, and a test with a 32-bit x86 build of LTP against a
modified version of the musl C library that has been adapted to the new
system call interface [3]. This library can be used for testing on all
architectures supported by musl-1.1.21, but it is not how the support is
getting integrated into the official musl release. Official musl support is
planned but will require more invasive changes to the library.
Link: https://lore.kernel.org/lkml/20190110162435.309262-1-arnd@arndb.de/T/
Link: https://lore.kernel.org/lkml/20190118161835.2259170-1-arnd@arndb.de/
Link: https://git.linaro.org/people/arnd/musl-y2038.git/ [2]
The system call tables have diverged a bit over the years, and a number
of the recent additions never made it into all architectures, for one
reason or another.
This is an attempt to clean it up as far as we can without breaking
compatibility, doing a number of steps:
- Add system calls that have not yet been integrated into all
architectures but that we definitely want there. This includes
{,f}statfs64() and get{eg,eu,g,p,u,pp}id() on alpha, which have
been missing traditionally.
- The s390 compat syscall handling is cleaned up to be more like
what we do on other architectures, while keeping the 31-bit
pointer extension. This was merged as a shared branch by the
s390 maintainers and is included here in order to base the other
patches on top.
- Add the separate ipc syscalls on all architectures that
traditionally only had sys_ipc(). This version is done without
support for IPC_OLD that is we have in sys_ipc. The
new semtimedop_time64 syscall will only be added here, not
in sys_ipc
- Add syscall numbers for a couple of syscalls that we probably
don't need everywhere, in particular pkey_* and rseq,
for the purpose of symmetry: if it's in asm-generic/unistd.h,
it makes sense to have it everywhere. I expect that any future
system calls will get assigned on all platforms together, even
when they appear to be specific to a single architecture.
- Prepare for having the same system call numbers for any future
calls. In combination with the generated tables, this hopefully
makes it easier to add new calls across all architectures
together.
All of the above are technically separate from the y2038 work,
but are done as preparation before we add the new 64-bit time_t
system calls everywhere, providing a common baseline set of system
calls.
I expect that glibc and other libraries that want to use 64-bit
time_t will require linux-5.1 kernel headers for building in
the future, and at a much later point may also require linux-5.1
or a later version as the minimum kernel at runtime. Having a
common baseline then allows the removal of many architecture or
kernel version specific workarounds.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=s4wf
-----END PGP SIGNATURE-----
Merge tag 'y2038-syscall-cleanup' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground into timers/2038
Pull preparatory work for y2038 changes from Arnd Bergmann:
System call unification and cleanup
The system call tables have diverged a bit over the years, and a number of
the recent additions never made it into all architectures, for one reason
or another.
This is an attempt to clean it up as far as we can without breaking
compatibility, doing a number of steps:
- Add system calls that have not yet been integrated into all architectures
but that we definitely want there. This includes {,f}statfs64() and
get{eg,eu,g,p,u,pp}id() on alpha, which have been missing traditionally.
- The s390 compat syscall handling is cleaned up to be more like what we
do on other architectures, while keeping the 31-bit pointer
extension. This was merged as a shared branch by the s390 maintainers
and is included here in order to base the other patches on top.
- Add the separate ipc syscalls on all architectures that traditionally
only had sys_ipc(). This version is done without support for IPC_OLD
that is we have in sys_ipc. The new semtimedop_time64 syscall will only
be added here, not in sys_ipc
- Add syscall numbers for a couple of syscalls that we probably don't need
everywhere, in particular pkey_* and rseq, for the purpose of symmetry:
if it's in asm-generic/unistd.h, it makes sense to have it everywhere. I
expect that any future system calls will get assigned on all platforms
together, even when they appear to be specific to a single architecture.
- Prepare for having the same system call numbers for any future calls. In
combination with the generated tables, this hopefully makes it easier to
add new calls across all architectures together.
All of the above are technically separate from the y2038 work, but are done
as preparation before we add the new 64-bit time_t system calls everywhere,
providing a common baseline set of system calls.
I expect that glibc and other libraries that want to use 64-bit time_t will
require linux-5.1 kernel headers for building in the future, and at a much
later point may also require linux-5.1 or a later version as the minimum
kernel at runtime. Having a common baseline then allows the removal of many
architecture or kernel version specific workarounds.
Just two fixes, both going to stable.
Our support for split pmd page table lock had a bug which could lead to a crash
on mremap() when using the Radix MMU (Power9 only).
A fix for the PAPR SCM driver (nvdimm) we added last release, which had a bug
where we might mis-handle a hypervisor response leading to us failing to attach
the memory region.
Thanks to:
Aneesh Kumar K.V, Oliver O'Halloran.
-----BEGIN PGP SIGNATURE-----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=anwQ
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Just two fixes, both going to stable.
- Our support for split pmd page table lock had a bug which could
lead to a crash on mremap() when using the Radix MMU (Power9 only).
- A fix for the PAPR SCM driver (nvdimm) we added last release, which
had a bug where we might mis-handle a hypervisor response leading
to us failing to attach the memory region.
Thanks to: Aneesh Kumar K.V, Oliver O'Halloran"
* tag 'powerpc-5.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/papr_scm: Use the correct bind address
powerpc/radix: Fix kernel crash with mremap()
This adds 21 new system calls on each ABI that has 32-bit time_t
today. All of these have the exact same semantics as their existing
counterparts, and the new ones all have macro names that end in 'time64'
for clarification.
This gets us to the point of being able to safely use a C library
that has 64-bit time_t in user space. There are still a couple of
loose ends to tie up in various areas of the code, but this is the
big one, and should be entirely uncontroversial at this point.
In particular, there are four system calls (getitimer, setitimer,
waitid, and getrusage) that don't have a 64-bit counterpart yet,
but these can all be safely implemented in the C library by wrapping
around the existing system calls because the 32-bit time_t they
pass only counts elapsed time, not time since the epoch. They
will be dealt with later.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
The time, stime, utime, utimes, and futimesat system calls are only
used on older architectures, and we do not provide y2038 safe variants
of them, as they are replaced by clock_gettime64, clock_settime64,
and utimensat_time64.
However, for consistency it seems better to have the 32-bit architectures
that still use them call the "time32" entry points (leaving the
traditional handlers for the 64-bit architectures), like we do for system
calls that now require two versions.
Note: We used to always define __ARCH_WANT_SYS_TIME and
__ARCH_WANT_SYS_UTIME and only set __ARCH_WANT_COMPAT_SYS_TIME and
__ARCH_WANT_SYS_UTIME32 for compat mode on 64-bit kernels. Now this is
reversed: only 64-bit architectures set __ARCH_WANT_SYS_TIME/UTIME, while
we need __ARCH_WANT_SYS_TIME32/UTIME32 for 32-bit architectures and compat
mode. The resulting asm/unistd.h changes look a bit counterintuitive.
This is only a cleanup patch and it should not change any behavior.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
This is the big flip, where all 32-bit architectures set COMPAT_32BIT_TIME
and use the _time32 system calls from the former compat layer instead
of the system calls that take __kernel_timespec and similar arguments.
The temporary redirects for __kernel_timespec, __kernel_itimerspec
and __kernel_timex can get removed with this.
It would be easy to split this commit by architecture, but with the new
generated system call tables, it's easy enough to do it all at once,
which makes it a little easier to check that the changes are the same
in each table.
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A lot of system calls that pass a time_t somewhere have an implementation
using a COMPAT_SYSCALL_DEFINEx() on 64-bit architectures, and have
been reworked so that this implementation can now be used on 32-bit
architectures as well.
The missing step is to redefine them using the regular SYSCALL_DEFINEx()
to get them out of the compat namespace and make it possible to build them
on 32-bit architectures.
Any system call that ends in 'time' gets a '32' suffix on its name for
that version, while the others get a '_time32' suffix, to distinguish
them from the normal version, which takes a 64-bit time argument in the
future.
In this step, only 64-bit architectures are changed, doing this rename
first lets us avoid touching the 32-bit architectures twice.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The IODA reset is used to flush out any OS controlled state from the PHB.
This reset can fail if a PHB fatal error has occurred in early boot,
probably due to a because of a bad device. We already do a fundemental
reset of the device in some cases, so this patch just adds a test to force
a full reset if firmware reports an error when performing the IODA reset.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
'regno' is directly controlled by user space, hence leading to a potential
exploitation of the Spectre variant 1 vulnerability.
On PTRACE_SETREGS and PTRACE_GETREGS requests, user space passes the
register number that would be read or written. This register number is
called 'regno' which is part of the 'addr' syscall parameter.
This 'regno' value is checked against the maximum pt_regs structure size,
and then used to dereference it, which matches the initial part of a
Spectre v1 (and Spectre v1.1) attack. The dereferenced value, then,
is returned to userspace in the GETREGS case.
This patch sanitizes 'regno' before using it to dereference pt_reg.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When building a 32 bit powerpc kernel with Binutils 2.31.1 this warning
is emitted:
powerpc-linux-gnu-ld: warning: orphan section `.branch_lt' from
`arch/powerpc/kernel/head_44x.o' being placed in section `.branch_lt'
As of binutils commit 2d7ad24e8726 ("Support PLT16 relocs against local
symbols")[1], 32 bit targets can produce .branch_lt sections in their
output.
Include these symbols in the .data section as the ppc64 kernel does.
[1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commitdiff;h=2d7ad24e8726ba4c45c9e67be08223a146a837ce
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Alan Modra <amodra@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently, eeh_pe_reset_full() will only attempt to reset a PE more
than once if activating the reset state and deactivating it both
succeed, but later polling shows that it hasn't become active.
Change this so that it will try up to three times for any reason other
than an unrecoverable slot error and adjust the message generation so
that it's clear weather the reset has ultimately succeeded or failed.
This allows the reset to succeed in some situations where it would
currently fail.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently, the EEH recovery process considers passed-through devices
as if they were not EEH-aware, which can cause them to be removed as
part of recovery. Because device removal requires cooperation from
the guest, this may lead to the process stalling or deadlocking.
Also, if devices are removed on the host side, they will be removed
from their IOMMU group, making recovery in the guest impossible.
Therefore, alter the recovery process so that passed-through devices
are not removed but are instead left frozen (and marked isolated)
until the guest performs it's own recovery. If firmware thaws a
passed-through PE because it's parent PE has been thawed (because it
was not passed through), re-freeze it.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a parameter to eeh_clear_pe_frozen_state() that allows
passed-through PEs to be excluded. Update callers to always pass true
so that there is no change in behaviour.
This is to prepare for follow-up work for passed-through devices.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a parameter to eeh_pe_state_clear() that allows passed-through PEs
to be excluded. Update callers to always pass true so that there is no
change in behaviour.
Also refactor to use direct traversal, to allow the removal of some
boilerplate.
This is to prepare for follow-up work for passed-through devices.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
eeh_unfreeze_pe() performs two operations: unfreezing a PE (which may
cause firmware to unfreeze child PEs as well) and de-isolating the PE
and it's children.
To simplify this and support future work, separate out the
de-isolation and perform it at the call sites (when necessary).
There should be no change in behaviour.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The 'clear_sw_state' parameter for eeh_pe_clear_frozen_state() is
redundant because it has no effect (except in the rare case of a
hardware error part way through unfreezing a tree of PEs, where it
would dangerously allow partial de-isolation before returning
failure).
It is passed down to __eeh_pe_clear_frozen_state(), and from there to
eeh_unfreeze_pe(), where it causes EEH_PE_ISOLATED to be removed
from the state of each PE during the traversal. However, when the
traversal finishes, EEH_PE_ISOLATED is unconditionally removed by a
call to eeh_pe_state_clear() regardless of the parameter's value.
So remove the flag and pass false to eeh_unfreeze_pe() (to avoid the
rare case described above, as it was before the flag was introduced).
Also, perform the recursion directly in the function and eliminate a
bit of boilerplate.
There should be no change in functionality, except as mentioned above.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Since commit c40dd2f766 ("powerpc: Add System RAM to /proc/iomem")
it is possible to use the generic walk_system_ram_range() and
the generic page_is_ram().
To enable the use of walk_system_ram_range() by the IBM EHEA ethernet
driver, we still need an export of the generic function.
As powerpc was the only user of CONFIG_ARCH_HAS_WALK_MEMORY, the
ifdef around the generic walk_system_ram_range() has become useless
and can be dropped.
Fixes: c40dd2f766 ("powerpc: Add System RAM to /proc/iomem")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Keep the EXPORT_SYMBOL_GPL in powerpc code]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
SO_RCVTIMEO and SO_SNDTIMEO socket options use struct timeval
as the time format. struct timeval is not y2038 safe.
The subsequent patches in the series add support for new socket
timeout options with _NEW suffix that will use y2038 safe
data structures. Although the existing struct timeval layout
is sufficiently wide to represent timeouts, because of the way
libc will interpret time_t based on user defined flag, these
new flags provide a way of having a structure that is the same
for all architectures consistently.
Rename the existing options with _OLD suffix forms so that the
right option is enabled for userspace applications according
to the architecture and time_t definition of libc.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Cc: ccaulfie@redhat.com
Cc: deller@gmx.de
Cc: paulus@samba.org
Cc: ralf@linux-mips.org
Cc: rth@twiddle.net
Cc: cluster-devel@redhat.com
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-alpha@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the static keyword around to remove the following warnings (W=1):
arch/powerpc/platforms/ps3/os-area.c:212:1: error: 'static' is not at beginning of declaration [-Werror=old-style-declaration]
arch/powerpc/platforms/ps3/system-bus.c:45:1: error: 'static' is not at beginning of declaration [-Werror=old-style-declaration]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There is not point in having a trailing semicolon after a closing curly
brace. Remove it.
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds support for generating bpf line info for
JITed programs.
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Enable kernel XZ compression option on 44x.
Tested on a Western Digital - MyBook Live NAS.
It takes 22 seconds for the 800 MHz CPU to decompress
and boot a 2.63 MiB XZ-compressed kernel simpleImage.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Instead provide a proper implementation in the direct mapping code, and
also wire it up for arm and powerpc, leaving an error return for all the
IOMMU or virtual mapping instances for which we'd have to wire up an
actual implementation
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
When binding an SCM volume to a physical address the hypervisor has the
option to return early with a continue token with the expectation that
the guest will resume the bind operation until it completes. A quirk of
this interface is that the bind address will only be returned by the
first bind h-call and the subsequent calls will return
0xFFFF_FFFF_FFFF_FFFF for the bind address.
We currently do not save the address returned by the first h-call. As a
result we will use the junk address as the base of the bound region if
the hypervisor decides to split the bind across multiple h-calls. This
bug was found when testing with very large SCM volumes where the bind
process would take more time than they hypervisor's internal h-call time
limit would allow. This patch fixes the issue by saving the bind address
from the first call.
Cc: stable@vger.kernel.org
Fixes: b5beae5e22 ("powerpc/pseries: Add driver for PAPR SCM regions")
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
With support for split pmd lock, we use pmd page pmd_huge_pte pointer
to store the deposited page table. In those config when we move page
tables we need to make sure we move the deposited page table to the
correct pmd page. Otherwise this can result in crash when we withdraw
of deposited page table because we can find the pmd_huge_pte NULL.
eg:
__split_huge_pmd+0x1070/0x1940
__split_huge_pmd+0xe34/0x1940 (unreliable)
vma_adjust_trans_huge+0x110/0x1c0
__vma_adjust+0x2b4/0x9b0
__split_vma+0x1b8/0x280
__do_munmap+0x13c/0x550
sys_mremap+0x220/0x7e0
system_call+0x5c/0x70
Fixes: 675d995297 ("powerpc/book3s64: Enable split pmd ptlock.")
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
To match its x86 counterpart, save_stack_trace_tsk_reliable() should
return -EINVAL in cases that it is currently returning 1. No caller is
currently differentiating non-zero error codes, but let's keep the
arch-specific implementations consistent.
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Mostly cosmetic changes:
- Group common stack pointer code at the top
- Simplify the first frame logic
- Code stackframe iteration into for...loop construct
- Check for trace->nr_entries overflow before adding any into the array
Suggested-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The bottom-most stack frame (the first to be unwound) may be largely
uninitialized, for the "Power Architecture 64-Bit ELF V2 ABI" only
requires its backchain pointer to be set.
The reliable stack tracer should be careful when verifying this frame:
skip checks on STACK_FRAME_LR_SAVE and STACK_FRAME_MARKER offsets that
may contain uninitialized residual data.
Fixes: df78d3f614 ("powerpc/livepatch: Implement reliable stack tracing for the consistency model")
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Make the HAVE_RELIABLE_STACKTRACE Kconfig option depend on
PPC_BOOK3S_64 for documentation purposes. Before this patch, it
depended on PPC64 && CPU_LITTLE_ENDIAN and because CPU_LITTLE_ENDIAN
implies PPC_BOOK3S_64, there's no functional change here.
Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
[mpe: Split out of larger patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The ppc64 specific implementation of the reliable stacktracer,
save_stack_trace_tsk_reliable(), bails out and reports an "unreliable
trace" whenever it finds an exception frame on the stack. Stack frames
are classified as exception frames if the STACK_FRAME_REGS_MARKER
magic, as written by exception prologues, is found at a particular
location.
However, as observed by Joe Lawrence, it is possible in practice that
non-exception stack frames can alias with prior exception frames and
thus, that the reliable stacktracer can find a stale
STACK_FRAME_REGS_MARKER on the stack. It in turn falsely reports an
unreliable stacktrace and blocks any live patching transition to
finish. Said condition lasts until the stack frame is
overwritten/initialized by function call or other means.
In principle, we could mitigate this by making the exception frame
classification condition in save_stack_trace_tsk_reliable() stronger:
in addition to testing for STACK_FRAME_REGS_MARKER, we could also take
into account that for all exceptions executing on the kernel stack
- their stack frames's backlink pointers always match what is saved
in their pt_regs instance's ->gpr[1] slot and that
- their exception frame size equals STACK_INT_FRAME_SIZE, a value
uncommonly large for non-exception frames.
However, while these are currently true, relying on them would make
the reliable stacktrace implementation more sensitive towards future
changes in the exception entry code. Note that false negatives, i.e.
not detecting exception frames, would silently break the live patching
consistency model.
Furthermore, certain other places (diagnostic stacktraces, perf, xmon)
rely on STACK_FRAME_REGS_MARKER as well.
Make the exception exit code clear the on-stack
STACK_FRAME_REGS_MARKER for those exceptions running on the "normal"
kernel stack and returning to kernelspace: because the topmost frame
is ignored by the reliable stack tracer anyway, returns to userspace
don't need to take care of clearing the marker.
Furthermore, as I don't have the ability to test this on Book 3E or 32
bits, limit the change to Book 3S and 64 bits.
Fixes: df78d3f614 ("powerpc/livepatch: Implement reliable stack tracing for the consistency model")
Reported-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add mem-loads/mem-stores events to sysfs.
The event is formed based on raw event encoding.
Primary PMU event used here is PM_MRK_INST_CMPL
along with MMCRA[SM] modes and Thresholding bit
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In htab_convert_pte_flags(), _PAGE_CACHE_CTL is used to check for the
_PAGE_SAO flag:
else if ((pteflags & _PAGE_CACHE_CTL) == _PAGE_SAO)
rflags |= (HPTE_R_W | HPTE_R_I | HPTE_R_M);
But, it isn't defined to include that flag:
#define _PAGE_CACHE_CTL (_PAGE_NON_IDEMPOTENT | _PAGE_TOLERANT)
This happens to work, but only because of the flag values:
#define _PAGE_SAO 0x00010 /* Strong access order */
#define _PAGE_NON_IDEMPOTENT 0x00020 /* non idempotent memory */
#define _PAGE_TOLERANT 0x00030 /* tolerant memory, cache inhibited */
To prevent any issues if these particulars ever change, add _PAGE_SAO to
the mask.
Suggested-by: Charles Johns <crjohns@us.ibm.com>
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Remove linux/syscalls.h which is included more than once
Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
Acked-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Remove linux/printk.h which is included more than once.
Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com>
Acked-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Remove linux/rtc.h which is included more than once
Signed-off-by: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On pseries systems, performing a partition migration can result in
altering the nodes a CPU is assigned to on the destination system. For
exampl, pre-migration on the source system CPUs are in node 1 and 3,
post-migration on the destination system CPUs are in nodes 2 and 3.
Handling the node change for a CPU can cause corruption in the slab
cache if we hit a timing where a CPUs node is changed while cache_reap()
is invoked. The corruption occurs because the slab cache code appears
to rely on the CPU and slab cache pages being on the same node.
The current dynamic updating of a CPUs node done in arch/powerpc/mm/numa.c
does not prevent us from hitting this scenario.
Changing the device tree property update notification handler that
recognizes an affinity change for a CPU to do a full DLPAR remove and
add of the CPU instead of dynamically changing its node resolves this
issue.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael W. Bringmann <mwb@linux.vnet.ibm.com>
Tested-by: Michael W. Bringmann <mwb@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-01-29
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Teach verifier dead code removal, this also allows for optimizing /
removing conditional branches around dead code and to shrink the
resulting image. Code store constrained architectures like nfp would
have hard time doing this at JIT level, from Jakub.
2) Add JMP32 instructions to BPF ISA in order to allow for optimizing
code generation for 32-bit sub-registers. Evaluation shows that this
can result in code reduction of ~5-20% compared to 64 bit-only code
generation. Also add implementation for most JITs, from Jiong.
3) Add support for __int128 types in BTF which is also needed for
vmlinux's BTF conversion to work, from Yonghong.
4) Add a new command to bpftool in order to dump a list of BPF-related
parameters from the system or for a specific network device e.g. in
terms of available prog/map types or helper functions, from Quentin.
5) Add AF_XDP sock_diag interface for querying sockets from user
space which provides information about the RX/TX/fill/completion
rings, umem, memory usage etc, from Björn.
6) Add skb context access for skb_shared_info->gso_segs field, from Eric.
7) Add support for testing flow dissector BPF programs by extending
existing BPF_PROG_TEST_RUN infrastructure, from Stanislav.
8) Split BPF kselftest's test_verifier into various subgroups of tests
in order better deal with merge conflicts in this area, from Jakub.
9) Add support for queue/stack manipulations in bpftool, from Stanislav.
10) Document BTF, from Yonghong.
11) Dump supported ELF section names in libbpf on program load
failure, from Taeung.
12) Silence a false positive compiler warning in verifier's BTF
handling, from Peter.
13) Fix help string in bpftool's feature probing, from Prashant.
14) Remove duplicate includes in BPF kselftests, from Yue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In Kbuild, if_changed and friends must have FORCE as a prerequisite.
Hence, $(filter-out FORCE,$^) or $(filter-out $(PHONY),$^) is a common
idiom to get the names of all the prerequisites except phony targets.
Add real-prereqs as a shorthand.
Note:
We cannot replace $(filter %.o,$^) in cmd_link_multi-m because $^ may
include auto-generated dependencies from the .*.cmd file when a single
object module is changed into a multi object module. Refer to commit
69ea912fda ("kbuild: remove unneeded link_multi_deps"). I added some
comment to avoid accidental breakage.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Rob Herring <robh@kernel.org>
This patch implements code-gen for new JMP32 instructions on ppc.
For JMP32 | JSET, instruction encoding for PPC_RLWINM_DOT is added to check
the result of ANDing low 32-bit of operands.
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The IPC system call handling is highly inconsistent across architectures,
some use sys_ipc, some use separate calls, and some use both. We also
have some architectures that require passing IPC_64 in the flags, and
others that set it implicitly.
For the addition of a y2038 safe semtimedop() system call, I chose to only
support the separate entry points, but that requires first supporting
the regular ones with their own syscall numbers.
The IPC_64 is now implied by the new semctl/shmctl/msgctl system
calls even on the architectures that require passing it with the ipc()
multiplexer.
I'm not adding the new semtimedop() or semop() on 32-bit architectures,
those will get implemented using the new semtimedop_time64() version
that gets added along with the other time64 calls.
Three 64-bit architectures (powerpc, s390 and sparc) get semtimedop().
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
We are trying to get rid of BUS_ATTR() and the usage of that in
ibmebus.c can be trivially converted to use BUS_ATTR_WO(), so use that
instead.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to provide non-atomic functions for io{read|write}64 that will
use readq and writeq when appropriate. We define a number of variants
of these functions in the generic iomap that will do non-atomic
operations on pio but atomic operations on mmio.
These functions are only defined if readq and writeq are defined. If
they are not, then the wrappers that always use non-atomic operations
from include/linux/io-64-nonatomic*.h will be used.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Suresh Warrier <warrier@linux.vnet.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adopt nvram module to reduce code duplication. This means CONFIG_NVRAM
becomes available to PPC64 builds. Previously it was only available to
PPC32 builds because it depended on CONFIG_GENERIC_NVRAM.
The IOC_NVRAM_GET_OFFSET ioctl as implemented on PPC64 validates the
offset returned by pmac_get_partition(). Do the same in the nvram module.
Note that the old PPC32 generic_nvram module lacked this test.
So when CONFIG_PPC32 && CONFIG_PPC_PMAC, the IOC_NVRAM_GET_OFFSET ioctl
would have returned 0 (always). But when CONFIG_PPC64 && CONFIG_PPC_PMAC,
the IOC_NVRAM_GET_OFFSET ioctl would have returned -1 (which is -EPERM)
when the requested partition was not found.
With this patch, the result is now -EINVAL on both PPC32 and PPC64 when
the requested PowerMac NVRAM partition is not found. This is a userspace-
visible change, in the non-existent partition case, which would be in
an error path for an IOC_NVRAM_GET_OFFSET ioctl syscall.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Switch PPC32 kernels from the generic_nvram module to the nvram module.
Also fix a theoretical bug where CHRP omits the chrp_nvram_init() call
when CONFIG_NVRAM_MODULE=m.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the nvram_size() function to those PowerPC platforms that don't already
have one: CHRP and PowerMac. This means that the ppc_md.nvram_size()
function can be called by nvram_get_size().
Since we are addressing CHRP inconsistencies here, rename chrp_nvram_read
and chrp_nvram_write, which break the naming convention used across
powerpc platforms for NVRAM accessor functions.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the nvram_read_byte() and nvram_write_byte() declarations in
powerpc/include/asm/nvram.h and use the cross-platform static functions
in linux/nvram.h instead.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For PowerPC PMUs that do not support context exclusion let's
advertise the PERF_PMU_CAP_NO_EXCLUDE capability. This ensures that
perf will prevent us from handling events where any exclusion flags
are set. Let's also remove the now unnecessary check for exclusion
flags.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: robin.murphy@arm.com
Cc: suzuki.poulose@arm.com
Link: https://lkml.kernel.org/r/1547128414-50693-10-git-send-email-andrew.murray@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=6H3h
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree fix from Rob Herring:
"A single build fix for powerpc due to device_node.type removal"
* tag 'devicetree-fixes-for-5.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
powerpc: chrp: Use of_node_is_type to access device_type
Commit 8ce5f84157 ("of: Remove struct device_node.type pointer")
removed struct device_node.type pointer, but the conversion to use
of_node_is_type() accessor was missed in chrp_init_IRQ().
Fixes: 8ce5f84157 ("of: Remove struct device_node.type pointer")
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Rob Herring <robh@kernel.org>
A couple of weeks of fixes.
There's one fix for an oops on Power9 machines with Open CAPI adapters.
And a fix for probable memory corruption in some of the new NPU code, caught by
smatch though and not seen in the wild.
Plus a few other minor fixes.
There's one non-fix which is the perf_regs change. That was sent during the
merge window but I accidentally only merged the first of two patches in the
series. It's been in linux-next so hopefully doesn't conflict with anything in
acme's tree.
Thanks to:
Alexey Kardashevskiy, Andrew Donnellan, Breno Leitao, Christian Lamparter,
Christophe Leroy, Dan Carpenter, Frederic Barrat, Greg Kurz, Jason A.
Donenfeld, Madhavan Srinivasan.
-----BEGIN PGP SIGNATURE-----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=hlZ7
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A couple of weeks of fixes.
There's one fix for an oops on Power9 machines with Open CAPI
adapters.
And a fix for probable memory corruption in some of the new NPU code,
caught by smatch though and not seen in the wild.
Plus a few other minor fixes.
There's one non-fix which is the perf_regs change. That was sent
during the merge window but I accidentally only merged the first of
two patches in the series. It's been in linux-next so hopefully
doesn't conflict with anything in acme's tree.
Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Breno Leitao,
Christian Lamparter, Christophe Leroy, Dan Carpenter, Frederic Barrat,
Greg Kurz, Jason A. Donenfeld, Madhavan Srinivasan"
* tag 'powerpc-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/syscalls: Fix syscall tracing
powerpc/pseries: Fix build break due to pnv_npu2_init()
powerpc/4xx/ocm: Fix fix for phys_addr_t printf warnings
powerpc/powernv/npu: Fix oops in pnv_try_setup_npu_table_group()
powerpc/tm: Limit TM code inside PPC_TRANSACTIONAL_MEM
powerpc/8xx: fix setting of pagetable for Abatron BDI debug tool.
powerpc/powernv/npu: Allocate enough memory in pnv_try_setup_npu_table_group()
powerpc/perf: Update perf_regs structure to include MMCRA
Recently in commit fbf508da74 ("powerpc: split compat syscall table
out from native table") we changed the layout of the system call
table. Instead of having two entries for each syscall number, one for
the regular entry point and one for the compat entry point, we now
have separate tables for regular and compat entry points.
This inadvertently broke syscall tracing (CONFIG_FTRACE_SYSCALLS),
because our implementation of arch_syscall_addr() knew about the
layout of the table (it did nr * 2).
We can fix it just by dropping our version of arch_syscall_addr() and
using the generic version which does:
return (unsigned long)sys_call_table[nr];
Fixes: fbf508da74 ("powerpc: split compat syscall table out from native table")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 3be2df00e2 ("powerpc/pseries/npu: Enable platform support")
added a call to pnv_npu2_init() in pseries code. This causes a build
break if we build with CONFIG_PPC_PSERIES && !CONFIG_PPC_POWERNV:
powerpc64le-pc-linux-gnu-ld: arch/powerpc/platforms/pseries/pci.o: in function `pSeries_final_fixup':
pci.c:(.init.text+0x1b0): undefined reference to `pnv_npu2_init'
This commit therefore wraps that line in an ifdef, so that pseries
builds without powernv.
Fixes: 3be2df00e2 ("powerpc/pseries/npu: Enable platform support")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[mpe: Frob change log a bit to blame a different commit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
WARN_ON() already contains an unlikely(), so it's not necessary to
wrap it into another.
Signed-off-by: Igor Stoppa <igor.stoppa@huawei.com>
Cc: Arseny Solokha <asolokha@kb.kras.ru>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
GCC supports -mcpu=G4
This patch gives the opportunity to select ALTIVEC for this variant.
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On Power9 machines (64-bit Book3S), we can be running with either the
Hash table or Radix tree MMU enabled. So add some text to the __die()
output to tell us which is enabled, for the case where all you have is
the oops output and no other information.
Example output:
kernel BUG at drivers/misc/lkdtm/bugs.c:63!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: kvm vmx_crypto binfmt_misc ip_tables x_tables
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The page size the kernel is built with is useful info when debugging a
crash, so add it to the output in __die().
Result looks like eg:
kernel BUG at drivers/misc/lkdtm/bugs.c:63!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: vmx_crypto kvm binfmt_misc ip_tables
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Using pr_cont() risks having our output interleaved with other output
from other CPUs. Instead print everything in a single printk() call.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The Wii has POWER and EJECT buttons, which are connected through
normalization logic to the GPIO controller (the length of an assertion
of these signals is always the same, regardless of how long the user
pressed the buttons).
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The Hollywood GPIO controller is connected to the Hollywood PIC (&PIC1)
at IRQs 10 and 11; IRQ 10 for GPIO lines that are configured for access
by the PPC, 11 for GPIO lines that are configured for access by the
ARM926.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
TCE_KILL_INVAL_ALL has moved long ago but the comment was forgotted so
finish the move and remove the comment.
Fixes: 0bbcdb437d "powerpc/powernv/npu: TCE Kill helpers cleanup"
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This removes never used symbol - pnv_power9_force_smt4.
Note that we might still want to add stubs for:
void pnv_power9_force_smt4_catch(void);
void pnv_power9_force_smt4_release(void);
Fixes: 7672691a08 "powerpc/powernv: Provide a way to force a core into SMT4 mode"
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In the ld documentation under Builtin Functions:
BLOCK(exp)
This is a synonym for ALIGN, for compatibility with older linker scripts.
Clang's linker (lld) doesn't know about BLOCK so remove this use of
it.
Suggested-by: George Rimar <grimar@accesssoftek.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
I wanted to test the virtex440-ml507 qemu machine and found that the
dtb for it was not built.
All powerpc dtbs are only built when CONFIG_OF_ALL_DTBS is set which
depend on COMPILE_TEST.
This patch enables building of the virtex dtbs when
CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is enabled.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
[mpe: Put both targets on a single line]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
ipic_set_highest_priority(), ipic_enable_mcp() and ipic_disable_mcp()
are unused. This patch drops them.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The header search path -I. in kernel Makefiles is very suspicious;
it allows the compiler to search for headers in the top of $(srctree),
where obviously no header file exists.
-Iinclude/math-emu seems unnecessary because all files include headers
in the form of #include <math-emu/...>.
I was able to build without these header search paths.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The same path -Iarch/$(ARCH) is passed to KBUILD_CPPFLAGS,
KBUILD_AFLAGS, and KBUILD_CFLAGS.
As you see in scripts/Makefile.lib, KBUILD_CPPFLAGS is passed
to c_flags and a_flags as well.
Passing it to KBUILD_CPPFLAGS is enough.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The header search path -I. in kernel Makefiles is very suspicious;
it allows the compiler to search for headers in the top of $(srctree),
where obviously no header file exists.
Commit 46f43c6ee0 ("KVM: powerpc: convert marker probes to event
trace") first added these options, but they are completely useless.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE
for debugfs files.
Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
arch_early_irq_init() does nothing different than the weak
arch_early_irq_init() in kernel/softirq.c
Fixes: 089fb442f3 ("powerpc: Use ARCH_IRQ_INIT_FLAGS")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
One of the more common cases of allocation size calculations is finding the
size of a structure that has a zero-sized array at the end, along with memory
for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can now
use the new struct_size() helper:
instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use a CONSOLE_LOGLEVEL_DEBUG macro for console_loglevel rather
than a naked number.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
My recent commit to fix the printf warnings in ocm.c got the format
specifier wrong, because I copied it from the documentation without
realising the square brackets are not meant as literals.
This results in the address being suffixed with a literal "[p]".
Actually tested this time:
# cat info /sys/kernel/debug/ppc4xx_ocm
PhysAddr : 0x0000000400040000
...
NC.PhysAddr : 0x0000000400040000
...
C.PhysAddr : 0x0000000000000000
Fixes: 52b88fa1e8 ("powerpc/4xx/ocm: Fix phys_addr_t printf warnings")
Reported-by: Christian Lamparter <chunkeey@gmail.com>
Tested-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
With a recent change around IOMMU group, a system with an opencapi
adapter is no longer booting and we get a kernel oops:
BUG: Kernel NULL pointer dereference at 0x00000028
Faulting instruction address: 0xc0000000000aa38c
...
NIP pnv_try_setup_npu_table_group+0x1c/0x1a0
LR pnv_pci_ioda_fixup+0x1f8/0x660
Call Trace:
pnv_try_setup_npu_table_group+0x60/0x
pnv_pci_ioda_fixup+0x20c/0x660
pcibios_resource_survey+0x2c8/0x31c
pcibios_init+0xb0/0xe4
do_one_initcall+0x64/0x264
kernel_init_freeable+0x36c/0x468
kernel_init+0x2c/0x148
ret_from_kernel_thread+0x5c/0x68
An opencapi device is using a device PE, so the current code breaks
because pe->pbus is not defined.
More generally, there's no need to define an IOMMU group for opencapi,
as the device sends real addresses directly (admittedly, the
virtualization story is yet to be written). So let's fix it by
skipping the IOMMU group setup for opencapi PHBs.
Fixes: 0bd971676e ("powerpc/powernv/npu: Add compound IOMMU groups")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit e1c3743e1a ("powerpc/tm: Set MSR[TS] just prior to recheckpoint")
moved a code block around and this block uses a 'msr' variable outside of
the CONFIG_PPC_TRANSACTIONAL_MEM, however the 'msr' variable is declared
inside a CONFIG_PPC_TRANSACTIONAL_MEM block, causing a possible error when
CONFIG_PPC_TRANSACTION_MEM is not defined.
error: 'msr' undeclared (first use in this function)
This is not causing a compilation error in the mainline kernel, because
'msr' is being used as an argument of MSR_TM_ACTIVE(), which is defined as
the following when CONFIG_PPC_TRANSACTIONAL_MEM is *not* set:
#define MSR_TM_ACTIVE(x) 0
This patch just fixes this issue avoiding the 'msr' variable usage outside
the CONFIG_PPC_TRANSACTIONAL_MEM block, avoiding trusting in the
MSR_TM_ACTIVE() definition.
Cc: stable@vger.kernel.org
Reported-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Fixes: e1c3743e1a ("powerpc/tm: Set MSR[TS] just prior to recheckpoint")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 8c8c10b90d ("powerpc/8xx: fix handling of early NULL pointer
dereference") moved the loading of r6 earlier in the code. As some
functions are called inbetween, r6 needs to be loaded again with the
address of swapper_pg_dir in order to set PTE pointers for
the Abatron BDI.
Fixes: 8c8c10b90d ("powerpc/8xx: fix handling of early NULL pointer dereference")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There is a typo so we accidentally allocate enough memory for a pointer
when we wanted to allocate enough for a struct.
Fixes: 0bd971676e ("powerpc/powernv/npu: Add compound IOMMU groups")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We already need to zero out memory for dma_alloc_coherent(), as such
using dma_zalloc_coherent() is superflous. Phase it out.
This change was generated with the following Coccinelle SmPL patch:
@ replace_dma_zalloc_coherent @
expression dev, size, data, handle, flags;
@@
-dma_zalloc_coherent(dev, size, handle, flags)
+dma_alloc_coherent(dev, size, handle, flags)
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
[hch: re-ran the script on the latest tree]
Signed-off-by: Christoph Hellwig <hch@lst.de>
On each sample, Monitor Mode Control Register A (MMCRA) content is
saved in pt_regs. MMCRA does not have a entry as-is in the pt_regs but
instead, MMCRA content is saved in the "dsisr" register of pt_regs.
Patch adds another entry to the perf_regs structure to include the
"MMCRA" printing which internally maps to the "dsisr" of pt_regs.
It also check for the MMCRA availability in the platform and present
value accordingly
mpe: This was the 2nd patch in a series with commit 333804dc3b
("powerpc/perf: Update perf_regs structure to include SIER") but I
accidentally only merged the 1st patch, so merge this one now.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Persistent memory, as described by the ACPI NFIT (NVDIMM Firmware
Interface Table), is the first known instance of a memory range
described by a unique "target" proximity domain. Where "initiator" and
"target" proximity domains is an approach that the ACPI HMAT
(Heterogeneous Memory Attributes Table) uses to described the unique
performance properties of a memory range relative to a given initiator
(e.g. CPU or DMA device).
Currently the numa-node for a /dev/pmemX block-device or /dev/daxX.Y
char-device follows the traditional notion of 'numa-node' where the
attribute conveys the closest online numa-node. That numa-node attribute
is useful for cpu-binding and memory-binding processes *near* the
device. However, when the memory range backing a 'pmem', or 'dax' device
is onlined (memory hot-add) the memory-only-numa-node representing that
address needs to be differentiated from the set of online nodes. In
other words, the numa-node association of the device depends on whether
you can bind processes *near* the cpu-numa-node in the offline
device-case, or bind process *on* the memory-range directly after the
backing address range is onlined.
Allow for the case that platform firmware describes persistent memory
with a unique proximity domain, i.e. when it is distinct from the
proximity of DRAM and CPUs that are on the same socket. Plumb the Linux
numa-node translation of that proximity through the libnvdimm region
device to namespaces that are in device-dax mode. With this in place the
proposed kmem driver [1] can optionally discover a unique numa-node
number for the address range as it transitions the memory from an
offline state managed by a device-driver to an online memory range
managed by the core-mm.
[1]: https://lore.kernel.org/lkml/20181022201317.8558C1D8@viggo.jf.intel.com
Reported-by: Fan Du <fan.du@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Oliver O'Halloran" <oohall@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Now that Kbuild automatically creates asm-generic wrappers for missing
mandatory headers, it is redundant to list the same headers in
generic-y and mandatory-y.
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
These comments are leftovers of commit fcc8487d47 ("uapi: export all
headers under uapi directories").
Prior to that commit, exported headers must be explicitly added to
header-y. Now, all headers under the uapi/ directories are exported.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, CONFIG_JUMP_LABEL just means "I _want_ to use jump label".
The jump label is controlled by HAVE_JUMP_LABEL, which is defined
like this:
#if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL)
# define HAVE_JUMP_LABEL
#endif
We can improve this by testing 'asm goto' support in Kconfig, then
make JUMP_LABEL depend on CC_HAS_ASM_GOTO.
Ugly #ifdef HAVE_JUMP_LABEL will go away, and CONFIG_JUMP_LABEL will
match to the real kernel capability.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
A fix for the recent access_ok() change, which broke the build. We recently
added a use of type in order to squash a warning elsewhere about type being
unused.
A handful of other minor build fixes, and one defconfig update.
Thanks to:
Christian Lamparter, Christophe Leroy, Diana Craciun, Mathieu Malaterre.
-----BEGIN PGP SIGNATURE-----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=0vml
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A fix for the recent access_ok() change, which broke the build. We
recently added a use of type in order to squash a warning elsewhere
about type being unused.
A handful of other minor build fixes, and one defconfig update.
Thanks to: Christian Lamparter, Christophe Leroy, Diana Craciun,
Mathieu Malaterre"
* tag 'powerpc-4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Drop use of 'type' from access_ok()
KVM: PPC: Book3S HV: radix: Fix uninitialized var build error
powerpc/configs: Add PPC4xx_OCM to ppc40x_defconfig
powerpc/4xx/ocm: Fix phys_addr_t printf warnings
powerpc/4xx/ocm: Fix compilation error due to PAGE_KERNEL usage
powerpc/fsl: Fixed warning: orphan section `__btb_flush_fixup'
Merge more updates from Andrew Morton:
- procfs updates
- various misc bits
- lib/ updates
- epoll updates
- autofs
- fatfs
- a few more MM bits
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (58 commits)
mm/page_io.c: fix polled swap page in
checkpatch: add Co-developed-by to signature tags
docs: fix Co-Developed-by docs
drivers/base/platform.c: kmemleak ignore a known leak
fs: don't open code lru_to_page()
fs/: remove caller signal_pending branch predictions
mm/: remove caller signal_pending branch predictions
arch/arc/mm/fault.c: remove caller signal_pending_branch predictions
kernel/sched/: remove caller signal_pending branch predictions
kernel/locking/mutex.c: remove caller signal_pending branch predictions
mm: select HAVE_MOVE_PMD on x86 for faster mremap
mm: speed up mremap by 20x on large regions
mm: treewide: remove unused address argument from pte_alloc functions
initramfs: cleanup incomplete rootfs
scripts/gdb: fix lx-version string output
kernel/kcov.c: mark write_comp_data() as notrace
kernel/sysctl: add panic_print into sysctl
panic: add options to print system info when panic happens
bfs: extra sanity checking and static inode bitmap
exec: separate MM_ANONPAGES and RLIMIT_STACK accounting
...
Patch series "Add support for fast mremap".
This series speeds up the mremap(2) syscall by copying page tables at
the PMD level even for non-THP systems. There is concern that the extra
'address' argument that mremap passes to pte_alloc may do something
subtle architecture related in the future that may make the scheme not
work. Also we find that there is no point in passing the 'address' to
pte_alloc since its unused. This patch therefore removes this argument
tree-wide resulting in a nice negative diff as well. Also ensuring
along the way that the enabled architectures do not do anything funky
with the 'address' argument that goes unnoticed by the optimization.
Build and boot tested on x86-64. Build tested on arm64. The config
enablement patch for arm64 will be posted in the future after more
testing.
The changes were obtained by applying the following Coccinelle script.
(thanks Julia for answering all Coccinelle questions!).
Following fix ups were done manually:
* Removal of address argument from pte_fragment_alloc
* Removal of pte_alloc_one_fast definitions from m68k and microblaze.
// Options: --include-headers --no-includes
// Note: I split the 'identifier fn' line, so if you are manually
// running it, please unsplit it so it runs for you.
virtual patch
@pte_alloc_func_def depends on patch exists@
identifier E2;
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
type T2;
@@
fn(...
- , T2 E2
)
{ ... }
@pte_alloc_func_proto_noarg depends on patch exists@
type T1, T2, T3, T4;
identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
@@
(
- T3 fn(T1, T2);
+ T3 fn(T1);
|
- T3 fn(T1, T2, T4);
+ T3 fn(T1, T2);
)
@pte_alloc_func_proto depends on patch exists@
identifier E1, E2, E4;
type T1, T2, T3, T4;
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
@@
(
- T3 fn(T1 E1, T2 E2);
+ T3 fn(T1 E1);
|
- T3 fn(T1 E1, T2 E2, T4 E4);
+ T3 fn(T1 E1, T2 E2);
)
@pte_alloc_func_call depends on patch exists@
expression E2;
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
@@
fn(...
-, E2
)
@pte_alloc_macro depends on patch exists@
identifier fn =~
"^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$";
identifier a, b, c;
expression e;
position p;
@@
(
- #define fn(a, b, c) e
+ #define fn(a, b) e
|
- #define fn(a, b) e
+ #define fn(a) e
)
Link: http://lkml.kernel.org/r/20181108181201.88826-2-joelaf@google.com
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Suggested-by: Kirill A. Shutemov <kirill@shutemov.name>
Acked-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These two architectures actually had an intentional use of the 'type'
argument to access_ok() just to avoid warnings.
I had actually noticed the powerpc one, but forgot to then fix it up.
And I missed the sparc32 case entirely.
This is hopefully all of it.
Reported-by: Mathieu Malaterre <malat@debian.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 96d4f267e4 ("Remove 'type' argument from access_ok() function")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In commit 05a4ab8239 ("powerpc/uaccess: fix warning/error with
access_ok()") an attempt was made to remove a warning by referencing
the variable `type`. However in commit 96d4f267e4 ("Remove 'type'
argument from access_ok() function") the variable `type` has been
removed, breaking the build:
arch/powerpc/include/asm/uaccess.h:66:32: error: ‘type’ undeclared (first use in this function)
This essentially reverts commit 05a4ab8239 ("powerpc/uaccess: fix
warning/error with access_ok()") to fix the error.
Fixes: 96d4f267e4 ("Remove 'type' argument from access_ok() function")
Signed-off-by: Mathieu Malaterre <malat@debian.org>
[mpe: Reword change log slightly.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Including (in no particular order):
- Page table code for AMD IOMMU now supports large pages where
smaller page-sizes were mapped before. VFIO had to work around
that in the past and I included a patch to remove it (acked by
Alex Williamson)
- Patches to unmodularize a couple of IOMMU drivers that would
never work as modules anyway.
- Work to unify the the iommu-related pointers in
'struct device' into one pointer. This work is not finished
yet, but will probably be in the next cycle.
- NUMA aware allocation in iommu-dma code
- Support for r8a774a1 and r8a774c0 in the Renesas IOMMU driver
- Scalable mode support for the Intel VT-d driver
- PM runtime improvements for the ARM-SMMU driver
- Support for the QCOM-SMMUv2 IOMMU hardware from Qualcom
- Various smaller fixes and improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABAgAGBQJcKkEoAAoJECvwRC2XARrjCCoQAJxsgaAF5Z0s7z8j2A9SkaGp
SIMnUAI5mDOdyhTOAI+eehpRzg5UVYt/JjFYnHz8HWqbSc8YOvDvHafmhMFIwYvO
hq5knbs6ns2jJNFO+M4dioDq+3THdqkGIF5xoHdGTP7cn9+XyQ8lAoHo0RuL122U
PJGqX7Cp4XnFP4HMb3uQYhVeBV7mU+XqAdB+4aDnQkzI5LkQCRr74GcqOm+Rlnyc
cmQWc2arUMjgc1TJIrex8dx9dT6lq8kOmhyEg/IjHeGaZyJ3HqA+30XDDLEExN0G
MeVawuxJz40HgXlkXr+iZTQtIFYkXdKvJH6rptMbOfbDeDz+YZ01TbtAMMH9o4jX
yxjjMjdcWTsWYQ/MHHdsoMP34cajCi/EYPMNksbycw+E3Y+X/bSReCoWC0HUK8/+
Z4TpZ9mZVygtJR+QNZ+pE9oiJpb4sroM10zTnbMoVHNnvfsO01FYk7FMPkolSKLw
zB4MDswQYgchoFR9Z4ZB4PycYTzeafLKYgDPDoD1vIJgDavuidwvDWDRTDc+aMWM
siIIewq19To9jDJkVjX4dsT/p99KVKgAR/Ps6jjWkAroha7g6GcmlYZHIJnyop04
jiaSXUsk8aRucP/CRz5xdMmaGoN7BsNmpUjcrquc6Povk/6gvXvpY04oCs1+gNMX
ipL9E3GTFCVBubRFrksv
=DT9A
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
- Page table code for AMD IOMMU now supports large pages where smaller
page-sizes were mapped before. VFIO had to work around that in the
past and I included a patch to remove it (acked by Alex Williamson)
- Patches to unmodularize a couple of IOMMU drivers that would never
work as modules anyway.
- Work to unify the the iommu-related pointers in 'struct device' into
one pointer. This work is not finished yet, but will probably be in
the next cycle.
- NUMA aware allocation in iommu-dma code
- Support for r8a774a1 and r8a774c0 in the Renesas IOMMU driver
- Scalable mode support for the Intel VT-d driver
- PM runtime improvements for the ARM-SMMU driver
- Support for the QCOM-SMMUv2 IOMMU hardware from Qualcom
- Various smaller fixes and improvements
* tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (78 commits)
iommu: Check for iommu_ops == NULL in iommu_probe_device()
ACPI/IORT: Don't call iommu_ops->add_device directly
iommu/of: Don't call iommu_ops->add_device directly
iommu: Consolitate ->add/remove_device() calls
iommu/sysfs: Rename iommu_release_device()
dmaengine: sh: rcar-dmac: Use device_iommu_mapped()
xhci: Use device_iommu_mapped()
powerpc/iommu: Use device_iommu_mapped()
ACPI/IORT: Use device_iommu_mapped()
iommu/of: Use device_iommu_mapped()
driver core: Introduce device_iommu_mapped() function
iommu/tegra: Use helper functions to access dev->iommu_fwspec
iommu/qcom: Use helper functions to access dev->iommu_fwspec
iommu/of: Use helper functions to access dev->iommu_fwspec
iommu/mediatek: Use helper functions to access dev->iommu_fwspec
iommu/ipmmu-vmsa: Use helper functions to access dev->iommu_fwspec
iommu/dma: Use helper functions to access dev->iommu_fwspec
iommu/arm-smmu: Use helper functions to access dev->iommu_fwspec
ACPI/IORT: Use helper functions to access dev->iommu_fwspec
iommu: Introduce wrappers around dev->iommu_fwspec
...
Mostly clean ups although whilst Doug's was chasing down a odd
lockdep warning he also did some work to improved debugger resilience
when some CPUs fail to respond to the round up request.
The main changes are:
* Fixing a lockdep warning on architectures that cannot use an NMI for
the round up plus related changes to make CPU round up and all CPU
backtrace more resilient.
* Constify the arch ops tables
* A couple of other small clean ups
Two of the three patchsets here include changes that spill over into
arch/. Changes in the arch space are relatively narrow in scope
(and directly related to kgdb). Didn't get comprehensive acks but
all impacted maintainers were Cc:ed in good time.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
-----BEGIN PGP SIGNATURE-----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=Aqlc
-----END PGP SIGNATURE-----
Merge tag 'kgdb-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"Mostly clean ups although while Doug's was chasing down a odd lockdep
warning he also did some work to improved debugger resilience when
some CPUs fail to respond to the round up request.
The main changes are:
- Fixing a lockdep warning on architectures that cannot use an NMI
for the round up plus related changes to make CPU round up and all
CPU backtrace more resilient.
- Constify the arch ops tables
- A couple of other small clean ups
Two of the three patchsets here include changes that spill over into
arch/. Changes in the arch space are relatively narrow in scope (and
directly related to kgdb). Didn't get comprehensive acks but all
impacted maintainers were Cc:ed in good time"
* tag 'kgdb-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kgdb/treewide: constify struct kgdb_arch arch_kgdb_ops
mips/kgdb: prepare arch_kgdb_ops for constness
kdb: use bool for binary state indicators
kdb: Don't back trace on a cpu that didn't round up
kgdb: Don't round up a CPU that failed rounding up before
kgdb: Fix kgdb_roundup_cpus() for arches who used smp_call_function()
kgdb: Remove irq flags from roundup
- Rework of the kprobe/uprobe and synthetic events to consolidate all
the dynamic event code. This will make changes in the future easier.
- Partial rewrite of the function graph tracing infrastructure.
This will allow for multiple users of hooking onto functions
to get the callback (return) of the function. This is the ground
work for having kprobes and function graph tracer using one code base.
- Clean up of the histogram code that will facilitate adding more
features to the histograms in the future.
- Addition of str_has_prefix() and a few use cases. There currently
is a similar function strstart() that is used in a few places, but
only returns a bool and not a length. These instances will be
removed in the future to use str_has_prefix() instead.
- A few other various clean ups as well.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXCawlBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qhbcAQCFeT0fWWTUxofBQz5jqsHaRnVg21+9
X4sTldYRYEn4YgEAmWOyiwq7zvrsAu4ZwkNBMeqxn3tVymYHiGOGe3Y4BAw=
=u96o
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Rework of the kprobe/uprobe and synthetic events to consolidate all
the dynamic event code. This will make changes in the future easier.
- Partial rewrite of the function graph tracing infrastructure. This
will allow for multiple users of hooking onto functions to get the
callback (return) of the function. This is the ground work for having
kprobes and function graph tracer using one code base.
- Clean up of the histogram code that will facilitate adding more
features to the histograms in the future.
- Addition of str_has_prefix() and a few use cases. There currently is
a similar function strstart() that is used in a few places, but only
returns a bool and not a length. These instances will be removed in
the future to use str_has_prefix() instead.
- A few other various clean ups as well.
* tag 'trace-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (57 commits)
tracing: Use the return of str_has_prefix() to remove open coded numbers
tracing: Have the historgram use the result of str_has_prefix() for len of prefix
tracing: Use str_has_prefix() instead of using fixed sizes
tracing: Use str_has_prefix() helper for histogram code
string.h: Add str_has_prefix() helper function
tracing: Make function ‘ftrace_exports’ static
tracing: Simplify printf'ing in seq_print_sym
tracing: Avoid -Wformat-nonliteral warning
tracing: Merge seq_print_sym_short() and seq_print_sym_offset()
tracing: Add hist trigger comments for variable-related fields
tracing: Remove hist trigger synth_var_refs
tracing: Use hist trigger's var_ref array to destroy var_refs
tracing: Remove open-coding of hist trigger var_ref management
tracing: Use var_refs[] for hist trigger reference checking
tracing: Change strlen to sizeof for hist trigger static strings
tracing: Remove unnecessary hist trigger struct field
tracing: Fix ftrace_graph_get_ret_stack() to use task and not current
seq_buf: Use size_t for len in seq_buf_puts()
seq_buf: Make seq_buf_puts() null-terminate the buffer
arm64: Use ftrace_graph_get_ret_stack() instead of curr_ret_stack
...
checkpatch.pl reports the following:
WARNING: struct kgdb_arch should normally be const
#28: FILE: arch/mips/kernel/kgdb.c:397:
+struct kgdb_arch arch_kgdb_ops = {
This report makes sense, as all other ops struct, this
one should also be const. This patch does the change.
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: x86@kernel.org
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
When I had lockdep turned on and dropped into kgdb I got a nice splat
on my system. Specifically it hit:
DEBUG_LOCKS_WARN_ON(current->hardirq_context)
Specifically it looked like this:
sysrq: SysRq : DEBUG
------------[ cut here ]------------
DEBUG_LOCKS_WARN_ON(current->hardirq_context)
WARNING: CPU: 0 PID: 0 at .../kernel/locking/lockdep.c:2875 lockdep_hardirqs_on+0xf0/0x160
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.0 #27
pstate: 604003c9 (nZCv DAIF +PAN -UAO)
pc : lockdep_hardirqs_on+0xf0/0x160
...
Call trace:
lockdep_hardirqs_on+0xf0/0x160
trace_hardirqs_on+0x188/0x1ac
kgdb_roundup_cpus+0x14/0x3c
kgdb_cpu_enter+0x53c/0x5cc
kgdb_handle_exception+0x180/0x1d4
kgdb_compiled_brk_fn+0x30/0x3c
brk_handler+0x134/0x178
do_debug_exception+0xfc/0x178
el1_dbg+0x18/0x78
kgdb_breakpoint+0x34/0x58
sysrq_handle_dbg+0x54/0x5c
__handle_sysrq+0x114/0x21c
handle_sysrq+0x30/0x3c
qcom_geni_serial_isr+0x2dc/0x30c
...
...
irq event stamp: ...45
hardirqs last enabled at (...44): [...] __do_softirq+0xd8/0x4e4
hardirqs last disabled at (...45): [...] el1_irq+0x74/0x130
softirqs last enabled at (...42): [...] _local_bh_enable+0x2c/0x34
softirqs last disabled at (...43): [...] irq_exit+0xa8/0x100
---[ end trace adf21f830c46e638 ]---
Looking closely at it, it seems like a really bad idea to be calling
local_irq_enable() in kgdb_roundup_cpus(). If nothing else that seems
like it could violate spinlock semantics and cause a deadlock.
Instead, let's use a private csd alongside
smp_call_function_single_async() to round up the other CPUs. Using
smp_call_function_single_async() doesn't require interrupts to be
enabled so we can remove the offending bit of code.
In order to avoid duplicating this across all the architectures that
use the default kgdb_roundup_cpus(), we'll add a "weak" implementation
to debug_core.c.
Looking at all the people who previously had copies of this code,
there were a few variants. I've attempted to keep the variants
working like they used to. Specifically:
* For arch/arc we passed NULL to kgdb_nmicallback() instead of
get_irq_regs().
* For arch/mips there was a bit of extra code around
kgdb_nmicallback()
NOTE: In this patch we will still get into trouble if we try to round
up a CPU that failed to round up before. We'll try to round it up
again and potentially hang when we try to grab the csd lock. That's
not new behavior but we'll still try to do better in a future patch.
Suggested-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
The function kgdb_roundup_cpus() was passed a parameter that was
documented as:
> the flags that will be used when restoring the interrupts. There is
> local_irq_save() call before kgdb_roundup_cpus().
Nobody used those flags. Anyone who wanted to temporarily turn on
interrupts just did local_irq_enable() and local_irq_disable() without
looking at them. So we can definitely remove the flags.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Old GCCs (4.6.3 at least), aren't able to follow the logic in
__kvmhv_copy_tofrom_guest_radix() and warn that old_pid is used
uninitialized:
arch/powerpc/kvm/book3s_64_mmu_radix.c:75:3: error: 'old_pid' may be
used uninitialized in this function
The logic is OK, we only use old_pid if quadrant == 1, and in that
case it has definitely be initialised, eg:
if (quadrant == 1) {
old_pid = mfspr(SPRN_PID);
...
if (quadrant == 1 && pid != old_pid)
mtspr(SPRN_PID, old_pid);
Annotate it to fix the error.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There was recently a compilation break to this driver, but we didn't
notice because none of our defconfigs have it enabled. Fix that.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently the code produces several warnings, eg:
arch/powerpc/platforms/4xx/ocm.c:240:38: error: format '%llx'
expects argument of type 'long long unsigned int', but argument 3
has type 'phys_addr_t {aka unsigned int}'
seq_printf(m, "PhysAddr : 0x%llx\n", ocm->phys);
~~~^ ~~~~~~~~~
Fix it by using the special %pa[p] format for printing phys_addr_t.
Note we need to pass the value by reference for the special specifier
to work.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Fixed the following build warning:
powerpc-linux-gnu-ld: warning: orphan section `__btb_flush_fixup' from
`arch/powerpc/kernel/head_44x.o' being placed in section
`__btb_flush_fixup'.
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Consolidation of bus (PCI, PCMCIA, EISA, RapidIO) config entries
by Christoph Hellwig.
Currently, every architecture that wants to provide common peripheral
busses needs to add some boilerplate code and include the right Kconfig
files. This series instead just selects the presence (when needed) and
then handles everything in the bus-specific Kconfig file under drivers/.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=WxId
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig file consolidation from Masahiro Yamada:
"Consolidation of bus (PCI, PCMCIA, EISA, RapidIO) config entries by
Christoph Hellwig.
Currently, every architecture that wants to provide common peripheral
busses needs to add some boilerplate code and include the right
Kconfig files. This series instead just selects the presence (when
needed) and then handles everything in the bus-specific Kconfig file
under drivers/"
* tag 'kconfig-v4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
pcmcia: remove per-arch PCMCIA config entry
eisa: consolidate EISA Kconfig entry in drivers/eisa
rapidio: consolidate RAPIDIO config entry in drivers/rapidio
pcmcia: allow PCMCIA support independent of the architecture
PCI: consolidate the PCI_SYSCALL symbol
PCI: consolidate the PCI_DOMAINS and PCI_DOMAINS_GENERIC config options
PCI: consolidate PCI config entry in drivers/pci
MIPS: remove the HT_PCI config option
- support -y option for merge_config.sh to avoid downgrading =y to =m
- remove S_OTHER symbol type, and touch include/config/*.h files correctly
- fix file name and line number in lexer warnings
- fix memory leak when EOF is encountered in quotation
- resolve all shift/reduce conflicts of the parser
- warn no new line at end of file
- make 'source' statement more strict to take only string literal
- rewrite the lexer and remove the keyword lookup table
- convert to SPDX License Identifier
- compile C files independently instead of including them from zconf.y
- fix various warnings of gconfig
- misc cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=r3Fl
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- support -y option for merge_config.sh to avoid downgrading =y to =m
- remove S_OTHER symbol type, and touch include/config/*.h files correctly
- fix file name and line number in lexer warnings
- fix memory leak when EOF is encountered in quotation
- resolve all shift/reduce conflicts of the parser
- warn no new line at end of file
- make 'source' statement more strict to take only string literal
- rewrite the lexer and remove the keyword lookup table
- convert to SPDX License Identifier
- compile C files independently instead of including them from zconf.y
- fix various warnings of gconfig
- misc cleanups
* tag 'kconfig-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
kconfig: surround dbg_sym_flags with #ifdef DEBUG to fix gconf warning
kconfig: split images.c out of qconf.cc/gconf.c to fix gconf warnings
kconfig: add static qualifiers to fix gconf warnings
kconfig: split the lexer out of zconf.y
kconfig: split some C files out of zconf.y
kconfig: convert to SPDX License Identifier
kconfig: remove keyword lookup table entirely
kconfig: update current_pos in the second lexer
kconfig: switch to ASSIGN_VAL state in the second lexer
kconfig: stop associating kconf_id with yylval
kconfig: refactor end token rules
kconfig: stop supporting '.' and '/' in unquoted words
treewide: surround Kconfig file paths with double quotes
microblaze: surround string default in Kconfig with double quotes
kconfig: use T_WORD instead of T_VARIABLE for variables
kconfig: use specific tokens instead of T_ASSIGN for assignments
kconfig: refactor scanning and parsing "option" properties
kconfig: use distinct tokens for type and default properties
kconfig: remove redundant token defines
kconfig: rename depends_list to comment_option_list
...
Pull Devicetree updates from Rob Herring:
"The biggest highlight here is the start of using json-schema for DT
bindings. Being able to validate bindings has been discussed for years
with little progress.
- Initial support for DT bindings using json-schema language. This is
the start of converting DT bindings from free-form text to a
structured format.
- Reworking of initrd address initialization. This moves to using the
phys address instead of virt addr in the DT parsing code. This
rework was motivated by CONFIG_DEV_BLK_INITRD causing unnecessary
rebuilding of lots of files.
- Fix stale phandle entries in phandle cache
- DT overlay validation improvements. This exposed several memory
leak bugs which have been fixed.
- Use node name and device_type helper functions in DT code
- Last remaining conversions to using %pOFn printk specifier instead
of device_node.name directly
- Create new common RTC binding doc and move all trivial RTC devices
out of trivial-devices.txt.
- New bindings for Freescale MAG3110 magnetometer, Cadence Sierra
PHY, and Xen shared memory
- Update dtc to upstream version v1.4.7-57-gf267e674d145"
* tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (68 commits)
of: __of_detach_node() - remove node from phandle cache
of: of_node_get()/of_node_put() nodes held in phandle cache
gpio-omap.txt: add reg and interrupts properties
dt-bindings: mrvl,intc: fix a trivial typo
dt-bindings: iio: magnetometer: add dt-bindings for freescale mag3110
dt-bindings: Convert trivial-devices.txt to json-schema
dt-bindings: arm: mrvl: amend Browstone compatible string
dt-bindings: arm: Convert Tegra board/soc bindings to json-schema
dt-bindings: arm: Convert ZTE board/soc bindings to json-schema
dt-bindings: arm: Add missing Xilinx boards
dt-bindings: arm: Convert Xilinx board/soc bindings to json-schema
dt-bindings: arm: Convert VIA board/soc bindings to json-schema
dt-bindings: arm: Convert ST STi board/soc bindings to json-schema
dt-bindings: arm: Convert SPEAr board/soc bindings to json-schema
dt-bindings: arm: Convert CSR SiRF board/soc bindings to json-schema
dt-bindings: arm: Convert QCom board/soc bindings to json-schema
dt-bindings: arm: Convert TI nspire board/soc bindings to json-schema
dt-bindings: arm: Convert TI davinci board/soc bindings to json-schema
dt-bindings: arm: Convert Calxeda board/soc bindings to json-schema
dt-bindings: arm: Convert Altera board/soc bindings to json-schema
...
Merge misc updates from Andrew Morton:
- large KASAN update to use arm's "software tag-based mode"
- a few misc things
- sh updates
- ocfs2 updates
- just about all of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (167 commits)
kernel/fork.c: mark 'stack_vm_area' with __maybe_unused
memcg, oom: notify on oom killer invocation from the charge path
mm, swap: fix swapoff with KSM pages
include/linux/gfp.h: fix typo
mm/hmm: fix memremap.h, move dev_page_fault_t callback to hmm
hugetlbfs: Use i_mmap_rwsem to fix page fault/truncate race
hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization
memory_hotplug: add missing newlines to debugging output
mm: remove __hugepage_set_anon_rmap()
include/linux/vmstat.h: remove unused page state adjustment macro
mm/page_alloc.c: allow error injection
mm: migrate: drop unused argument of migrate_page_move_mapping()
blkdev: avoid migration stalls for blkdev pages
mm: migrate: provide buffer_migrate_page_norefs()
mm: migrate: move migrate_page_lock_buffers()
mm: migrate: lock buffers before migrate_page_move_mapping()
mm: migration: factor out code to compute expected number of page references
mm, page_alloc: enable pcpu_drain with zone capability
kmemleak: add config to select auto scan
mm/page_alloc.c: don't call kasan_free_pages() at deferred mem init
...
A huge update this time, but a lot of that is just consolidating or
removing code:
- provide a common DMA_MAPPING_ERROR definition and avoid indirect
calls for dma_map_* error checking
- use direct calls for the DMA direct mapping case, avoiding huge
retpoline overhead for high performance workloads
- merge the swiotlb dma_map_ops into dma-direct
- provide a generic remapping DMA consistent allocator for architectures
that have devices that perform DMA that is not cache coherent. Based
on the existing arm64 implementation and also used for csky now.
- improve the dma-debug infrastructure, including dynamic allocation
of entries (Robin Murphy)
- default to providing chaining scatterlist everywhere, with opt-outs
for the few architectures (alpha, parisc, most arm32 variants) that
can't cope with it
- misc sparc32 dma-related cleanups
- remove the dma_mark_clean arch hook used by swiotlb on ia64 and
replace it with the generic noncoherent infrastructure
- fix the return type of dma_set_max_seg_size (Niklas Söderlund)
- move the dummy dma ops for not DMA capable devices from arm64 to
common code (Robin Murphy)
- ensure dma_alloc_coherent returns zeroed memory to avoid kernel data
leaks through userspace. We already did this for most common
architectures, but this ensures we do it everywhere.
dma_zalloc_coherent has been deprecated and can hopefully be
removed after -rc1 with a coccinelle script.
-----BEGIN PGP SIGNATURE-----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=in72
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping
Pull DMA mapping updates from Christoph Hellwig:
"A huge update this time, but a lot of that is just consolidating or
removing code:
- provide a common DMA_MAPPING_ERROR definition and avoid indirect
calls for dma_map_* error checking
- use direct calls for the DMA direct mapping case, avoiding huge
retpoline overhead for high performance workloads
- merge the swiotlb dma_map_ops into dma-direct
- provide a generic remapping DMA consistent allocator for
architectures that have devices that perform DMA that is not cache
coherent. Based on the existing arm64 implementation and also used
for csky now.
- improve the dma-debug infrastructure, including dynamic allocation
of entries (Robin Murphy)
- default to providing chaining scatterlist everywhere, with opt-outs
for the few architectures (alpha, parisc, most arm32 variants) that
can't cope with it
- misc sparc32 dma-related cleanups
- remove the dma_mark_clean arch hook used by swiotlb on ia64 and
replace it with the generic noncoherent infrastructure
- fix the return type of dma_set_max_seg_size (Niklas Söderlund)
- move the dummy dma ops for not DMA capable devices from arm64 to
common code (Robin Murphy)
- ensure dma_alloc_coherent returns zeroed memory to avoid kernel
data leaks through userspace. We already did this for most common
architectures, but this ensures we do it everywhere.
dma_zalloc_coherent has been deprecated and can hopefully be
removed after -rc1 with a coccinelle script"
* tag 'dma-mapping-4.21' of git://git.infradead.org/users/hch/dma-mapping: (73 commits)
dma-mapping: fix inverted logic in dma_supported
dma-mapping: deprecate dma_zalloc_coherent
dma-mapping: zero memory returned from dma_alloc_*
sparc/iommu: fix ->map_sg return value
sparc/io-unit: fix ->map_sg return value
arm64: default to the direct mapping in get_arch_dma_ops
PCI: Remove unused attr variable in pci_dma_configure
ia64: only select ARCH_HAS_DMA_COHERENT_TO_PFN if swiotlb is enabled
dma-mapping: bypass indirect calls for dma-direct
vmd: use the proper dma_* APIs instead of direct methods calls
dma-direct: merge swiotlb_dma_ops into the dma_direct code
dma-direct: use dma_direct_map_page to implement dma_direct_map_sg
dma-direct: improve addressability error reporting
swiotlb: remove dma_mark_clean
swiotlb: remove SWIOTLB_MAP_ERROR
ACPI / scan: Refactor _CCA enforcement
dma-mapping: factor out dummy DMA ops
dma-mapping: always build the direct mapping code
dma-mapping: move dma_cache_sync out of line
dma-mapping: move various slow path functions out of line
...
Patch series "Do not touch pages in hot-remove path", v2.
This patchset aims for two things:
1) A better definition about offline and hot-remove stage
2) Solving bugs where we can access non-initialized pages
during hot-remove operations [2] [3].
This is achieved by moving all page/zone handling to the offline
stage, so we do not need to access pages when hot-removing memory.
[1] https://patchwork.kernel.org/cover/10691415/
[2] https://patchwork.kernel.org/patch/10547445/
[3] https://www.spinics.net/lists/linux-mm/msg161316.html
This patch (of 5):
This is a preparation for the following-up patches. The idea of passing
the nid is that it will allow us to get rid of the zone parameter
afterwards.
Link: http://lkml.kernel.org/r/20181127162005.15833-2-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
totalram_pages and totalhigh_pages are made static inline function.
Main motivation was that managed_page_count_lock handling was complicating
things. It was discussed in length here,
https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes
better to remove the lock and convert variables to atomic, with preventing
poteintial store-to-read tearing as a bonus.
[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/1542090790-21750-4-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS <arunks@codeaurora.org>
Suggested-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking updates from David Miller:
1) New ipset extensions for matching on destination MAC addresses, from
Stefano Brivio.
2) Add ipv4 ttl and tos, plus ipv6 flow label and hop limit offloads to
nfp driver. From Stefano Brivio.
3) Implement GRO for plain UDP sockets, from Paolo Abeni.
4) Lots of work from Michał Mirosław to eliminate the VLAN_TAG_PRESENT
bit so that we could support the entire vlan_tci value.
5) Rework the IPSEC policy lookups to better optimize more usecases,
from Florian Westphal.
6) Infrastructure changes eliminating direct manipulation of SKB lists
wherever possible, and to always use the appropriate SKB list
helpers. This work is still ongoing...
7) Lots of PHY driver and state machine improvements and
simplifications, from Heiner Kallweit.
8) Various TSO deferral refinements, from Eric Dumazet.
9) Add ntuple filter support to aquantia driver, from Dmitry Bogdanov.
10) Batch dropping of XDP packets in tuntap, from Jason Wang.
11) Lots of cleanups and improvements to the r8169 driver from Heiner
Kallweit, including support for ->xmit_more. This driver has been
getting some much needed love since he started working on it.
12) Lots of new forwarding selftests from Petr Machata.
13) Enable VXLAN learning in mlxsw driver, from Ido Schimmel.
14) Packed ring support for virtio, from Tiwei Bie.
15) Add new Aquantia AQtion USB driver, from Dmitry Bezrukov.
16) Add XDP support to dpaa2-eth driver, from Ioana Ciocoi Radulescu.
17) Implement coalescing on TCP backlog queue, from Eric Dumazet.
18) Implement carrier change in tun driver, from Nicolas Dichtel.
19) Support msg_zerocopy in UDP, from Willem de Bruijn.
20) Significantly improve garbage collection of neighbor objects when
the table has many PERMANENT entries, from David Ahern.
21) Remove egdev usage from nfp and mlx5, and remove the facility
completely from the tree as it no longer has any users. From Oz
Shlomo and others.
22) Add a NETDEV_PRE_CHANGEADDR so that drivers can veto the change and
therefore abort the operation before the commit phase (which is the
NETDEV_CHANGEADDR event). From Petr Machata.
23) Add indirect call wrappers to avoid retpoline overhead, and use them
in the GRO code paths. From Paolo Abeni.
24) Add support for netlink FDB get operations, from Roopa Prabhu.
25) Support bloom filter in mlxsw driver, from Nir Dotan.
26) Add SKB extension infrastructure. This consolidates the handling of
the auxiliary SKB data used by IPSEC and bridge netfilter, and is
designed to support the needs to MPTCP which could be integrated in
the future.
27) Lots of XDP TX optimizations in mlx5 from Tariq Toukan.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1845 commits)
net: dccp: fix kernel crash on module load
drivers/net: appletalk/cops: remove redundant if statement and mask
bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw
net/net_namespace: Check the return value of register_pernet_subsys()
net/netlink_compat: Fix a missing check of nla_parse_nested
ieee802154: lowpan_header_create check must check daddr
net/mlx4_core: drop useless LIST_HEAD
mlxsw: spectrum: drop useless LIST_HEAD
net/mlx5e: drop useless LIST_HEAD
iptunnel: Set tun_flags in the iptunnel_metadata_reply from src
net/mlx5e: fix semicolon.cocci warnings
staging: octeon: fix build failure with XFRM enabled
net: Revert recent Spectre-v1 patches.
can: af_can: Fix Spectre v1 vulnerability
packet: validate address length if non-zero
nfc: af_nfc: Fix Spectre v1 vulnerability
phonet: af_phonet: Fix Spectre v1 vulnerability
net: core: Fix Spectre v1 vulnerability
net: minor cleanup in skb_ext_add()
net: drop the unused helper skb_ext_get()
...
Notable changes:
- Mitigations for Spectre v2 on some Freescale (NXP) CPUs.
- A large series adding support for pass-through of Nvidia V100 GPUs to guests
on Power9.
- Another large series to enable hardware assistance for TLB table walk on
MPC8xx CPUs.
- Some preparatory changes to our DMA code, to make way for further cleanups
from Christoph.
- Several fixes for our Transactional Memory handling discovered by fuzzing the
signal return path.
- Support for generating our system call table(s) from a text file like other
architectures.
- A fix to our page fault handler so that instead of generating a WARN_ON_ONCE,
user accesses of kernel addresses instead print a ratelimited and
appropriately scary warning.
- A cosmetic change to make our unhandled page fault messages more similar to
other arches and also more compact and informative.
- Freescale updates from Scott:
"Highlights include elimination of legacy clock bindings use from dts
files, an 83xx watchdog handler, fixes to old dts interrupt errors, and
some minor cleanup."
And many clean-ups, reworks and minor fixes etc.
Thanks to:
Alexandre Belloni, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V,
Arnd Bergmann, Benjamin Herrenschmidt, Breno Leitao, Christian Lamparter,
Christophe Leroy, Christoph Hellwig, Daniel Axtens, Darren Stevens, David
Gibson, Diana Craciun, Dmitry V. Levin, Firoz Khan, Geert Uytterhoeven, Greg
Kurz, Gustavo Romero, Hari Bathini, Joel Stanley, Kees Cook, Madhavan
Srinivasan, Mahesh Salgaonkar, Markus Elfring, Mathieu Malaterre, Michal
Suchánek, Naveen N. Rao, Nick Desaulniers, Oliver O'Halloran, Paul Mackerras,
Ram Pai, Ravi Bangoria, Rob Herring, Russell Currey, Sabyasachi Gupta, Sam
Bobroff, Satheesh Rajendran, Scott Wood, Segher Boessenkool, Stephen Rothwell,
Tang Yuantian, Thiago Jung Bauermann, Yangtao Li, Yuantian Tang, Yue Haibing.
-----BEGIN PGP SIGNATURE-----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=cr6s
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- Mitigations for Spectre v2 on some Freescale (NXP) CPUs.
- A large series adding support for pass-through of Nvidia V100 GPUs
to guests on Power9.
- Another large series to enable hardware assistance for TLB table
walk on MPC8xx CPUs.
- Some preparatory changes to our DMA code, to make way for further
cleanups from Christoph.
- Several fixes for our Transactional Memory handling discovered by
fuzzing the signal return path.
- Support for generating our system call table(s) from a text file
like other architectures.
- A fix to our page fault handler so that instead of generating a
WARN_ON_ONCE, user accesses of kernel addresses instead print a
ratelimited and appropriately scary warning.
- A cosmetic change to make our unhandled page fault messages more
similar to other arches and also more compact and informative.
- Freescale updates from Scott:
"Highlights include elimination of legacy clock bindings use from
dts files, an 83xx watchdog handler, fixes to old dts interrupt
errors, and some minor cleanup."
And many clean-ups, reworks and minor fixes etc.
Thanks to: Alexandre Belloni, Alexey Kardashevskiy, Andrew Donnellan,
Aneesh Kumar K.V, Arnd Bergmann, Benjamin Herrenschmidt, Breno Leitao,
Christian Lamparter, Christophe Leroy, Christoph Hellwig, Daniel
Axtens, Darren Stevens, David Gibson, Diana Craciun, Dmitry V. Levin,
Firoz Khan, Geert Uytterhoeven, Greg Kurz, Gustavo Romero, Hari
Bathini, Joel Stanley, Kees Cook, Madhavan Srinivasan, Mahesh
Salgaonkar, Markus Elfring, Mathieu Malaterre, Michal Suchánek, Naveen
N. Rao, Nick Desaulniers, Oliver O'Halloran, Paul Mackerras, Ram Pai,
Ravi Bangoria, Rob Herring, Russell Currey, Sabyasachi Gupta, Sam
Bobroff, Satheesh Rajendran, Scott Wood, Segher Boessenkool, Stephen
Rothwell, Tang Yuantian, Thiago Jung Bauermann, Yangtao Li, Yuantian
Tang, Yue Haibing"
* tag 'powerpc-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (201 commits)
Revert "powerpc/fsl_pci: simplify fsl_pci_dma_set_mask"
powerpc/zImage: Also check for stdout-path
powerpc: Fix HMIs on big-endian with CONFIG_RELOCATABLE=y
macintosh: Use of_node_name_{eq, prefix} for node name comparisons
ide: Use of_node_name_eq for node name comparisons
powerpc: Use of_node_name_eq for node name comparisons
powerpc/pseries/pmem: Convert to %pOFn instead of device_node.name
powerpc/mm: Remove very old comment in hash-4k.h
powerpc/pseries: Fix node leak in update_lmb_associativity_index()
powerpc/configs/85xx: Enable CONFIG_DEBUG_KERNEL
powerpc/dts/fsl: Fix dtc-flagged interrupt errors
clk: qoriq: add more compatibles strings
powerpc/fsl: Use new clockgen binding
powerpc/83xx: handle machine check caused by watchdog timer
powerpc/fsl-rio: fix spelling mistake "reserverd" -> "reserved"
powerpc/fsl_pci: simplify fsl_pci_dma_set_mask
arch/powerpc/fsl_rmu: Use dma_zalloc_coherent
vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver
vfio_pci: Allow regions to add own capabilities
vfio_pci: Allow mapping extra regions
...
Pull x86 build updates from Ingo Molnar:
- Resolve LLVM build bug by removing redundant GNU specific flag
- Remove obsolete -funit-at-a-time and -fno-unit-at-a-time use from x86
PowerPC and UM.
The UML change was seen and acked by UML maintainer Richard
Weinberger.
* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/um/vdso: Drop implicit common-page-size linker flag
x86, powerpc: Remove -funit-at-a-time compiler option entirely
x86/um: Remove -fno-unit-at-a-time workaround for pre-4.0 GCC
Pull RCU updates from Ingo Molnar:
"The biggest RCU changes in this cycle were:
- Convert RCU's BUG_ON() and similar calls to WARN_ON() and similar.
- Replace calls of RCU-bh and RCU-sched update-side functions to
their vanilla RCU counterparts. This series is a step towards
complete removal of the RCU-bh and RCU-sched update-side functions.
( Note that some of these conversions are going upstream via their
respective maintainers. )
- Documentation updates, including a number of flavor-consolidation
updates from Joel Fernandes.
- Miscellaneous fixes.
- Automate generation of the initrd filesystem used for rcutorture
testing.
- Convert spin_is_locked() assertions to instead use lockdep.
( Note that some of these conversions are going upstream via their
respective maintainers. )
- SRCU updates, especially including a fix from Dennis Krein for a
bag-on-head-class bug.
- RCU torture-test updates"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (112 commits)
rcutorture: Don't do busted forward-progress testing
rcutorture: Use 100ms buckets for forward-progress callback histograms
rcutorture: Recover from OOM during forward-progress tests
rcutorture: Print forward-progress test age upon failure
rcutorture: Print time since GP end upon forward-progress failure
rcutorture: Print histogram of CB invocation at OOM time
rcutorture: Print GP age upon forward-progress failure
rcu: Print per-CPU callback counts for forward-progress failures
rcu: Account for nocb-CPU callback counts in RCU CPU stall warnings
rcutorture: Dump grace-period diagnostics upon forward-progress OOM
rcutorture: Prepare for asynchronous access to rcu_fwd_startat
torture: Remove unnecessary "ret" variables
rcutorture: Affinity forward-progress test to avoid housekeeping CPUs
rcutorture: Break up too-long rcu_torture_fwd_prog() function
rcutorture: Remove cbflood facility
torture: Bring any extra CPUs online during kernel startup
rcutorture: Add call_rcu() flooding forward-progress tests
rcutorture/formal: Replace synchronize_sched() with synchronize_rcu()
tools/kernel.h: Replace synchronize_sched() with synchronize_rcu()
net/decnet: Replace rcu_barrier_bh() with rcu_barrier()
...
single-stepping fixes, improved tracing, various timer and vGIC
fixes
* x86: Processor Tracing virtualization, STIBP support, some correctness fixes,
refactorings and splitting of vmx.c, use the Hyper-V range TLB flush hypercall,
reduce order of vcpu struct, WBNOINVD support, do not use -ftrace for __noclone
functions, nested guest support for PAUSE filtering on AMD, more Hyper-V
enlightenments (direct mode for synthetic timers)
* PPC: nested VFIO
* s390: bugfixes only this time
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJcH0vFAAoJEL/70l94x66Dw/wH/2FZp1YOM5OgiJzgqnXyDbyf
dNEfWo472MtNiLsuf+ZAfJojVIu9cv7wtBfXNzW+75XZDfh/J88geHWNSiZDm3Fe
aM4MOnGG0yF3hQrRQyEHe4IFhGFNERax8Ccv+OL44md9CjYrIrsGkRD08qwb+gNh
P8T/3wJEKwUcVHA/1VHEIM8MlirxNENc78p6JKd/C7zb0emjGavdIpWFUMr3SNfs
CemabhJUuwOYtwjRInyx1y34FzYwW3Ejuc9a9UoZ+COahUfkuxHE8u+EQS7vLVF6
2VGVu5SA0PqgmLlGhHthxLqVgQYo+dB22cRnsLtXlUChtVAq8q9uu5sKzvqEzuE=
=b4Jx
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- selftests improvements
- large PUD support for HugeTLB
- single-stepping fixes
- improved tracing
- various timer and vGIC fixes
x86:
- Processor Tracing virtualization
- STIBP support
- some correctness fixes
- refactorings and splitting of vmx.c
- use the Hyper-V range TLB flush hypercall
- reduce order of vcpu struct
- WBNOINVD support
- do not use -ftrace for __noclone functions
- nested guest support for PAUSE filtering on AMD
- more Hyper-V enlightenments (direct mode for synthetic timers)
PPC:
- nested VFIO
s390:
- bugfixes only this time"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (171 commits)
KVM: x86: Add CPUID support for new instruction WBNOINVD
kvm: selftests: ucall: fix exit mmio address guessing
Revert "compiler-gcc: disable -ftracer for __noclone functions"
KVM: VMX: Move VM-Enter + VM-Exit handling to non-inline sub-routines
KVM: VMX: Explicitly reference RCX as the vmx_vcpu pointer in asm blobs
KVM: x86: Use jmp to invoke kvm_spurious_fault() from .fixup
MAINTAINERS: Add arch/x86/kvm sub-directories to existing KVM/x86 entry
KVM/x86: Use SVM assembly instruction mnemonics instead of .byte streams
KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range()
KVM/MMU: Flush tlb directly in kvm_set_pte_rmapp()
KVM/MMU: Move tlb flush in kvm_set_pte_rmapp() to kvm_mmu_notifier_change_pte()
KVM: Make kvm_set_spte_hva() return int
KVM: Replace old tlb flush function with new one to flush a specified range.
KVM/MMU: Add tlb flush with range helper function
KVM/VMX: Add hv tlb range flush support
x86/hyper-v: Add HvFlushGuestAddressList hypercall support
KVM: Add tlb_remote_flush_with_range callback in kvm_x86_ops
KVM: x86: Disable Intel PT when VMXON in L1 guest
KVM: x86: Set intercept for Intel PT MSRs read/write
KVM: x86: Implement Intel PT MSRs read/write emulation
...
In the end, we ended up with quite a lot more than I expected:
- Support for ARMv8.3 Pointer Authentication in userspace (CRIU and
kernel-side support to come later)
- Support for per-thread stack canaries, pending an update to GCC that
is currently undergoing review
- Support for kexec_file_load(), which permits secure boot of a kexec
payload but also happens to improve the performance of kexec
dramatically because we can avoid the sucky purgatory code from
userspace. Kdump will come later (requires updates to libfdt).
- Optimisation of our dynamic CPU feature framework, so that all
detected features are enabled via a single stop_machine() invocation
- KPTI whitelisting of Cortex-A CPUs unaffected by Meltdown, so that
they can benefit from global TLB entries when KASLR is not in use
- 52-bit virtual addressing for userspace (kernel remains 48-bit)
- Patch in LSE atomics for per-cpu atomic operations
- Custom preempt.h implementation to avoid unconditional calls to
preempt_schedule() from preempt_enable()
- Support for the new 'SB' Speculation Barrier instruction
- Vectorised implementation of XOR checksumming and CRC32 optimisations
- Workaround for Cortex-A76 erratum #1165522
- Improved compatibility with Clang/LLD
- Support for TX2 system PMUS for profiling the L3 cache and DMC
- Reflect read-only permissions in the linear map by default
- Ensure MMIO reads are ordered with subsequent calls to Xdelay()
- Initial support for memory hotplug
- Tweak the threshold when we invalidate the TLB by-ASID, so that
mremap() performance is improved for ranges spanning multiple PMDs.
- Minor refactoring and cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJcE4TmAAoJELescNyEwWM0Nr0H/iaU7/wQSzHyNXtZoImyKTul
Blu2ga4/EqUrTU7AVVfmkl/3NBILWlgQVpY6tH6EfXQuvnxqD7CizbHyLdyO+z0S
B5PsFUH2GLMNAi48AUNqGqkgb2knFbg+T+9IimijDBkKg1G/KhQnRg6bXX32mLJv
Une8oshUPBVJMsHN1AcQknzKariuoE3u0SgJ+eOZ9yA2ZwKxP4yy1SkDt3xQrtI0
lojeRjxcyjTP1oGRNZC+BWUtGOT35p7y6cGTnBd/4TlqBGz5wVAJUcdoxnZ6JYVR
O8+ob9zU+4I0+SKt80s7pTLqQiL9rxkKZ5joWK1pr1g9e0s5N5yoETXKFHgJYP8=
=sYdt
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 festive updates from Will Deacon:
"In the end, we ended up with quite a lot more than I expected:
- Support for ARMv8.3 Pointer Authentication in userspace (CRIU and
kernel-side support to come later)
- Support for per-thread stack canaries, pending an update to GCC
that is currently undergoing review
- Support for kexec_file_load(), which permits secure boot of a kexec
payload but also happens to improve the performance of kexec
dramatically because we can avoid the sucky purgatory code from
userspace. Kdump will come later (requires updates to libfdt).
- Optimisation of our dynamic CPU feature framework, so that all
detected features are enabled via a single stop_machine()
invocation
- KPTI whitelisting of Cortex-A CPUs unaffected by Meltdown, so that
they can benefit from global TLB entries when KASLR is not in use
- 52-bit virtual addressing for userspace (kernel remains 48-bit)
- Patch in LSE atomics for per-cpu atomic operations
- Custom preempt.h implementation to avoid unconditional calls to
preempt_schedule() from preempt_enable()
- Support for the new 'SB' Speculation Barrier instruction
- Vectorised implementation of XOR checksumming and CRC32
optimisations
- Workaround for Cortex-A76 erratum #1165522
- Improved compatibility with Clang/LLD
- Support for TX2 system PMUS for profiling the L3 cache and DMC
- Reflect read-only permissions in the linear map by default
- Ensure MMIO reads are ordered with subsequent calls to Xdelay()
- Initial support for memory hotplug
- Tweak the threshold when we invalidate the TLB by-ASID, so that
mremap() performance is improved for ranges spanning multiple PMDs.
- Minor refactoring and cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (125 commits)
arm64: kaslr: print PHYS_OFFSET in dump_kernel_offset()
arm64: sysreg: Use _BITUL() when defining register bits
arm64: cpufeature: Rework ptr auth hwcaps using multi_entry_cap_matches
arm64: cpufeature: Reduce number of pointer auth CPU caps from 6 to 4
arm64: docs: document pointer authentication
arm64: ptr auth: Move per-thread keys from thread_info to thread_struct
arm64: enable pointer authentication
arm64: add prctl control for resetting ptrauth keys
arm64: perf: strip PAC when unwinding userspace
arm64: expose user PAC bit positions via ptrace
arm64: add basic pointer authentication support
arm64/cpufeature: detect pointer authentication
arm64: Don't trap host pointer auth use to EL2
arm64/kvm: hide ptrauth from guests
arm64/kvm: consistently handle host HCR_EL2 flags
arm64: add pointer authentication register bits
arm64: add comments about EC exception levels
arm64: perf: Treat EXCLUDE_EL* bit definitions as unsigned
arm64: kpti: Whitelist Cortex-A CPUs that don't implement the CSV3 field
arm64: enable per-task stack canaries
...
Freescale updates from Scott:
"Highlights include elimination of legacy clock bindings use from dts
files, an 83xx watchdog handler, fixes to old dts interrupt errors, and
some minor cleanup."
The structure of the ret_stack array on the task struct is going to
change, and accessing it directly via the curr_ret_stack index will no
longer give the ret_stack entry that holds the return address. To access
that, architectures must now use ftrace_graph_get_ret_stack() to get the
associated ret_stack that matches the saved return address.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The /chosen/linux,stdout-path is "deprecated" in favour of
/chosen/stdout-path so we should be checking for both.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
HMIs will crash the kernel due to
BRANCH_LINK_TO_FAR(hmi_exception_realmode)
Calling into the OPD instead of the actual code.
Fixes: 2337d20728 ("powerpc/64: CONFIG_RELOCATABLE support for hmi interrupts")
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Use DOTSYM() rather than #ifdef]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Convert string compares of DT node names to use of_node_name_eq helper
instead. This removes direct access to the node name pointer.
A couple of open coded iterating thru the child node names are converted
to use for_each_child_of_node() instead.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In preparation to remove the node name pointer from struct
device_node, convert printf users to use the %pOFn format specifier.
pmem.c was recently added and missed the initial conversion.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This comment talks about PTEs being 64-bits and PMD/PGD being 32-bits,
but that hasn't been true since 2005 when David Gibson implemented
4-level page tables in the commit titled "Four level pagetables for
ppc64".
Remove it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In update_lmb_associativity_index() we lookup dr_node using
of_find_node_by_path() which takes a reference for us. In the
non-error case we forget to drop the reference. Note that
find_aa_index() does modify properties of the node, but doesn't need
an extra reference held once it's returned.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
mpc8641_hpcn was updated to 4-cell interrupt specifiers, but
PCI interrupt-map was not updated. It was also missing #interrupt-cells
on the outer PCI buses.
p1020rdb-pc was updated to 4-cell interrupt specifiers, but
the ethernet-phy nodes weren't updated.
mpc832x_rdb had an invalid "interrupts = <0>" on the ethernet-phy nodes.
Besides being the wrong number of cells, 0 is not a valid IPIC interrupt
according to ipic.c. Presumably it was meant to indicate that these
PHYs are not connected to an interrupt.
Signed-off-by: Scott Wood <oss@buserror.net>
The driver retains compatibility with old device trees, but we don't
want the old nodes lying around to be copied, or used as a reference
(some of the mux options are incorrect), or even just being clutter.
Signed-off-by: Scott Wood <oss@buserror.net>
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
[scottwood: removed sysclk node added by Andy]
Signed-off-by: Scott Wood <oss@buserror.net>
When the watchdog timer is set in interrupt mode, it causes a
machine check when it times out. The purpose of this mode is to
ease debugging, not to crash the kernel and reboot the machine.
This patch implements a special handling for that, in order to not
crash the kernel if the watchdog times out while in interrupt or
within the idle task.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[scottwood: added missing #include]
Signed-off-by: Scott Wood <oss@buserror.net>
Fix a spelling mistake in a register description.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Scott Wood <oss@buserror.net>
swiotlb will only bounce buffer when the effective dma address for the
device is smaller than the actual DMA range. Instead of flipping between
the swiotlb and nommu ops for FSL SOCs that have the second outbound
window just don't set the bus dma_mask in this case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Scott Wood <oss@buserror.net>
The Kconfig lexer supports special characters such as '.' and '/' in
the parameter context. In my understanding, the reason is just to
support bare file paths in the source statement.
I do not see a good reason to complicate Kconfig for the room of
ambiguity.
The majority of code already surrounds file paths with double quotes,
and it makes sense since file paths are constant string literals.
Make it treewide consistent now.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
This has 5 commits that fix page dirty tracking when running nested
HV KVM guests, from Suraj Jitindar Singh.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJcHGnCAAoJEJ2a6ncsY3GfaMQIAKP1KQ/SzE38gORRjdf4aUTf
8X6+B6bAjVPwu0OgR2xoU4hPT8vpViG8gIjlspDm/v1igRlokz5GeCEXXlttQwK6
5JFfqS+psCQ/Z/bPFo0uW7cOojeDeE3s1Vd3XXjMH79T6Mvpg54fYutvxd+qbjW6
gAl/jGK6xxo1XsaQfySeSSLA3b8ibI77mjnPBgvbSHbrxBAIjoAfqKTVSjrPwR2b
ZvHyCbaoX2uOGyWrw9O73CqCgsiXEOQvr8dLEjsT7a+brrJBO4mv20s6DzlpC1lS
YVHd8GAfk44h1fxsNXsj9eEUIcRMEB4fYYOd/u0TECdeyFFWz+8JjBhm6u0TRck=
=Zrya
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-next-4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-next
Second PPC KVM update for 4.21
This has 5 commits that fix page dirty tracking when running nested
HV KVM guests, from Suraj Jitindar Singh.
The patch is to make kvm_set_spte_hva() return int and caller can
check return value to determine flush tlb or not.
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a page fault happens in a GPU, the GPU signals the OS and the GPU
driver calls the fault handler which populated a page table; this allows
the GPU to complete an ATS request.
On the bare metal get_user_pages() is enough as it adds a pte to
the kernel page table but under KVM the partition scope tree does not get
updated so ATS will still fail.
This reads a byte from an effective address which causes HV storage
interrupt and KVM updates the partition scope tree.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
A broken device tree might contain more than 8 values and introduce hard
to debug memory corruption bug. This adds the boundary check.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In order to make ATS work and translate addresses for arbitrary
LPID and PID, we need to program an NPU with LPID and allow PID wildcard
matching with a specific MSR mask.
This implements a helper to assign a GPU to LPAR and program the NPU
with a wildcard for PID and a helper to do clean-up. The helper takes
MSR (only DR/HV/PR/SF bits are allowed) to program them into NPU2 for
ATS checkout requests support.
This exports pnv_npu2_unmap_lpar_dev() as following patches will use it
from the VFIO driver.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
At the moment the powernv platform registers an IOMMU group for each
PE. There is an exception though: an NVLink bridge which is attached
to the corresponding GPU's IOMMU group making it a master.
Now we have POWER9 systems with GPUs connected to each other directly
bypassing PCI. At the moment we do not control state of these links so
we have to put such interconnected GPUs to one IOMMU group which means
that the old scheme with one GPU as a master won't work - there will
be up to 3 GPUs in such group.
This introduces a npu_comp struct which represents a compound IOMMU
group made of multiple PEs - PCI PEs (for GPUs) and NPU PEs (for
NVLink bridges). This converts the existing NVLink1 code to use the
new scheme. >From now on, each PE must have a valid
iommu_table_group_ops which will either be called directly (for a
single PE group) or indirectly from a compound group handlers.
This moves IOMMU group registration for NVLink-connected GPUs to
npu-dma.c. For POWER8, this stores a new compound group pointer in the
PE (so a GPU is still a master); for POWER9 the new group pointer is
stored in an NPU (which is allocated per a PCI host controller).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[mpe: Initialise npdev to NULL in pnv_try_setup_npu_table_group()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
At the moment NPU IOMMU is manipulated directly from the IODA2 PCI
PE code; PCI PE acts as a master to NPU PE. Soon we will have compound
IOMMU groups with several PEs from several different PHB (such as
interconnected GPUs and NPUs) so there will be no single master but
a one big IOMMU group.
This makes a first step and converts an NPU PE with a set of extern
function to a table group.
This should cause no behavioral change. Note that
pnv_npu_release_ownership() has never been implemented.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Normal PCI PEs have 2 TVEs, one per a DMA window; however NPU PE has only
one which points to one of two tables of the corresponding PCI PE.
So whenever a new DMA window is programmed to PEs, the NPU PE needs to
release old table in order to use the new one.
Commit d41ce7b1bc ("powerpc/powernv/npu: Do not try invalidating 32bit
table when 64bit table is enabled") did just that but in pci-ioda.c
while it actually belongs to npu-dma.c.
This moves the single TVE handling to npu-dma.c. This does not implement
restoring though as it is highly unlikely that we can set the table to
PCI PE and cannot to NPU PE and if that fails, we could only set 32bit
table to NPU PE and this configuration is not really supported or wanted.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The iommu_table pointer stored in iommu_table_group may get stale
by accident, this adds referencing and removes a redundant comment
about this.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Registering new IOMMU groups and adding devices to them are separated in
code and the latter is dug in the DMA setup code which it does not
really belong to.
This moved IOMMU groups setup to a separate helper which registers a group
and adds devices as before. This does not make a difference as IOMMU
groups are not used anyway; the only dependency here is that
iommu_add_device() requires a valid pointer to an iommu_table
(set by set_iommu_table_base()).
To keep the old behaviour, this does not add new IOMMU groups for PEs
with no DMA weight and also skips NVLink bridges which do not have
pci_controller_ops::setup_bridge (the normal way of adding PEs).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The powernv platform registers IOMMU groups and adds devices to them
from the pci_controller_ops::setup_bridge() hook except one case when
virtual functions (SRIOV VFs) are added from a bus notifier.
The pseries platform registers IOMMU groups from
the pci_controller_ops::dma_bus_setup() hook and adds devices from
the pci_controller_ops::dma_dev_setup() hook. The very same bus notifier
used for powernv does not add devices for pseries though as
__of_scan_bus() adds devices first, then it does the bus/dev DMA setup.
Both platforms use iommu_add_device() which takes a device and expects
it to have a valid IOMMU table struct with an iommu_table_group pointer
which in turn points the iommu_group struct (which represents
an IOMMU group). Although the helper seems easy to use, it relies on
some pre-existing device configuration and associated data structures
which it does not really need.
This simplifies iommu_add_device() to take the table_group pointer
directly. Pseries already has a table_group pointer handy and the bus
notified is not used anyway. For powernv, this copies the existing bus
notifier, makes it work for powernv only which means an easy way of
getting to the table_group pointer. This was tested on VFs but should
also support physical PCI hotplug.
Since iommu_add_device() receives the table_group pointer directly,
pseries does not do TCE cache invalidation (the hypervisor does) nor
allow multiple groups per a VFIO container (in other words sharing
an IOMMU table between partitionable endpoints), this removes
iommu_table_group_link from pseries.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The pci_dma_bus_setup_pSeries and pci_dma_dev_setup_pSeries hooks are
registered for the pseries platform which does not have FW_FEATURE_LPAR;
these would be pre-powernv platforms which we never supported PCI pass
through for anyway so remove it.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We already changed NPU API for GPUs to not to call OPAL and the remaining
bit is initializing NPU structures.
This searches for POWER9 NVLinks attached to any device on a PHB and
initializes an NPU structure if any found.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We might have memory@ nodes with "linux,usable-memory" set to zero
(for example, to replicate powernv's behaviour for GPU coherent memory)
which means that the memory needs an extra initialization but since
it can be used afterwards, the pseries platform will try mapping it
for DMA so the DMA window needs to cover those memory regions too;
if the window cannot cover new memory regions, the memory onlining fails.
This walks through the memory nodes to find the highest RAM address to
let a huge DMA window cover that too in case this memory gets onlined
later.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When introduced, the NPU context init/destroy helpers called OPAL which
enabled/disabled PID (a userspace memory context ID) filtering in an NPU
per a GPU; this was a requirement for P9 DD1.0. However newer chip
revision added a PID wildcard support so there is no more need to
call OPAL every time a new context is initialized. Also, since the PID
wildcard support was added, skiboot does not clear wildcard entries
in the NPU so these remain in the hardware till the system reboot.
This moves LPID and wildcard programming to the PE setup code which
executes once during the booting process so NPU2 context init/destroy
won't need to do additional configuration.
This replaces the check for FW_FEATURE_OPAL with a check for npu!=NULL as
this is the way to tell if the NPU support is present and configured.
This moves pnv_npu2_init() declaration as pseries should be able to use it.
This keeps pnv_npu2_map_lpar() in powernv as pseries is not allowed to
call that. This exports pnv_npu2_map_lpar_dev() as following patches
will use it from the VFIO driver.
While at it, replace redundant list_for_each_entry_safe() with
a simpler list_for_each_entry().
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The powernv PCI code stores NPU data in the pnv_phb struct. The latter
is referenced by pci_controller::private_data. We are going to have NPU2
support in the pseries platform as well but it does not store any
private_data in in the pci_controller struct; and even if it did,
it would be a different data structure.
This makes npu a pointer and stores it one level higher in
the pci_controller struct.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This new memory does not have page structs as it is not plugged to
the host so gup() will fail anyway.
This adds 2 helpers:
- mm_iommu_newdev() to preregister the "memory device" memory so
the rest of API can still be used;
- mm_iommu_is_devmem() to know if the physical address is one of thise
new regions which we must avoid unpinning of.
This adds @mm to tce_page_is_contained() and iommu_tce_xchg() to test
if the memory is device memory to avoid pfn_to_page().
This adds a check for device memory in mm_iommu_ua_mark_dirty_rm() which
does delayed pages dirtying.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Normally mm_iommu_get() should add a reference and mm_iommu_put() should
remove it. However historically mm_iommu_find() does the referencing and
mm_iommu_get() is doing allocation and referencing.
We are going to add another helper to preregister device memory so
instead of having mm_iommu_new() (which pre-registers the normal memory
and references the region), we need separate helpers for pre-registering
and referencing.
This renames:
- mm_iommu_get to mm_iommu_new;
- mm_iommu_find to mm_iommu_get.
This changes mm_iommu_get() to reference the region so the name now
reflects what it does.
This removes the check for exact match from mm_iommu_new() as we want it
to fail on existing regions; mm_iommu_get() should be used instead.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The skiboot firmware has a hot reset handler which fences the NVIDIA V100
GPU RAM on Witherspoons and makes accesses no-op instead of throwing HMIs:
https://github.com/open-power/skiboot/commit/fca2b2b839a67
Now we are going to pass V100 via VFIO which most certainly involves
KVM guests which are often terminated without getting a chance to offline
GPU RAM so we end up with a running machine with misconfigured memory.
Accessing this memory produces hardware management interrupts (HMI)
which bring the host down.
To suppress HMIs, this wires up this hot reset hook to vfio_pci_disable()
via pci_disable_device() which switches NPU2 to a safe mode and prevents
HMIs.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Alistair Popple <alistair@popple.id.au>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On the 8xx, no-execute is set via PPP bits in the PTE. Therefore
a no-exec fault generates DSISR_PROTFAULT error bits,
not DSISR_NOEXEC_OR_G.
This patch adds DSISR_PROTFAULT in the test mask.
Fixes: d3ca587404 ("powerpc/mm: Fix reporting of kernel execute faults")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
System call table generation script must be run to gener-
ate unistd_32/64.h and syscall_table_32/64/c32/spu.h files.
This patch will have changes which will invokes the script.
This patch will generate unistd_32/64.h and syscall_table-
_32/64/c32/spu.h files by the syscall table generation
script invoked by parisc/Makefile and the generated files
against the removed files must be identical.
The generated uapi header file will be included in uapi/-
asm/unistd.h and generated system call table header file
will be included by kernel/systbl.S file.
Signed-off-by: Firoz Khan <firoz.khan@linaro.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The system call tables are in different format in all
architecture and it will be difficult to manually add or
modify the system calls in the respective files. To make
it easy by keeping a script and which will generate the
uapi header and syscall table file. This change will also
help to unify the implementation across all architectures.
The system call table generation script is added in
syscalls directory which contain the script to generate
both uapi header file and system call table files.
The syscall.tbl file will be the input for the scripts.
syscall.tbl contains the list of available system calls
along with system call number and corresponding entry point.
Add a new system call in this architecture will be possible
by adding new entry in the syscall.tbl file.
Adding a new table entry consisting of:
- System call number.
- ABI.
- System call name.
- Entry point name.
- Compat entry name, if required.
syscallhdr.sh and syscalltbl.sh will generate uapi header-
unistd_32/64.h and syscall_table_32/64/c32/spu.h files
respectively. File syscall_table_32/64/c32/spu.h is incl-
uded by syscall.S - the real system call table. Both *.sh
files will parse the content syscall.tbl to generate the
header and table files.
ARM, s390 and x86 architecuture does have similar support.
I leverage their implementation to come up with a generic
solution.
Signed-off-by: Firoz Khan <firoz.khan@linaro.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
PowerPC uses a syscall table with native and compat calls
interleaved, which is a slightly simpler way to define two
matching tables.
As we move to having the tables generated, that advantage
is no longer important, but the interleaved table gets in
the way of using the same scripts as on the other archit-
ectures.
Split out a new compat_sys_call_table symbol that contains
all the compat calls, and leave the main table for the nat-
ive calls, to more closely match the method we use every-
where else.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Firoz Khan <firoz.khan@linaro.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move the macro definition for compat_sys_sigsuspend from
asm/systbl.h to the file which it is getting included.
One of the patch in this patch series is generating uapi
header and syscall table files. In order to come up with
a common implimentation across all architecture, we need
to do this change.
This change will simplify the implementation of system
call table generation script and help to come up a common
implementation across all architecture.
Signed-off-by: Firoz Khan <firoz.khan@linaro.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
NR_syscalls macro holds the number of system call exist
in powerpc architecture. We have to change the value of
NR_syscalls, if we add or delete a system call.
One of the patch in this patch series has a script which
will generate a uapi header based on syscall.tbl file.
The syscall.tbl file contains the number of system call
information. So we have two option to update NR_syscalls
value.
1. Update NR_syscalls in asm/unistd.h manually by count-
ing the no.of system calls. No need to update NR_sys-
calls until we either add a new system call or delete
existing system call.
2. We can keep this feature in above mentioned script,
that will count the number of syscalls and keep it in
a generated file. In this case we don't need to expli-
citly update NR_syscalls in asm/unistd.h file.
The 2nd option will be the recommended one. For that, I
added the __NR_syscalls macro in uapi/asm/unistd.h along
with NR_syscalls asm/unistd.h. The macro __NR_syscalls
also added for making the name convention same across all
architecture. While __NR_syscalls isn't strictly part of
the uapi, having it as part of the generated header to
simplifies the implementation. We also need to enclose
this macro with #ifdef __KERNEL__ to avoid side effects.
Signed-off-by: Firoz Khan <firoz.khan@linaro.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Protection key tracking information is not copied over to the
mm_struct of the child during fork(). This can cause the child to
erroneously allocate keys that were already allocated. Any allocated
execute-only key is lost aswell.
Add code; called by dup_mmap(), to copy the pkey state from parent to
child explicitly.
This problem was originally found by Dave Hansen on x86, which turns
out to be a problem on powerpc aswell.
Fixes: cf43d3b264 ("powerpc: Enable pkey subsystem")
Cc: stable@vger.kernel.org # v4.16+
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There is a TM Bad Thing bug that can be caused when you return from a
signal context in a suspended transaction but with ucontext MSR[TS] unset.
This forces regs->msr[TS] to be set at syscall entrance (since the CPU
state is transactional). It also calls treclaim() to flush the transaction
state, which is done based on the live (mfmsr) MSR state.
Since user context MSR[TS] is not set, then restore_tm_sigcontexts() is not
called, thus, not executing recheckpoint, keeping the CPU state as not
transactional. When calling rfid, SRR1 will have MSR[TS] set, but the CPU
state is non transactional, causing the TM Bad Thing with the following
stack:
[ 33.862316] Bad kernel stack pointer 3fffd9dce3e0 at c00000000000c47c
cpu 0x8: Vector: 700 (Program Check) at [c00000003ff7fd40]
pc: c00000000000c47c: fast_exception_return+0xac/0xb4
lr: 00003fff865f442c
sp: 3fffd9dce3e0
msr: 8000000102a03031
current = 0xc00000041f68b700
paca = 0xc00000000fb84800 softe: 0 irq_happened: 0x01
pid = 1721, comm = tm-signal-sigre
Linux version 4.9.0-3-powerpc64le (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u2 (2017-06-26)
WARNING: exception is not recoverable, can't continue
The same problem happens on 32-bits signal handler, and the fix is very
similar, if tm_recheckpoint() is not executed, then regs->msr[TS] should be
zeroed.
This patch also fixes a sparse warning related to lack of indentation when
CONFIG_PPC_TRANSACTIONAL_MEM is set.
Fixes: 2b0a576d15 ("powerpc: Add new transactional memory state to the signal context")
CC: Stable <stable@vger.kernel.org> # 3.10+
Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Michal Suchánek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Usually a TM Bad Thing exception is raised due to three different problems.
a) touching SPRs in an active transaction; b) using TM instruction with the
facility disabled and c) setting a wrong MSR/SRR1 at RFID.
The two initial cases are easy to identify by looking at the instructions.
The latter case is harder, because the MSR is masked after RFID, so, it is
very useful to look at the previous MSR (SRR1) before RFID as also the
current and masked MSR.
Since MSR is saved at paca just before RFID, this patch prints it if a TM
Bad thing happen, helping to understand what is the invalid TM transition
that is causing the exception.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As other exit points, move SRR1 (MSR) into paca->tm_scratch, so, if
there is a TM Bad Thing in RFID, it is easy to understand what was the
SRR1 value being used.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On a signal handler return, the user could set a context with MSR[TS] bits
set, and these bits would be copied to task regs->msr.
At restore_tm_sigcontexts(), after current task regs->msr[TS] bits are set,
several __get_user() are called and then a recheckpoint is executed.
This is a problem since a page fault (in kernel space) could happen when
calling __get_user(). If it happens, the process MSR[TS] bits were
already set, but recheckpoint was not executed, and SPRs are still invalid.
The page fault can cause the current process to be de-scheduled, with
MSR[TS] active and without tm_recheckpoint() being called. More
importantly, without TEXASR[FS] bit set also.
Since TEXASR might not have the FS bit set, and when the process is
scheduled back, it will try to reclaim, which will be aborted because of
the CPU is not in the suspended state, and, then, recheckpoint. This
recheckpoint will restore thread->texasr into TEXASR SPR, which might be
zero, hitting a BUG_ON().
kernel BUG at /build/linux-sf3Co9/linux-4.9.30/arch/powerpc/kernel/tm.S:434!
cpu 0xb: Vector: 700 (Program Check) at [c00000041f1576d0]
pc: c000000000054550: restore_gprs+0xb0/0x180
lr: 0000000000000000
sp: c00000041f157950
msr: 8000000100021033
current = 0xc00000041f143000
paca = 0xc00000000fb86300 softe: 0 irq_happened: 0x01
pid = 1021, comm = kworker/11:1
kernel BUG at /build/linux-sf3Co9/linux-4.9.30/arch/powerpc/kernel/tm.S:434!
Linux version 4.9.0-3-powerpc64le (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u2 (2017-06-26)
enter ? for help
[c00000041f157b30] c00000000001bc3c tm_recheckpoint.part.11+0x6c/0xa0
[c00000041f157b70] c00000000001d184 __switch_to+0x1e4/0x4c0
[c00000041f157bd0] c00000000082eeb8 __schedule+0x2f8/0x990
[c00000041f157cb0] c00000000082f598 schedule+0x48/0xc0
[c00000041f157ce0] c0000000000f0d28 worker_thread+0x148/0x610
[c00000041f157d80] c0000000000f96b0 kthread+0x120/0x140
[c00000041f157e30] c00000000000c0e0 ret_from_kernel_thread+0x5c/0x7c
This patch simply delays the MSR[TS] set, so, if there is any page fault in
the __get_user() section, it does not have regs->msr[TS] set, since the TM
structures are still invalid, thus avoiding doing TM operations for
in-kernel exceptions and possible process reschedule.
With this patch, the MSR[TS] will only be set just before recheckpointing
and setting TEXASR[FS] = 1, thus avoiding an interrupt with TM registers in
invalid state.
Other than that, if CONFIG_PREEMPT is set, there might be a preemption just
after setting MSR[TS] and before tm_recheckpoint(), thus, this block must
be atomic from a preemption perspective, thus, calling
preempt_disable/enable() on this code.
It is not possible to move tm_recheckpoint to happen earlier, because it is
required to get the checkpointed registers from userspace, with
__get_user(), thus, the only way to avoid this undesired behavior is
delaying the MSR[TS] set.
The 32-bits signal handler seems to be safe this current issue, but, it
might be exposed to the preemption issue, thus, disabling preemption in
this chunk of code.
Changes from v2:
* Run the critical section with preempt_disable.
Fixes: 87b4e5393a ("powerpc/tm: Fix return of active 64bit signals")
Cc: stable@vger.kernel.org (v3.9+)
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The rc bits contained in ptes are used to track whether a page has been
accessed and whether it is dirty. The accessed bit is used to age a page
and the dirty bit to track whether a page is dirty or not.
Now that we support nested guests there are three ptes which track the
state of the same page:
- The partition-scoped page table in the L1 guest, mapping L2->L1 address
- The partition-scoped page table in the host for the L1 guest, mapping
L1->L0 address
- The shadow partition-scoped page table for the nested guest in the host,
mapping L2->L0 address
The idea is to attempt to keep the rc state of these three ptes in sync,
both when setting and when clearing rc bits.
When setting the bits we achieve consistency by:
- Initially setting the bits in the shadow page table as the 'and' of the
other two.
- When updating in software the rc bits in the shadow page table we
ensure the state is consistent with the other two locations first, and
update these before reflecting the change into the shadow page table.
i.e. only set the bits in the L2->L0 pte if also set in both the
L2->L1 and the L1->L0 pte.
When clearing the bits we achieve consistency by:
- The rc bits in the shadow page table are only cleared when discarding
a pte, and we don't need to record this as if either bit is set then
it must also be set in the pte mapping L1->L0.
- When L1 clears an rc bit in the L2->L1 mapping it __should__ issue a
tlbie instruction
- This means we will discard the pte from the shadow page table
meaning the mapping will have to be setup again.
- When setup the pte again in the shadow page table we will ensure
consistency with the L2->L1 pte.
- When the host clears an rc bit in the L1->L0 mapping we need to also
clear the bit in any ptes in the shadow page table which map the same
gfn so we will be notified if a nested guest accesses the page.
This case is what this patch specifically concerns.
- We can search the nest_rmap list for that given gfn and clear the
same bit from all corresponding ptes in shadow page tables.
- If a nested guest causes either of the rc bits to be set by software
in future then we will update the L1->L0 pte and maintain consistency.
With the process outlined above we aim to maintain consistency of the 3
pte locations where we track rc for a given guest page.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Introduce a function kvmhv_update_nest_rmap_rc_list() which for a given
nest_rmap list will traverse it, find the corresponding pte in the shadow
page tables, and if it still maps the same host page update the rc bits
accordingly.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The shadow page table contains ptes for translations from nested guest
address to host address. Currently when creating these ptes we take the
rc bits from the pte for the L1 guest address to host address
translation. This is incorrect as we must also factor in the rc bits
from the pte for the nested guest address to L1 guest address
translation (as contained in the L1 guest partition table for the nested
guest).
By not calculating these bits correctly L1 may not have been correctly
notified when it needed to update its rc bits in the partition table it
maintains for its nested guest.
Modify the code so that the rc bits in the resultant pte for the L2->L0
translation are the 'and' of the rc bits in the L2->L1 pte and the L1->L0
pte, also accounting for whether this was a write access when setting
the dirty bit.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Nested rmap entries are used to store the translation from L1 gpa to L2
gpa when entries are inserted into the shadow (nested) page tables. This
rmap list is located by indexing the rmap array in the memslot by L1
gfn. When we come to search for these entries we only know the L1 page size
(which could be PAGE_SIZE, 2M or a 1G page) and so can only select a gfn
aligned to that size. This means that when we insert the entry, so we can
find it later, we need to align the gfn we use to select the rmap list
in which to insert the entry to L1 page size as well.
By not doing this we were missing nested rmap entries when modifying L1
ptes which were for a page also passed through to an L2 guest.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
We already hold the kvm->mmu_lock spin lock across updating the rc bits
in the pte for the L1 guest. Continue to hold the lock across updating
the rc bits in the pte for the nested guest as well to prevent
invalidations from occurring.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
For fadump to work successfully there should not be any holes in reserved
memory ranges where kernel has asked firmware to move the content of old
kernel memory in event of crash. Now that fadump uses CMA for reserved
area, this memory area is now not protected from hot-remove operations
unless it is cma allocated. Hence, fadump service can fail to re-register
after the hot-remove operation, if hot-removed memory belongs to fadump
reserved region. To avoid this make sure that memory from fadump reserved
area is not hot-removable if fadump is registered.
However, if user still wants to remove that memory, he can do so by
manually stopping fadump service before hot-remove operation.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
fadump fails to register when there are holes in reserved memory area.
This can happen if user has hot-removed a memory that falls in the
fadump reserved memory area. Throw a meaningful error message to the
user in such case.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
[mpe: is_reserved_memory_area_contiguous() returns bool, unsplit string]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
One of the primary issues with Firmware Assisted Dump (fadump) on Power
is that it needs a large amount of memory to be reserved. On large
systems with TeraBytes of memory, this reservation can be quite
significant.
In some cases, fadump fails if the memory reserved is insufficient, or
if the reserved memory was DLPAR hot-removed.
In the normal case, post reboot, the preserved memory is filtered to
extract only relevant areas of interest using the makedumpfile tool.
While the tool provides flexibility to determine what needs to be part
of the dump and what memory to filter out, all supported distributions
default this to "Capture only kernel data and nothing else".
We take advantage of this default and the Linux kernel's Contiguous
Memory Allocator (CMA) to fundamentally change the memory reservation
model for fadump.
Instead of setting aside a significant chunk of memory nobody can use,
this patch uses CMA instead, to reserve a significant chunk of memory
that the kernel is prevented from using (due to MIGRATE_CMA), but
applications are free to use it. With this fadump will still be able
to capture all of the kernel memory and most of the user space memory
except the user pages that were present in CMA region.
Essentially, on a P9 LPAR with 2 cores, 8GB RAM and current upstream:
[root@zzxx-yy10 ~]# free -m
total used free shared buff/cache available
Mem: 7557 193 6822 12 541 6725
Swap: 4095 0 4095
With this patch:
[root@zzxx-yy10 ~]# free -m
total used free shared buff/cache available
Mem: 8133 194 7464 12 475 7338
Swap: 4095 0 4095
Changes made here are completely transparent to how fadump has
traditionally worked.
Thanks to Aneesh Kumar and Anshuman Khandual for helping us understand
CMA and its usage.
TODO:
- Handle case where CMA reservation spans nodes.
Signed-off-by: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
opal_power_control_init() depends on opal message notifier to be
initialized, which is done in opal_init()->opal_message_init(). But both
these initialization are called through machine initcalls and it all
depends on in which order they being called. So far these are called in
correct order (may be we got lucky) and never saw any issue. But it is
clearer to control initialization order explicitly by moving
opal_power_control_init() into opal_init().
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The script "checkpatch.pl" pointed information out like the following.
WARNING: void function return statements are not generally useful
Thus remove such a statement in the affected functions.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Omit an extra message for a memory allocation failure in these
functions.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
A single character (line break) should be put into a sequence.
Thus use the corresponding function "seq_putc".
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Some data were printed into a sequence by four separate function calls.
Print the same data by two single function calls instead.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
CONFIG_EARLY_DEBUG_CPM requires IMMR area TLB to be pinned
otherwise it doesn't survive MMU_init, and the boot fails.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
CONFIG_PCI_MSI was made mandatory by commit a311e738b6
("powerpc/powernv: Make PCI non-optional") so the #ifdef
checks around CONFIG_PCI_MSI here can be removed entirely.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Fix a spelling mistake in a register description.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 14c63f17b1 ("perf: Drop sample rate when sampling is too
slow") introduced a way to throttle PMU interrupts if we're spending
too much time just processing those. Wire up powerpc PMI handler to
use this infrastructure.
We have throttling of the *rate* of interrupts, but this adds
throttling based on the *time taken* to process the interrupts.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Lots of conflicts, by happily all cases of overlapping
changes, parallel adds, things of that nature.
Thanks to Stephen Rothwell, Saeed Mahameed, and others
for their guidance in these resolutions.
Signed-off-by: David S. Miller <davem@davemloft.net>
The main new feature this time is support in HV nested KVM for passing
a device that is emulated by a level 0 hypervisor and presented to
level 1 as a PCI device through to a level 2 guest using VFIO.
Apart from that there are improvements for migration of radix guests
under HV KVM and some other fixes and cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJcGFzEAAoJEJ2a6ncsY3GfKjoH/Azcf8QIO5ftyHrjazFZOSUh
5Lr24HZTYHheowp6obzuZWRAIyckHmflRmOkv8RVGuA8+Sp+m5pBxN3WTVPOwDUh
WanOWVGJsuhl6qATmkm7xIxmYhQEyLxVNbnWva7WXuZ92rgGCNfHtByHWAx/7vTe
q5Shr4fLIQ8HRzor8Xqqph1I0hQNTE9VsaK1hW/PxI0gsO8qjDwOR8SDpT/aaJrS
Sir+lM0TwCbJREuObDxYAXn1OWy8rMYjlb9fEBv5tmPCQKiB9vJz4tV+ahR9eJ14
PEF57MoBOGwzQXo4geFLuo/Bu8fDygKsKQX1eYGcn6tRGA4pnTxzYl0+dHLBkOM=
=3WkD
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-next-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
PPC KVM update for 4.21 from Paul Mackerras
The main new feature this time is support in HV nested KVM for passing
a device that is emulated by a level 0 hypervisor and presented to
level 1 as a PCI device through to a level 2 guest using VFIO.
Apart from that there are improvements for migration of radix guests
under HV KVM and some other fixes and cleanups.
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE
for debugfs files.
Semantic patch information:
Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file()
imposes some significant overhead as compared to
DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe().
Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The current implementation of the OPAL_PCI_EEH_FREEZE_STATUS call in
skiboot's NPU driver does not touch the pci_error_type parameter so
it might have garbage but the powernv code analyzes it nevertheless.
This initializes pcierr and fstate to zero in all call sites.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
fixup_phb() is never used, this removes it.
pick_m64_pe() and reserve_m64_pe() are always defined for all powernv
PHBs: they are initialized by pnv_ioda_parse_m64_window() which is
called unconditionally from pnv_pci_init_ioda_phb() which initializes
all known PHB types on powernv so we can open code them.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Report branch predictor state flush as a mitigation for
Spectre variant 2.
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
At the moment PNV_IODA_PE_DEV is only used for NPU PEs which are not
present on IODA1 machines (i.e. POWER7) so let's remove a piece of
dead code.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If the user choses not to use the mitigations, replace
the code sequence with nops.
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Switching from the guest to host is another place
where the speculative accesses can be exploited.
Flush the branch predictor when entering KVM.
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The macro and few headers are not used so remove them.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In order to protect against speculation attacks on
indirect branches, the branch predictor is flushed at
kernel entry to protect for the following situations:
- userspace process attacking another userspace process
- userspace process attacking the kernel
Basically when the privillege level change (i.e.the kernel
is entered), the branch predictor state is flushed.
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The powernv platform maintains 2 TCE tables for VFIO - a hardware TCE
table and a table with userspace addresses; the latter is used for
marking pages dirty when corresponging TCEs are unmapped from
the hardware table.
a68bd1267b ("powerpc/powernv/ioda: Allocate indirect TCE levels
on demand") enabled on-demand allocation of the hardware table,
however it missed the other table so it has still been fully allocated
at the boot time. This fixes the issue by allocating a single level,
just like we do for the hardware table.
Fixes: a68bd1267b ("powerpc/powernv/ioda: Allocate indirect TCE levels on demand")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In order to protect against speculation attacks on
indirect branches, the branch predictor is flushed at
kernel entry to protect for the following situations:
- userspace process attacking another userspace process
- userspace process attacking the kernel
Basically when the privillege level change (i.e. the
kernel is entered), the branch predictor state is flushed.
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When the command line argument is present, the Spectre variant 2
mitigations are disabled.
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In order to flush the branch predictor the guest kernel performs
writes to the BUCSR register which is hypervisor privilleged. However,
the branch predictor is flushed at each KVM entry, so the branch
predictor has been already flushed, so just return as soon as possible
to guest.
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
[mpe: Tweak comment formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently for CONFIG_PPC_FSL_BOOK3E the spectre_v2 file is incorrect:
$ cat /sys/devices/system/cpu/vulnerabilities/spectre_v2
"Mitigation: Software count cache flush"
Which is wrong. Fix it to report vulnerable for now.
Fixes: ee13cb249f ("powerpc/64s: Add support for software count cache flush")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The BUCSR register can be used to invalidate the entries in the
branch prediction mechanisms.
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In order to protect against speculation attacks (Spectre
variant 2) on NXP PowerPC platforms, the branch predictor
should be flushed when the privillege level is changed.
This patch is adding the infrastructure to fixup at runtime
the code sections that are performing the branch predictor flush
depending on a boot arg parameter which is added later in a
separate patch.
Signed-off-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If the device tree doesn't reside in the memory which is declared
inside it, it has to be moved as well as this memory will not be
mapped by the kernel.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This reverts the remains of commit b9ef7d6b11 ("powerpc: Update
default configurations").
That commit was proceeded by a commit which added a config option to
control use of BOOTX for early debug, ie. PPC_EARLY_DEBUG_BOOTX, and
then the update of the defconfigs was intended to not change behaviour
by then enabling the new config option.
However enabling PPC_EARLY_DEBUG had other consequences, notably
causing us to register the udbg console at the end of udbg_early_init().
This means on a system which doesn't have anything that BOOTX can
use (most systems), we register the udbg console very early but the
bootx code just throws everything away, meaning early boot messages
are never printed to the console.
What we want to happen is for the udbg console to only be registered
later (from setup_arch()) once we've setup udbg_putc, and then all
early boot messages will be replayed.
Fixes: b9ef7d6b11 ("powerpc: Update default configurations")
Reported-by: Torsten Duwe <duwe@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
For this use case, completions and semaphores are equivalent,
but semaphores are an awkward interface that should generally
be avoided, so use the completion instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The bamboo dts has a bug: it uses a non-naturally aligned range
for PCI memory space. This isnt' supported by the code, thus
causing PCI to break on this system.
This is due to the fact that while the chip memory map has 1G
reserved for PCI memory, it's only 512M aligned. The code doesn't
know how to split that into 2 different PMMs and fails, so limit
the region to 512M.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a IRQ init routine for the Nemo board which inits and attatches
the i8259 found in the SB600, and a cascade routine to dispatch the
interrupts.
Signed-off-by: Darren Stevens <darren@stevens-zone.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add routines for Nemo specific devices to init at boot time, these
being board level power-off and SB600's rtc.
Also add a run time variable to prevent these being activated
if we boot on a reference board.
Signed-off-by: Darren Stevens <darren@stevens-zone.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a IRQ init routine for the Nemo board which inits and attatches
the i8259 found in the SB600, and a cascade routine to dispatch the
interrupts.
Signed-off-by: Darren Stevens <darren@stevens-zone.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The A-Eon Amigaone X1000's Nemo motherboard has an AMD SB600
connected to one of the PCI-e root ports on its PaSemi
Pwrficient 1628M SoC. Normally the SB600 southbridge would be
connected to a hidden PCI-e port on the system's northbridge,
and as a result doesn't fully comply with the PCI-e spec.
Add code to relax the PCI-e detection in both the root port
and the Linux kernel allowing on board devices to be detected.
Signed-off-by: Darren Stevens <darren@stevens-zone.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As several other arches including x86, this patch makes it explicit
that a bad page fault is a NULL pointer dereference when the fault
address is lower than PAGE_SIZE
In the mean time, this page makes all bad_page_fault() messages
shorter so that they remain on one single line. And it prefixes them
by "BUG: " so that they get easily grepped.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Avoid pr_cont()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Combine the SYSCALL_EMU and SYSCALL_TRACE handling so that we only
call tracehook_report_syscall_entry() in one place.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
[mpe: Flesh out change log, s/cached_flags/flags/, reflow comments]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Powerpc has somewhat odd usage where ZONE_DMA is used for all memory on
common 64-bit configfs, and ZONE_DMA32 is used for 31-bit schemes.
Move to a scheme closer to what other architectures use (and I dare to
say the intent of the system):
- ZONE_DMA: optionally for memory < 31-bit (64-bit embedded only)
- ZONE_NORMAL: everything addressable by the kernel
- ZONE_HIGHMEM: memory > 32-bit for 32-bit kernels
Also provide information on how ZONE_DMA is used by defining
ARCH_ZONE_DMA_BITS.
Contains various fixes from Benjamin Herrenschmidt.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The implemementation for the CONFIG_NOT_COHERENT_CACHE case doesn't share
any code with the one for systems with coherent caches. Split it off
and merge it with the helpers in dma-noncoherent.c that have no other
callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The unmap methods need to transfer memory ownership back from the
device to the cpu by identical means as dma_sync_*_to_cpu. I'm not
sure powerpc needs to do any work in this transfer direction, but
given that it does invalidate the caches in dma_sync_*_to_cpu already
we should make sure we also do so on unmapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[mpe: s/dir/direction in dma_nommu_unmap_page()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
AMIGAONE selects NOT_COHERENT_CACHE, so we better allow it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch fixes early DEBUG messages in prom.c:
- Use %px instead of %p to see the addresses
- Cast memblock_phys_mem_size() with (unsigned long long) to
avoid build failure when phys_addr_t is not 64 bits.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When building for ppc32 with clang these flags are unsupported:
-ffixed-r2 and -mmultiple
llvm's lib/Target/PowerPC/PPCRegisterInfo.cpp marks r2 as reserved on
when building for SVR4ABI and !ppc64:
// The SVR4 ABI reserves r2 and r13
if (Subtarget.isSVR4ABI()) {
// We only reserve r2 if we need to use the TOC pointer. If we have no
// explicit uses of the TOC pointer (meaning we're a leaf function with
// no constant-pool loads, etc.) and we have no potential uses inside an
// inline asm block, then we can treat r2 has an ordinary callee-saved
// register.
const PPCFunctionInfo *FuncInfo = MF.getInfo<PPCFunctionInfo>();
if (!TM.isPPC64() || FuncInfo->usesTOCBasePtr() || MF.hasInlineAsm())
markSuperRegs(Reserved, PPC::R2); // System-reserved register
markSuperRegs(Reserved, PPC::R13); // Small Data Area pointer register
}
This means we can safely omit -ffixed-r2 when building for 32-bit
targets.
The -mmultiple/-mno-multiple flags are not supported by clang, so
platforms that might support multiple miss out on using multiple word
instructions.
We wrap these flags in cc-option so that when Clang gains support the
kernel will be able use these flags.
Clang 8 can then build a ppc44x_defconfig which boots in Qemu:
make CC=clang-8 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- ppc44x_defconfig
./scripts/config -e CONFIG_DEVTMPFS -d DEVTMPFS_MOUNT
make CC=clang-8 ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu-
qemu-system-ppc -M bamboo \
-kernel arch/powerpc/boot/zImage \
-dtb arch/powerpc/boot/dts/bamboo.dtb \
-initrd ~/ppc32-440-rootfs.cpio \
-nographic -serial stdio -monitor pty -append "console=ttyS0"
Link: https://github.com/ClangBuiltLinux/linux/issues/261
Link: https://bugs.llvm.org/show_bug.cgi?id=39556
Link: https://bugs.llvm.org/show_bug.cgi?id=39555
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Remove PM_L2_ST_MISS and PM_L2_ST from HW cache event array since
these are bus events. And these needs to be programmed in groups.
Hence remove them.
Fixes: f1fb60bfde ('powerpc/perf: Export Power9 generic and cache events to sysfs')
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In previous generation processors, both bus events and direct
events of performance monitoring unit can be individually
programmabled and monitored in PMCs.
But in Power9, L2/L3 bus events are always available as a
"bank" of 4 events. To obtain the counts for any of the
l2/l3 bus events in a given bank, the user will have to
program PMC4 with corresponding l2/l3 bus event for that
bank.
Patch enforce two contraints incase of L2/L3 bus events.
1)Any L2/L3 event when programmed is also expected to program corresponding
PMC4 event from that group.
2)PMC4 event should always been programmed first due to group constraint
logic limitation
For ex. consider these L3 bus events
PM_L3_PF_ON_CHIP_MEM (0x460A0),
PM_L3_PF_MISS_L3 (0x160A0),
PM_L3_CO_MEM (0x260A0),
PM_L3_PF_ON_CHIP_CACHE (0x360A0),
1) This is an INVALID group for L3 Bus event monitoring,
since it is missing PMC4 event.
perf stat -e "{r160A0,r260A0,r360A0}" < >
And this is a VALID group for L3 Bus events:
perf stat -e "{r460A0,r160A0,r260A0,r360A0}" < >
2) This is an INVALID group for L3 Bus event monitoring,
since it is missing PMC4 event.
perf stat -e "{r260A0,r360A0}" < >
And this is a VALID group for L3 Bus events:
perf stat -e "{r460A0,r260A0,r360A0}" < >
3) This is an INVALID group for L3 Bus event monitoring,
since it is missing PMC4 event.
perf stat -e "{r360A0}" < >
And this is a VALID group for L3 Bus events:
perf stat -e "{r460A0,r360A0}" < >
Patch here implements group constraint logic suggested by Michael Ellerman.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Raw event code has couple of fields "unit" and "cache" in it, to capture
the "unit" to monitor for a given pmcxsel and cache reload qualifier to
program in MMCR1.
isa207_get_constraint() refers "unit" field to update the MMCRC (L2/L3)
Event bus control fields with "cache" bits of the raw event code.
These are power8 specific and not supported by PowerISA v3.0 pmu. So wrap
the checks to be power8 specific. Also, "cache" bit field is referred to
update MMCR1[16:17] and this check can be power8 specific.
Fixes: 7ffd948fae ('powerpc/perf: factor out power8 pmu functions')
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Update the raw event code comment in power9-pmu.c with respect to
"cache" bits, since power9 MMCRC does not support these.
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On each sample, Sample Instruction Event Register (SIER) content
is saved in pt_regs. SIER does not have a entry as-is in the pt_regs
but instead, SIER content is saved in the "dar" register of pt_regs.
Patch adds another entry to the perf_regs structure to include the "SIER"
printing which internally maps to the "dar" of pt_regs.
It also check for the SIER availability in the platform and present
value accordingly
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
MMCRA[34:36] and MMCRA[38:44] expose the thresholding counter value.
Thresholding counter can be used to count latency cycles such as
load miss to reload. But threshold counter value is not relevant
when the sampled instruction type is unknown or reserved. Patch to
fix the thresholding counter value to zero when sampled instruction
type is unknown or reserved.
Fixes: 170a315f41c6('powerpc/perf: Support to export MMCRA[TEC*] field to userspace')
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In commit 2865d08dd9 ("powerpc/mm: Move the DSISR_PROTFAULT sanity
check") we moved the protection fault access check before the vma
lookup. That means we hit that WARN_ON when user space accesses a
kernel address. Before that commit this was handled by find_vma() not
finding vma for the kernel address and considering that access as bad
area access.
Avoid the confusing WARN_ON and convert that to a ratelimited printk.
With the patch we now get:
for load:
a.out[5997]: User access of kernel address (c00000000000dea0) - exploit attempt? (uid: 1000)
a.out[5997]: segfault (11) at c00000000000dea0 nip 1317c0798 lr 7fff80d6441c code 1 in a.out[1317c0000+10000]
a.out[5997]: code: 60000000 60420000 3c4c0002 38427790 4bffff20 3c4c0002 38427784 fbe1fff8
a.out[5997]: code: f821ffc1 7c3f0b78 60000000 e9228030 <89290000> 993f002f 60000000 383f0040
for exec:
a.out[6067]: User access of kernel address (c00000000000dea0) - exploit attempt? (uid: 1000)
a.out[6067]: segfault (11) at c00000000000dea0 nip c00000000000dea0 lr 129d507b0 code 1
a.out[6067]: Bad NIP, not dumping instructions.
Fixes: 2865d08dd9 ("powerpc/mm: Move the DSISR_PROTFAULT sanity check")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Tested-by: Breno Leitao <leitao@debian.org>
[mpe: Don't split printk() string across lines]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The 603 doesn't have a HASH table, TLB misses are handled by
software. It is then possible to generate page fault when
_PAGE_EXEC is not set like in nohash/32.
There is one "reserved" PTE bit available, this patch uses
it for _PAGE_EXEC.
In order to support it, set_pte_filter() and
set_access_flags_filter() are made common, and the handling
is made dependent on MMU_FTR_HPTE_TABLE
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Define slice_init_new_context_exec() at all time to avoid
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
With the following piece of code, the following compilation warning
is encountered:
if (_IOC_DIR(ioc) != _IOC_NONE) {
int verify = _IOC_DIR(ioc) & _IOC_READ ? VERIFY_WRITE : VERIFY_READ;
if (!access_ok(verify, ioarg, _IOC_SIZE(ioc))) {
drivers/platform/test/dev.c: In function 'my_ioctl':
drivers/platform/test/dev.c:219:7: warning: unused variable 'verify' [-Wunused-variable]
int verify = _IOC_DIR(ioc) & _IOC_READ ? VERIFY_WRITE : VERIFY_READ;
This patch fixes it by referencing 'type' in the macro allthough
doing nothing with it.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
commit f21f49ea63 ("[POWERPC] Remove the dregs of APUS support from
arch/powerpc") removed CONFIG_APUS, but forgot to remove the logic
which adapts tophys() and tovirt() for it.
This patch removes the last stale pieces.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch fixes the loop in p_block_mapped() and v_block_mapped()
to scan the entire bat_addrs[] array.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Depending on the CONFIG selected, many of the MMU features are
not possible. Lets only get the possible ones in MMU_FTRS_POSSIBLE.
This allows gcc to get rid at compile time of code related to
not possible features.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use patch sites and associated helpers to manage TLB handlers
patching instead of hardcoding.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Instead of hardcoding the TLB handlers patching, use
the newly created modify_instruction_site() helper.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use patch_sites and the new modify_instruction_site() function
instead of hardcoding hash functions patching.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Instead of manually patching a blr at hash_page() entry in
MMU_init_hw(), this patch adds a features section in head_32.S
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use patch_site_addr() instead of hardcoding the
address calculation in machine_init()
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add two helpers to avoid hardcoding of instructions modifications.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Using patch_site_addr() helper, patch_instruction_site() and
patch_branch_site() can be simplified and inlined.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In file included from ./include/linux/hugetlb.h:445:0,
from arch/powerpc/kernel/setup-common.c:37:
./arch/powerpc/include/asm/hugetlb.h: In function ‘huge_ptep_clear_flush’:
./arch/powerpc/include/asm/hugetlb.h:154:8: error: variable ‘pte’ set but not used [-Werror=unused-but-set-variable]
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The code:
ifdef CONFIG_6xx
KBUILD_CFLAGS += -mcpu=powerpc
endif
was added in 2006 in commit f48b8296b3 ("[PATCH] powerpc32: Set cpu
explicitly in kernel compiles"). This change was acceptable since the
TARGET_CPU logic was 64-bit only.
Since commit 0e00a8c9fd ("powerpc: Allow CPU selection
also on PPC32") this logic is no longer acceptable after the TARGET_CPU
specific. It currently appends -mcpu=powerpc at the end of the command
line, after any TARGET_CPU specific:
gcc -Wp,-MD,init/.do_mounts.o.d ...
-mcpu=powerpc -mbig-endian -m32 ...
-mcpu=e300c2 ...
-mcpu=powerpc ...
../init/do_mounts.c
Fixes: 0e00a8c9fd ("powerpc: Allow CPU selection also on PPC32")
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
ipic_set_priority() has been unused since 2006 when the last usage was
removed in commit b9f0f1bb2b ("[POWERPC] Adapt ipic driver to new
host_ops interface, add set_irq_type to set IRQ sense").
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Merge our fixes branch again, this has a couple of build fixes and also
a change to do_syscall_trace_enter() that will conflict with a patch we
want to apply in next.
Use the new function to replace the open-coded iommu check.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Russell Currey <ruscur@russell.cc>
Cc: Sam Bobroff <sbobroff@linux.ibm.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Previously when a device was being emulated by an L1 guest for an L2
guest, that device couldn't then be passed through to an L3 guest. This
was because the L1 guest had no method for accessing L3 memory.
The hcall H_COPY_TOFROM_GUEST provides this access. Thus this setup for
passthrough can now be allowed.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
A guest cannot access quadrants 1 or 2 as this would result in an
exception. Thus introduce the hcall H_COPY_TOFROM_GUEST to be used by a
guest when it wants to perform an access to quadrants 1 or 2, for
example when it wants to access memory for one of its nested guests.
Also provide an implementation for the kvm-hv module.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Allow for a device which is being emulated at L0 (the host) for an L1
guest to be passed through to a nested (L2) guest.
The existing kvmppc_hv_emulate_mmio function can be used here. The main
challenge is that for a load the result must be stored into the L2 gpr,
not an L1 gpr as would normally be the case after going out to qemu to
complete the operation. This presents a challenge as at this point the
L2 gpr state has been written back into L1 memory.
To work around this we store the address in L1 memory of the L2 gpr
where the result of the load is to be stored and use the new io_gpr
value KVM_MMIO_REG_NESTED_GPR to indicate that this is a nested load for
which completion must be done when returning back into the kernel. Then
in kvmppc_complete_mmio_load() the resultant value is written into L1
memory at the location of the indicated L2 gpr.
Note that we don't currently let an L1 guest emulate a device for an L2
guest which is then passed through to an L3 guest.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The functions kvmppc_st and kvmppc_ld are used to access guest memory
from the host using a guest effective address. They do so by translating
through the process table to obtain a guest real address and then using
kvm_read_guest or kvm_write_guest to make the access with the guest real
address.
This method of access however only works for L1 guests and will give the
incorrect results for a nested guest.
We can however use the store_to_eaddr and load_from_eaddr kvmppc_ops to
perform the access for a nested guesti (and a L1 guest). So attempt this
method first and fall back to the old method if this fails and we aren't
running a nested guest.
At this stage there is no fall back method to perform the access for a
nested guest and this is left as a future improvement. For now we will
return to the nested guest and rely on the fact that a translation
should be faulted in before retrying the access.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The kvmppc_ops struct is used to store function pointers to kvm
implementation specific functions.
Introduce two new functions load_from_eaddr and store_to_eaddr to be
used to load from and store to a guest effective address respectively.
Also implement these for the kvm-hv module. If we are using the radix
mmu then we can call the functions to access quadrant 1 and 2.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The POWER9 radix mmu has the concept of quadrants. The quadrant number
is the two high bits of the effective address and determines the fully
qualified address to be used for the translation. The fully qualified
address consists of the effective lpid, the effective pid and the
effective address. This gives then 4 possible quadrants 0, 1, 2, and 3.
When accessing these quadrants the fully qualified address is obtained
as follows:
Quadrant | Hypervisor | Guest
--------------------------------------------------------------------------
| EA[0:1] = 0b00 | EA[0:1] = 0b00
0 | effLPID = 0 | effLPID = LPIDR
| effPID = PIDR | effPID = PIDR
--------------------------------------------------------------------------
| EA[0:1] = 0b01 |
1 | effLPID = LPIDR | Invalid Access
| effPID = PIDR |
--------------------------------------------------------------------------
| EA[0:1] = 0b10 |
2 | effLPID = LPIDR | Invalid Access
| effPID = 0 |
--------------------------------------------------------------------------
| EA[0:1] = 0b11 | EA[0:1] = 0b11
3 | effLPID = 0 | effLPID = LPIDR
| effPID = 0 | effPID = 0
--------------------------------------------------------------------------
In the Guest;
Quadrant 3 is normally used to address the operating system since this
uses effPID=0 and effLPID=LPIDR, meaning the PID register doesn't need to
be switched.
Quadrant 0 is normally used to address user space since the effLPID and
effPID are taken from the corresponding registers.
In the Host;
Quadrant 0 and 3 are used as above, however the effLPID is always 0 to
address the host.
Quadrants 1 and 2 can be used by the host to address guest memory using
a guest effective address. Since the effLPID comes from the LPID register,
the host loads the LPID of the guest it would like to access (and the
PID of the process) and can perform accesses to a guest effective
address.
This means quadrant 1 can be used to address the guest user space and
quadrant 2 can be used to address the guest operating system from the
hypervisor, using a guest effective address.
Access to the quadrants can cause a Hypervisor Data Storage Interrupt
(HDSI) due to being unable to perform partition scoped translation.
Previously this could only be generated from a guest and so the code
path expects us to take the KVM trampoline in the interrupt handler.
This is no longer the case so we modify the handler to call
bad_page_fault() to check if we were expecting this fault so we can
handle it gracefully and just return with an error code. In the hash mmu
case we still raise an unknown exception since quadrants aren't defined
for the hash mmu.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
There exists a function kvm_is_radix() which is used to determine if a
kvm instance is using the radix mmu. However this only applies to the
first level (L1) guest. Add a function kvmhv_vcpu_is_radix() which can
be used to determine if the current execution context of the vcpu is
radix, accounting for if the vcpu is running a nested guest.
Currently all nested guests must be radix but this may change in the
future.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The kvm capability KVM_CAP_SPAPR_TCE_VFIO is used to indicate the
availability of in kernel tce acceleration for vfio. However it is
currently the case that this is only available on a powernv machine,
not for a pseries machine.
Thus make this capability dependent on having the cpu feature
CPU_FTR_HVMODE.
[paulus@ozlabs.org - fixed compilation for Book E.]
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This adds code to flush the partition-scoped page tables for a radix
guest when dirty tracking is turned on or off for a memslot. Only the
guest real addresses covered by the memslot are flushed. The reason
for this is to get rid of any 2M PTEs in the partition-scoped page
tables that correspond to host transparent huge pages, so that page
dirtiness is tracked at a system page (4k or 64k) granularity rather
than a 2M granularity. The page tables are also flushed when turning
dirty tracking off so that the memslot's address space can be
repopulated with THPs if possible.
To do this, we add a new function kvmppc_radix_flush_memslot(). Since
this does what's needed for kvmppc_core_flush_memslot_hv() on a radix
guest, we now make kvmppc_core_flush_memslot_hv() call the new
kvmppc_radix_flush_memslot() rather than calling kvm_unmap_radix()
for each page in the memslot. This has the effect of fixing a bug in
that kvmppc_core_flush_memslot_hv() was previously calling
kvm_unmap_radix() without holding the kvm->mmu_lock spinlock, which
is required to be held.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This adds 'const' to the declarations for the struct kvm_memory_slot
pointer parameters of some functions, which will make it possible to
call those functions from kvmppc_core_commit_memory_region_hv()
in the next patch.
This also fixes some comments about locking.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
For radix guests, this makes KVM map guest memory as individual pages
when dirty page logging is enabled for the memslot corresponding to the
guest real address. Having a separate partition-scoped PTE for each
system page mapped to the guest means that we have a separate dirty
bit for each page, thus making the reported dirty bitmap more accurate.
Without this, if part of guest memory is backed by transparent huge
pages, the dirty status is reported at a 2MB granularity rather than
a 64kB (or 4kB) granularity for that part, causing userspace to have
to transmit more data when migrating the guest.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Currently, kvm_arch_commit_memory_region() gets called with a
parameter indicating what type of change is being made to the memslot,
but it doesn't pass it down to the platform-specific memslot commit
functions. This adds the `change' parameter to the lower-level
functions so that they can use it in future.
[paulus@ozlabs.org - fix book E also.]
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
One notable fix for our change to split pt_regs between user/kernel, we forgot
to update BPF to use the user-visible type which was an ABI break for BPF
programs.
A slightly ugly but minimal fix to do_syscall_trace_enter() so that we use
tracehook_report_syscall_entry() properly. We'll rework the code in next to
avoid the empty if body.
Seven commits fixing bugs in the new papr_scm (Storage Class Memory) driver.
The driver was finally able to be tested on the other hypervisor which exposed
several bugs. The fixes are all fairly minimal at least.
Fix a crash in our MSI code if an MSI-capable device is plugged into a non-MSI
capable PHB, only seen on older hardware (MPC8378).
Fix our legacy serial code to look for "stdout-path" since the device trees were
updated to use that instead of "linux,stdout-path".
A change to the COFF zImage code to fix booting old powermacs.
A couple of minor build fixes.
Thanks to:
Benjamin Herrenschmidt, Daniel Axtens, Dmitry V. Levin, Elvira Khabirova,
Oliver O'Halloran, Paul Mackerras, Radu Rendec, Rob Herring, Sandipan Das.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJcE7YGAAoJEFHr6jzI4aWA/rAP/2k8NqgbkfKMdY/nHQ/+Tvwu
6EdKZ5dMi875380TomrP80mIyAAwwtN/c1MmJT7plZRCwYcuhGk4UnQjTRcNzrfK
Q7SokdMAzSjSDaj7VPiVdpJ6yVaedZYmsRe9m+uP7frmcHr9KL4vjgDn3z8IL8bV
I46dvjuSCvgWhFvhXkxf9PHIsC+sP4Z6JRNVhyBjlzQHZiGparq238H8jJVsNHRs
f/fsze0z6m3S6dVKEZKZyDlCb3TkP+DjuXpv4hbT9nvnOY132kqO53L++7rQ2YvV
TNkabwFfj+p/DnrXXH7OHNkvnDW4cy3KjhyStOnTH5lxYYVYNd5vnjj1AnXa37xE
GCBFiHExEHbdG6vifwBmQjvoNRPf6Kh4RGYuRMm8ci7W0WUmq00LKZhxeLbwoou9
1K7lNp0JwLHgqOxCSy9liwNV7YQp1upvC/caQ1qE/ZISnUOXMLxomVfmGQYW51Xc
0/OXCdmacViA0RGatrGSScMO+CTNG0Wa3pm+fo/ufLahxspTDMVdJgs/kEfCAGeN
6BruUoEvm6wAOsPF8+zDumYOpUN9cD7tOQ573B2pMbJYIv3HJxRMDHYGBSijEgRK
xy8BbQ0ZtxgfILjIuA95QfGQ5V35ZjugQfM4mt33GPrQ/qIV9SJ+/zZJNISSqaKI
Y1xgZdJeVbECA9YYswRK
=wI/G
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"One notable fix for our change to split pt_regs between user/kernel,
we forgot to update BPF to use the user-visible type which was an ABI
break for BPF programs.
A slightly ugly but minimal fix to do_syscall_trace_enter() so that we
use tracehook_report_syscall_entry() properly. We'll rework the code
in next to avoid the empty if body.
Seven commits fixing bugs in the new papr_scm (Storage Class Memory)
driver. The driver was finally able to be tested on the other
hypervisor which exposed several bugs. The fixes are all fairly
minimal at least.
Fix a crash in our MSI code if an MSI-capable device is plugged into a
non-MSI capable PHB, only seen on older hardware (MPC8378).
Fix our legacy serial code to look for "stdout-path" since the device
trees were updated to use that instead of "linux,stdout-path".
A change to the COFF zImage code to fix booting old powermacs.
A couple of minor build fixes.
Thanks to: Benjamin Herrenschmidt, Daniel Axtens, Dmitry V. Levin,
Elvira Khabirova, Oliver O'Halloran, Paul Mackerras, Radu Rendec, Rob
Herring, Sandipan Das"
* tag 'powerpc-4.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/ptrace: replace ptrace_report_syscall() with a tracehook call
powerpc/mm: Fallback to RAM if the altmap is unusable
powerpc/papr_scm: Use ibm,unit-guid as the iset cookie
powerpc/papr_scm: Fix DIMM device registration race
powerpc/papr_scm: Remove endian conversions
powerpc/papr_scm: Update DT properties
powerpc/papr_scm: Fix resource end address
powerpc/papr_scm: Use depend instead of select
powerpc/bpf: Fix broken uapi for BPF_PROG_TYPE_PERF_EVENT
powerpc/boot: Fix build failures with -j 1
powerpc: Look for "stdout-path" when setting up legacy consoles
powerpc/msi: Fix NULL pointer access in teardown code
powerpc/mm: Fix linux page tables build with some configs
powerpc: Fix COFF zImage booting on old powermacs
When booting a kvm-pr guest on a POWER9 machine the following message is
observed:
"qemu-system-ppc64: KVM does not support 1TiB segments which guest expects"
This is because the guest is expecting to be able to use 1T segments
however we don't indicate support for it. This is because we don't set
the BOOK3S_HFLAG_MULTI_PGSIZE flag in the hflags in kvmppc_set_pvr_pr()
on POWER9.
POWER9 does indeed have support for 1T segments, so add a case for
POWER9 to the switch statement to ensure it is set.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Testing has revealed an occasional crash which appears to be caused
by a race between kvmppc_switch_mmu_to_hpt and kvm_unmap_hva_range_hv.
The symptom is a NULL pointer dereference in __find_linux_pte() called
from kvm_unmap_radix() with kvm->arch.pgtable == NULL.
Looking at kvmppc_switch_mmu_to_hpt(), it does indeed clear
kvm->arch.pgtable (via kvmppc_free_radix()) before setting
kvm->arch.radix to NULL, and there is nothing to prevent
kvm_unmap_hva_range_hv() or the other MMU callback functions from
being called concurrently with kvmppc_switch_mmu_to_hpt() or
kvmppc_switch_mmu_to_radix().
This patch therefore adds calls to spin_lock/unlock on the kvm->mmu_lock
around the assignments to kvm->arch.radix, and makes sure that the
partition-scoped radix tree or HPT is only freed after changing
kvm->arch.radix.
This also takes the kvm->mmu_lock in kvmppc_rmap_reset() to make sure
that the clearing of each rmap array (one per memslot) doesn't happen
concurrently with use of the array in the kvm_unmap_hva_range_hv()
or the other MMU callbacks.
Fixes: 18c3640cef ("KVM: PPC: Book3S HV: Add infrastructure for running HPT guests on radix host")
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
While the dma-direct code is (relatively) clean and simple we actually
have to use the swiotlb ops for the mapping on many architectures due
to devices with addressing limits. Instead of keeping two
implementations around this commit allows the dma-direct
implementation to call the swiotlb bounce buffering functions and
thus share the guts of the mapping implementation. This also
simplified the dma-mapping setup on a few architectures where we
don't have to differenciate which implementation to use.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
There is no need to have all setup and coherent allocation / freeing
routines inline. Move them out of line to keep the implemeation
nicely encapsulated and save some kernel text size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-12-11
The following pull-request contains BPF updates for your *net-next* tree.
It has three minor merge conflicts, resolutions:
1) tools/testing/selftests/bpf/test_verifier.c
Take first chunk with alignment_prevented_execution.
2) net/core/filter.c
[...]
case bpf_ctx_range_ptr(struct __sk_buff, flow_keys):
case bpf_ctx_range(struct __sk_buff, wire_len):
return false;
[...]
3) include/uapi/linux/bpf.h
Take the second chunk for the two cases each.
The main changes are:
1) Add support for BPF line info via BTF and extend libbpf as well
as bpftool's program dump to annotate output with BPF C code to
facilitate debugging and introspection, from Martin.
2) Add support for BPF_ALU | BPF_ARSH | BPF_{K,X} in interpreter
and all JIT backends, from Jiong.
3) Improve BPF test coverage on archs with no efficient unaligned
access by adding an "any alignment" flag to the BPF program load
to forcefully disable verifier alignment checks, from David.
4) Add a new bpf_prog_test_run_xattr() API to libbpf which allows for
proper use of BPF_PROG_TEST_RUN with data_out, from Lorenz.
5) Extend tc BPF programs to use a new __sk_buff field called wire_len
for more accurate accounting of packets going to wire, from Petar.
6) Improve bpftool to allow dumping the trace pipe from it and add
several improvements in bash completion and map/prog dump,
from Quentin.
7) Optimize arm64 BPF JIT to always emit movn/movk/movk sequence for
kernel addresses and add a dedicated BPF JIT backend allocator,
from Ard.
8) Add a BPF helper function for IR remotes to report mouse movements,
from Sean.
9) Various cleanups in BPF prog dump e.g. to make UAPI bpf_prog_info
member naming consistent with existing conventions, from Yonghong
and Song.
10) Misc cleanups and improvements in allowing to pass interface name
via cmdline for xdp1 BPF example, from Matteo.
11) Fix a potential segfault in BPF sample loader's kprobes handling,
from Daniel T.
12) Fix SPDX license in libbpf's README.rst, from Andrey.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Several conflicts, seemingly all over the place.
I used Stephen Rothwell's sample resolutions for many of these, if not
just to double check my own work, so definitely the credit largely
goes to him.
The NFP conflict consisted of a bug fix (moving operations
past the rhashtable operation) while chaning the initial
argument in the function call in the moved code.
The net/dsa/master.c conflict had to do with a bug fix intermixing of
making dsa_master_set_mtu() static with the fixing of the tagging
attribute location.
cls_flower had a conflict because the dup reject fix from Or
overlapped with the addition of port range classifiction.
__set_phy_supported()'s conflict was relatively easy to resolve
because Andrew fixed it in both trees, so it was just a matter
of taking the net-next copy. Or at least I think it was :-)
Joe Stringer's fix to the handling of netns id 0 in bpf_sk_lookup()
intermixed with changes on how the sdif and caller_net are calculated
in these code paths in net-next.
The remaining BPF conflicts were largely about the addition of the
__bpf_md_ptr stuff in 'net' overlapping with adjustments and additions
to the relevant data structure where the MD pointer macros are used.
Signed-off-by: David S. Miller <davem@davemloft.net>
Arch code should use tracehook_*() helpers, as documented in
include/linux/tracehook.h, ptrace_report_syscall() is not expected to
be used outside that file.
The patch does not look very nice, but at least it is correct
and opens the way for PTRACE_GET_SYSCALL_INFO API.
Co-authored-by: Dmitry V. Levin <ldv@altlinux.org>
Fixes: 5521eb4bca ("powerpc/ptrace: Add support for PTRACE_SYSEMU")
Signed-off-by: Elvira Khabirova <lineprinter@altlinux.org>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
[mpe: Take this as a minimal fix for 4.20, we'll rework it later]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull networking fixes from David Miller:
"A decent batch of fixes here. I'd say about half are for problems that
have existed for a while, and half are for new regressions added in
the 4.20 merge window.
1) Fix 10G SFP phy module detection in mvpp2, from Baruch Siach.
2) Revert bogus emac driver change, from Benjamin Herrenschmidt.
3) Handle BPF exported data structure with pointers when building
32-bit userland, from Daniel Borkmann.
4) Memory leak fix in act_police, from Davide Caratti.
5) Check RX checksum offload in RX descriptors properly in aquantia
driver, from Dmitry Bogdanov.
6) SKB unlink fix in various spots, from Edward Cree.
7) ndo_dflt_fdb_dump() only works with ethernet, enforce this, from
Eric Dumazet.
8) Fix FID leak in mlxsw driver, from Ido Schimmel.
9) IOTLB locking fix in vhost, from Jean-Philippe Brucker.
10) Fix SKB truesize accounting in ipv4/ipv6/netfilter frag memory
limits otherwise namespace exit can hang. From Jiri Wiesner.
11) Address block parsing length fixes in x25 from Martin Schiller.
12) IRQ and ring accounting fixes in bnxt_en, from Michael Chan.
13) For tun interfaces, only iface delete works with rtnl ops, enforce
this by disallowing add. From Nicolas Dichtel.
14) Use after free in liquidio, from Pan Bian.
15) Fix SKB use after passing to netif_receive_skb(), from Prashant
Bhole.
16) Static key accounting and other fixes in XPS from Sabrina Dubroca.
17) Partially initialized flow key passed to ip6_route_output(), from
Shmulik Ladkani.
18) Fix RTNL deadlock during reset in ibmvnic driver, from Thomas
Falcon.
19) Several small TCP fixes (off-by-one on window probe abort, NULL
deref in tail loss probe, SNMP mis-estimations) from Yuchung
Cheng"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (93 commits)
net/sched: cls_flower: Reject duplicated rules also under skip_sw
bnxt_en: Fix _bnxt_get_max_rings() for 57500 chips.
bnxt_en: Fix NQ/CP rings accounting on the new 57500 chips.
bnxt_en: Keep track of reserved IRQs.
bnxt_en: Fix CNP CoS queue regression.
net/mlx4_core: Correctly set PFC param if global pause is turned off.
Revert "net/ibm/emac: wrong bit is used for STA control"
neighbour: Avoid writing before skb->head in neigh_hh_output()
ipv6: Check available headroom in ip6_xmit() even without options
tcp: lack of available data can also cause TSO defer
ipv6: sr: properly initialize flowi6 prior passing to ip6_route_output
mlxsw: spectrum_switchdev: Fix VLAN device deletion via ioctl
mlxsw: spectrum_router: Relax GRE decap matching check
mlxsw: spectrum_switchdev: Avoid leaking FID's reference count
mlxsw: spectrum_nve: Remove easily triggerable warnings
ipv4: ipv6: netfilter: Adjust the frag mem limit when truesize changes
sctp: frag_point sanity check
tcp: fix NULL ref in tail loss probe
tcp: Do not underestimate rwnd_limited
net: use skb_list_del_init() to remove from RX sublists
...
GCC 4.6 manual says:
-funit-at-a-time
This option is left for compatibility reasons. -funit-at-a-time has
no effect, while -fno-unit-at-a-time implies -fno-toplevel-reorder
and -fno-section-anchors. Enabled by default.
Remove it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Richard Weinberger <richard@sigma-star.at>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/1541990120-9643-3-git-send-email-yamada.masahiro@socionext.com
The "altmap" is used to provide a pool of memory that is reserved for
the vmemmap backing of hot-plugged memory. This is useful when adding
large amount of ZONE_DEVICE memory to a system with a limited amount of
normal memory.
On ppc64 we use huge pages to map the vmemmap which requires the backing
storage to be contigious and aligned to the hugepage size. The altmap
implementation allows for the altmap provider to reserve a few PFNs at
the start of the range for it's own uses and when this occurs the
first chunk of the altmap is not usable for hugepage mappings. On hash
there is no sane way to fall back to a normal sized page mapping so we
fail the allocation. This results in memory hotplug failing with
ENOMEM when the new range doesn't fall into an existing vmemmap block.
This patch handles this case by falling back to using system memory
rather than failing if we cannot allocate from the altmap. This
fallback should only ever be used for the first vmemmap block so it
should not cause excess memory consumption.
Fixes: 7b73d978a5 ("mm: pass the vmem_altmap to vmemmap_populate")
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The interleave set cookie is used to determine if a label stored in the
metadata space should be applied to the current region. This is
important in the case of NVDIMMs since the firmware may change the
interleaving configuration of a DIMM which would invalidate the existing
labels. In our case the hypervisor hides those details from us so we
don't really care, but libnvdimm still requires the interleave set
cookie to be non-zero.
For our purposes we just need the set cookie to be unique and fixed for
a given PAPR SCM region and using the unit-guid (really a UUID) is fine
for this purpose.
Fixes: b5beae5e22 ("powerpc/pseries: Add driver for PAPR SCM regions")
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
[mpe: Use kernel types (u64)]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When a new nvdimm device is registered with libnvdimm via
nvdimm_create() it is added as a device on the nvdimm bus. The probe
function for the DIMM driver is potentially quite slow so actually
registering and probing the device is done in an async domain rather
than immediately after device creation. This can result in a race where
the region device (created 2nd) is probed first and fails to activate at
boot.
To fix this we use the same approach as the ACPI/NFIT driver which is to
check that all the DIMM devices registered successfully. LibNVDIMM
provides the nvdimm_bus_count_dimms() function which synchronises with
the async domain and verifies that the dimm was successfully registered
with the bus.
If either of these does not occur then we bail.
Fixes: b5beae5e22 ("powerpc/pseries: Add driver for PAPR SCM regions")
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The return values of a h-call are returned in the CPU registers and
written to the provided buffer by the plpar_hcall() wrapper. As a result
the values written to memory are always in the native endian and should
not be byte swapped.
The inital implementation of the H-Call interface was done in qemu and
the returned values were byte swapped unnecessarily in both the
hypervisor and in the driver so this was only noticed when bringing up
the PowerVM implementation.
Fixes: b5beae5e22 ("powerpc/pseries: Add driver for PAPR SCM regions")
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The ibm,unit-sizes property was originally specified as an array of two
u32s corresponding to the memory block size, and the number of blocks
available in that region. A fairly last-minute change to the SCM DT
specification was splitting that into two seperate u64 properties:
ibm,block-sizes and ibm,number-of-blocks that convey the same
information. No firmware / hypervisor that emitted the ibm,unit-size
property ever appeared in the wild.
Fixes: b5beae5e22 ("powerpc/pseries: Add driver for PAPR SCM regions")
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
[mpe: Use kernel types (u32/u64)]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Fix an off-by-one error in the memory resource range. This resource is
used to determine the address range of the memory to be hot-plugged as
ZONE_DEVICE memory. The current end address results in the kernel
attempting to map an additional memblock and the hypervisor may reject
the mapping resulting in the entire hot-plug failing.
Fixes: b5beae5e22 ("powerpc/pseries: Add driver for PAPR SCM regions")
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Making PAPR_SCM select LIBNVDIMM results in circular dependencies in
Kconfig when another symbol depends on it. Fix this by replacing the
select with a depends.
Fixes: b5beae5e22 ("powerpc/pseries: Add driver for PAPR SCM regions")
Reported-by: Alastair D'Silva <alastair@d-silva.org>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Now that there are different variants of pt_regs for userspace and
kernel, the uapi for the BPF_PROG_TYPE_PERF_EVENT program type must be
changed by exporting the user_pt_regs structure instead of the pt_regs
structure that is in-kernel only.
Fixes: 002af9391b ("powerpc: Split user/kernel definitions of struct pt_regs")
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
These days architectures are mostly out of the business of dealing with
struct scatterlist at all, unless they have architecture specific iommu
drivers. Replace the ARCH_HAS_SG_CHAIN symbol with a ARCH_NO_SG_CHAIN
one only enabled for architectures with horrible legacy iommu drivers
like alpha and parisc, and conditionally for arm which wants to keep it
disable for legacy platforms.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
The powerpc iommu code already returns (~(dma_addr_t)0x0) on mapping
failures, so we can switch over to returning DMA_MAPPING_ERROR and let
the core dma-mapping code handle the rest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
The dma-direct code already returns (~(dma_addr_t)0x0) on mapping
failures, so we can switch over to returning DMA_MAPPING_ERROR and let
the core dma-mapping code handle the rest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Memblock list is another source for usable system memory layout.
So move powerpc's arch_kexec_walk_mem() to common code so that other
memblock-based architectures, particularly arm64, can also utilise it.
A moved function is now renamed to kexec_walk_memblock() and integrated
into kexec_locate_mem_hole(), which will now be usable for all
architectures with no need for overriding arch_kexec_walk_mem().
With this change, arch_kexec_walk_mem() need no longer be a weak function,
and was now renamed to kexec_walk_resources().
Since powerpc doesn't support kdump in its kexec_file_load(), the current
kexec_walk_memblock() won't work for kdump either in this form, this will
be fixed in the next patch.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Acked-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
In commit 5e9dcb6188 ("powerpc/boot: Expose Kconfig symbols to
wrapper") we added a dependency to serial.c on autoconf.h:
$(obj)/serial.c: $(obj)/autoconf.h
This works when building in-tree (ie. with KBUILD_OUTPUT unset)
because the obj tree is the src tree.
But when building with eg. O=build and -j 1 the build fails:
gcc ... -I../arch/powerpc/boot -c -o arch/powerpc/boot/serial.o arch/powerpc/boot/serial.c
gcc: error: arch/powerpc/boot/serial.c: No such file or directory
Why this is only happening with -j 1 is not clear, when building with
-j greater than 1 somehow we decide to look for serial.c in the src
tree (../), eg:
gcc -I../arch/powerpc/boot -c -o arch/powerpc/boot/serial.o ../arch/powerpc/boot/serial.c
Regardless we shouldn't be specifying a dependency on serial.c in the
build tree, we want to add a dependency to the version in $(srctree)
so fix the rule to say that.
Fixes: 5e9dcb6188 ("powerpc/boot: Expose Kconfig symbols to wrapper")
Tested-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Alexei Starovoitov says:
====================
pull-request: bpf 2018-12-05
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) fix bpf uapi pointers for 32-bit architectures, from Daniel.
2) improve verifer ability to handle progs with a lot of branches, from Alexei.
3) strict btf checks, from Yonghong.
4) bpf_sk_lookup api cleanup, from Joe.
5) other misc fixes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The add_ssaaaa, sub_ddmmss, umul_ppmm and udiv_qrnnd macros originate
from GCC's longlong.h which in turn was copied from GMP's longlong.h a
few decades ago.
This was found when compiling with clang:
arch/powerpc/math-emu/fnmsub.c:46:2: error: invalid use of a cast in a
inline asm context requiring an l-value: remove the cast or build with
-fheinous-gnu-extensions
FP_ADD_D(R, T, B);
^~~~~~~~~~~~~~~~~
...
./arch/powerpc/include/asm/sfp-machine.h:283:27: note: expanded from
macro 'sub_ddmmss'
: "=r" ((USItype)(sh)), \
~~~~~~~~~~^~~
Segher points out: this was fixed in GCC over 16 years ago
( https://gcc.gnu.org/r56600 ), and in GMP (where it comes from)
presumably before that.
Update the add_ssaaaa, sub_ddmmss, umul_ppmm and udiv_qrnnd macros to
the latest GCC version in order to git rid of the invalid casts. These
were taken as-is from GCC's longlong in order to make future syncs
obvious. Other parts of sfp-machine.h were left as-is as the file
contains more features than present in longlong.h.
Link: https://github.com/ClangBuiltLinux/linux/issues/260
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
From what I've seen, every time this warning comes up it's bogus,
so let's ignore it.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As this is running with MMU off, the CPU only does speculative
fetch for code in the same page.
Following the significant size reduction of TLB handler routines,
the side handlers can be brought back close to the main part,
ie in the same page.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch reworks the TLB Miss handler in order to not use r12
register, hence avoiding having to save it into SPRN_SPRG_SCRATCH2.
In the DAR Fixup code we can now use SPRN_M_TW, freeing
SPRN_SPRG_SCRATCH2.
Then SPRN_SPRG_SCRATCH2 may be used for something else in the future.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Using this HW assistance implies some constraints on the
page table structure:
- Regardless of the main page size used (4k or 16k), the
level 1 table (PGD) contains 1024 entries and each PGD entry covers
a 4Mbytes area which is managed by a level 2 table (PTE) containing
also 1024 entries each describing a 4k page.
- 16k pages require 4 identifical entries in the L2 table
- 512k pages PTE have to be spread every 128 bytes in the L2 table
- 8M pages PTE are at the address pointed by the L1 entry and each
8M page require 2 identical entries in the PGD.
In order to use hardware assistance with 16K pages, this patch does
the following modifications:
- Make PGD size independent of the main page size
- In 16k pages mode, redefine pte_t as a struct with 4 elements,
and populate those 4 elements in __set_pte_at() and pte_update()
- Adapt the size of the hugepage tables.
- Define a PTE_FRAGMENT_NB so that a 16k page contains 4 page tables.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
For using 512k pages with hardware assistance, the PTEs have to be spread
every 128 bytes in the L2 table.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Today, on the 8xx the TLB handlers do SW tablewalk by doing all
the calculation in ASM, in order to match with the Linux page
table structure.
The 8xx offers hardware assistance which allows significant size
reduction of the TLB handlers, hence also reduces the time spent
in the handlers.
However, using this HW assistance implies some constraints on the
page table structure:
- Regardless of the main page size used (4k or 16k), the
level 1 table (PGD) contains 1024 entries and each PGD entry covers
a 4Mbytes area which is managed by a level 2 table (PTE) containing
also 1024 entries each describing a 4k page.
- 16k pages require 4 identifical entries in the L2 table
- 512k pages PTE have to be spread every 128 bytes in the L2 table
- 8M pages PTE are at the address pointed by the L1 entry and each
8M page require 2 identical entries in the PGD.
This patch modifies the TLB handlers to use HW assistance for 4K PAGES.
Before that patch, the mean time spent in TLB miss handlers is:
- ITLB miss: 80 ticks
- DTLB miss: 62 ticks
After that patch, the mean time spent in TLB miss handlers is:
- ITLB miss: 72 ticks
- DTLB miss: 54 ticks
So the improvement is 10% for ITLB and 13% for DTLB misses
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In preparation of making use of hardware assistance in TLB handlers,
this patch temporarily disables 16K pages and hugepages. The reason
is that when using HW assistance in 4K pages mode, the linux model
fit with the HW model for 4K pages and 8M pages.
However for 16K pages and 512K mode some additional work is needed
to get linux model fit with HW model.
For the 8M pages, they will naturaly come back when we switch to
HW assistance, without any additional handling.
In order to keep the following patch smaller, the removal of the
current special handling for 8M pages gets removed here as well.
Therefore the 4K pages mode will be implemented first and without
support for 512k hugepages. Then the 512k hugepages will be brought
back. And the 16K pages will be implemented in the following step.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In order to simplify time critical exceptions handling 8xx
specific SW perf counters, this patch moves the counters into
the beginning of memory. This is possible because .text is readable
and the counters are never modified outside of the handlers.
By doing this, we avoid having to set a second register with
the upper part of the address of the counters.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pgtable_cache_add() gracefully handles the case when a cache that
size already exists by returning early with the following test:
if (PGT_CACHE(shift))
return; /* Already have a cache of this size */
It is then not needed to test the existence of the cache before.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Instead of opencoding cache handling for the special case
of hugepage tables having a single pte_t element, this
patch makes use of the common pgtable_cache helpers
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
hugepages uses a cache of order 0. Lets allow page tables
of order 0 in the common part in order to avoid open coding
in hugetlb
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In order to allow the 8xx to handle pte_fragments, this patch
extends the use of pte_fragments to PPC32 platforms.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In order to handle pte_fragment functions with single fragment
without adding pte_frag in all mm_context_t, this patch creates
two helpers which do nothing on platforms using a single fragment.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch move pgtable_t into platform headers.
It gets rid of the CONFIG_PPC_64K_PAGES case for PPC64
as nohash/64 doesn't support CONFIG_PPC_64K_PAGES.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The purpose of this patch is to move platform specific
mmu-xxx.h files in platform directories like pte-xxx.h files.
In the meantime this patch creates common nohash and
nohash/32 + nohash/64 mmu.h files for future common parts.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There is no point in taking the page table lock as pte_frag or
pmd_frag are always NULL when we have only one fragment.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In preparation of next patch which generalises the use of
pte_fragment_alloc() for all, this patch moves the related functions
in a place that is common to all subarches.
The 8xx will need that for supporting 16k pages, as in that mode
page tables still have a size of 4k.
Since pte_fragment with only once fragment is not different
from what is done in the general case, we can easily migrate all
subarchs to pte fragments.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
commit 1bc54c0311 ("powerpc: rework 4xx PTE access and TLB miss")
introduced non atomic PTE updates and started the work of removing
PTE updates in TLB miss handlers, but kept PTE_ATOMIC_UPDATES for the
8xx with the following comment:
/* Until my rework is finished, 8xx still needs atomic PTE updates */
commit fe11dc3f96 ("powerpc/8xx: Update TLB asm so it behaves as
linux mm expects") removed all PTE updates done in TLB miss handlers
Therefore, atomic PTE updates are not needed anymore for the 8xx
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There is a plan to build the kernel with -Wimplicit-fallthrough and these
places in the code produced warnings, but because we build arch/powerpc
with -Werror, they became errors. Fix them up.
This patch produces no change in behaviour, but should be reviewed in
case these are actually bugs not intentional fallthoughs.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit f384796c40 ("powerpc/mm: Add support for handling > 512TB address
in SLB miss") removed function slb_miss_bad_addr(struct pt_regs *regs), but
kept its declaration in the prototype file. This patch simply removes the
function definition.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently xmon needs to get devtree_lock (through rtas_token()) during its
invocation (at crash time). If there is a crash while devtree_lock is being
held, then xmon tries to get the lock but spins forever and never get into
the interactive debugger, as in the following case:
int *ptr = NULL;
raw_spin_lock_irqsave(&devtree_lock, flags);
*ptr = 0xdeadbeef;
This patch avoids calling rtas_token(), thus trying to get the same lock,
at crash time. This new mechanism proposes getting the token at
initialization time (xmon_init()) and just consuming it at crash time.
This would allow xmon to be possible invoked independent of devtree_lock
being held or not.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull RCU changes from Paul E. McKenney:
- Convert RCU's BUG_ON() and similar calls to WARN_ON() and similar.
- Replace calls of RCU-bh and RCU-sched update-side functions
to their vanilla RCU counterparts. This series is a step
towards complete removal of the RCU-bh and RCU-sched update-side
functions.
( Note that some of these conversions are going upstream via their
respective maintainers. )
- Documentation updates, including a number of flavor-consolidation
updates from Joel Fernandes.
- Miscellaneous fixes.
- Automate generation of the initrd filesystem used for
rcutorture testing.
- Convert spin_is_locked() assertions to instead use lockdep.
( Note that some of these conversions are going upstream via their
respective maintainers. )
- SRCU updates, especially including a fix from Dennis Krein
for a bag-on-head-class bug.
- RCU torture-test updates.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Instead of running with interrupts disabled, use a semaphore. This should
make it easier for backends that may need to sleep (e.g. EFI) when
performing a write:
|BUG: sleeping function called from invalid context at kernel/sched/completion.c:99
|in_atomic(): 1, irqs_disabled(): 1, pid: 2236, name: sig-xstate-bum
|Preemption disabled at:
|[<ffffffff99d60512>] pstore_dump+0x72/0x330
|CPU: 26 PID: 2236 Comm: sig-xstate-bum Tainted: G D 4.20.0-rc3 #45
|Call Trace:
| dump_stack+0x4f/0x6a
| ___might_sleep.cold.91+0xd3/0xe4
| __might_sleep+0x50/0x90
| wait_for_completion+0x32/0x130
| virt_efi_query_variable_info+0x14e/0x160
| efi_query_variable_store+0x51/0x1a0
| efivar_entry_set_safe+0xa3/0x1b0
| efi_pstore_write+0x109/0x140
| pstore_dump+0x11c/0x330
| kmsg_dump+0xa4/0xd0
| oops_exit+0x22/0x30
...
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Fixes: 21b3ddd39f ("efi: Don't use spinlocks for efi vars")
Signed-off-by: Kees Cook <keescook@chromium.org>
Once the JITed images for each function in a multi-function program
are generated after the first three JIT passes, we only need to fix
the target address for the branch instruction corresponding to each
bpf-to-bpf function call.
This introduces the following optimizations for reducing the work
done by the JIT compiler when handling multi-function programs:
[1] Instead of doing two extra passes to fix the bpf function calls,
do just one as that would be sufficient.
[2] During the extra pass, only overwrite the instruction sequences
for the bpf-to-bpf function calls as everything else would still
remain exactly the same. This also reduces the number of writes
to the JITed image.
[3] Do not regenerate the prologue and the epilogue during the extra
pass as that would be redundant.
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit 78e5dfea84 ("powerpc: dts: replace 'linux,stdout-path' with
'stdout-path'") broke the default console on a number of embedded
PowerPC systems, because it failed to also update the code in
arch/powerpc/kernel/legacy_serial.c to look for that property in
addition to the old one.
This fixes it.
Fixes: 78e5dfea84 ("powerpc: dts: replace 'linux,stdout-path' with 'stdout-path'")
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
was introduced by a patch that tried to fix one bug, but by doing so created
another bug. As both bugs corrupt the output (but they do not crash the
kernel), I decided to fix the design such that it could have both bugs
fixed. The original fix, fixed time reporting of the function graph tracer
when doing a max_depth of one. This was code that can test how much the
kernel interferes with userspace. But in doing so, it could corrupt the time
keeping of the function profiler.
The issue is that the curr_ret_stack variable was being used for two
different meanings. One was to keep track of the stack pointer on the
ret_stack (shadow stack used by the function graph tracer), and the other
use case was the graph call depth. Although, the two may be closely
related, where they got updated was the issue that lead to the two different
bugs that required the two use cases to be updated differently.
The big issue with this fix is that it requires changing each architecture.
The good news is, I was able to remove a lot of code that was duplicated
within the architectures and place it into a single location. Then I could
make the fix in one place.
I pushed this code into linux-next to let it settle over a week, and before
doing so, I cross compiled all the affected architectures to make sure that
they built fine.
In the mean time, I also pulled in a patch that fixes the sched_switch
previous tasks state output, that was not actually correct.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW/4NPhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnWAAQCyUIRLgYImr81eTl52lxNRsULk+aiI
U29kRFWWU0c40AEA1X9sDF0MgOItbRGfZtnHTZEousXRDaDf4Fge2kF7Egg=
=liQ0
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"While rewriting the function graph tracer, I discovered a design flaw
that was introduced by a patch that tried to fix one bug, but by doing
so created another bug.
As both bugs corrupt the output (but they do not crash the kernel), I
decided to fix the design such that it could have both bugs fixed. The
original fix, fixed time reporting of the function graph tracer when
doing a max_depth of one. This was code that can test how much the
kernel interferes with userspace. But in doing so, it could corrupt
the time keeping of the function profiler.
The issue is that the curr_ret_stack variable was being used for two
different meanings. One was to keep track of the stack pointer on the
ret_stack (shadow stack used by the function graph tracer), and the
other use case was the graph call depth. Although, the two may be
closely related, where they got updated was the issue that lead to the
two different bugs that required the two use cases to be updated
differently.
The big issue with this fix is that it requires changing each
architecture. The good news is, I was able to remove a lot of code
that was duplicated within the architectures and place it into a
single location. Then I could make the fix in one place.
I pushed this code into linux-next to let it settle over a week, and
before doing so, I cross compiled all the affected architectures to
make sure that they built fine.
In the mean time, I also pulled in a patch that fixes the sched_switch
previous tasks state output, that was not actually correct"
* tag 'trace-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
sched, trace: Fix prev_state output in sched_switch tracepoint
function_graph: Have profiler use curr_ret_stack and not depth
function_graph: Reverse the order of pushing the ret_stack and the callback
function_graph: Move return callback before update of curr_ret_stack
function_graph: Use new curr_ret_depth to manage depth instead of curr_ret_stack
function_graph: Make ftrace_push_return_trace() static
sparc/function_graph: Simplify with function_graph_enter()
sh/function_graph: Simplify with function_graph_enter()
s390/function_graph: Simplify with function_graph_enter()
riscv/function_graph: Simplify with function_graph_enter()
powerpc/function_graph: Simplify with function_graph_enter()
parisc: function_graph: Simplify with function_graph_enter()
nds32: function_graph: Simplify with function_graph_enter()
MIPS: function_graph: Simplify with function_graph_enter()
microblaze: function_graph: Simplify with function_graph_enter()
arm64: function_graph: Simplify with function_graph_enter()
ARM: function_graph: Simplify with function_graph_enter()
x86/function_graph: Simplify with function_graph_enter()
function_graph: Create function_graph_enter() to consolidate architecture code
The arch_teardown_msi_irqs() function assumes that controller ops
pointers were already checked in arch_setup_msi_irqs(), but this
assumption is wrong: arch_teardown_msi_irqs() can be called even when
arch_setup_msi_irqs() returns an error (-ENOSYS).
This can happen in the following scenario:
- msi_capability_init() calls pci_msi_setup_msi_irqs()
- pci_msi_setup_msi_irqs() returns -ENOSYS
- msi_capability_init() notices the error and calls free_msi_irqs()
- free_msi_irqs() calls pci_msi_teardown_msi_irqs()
This is easier to see when CONFIG_PCI_MSI_IRQ_DOMAIN is not set and
pci_msi_setup_msi_irqs() and pci_msi_teardown_msi_irqs() are just
aliases to arch_setup_msi_irqs() and arch_teardown_msi_irqs().
The call to free_msi_irqs() upon pci_msi_setup_msi_irqs() failure
seems legit, as it does additional cleanup; e.g.
list_del(&entry->list) and kfree(entry) inside free_msi_irqs() do
happen (MSI descriptors are allocated before pci_msi_setup_msi_irqs()
is called and need to be cleaned up if that fails).
Fixes: 6b2fd7efeb ("PCI/MSI/PPC: Remove arch_msi_check_device()")
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Radu Rendec <radu.rendec@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Trivial conflict in net/core/filter.c, a locally computed
'sdif' is now an argument to the function.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) ARM64 JIT fixes for subprog handling from Daniel Borkmann.
2) Various sparc64 JIT bug fixes (fused branch convergance, frame
pointer usage detection logic, PSEODU call argument handling).
3) Fix to use BH locking in nf_conncount, from Taehee Yoo.
4) Fix race of TX skb freeing in ipheth driver, from Bernd Eckstein.
5) Handle return value of TX NAPI completion properly in lan743x
driver, from Bryan Whitehead.
6) MAC filter deletion in i40e driver clears wrong state bit, from
Lihong Yang.
7) Fix use after free in rionet driver, from Pan Bian.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (53 commits)
s390/qeth: fix length check in SNMP processing
net: hisilicon: remove unexpected free_netdev
rapidio/rionet: do not free skb before reading its length
i40e: fix kerneldoc for xsk methods
ixgbe: recognize 1000BaseLX SFP modules as 1Gbps
i40e: Fix deletion of MAC filters
igb: fix uninitialized variables
netfilter: nf_tables: deactivate expressions in rule replecement routine
lan743x: Enable driver to work with LAN7431
tipc: fix lockdep warning during node delete
lan743x: fix return value for lan743x_tx_napi_poll
net: via: via-velocity: fix spelling mistake "alignement" -> "alignment"
qed: fix spelling mistake "attnetion" -> "attention"
net: thunderx: fix NULL pointer dereference in nic_remove
sctp: increase sk_wmem_alloc when head->truesize is increased
firestream: fix spelling mistake: "Inititing" -> "Initializing"
net: phy: add workaround for issue where PHY driver doesn't bind to the device
usbnet: ipheth: fix potential recvmsg bug and recvmsg bug 2
sparc: Adjust bpf JIT prologue for PSEUDO calls.
bpf, doc: add entries of who looks over which jits
...
The function_graph_enter() function does the work of calling the function
graph hook function and the management of the shadow stack, simplifying the
work done in the architecture dependent prepare_ftrace_return().
Have powerpc use the new code, and remove the shadow stack management as well as
having to set up the trace structure.
This is needed to prepare for a fix of a design bug on how the curr_ret_stack
is used.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: stable@kernel.org
Fixes: 03274a3ffb ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Make fetching of the BPF call address from ppc64 JIT generic. ppc64
was using a slightly different variant rather than through the insns'
imm field encoding as the target address would not fit into that space.
Therefore, the target subprog number was encoded into the insns' offset
and fetched through fp->aux->func[off]->bpf_func instead. Given there
are other JITs with this issue and the mechanism of fetching the address
is JIT-generic, move it into the core as a helper instead. On the JIT
side, we get information on whether the retrieved address is a fixed
one, that is, not changing through JIT passes, or a dynamic one. For
the former, JITs can optimize their imm emission because this doesn't
change jump offsets throughout JIT process.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Sandipan Das <sandipan@linux.ibm.com>
Tested-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For some configs the build fails with:
arch/powerpc/mm/dump_linuxpagetables.c: In function 'populate_markers':
arch/powerpc/mm/dump_linuxpagetables.c:306:39: error: 'PKMAP_BASE' undeclared (first use in this function)
arch/powerpc/mm/dump_linuxpagetables.c:314:50: error: 'LAST_PKMAP' undeclared (first use in this function)
These come from highmem.h, including that fixes the build.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 6975a783d7 ("powerpc/boot: Allow building the zImage wrapper
as a relocatable ET_DYN", 2011-04-12) changed the procedure descriptor
at the start of crt0.S to have a hard-coded start address of 0x500000
rather than a reference to _zimage_start, presumably because having
a reference to a symbol introduced a relocation which is awkward to
handle in a position-independent executable. Unfortunately, what is
at 0x500000 in the COFF image is not the first instruction, but the
procedure descriptor itself, that is, a word containing 0x500000,
which is not a valid instruction. Hence, booting a COFF zImage
results in a "DEFAULT CATCH!, code=FFF00700" message from Open
Firmware.
This fixes the problem by (a) putting the procedure descriptor in the
data section and (b) adding a branch to _zimage_start as the first
instruction in the program.
Fixes: 6975a783d7 ("powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
PPC_STD_MMU_32 and PPC_STD_MMU are not used anymore. Remove them.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Today we have:
config PPC_BOOK3S
def_bool y
depends on PPC_BOOK3S_32 || PPC_BOOK3S_64
config PPC_STD_MMU
def_bool y
depends on PPC_BOOK3S
PPC_STD_MMU is therefore redundant with PPC_BOOK3S. Lets remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Today we have:
config PPC_BOOK3S_32
bool "512x/52xx/6xx/7xx/74xx/82xx/83xx/86xx"
[depends on PPC32 within a choice]
config PPC_BOOK3S
def_bool y
depends on PPC_BOOK3S_32 || PPC_BOOK3S_64
config PPC_STD_MMU
def_bool y
depends on PPC_BOOK3S
config PPC_STD_MMU_32
def_bool y
depends on PPC_STD_MMU && PPC32
PPC_STD_MMU_32 is therefore redundant with PPC_BOOK3S_32.
In order to make the code clearer, lets use preferably PPC_BOOK3S_32.
This will allow to remove CONFIG_PPC_STD_MMU_32 in a later patch.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
asm/book3s/32/pgtable.h is only included when CONFIG_PPC_BOOK3S_32 is set.
Whenever CONFIG_PPC_BOOK3S_32 is set, CONFIG_PPC_STD_MMU_32 is set as well.
This patch removes useless CONFIG_PPC_STD_MMU_32 #ifdefs
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
CONFIG_6xx is not used anymore. Remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Today we have:
config PPC_BOOK3S_32
bool "512x/52xx/6xx/7xx/74xx/82xx/83xx/86xx"
[depends on PPC32 within a choice]
config PPC_BOOK3S
def_bool y
depends on PPC_BOOK3S_32 || PPC_BOOK3S_64
config 6xx
def_bool y
depends on PPC32 && PPC_BOOK3S
6xx is therefore redundant with PPC_BOOK3S_32.
In order to make the code clearer, lets use preferably PPC_BOOK3S_32.
This will allow to remove CONFIG_6xx in a later patch.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Remove directly accessing device_node.type pointer and use the
accessors instead. This will eventually allow removing the type
pointer.
Replace the open coded iterating over child nodes with
for_each_child_of_node() while we're here.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Remove directly accessing device_node.type pointer and use the
accessors instead. This will eventually allow removing the type
pointer.
In the process, the of_stdout pointer can be used instead of finding
the stdout node again.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds new defconfig options for powerpc KVM guest
and guest.config with additional config symbols enabled,
which is to build kernel to boot without initramfs and can be used
as place holder for guest specific additional config symbols in future.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds missing config symbols for ppc64_defconfig
to enable cgroups, memhotplug, numa balancing and XFS
in core kernel image.
Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
CONFIG_NR_CPUS is not set in ppc64_defconfig, So it gets default of 32
which is quite small for modern powerpc systems. Instead set a default
of 2048 like other powerpc defconfigs.
Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Update ppc64_defconfig with savedefconfig. No symbols are added or
removed, this is 100% movement.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In commit 539df7fcb3 ("powerpc/configs: Enable function trace by
default") we added:
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
To ppc64_defconfig, powernv_defconfig and pseries_defconfig.
But only CONFIG_FUNCTION_TRACER=y is required, CONFIG_FTRACE is
default y if DEBUG_KERNEL is enabled, which we have. And then
CONFIG_FUNCTION_GRAPH_TRACER is default y when CONFIG_FUNCTION_TRACER
is enabled.
The extra symbols were already removed from powernv_defconfig in
commit 9a018fb1e1 ("powerpc/config: powernv_defconfig updates").
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This has a single 1-line patch which fixes a bug in the recently-merged
nested HV KVM support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJb7pbhAAoJEJ2a6ncsY3Gf8UIIAKgiocLz4jTrWYaR/OVbg6EY
tSJQBbsi6bEAog/FZMWDG0zL0YB4s+wXu34RiTt/P7g0VzHFTmR6ZHIJPiSd78aH
oxe8H7TOVq8/EmD0TwREVgUe1qIHgLBkVkk05b0P0nlpeO5bzWQBco2No2mfKWOq
yZcK03QWBsVaq0xhZFM/c0SkxBYOIDcm1kG+XNpOcsmWGXin96TlK+2WohOIH5nY
+16vI61n7/jBjdoxQS0Lw8OAfsA8CjY9GaKf3MuFYe93anZUv2s8FrAv35qUwzBg
5/Y/f+EB5AKMf3XR2A8nJ6HmoeXUFu4NUxT1YAQPAUcrxkENcsaRHDe2Uwt1QIk=
=iPcL
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-fixes-4.20-1' of https://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
PPC KVM fixes for 4.20
This has a single 1-line patch which fixes a bug in the recently-merged
nested HV KVM support.
There is no need to have the 'void __iomem *cpld_base' variable static
since new value always be assigned before use it.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There is no need to have the 'intoffset' variable static since new value
always be assigned before use it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When compiled for 64-bit, the PD_HUGE constant is a 64-bit integer.
Mark it as an unsigned long.
This squashes over a thousand sparse warnings on my minimal T4240RDB
(e6500, ppc64be) config, of the following 2 forms:
arch/powerpc/include/asm/hugetlb.h:52:49: warning: constant 0x8000000000000000 is so big it is unsigned long
arch/powerpc/include/asm/nohash/pgtable.h:269:49: warning: constant 0x8000000000000000 is so big it is unsigned long
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Type qualifier on return type is ignored. Remove warning in W=1:
arch/powerpc/include/asm/book3s/64/pgtable.h:1268:25: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When both `CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y` and `CONFIG_UBSAN=y`
are set, link step typically produce numberous warnings about orphan
section:
+ powerpc-linux-gnu-ld -EB -m elf32ppc -Bstatic --orphan-handling=warn --build-id --gc-sections -X -o .tmp_vmlinux1 -T ./arch/powerpc/kernel/vmlinux.lds --who
le-archive built-in.a --no-whole-archive --start-group lib/lib.a --end-group
powerpc-linux-gnu-ld: warning: orphan section `.data..Lubsan_data393' from `init/main.o' being placed in section `.data..Lubsan_data393'.
powerpc-linux-gnu-ld: warning: orphan section `.data..Lubsan_data394' from `init/main.o' being placed in section `.data..Lubsan_data394'.
...
powerpc-linux-gnu-ld: warning: orphan section `.data..Lubsan_type11' from `init/main.o' being placed in section `.data..Lubsan_type11'.
powerpc-linux-gnu-ld: warning: orphan section `.data..Lubsan_type12' from `init/main.o' being placed in section `.data..Lubsan_type12'.
...
This commit remove those warnings produced at W=1.
Link: https://www.mail-archive.com/linuxppc-dev@lists.ozlabs.org/msg135407.html
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Function huge_ptep_set_access_flags() has the 'extern' keyword in the
function definition and also in the function declaration. This causes a
warning in 'sparse' since the 'extern' storage class should not be used
in the function definition.
arch/powerpc/mm/pgtable.c:232:12: warning: function 'huge_ptep_set_access_flags' with external linkage has definition
This patch removes the keyword from the definition part. It also removes
the extern keyword from the declaration part, since checkpatch --strict
complains about it.
Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Sparse tool is showing some warnings on pkeys.c file, mainly related to
storage class identifiers. There are static variables and functions not
declared as such. The same thing happens with an extern function, which
misses the header inclusion.
arch/powerpc/mm/pkeys.c:14:6: warning: symbol 'pkey_execute_disable_supported' was not declared. Should it be static?
arch/powerpc/mm/pkeys.c:16:6: warning: symbol 'pkeys_devtree_defined' was not declared. Should it be static?
arch/powerpc/mm/pkeys.c:19:6: warning: symbol 'pkey_amr_mask' was not declared. Should it be static?
arch/powerpc/mm/pkeys.c:20:6: warning: symbol 'pkey_iamr_mask' was not declared. Should it be static?
arch/powerpc/mm/pkeys.c:21:6: warning: symbol 'pkey_uamor_mask' was not declared. Should it be static?
arch/powerpc/mm/pkeys.c:22:6: warning: symbol 'execute_only_key' was not declared. Should it be static?
arch/powerpc/mm/pkeys.c:60:5: warning: symbol 'pkey_initialize' was not declared. Should it be static?
arch/powerpc/mm/pkeys.c:404:6: warning: symbol 'arch_vma_access_permitted' was not declared. Should it be static?
This patch fix al the warning, basically turning all global variables that
are not declared as extern at asm/pkeys.h into static.
It also includes asm/mmu_context.h header, which contains the definition of
arch_vma_access_permitted.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There are three symbols (two variables and a function) that are being used
solely in the same file (imc-pmu.c), thus, these symbols should be static,
but they are not. This was detected by sparse:
arch/powerpc/perf/imc-pmu.c:31:20: warning: symbol 'nest_imc_refc' was not declared. Should it be static?
arch/powerpc/perf/imc-pmu.c:37:20: warning: symbol 'core_imc_refc' was not declared. Should it be static?
arch/powerpc/perf/imc-pmu.c:46:16: warning: symbol 'imc_event_to_pmu' was not declared. Should it be static?
This patch simply adds the 'static' storage-class definition to these
symbols, thus, restricting their usage only in the imc-pmu.c file.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Function scom_map_device() returns data type 'scom_map_t', which is a
typedef for 'void *'. This functions is currently returning NULL and zero,
which causes the following warning by 'sparse':
arch/powerpc/sysdev/scom.c:63:24: warning: Using plain integer as NULL pointer
arch/powerpc/sysdev/scom.c:86:24: warning: Using plain integer as NULL pointer
This patch simply replaces zero by NULL.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Functions do_stf_{entry,exit}_barrier_fixups are static but not declared as
such. This was detected by `sparse` tool with the following warning:
arch/powerpc/lib/feature-fixups.c:121:6: warning: symbol 'do_stf_entry_barrier_fixups' was not declared. Should it be static?
arch/powerpc/lib/feature-fixups.c:171:6: warning: symbol 'do_stf_exit_barrier_fixups' was not declared. Should it be static?
This patch declares both functions as static, as they are only called by
do_stf_barrier_fixups(), which is in the same source code file.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently sparse is complaining about three issues on the xmon code. Two
storage classes issues and a dereferencing a 'noderef' pointer. These are
the warnings:
arch/powerpc/xmon/xmon.c:2783:1: warning: symbol 'dump_log_buf' was not declared. Should it be static?
arch/powerpc/xmon/xmon.c:2989:6: warning: symbol 'format_pte' was not declared. Should it be static?
arch/powerpc/xmon/xmon.c:2983:30: warning: dereference of noderef expression
This patch fixes all of them, turning both functions static and
dereferencing a pointer calling rcu_dereference() instead of a
straightforward dereference.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Sparse shows that xive_do_source_eoi() file is defined without any
declaration, thus, it should be a static function.
arch/powerpc/sysdev/xive/common.c:312:6: warning: symbol 'xive_do_source_eoi' was not declared. Should it be static?
This patch simply turns this symbol into static.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Function pci_ers_result_name() is a static function, although not declared
as such. This was detected by sparse in the following warning
arch/powerpc/kernel/eeh_driver.c:63:12: warning: symbol 'pci_ers_result_name' was not declared. Should it be static?
This patch simply declares the function a static.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Current powerpc security.c file is defining functions, as
cpu_show_meltdown(), cpu_show_spectre_v{1,2} and others, that are being
declared at linux/cpu.h header without including the header file that
contains these declarations.
This is being reported by sparse, which thinks that these functions are
static, due to the lack of declaration:
arch/powerpc/kernel/security.c:105:9: warning: symbol 'cpu_show_meltdown' was not declared. Should it be static?
arch/powerpc/kernel/security.c:139:9: warning: symbol 'cpu_show_spectre_v1' was not declared. Should it be static?
arch/powerpc/kernel/security.c:161:9: warning: symbol 'cpu_show_spectre_v2' was not declared. Should it be static?
arch/powerpc/kernel/security.c:209:6: warning: symbol 'stf_barrier' was not declared. Should it be static?
arch/powerpc/kernel/security.c:289:9: warning: symbol 'cpu_show_spec_store_bypass' was not declared. Should it be static?
This patch simply includes the proper header (linux/cpu.h) to match
function definition and declaration.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Let architectures opt into EISA support by selecting HAVE_EISA and
handle everything else in drivers/eisa.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
There is no good reason to duplicate the RAPIDIO menu in various
architectures. Instead provide a selectable HAVE_RAPIDIO symbol
that indicates native availability of RAPIDIO support and the handle
the rest in drivers/pci. This also means we now provide support
for PCI(e) to Rapidio bridges for every architecture instead of a
limited subset.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
There is nothing architecture specific in the PCMCIA core, so allow
building it everywhere. The actual host controllers will depend on ISA,
PCI or a specific SOC.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Let architectures select the syscall support instead of duplicating the
kconfig entry.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Move the definitions to drivers/pci and let the architectures select
them. Two small differences to before: PCI_DOMAINS_GENERIC now selects
PCI_DOMAINS, cutting down the churn for modern architectures. As the
only architectured arm did previously also offer PCI_DOMAINS as a user
visible choice in addition to selecting it from the relevant configs,
this is gone now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
There is no good reason to duplicate the PCI menu in every architecture.
Instead provide a selectable HAVE_PCI symbol that indicates availability
of PCI support, and a FORCE_PCI symbol to for PCI on and the handle the
rest in drivers/pci.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Replace VLAN_TAG_PRESENT with single bit flag and free up
VLAN.CFI overload. Now VLAN.CFI is visible in networking stack
and can be passed around intact.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 4c2de74cc8 ("powerpc/64: Interrupts save PPR on stack rather
than thread_struct") changed sizeof(struct pt_regs) % 16 from 0 to 8,
which causes the interrupt frame allocation on kernel entry to put the
kernel stack out of alignment.
Quadword (16-byte) alignment for the stack is required by both the
64-bit v1 ABI (v1.9 § 3.2.2) and the 64-bit v2 ABI (v1.1 § 2.2.2.1).
Add a pad field to fix alignment, and add a BUILD_BUG_ON to catch this
in future.
Fixes: 4c2de74cc8 ("powerpc/64: Interrupts save PPR on stack rather than thread_struct")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
While running a nested guest VCPU on L0 via H_ENTER_NESTED hcall, a
pending signal in the L0 QEMU process can generate the following
sequence:
ret0 = kvmppc_pseries_do_hcall()
ret1 = kvmhv_enter_nested_guest()
ret2 = kvmhv_run_single_vcpu()
if (ret2 == -EINTR)
return H_INTERRUPT
if (ret1 == H_INTERRUPT)
kvmppc_set_gpr(vcpu, 3, 0)
return -EINTR
/* skipped: */
kvmppc_set_gpr(vcpu, 3, ret)
vcpu->arch.hcall_needed = 0
return RESUME_GUEST
which causes an exit to L0 userspace with ret0 == -EINTR.
The intention seems to be to set the hcall return value to 0 (via
VCPU r3) so that L1 will see a successful return from H_ENTER_NESTED
once we resume executing the VCPU. However, because we don't set
vcpu->arch.hcall_needed = 0, we do the following once userspace
resumes execution via kvm_arch_vcpu_ioctl_run():
...
} else if (vcpu->arch.hcall_needed) {
int i
kvmppc_set_gpr(vcpu, 3, run->papr_hcall.ret);
for (i = 0; i < 9; ++i)
kvmppc_set_gpr(vcpu, 4 + i, run->papr_hcall.args[i]);
vcpu->arch.hcall_needed = 0;
since vcpu->arch.hcall_needed == 1 indicates that userspace should
have handled the hcall and stored the return value in
run->papr_hcall.ret. Since that's not the case here, we can get an
unexpected value in VCPU r3, which can result in
kvmhv_p9_guest_entry() reporting an unexpected trap value when it
returns from H_ENTER_NESTED, causing the following register dump to
console via subsequent call to kvmppc_handle_exit_hv() in L1:
[ 350.612854] vcpu 00000000f9564cf8 (0):
[ 350.612915] pc = c00000000013eb98 msr = 8000000000009033 trap = 1
[ 350.613020] r 0 = c0000000004b9044 r16 = 0000000000000000
[ 350.613075] r 1 = c00000007cffba30 r17 = 0000000000000000
[ 350.613120] r 2 = c00000000178c100 r18 = 00007fffc24f3b50
[ 350.613166] r 3 = c00000007ef52480 r19 = 00007fffc24fff58
[ 350.613212] r 4 = 0000000000000000 r20 = 00000a1e96ece9d0
[ 350.613253] r 5 = 70616d00746f6f72 r21 = 00000a1ea117c9b0
[ 350.613295] r 6 = 0000000000000020 r22 = 00000a1ea1184360
[ 350.613338] r 7 = c0000000783be440 r23 = 0000000000000003
[ 350.613380] r 8 = fffffffffffffffc r24 = 00000a1e96e9e124
[ 350.613423] r 9 = c00000007ef52490 r25 = 00000000000007ff
[ 350.613469] r10 = 0000000000000004 r26 = c00000007eb2f7a0
[ 350.613513] r11 = b0616d0009eccdb2 r27 = c00000007cffbb10
[ 350.613556] r12 = c0000000004b9000 r28 = c00000007d83a2c0
[ 350.613597] r13 = c000000001b00000 r29 = c0000000783cdf68
[ 350.613639] r14 = 0000000000000000 r30 = 0000000000000000
[ 350.613681] r15 = 0000000000000000 r31 = c00000007cffbbf0
[ 350.613723] ctr = c0000000004b9000 lr = c0000000004b9044
[ 350.613765] srr0 = 0000772f954dd48c srr1 = 800000000280f033
[ 350.613808] sprg0 = 0000000000000000 sprg1 = c000000001b00000
[ 350.613859] sprg2 = 0000772f9565a280 sprg3 = 0000000000000000
[ 350.613911] cr = 88002848 xer = 0000000020040000 dsisr = 42000000
[ 350.613962] dar = 0000772f95390000
[ 350.614031] fault dar = c000000244b278c0 dsisr = 00000000
[ 350.614073] SLB (0 entries):
[ 350.614157] lpcr = 0040000003d40413 sdr1 = 0000000000000000 last_inst = ffffffff
[ 350.614252] trap=0x1 | pc=0xc00000000013eb98 | msr=0x8000000000009033
followed by L1's QEMU reporting the following before stopping execution
of the nested guest:
KVM: unknown exit, hardware reason 1
NIP c00000000013eb98 LR c0000000004b9044 CTR c0000000004b9000 XER 0000000020040000 CPU#0
MSR 8000000000009033 HID0 0000000000000000 HF 8000000000000000 iidx 3 didx 3
TB 00000000 00000000 DECR 00000000
GPR00 c0000000004b9044 c00000007cffba30 c00000000178c100 c00000007ef52480
GPR04 0000000000000000 70616d00746f6f72 0000000000000020 c0000000783be440
GPR08 fffffffffffffffc c00000007ef52490 0000000000000004 b0616d0009eccdb2
GPR12 c0000000004b9000 c000000001b00000 0000000000000000 0000000000000000
GPR16 0000000000000000 0000000000000000 00007fffc24f3b50 00007fffc24fff58
GPR20 00000a1e96ece9d0 00000a1ea117c9b0 00000a1ea1184360 0000000000000003
GPR24 00000a1e96e9e124 00000000000007ff c00000007eb2f7a0 c00000007cffbb10
GPR28 c00000007d83a2c0 c0000000783cdf68 0000000000000000 c00000007cffbbf0
CR 88002848 [ L L - - E L G L ] RES ffffffffffffffff
SRR0 0000772f954dd48c SRR1 800000000280f033 PVR 00000000004e1202 VRSAVE 0000000000000000
SPRG0 0000000000000000 SPRG1 c000000001b00000 SPRG2 0000772f9565a280 SPRG3 0000000000000000
SPRG4 0000000000000000 SPRG5 0000000000000000 SPRG6 0000000000000000 SPRG7 0000000000000000
HSRR0 0000000000000000 HSRR1 0000000000000000
CFAR 0000000000000000
LPCR 0000000003d40413
PTCR 0000000000000000 DAR 0000772f95390000 DSISR 0000000042000000
Fix this by setting vcpu->arch.hcall_needed = 0 to indicate completion
of H_ENTER_NESTED before we exit to L0 userspace.
Fixes: 360cae3137 ("KVM: PPC: Book3S HV: Nested guest entry via hypercall")
Cc: linuxppc-dev@ozlabs.org
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
When VPHN function is not supported and during cpu hotplug event,
kernel prints message 'VPHN function not supported. Disabling
polling...'. Currently it prints on every hotplug event, it floods
dmesg when a KVM guest tries to hotplug huge number of vcpus, let's
just print once and suppress further kernel prints.
Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Clang needs to be told which target it is building for when cross
compiling.
Link: https://github.com/ClangBuiltLinux/linux/issues/259
Signed-off-by: Joel Stanley <joel@jms.id.au>
Tested-by: Daniel Axtens <dja@axtens.net> # powerpc 64-bit BE
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Back in 2006 Ben added some workarounds for a misbehaviour in the
Spider IO bridge used on early Cell machines, see commit
014da7ff47 ("[POWERPC] Cell "Spider" MMIO workarounds"). Later these
were made to be generic, ie. not tied specifically to Spider.
The code stashes a token in the high bits (59-48) of virtual addresses
used for IO (eg. returned from ioremap()). This works fine when using
the Hash MMU, but when we're using the Radix MMU the bits used for the
token overlap with some of the bits of the virtual address.
This is because the maximum virtual address is larger with Radix, up
to c00fffffffffffff, and in fact we use that high part of the address
range for ioremap(), see RADIX_KERN_IO_START.
As it happens the bits that are used overlap with the bits that
differentiate an IO address vs a linear map address. If the resulting
address lies outside the linear mapping we will crash (see below), if
not we just corrupt memory.
virtio-pci 0000:00:00.0: Using 64-bit direct DMA at offset 800000000000000
Unable to handle kernel paging request for data at address 0xc000000080000014
...
CFAR: c000000000626b98 DAR: c000000080000014 DSISR: 42000000 IRQMASK: 0
GPR00: c0000000006c54fc c00000003e523378 c0000000016de600 0000000000000000
GPR04: c00c000080000014 0000000000000007 0fffffff000affff 0000000000000030
^^^^
...
NIP [c000000000626c5c] .iowrite8+0xec/0x100
LR [c0000000006c992c] .vp_reset+0x2c/0x90
Call Trace:
.pci_bus_read_config_dword+0xc4/0x120 (unreliable)
.register_virtio_device+0x13c/0x1c0
.virtio_pci_probe+0x148/0x1f0
.local_pci_probe+0x68/0x140
.pci_device_probe+0x164/0x220
.really_probe+0x274/0x3b0
.driver_probe_device+0x80/0x170
.__driver_attach+0x14c/0x150
.bus_for_each_dev+0xb8/0x130
.driver_attach+0x34/0x50
.bus_add_driver+0x178/0x2f0
.driver_register+0x90/0x1a0
.__pci_register_driver+0x6c/0x90
.virtio_pci_driver_init+0x2c/0x40
.do_one_initcall+0x64/0x280
.kernel_init_freeable+0x36c/0x474
.kernel_init+0x24/0x160
.ret_from_kernel_thread+0x58/0x7c
This hasn't been a problem because CONFIG_PPC_IO_WORKAROUNDS which
enables this code is usually not enabled. It is only enabled when it's
selected by PPC_CELL_NATIVE which is only selected by
PPC_IBM_CELL_BLADE and that in turn depends on BIG_ENDIAN. So in order
to hit the bug you need to build a big endian kernel, with IBM Cell
Blade support enabled, as well as Radix MMU support, and then boot
that on Power9 using Radix MMU.
Still we can fix the bug, so let's do that. We simply use fewer bits
for the token, taking the union of the restrictions on the address
from both Hash and Radix, we end up with 8 bits we can use for the
token. The only user of the token is iowa_mem_find_bus() which only
supports 8 token values, so 8 bits is plenty for that.
Fixes: 566ca99af0 ("powerpc/mm/radix: Add dummy radix_enabled()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
With preempt enabled we see warnings in do_slb_fault():
BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u33:0/98
futex hash table entries: 4096 (order: 3, 524288 bytes)
caller is do_slb_fault+0x204/0x230
CPU: 5 PID: 98 Comm: kworker/u33:0 Not tainted 4.19.0-rc3-gcc-7.3.1-00022-g1936f094e164 #138
Call Trace:
dump_stack+0xb4/0x104 (unreliable)
check_preemption_disabled+0x148/0x150
do_slb_fault+0x204/0x230
data_access_slb_common+0x138/0x180
This is caused by the get_paca() in slb_allocate_kernel(), which
includes a call to debug_smp_processor_id().
slb_allocate_kernel() can only be called from do_slb_fault(), and in
that path interrupts are hard disabled and so we can't be preempted,
but we can't update the preempt flags (in thread_info) because that
could cause an SLB fault.
So just use local_paca which is safe and doesn't cause the warning.
Fixes: 48e7b76957 ("powerpc/64s/hash: Convert SLB miss handlers to C")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The previous commit, "of: overlay: add missing of_node_get() in
__of_attach_node_sysfs" added a missing of_node_get() to
__of_attach_node_sysfs(). This results in a refcount imbalance
for nodes attached with dlpar_attach_node(). The calling sequence
from dlpar_attach_node() to __of_attach_node_sysfs() is:
dlpar_attach_node()
of_attach_node()
__of_attach_node_sysfs()
For more detailed description of the node refcount, see
commit 68baf692c4 ("powerpc/pseries: Fix of_node_put() underflow
during DLPAR remove").
Tested-by: Alan Tull <atull@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Now that call_rcu()'s callback is not invoked until after all
preempt-disable regions of code have completed (in addition to explicitly
marked RCU read-side critical sections), call_rcu() can be used in place
of call_rcu_sched(). This commit therefore makes that change.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: <linuxppc-dev@lists.ozlabs.org>
TRACE_INCLUDE_PATH and TRACE_INCLUDE_FILE are used by
<trace/define_trace.h>, so like that #include, they should
be outside #ifdef protection.
They also need to be #undefed before defining, in case multiple trace
headers are included by the same C file. This became the case on
book3e after commit cf4a608515 ("powerpc/mm: Add missing tracepoint for
tlbie"), leading to the following build error:
CC arch/powerpc/kvm/powerpc.o
In file included from arch/powerpc/kvm/powerpc.c:51:0:
arch/powerpc/kvm/trace.h:9:0: error: "TRACE_INCLUDE_PATH" redefined
[-Werror]
#define TRACE_INCLUDE_PATH .
^
In file included from arch/powerpc/kvm/../mm/mmu_decl.h:25:0,
from arch/powerpc/kvm/powerpc.c:48:
./arch/powerpc/include/asm/trace.h:224:0: note: this is the location of
the previous definition
#define TRACE_INCLUDE_PATH asm
^
cc1: all warnings being treated as errors
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The slbfee instruction was only added in ISA 2.05 (Power6), it's not
supported on older CPUs. We don't have a CPU feature for that ISA
version though, so just use the ISA 2.06 feature flag.
Fixes: e15a4fea4d ("powerpc/64s/hash: Add some SLB debugging tests")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Old toolchains don't know about slbfee and break the build, eg:
{standard input}:37: Error: Unrecognized opcode: `slbfee.'
Fix it by using the macro version. We need to add an underscore
version that takes raw register numbers from the inline asm, rather
than our Rx macros.
Fixes: e15a4fea4d ("powerpc/64s/hash: Add some SLB debugging tests")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The code for assert_slb_exists() and assert_slb_notexists() is almost
identical, except for the polarity of the WARN_ON(). In a future patch
we'll need to modify this code, so consolidate it now into a single
function.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The NPU IOMMU is setup to mirror the parent PCIe device IOMMU
setup. Therefore it does not make sense to call dma operations such as
dma_map_page(), etc. directly on these devices. The existing dma_ops
simply print a warning if they are ever called, however this is
unnecessary and the warnings are likely to go unnoticed.
It is instead simpler to remove these operations and let the generic
DMA code print warnings (eg. via a NULL pointer deref) in cases of
buggy drivers attempting dma operations on NVLink devices.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Some things that I missed due to travel, or that came in late.
Two fixes also going to stable:
- A revert of a buggy change to the 8xx TLB miss handlers.
- Our flushing of SPE (Signal Processing Engine) registers on fork was broken.
Other changes:
- A change to the KVM decrementer emulation to use proper APIs.
- Some cleanups to the way we do code patching in the 8xx code.
- Expose the maximum possible memory for the system in /proc/powerpc/lparcfg.
- Merge some updates from Scott: "a couple device tree updates, and a fix for a
missing prototype warning."
A few other minor fixes and a handful of fixes for our selftests.
Thanks to:
Aravinda Prasad, Breno Leitao, Camelia Groza, Christophe Leroy, Felipe Rechia,
Joel Stanley, Naveen N. Rao, Paul Mackerras, Scott Wood, Tyrel Datwyler.
-----BEGIN PGP SIGNATURE-----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=VCkW
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some things that I missed due to travel, or that came in late.
Two fixes also going to stable:
- A revert of a buggy change to the 8xx TLB miss handlers.
- Our flushing of SPE (Signal Processing Engine) registers on fork
was broken.
Other changes:
- A change to the KVM decrementer emulation to use proper APIs.
- Some cleanups to the way we do code patching in the 8xx code.
- Expose the maximum possible memory for the system in
/proc/powerpc/lparcfg.
- Merge some updates from Scott: "a couple device tree updates, and a
fix for a missing prototype warning"
A few other minor fixes and a handful of fixes for our selftests.
Thanks to: Aravinda Prasad, Breno Leitao, Camelia Groza, Christophe
Leroy, Felipe Rechia, Joel Stanley, Naveen N. Rao, Paul Mackerras,
Scott Wood, Tyrel Datwyler"
* tag 'powerpc-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (21 commits)
selftests/powerpc: Fix compilation issue due to asm label
selftests/powerpc/cache_shape: Fix out-of-tree build
selftests/powerpc/switch_endian: Fix out-of-tree build
selftests/powerpc/pmu: Link ebb tests with -no-pie
selftests/powerpc/signal: Fix out-of-tree build
selftests/powerpc/ptrace: Fix out-of-tree build
powerpc/xmon: Relax frame size for clang
selftests: powerpc: Fix warning for security subdir
selftests/powerpc: Relax L1d miss targets for rfi_flush test
powerpc/process: Fix flush_all_to_thread for SPE
powerpc/pseries: add missing cpumask.h include file
selftests/powerpc: Fix ptrace tm failure
KVM: PPC: Use exported tb_to_ns() function in decrementer emulation
powerpc/pseries: Export maximum memory value
powerpc/8xx: Use patch_site for perf counters setup
powerpc/8xx: Use patch_site for memory setup patching
powerpc/code-patching: Add a helper to get the address of a patch_site
Revert "powerpc/8xx: Use L1 entry APG to handle _PAGE_ACCESSED for CONFIG_SWAP"
powerpc/8xx: add missing header in 8xx_mmu.c
powerpc/8xx: Add DT node for using the SEC engine of the MPC885
...
Evaluating cc-name invokes the compiler every time even when you are
not compiling anything, like 'make help'. This is not efficient.
The compiler type has been already detected in the Kconfig stage.
Use CONFIG_CC_IS_CLANG, instead.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Paul Burton <paul.burton@mips.com> (MIPS)
Acked-by: Joel Stanley <joel@jms.id.au>
Various powerpc boards select the PCI_MSI config option without selecting
PCI, resulting in potentially not compilable configurations if the by
default enabled PCI option is disabled. Explicitly select PCI to ensure
we always have valid configs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This option isn't actually used anywhere.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Let's perform all checking + offlining + removing under
device_hotplug_lock, so nobody can mess with these devices via sysfs
concurrently.
[david@redhat.com: take device_hotplug_lock outside of loop]
Link: http://lkml.kernel.org/r/20180927092554.13567-6-david@redhat.com
Link: http://lkml.kernel.org/r/20180925091457.28651-6-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Rashmica Gupta <rashmica.g@gmail.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: John Allen <jallen@linux.vnet.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
device_online() should be called with device_hotplug_lock() held.
Link: http://lkml.kernel.org/r/20180925091457.28651-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Rashmica Gupta <rashmica.g@gmail.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: John Allen <jallen@linux.vnet.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
add_memory() currently does not take the device_hotplug_lock, however
is aleady called under the lock from
arch/powerpc/platforms/pseries/hotplug-memory.c
drivers/acpi/acpi_memhotplug.c
to synchronize against CPU hot-remove and similar.
In general, we should hold the device_hotplug_lock when adding memory to
synchronize against online/offline request (e.g. from user space) - which
already resulted in lock inversions due to device_lock() and
mem_hotplug_lock - see 30467e0b3b ("mm, hotplug: fix concurrent memory
hot-add deadlock"). add_memory()/add_memory_resource() will create memory
block devices, so this really feels like the right thing to do.
Holding the device_hotplug_lock makes sure that a memory block device
can really only be accessed (e.g. via .online/.state) from user space,
once the memory has been fully added to the system.
The lock is not held yet in
drivers/xen/balloon.c
arch/powerpc/platforms/powernv/memtrace.c
drivers/s390/char/sclp_cmd.c
drivers/hv/hv_balloon.c
So, let's either use the locked variants or take the lock.
Don't export add_memory_resource(), as it once was exported to be used by
XEN, which is never built as a module. If somebody requires it, we also
have to export a locked variant (as device_hotplug_lock is never
exported).
Link: http://lkml.kernel.org/r/20180925091457.28651-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: John Allen <jallen@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: online/offline_pages called w.o. mem_hotplug_lock", v3.
Reading through the code and studying how mem_hotplug_lock is to be used,
I noticed that there are two places where we can end up calling
device_online()/device_offline() - online_pages()/offline_pages() without
the mem_hotplug_lock. And there are other places where we call
device_online()/device_offline() without the device_hotplug_lock.
While e.g.
echo "online" > /sys/devices/system/memory/memory9/state
is fine, e.g.
echo 1 > /sys/devices/system/memory/memory9/online
Will not take the mem_hotplug_lock. However the device_lock() and
device_hotplug_lock.
E.g. via memory_probe_store(), we can end up calling
add_memory()->online_pages() without the device_hotplug_lock. So we can
have concurrent callers in online_pages(). We e.g. touch in
online_pages() basically unprotected zone->present_pages then.
Looks like there is a longer history to that (see Patch #2 for details),
and fixing it to work the way it was intended is not really possible. We
would e.g. have to take the mem_hotplug_lock in device/base/core.c, which
sounds wrong.
Summary: We had a lock inversion on mem_hotplug_lock and device_lock().
More details can be found in patch 3 and patch 6.
I propose the general rules (documentation added in patch 6):
1. add_memory/add_memory_resource() must only be called with
device_hotplug_lock.
2. remove_memory() must only be called with device_hotplug_lock. This is
already documented and holds for all callers.
3. device_online()/device_offline() must only be called with
device_hotplug_lock. This is already documented and true for now in core
code. Other callers (related to memory hotplug) have to be fixed up.
4. mem_hotplug_lock is taken inside of add_memory/remove_memory/
online_pages/offline_pages.
To me, this looks way cleaner than what we have right now (and easier to
verify). And looking at the documentation of remove_memory, using
lock_device_hotplug also for add_memory() feels natural.
This patch (of 6):
remove_memory() is exported right now but requires the
device_hotplug_lock, which is not exported. So let's provide a variant
that takes the lock and only export that one.
The lock is already held in
arch/powerpc/platforms/pseries/hotplug-memory.c
drivers/acpi/acpi_memhotplug.c
arch/powerpc/platforms/powernv/memtrace.c
Apart from that, there are not other users in the tree.
Link: http://lkml.kernel.org/r/20180925091457.28651-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Rashmica Gupta <rashmica.g@gmail.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: John Allen <jallen@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a memblock allocation APIs are called with align = 0, the alignment
is implicitly set to SMP_CACHE_BYTES.
Implicit alignment is done deep in the memblock allocator and it can
come as a surprise. Not that such an alignment would be wrong even
when used incorrectly but it is better to be explicit for the sake of
clarity and the prinicple of the least surprise.
Replace all such uses of memblock APIs with the 'align' parameter
explicitly set to SMP_CACHE_BYTES and stop implicit alignment assignment
in the memblock internal allocation functions.
For the case when memblock APIs are used via helper functions, e.g. like
iommu_arena_new_node() in Alpha, the helper functions were detected with
Coccinelle's help and then manually examined and updated where
appropriate.
The direct memblock APIs users were updated using the semantic patch below:
@@
expression size, min_addr, max_addr, nid;
@@
(
|
- memblock_alloc_try_nid_raw(size, 0, min_addr, max_addr, nid)
+ memblock_alloc_try_nid_raw(size, SMP_CACHE_BYTES, min_addr, max_addr,
nid)
|
- memblock_alloc_try_nid_nopanic(size, 0, min_addr, max_addr, nid)
+ memblock_alloc_try_nid_nopanic(size, SMP_CACHE_BYTES, min_addr, max_addr,
nid)
|
- memblock_alloc_try_nid(size, 0, min_addr, max_addr, nid)
+ memblock_alloc_try_nid(size, SMP_CACHE_BYTES, min_addr, max_addr, nid)
|
- memblock_alloc(size, 0)
+ memblock_alloc(size, SMP_CACHE_BYTES)
|
- memblock_alloc_raw(size, 0)
+ memblock_alloc_raw(size, SMP_CACHE_BYTES)
|
- memblock_alloc_from(size, 0, min_addr)
+ memblock_alloc_from(size, SMP_CACHE_BYTES, min_addr)
|
- memblock_alloc_nopanic(size, 0)
+ memblock_alloc_nopanic(size, SMP_CACHE_BYTES)
|
- memblock_alloc_low(size, 0)
+ memblock_alloc_low(size, SMP_CACHE_BYTES)
|
- memblock_alloc_low_nopanic(size, 0)
+ memblock_alloc_low_nopanic(size, SMP_CACHE_BYTES)
|
- memblock_alloc_from_nopanic(size, 0, min_addr)
+ memblock_alloc_from_nopanic(size, SMP_CACHE_BYTES, min_addr)
|
- memblock_alloc_node(size, 0, nid)
+ memblock_alloc_node(size, SMP_CACHE_BYTES, nid)
)
[mhocko@suse.com: changelog update]
[akpm@linux-foundation.org: coding-style fixes]
[rppt@linux.ibm.com: fix missed uses of implicit alignment]
Link: http://lkml.kernel.org/r/20181016133656.GA10925@rapoport-lnx
Link: http://lkml.kernel.org/r/1538687224-17535-1-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.
The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>
@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>
[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make it explicit that the caller gets a physical address rather than a
virtual one.
This will also allow using meblock_alloc prefix for memblock allocations
returning virtual address, which is done in the following patches.
The conversion is done using the following semantic patch:
@@
expression e1, e2, e3;
@@
(
- memblock_alloc(e1, e2)
+ memblock_phys_alloc(e1, e2)
|
- memblock_alloc_nid(e1, e2, e3)
+ memblock_phys_alloc_nid(e1, e2, e3)
|
- memblock_alloc_try_nid(e1, e2, e3)
+ memblock_phys_alloc_try_nid(e1, e2, e3)
)
Link: http://lkml.kernel.org/r/1536927045-23536-7-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All architecures use memblock for early memory management. There is no need
for the CONFIG_HAVE_MEMBLOCK configuration option.
[rppt@linux.vnet.ibm.com: of/fdt: fixup #ifdefs]
Link: http://lkml.kernel.org/r/20180919103457.GA20545@rapoport-lnx
[rppt@linux.vnet.ibm.com: csky: fixups after bootmem removal]
Link: http://lkml.kernel.org/r/20180926112744.GC4628@rapoport-lnx
[rppt@linux.vnet.ibm.com: remove stale #else and the code it protects]
Link: http://lkml.kernel.org/r/1538067825-24835-1-git-send-email-rppt@linux.vnet.ibm.com
Link: http://lkml.kernel.org/r/1536927045-23536-4-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Tested-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All achitectures select NO_BOOTMEM which essentially becomes 'Y' for any
kernel configuration and therefore it can be removed.
[alexander.h.duyck@linux.intel.com: remove now defunct NO_BOOTMEM from depends list for deferred init]
Link: http://lkml.kernel.org/r/20180925201814.3576.15105.stgit@localhost.localdomain
Link: http://lkml.kernel.org/r/1536927045-23536-3-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Prefer _THIS_IP_ defined in linux/kernel.h.
Most definitions of current_text_addr were the same as _THIS_IP_, but
a few archs had inline assembly instead.
This patch removes the final call site of current_text_addr, making all
of the definitions dead code.
[akpm@linux-foundation.org: fix arch/csky/include/asm/processor.h]
Link: http://lkml.kernel.org/r/20180911182413.180715-1-ndesaulniers@google.com
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When building with clang (8 trunk, 7.0 release) the frame size limit is
hit:
arch/powerpc/xmon/xmon.c:452:12: warning: stack frame size of 2576
bytes in function 'xmon_core' [-Wframe-larger-than=]
Some investigation by Naveen indicates this is due to clang saving the
addresses to printf format strings on the stack.
While this issue is investigated, bump up the frame size limit for xmon
when building with clang.
Link: https://github.com/ClangBuiltLinux/linux/issues/252
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Here is the big tty and serial pull request for 4.20-rc1
Lots of little things here, including a merge from the SPI tree in order
to keep things simpler for everyone to sync around for one platform.
Major stuff is:
- tty buffer clearing after use
- atmel_serial fixes and additions
- xilinx uart driver updates
and of course, lots of tiny fixes and additions to individual serial
drivers.
All of these have been in linux-next with no reported issues for a
while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW9bW0w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymYhgCfbxr0T+4lF/rpGxNXNnV4u5boRJUAn2L8R+1y
URbAWHvKfaby2AVfQ1z0
=qTHH
-----END PGP SIGNATURE-----
Merge tag 'tty-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the big tty and serial pull request for 4.20-rc1
Lots of little things here, including a merge from the SPI tree in
order to keep things simpler for everyone to sync around for one
platform.
Major stuff is:
- tty buffer clearing after use
- atmel_serial fixes and additions
- xilinx uart driver updates
and of course, lots of tiny fixes and additions to individual serial
drivers.
All of these have been in linux-next with no reported issues for a
while"
* tag 'tty-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (66 commits)
of: base: Change logic in of_alias_get_alias_list()
of: base: Fix english spelling in of_alias_get_alias_list()
serial: sh-sci: do not warn if DMA transfers are not supported
serial: uartps: Do not allow use aliases >= MAX_UART_INSTANCES
tty: check name length in tty_find_polling_driver()
serial: sh-sci: Add r8a77990 support
tty: wipe buffer if not echoing data
tty: wipe buffer.
serial: fsl_lpuart: Remove the alias node dependence
TTY: sn_console: Replace spin_is_locked() with spin_trylock()
Revert "serial:serial_core: Allow use of CTS for PPS line discipline"
serial: 8250_uniphier: add auto-flow-control support
serial: 8250_uniphier: flatten probe function
serial: 8250_uniphier: remove unused "fifo-size" property
dt-bindings: serial: sh-sci: Document r8a7744 bindings
serial: uartps: Fix missing unlock on error in cdns_get_id()
tty/serial: atmel: add ISO7816 support
tty/serial_core: add ISO7816 infrastructure
serial:serial_core: Allow use of CTS for PPS line discipline
serial: docs: Fix filename for serial reference implementation
...
Pull XArray conversion from Matthew Wilcox:
"The XArray provides an improved interface to the radix tree data
structure, providing locking as part of the API, specifying GFP flags
at allocation time, eliminating preloading, less re-walking the tree,
more efficient iterations and not exposing RCU-protected pointers to
its users.
This patch set
1. Introduces the XArray implementation
2. Converts the pagecache to use it
3. Converts memremap to use it
The page cache is the most complex and important user of the radix
tree, so converting it was most important. Converting the memremap
code removes the only other user of the multiorder code, which allows
us to remove the radix tree code that supported it.
I have 40+ followup patches to convert many other users of the radix
tree over to the XArray, but I'd like to get this part in first. The
other conversions haven't been in linux-next and aren't suitable for
applying yet, but you can see them in the xarray-conv branch if you're
interested"
* 'xarray' of git://git.infradead.org/users/willy/linux-dax: (90 commits)
radix tree: Remove multiorder support
radix tree test: Convert multiorder tests to XArray
radix tree tests: Convert item_delete_rcu to XArray
radix tree tests: Convert item_kill_tree to XArray
radix tree tests: Move item_insert_order
radix tree test suite: Remove multiorder benchmarking
radix tree test suite: Remove __item_insert
memremap: Convert to XArray
xarray: Add range store functionality
xarray: Move multiorder_check to in-kernel tests
xarray: Move multiorder_shrink to kernel tests
xarray: Move multiorder account test in-kernel
radix tree test suite: Convert iteration test to XArray
radix tree test suite: Convert tag_tagged_items to XArray
radix tree: Remove radix_tree_clear_tags
radix tree: Remove radix_tree_maybe_preload_order
radix tree: Remove split/join code
radix tree: Remove radix_tree_update_node_t
page cache: Finish XArray conversion
dax: Convert page fault handlers to XArray
...
Merge updates from Andrew Morton:
- a few misc things
- ocfs2 updates
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (132 commits)
hugetlbfs: dirty pages as they are added to pagecache
mm: export add_swap_extent()
mm: split SWP_FILE into SWP_ACTIVATED and SWP_FS
tools/testing/selftests/vm/map_fixed_noreplace.c: add test for MAP_FIXED_NOREPLACE
mm: thp: relocate flush_cache_range() in migrate_misplaced_transhuge_page()
mm: thp: fix mmu_notifier in migrate_misplaced_transhuge_page()
mm: thp: fix MADV_DONTNEED vs migrate_misplaced_transhuge_page race condition
mm/kasan/quarantine.c: make quarantine_lock a raw_spinlock_t
mm/gup: cache dev_pagemap while pinning pages
Revert "x86/e820: put !E820_TYPE_RAM regions into memblock.reserved"
mm: return zero_resv_unavail optimization
mm: zero remaining unavailable struct pages
tools/testing/selftests/vm/gup_benchmark.c: add MAP_HUGETLB option
tools/testing/selftests/vm/gup_benchmark.c: add MAP_SHARED option
tools/testing/selftests/vm/gup_benchmark.c: allow user specified file
tools/testing/selftests/vm/gup_benchmark.c: fix 'write' flag usage
mm/gup_benchmark.c: add additional pinning methods
mm/gup_benchmark.c: time put_page()
mm: don't raise MEMCG_OOM event due to failed high-order allocation
mm/page-writeback.c: fix range_cyclic writeback vs writepages deadlock
...
ia64, mips, parisc, powerpc, sh, sparc, x86 architectures use the same
version of huge_ptep_get, so move this generic implementation into
asm-generic/hugetlb.h.
[arnd@arndb.de: fix ARM 3level page tables]
Link: http://lkml.kernel.org/r/20181005161722.904274-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/20180920060358.16606-12-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Ingo Molnar <mingo@kernel.org> [x86]
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arm, ia64, sh, x86 architectures use the same version
of huge_ptep_set_access_flags, so move this generic implementation
into asm-generic/hugetlb.h.
Link: http://lkml.kernel.org/r/20180920060358.16606-11-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Ingo Molnar <mingo@kernel.org> [x86]
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arm, ia64, mips, powerpc, sh, x86 architectures use the same version of
huge_ptep_set_wrprotect, so move this generic implementation into
asm-generic/hugetlb.h.
Link: http://lkml.kernel.org/r/20180920060358.16606-10-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Ingo Molnar <mingo@kernel.org> [x86]
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arm, arm64, powerpc, sparc, x86 architectures use the same version of
prepare_hugepage_range, so move this generic implementation into
asm-generic/hugetlb.h.
Link: http://lkml.kernel.org/r/20180920060358.16606-9-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Ingo Molnar <mingo@kernel.org> [x86]
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arm, arm64, ia64, mips, parisc, powerpc, sh, sparc, x86 architectures use
the same version of huge_pte_wrprotect, so move this generic
implementation into asm-generic/hugetlb.h.
Link: http://lkml.kernel.org/r/20180920060358.16606-8-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Ingo Molnar <mingo@kernel.org> [x86]
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arm, arm64, ia64, mips, parisc, powerpc, sh, sparc, x86 architectures use
the same version of huge_pte_none, so move this generic implementation
into asm-generic/hugetlb.h.
Link: http://lkml.kernel.org/r/20180920060358.16606-7-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Ingo Molnar <mingo@kernel.org> [x86]
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arm, x86 architectures use the same version of huge_ptep_clear_flush, so
move this generic implementation into asm-generic/hugetlb.h.
Link: http://lkml.kernel.org/r/20180920060358.16606-6-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Ingo Molnar <mingo@kernel.org> [x86]
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arm, ia64, sh, x86 architectures use the same version of
huge_ptep_get_and_clear, so move this generic implementation into
asm-generic/hugetlb.h.
Link: http://lkml.kernel.org/r/20180920060358.16606-5-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Ingo Molnar <mingo@kernel.org> [x86]
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arm, ia64, mips, powerpc, sh, x86 architectures use the same version of
set_huge_pte_at, so move this generic implementation into
asm-generic/hugetlb.h.
Link: http://lkml.kernel.org/r/20180920060358.16606-4-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Ingo Molnar <mingo@kernel.org> [x86]
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arm, arm64, mips, parisc, sh, x86 architectures use the same version of
hugetlb_free_pgd_range, so move this generic implementation into
asm-generic/hugetlb.h.
Link: http://lkml.kernel.org/r/20180920060358.16606-3-alex@ghiti.fr
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Tested-by: Helge Deller <deller@gmx.de> [parisc]
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Ingo Molnar <mingo@kernel.org> [x86]
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are several definitions of those functions/macros in places that
mess with fixed-point load averages. Provide an official version.
[akpm@linux-foundation.org: fix missed conversion in block/blk-iolatency.c]
Link: http://lkml.kernel.org/r/20180828172258.3185-5-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Tested-by: Daniel Drake <drake@endlessm.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <jweiner@fb.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Enderborg <peter.enderborg@sony.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Notable changes:
- A large series to rewrite our SLB miss handling, replacing a lot of fairly
complicated asm with much fewer lines of C.
- Following on from that, we now maintain a cache of SLB entries for each
process and preload them on context switch. Leading to a 27% speedup for our
context switch benchmark on Power9.
- Improvements to our handling of SLB multi-hit errors. We now print more debug
information when they occur, and try to continue running by flushing the SLB
and reloading, rather than treating them as fatal.
- Enable THP migration on 64-bit Book3S machines (eg. Power7/8/9).
- Add support for physical memory up to 2PB in the linear mapping on 64-bit
Book3S. We only support up to 512TB as regular system memory, otherwise the
percpu allocator runs out of vmalloc space.
- Add stack protector support for 32 and 64-bit, with a per-task canary.
- Add support for PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP.
- Support recognising "big cores" on Power9, where two SMT4 cores are presented
to us as a single SMT8 core.
- A large series to cleanup some of our ioremap handling and PTE flags.
- Add a driver for the PAPR SCM (storage class memory) interface, allowing
guests to operate on SCM devices (acked by Dan).
- Changes to our ftrace code to handle very large kernels, where we need to use
a trampoline to get to ftrace_caller().
Many other smaller enhancements and cleanups.
Thanks to:
Alan Modra, Alistair Popple, Aneesh Kumar K.V, Anton Blanchard, Aravinda
Prasad, Bartlomiej Zolnierkiewicz, Benjamin Herrenschmidt, Breno Leitao,
Cédric Le Goater, Christophe Leroy, Christophe Lombard, Dan Carpenter, Daniel
Axtens, Finn Thain, Gautham R. Shenoy, Gustavo Romero, Haren Myneni, Hari
Bathini, Jia Hongtao, Joel Stanley, John Allen, Laurent Dufour, Madhavan
Srinivasan, Mahesh Salgaonkar, Mark Hairgrove, Masahiro Yamada, Michael
Bringmann, Michael Neuling, Michal Suchanek, Murilo Opsfelder Araujo, Nathan
Fontenot, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran,
Paul Mackerras, Petr Vorel, Rashmica Gupta, Reza Arbab, Rob Herring, Sam
Bobroff, Samuel Mendoza-Jonas, Scott Wood, Stan Johnson, Stephen Rothwell,
Stewart Smith, Suraj Jitindar Singh, Tyrel Datwyler, Vaibhav Jain, Vasant
Hegde, YueHaibing, zhong jiang,
-----BEGIN PGP SIGNATURE-----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=I0pj
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- A large series to rewrite our SLB miss handling, replacing a lot of
fairly complicated asm with much fewer lines of C.
- Following on from that, we now maintain a cache of SLB entries for
each process and preload them on context switch. Leading to a 27%
speedup for our context switch benchmark on Power9.
- Improvements to our handling of SLB multi-hit errors. We now print
more debug information when they occur, and try to continue running
by flushing the SLB and reloading, rather than treating them as
fatal.
- Enable THP migration on 64-bit Book3S machines (eg. Power7/8/9).
- Add support for physical memory up to 2PB in the linear mapping on
64-bit Book3S. We only support up to 512TB as regular system
memory, otherwise the percpu allocator runs out of vmalloc space.
- Add stack protector support for 32 and 64-bit, with a per-task
canary.
- Add support for PTRACE_SYSEMU and PTRACE_SYSEMU_SINGLESTEP.
- Support recognising "big cores" on Power9, where two SMT4 cores are
presented to us as a single SMT8 core.
- A large series to cleanup some of our ioremap handling and PTE
flags.
- Add a driver for the PAPR SCM (storage class memory) interface,
allowing guests to operate on SCM devices (acked by Dan).
- Changes to our ftrace code to handle very large kernels, where we
need to use a trampoline to get to ftrace_caller().
And many other smaller enhancements and cleanups.
Thanks to: Alan Modra, Alistair Popple, Aneesh Kumar K.V, Anton
Blanchard, Aravinda Prasad, Bartlomiej Zolnierkiewicz, Benjamin
Herrenschmidt, Breno Leitao, Cédric Le Goater, Christophe Leroy,
Christophe Lombard, Dan Carpenter, Daniel Axtens, Finn Thain, Gautham
R. Shenoy, Gustavo Romero, Haren Myneni, Hari Bathini, Jia Hongtao,
Joel Stanley, John Allen, Laurent Dufour, Madhavan Srinivasan, Mahesh
Salgaonkar, Mark Hairgrove, Masahiro Yamada, Michael Bringmann,
Michael Neuling, Michal Suchanek, Murilo Opsfelder Araujo, Nathan
Fontenot, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Oliver
O'Halloran, Paul Mackerras, Petr Vorel, Rashmica Gupta, Reza Arbab,
Rob Herring, Sam Bobroff, Samuel Mendoza-Jonas, Scott Wood, Stan
Johnson, Stephen Rothwell, Stewart Smith, Suraj Jitindar Singh, Tyrel
Datwyler, Vaibhav Jain, Vasant Hegde, YueHaibing, zhong jiang"
* tag 'powerpc-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (221 commits)
Revert "selftests/powerpc: Fix out-of-tree build errors"
powerpc/msi: Fix compile error on mpc83xx
powerpc: Fix stack protector crashes on CPU hotplug
powerpc/traps: restore recoverability of machine_check interrupts
powerpc/64/module: REL32 relocation range check
powerpc/64s/radix: Fix radix__flush_tlb_collapsed_pmd double flushing pmd
selftests/powerpc: Add a test of wild bctr
powerpc/mm: Fix page table dump to work on Radix
powerpc/mm/radix: Display if mappings are exec or not
powerpc/mm/radix: Simplify split mapping logic
powerpc/mm/radix: Remove the retry in the split mapping logic
powerpc/mm/radix: Fix small page at boundary when splitting
powerpc/mm/radix: Fix overuse of small pages in splitting logic
powerpc/mm/radix: Fix off-by-one in split mapping logic
powerpc/ftrace: Handle large kernel configs
powerpc/mm: Fix WARN_ON with THP NUMA migration
selftests/powerpc: Fix out-of-tree build errors
powerpc/time: no steal_time when CONFIG_PPC_SPLPAR is not selected
powerpc/time: Only set CONFIG_ARCH_HAS_SCALED_CPUTIME on PPC64
powerpc/time: isolate scaled cputime accounting in dedicated functions.
...
- Sync dtc with upstream version v1.4.7-14-gc86da84d30e4
- Work to get rid of direct accesses to struct device_node name and
type pointers in preparation for removing them. New helpers for
parsing DT cpu nodes and conversions to use the helpers. printk
conversions to %pOFn for printing DT node names. Most went thru
subystem trees, so this is the remainder.
- Fixes to DT child node lookups to actually be restricted to child
nodes instead of treewide.
- Refactoring of dtb targets out of arch code. This makes the support
more uniform and enables building all dtbs on c6x, microblaze, and
powerpc.
- Various DT binding updates for Renesas r8a7744 SoC
- Vendor prefixes for Facebook, OLPC
- Restructuring of some ARM binding docs moving some peripheral bindings
out of board/SoC binding files
- New "secure-chosen" binding for secure world settings on ARM
- Dual licensing of 2 DT IRQ binding headers
-----BEGIN PGP SIGNATURE-----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=335v
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree updates from Rob Herring:
"A bit bigger than normal as I've been busy this cycle.
There's a few things with dependencies and a few things subsystem
maintainers didn't pick up, so I'm taking them thru my tree.
The fixes from Johan didn't get into linux-next, but they've been
waiting for some time now and they are what's left of what subsystem
maintainers didn't pick up.
Summary:
- Sync dtc with upstream version v1.4.7-14-gc86da84d30e4
- Work to get rid of direct accesses to struct device_node name and
type pointers in preparation for removing them. New helpers for
parsing DT cpu nodes and conversions to use the helpers. printk
conversions to %pOFn for printing DT node names. Most went thru
subystem trees, so this is the remainder.
- Fixes to DT child node lookups to actually be restricted to child
nodes instead of treewide.
- Refactoring of dtb targets out of arch code. This makes the support
more uniform and enables building all dtbs on c6x, microblaze, and
powerpc.
- Various DT binding updates for Renesas r8a7744 SoC
- Vendor prefixes for Facebook, OLPC
- Restructuring of some ARM binding docs moving some peripheral
bindings out of board/SoC binding files
- New "secure-chosen" binding for secure world settings on ARM
- Dual licensing of 2 DT IRQ binding headers"
* tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits)
ARM: dt: relicense two DT binding IRQ headers
power: supply: twl4030-charger: fix OF sibling-node lookup
NFC: nfcmrvl_uart: fix OF child-node lookup
net: stmmac: dwmac-sun8i: fix OF child-node lookup
net: bcmgenet: fix OF child-node lookup
drm/msm: fix OF child-node lookup
drm/mediatek: fix OF sibling-node lookup
of: Add missing exports of node name compare functions
dt-bindings: Add OLPC vendor prefix
dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus
dt-bindings: thermal: samsung: Add SPDX license identifier
dt-bindings: clock: samsung: Add SPDX license identifiers
dt-bindings: timer: ostm: Add R7S9210 support
dt-bindings: phy: rcar-gen2: Add r8a7744 support
dt-bindings: can: rcar_can: Add r8a7744 support
dt-bindings: timer: renesas, cmt: Document r8a7744 CMT support
dt-bindings: watchdog: renesas-wdt: Document r8a7744 support
dt-bindings: thermal: rcar: Add device tree support for r8a7744
Documentation: dt: Add binding for /secure-chosen/stdout-path
dt-bindings: arm: zte: Move sysctrl bindings to their own doc
...
- various swiotlb cleanups
- do not dip into the ѕwiotlb pool for dma coherent allocations
- add support for not cache coherent DMA to swiotlb
- switch ARM64 to use the generic swiotlb_dma_ops
-----BEGIN PGP SIGNATURE-----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=pI5p
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.20-1' of git://git.infradead.org/users/hch/dma-mapping
Pull more dma-mapping updates from Christoph Hellwig:
- various swiotlb cleanups
- do not dip into the ѕwiotlb pool for dma coherent allocations
- add support for not cache coherent DMA to swiotlb
- switch ARM64 to use the generic swiotlb_dma_ops
* tag 'dma-mapping-4.20-1' of git://git.infradead.org/users/hch/dma-mapping:
arm64: use the generic swiotlb_dma_ops
swiotlb: add support for non-coherent DMA
swiotlb: don't dip into swiotlb pool for coherent allocations
swiotlb: refactor swiotlb_map_page
swiotlb: use swiotlb_map_page in swiotlb_map_sg_attrs
swiotlb: merge swiotlb_unmap_page and unmap_single
swiotlb: remove the overflow buffer
swiotlb: do not panic on mapping failures
swiotlb: mark is_swiotlb_buffer static
swiotlb: remove a pointless comment
Fix a bug introduced by the creation of flush_all_to_thread() for
processors that have SPE (Signal Processing Engine) and use it to
compute floating-point operations.
>From userspace perspective, the problem was seen in attempts of
computing floating-point operations which should generate exceptions.
For example:
fork();
float x = 0.0 / 0.0;
isnan(x); // forked process returns False (should be True)
The operation above also should always cause the SPEFSCR FINV bit to
be set. However, the SPE floating-point exceptions were turned off
after a fork().
Kernel versions prior to the bug used flush_spe_to_thread(), which
first saves SPEFSCR register values in tsk->thread and then calls
giveup_spe(tsk).
After commit 579e633e76, the save_all() function was called first
to giveup_spe(), and then the SPEFSCR register values were saved in
tsk->thread. This would save the SPEFSCR register values after
disabling SPE for that thread, causing the bug described above.
Fixes 579e633e76 ("powerpc: create flush_all_to_thread()")
Signed-off-by: Felipe Rechia <felipe.rechia@datacom.com.br>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Build error is encountered when inlcuding <asm/rtas.h> if no explicit or
implicit include of cpumask.h exists in the including file.
In file included from arch/powerpc/platforms/pseries/hotplug-pci.c:3:0:
./arch/powerpc/include/asm/rtas.h:360:34: error: unknown type name 'cpumask_var_t'
extern int rtas_online_cpus_mask(cpumask_var_t cpus);
^
./arch/powerpc/include/asm/rtas.h:361:35: error: unknown type name 'cpumask_var_t'
extern int rtas_offline_cpus_mask(cpumask_var_t cpus);
Fixes: 120496ac2d ("powerpc: Bring all threads online prior to migration/hibernation")
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This changes the KVM code that emulates the decrementer function to do
the conversion of decrementer values to time intervals in nanoseconds
by calling the tb_to_ns() function exported by the powerpc timer code,
in preference to open-coded arithmetic using values from the
decrementer_clockevent struct. Similarly, the HV-KVM code that did
the same conversion using arithmetic on tb_ticks_per_sec also now
uses tb_to_ns().
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch exports the maximum possible amount of memory
configured on the system via /proc/powerpc/lparcfg.
Signed-off-by: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The 8xx TLB miss routines are patched when (de)activating
perf counters.
This patch uses the new patch_site functionality in order
to get a better code readability and avoid a label mess when
dumping the code with 'objdump -d'
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The 8xx TLB miss routines are patched at startup at several places.
This patch uses the new patch_site functionality in order
to get a better code readability and avoid a label mess when
dumping the code with 'objdump -d'
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds a helper to get the address of a patch_site.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Call it "patch site" addr]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This reverts commit 4f94b2c746.
That commit was buggy, as it used rlwinm instead of rlwimi.
Instead of fixing that bug, we revert the previous commit in order to
reduce the dependency between L1 entries and L2 entries
Fixes: 4f94b2c746 ("powerpc/8xx: Use L1 entry APG to handle _PAGE_ACCESSED for CONFIG_SWAP")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
ARM:
- Improved guest IPA space support (32 to 52 bits)
- RAS event delivery for 32bit
- PMU fixes
- Guest entry hardening
- Various cleanups
- Port of dirty_log_test selftest
PPC:
- Nested HV KVM support for radix guests on POWER9. The performance is
much better than with PR KVM. Migration and arbitrary level of
nesting is supported.
- Disable nested HV-KVM on early POWER9 chips that need a particular hardware
bug workaround
- One VM per core mode to prevent potential data leaks
- PCI pass-through optimization
- merge ppc-kvm topic branch and kvm-ppc-fixes to get a better base
s390:
- Initial version of AP crypto virtualization via vfio-mdev
- Improvement for vfio-ap
- Set the host program identifier
- Optimize page table locking
x86:
- Enable nested virtualization by default
- Implement Hyper-V IPI hypercalls
- Improve #PF and #DB handling
- Allow guests to use Enlightened VMCS
- Add migration selftests for VMCS and Enlightened VMCS
- Allow coalesced PIO accesses
- Add an option to perform nested VMCS host state consistency check
through hardware
- Automatic tuning of lapic_timer_advance_ns
- Many fixes, minor improvements, and cleanups
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJb0FINAAoJEED/6hsPKofoI60IAJRS3vOAQ9Fav8cJsO1oBHcX
3+NexfnBke1bzrjIR3SUcHKGZbdnVPNZc+Q4JjIbPpPmmOMU5jc9BC1dmd5f4Vzh
BMnQ0yCvgFv3A3fy/Icx1Z8NJppxosdmqdQLrQrNo8aD3cjnqY2yQixdXrAfzLzw
XEgKdIFCCz8oVN/C9TT4wwJn6l9OE7BM5bMKGFy5VNXzMu7t64UDOLbbjZxNgi1g
teYvfVGdt5mH0N7b2GPPWRbJmgnz5ygVVpVNQUEFrdKZoCm6r5u9d19N+RRXAwan
ZYFj10W2T8pJOUf3tryev4V33X7MRQitfJBo4tP5hZfi9uRX89np5zP1CFE7AtY=
=yEPW
-----END PGP SIGNATURE-----
Merge tag 'kvm-4.20-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Radim Krčmář:
"ARM:
- Improved guest IPA space support (32 to 52 bits)
- RAS event delivery for 32bit
- PMU fixes
- Guest entry hardening
- Various cleanups
- Port of dirty_log_test selftest
PPC:
- Nested HV KVM support for radix guests on POWER9. The performance
is much better than with PR KVM. Migration and arbitrary level of
nesting is supported.
- Disable nested HV-KVM on early POWER9 chips that need a particular
hardware bug workaround
- One VM per core mode to prevent potential data leaks
- PCI pass-through optimization
- merge ppc-kvm topic branch and kvm-ppc-fixes to get a better base
s390:
- Initial version of AP crypto virtualization via vfio-mdev
- Improvement for vfio-ap
- Set the host program identifier
- Optimize page table locking
x86:
- Enable nested virtualization by default
- Implement Hyper-V IPI hypercalls
- Improve #PF and #DB handling
- Allow guests to use Enlightened VMCS
- Add migration selftests for VMCS and Enlightened VMCS
- Allow coalesced PIO accesses
- Add an option to perform nested VMCS host state consistency check
through hardware
- Automatic tuning of lapic_timer_advance_ns
- Many fixes, minor improvements, and cleanups"
* tag 'kvm-4.20-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
KVM/nVMX: Do not validate that posted_intr_desc_addr is page aligned
Revert "kvm: x86: optimize dr6 restore"
KVM: PPC: Optimize clearing TCEs for sparse tables
x86/kvm/nVMX: tweak shadow fields
selftests/kvm: add missing executables to .gitignore
KVM: arm64: Safety check PSTATE when entering guest and handle IL
KVM: PPC: Book3S HV: Don't use streamlined entry path on early POWER9 chips
arm/arm64: KVM: Enable 32 bits kvm vcpu events support
arm/arm64: KVM: Rename function kvm_arch_dev_ioctl_check_extension()
KVM: arm64: Fix caching of host MDCR_EL2 value
KVM: VMX: enable nested virtualization by default
KVM/x86: Use 32bit xor to clear registers in svm.c
kvm: x86: Introduce KVM_CAP_EXCEPTION_PAYLOAD
kvm: vmx: Defer setting of DR6 until #DB delivery
kvm: x86: Defer setting of CR2 until #PF delivery
kvm: x86: Add payload operands to kvm_multiple_exception
kvm: x86: Add exception payload fields to kvm_vcpu_events
kvm: x86: Add has_payload and payload to kvm_queued_exception
KVM: Documentation: Fix omission in struct kvm_vcpu_events
KVM: selftests: add Enlightened VMCS test
...
Pull timekeeping updates from Thomas Gleixner:
"The timers and timekeeping departement provides:
- Another large y2038 update with further preparations for providing
the y2038 safe timespecs closer to the syscalls.
- An overhaul of the SHCMT clocksource driver
- SPDX license identifier updates
- Small cleanups and fixes all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
tick/sched : Remove redundant cpu_online() check
clocksource/drivers/dw_apb: Add reset control
clocksource: Remove obsolete CLOCKSOURCE_OF_DECLARE
clocksource/drivers: Unify the names to timer-* format
clocksource/drivers/sh_cmt: Add R-Car gen3 support
dt-bindings: timer: renesas: cmt: document R-Car gen3 support
clocksource/drivers/sh_cmt: Properly line-wrap sh_cmt_of_table[] initializer
clocksource/drivers/sh_cmt: Fix clocksource width for 32-bit machines
clocksource/drivers/sh_cmt: Fixup for 64-bit machines
clocksource/drivers/sh_tmu: Convert to SPDX identifiers
clocksource/drivers/sh_mtu2: Convert to SPDX identifiers
clocksource/drivers/sh_cmt: Convert to SPDX identifiers
clocksource/drivers/renesas-ostm: Convert to SPDX identifiers
clocksource: Convert to using %pOFn instead of device_node.name
tick/broadcast: Remove redundant check
RISC-V: Request newstat syscalls
y2038: signal: Change rt_sigtimedwait to use __kernel_timespec
y2038: socket: Change recvmmsg to use __kernel_timespec
y2038: sched: Change sched_rr_get_interval to use __kernel_timespec
y2038: utimes: Rework #ifdef guards for compat syscalls
...
-----BEGIN PGP SIGNATURE-----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=58I4
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- Fix ASPM link_state teardown on removal (Lukas Wunner)
- Fix misleading _OSC ASPM message (Sinan Kaya)
- Make _OSC optional for PCI (Sinan Kaya)
- Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set
(Patrick Talbert)
- Remove x86 and arm64 node-local allocation for host bridge structures
(Punit Agrawal)
- Pay attention to device-specific _PXM node values (Jonathan Cameron)
- Support new Immediate Readiness bit (Felipe Balbi)
- Differentiate between pciehp surprise and safe removal (Lukas Wunner)
- Remove unnecessary pciehp includes (Lukas Wunner)
- Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner)
- Tolerate PCIe Slot Presence Detect being hardwired to zero to
workaround broken hardware, e.g., the Wilocity switch/wireless device
(Lukas Wunner)
- Unify pciehp controller & slot structs (Lukas Wunner)
- Constify hotplug_slot_ops (Lukas Wunner)
- Drop hotplug_slot_info (Lukas Wunner)
- Embed hotplug_slot struct into users instead of allocating it
separately (Lukas Wunner)
- Initialize PCIe port service drivers directly instead of relying on
initcall ordering (Keith Busch)
- Restore PCI config state after a slot reset (Keith Busch)
- Save/restore DPC config state along with other PCI config state
(Keith Busch)
- Reference count devices during AER handling to avoid race issue with
concurrent hot removal (Keith Busch)
- If an Upstream Port reports ERR_FATAL, don't try to read the Port's
config space because it is probably unreachable (Keith Busch)
- During error handling, use slot-specific reset instead of secondary
bus reset to avoid link up/down issues on hotplug ports (Keith Busch)
- Restore previous AER/DPC handling that does not remove and
re-enumerate devices on ERR_FATAL (Keith Busch)
- Notify all drivers that may be affected by error recovery resets
(Keith Busch)
- Always generate error recovery uevents, even if a driver doesn't have
error callbacks (Keith Busch)
- Make PCIe link active reporting detection generic (Keith Busch)
- Support D3cold in PCIe hierarchies during system sleep and runtime,
including hotplug and Thunderbolt ports (Mika Westerberg)
- Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots
are empty or occupied (Jon Derrick)
- Remove duplicated include from pci/pcie/err.c and unused variable
from cpqphp (YueHaibing)
- Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza
Pawandeep)
- Uninline PCI bus accessors for better ftracing (Keith Busch)
- Remove unused AER Root Port .error_resume method (Keith Busch)
- Use kfifo in AER instead of a local version (Keith Busch)
- Use threaded IRQ in AER bottom half (Keith Busch)
- Use managed resources in AER core (Keith Busch)
- Reuse pcie_port_find_device() for AER injection (Keith Busch)
- Abstract AER interrupt handling to disconnect error injection (Keith
Busch)
- Refactor AER injection callbacks to simplify future improvments
(Keith Busch)
- Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski)
- Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko)
- Add switch fall-through annotations (Gustavo A. R. Silva)
- Remove unused Switchtec quirk variable (Joshua Abraham)
- Fix pci.c kernel-doc warning (Randy Dunlap)
- Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig)
- Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng)
- Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid
useless dmesg errors (Logan Gunthorpe)
- Update Switchtec NTB documentation (Wesley Yung)
- Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz)
- Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang)
- Add PCI support for peer-to-peer DMA (Logan Gunthorpe)
- Add sysfs group for PCI peer-to-peer memory statistics (Logan
Gunthorpe)
- Add PCI peer-to-peer DMA scatterlist mapping interface (Logan
Gunthorpe)
- Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan
Gunthorpe)
- Add PCI peer-to-peer DMA driver writer's documentation (Logan
Gunthorpe)
- Add block layer flag to indicate driver support for PCI peer-to-peer
DMA (Logan Gunthorpe)
- Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P
memory (Logan Gunthorpe)
- Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan
Gunthorpe)
- Add nvme-pci support for PCI peer-to-peer memory in requests (Logan
Gunthorpe)
- Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise,
Christoph Hellwig, Logan Gunthorpe)
- Cache VF config space size to optimize enumeration of many VFs
(KarimAllah Ahmed)
- Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas)
- Fix VMD AERSID quirk Device ID matching (Jon Derrick)
- Fix Cadence PHY handling during probe (Alan Douglas)
- Signal Cadence Endpoint interrupts via AXI region 0 instead of last
region (Alan Douglas)
- Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan
Douglas)
- Remove redundant controller tests for "device_type == pci" (Rob
Herring)
- Document R-Car E3 (R8A77990) bindings (Tho Vu)
- Add device tree support for R-Car r8a7744 (Biju Das)
- Drop unused mvebu PCIe capability code (Thomas Petazzoni)
- Add shared PCI bridge emulation code (Thomas Petazzoni)
- Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni)
- Add aardvark Root Port emulation (Thomas Petazzoni)
- Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach)
- Add initial power management for i.MX7 (Leonard Crestez)
- Add PME_Turn_Off support for i.MX7 (Leonard Crestez)
- Fix qcom runtime power management error handling (Bjorn Andersson)
- Update TI dra7xx unaligned access errata workaround for host mode as
well as endpoint mode (Vignesh R)
- Fix kirin section mismatch warning (Nathan Chancellor)
- Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare)
- Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I)
- Update Keystone to use MRRS quirk for host bridge instead of open
coding (Kishon Vijay Abraham I)
- Refactor Keystone link establishment (Kishon Vijay Abraham I)
- Simplify and speed up Keystone link training (Kishon Vijay Abraham I)
- Remove unused Keystone host_init argument (Kishon Vijay Abraham I)
- Merge Keystone driver files into one (Kishon Vijay Abraham I)
- Remove redundant Keystone platform_set_drvdata() (Kishon Vijay
Abraham I)
- Rename Keystone functions for uniformity (Kishon Vijay Abraham I)
- Add Keystone device control module DT binding (Kishon Vijay Abraham
I)
- Use SYSCON API to get Keystone control module device IDs (Kishon
Vijay Abraham I)
- Clean up Keystone PHY handling (Kishon Vijay Abraham I)
- Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I)
- Clean up Keystone config space access checks (Kishon Vijay Abraham I)
- Get Keystone outbound window count from DT (Kishon Vijay Abraham I)
- Clean up Keystone outbound window configuration (Kishon Vijay Abraham
I)
- Clean up Keystone DBI setup (Kishon Vijay Abraham I)
- Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I)
- Fix Keystone IRQ status checking (Kishon Vijay Abraham I)
- Add debug messages for all Keystone errors (Kishon Vijay Abraham I)
- Clean up Keystone includes and macros (Kishon Vijay Abraham I)
- Fix Mediatek unchecked return value from devm_pci_remap_iospace()
(Gustavo A. R. Silva)
- Fix Mediatek endpoint/port matching logic (Honghui Zhang)
- Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui
Zhang)
- Remove redundant Mediatek PM domain check (Honghui Zhang)
- Convert Mediatek to pci_host_probe() (Honghui Zhang)
- Fix Mediatek MSI enablement (Honghui Zhang)
- Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang)
- Add Mediatek loadable module support (Honghui Zhang)
- Detach VMD resources after stopping root bus to prevent orphan
resources (Jon Derrick)
- Convert pcitest build process to that used by other tools (iio, perf,
etc) (Gustavo Pimentel)
* tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
PCI/AER: Refactor error injection fallbacks
PCI/AER: Abstract AER interrupt handling
PCI/AER: Reuse existing pcie_port_find_device() interface
PCI/AER: Use managed resource allocations
PCI: pcie: Remove redundant 'default n' from Kconfig
PCI: aardvark: Implement emulated root PCI bridge config space
PCI: mvebu: Convert to PCI emulated bridge config space
PCI: mvebu: Drop unused PCI express capability code
PCI: Introduce PCI bridge emulated config space common logic
PCI: vmd: Detach resources after stopping root bus
nvmet: Optionally use PCI P2P memory
nvmet: Introduce helper functions to allocate and free request SGLs
nvme-pci: Add support for P2P memory in requests
nvme-pci: Use PCI p2pmem subsystem to manage the CMB
IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]()
block: Add PCI P2P flag for request queue
PCI/P2PDMA: Add P2P DMA driver writer's documentation
docs-rst: Add a new directory for PCI documentation
PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers
PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset
...
Pull security subsystem updates from James Morris:
"In this patchset, there are a couple of minor updates, as well as some
reworking of the LSM initialization code from Kees Cook (these prepare
the way for ordered stackable LSMs, but are a valuable cleanup on
their own)"
* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
LSM: Don't ignore initialization failures
LSM: Provide init debugging infrastructure
LSM: Record LSM name in struct lsm_info
LSM: Convert security_initcall() into DEFINE_LSM()
vmlinux.lds.h: Move LSM_TABLE into INIT_DATA
LSM: Convert from initcall to struct lsm_info
LSM: Remove initcall tracing
LSM: Rename .security_initcall section to .lsm_info
vmlinux.lds.h: Avoid copy/paste of security_init section
LSM: Correctly announce start of LSM initialization
security: fix LSM description location
keys: Fix the use of the C++ keyword "private" in uapi/linux/keyctl.h
seccomp: remove unnecessary unlikely()
security: tomoyo: Fix obsolete function
security/capabilities: remove check for -EINVAL
Pull siginfo updates from Eric Biederman:
"I have been slowly sorting out siginfo and this is the culmination of
that work.
The primary result is in several ways the signal infrastructure has
been made less error prone. The code has been updated so that manually
specifying SEND_SIG_FORCED is never necessary. The conversion to the
new siginfo sending functions is now complete, which makes it
difficult to send a signal without filling in the proper siginfo
fields.
At the tail end of the patchset comes the optimization of decreasing
the size of struct siginfo in the kernel from 128 bytes to about 48
bytes on 64bit. The fundamental observation that enables this is by
definition none of the known ways to use struct siginfo uses the extra
bytes.
This comes at the cost of a small user space observable difference.
For the rare case of siginfo being injected into the kernel only what
can be copied into kernel_siginfo is delivered to the destination, the
rest of the bytes are set to 0. For cases where the signal and the
si_code are known this is safe, because we know those bytes are not
used. For cases where the signal and si_code combination is unknown
the bits that won't fit into struct kernel_siginfo are tested to
verify they are zero, and the send fails if they are not.
I made an extensive search through userspace code and I could not find
anything that would break because of the above change. If it turns out
I did break something it will take just the revert of a single change
to restore kernel_siginfo to the same size as userspace siginfo.
Testing did reveal dependencies on preferring the signo passed to
sigqueueinfo over si->signo, so bit the bullet and added the
complexity necessary to handle that case.
Testing also revealed bad things can happen if a negative signal
number is passed into the system calls. Something no sane application
will do but something a malicious program or a fuzzer might do. So I
have fixed the code that performs the bounds checks to ensure negative
signal numbers are handled"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (80 commits)
signal: Guard against negative signal numbers in copy_siginfo_from_user32
signal: Guard against negative signal numbers in copy_siginfo_from_user
signal: In sigqueueinfo prefer sig not si_signo
signal: Use a smaller struct siginfo in the kernel
signal: Distinguish between kernel_siginfo and siginfo
signal: Introduce copy_siginfo_from_user and use it's return value
signal: Remove the need for __ARCH_SI_PREABLE_SIZE and SI_PAD_SIZE
signal: Fail sigqueueinfo if si_signo != sig
signal/sparc: Move EMT_TAGOVF into the generic siginfo.h
signal/unicore32: Use force_sig_fault where appropriate
signal/unicore32: Generate siginfo in ucs32_notify_die
signal/unicore32: Use send_sig_fault where appropriate
signal/arc: Use force_sig_fault where appropriate
signal/arc: Push siginfo generation into unhandled_exception
signal/ia64: Use force_sig_fault where appropriate
signal/ia64: Use the force_sig(SIGSEGV,...) in ia64_rt_sigreturn
signal/ia64: Use the generic force_sigsegv in setup_frame
signal/arm/kvm: Use send_sig_mceerr
signal/arm: Use send_sig_fault where appropriate
signal/arm: Use force_sig_fault where appropriate
...
The MPC885 has SEC engine version 1.2 with the following details:
- Number of Crypto channels: 1
- Exec Units: DEU, MDEU and AESU
- Available descriptors: 00010, 00100, 00110, 01000, 11000, 11010
It is also supposed to have descriptor 00000, but it doesn't work
properly so we keep it out for the moment.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <oss@buserror.net>
mpic_get_primary_version() is not defined when not using MPIC.
The compile error log like:
arch/powerpc/sysdev/built-in.o: In function `fsl_of_msi_probe':
fsl_msi.c:(.text+0x150c): undefined reference to `fsl_mpic_primary_get_version'
Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Reported-by: Radu Rendec <radu.rendec@gmail.com>
Fixes: 807d38b73b ("powerpc/mpic: Add get_version API both for internal and external use")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Recently in commit 7241d26e81 ("powerpc/64: properly initialise
the stackprotector canary on SMP.") we fixed a crash with stack
protector on SMP by initialising the stack canary in
cpu_idle_thread_init().
But this can also causes crashes, when a CPU comes back online after
being offline:
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: pnv_smp_cpu_kill_self+0x2a0/0x2b0
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.19.0-rc3-gcc-7.3.1-00168-g4ffe713b7587 #94
Call Trace:
dump_stack+0xb0/0xf4 (unreliable)
panic+0x144/0x328
__stack_chk_fail+0x2c/0x30
pnv_smp_cpu_kill_self+0x2a0/0x2b0
cpu_die+0x48/0x70
arch_cpu_idle_dead+0x20/0x40
do_idle+0x274/0x390
cpu_startup_entry+0x38/0x50
start_secondary+0x5e4/0x600
start_secondary_prolog+0x10/0x14
Looking at the stack we see that the canary value in the stack frame
doesn't match the canary in the task/paca. That is because we have
reinitialised the task/paca value, but then the CPU coming online has
returned into a function using the old canary value. That causes the
comparison to fail.
Instead we can call boot_init_stack_canary() from start_secondary()
which never returns. This is essentially what the generic code does in
cpu_startup_entry() under #ifdef X86, we should make that non-x86
specific in a future patch.
Fixes: 7241d26e81 ("powerpc/64: properly initialise the stackprotector canary on SMP.")
Reported-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
According to the T2080RDB schematics, for the CS4315 PHY, the XFI 1 lane is
connected to SFP 2 and the XFI 2 lane is connected to SFP 1. Change the
device tree to reflect the correct PHY order and port association.
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
The powernv platform maintains 2 TCE tables for VFIO - a hardware TCE
table and a table with userspace addresses. These tables are radix trees,
we allocate indirect levels when they are written to. Since
the memory allocation is problematic in real mode, we have 2 accessors
to the entries:
- for virtual mode: it allocates the memory and it is always expected
to return non-NULL;
- fr real mode: it does not allocate and can return NULL.
Also, DMA windows can span to up to 55 bits of the address space and since
we never have this much RAM, such windows are sparse. However currently
the SPAPR TCE IOMMU driver walks through all TCEs to unpin DMA memory.
Since we maintain a userspace addresses table for VFIO which is a mirror
of the hardware table, we can use it to know which parts of the DMA
window have not been mapped and skip these so does this patch.
The bare metal systems do not have this problem as they use a bypass mode
of a PHB which maps RAM directly.
This helps a lot with sparse DMA windows, reducing the shutdown time from
about 3 minutes per 1 billion TCEs to a few seconds for 32GB sparse guest.
Just skipping the last level seems to be good enough.
As non-allocating accessor is used now in virtual mode as well, rename it
from IOMMU_TABLE_USERSPACE_ENTRY_RM (real mode) to _RO (read only).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
commit b96672dd84 ("powerpc: Machine check interrupt is a non-
maskable interrupt") added a call to nmi_enter() at the beginning of
machine check restart exception handler. Due to that, in_interrupt()
always returns true regardless of the state before entering the
exception, and die() panics even when the system was not already in
interrupt.
This patch calls nmi_exit() before calling die() in order to restore
the interrupt state we had before calling nmi_enter()
Fixes: b96672dd84 ("powerpc: Machine check interrupt is a non-maskable interrupt")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The recent module relocation overflow crash demonstrated that we
have no range checking on REL32 relative relocations. This patch
implements a basic check, the same kernel that previously oopsed
and rebooted now continues with some of these errors when loading
the module:
module_64: x_tables: REL32 527703503449812 out of range!
Possibly other relocations (ADDR32, REL16, TOC16, etc.) should also have
overflow checks.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we're running on Book3S with the Radix MMU enabled the page table
dump currently prints the wrong addresses because it uses the wrong
start address.
Fix it to use PAGE_OFFSET rather than KERN_VIRT_START.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
At boot we print the ranges we've mapped for the linear mapping and
what page size we've used. Also track whether the range is mapped
executable or not and display that as well.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If we look closely at the logic in create_physical_mapping(), when
we're doing STRICT_KERNEL_RWX, we do the following steps:
- determine the gap from where we are to the end of the range
- choose an appropriate mapping_size based on the gap
- check if that mapping_size would overlap the __init_begin
boundary, and if not choose an appropriate mapping_size
We can simplify the logic by taking the __init_begin boundary into
account when we calculate the initial gap.
So add a next_boundary() function which tells us what the next
boundary is, either the __init_begin boundary or end. In future we can
add more boundaries.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we have CONFIG_STRICT_KERNEL_RWX enabled, we want to split the
linear mapping at the text/data boundary so we can map the kernel
text read only.
The current logic uses a goto inside the for loop, which works, but is
hard to reason about.
When we hit the goto retry case we set max_mapping_size to PMD_SIZE
and go back to the start.
Setting max_mapping_size means we skip the PUD case and go to the PMD
case.
We know we will pass the alignment and gap checks because the only
reason we are there is we hit the goto retry, and that is guarded by
mapping_size == PUD_SIZE, which means addr is PUD aligned and gap is
greater or equal to PUD_SIZE.
So the only part of the check that can fail is the mmu_psize_defs
check for the 2M page size.
If we just duplicate that check we can avoid the goto, and we get the
same result.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we have CONFIG_STRICT_KERNEL_RWX enabled, we want to split the
linear mapping at the text/data boundary so we can map the kernel
text read only.
Currently we always use a small page at the text/data boundary, even
when that's not necessary:
Mapped 0x0000000000000000-0x0000000000e00000 with 2.00 MiB pages
Mapped 0x0000000000e00000-0x0000000001000000 with 64.0 KiB pages
Mapped 0x0000000001000000-0x0000000040000000 with 2.00 MiB pages
This is because the check that the mapping crosses the __init_begin
boundary is too strict, it also returns true when we map exactly up to
the boundary.
So fix it to check that the mapping would actually map past
__init_begin, and with that we see:
Mapped 0x0000000000000000-0x0000000040000000 with 2.00 MiB pages
Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we have CONFIG_STRICT_KERNEL_RWX enabled, we want to split the
linear mapping at the text/data boundary so we can map the kernel text
read only.
But the current logic uses small pages for the entire text section,
regardless of whether a larger page size would fit. eg. with the
boundary at 16M we could use 2M pages, but instead we use 64K pages up
to the 16M boundary:
Mapped 0x0000000000000000-0x0000000001000000 with 64.0 KiB pages
Mapped 0x0000000001000000-0x0000000040000000 with 2.00 MiB pages
Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages
This is because the test is checking if addr is < __init_begin
and addr + mapping_size is >= _stext. But that is true for all pages
between _stext and __init_begin.
Instead what we want to check is if we are crossing the text/data
boundary, which is at __init_begin. With that fixed we see:
Mapped 0x0000000000000000-0x0000000000e00000 with 2.00 MiB pages
Mapped 0x0000000000e00000-0x0000000001000000 with 64.0 KiB pages
Mapped 0x0000000001000000-0x0000000040000000 with 2.00 MiB pages
Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages
ie. we're correctly using 2MB pages below __init_begin, but we still
drop down to 64K pages unnecessarily at the boundary.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we have CONFIG_STRICT_KERNEL_RWX enabled, we try to split the
kernel linear (1:1) mapping so that the kernel text is in a separate
page to kernel data, so we can mark the former read-only.
We could achieve that just by always using 64K pages for the linear
mapping, but we try to be smarter. Instead we use huge pages when
possible, and only switch to smaller pages when necessary.
However we have an off-by-one bug in that logic, which causes us to
calculate the wrong boundary between text and data.
For example with the end of the kernel text at 16M we see:
radix-mmu: Mapped 0x0000000000000000-0x0000000001200000 with 64.0 KiB pages
radix-mmu: Mapped 0x0000000001200000-0x0000000040000000 with 2.00 MiB pages
radix-mmu: Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages
ie. we mapped from 0 to 18M with 64K pages, even though the boundary
between text and data is at 16M.
With the fix we see we're correctly hitting the 16M boundary:
radix-mmu: Mapped 0x0000000000000000-0x0000000001000000 with 64.0 KiB pages
radix-mmu: Mapped 0x0000000001000000-0x0000000040000000 with 2.00 MiB pages
radix-mmu: Mapped 0x0000000040000000-0x0000000100000000 with 1.00 GiB pages
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently, we expect to be able to reach ftrace_caller() from all
ftrace-enabled functions through a single relative branch. With large
kernel configs, we see functions outside of 32MB of ftrace_caller()
causing ftrace_init() to bail.
In such configurations, gcc/ld emits two types of trampolines for mcount():
1. A long_branch, which has a single branch to mcount() for functions that
are one hop away from mcount():
c0000000019e8544 <00031b56.long_branch._mcount>:
c0000000019e8544: 4a 69 3f ac b c00000000007c4f0 <._mcount>
2. A plt_branch, for functions that are farther away from mcount():
c0000000051f33f8 <0008ba04.plt_branch._mcount>:
c0000000051f33f8: 3d 82 ff a4 addis r12,r2,-92
c0000000051f33fc: e9 8c 04 20 ld r12,1056(r12)
c0000000051f3400: 7d 89 03 a6 mtctr r12
c0000000051f3404: 4e 80 04 20 bctr
We can reuse those trampolines for ftrace if we can have those
trampolines go to ftrace_caller() instead. However, with ABIv2, we
cannot depend on r2 being valid. As such, we use only the long_branch
trampolines by patching those to instead branch to ftrace_caller or
ftrace_regs_caller.
In addition, we add additional trampolines around .text and .init.text
to catch locations that are covered by the plt branches. This allows
ftrace to work with most large kernel configurations.
For now, we always patch the trampolines to go to ftrace_regs_caller,
which is slightly inefficient. This can be optimized further at a later
point.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If CONFIG_PPC_SPLPAR is not selected, steal_time will always
be NUL, so accounting it is pointless
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
scaled cputime is only meaningfull when the processor has
SPURR and/or PURR, which means only on PPC64.
Removing it on PPC32 significantly reduces the size of
vtime_account_system() and vtime_account_idle() on an 8xx:
Before:
00000000 l F .text 000000a8 vtime_delta
00000280 g F .text 0000010c vtime_account_system
0000038c g F .text 00000048 vtime_account_idle
After:
(vtime_delta gets inlined inside the two functions)
000001d8 g F .text 000000a0 vtime_account_system
00000278 g F .text 00000038 vtime_account_idle
In terms of performance, we also get approximatly 7% improvement on
task switch. The following small benchmark app is run with perf stat:
void *thread(void *arg)
{
int i;
for (i = 0; i < atoi((char*)arg); i++)
pthread_yield();
}
int main(int argc, char **argv)
{
pthread_t th1, th2;
pthread_create(&th1, NULL, thread, argv[1]);
pthread_create(&th2, NULL, thread, argv[1]);
pthread_join(th1, NULL);
pthread_join(th2, NULL);
return 0;
}
Before the patch:
Performance counter stats for 'chrt -f 98 ./sched 100000' (50 runs):
8228.476465 task-clock (msec) # 0.954 CPUs utilized ( +- 0.23% )
200004 context-switches # 0.024 M/sec ( +- 0.00% )
After the patch:
Performance counter stats for 'chrt -f 98 ./sched 100000' (50 runs):
7649.070444 task-clock (msec) # 0.955 CPUs utilized ( +- 0.27% )
200004 context-switches # 0.026 M/sec ( +- 0.00% )
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
scaled cputime is only meaningfull when the processor has
SPURR and/or PURR, which means only on PPC64.
In preparation of the following patch that will remove
CONFIG_ARCH_HAS_SCALED_CPUTIME on PPC32, this patch moves
all scaled cputing accounting logic into dedicated functions.
This patch doesn't change any functionality. It's only code
reorganisation.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
ipic_get_mcp_status() is used by targets implementing NMI
watchdog in target specific machine check handler in order
to known whether a machine check results from a watchdog
NMI reset.
In case of very early machine check, primary_ipic pointer
might not have been set yet, so ipic_get_mcp_status() needs
to check it for nullity before using it.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch fixes the following warnings (obtained with make W=1).
arch/powerpc/mm/slice.c: In function 'slice_range_to_mask':
arch/powerpc/mm/slice.c:73:12: error: comparison is always true due to limited range of data type [-Werror=type-limits]
if (start < SLICE_LOW_TOP) {
^
arch/powerpc/mm/slice.c:81:20: error: comparison is always false due to limited range of data type [-Werror=type-limits]
if ((start + len) > SLICE_LOW_TOP) {
^
arch/powerpc/mm/slice.c: In function 'slice_mask_for_free':
arch/powerpc/mm/slice.c:136:17: error: comparison is always true due to limited range of data type [-Werror=type-limits]
if (high_limit <= SLICE_LOW_TOP)
^
arch/powerpc/mm/slice.c: In function 'slice_check_range_fits':
arch/powerpc/mm/slice.c:185:12: error: comparison is always true due to limited range of data type [-Werror=type-limits]
if (start < SLICE_LOW_TOP) {
^
arch/powerpc/mm/slice.c:195:39: error: comparison is always false due to limited range of data type [-Werror=type-limits]
if (SLICE_NUM_HIGH && ((start + len) > SLICE_LOW_TOP)) {
^
arch/powerpc/mm/slice.c: In function 'slice_scan_available':
arch/powerpc/mm/slice.c:306:11: error: comparison is always true due to limited range of data type [-Werror=type-limits]
if (addr < SLICE_LOW_TOP) {
^
arch/powerpc/mm/slice.c: In function 'get_slice_psize':
arch/powerpc/mm/slice.c:709:11: error: comparison is always true due to limited range of data type [-Werror=type-limits]
if (addr < SLICE_LOW_TOP) {
^
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch fixes the following warnings (obtained with make W=1).
arch/powerpc/mm/slice.c: At top level:
arch/powerpc/mm/slice.c:682:15: error: no previous prototype for 'arch_get_unmapped_area' [-Werror=missing-prototypes]
unsigned long arch_get_unmapped_area(struct file *filp,
^
arch/powerpc/mm/slice.c:692:15: error: no previous prototype for 'arch_get_unmapped_area_topdown' [-Werror=missing-prototypes]
unsigned long arch_get_unmapped_area_topdown(struct file *filp,
^
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a trace point for tlbia (Translation Lookaside Buffer Invalidate
All) instruction.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Since commit bd0dbb73e0 ("powerpc/mm/books3s: Add new pte bit to
mark pte temporarily invalid."), _PAGE_PRESENT doesn't mean exactly
that a page is present. A page is also considered preset when
_PAGE_INVALID is set.
This patch changes the meaning of "present" and adds a status "valid"
associated to the _PAGE_PRESENT flag.
Fixes: bd0dbb73e0 ("powerpc/mm/books3s: Add new pte bit to mark pte temporarily invalid.")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch exports the raw per-CPU VPA data via debugfs.
A per-CPU file is created which exports the VPA data of
that CPU to help debug some of the VPA related issues or
to analyze the per-CPU VPA related statistics.
v3: Removed offline CPU check.
v2: Included offline CPU check and other review comments.
Signed-off-by: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
module_frob_arch_sections() is called before the module is moved to its
final location. The function descriptor section addresses we are setting
here are thus invalid. Fix this by processing opd section during
module_finalize()
Fixes: 5633e85b2c ("powerpc64: Add .opd based function descriptor dereference")
Cc: stable@vger.kernel.org # v4.16
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We implement regs_set_return_value() and override_function_with_return()
for this purpose.
On powerpc, a return from a function (blr) just branches to the location
contained in the link register. So, we can just update pt_regs rather
than redirecting execution to a dummy function that returns.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This disables the use of the streamlined entry path for radix guests
on early POWER9 chips that need the workaround added in commit
a25bd72bad ("powerpc/mm/radix: Workaround prefetch issue with KVM",
2017-07-24), because the streamlined entry path does not include
that workaround. This also means that we can't do nested HV-KVM
on those chips.
Since the chips that need that workaround are the same ones that can't
run both radix and HPT guests at the same time on different threads of
a core, we use the existing 'no_mixing_hpt_and_radix' variable that
identifies those chips to identify when we can't use the new guest
entry path, and when we can't do nested virtualization.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Like all other dma mapping drivers just return an error code instead
of an actual memory buffer. The reason for the overflow buffer was
that at the time swiotlb was invented there was no way to check for
dma mapping errors, but this has long been fixed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
In the recent commit 8b78fdb045 ("powerpc/time: Use
clockevents_register_device(), fixing an issue with large
decrementer") we changed the way we initialise the decrementer
clockevent(s).
We no longer initialise the mult & shift values of
decrementer_clockevent itself.
This has the effect of breaking PR KVM, because it uses those values
in kvmppc_emulate_dec(). The symptom is guest kernels spin forever
mid-way through boot.
For now fix it by assigning back to decrementer_clockevent the mult
and shift values.
Fixes: 8b78fdb045 ("powerpc/time: Use clockevents_register_device(), fixing an issue with large decrementer")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
I'm pretty sure this is dead code, it's only used by the a.out core
dump code, and we don't support a.out. We should remove it.
But while it's in the tree it should be using the ABI version of
pt_regs which is called user_pt_regs in the kernel, because the whole
struct is written to the core dump and so its size shouldn't change.
Note this isn't a uapi header so we don't need an ifdef.
Fixes: 002af9391b ("powerpc: Split user/kernel definitions of struct pt_regs")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
My recent patch to split pt_regs between user and kernel missed
the usage in struct sigcontext.
Because this is a user visible struct it should be using the user
visible definition, which when we're building for the kernel is called
struct user_pt_regs.
As far as I can see this hasn't actually caused a bug (yet), because
we don't use the sizeof() the sigcontext->regs anywhere. But we should
still fix it to avoid confusion and future bugs.
Fixes: 002af9391b ("powerpc: Split user/kernel definitions of struct pt_regs")
Reported-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Back when I added -Werror in commit ba55bd7436 ("powerpc: Add
configurable -Werror for arch/powerpc") I did it by adding it to most
of the arch Makefiles.
At the time we excluded math-emu, because apparently it didn't build
cleanly. But that seems to have been fixed somewhere in the interim.
So move the -Werror addition to the top-level of the arch, this saves
us from repeating it in every Makefile and means we won't forget to
add it to any new sub-dirs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This is a nice cleanup, arch/powerpc/Makefile is long and messy so
moving this out helps a little.
It also allows us to do:
$ make arch/powerpc
Which can be helpful if you just want to compile test some changes to
arch code and not link everything.
Finally it also gives us a single place to do subdir-cc-flags
assignments which affect the whole of arch/powerpc, which we will do
in a future patch.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
do_exit() already includes a test to panic() is in_interrupt()
This patch removes powerpc one which is redundant.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When creating the boot-time FDT from an actual Open Firmware live
tree, let's generate "phandle" properties for the phandles instead
of the old deprecated "linux,phandle".
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Unsplit warning printf()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
prom_init.c must not modify the kernel image outside
of the .bss.prominit section. Thus make sure that
prom_init.o doesn't have anything in any of these:
.data
.bss
.init.data
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This makes __prombss its own section, and for now store
it in .bss.
This will give us the ability later to store it elsewhere
and/or free it after boot (it's about 8KB).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As they are no longer used past the end of prom_init
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Make the existing initialized definition constant and copy
it to a __prombss copy
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Initialize it dynamically instead of statically
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We removed support for running under any OPAL version
earlier than v3 in 2015 (they never saw the light of day
anyway), but we kept some leftovers of this support in
prom_init.c, so let's take it out.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This replaces all occurrences of __initdata for uninitialized
data with a new __prombss
Currently __promdata is defined to be __initdata but we'll
eventually change that.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Adds a driver that implements support for enabling and accessing PAPR
SCM regions. Unfortunately due to how the PAPR interface works we can't
use the existing of_pmem driver (yet) because:
a) The guest is required to use the H_SCM_BIND_MEM h-call to add
add the SCM region to it's physical address space, and
b) There is currently no mechanism for relating a bare of_pmem region
to the backing DIMM (or not-a-DIMM for our case).
Both of these are easily handled by rolling the functionality into a
seperate driver so here we are...
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch implements support for discovering storage class memory
devices at boot and for handling hotplug of new regions via RTAS
hotplug events.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
[mpe: Fix CONFIG_MEMORY_HOTPLUG=n build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When printing the machine check cause, the cause appears on the
following line due to bad use of printk without \n:
[ 33.663993] Machine check in kernel mode.
[ 33.664011] Caused by (from SRR1=9032):
[ 33.664036] Data access error at address c90c8000
This patch fixes it by using pr_cont() for the second part:
[ 133.258131] Machine check in kernel mode.
[ 133.258146] Caused by (from SRR1=9032): Data access error at address c90c8000
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Book3e defines both _PAGE_USER and _PAGE_PRIVILEGED, so the nohash
default pte_mkprivileged() and pte_mkuser() are not usable.
This patch redefines them for book3e.
In theorie, only pte_mkprivileged() needs to be redefined because
_PAGE_USER includes _PAGE_PRIVILEGED, but it is less confusing
to redefine both.
Fixes: a0da4bc166 ("powerpc/mm: Allow platforms to redefine some helpers")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Other archs do the same and instead of adding required pte bits (which
got masked out) in __ioremap_at(), make sure we filter only pfn bits
out.
Fixes: 26973fa5ac ("powerpc/mm: use pte helpers in generic code")
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently we limit the max addressable memory to 128TB. This patch increase the
limit to 2PB. We can have devices like nvdimm which adds memory above 512TB
limit.
We still don't support regular system ram above 512TB. One of the challenge with
that is the percpu allocator, that allocates per node memory and use the max
distance between them as the percpu offsets. This means with large gap in
address space ( system ram above 1PB) we will run out of vmalloc space to map
the percpu allocation.
In order to support addressable memory above 512TB, kernel should be able to
linear map this range. To do that with hash translation we now add 4 context
to kernel linear map region. Our per context addressable range is 512TB. We
still keep VMALLOC and VMEMMAP region to old size. SLB miss handlers is updated
to validate these limit.
We also limit this update to SPARSEMEM_VMEMMAP and SPARSEMEM_EXTREME
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We will be adding get_kernel_context later. Update function name to indicate
this handle context allocation user space address.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds CONFIG_DEBUG_VM checks to ensure:
- The kernel stack is in the SLB after it's flushed and bolted.
- We don't insert an SLB for an address that is aleady in the SLB.
- The kernel SLB miss handler does not take an SLB miss.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
slb_flush_and_rebolt() is misleading, it is called in virtual mode, so
it can not possibly change the stack, so it should not be touching the
shadow area. And since vmalloc is no longer bolted, it should not
change any bolted mappings at all.
Change the name to slb_flush_and_restore_bolted(), and have it just
load the kernel stack from what's currently in the shadow SLB area.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When switching processes, currently all user SLBEs are cleared, and a
few (exec_base, pc, and stack) are preloaded. In trivial testing with
small apps, this tends to miss the heap and low 256MB segments, and it
will also miss commonly accessed segments on large memory workloads.
Add a simple round-robin preload cache that just inserts the last SLB
miss into the head of the cache and preloads those at context switch
time. Every 256 context switches, the oldest entry is removed from the
cache to shrink the cache and require fewer slbmte if they are unused.
Much more could go into this, including into the SLB entry reclaim
side to track some LRU information etc, which would require a study of
large memory workloads. But this is a simple thing we can do now that
is an obvious win for common workloads.
With the full series, process switching speed on the context_switch
benchmark on POWER9/hash (with kernel speculation security masures
disabled) increases from 140K/s to 178K/s (27%).
POWER8 does not change much (within 1%), it's unclear why it does not
see a big gain like POWER9.
Booting to busybox init with 256MB segments has SLB misses go down
from 945 to 69, and with 1T segments 900 to 21. These could almost all
be eliminated by preloading a bit more carefully with ELF binary
loading.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This will be used by the SLB code in the next patch, but for now this
sets the slb_addr_limit to the correct size for 32-bit tasks.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add 32-entry bitmaps to track the allocation status of the first 32
SLB entries, and whether they are user or kernel entries. These are
used to allocate free SLB entries first, before resorting to the round
robin allocator.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch moves SLB miss handlers completely to C, using the standard
exception handler macros to set up the stack and branch to C.
This can be done because the segment containing the kernel stack is
always bolted, so accessing it with relocation on will not cause an
SLB exception.
Arbitrary kernel memory must not be accessed when handling kernel
space SLB misses, so care should be taken there. However user SLB
misses can access any kernel memory, which can be used to move some
fields out of the paca (in later patches).
User SLB misses could quite easily reconcile IRQs and set up a first
class kernel environment and exit via ret_from_except, however that
doesn't seem to be necessary at the moment, so we only do that if a
bad fault is encountered.
[ Credit to Aneesh for bug fixes, error checks, and improvements to
bad address handling, etc ]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Disallow tracing for all of slb.c for now.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
PPR is the odd register out when it comes to interrupt handling, it is
saved in current->thread.ppr while all others are saved on the stack.
The difficulty with this is that accessing thread.ppr can cause a SLB
fault, but the SLB fault handler implementation in C change had
assumed the normal exception entry handlers would not cause an SLB
fault.
Fix this by allocating room in the interrupt stack to save PPR.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Now that we've split the user & kernel versions of pt_regs we need to
be more careful in the ptrace code.
For now we've ensured the location of the fields in both structs is
the same, so most of the ptrace code doesn't need updating.
But there are a few places where we use sizeof(pt_regs), and these
will be wrong as soon as we increase the size of the kernel structure.
So flip them all to use sizeof(user_pt_regs).
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We use a shared definition for struct pt_regs in uapi/asm/ptrace.h.
That means the layout of the structure is ABI, ie. we can't change it.
That would be fine if it was only used to describe the user-visible
register state of a process, but it's also the struct we use in the
kernel to describe the registers saved in an interrupt frame.
We'd like more flexibility in the content (and possibly layout) of the
kernel version of the struct, but currently that's not possible.
So split the definition into a user-visible definition which remains
unchanged, and a kernel internal one.
At the moment they're still identical, and we check that at build
time. That's because we have code (in ptrace etc.) that assumes that
they are the same. We will fix that code in future patches, and then
we can break the strict symmetry between the two structs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In the same spirit as already done in pte query helpers,
this patch changes pte setting helpers to perform endian
conversions on the constants rather than on the pte value.
In the meantime, it changes pte_access_permitted() to use
pte helpers for the same reason.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
_PAGE_PRIVILEGED corresponds to the SH bit which doesn't protect
against user access but only disables ASID verification on kernel
accesses. User access is controlled with _PMD_USER flag.
Name it _PAGE_SH instead of _PAGE_PRIVILEGED
_PAGE_HUGE corresponds to the SPS bit which doesn't really tells
that's it is a huge page but only that it is not a 4k page.
Name it _PAGE_SPS instead of _PAGE_HUGE
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Do not include pte-common.h in nohash/32/pgtable.h
As that was the last includer, get rid of pte-common.h
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Cache related flags like _PAGE_COHERENT and _PAGE_WRITETHRU
are defined on most platforms. The platforms not defining
them don't define any alternative. So we can give them a NUL
value directly for those platforms directly.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The 40xx defines _PAGE_HWWRITE while others don't.
The 8xx defines _PAGE_RO instead of _PAGE_RW.
The 8xx defines _PAGE_PRIVILEGED instead of _PAGE_USER.
The 8xx defines _PAGE_HUGE and _PAGE_NA while others don't.
Lets those platforms redefine pte_write(), pte_wrprotect() and
pte_mkwrite() and get _PAGE_RO and _PAGE_HWWRITE off the common
helpers.
Lets the 8xx redefine pte_user(), pte_mkprivileged() and pte_mkuser()
and get rid of _PAGE_PRIVILEGED and _PAGE_USER default values.
Lets the 8xx redefine pte_mkhuge() and get rid of
_PAGE_HUGE default value.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
nohash/64 only uses book3e PTE flags, so it doesn't need pte-common.h
This also allows to drop PAGE_SAO and H_PAGE_4K_PFN from pte_common.h
as they are only used by PPC64
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The base kernel PAGE_XXXX definition sets are more or less platform
specific. Lets distribute them close to platform _PAGE_XXX flags
definition, and customise them to their exact platform flags.
Also defines _PAGE_PSIZE and _PTE_NONE_MASK for each platform
allthough they are defined as 0.
Do the same with _PMD flags like _PMD_USER and _PMD_PRESENT_MASK
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Now the pte-common.h is only for nohash platforms, lets
move pte_user() helper out of pte-common.h to put it
together with other helpers.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As done for book3s/64, add necessary flags/defines in
book3s/32/pgtable.h and do not include pte-common.h
It allows in the meantime to remove all related hash
definitions from pte-common.h and to also remove
_PAGE_EXEC default as _PAGE_EXEC is defined on all
platforms except book3s/32.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
__P and __S flags are the same for all platform and should remain
as is in the future, so avoid duplication.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The following page flags in pte-common.h can be dropped:
_PAGE_ENDIAN is only used in mm/fsl_booke_mmu.c and is defined in
asm/nohash/32/pte-fsl-booke.h
_PAGE_4K_PFN is nowhere defined nor used
_PAGE_READ, _PAGE_WRITE and _PAGE_PTE are only defined and used
in book3s/64
The following page flags in book3s/64/pgtable.h can be dropped as
they are not used on this platform nor by common code.
_PAGE_NA, _PAGE_RO, _PAGE_USER and _PAGE_PSIZE
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
To reduce the complexity of flag_array, and allow the removal of
default 0 value of non existing flags, lets have one flag_array
table for each platform family with only the really existing flags.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Get rid of platform specific _PAGE_XXXX in powerpc common code and
use helpers instead.
mm/dump_linuxpagetables.c will be handled separately
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The 'access' parameter of hash_preload() is either 0 or _PAGE_EXEC.
Among the two versions of hash_preload(), only the PPC64 one is
doing something with this 'access' parameter.
In order to remove the use of _PAGE_EXEC outside platform code,
'access' parameter is replaced by 'is_exec' which will be either
true of false, and the PPC64 version of hash_preload() creates
the access flag based on 'is_exec'.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In order to avoid using generic _PAGE_XXX flags in powerpc
core functions, define helpers for all needed flags:
- pte_mkuser() and pte_mkprivileged() to set/unset and/or
unset/set _PAGE_USER and/or _PAGE_PRIVILEGED
- pte_hashpte() to check if _PAGE_HASHPTE is set.
- pte_ci() check if cache is inhibited (already existing on book3s/64)
- pte_exprotect() to protect against execution
- pte_exec() and pte_mkexec() to query and set page execution
- pte_mkpte() to set _PAGE_PTE flag.
- pte_hw_valid() to check _PAGE_PRESENT since pte_present does
something different on book3s/64.
On book3s/32 there is no exec protection, so pte_mkexec() and
pte_exprotect() are nops and pte_exec() returns always true.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In order to allow their use in nohash/32/pgtable.h, we have to move the
following helpers in nohash/[32:64]/pgtable.h:
- pte_mkwrite()
- pte_mkdirty()
- pte_mkyoung()
- pte_wrprotect()
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
book3s/32 doesn't define _PAGE_EXEC, so no need to use it.
All other platforms define _PAGE_EXEC so no need to check
it is not NUL when not book3s/32.
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In order to avoid multiple conversions, handover directly a
pgprot_t to map_kernel_page() as already done for radix.
Do the same for __ioremap_caller() and __ioremap_at().
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Set PAGE_KERNEL directly in the caller and do not rely on a
hack adding PAGE_KERNEL flags when _PAGE_PRESENT is not set.
As already done for PPC64, use pgprot_cache() helpers instead of
_PAGE_XXX flags in PPC32 ioremap() derived functions.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In many places, ioremap_prot() and __ioremap() can be replaced with
higher level functions like ioremap(), ioremap_coherent(),
ioremap_cache(), ioremap_wc() ...
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* Fix a livelock in dax_layout_busy_page() present since v4.18. The
lockup triggers when truncating an actively mapped huge page out of a
mapping pinned for direct-I/O.
* Fix mprotect() clobbers of _PAGE_DEVMAP. Broken since v4.5 mprotect()
clears this flag that is needed to communicate the liveness of device
pages to the get_user_pages() path.
-----BEGIN PGP SIGNATURE-----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=VXnU
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-fixes-4.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Dan writes:
"libnvdimm/dax 4.19-rc8
* Fix a livelock in dax_layout_busy_page() present since v4.18. The
lockup triggers when truncating an actively mapped huge page out of
a mapping pinned for direct-I/O.
* Fix mprotect() clobbers of _PAGE_DEVMAP. Broken since v4.5
mprotect() clears this flag that is needed to communicate the
liveness of device pages to the get_user_pages() path."
* tag 'libnvdimm-fixes-4.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
mm: Preserve _PAGE_DEVMAP across mprotect() calls
filesystem-dax: Fix dax_layout_busy_page() livelock
Other arches have ioremap_wt() to map IO areas write-through.
Implement it on PPC as well in order to avoid drivers using
__ioremap(_PAGE_WRITETHRU)
Also implement ioremap_coherent() to avoid drivers using
__ioremap(_PAGE_COHERENT)
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Live Partition Migrations require all the present CPUs to execute the
H_JOIN call, and hence rtas_ibm_suspend_me() onlines any offline CPUs
before initiating the migration for this purpose.
The commit 85a88cabad
("powerpc/pseries: Disable CPU hotplug across migrations")
disables any CPU-hotplug operations once all the offline CPUs are
brought online to prevent any further state change. Once the
CPU-Hotplug operation is disabled, the code assumes that all the CPUs
are online.
However, there is a minor window in rtas_ibm_suspend_me() between
onlining the offline CPUs and disabling CPU-Hotplug when a concurrent
CPU-offline operations initiated by the userspace can succeed thereby
nullifying the the aformentioned assumption. In this unlikely case
these offlined CPUs will not call H_JOIN, resulting in a system hang.
Fix this by verifying that all the present CPUs are actually online
after CPU-Hotplug has been disabled, failing which we restore the
state of the offline CPUs in rtas_ibm_suspend_me() and return an
-EBUSY.
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently on POWER9 SMT8 cores systems, in sysfs, we report the
shared_cache_map for L1 caches (both data and instruction) to be the
cpu-ids of the threads in SMT8 cores. This is incorrect since on
POWER9 SMT8 cores there are two groups of threads, each of which
shares its own L1 cache.
This patch addresses this by reporting the shared_cpu_map correctly in
sysfs for L1 caches.
Before the patch
/sys/devices/system/cpu/cpu0/cache/index0/shared_cpu_map : 000000ff
/sys/devices/system/cpu/cpu0/cache/index1/shared_cpu_map : 000000ff
/sys/devices/system/cpu/cpu1/cache/index0/shared_cpu_map : 000000ff
/sys/devices/system/cpu/cpu1/cache/index1/shared_cpu_map : 000000ff
After the patch
/sys/devices/system/cpu/cpu0/cache/index0/shared_cpu_map : 00000055
/sys/devices/system/cpu/cpu0/cache/index1/shared_cpu_map : 00000055
/sys/devices/system/cpu/cpu1/cache/index0/shared_cpu_map : 000000aa
/sys/devices/system/cpu/cpu1/cache/index1/shared_cpu_map : 000000aa
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
POWER9 SMT8 cores consist of two groups of threads, where threads in
each group shares L1-cache. The scheduler is not aware of this
distinction as the current sched-domain hierarchy has all the threads
of the core defined at the SMT domain.
SMT [Thread siblings of the SMT8 core]
DIE [CPUs in the same die]
NUMA [All the CPUs in the system]
Due to this, we can observe run-to-run variance when we run a
multi-threaded benchmark bound to a single core based on how the
scheduler spreads the software threads across the two groups in the
core.
We fix this in this patch by defining each group of threads which
share L1-cache to be the SMT level. The group of threads in the SMT8
core is defined to be the CACHE level. The sched-domain hierarchy
after this patch will be :
SMT [Thread siblings in the core that share L1 cache]
CACHE [Thread siblings that are in the SMT8 core]
DIE [CPUs in the same die]
NUMA [All the CPUs in the system]
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On IBM POWER9, the device tree exposes a property array identifed by
"ibm,thread-groups" which will indicate which groups of threads share
a particular set of resources.
As of today we only have one form of grouping identifying the group of
threads in the core that share the L1 cache, translation cache and
instruction data flow.
This patch adds helper functions to parse the contents of
"ibm,thread-groups" and populate a per-cpu variable to cache
information about siblings of each CPU that share the L1, traslation
cache and instruction data-flow.
It also defines a new global variable named "has_big_cores" which
indicates if the cores on this configuration have multiple groups of
threads that share L1 cache.
For each online CPU, it maintains a cpu_smallcore_mask, which
indicates the online siblings which share the L1-cache with it.
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If GCC is not built with glibc support then we must explicitly tell it
which register to use for TLS mode stack protector, otherwise it will
error out and the cc-option check will fail.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 6c1719942e ("powerpc/of: Remove useless register save/restore
when calling OF back") removed the saving of srr0 and srr1 when calling
into OpenFirmware. Commit e31aa453bb ("powerpc: Use LOAD_REG_IMMEDIATE
only for constants on 64-bit") did the same for rtas.
This means we don't need to save the extra stack space and can use
the common SWITCH_FRAME_SIZE.
There were already no users of _SRR0 and _SRR1 so we can remove them
too.
Link: https://github.com/linuxppc/linux/issues/83
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The powerpc mobility code may receive RTAS requests to perform PRRN
(Platform Resource Reassignment Notification) topology changes at any
time, including during LPAR migration operations.
In some configurations where the affinity of CPUs or memory is being
changed on that platform, the PRRN requests may apply or refer to
outdated information prior to the complete update of the device-tree.
This patch changes the duration for which topology updates are
suppressed during LPAR migrations from just the rtas_ibm_suspend_me()
/ 'ibm,suspend-me' call(s) to cover the entire migration_store()
operation to allow all changes to the device-tree to be applied prior
to accepting and applying any PRRN requests.
For tracking purposes, pr_info notices are added to the functions
start_topology_update() and stop_topology_update() of 'numa.c'.
Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ever since commit 15a3204d24 ("powerpc/64s: Set assembler machine type
to POWER4") we force -mpower4 to be passed to the assembler
irrespective of the CFLAGS used (for Book3s 64).
When building a powerpc64 kernel with clang, clang will not add -many
to the assembler flags, so any instructions that the compiler has
generated that are not available on power4 will cause an error:
/usr/bin/as -a64 -mppc64 -mlittle-endian -mpower8 \
-I ./arch/powerpc/include -I ./arch/powerpc/include/generated \
-I ./include -I ./arch/powerpc/include/uapi \
-I ./arch/powerpc/include/generated/uapi -I ./include/uapi \
-I ./include/generated/uapi -I arch/powerpc -I arch/powerpc \
-maltivec -mpower4 -o init/do_mounts.o /tmp/do_mounts-3b0a3d.s
/tmp/do_mounts-51ce54.s:748: Error: unrecognized opcode: `isel'
GCC does include -many, so the GCC driven gas call will succeed:
as -v -I ./arch/powerpc/include -I ./arch/powerpc/include/generated -I
./include -I ./arch/powerpc/include/uapi
-I ./arch/powerpc/include/generated/uapi -I ./include/uapi
-I ./include/generated/uapi -I arch/powerpc -I arch/powerpc
-a64 -mpower8 -many -mlittle -maltivec -mpower4 -o init/do_mounts.o
Note that isel is power7 and above for IBM CPUs. GCC only generates it
for Power9 and above, but the above test was run against the clang
generated assembly.
Peter Bergner explains:
When using -many -mpower4, gas will first try and find a matching
power4 mnemonic and failing that, it will then allow any valid
mnemonic that gas knows about. GCC's use of -many predates me
though.
IIRC, Alan looked at trying to remove it, but I forget why he
didn't. Could be either a gcc or gas issue at the time. I'm not sure
whether issue still exists or not. He and I have modified how gas
works internally a fair amount since he tried removing gcc use of
-many.
I will also note that when using -many, gas will choose the first
mnemonic that matches in the mnemonic table and we have (mostly)
sorted the table so that server mnemonics show up earlier in the
table than other mnemonics, so they'll be seen/chosen first.
By explicitly setting -many we can build with Clang and GCC while
retaining the -mpower4 option.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The variable 'aa_index' is defined as an unsigned value in
update_lmb_associativity_index(), but find_aa_index() may return -1
when dlpar_clone_property() fails. So change find_aa_index() to return
a bool, which indicates whether 'aa_index' was found or not.
Fixes: c05a5a4096 ("powerpc/pseries: Dynamic add entires to associativity lookup array")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Nathan Fontenot nfont@linux.vnet.ibm.com>
[mpe: Tweak changelog, rename is_found to just found]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Rather than mixing "if (state)" blocks and gotos, convert entirely to
"if (state)" blocks to make the state machine behaviour clearer.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The wait_state member of eeh_ops does not need to be platform
dependent; it's just logic around eeh_ops.get_state(). Therefore,
merge the two (slightly different!) platform versions into a new
function, eeh_wait_state() and remove the eeh_ops member.
While doing this, also correct:
* The wait logic, so that it never waits longer than max_wait.
* The wait logic, so that it never waits less than
EEH_STATE_MIN_WAIT_TIME.
* One call site where the result is treated like a bit field before
it's checked for negative error values.
* In pseries_eeh_get_state(), rename the "state" parameter to "delay"
because that's what it is.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently, eeh_pe_state_mark() marks a PE (and it's children) with a
state and then performs additional processing if that state included
EEH_PE_ISOLATED.
The state parameter is always a constant at the call site, so
rearrange eeh_pe_state_mark() into two functions and just call the
appropriate one at each site.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The function eeh_pe_state_mark_with_cfg() just performs the work of
eeh_pe_state_mark() and then, conditionally, the work of
eeh_pe_state_clear(). However it is only ever called with a constant
state such that the condition is always true, so replace it by direct
calls.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move the call to eeh_dev_to_pe() up, so that later it's clear that
"pe" isn't NULL.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Change the name of the fields in eeh_rmv_data to clarify their usage.
Change "edev_list" to "removed_vf_list" because it does not contain
generic edevs, but rather only edevs that contain virtual functions
(which need to be removed during recovery).
Similarly, change "removed" to "removed_dev_count" because it is a
count of any removed devices, not just those in the above list.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Instances of struct eeh_pe are placed in a tree structure using the
fields "child_list" and "child", so place these next to each other
in the definition.
The field "child" is a list entry, so remove the unnecessary and
misleading use of the list initializer, LIST_HEAD(), on it.
The eeh_dev struct contains two list entry fields, called "list" and
"rmv_list". Rename them to "entry" and "rmv_entry" and, as above, stop
initializing them with LIST_HEAD().
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Remove the unnecessary cast through void * on the first parameter and
remove the unused second parameter (always NULL).
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The 'bus' member of struct eeh_dev is assigned to once but never used,
so remove it.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently a flag, EEH_POSTPONED_PROBE, is used to prevent an incorrect
message "EEH: No capable adapters found" from being displayed during
the boot of powernv systems.
It is necessary because, on powernv, the call to eeh_probe_devices()
made from eeh_init() is too early and EEH can't yet be enabled. A
second call is made later from eeh_pnv_post_init(), which succeeds.
(On pseries, the first call succeeds because PCI devices are set up
early enough and no second call is made.)
This can be simplified by moving the early call to eeh_probe_devices()
from eeh_init() (where it's seen by both platforms) to
pSeries_final_fixup(), so that each platform only calls
eeh_probe_devices() once, at a point where it can succeed.
This is slightly later in the boot sequence, but but still early
enough and it is now in the same place in the sequence for both
platforms (the pcibios_fixup hook).
The display of the message can be cleaned up as well, by moving it
into eeh_probe_devices().
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
eeh_add_to_parent_pe() sometimes removes the EEH_PE_KEEP flag, but it
incorrectly removes it from pe->type, instead of pe->state.
However, rather than clearing it from the correct field, remove it.
Inspection of the code shows that it can't ever have had any effect
(even if it had been cleared from the correct field), because the
field is never tested after it is cleared by the statement in
question.
The clear statement was added by commit 807a827d4e ("powerpc/eeh:
Keep PE during hotplug"), but it didn't explain why it was necessary.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If a device is removed during EEH processing (either by a driver's
handler or as part of recovery), it can lead to a null dereference
in eeh_pe_report_edev().
To handle this, skip devices that have been removed.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If an error occurs during an unplug operation, it's possible for
eeh_dump_dev_log() to be called when edev->pdn is null, which
currently leads to dereferencing a null pointer.
Handle this by skipping the error log for those devices.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The boot wrapper is currently built with -Os. By building with O2 we
can meaningfully reduce the time decompressing the kernel.
I tested by comparing 10 runs of each option in Qemu and on hardware.
The kernel is compressed with KERNEL_XZ built with GCC 8.2.0-7ubuntu1.
The values are counts of the timebase.
Qemu TCG powernv Power8:
Os O2 O3
median 10221123889 6201518438 6568186825
stddev 1361267211 429090641 657930076
improvement 39.33% 35.74%
Palmetto Power8:
Os O2 O3
median 50279 50599 35790
stddev 992144533 627130655 623721078
improvement 36.79% 37.13%
Romulus Power9:
Os O2 O3
median 670312391 454733720 448881398
stddev 157569 107276 108760
improvement 32.16% 33.03%
TCG was quite noisy, with every few runs producing an outlier. Even so,
O2 is faster than O3. On hardware the numbers were less noisy and O3 is
slightly faster than O2.
The wrapper size increases when moving from Os. Comparing zImage.epapr
to the existing Os build using bloat-o-meter:
Before=43401, After=56837 (13KB), chg +30.96%
Before=43401, After=64305 (20KB), chg +48.16%
I chose O2 for a balance between Qemu and hardware speed up.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This will avoid auto-vectorisation when building with higher
optimisation levels.
We don't know if the machine can support VSX and even if it's present
it's probably not going to be enabled at this point in boot.
These flag were both added prior to GCC 4.6 which is the minimum
compiler version supported by upstream, thanks to Segher for the
details.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As of commit 10c77dba40 ("powerpc/boot: Fix build failure in 32-bit
boot wrapper") the opal code is hidden behind CONFIG_PPC64_BOOT_WRAPPER,
but the boot wrapper avoids include/linux, so it does not get the normal
Kconfig flags.
We can drop the guard entirely as in commit f8e8e69cea ("powerpc/boot:
Only build OPAL code when necessary") the makefile only includes opal.c
in the build if CONFIG_PPC64_BOOT_WRAPPER is set.
Fixes: 10c77dba40 ("powerpc/boot: Fix build failure in 32-bit boot wrapper")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently the wrapper is built without including anything in
$(src)/include/, which means there are no CONFIG_ symbols defined.
This means the platform specific serial drivers were never enabled.
We now copy the definitions into the boot directory, so any C file can
now include autoconf.h to depend on configuration options.
Fixes: 866bfc75f4 ("powerpc: conditionally compile platform-specific serial drivers")
Signed-off-by: Joel Stanley <joel@jms.id.au>
[mpe: Fix to use $(objtree) to find autoconf.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.
Also since commit f467c5640c ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:
...
One side effect of (and the main motivation for) this change is making
the following two definitions behave exactly the same:
config FOO
bool
config FOO
bool
default n
With this change, neither of these will generate a
'# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
That might make it clearer to people that a bare 'default n' is
redundant.
...
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently when we get an unknown RTAS event it prints the type as
"Unknown" and no other useful information. Add the raw type code to the
log message so that we have something to work off.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The powerpc kernel uses setjmp which causes a warning when building
with clang:
In file included from arch/powerpc/xmon/xmon.c:51:
./arch/powerpc/include/asm/setjmp.h:15:13: error: declaration of
built-in function 'setjmp' requires inclusion of the header <setjmp.h>
[-Werror,-Wbuiltin-requires-header]
extern long setjmp(long *);
^
./arch/powerpc/include/asm/setjmp.h:16:13: error: declaration of
built-in function 'longjmp' requires inclusion of the header <setjmp.h>
[-Werror,-Wbuiltin-requires-header]
extern void longjmp(long *, long);
^
This *is* the header and we're not using the built-in setjump but
rather the one in arch/powerpc/kernel/misc.S. As the compiler warning
does not make sense, it for the files where setjmp is used.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
[mpe: Move subdir-ccflags in xmon/Makefile to not clobber -Werror]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The "count < sizeof(struct os_area_db)" comparison is type promoted to
size_t so negative values of "count" are treated as very high values
and we accidentally return success instead of a negative error code.
This doesn't really change runtime much but it fixes a static checker
warning.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On a Power9 box we get a few screens full of these on boot. Drop
them to pr_debug.
[ 5.993645] nest_centaur6_imc performance monitor hardware support registered
[ 5.993728] nest_centaur7_imc performance monitor hardware support registered
[ 5.996510] core_imc performance monitor hardware support registered
[ 5.996569] nest_mba0_imc performance monitor hardware support registered
[ 5.996631] nest_mba1_imc performance monitor hardware support registered
[ 5.996685] nest_mba2_imc performance monitor hardware support registered
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Reviewed-by: Stewart Smith <stewart@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
instructions_to_print var is assigned value 16 and there is no
way to change it.
This patch replaces it by a constant.
Reviewed-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When two processes crash at the same time, we sometimes encounter
interleaving in the middle of a line:
init[1]: segfault (11) at 0 nip 0 lr 0 code 1
init[1]: code: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
init[74]: segfault (11) at 10a74 nip 1000c198 lr 100078c8 code 1 in sh[10000000+14000]
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
init[1]: code: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
init[74]: code: 90010024 bf61000c 91490a7c 3fa01002 3be00000 7d3e4b78 3bbd0c20 3b600000
init[74]: code: 3b9d0040 7c7fe02e 2f830000 419e0028 <89230000> 2f890000 41be001c 4b7f6e79
This patch fixes it by preparing complete lines in a buffer and
printing it at once.
Fixes: 88b0fe1757 ("powerpc: Add show_user_instructions()")
Reviewed-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Use seq_buf_printf() not seq_buf_puts() which doesn't NULL terminate]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As spotted by sparse:
arch/powerpc/kernel/process.c:1302:6: warning: symbol 'show_user_instructions' was not declared. Should it be static?
Fixes: 88b0fe1757 ("powerpc: Add show_user_instructions()")
Reviewed-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Split out of larger patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch fixes the following warnings, which are leftovers
from when __get_user() was replaced by probe_kernel_address().
arch/powerpc/kernel/process.c:1287:22: warning: incorrect type in argument 2 (different address spaces)
arch/powerpc/kernel/process.c:1287:22: expected void const *src
arch/powerpc/kernel/process.c:1287:22: got unsigned int [noderef] <asn:1>*<noident>
arch/powerpc/kernel/process.c:1319:21: warning: incorrect type in argument 2 (different address spaces)
arch/powerpc/kernel/process.c:1319:21: expected void const *src
arch/powerpc/kernel/process.c:1319:21: got unsigned int [noderef] <asn:1>*<noident>
Fixes: 7b051f665c ("powerpc: Use probe_kernel_address in show_instructions")
Reviewed-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Split out of larger patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Since the struct lsm_info table is not an initcall, we can just move it
into INIT_DATA like all the other tables.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Currently _PAGE_DEVMAP bit is not preserved in mprotect(2) calls. As a
result we will see warnings such as:
BUG: Bad page map in process JobWrk0013 pte:800001803875ea25 pmd:7624381067
addr:00007f0930720000 vm_flags:280000f9 anon_vma: (null) mapping:ffff97f2384056f0 index:0
file:457-000000fe00000030-00000009-000000ca-00000001_2001.fileblock fault:xfs_filemap_fault [xfs] mmap:xfs_file_mmap [xfs] readpage: (null)
CPU: 3 PID: 15848 Comm: JobWrk0013 Tainted: G W 4.12.14-2.g7573215-default #1 SLE12-SP4 (unreleased)
Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.01.00.0833.051120182255 05/11/2018
Call Trace:
dump_stack+0x5a/0x75
print_bad_pte+0x217/0x2c0
? enqueue_task_fair+0x76/0x9f0
_vm_normal_page+0xe5/0x100
zap_pte_range+0x148/0x740
unmap_page_range+0x39a/0x4b0
unmap_vmas+0x42/0x90
unmap_region+0x99/0xf0
? vma_gap_callbacks_rotate+0x1a/0x20
do_munmap+0x255/0x3a0
vm_munmap+0x54/0x80
SyS_munmap+0x1d/0x30
do_syscall_64+0x74/0x150
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
...
when mprotect(2) gets used on DAX mappings. Also there is a wide variety
of other failures that can result from the missing _PAGE_DEVMAP flag
when the area gets used by get_user_pages() later.
Fix the problem by including _PAGE_DEVMAP in a set of flags that get
preserved by mprotect(2).
Fixes: 69660fd797 ("x86, mm: introduce _PAGE_DEVMAP")
Fixes: ebd3119793 ("powerpc/mm: Add devmap support for ppc64")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This adds a KVM_PPC_NO_HASH flag to the flags field of the
kvm_ppc_smmu_info struct, and arranges for it to be set when
running as a nested hypervisor, as an unambiguous indication
to userspace that HPT guests are not supported. Reporting the
KVM_CAP_PPC_MMU_HASH_V3 capability as false could be taken as
indicating only that the new HPT features in ISA V3.0 are not
supported, leaving it ambiguous whether pre-V3.0 HPT features
are supported.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
With this, userspace can enable a KVM-HV guest to run nested guests
under it.
The administrator can control whether any nested guests can be run;
setting the "nested" module parameter to false prevents any guests
becoming nested hypervisors (that is, any attempt to enable the nested
capability on a guest will fail). Guests which are already nested
hypervisors will continue to be so.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This merges in the "ppc-kvm" topic branch of the powerpc tree to get a
series of commits that touch both general arch/powerpc code and KVM
code. These commits will be merged both via the KVM tree and the
powerpc tree.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This adds a list of valid shadow PTEs for each nested guest to
the 'radix' file for the guest in debugfs. This can be useful for
debugging.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
With this, the KVM-HV module can be loaded in a guest running under
KVM-HV, and if the hypervisor supports nested virtualization, this
guest can now act as a nested hypervisor and run nested guests.
This also adds some checks to inform userspace that HPT guests are not
supported by nested hypervisors (by returning false for the
KVM_CAP_PPC_MMU_HASH_V3 capability), and to prevent userspace from
configuring a guest to use HPT mode.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The hcall H_ENTER_NESTED takes two parameters: the address in L1 guest
memory of a hv_regs struct and the address of a pt_regs struct. The
hcall requests the L0 hypervisor to use the register values in these
structs to run a L2 guest and to return the exit state of the L2 guest
in these structs. These are in the endianness of the L1 guest, rather
than being always big-endian as is usually the case for PAPR
hypercalls.
This is convenient because it means that the L1 guest can pass the
address of the regs field in its kvm_vcpu_arch struct. This also
improves performance slightly by avoiding the need for two copies of
the pt_regs struct.
When reading/writing these structures, this patch handles the case
where the endianness of the L1 guest differs from that of the L0
hypervisor, by byteswapping the structures after reading and before
writing them back.
Since all the fields of the pt_regs are of the same type, i.e.,
unsigned long, we treat it as an array of unsigned longs. The fields
of struct hv_guest_state are not all the same, so its fields are
byteswapped individually.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
restore_hv_regs() is used to copy the hv_regs L1 wants to set to run the
nested (L2) guest into the vcpu structure. We need to sanitise these
values to ensure we don't let the L1 guest hypervisor do things we don't
want it to.
We don't let data address watchpoints or completed instruction address
breakpoints be set to match in hypervisor state.
We also don't let L1 enable features in the hypervisor facility status
and control register (HFSCR) for L2 which we have disabled for L1. That
is L2 will get the subset of features which the L0 hypervisor has
enabled for L1 and the features L1 wants to enable for L2. This could
mean we give L1 a hypervisor facility unavailable interrupt for a
facility it thinks it has enabled, however it shouldn't have enabled a
facility it itself doesn't have for the L2 guest.
We sanitise the registers when copying in the L2 hv_regs. We don't need
to sanitise when copying back the L1 hv_regs since these shouldn't be
able to contain invalid values as they're just what was copied out.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds a one-reg register identifier which can be used to read and
set the virtual PTCR for the guest. This register identifies the
address and size of the virtual partition table for the guest, which
contains information about the nested guests under this guest.
Migrating this value is the only extra requirement for migrating a
guest which has nested guests (assuming of course that the destination
host supports nested virtualization in the kvm-hv module).
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When running as a nested hypervisor, this avoids reading hypervisor
privileged registers (specifically HFSCR, LPIDR and LPCR) at startup;
instead reasonable default values are used. This also avoids writing
LPIDR in the single-vcpu entry/exit path.
Also, this removes the check for CPU_FTR_HVMODE in kvmppc_mmu_hv_init()
since its only caller already checks this.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This is only done at level 0, since only level 0 knows which physical
CPU a vcpu is running on. This does for nested guests what L0 already
did for its own guests, which is to flush the TLB on a pCPU when it
goes to run a vCPU there, and there is another vCPU in the same VM
which previously ran on this pCPU and has now started to run on another
pCPU. This is to handle the situation where the other vCPU touched
a mapping, moved to another pCPU and did a tlbiel (local-only tlbie)
on that new pCPU and thus left behind a stale TLB entry on this pCPU.
This introduces a limit on the the vcpu_token values used in the
H_ENTER_NESTED hcall -- they must now be less than NR_CPUS.
[paulus@ozlabs.org - made prev_cpu array be short[] to reduce
memory consumption.]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds code to call the H_TLB_INVALIDATE hypercall when running as
a guest, in the cases where we need to invalidate TLBs (or other MMU
caches) as part of managing the mappings for a nested guest. Calling
H_TLB_INVALIDATE lets the nested hypervisor inform the parent
hypervisor about changes to partition-scoped page tables or the
partition table without needing to do hypervisor-privileged tlbie
instructions.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When running a nested (L2) guest the guest (L1) hypervisor will use
the H_TLB_INVALIDATE hcall when it needs to change the partition
scoped page tables or the partition table which it manages. It will
use this hcall in the situations where it would use a partition-scoped
tlbie instruction if it were running in hypervisor mode.
The H_TLB_INVALIDATE hcall can invalidate different scopes:
Invalidate TLB for a given target address:
- This invalidates a single L2 -> L1 pte
- We need to invalidate any L2 -> L0 shadow_pgtable ptes which map the L2
address space which is being invalidated. This is because a single
L2 -> L1 pte may have been mapped with more than one pte in the
L2 -> L0 page tables.
Invalidate the entire TLB for a given LPID or for all LPIDs:
- Invalidate the entire shadow_pgtable for a given nested guest, or
for all nested guests.
Invalidate the PWC (page walk cache) for a given LPID or for all LPIDs:
- We don't cache the PWC, so nothing to do.
Invalidate the entire TLB, PWC and partition table for a given/all LPIDs:
- Here we re-read the partition table entry and remove the nested state
for any nested guest for which the first doubleword of the partition
table entry is now zero.
The H_TLB_INVALIDATE hcall takes as parameters the tlbie instruction
word (of which only the RIC, PRS and R fields are used), the rS value
(giving the lpid, where required) and the rB value (giving the IS, AP
and EPN values).
[paulus@ozlabs.org - adapted to having the partition table in guest
memory, added the H_TLB_INVALIDATE implementation, removed tlbie
instruction emulation, reworded the commit message.]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When a host (L0) page which is mapped into a (L1) guest is in turn
mapped through to a nested (L2) guest we keep a reverse mapping (rmap)
so that these mappings can be retrieved later.
Whenever we create an entry in a shadow_pgtable for a nested guest we
create a corresponding rmap entry and add it to the list for the
L1 guest memslot at the index of the L1 guest page it maps. This means
at the L1 guest memslot we end up with lists of rmaps.
When we are notified of a host page being invalidated which has been
mapped through to a (L1) guest, we can then walk the rmap list for that
guest page, and find and invalidate all of the corresponding
shadow_pgtable entries.
In order to reduce memory consumption, we compress the information for
each rmap entry down to 52 bits -- 12 bits for the LPID and 40 bits
for the guest real page frame number -- which will fit in a single
unsigned long. To avoid a scenario where a guest can trigger
unbounded memory allocations, we scan the list when adding an entry to
see if there is already an entry with the contents we need. This can
occur, because we don't ever remove entries from the middle of a list.
A struct nested guest rmap is a list pointer and an rmap entry;
----------------
| next pointer |
----------------
| rmap entry |
----------------
Thus the rmap pointer for each guest frame number in the memslot can be
either NULL, a single entry, or a pointer to a list of nested rmap entries.
gfn memslot rmap array
-------------------------
0 | NULL | (no rmap entry)
-------------------------
1 | single rmap entry | (rmap entry with low bit set)
-------------------------
2 | list head pointer | (list of rmap entries)
-------------------------
The final entry always has the lowest bit set and is stored in the next
pointer of the last list entry, or as a single rmap entry.
With a list of rmap entries looking like;
----------------- ----------------- -------------------------
| list head ptr | ----> | next pointer | ----> | single rmap entry |
----------------- ----------------- -------------------------
| rmap entry | | rmap entry |
----------------- -------------------------
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Consider a normal (L1) guest running under the main hypervisor (L0),
and then a nested guest (L2) running under the L1 guest which is acting
as a nested hypervisor. L0 has page tables to map the address space for
L1 providing the translation from L1 real address -> L0 real address;
L1
|
| (L1 -> L0)
|
----> L0
There are also page tables in L1 used to map the address space for L2
providing the translation from L2 real address -> L1 read address. Since
the hardware can only walk a single level of page table, we need to
maintain in L0 a "shadow_pgtable" for L2 which provides the translation
from L2 real address -> L0 real address. Which looks like;
L2 L2
| |
| (L2 -> L1) |
| |
----> L1 | (L2 -> L0)
| |
| (L1 -> L0) |
| |
----> L0 --------> L0
When a page fault occurs while running a nested (L2) guest we need to
insert a pte into this "shadow_pgtable" for the L2 -> L0 mapping. To
do this we need to:
1. Walk the pgtable in L1 memory to find the L2 -> L1 mapping, and
provide a page fault to L1 if this mapping doesn't exist.
2. Use our L1 -> L0 pgtable to convert this L1 address to an L0 address,
or try to insert a pte for that mapping if it doesn't exist.
3. Now we have a L2 -> L0 mapping, insert this into our shadow_pgtable
Once this mapping exists we can take rc faults when hardware is unable
to automatically set the reference and change bits in the pte. On these
we need to:
1. Check the rc bits on the L2 -> L1 pte match, and otherwise reflect
the fault down to L1.
2. Set the rc bits in the L1 -> L0 pte which corresponds to the same
host page.
3. Set the rc bits in the L2 -> L0 pte.
As we reuse a large number of functions in book3s_64_mmu_radix.c for
this we also needed to refactor a number of these functions to take
an lpid parameter so that the correct lpid is used for tlb invalidations.
The functionality however has remained the same.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we are running as a nested hypervisor, we use a hypercall to
enter the guest rather than code in book3s_hv_rmhandlers.S. This means
that the hypercall handlers listed in hcall_real_table never get called.
There are some hypercalls that are handled there and not in
kvmppc_pseries_do_hcall(), which therefore won't get processed for
a nested guest.
To fix this, we add cases to kvmppc_pseries_do_hcall() to handle those
hypercalls, with the following exceptions:
- The HPT hypercalls (H_ENTER, H_REMOVE, etc.) are not handled because
we only support radix mode for nested guests.
- H_CEDE has to be handled specially because the cede logic in
kvmhv_run_single_vcpu assumes that it has been processed by the time
that kvmhv_p9_guest_entry() returns. Therefore we put a special
case for H_CEDE in kvmhv_p9_guest_entry().
For the XICS hypercalls, if real-mode processing is enabled, then the
virtual-mode handlers assume that they are being called only to finish
up the operation. Therefore we turn off the real-mode flag in the XICS
code when running as a nested hypervisor.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds code to call the H_IPI and H_EOI hypercalls when we are
running as a nested hypervisor (i.e. without the CPU_FTR_HVMODE cpu
feature) and we would otherwise access the XICS interrupt controller
directly or via an OPAL call.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds a new hypercall, H_ENTER_NESTED, which is used by a nested
hypervisor to enter one of its nested guests. The hypercall supplies
register values in two structs. Those values are copied by the level 0
(L0) hypervisor (the one which is running in hypervisor mode) into the
vcpu struct of the L1 guest, and then the guest is run until an
interrupt or error occurs which needs to be reported to L1 via the
hypercall return value.
Currently this assumes that the L0 and L1 hypervisors are the same
endianness, and the structs passed as arguments are in native
endianness. If they are of different endianness, the version number
check will fail and the hcall will be rejected.
Nested hypervisors do not support indep_threads_mode=N, so this adds
code to print a warning message if the administrator has set
indep_threads_mode=N, and treat it as Y.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This starts the process of adding the code to support nested HV-style
virtualization. It defines a new H_SET_PARTITION_TABLE hypercall which
a nested hypervisor can use to set the base address and size of a
partition table in its memory (analogous to the PTCR register).
On the host (level 0 hypervisor) side, the H_SET_PARTITION_TABLE
hypercall from the guest is handled by code that saves the virtual
PTCR value for the guest.
This also adds code for creating and destroying nested guests and for
reading the partition table entry for a nested guest from L1 memory.
Each nested guest has its own shadow LPID value, different in general
from the LPID value used by the nested hypervisor to refer to it. The
shadow LPID value is allocated at nested guest creation time.
Nested hypervisor functionality is only available for a radix guest,
which therefore means a radix host on a POWER9 (or later) processor.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
kvmppc_unmap_pte() does a sequence of operations that are open-coded in
kvm_unmap_radix(). This extends kvmppc_unmap_pte() a little so that it
can be used by kvm_unmap_radix(), and makes kvm_unmap_radix() call it.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The radix page fault handler accounts for all cases, including just
needing to insert a pte. This breaks it up into separate functions for
the two main cases; setting rc and inserting a pte.
This allows us to make the setting of rc and inserting of a pte
generic for any pgtable, not specific to the one for this guest.
[paulus@ozlabs.org - reduced diffs from previous code]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
kvmppc_mmu_radix_xlate() is used to translate an effective address
through the process tables. The process table and partition tables have
identical layout. Exploit this fact to make the kvmppc_mmu_radix_xlate()
function able to translate either an effective address through the
process tables or a guest real address through the partition tables.
[paulus@ozlabs.org - reduced diffs from previous code]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When destroying a VM we return the LPID to the pool, however we never
zero the partition table entry. This is instead done when we reallocate
the LPID.
Zero the partition table entry on VM teardown before returning the LPID
to the pool. This means if we were running as a nested hypervisor the
real hypervisor could use this to determine when it can free resources.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When the 'regs' field was added to struct kvm_vcpu_arch, the code
was changed to use several of the fields inside regs (e.g., gpr, lr,
etc.) but not the ccr field, because the ccr field in struct pt_regs
is 64 bits on 64-bit platforms, but the cr field in kvm_vcpu_arch is
only 32 bits. This changes the code to use the regs.ccr field
instead of cr, and changes the assembly code on 64-bit platforms to
use 64-bit loads and stores instead of 32-bit ones.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds a file called 'radix' in the debugfs directory for the
guest, which when read gives all of the valid leaf PTEs in the
partition-scoped radix tree for a radix guest, in human-readable
format. It is analogous to the existing 'htab' file which dumps
the HPT entries for a HPT guest.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently the code for handling hypervisor instruction page faults
passes 0 for the flags indicating the type of fault, which is OK in
the usual case that the page is not mapped in the partition-scoped
page tables. However, there are other causes for hypervisor
instruction page faults, such as not being to update a reference
(R) or change (C) bit. The cause is indicated in bits in HSRR1,
including a bit which indicates that the fault is due to not being
able to write to a page (for example to update an R or C bit).
Not handling these other kinds of faults correctly can lead to a
loop of continual faults without forward progress in the guest.
In order to handle these faults better, this patch constructs a
"DSISR-like" value from the bits which DSISR and SRR1 (for a HISI)
have in common, and passes it to kvmppc_book3s_hv_page_fault() so
that it knows what caused the fault.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This creates an alternative guest entry/exit path which is used for
radix guests on POWER9 systems when we have indep_threads_mode=Y. In
these circumstances there is exactly one vcpu per vcore and there is
no coordination required between vcpus or vcores; the vcpu can enter
the guest without needing to synchronize with anything else.
The new fast path is implemented almost entirely in C in book3s_hv.c
and runs with the MMU on until the guest is entered. On guest exit
we use the existing path until the point where we are committed to
exiting the guest (as distinct from handling an interrupt in the
low-level code and returning to the guest) and we have pulled the
guest context from the XIVE. At that point we check a flag in the
stack frame to see whether we came in via the old path and the new
path; if we came in via the new path then we go back to C code to do
the rest of the process of saving the guest context and restoring the
host context.
The C code is split into separate functions for handling the
OS-accessible state and the hypervisor state, with the idea that the
latter can be replaced by a hypercall when we implement nested
virtualization.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[mpe: Fix CONFIG_ALTIVEC=n build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently kvmppc_handle_exit_hv() is called with the vcore lock held
because it is called within a for_each_runnable_thread loop.
However, we already unlock the vcore within kvmppc_handle_exit_hv()
under certain circumstances, and this is safe because (a) any vcpus
that become runnable and are added to the runnable set by
kvmppc_run_vcpu() have their vcpu->arch.trap == 0 and can't actually
run in the guest (because the vcore state is VCORE_EXITING), and
(b) for_each_runnable_thread is safe against addition or removal
of vcpus from the runnable set.
Therefore, in order to simplify things for following patches, let's
drop the vcore lock in the for_each_runnable_thread loop, so
kvmppc_handle_exit_hv() gets called without the vcore lock held.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds a parameter to __kvmppc_save_tm and __kvmppc_restore_tm
which allows the caller to indicate whether it wants the nonvolatile
register state to be preserved across the call, as required by the C
calling conventions. This parameter being non-zero also causes the
MSR bits that enable TM, FP, VMX and VSX to be preserved. The
condition register and DSCR are now always preserved.
With this, kvmppc_save_tm_hv and kvmppc_restore_tm_hv can be called
from C code provided the 3rd parameter is non-zero. So that these
functions can be called from modules, they now include code to set
the TOC pointer (r2) on entry, as they can call other built-in C
functions which will assume the TOC to have been set.
Also, the fake suspend code in kvmppc_save_tm_hv is modified here to
assume that treclaim in fake-suspend state does not modify any registers,
which is the case on POWER9. This enables the code to be simplified
quite a bit.
_kvmppc_save_tm_pr and _kvmppc_restore_tm_pr become much simpler with
this change, since they now only need to save and restore TAR and pass
1 for the 3rd argument to __kvmppc_{save,restore}_tm.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This streamlines the first part of the code that handles a hypervisor
interrupt that occurred in the guest. With this, all of the real-mode
handling that occurs is done before the "guest_exit_cont" label; once
we get to that label we are committed to exiting to host virtual mode.
Thus the machine check and HMI real-mode handling is moved before that
label.
Also, the code to handle external interrupts is moved out of line, as
is the code that calls kvmppc_realmode_hmi_handler().
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This pulls out the assembler code that is responsible for saving and
restoring the PMU state for the host and guest into separate functions
so they can be used from an alternate entry path. The calling
convention is made compatible with C.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This is based on a patch by Suraj Jitindar Singh.
This moves the code in book3s_hv_rmhandlers.S that generates an
external, decrementer or privileged doorbell interrupt just before
entering the guest to C code in book3s_hv_builtin.c. This is to
make future maintenance and modification easier. The algorithm
expressed in the C code is almost identical to the previous
algorithm.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This removes code that clears the external interrupt pending bit in
the pending_exceptions bitmap. This is left over from an earlier
iteration of the code where this bit was set when an escalation
interrupt arrived in order to wake the vcpu from cede. Currently
we set the vcpu->arch.irq_pending flag instead for this purpose.
Therefore there is no need to do anything with the pending_exceptions
bitmap.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently we use two bits in the vcpu pending_exceptions bitmap to
indicate that an external interrupt is pending for the guest, one
for "one-shot" interrupts that are cleared when delivered, and one
for interrupts that persist until cleared by an explicit action of
the OS (e.g. an acknowledge to an interrupt controller). The
BOOK3S_IRQPRIO_EXTERNAL bit is used for one-shot interrupt requests
and BOOK3S_IRQPRIO_EXTERNAL_LEVEL is used for persisting interrupts.
In practice BOOK3S_IRQPRIO_EXTERNAL never gets used, because our
Book3S platforms generally, and pseries in particular, expect
external interrupt requests to persist until they are acknowledged
at the interrupt controller. That combined with the confusion
introduced by having two bits for what is essentially the same thing
makes it attractive to simplify things by only using one bit. This
patch does that.
With this patch there is only BOOK3S_IRQPRIO_EXTERNAL, and by default
it has the semantics of a persisting interrupt. In order to avoid
breaking the ABI, we introduce a new "external_oneshot" flag which
preserves the behaviour of the KVM_INTERRUPT ioctl with the
KVM_INTERRUPT_SET argument.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When doing nested virtualization, it is only necessary to do the
transactional memory hypervisor assist at level 0, that is, when
we are in hypervisor mode. Nested hypervisors can just use the TM
facilities as architected. Therefore we should clear the
CPU_FTR_P9_TM_HV_ASSIST bit when we are not in hypervisor mode,
along with the CPU_FTR_HVMODE bit.
Doing this will not change anything at this stage because the only
code that tests CPU_FTR_P9_TM_HV_ASSIST is in HV KVM, which currently
can only be used when when CPU_FTR_HVMODE is set.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The kvmppc_gpa_to_ua() helper itself takes care of the permission
bits in the TCE and yet every single caller removes them.
This changes semantics of kvmppc_gpa_to_ua() so it takes TCEs
(which are GPAs + TCE permission bits) to make the callers simpler.
This should cause no behavioural change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
At the moment if the PUT_TCE{_INDIRECT} handlers fail to update
the hardware tables, we print a warning once, clear the entry and
continue. This is so as at the time the assumption was that if
a VFIO device is hotplugged into the guest, and the userspace replays
virtual DMA mappings (i.e. TCEs) to the hardware tables and if this fails,
then there is nothing useful we can do about it.
However the assumption is not valid as these handlers are not called for
TCE replay (VFIO ioctl interface is used for that) and these handlers
are for new TCEs.
This returns an error to the guest if there is a request which cannot be
processed. By now the only possible failure must be H_TOO_HARD.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The userspace can request an arbitrary supported page size for a DMA
window and this works fine as long as the mapped memory is backed with
the pages of the same or bigger size; if this is not the case,
mm_iommu_ua_to_hpa{_rm}() fail and tables do not populated with
dangerously incorrect TCEs.
However since it is quite easy to misconfigure the KVM and we do not do
reverts to all changes made to TCE tables if an error happens in a middle,
we better do the acceptable page size validation before we even touch
the tables.
This enhances kvmppc_tce_validate() to check the hardware IOMMU page sizes
against the preregistered memory page sizes.
Since the new check uses real/virtual mode helpers, this renames
kvmppc_tce_validate() to kvmppc_rm_tce_validate() to handle the real mode
case and mirrors it for the virtual mode under the old name. The real
mode handler is not used for the virtual mode as:
1. it uses _lockless() list traversing primitives instead of RCU;
2. realmode's mm_iommu_ua_to_hpa_rm() uses vmalloc_to_phys() which
virtual mode does not have to use and since on POWER9+radix only virtual
mode handlers actually work, we do not want to slow down that path even
a bit.
This removes EXPORT_SYMBOL_GPL(kvmppc_tce_validate) as the validators
are static now.
From now on the attempts on mapping IOMMU pages bigger than allowed
will result in KVM exit.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[mpe: Fix KVM_HV=n build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Now that the 68k Mac port has adopted the via-pmu driver, the same RTC
code can be shared between m68k and powerpc. Replace duplicated code in
arch/powerpc and arch/m68k with common RTC accessors for Cuda and PMU.
Drop the problematic WARN_ON which was introduced in commit 22db552b50
("powerpc/powermac: Fix rtc read/write functions").
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Four regression fixes.
A fix for a change to lib/xz which broke our zImage loader when building with XZ
compression. OK'ed by Herbert who merged the original patch.
The recent fix we did to avoid patching __init text broke some 32-bit machines,
fix that.
Our show_user_instructions() could be tricked into printing kernel memory, add a
check to avoid that.
And a fix for a change to our NUMA initialisation logic, which causes crashes in
some kdump configurations.
Thanks to:
Christophe Leroy, Hari Bathini, Jann Horn, Joel Stanley, Meelis Roos, Murilo
Opsfelder Araujo, Srikar Dronamraju.
-----BEGIN PGP SIGNATURE-----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=FxNJ
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.19-4' of https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Michael writes:
"powerpc fixes for 4.19 #4
Four regression fixes.
A fix for a change to lib/xz which broke our zImage loader when
building with XZ compression. OK'ed by Herbert who merged the
original patch.
The recent fix we did to avoid patching __init text broke some 32-bit
machines, fix that.
Our show_user_instructions() could be tricked into printing kernel
memory, add a check to avoid that.
And a fix for a change to our NUMA initialisation logic, which causes
crashes in some kdump configurations.
Thanks to:
Christophe Leroy, Hari Bathini, Jann Horn, Joel Stanley, Meelis
Roos, Murilo Opsfelder Araujo, Srikar Dronamraju."
* tag 'powerpc-4.19-4' of https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/numa: Skip onlining a offline node in kdump path
powerpc: Don't print kernel instructions in show_user_instructions()
powerpc/lib: fix book3s/32 boot failure due to code patching
lib/xz: Put CRC32_POLY_LE in xz_private.h
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJbtxXyAAoJEL/70l94x66D52kH/jEbBo/jz9Jx2bnbxYkG1YzO
cIpIRjbRcOKVFNGxjStlJ0PedQBWAfPQl+SywRfqwiSlOOt/yo0lZ5ZewENR2TxO
CLQC/OnV/5SU7BJvbsKgH9tc+Wp9X55wBUEalfcvG/knFlmR+eK/7TwTS+hv/U21
uYKRnGfz5AGfdmB9FyCn0blkPNnFaQ8KB+y+INZTkB+YZzNsybow230FRPs22fjX
HGeJ7gngah50M5gxDW+YPPNXFhs36x2hsyQXBN9TPxLPHoxTsRRoeqx2nl/UvA+e
LXZWg8/UAzXFO/fKVHkJX4jSnCDr2W7HYGNyLPtXFPWhcOelP1h9uHrfuX+fxA4=
=UNUo
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Paolo writes:
"KVM changes for 4.19-rc7
x86 and PPC bugfixes, mostly introduced in 4.19-rc1."
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: nVMX: fix entry with pending interrupt if APICv is enabled
KVM: VMX: hide flexpriority from guest when disabled at the module level
KVM: VMX: check for existence of secondary exec controls before accessing
KVM: PPC: Book3S HV: Avoid crash from THP collapse during radix page fault
KVM: x86: fix L1TF's MMIO GFN calculation
tools/kvm_stat: cut down decimal places in update interval dialog
KVM: nVMX: Fix emulation of VM_ENTRY_LOAD_BNDCFGS
KVM: x86: Do not use kvm_x86_ops->mpx_supported() directly
KVM: nVMX: Do not expose MPX VMX controls when guest MPX disabled
KVM: x86: never trap MSR_KERNEL_GS_BASE
Recently we implemented show_user_instructions() which dumps the code
around the NIP when a user space process dies with an unhandled
signal. This was modelled on the x86 code, and we even went so far as
to implement the exact same bug, namely that if the user process
crashed with its NIP pointing into the kernel we will dump kernel text
to dmesg. eg:
bad-bctr[2996]: segfault (11) at c000000000010000 nip c000000000010000 lr 12d0b0894 code 1
bad-bctr[2996]: code: fbe10068 7cbe2b78 7c7f1b78 fb610048 38a10028 38810020 fb810050 7f8802a6
bad-bctr[2996]: code: 3860001c f8010080 48242371 60000000 <7c7b1b79> 4082002c e8010080 eb610048
This was discovered on x86 by Jann Horn and fixed in commit
342db04ae7 ("x86/dumpstack: Don't dump kernel memory based on usermode RIP").
Fix it by checking the adjusted NIP value (pc) and number of
instructions against USER_DS, and bail if we fail the check, eg:
bad-bctr[2969]: segfault (11) at c000000000010000 nip c000000000010000 lr 107930894 code 1
bad-bctr[2969]: Bad NIP, not dumping instructions.
Fixes: 88b0fe1757 ("powerpc: Add show_user_instructions()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This adds a mode where the vcore scheduling logic in HV KVM limits itself
to scheduling only virtual cores from the same VM on any given physical
core. This is enabled via a new module parameter on the kvm-hv module
called "one_vm_per_core". For this to work on POWER9, it is necessary to
set indep_threads_mode=N. (On POWER8, hardware limitations mean that KVM
is never in independent threads mode, regardless of the indep_threads_mode
setting.)
Thus the settings needed for this to work are:
1. The host is in SMT1 mode.
2. On POWER8, the host is not in 2-way or 4-way static split-core mode.
3. On POWER9, the indep_threads_mode parameter is N.
4. The one_vm_per_core parameter is Y.
With these settings, KVM can run up to 4 vcpus on a core at the same
time on POWER9, or up to 8 vcpus on POWER8 (depending on the guest
threading mode), and will ensure that all of the vcpus belong to the
same VM.
This is intended for use in security-conscious settings where users are
concerned about possible side-channel attacks between threads which could
perhaps enable one VM to attack another VM on the same core, or the host.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
When an OS (currently only classic Mac OS) is running in KVM-PR and makes a
linked jump from code with split hack addressing enabled into code that does
not, LR is not correctly updated and reflects the previously munged PC.
To fix this, this patch undoes the address munge when exiting split
hack mode so that code relying on LR being a proper address will now
execute. This does not affect OS X or other operating systems running
on KVM-PR.
Signed-off-by: Cameron Kaiser <spectre@floodgap.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Local radix TLB flush operations that operate on congruence classes
have explicit ERAT flushes for POWER9. The process scoped LPID flush
did not have a flush, so add it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
PPC_INVALIDATE_ERAT is slbia IH=7 which is a new variant introduced
with POWER9, and the result is undefined on earlier CPUs.
Commits 7b9f71f974 ("powerpc/64s: POWER9 machine check handler") and
d4748276ae ("powerpc/64s: Improve local TLB flush for boot and MCE on
POWER9") caused POWER7/8 code to use this instruction. Remove it. An
ERAT flush can be made by invalidatig the SLB, but before POWER9 that
requires a flush and rebolt.
Fixes: 7b9f71f974 ("powerpc/64s: POWER9 machine check handler")
Fixes: d4748276ae ("powerpc/64s: Improve local TLB flush for boot and MCE on POWER9")
Cc: stable@vger.kernel.org # v4.11+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If CONFIG_PPC_WATCHDOG is enabled we always cap the decrementer to
0x7fffffff:
if (IS_ENABLED(CONFIG_PPC_WATCHDOG))
set_dec(0x7fffffff);
else
set_dec(decrementer_max);
If there are no future events, we don't reprogram the decrementer
after this and we end up with 0x7fffffff even on a large decrementer
capable system.
As suggested by Nick, add a set_state_oneshot_stopped callback
so we program the decrementer with decrementer_max if there are
no future events.
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We currently cap the decrementer clockevent at 4 seconds, even on systems
with large decrementer support. Fix this by converting the code to use
clockevents_register_device() which calculates the upper bound based on
the max_delta passed in.
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This threshold is no longer used now that all invalidates issue a single
ATSD to each active NPU.
Signed-off-by: Mark Hairgrove <mhairgrove@nvidia.com>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Prior to this change only two types of ATSDs were issued to the NPU:
invalidates targeting a single page and invalidates targeting the whole
address space. The crossover point happened at the configurable
atsd_threshold which defaulted to 2M. Invalidates that size or smaller
would issue per-page invalidates for the whole range.
The NPU supports more invalidation sizes however: 64K, 2M, 1G, and all.
These invalidates target addresses aligned to their size. 2M is a common
invalidation size for GPU-enabled applications because that is a GPU
page size, so reducing the number of invalidates by 32x in that case is a
clear improvement.
ATSD latency is high in general so now we always issue a single invalidate
rather than multiple. This will over-invalidate in some cases, but for any
invalidation size over 2M it matches or improves the prior behavior.
There's also an improvement for single-page invalidates since the prior
version issued two invalidates for that case instead of one.
With this change all issued ATSDs now perform a flush, so the flush
parameter has been removed from all the helpers.
To show the benefit here are some performance numbers from a
microbenchmark which creates a 1G allocation then uses mprotect with
PROT_NONE to trigger invalidates in strides across the allocation.
One NPU (1 GPU):
mprotect rate (GB/s)
Stride Before After Speedup
64K 5.3 5.6 5%
1M 39.3 57.4 46%
2M 49.7 82.6 66%
4M 286.6 285.7 0%
Two NPUs (6 GPUs):
mprotect rate (GB/s)
Stride Before After Speedup
64K 6.5 7.4 13%
1M 33.4 67.9 103%
2M 38.7 93.1 141%
4M 356.7 354.6 -1%
Anything over 2M is roughly the same as before since both cases issue a
single ATSD.
Signed-off-by: Mark Hairgrove <mhairgrove@nvidia.com>
Reviewed-By: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There are two types of ATSDs issued to the NPU: invalidates targeting a
specific virtual address and invalidates targeting the whole address
space. In both cases prior to this change, the sequence was:
for each NPU
- Write the target address to the XTS_ATSD_AVA register
- EIEIO
- Write the launch value to issue the ATSD
First, a target address is not required when invalidating the whole
address space, so that write and the EIEIO have been removed. The AP
(size) field in the launch is not needed either.
Second, for per-address invalidates the above sequence is inefficient in
the common case of multiple NPUs because an EIEIO is issued per NPU. This
unnecessarily forces the launches of later ATSDs to be ordered with the
launches of earlier ones. The new sequence only issues a single EIEIO:
for each NPU
- Write the target address to the XTS_ATSD_AVA register
EIEIO
for each NPU
- Write the launch value to issue the ATSD
Performance results were gathered using a microbenchmark which creates a
1G allocation then uses mprotect with PROT_NONE to trigger invalidates in
strides across the allocation.
With only a single NPU active (one GPU) the difference is in the noise for
both types of invalidates (+/-1%).
With two NPUs active (on a 6-GPU system) the effect is more noticeable:
mprotect rate (GB/s)
Stride Before After Speedup
64K 5.9 6.5 10%
1M 31.2 33.4 7%
2M 36.3 38.7 7%
4M 322.6 356.7 11%
Signed-off-by: Mark Hairgrove <mhairgrove@nvidia.com>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Clean up the leftover of commit f2910f0e68 ("powerpc: remove old
GCC version checks").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When enumerating page size definitions to check hardware support,
we construct a constant which is (1U << (def->shift - 10)).
However, the array of page size definitions is only initalised for
various MMU_PAGE_* constants, so it contains a number of 0-initialised
elements with def->shift == 0. This means we end up shifting by a
very large number, which gives the following UBSan splat:
================================================================================
UBSAN: Undefined behaviour in /home/dja/dev/linux/linux/arch/powerpc/mm/tlb_nohash.c:506:21
shift exponent 4294967286 is too large for 32-bit type 'unsigned int'
CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc3-00045-ga604f927b012-dirty #6
Call Trace:
[c00000000101bc20] [c000000000a13d54] .dump_stack+0xa8/0xec (unreliable)
[c00000000101bcb0] [c0000000004f20a8] .ubsan_epilogue+0x18/0x64
[c00000000101bd30] [c0000000004f2b10] .__ubsan_handle_shift_out_of_bounds+0x110/0x1a4
[c00000000101be20] [c000000000d21760] .early_init_mmu+0x1b4/0x5a0
[c00000000101bf10] [c000000000d1ba28] .early_setup+0x100/0x130
[c00000000101bf90] [c000000000000528] start_here_multiplatform+0x68/0x80
================================================================================
Fix this by first checking if the element exists (shift != 0) before
constructing the constant.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 71d29f43b6 ("KVM: PPC: Book3S HV: Don't use compound_order to
determine host mapping size", 2018-09-11) added a call to
__find_linux_pte() and a dereference of the returned PTE pointer to the
radix page fault path in the common case where the page is normal
system memory. Previously, __find_linux_pte() was only called for
mappings to physical addresses which don't have a page struct (e.g.
memory-mapped I/O) or where the page struct is marked as reserved
memory.
This exposes us to the possibility that the returned PTE pointer
could be NULL, for example in the case of a concurrent THP collapse
operation. Dereferencing the returned NULL pointer causes a host
crash.
To fix this, we check for NULL, and if it is NULL, we retry the
operation by returning to the guest, with the expectation that it
will generate the same page fault again (unless of course it has
been fixed up by another CPU in the meantime).
Fixes: 71d29f43b6 ("KVM: PPC: Book3S HV: Don't use compound_order to determine host mapping size")
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Rework the defintion of struct siginfo so that the array padding
struct siginfo to SI_MAX_SIZE can be placed in a union along side of
the rest of the struct siginfo members. The result is that we no
longer need the __ARCH_SI_PREAMBLE_SIZE or SI_PAD_SIZE definitions.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Add call to early_memtest() so that kernel compiled with
CONFIG_MEMTEST really perform memtest at startup when requested
via 'memtest' boot parameter.
Tested-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When a process allocates a hugepage, the following leak is
reported by kmemleak. This is a false positive which is
due to the pointer to the table being stored in the PGD
as physical memory address and not virtual memory pointer.
unreferenced object 0xc30f8200 (size 512):
comm "mmap", pid 374, jiffies 4872494 (age 627.630s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<e32b68da>] huge_pte_alloc+0xdc/0x1f8
[<9e0df1e1>] hugetlb_fault+0x560/0x8f8
[<7938ec6c>] follow_hugetlb_page+0x14c/0x44c
[<afbdb405>] __get_user_pages+0x1c4/0x3dc
[<b8fd7cd9>] __mm_populate+0xac/0x140
[<3215421e>] vm_mmap_pgoff+0xb4/0xb8
[<c148db69>] ksys_mmap_pgoff+0xcc/0x1fc
[<4fcd760f>] ret_from_syscall+0x0/0x38
See commit a984506c54 ("powerpc/mm: Don't report PUDs as
memory leaks when using kmemleak") for detailed explanation.
To fix that, this patch tells kmemleak to ignore the allocated
hugepage table.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The comments in this file don't conform to the coding style so take
them to "Comment Formatting Re-Education Camp".
Suggested-by: Michael "Camp Drill Sergeant" Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Neuling <mikey@neuling.org>
[mpe: Reflow some comments and add full stops, fix spelling of Sergeant.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
for 64bit configs which use for CONFIG_LOG_BUF_SHIFT the same
or higher value than the default (currently 17).
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The code in machine_check_exception excludes 64s hvmode when
incrementing the MCE counter only to call opal_machine_check to
increment it specifically for this case.
Remove the exclusion and special case.
Fixes: a43c159042 ("powerpc/pseries: Flush SLB contents on SLB MCE
errors.")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On a kernel TM Bad thing program exception, the Machine State Register
(MSR) is not being properly displayed. The exception code dumps a 32-bits
value but MSR is a 64 bits register for all platforms that have HTM
enabled.
This patch dumps the MSR value as a 64-bits value instead of 32 bits. In
order to do so, the 'reason' variable could not be used, since it trimmed
MSR to 32-bits (int).
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently msr_tm_active() is a wrapper around MSR_TM_ACTIVE() if
CONFIG_PPC_TRANSACTIONAL_MEM is set, or it is just a function that
returns false if CONFIG_PPC_TRANSACTIONAL_MEM is not set.
This function is not necessary, since MSR_TM_ACTIVE() just do the same and
could be used, removing the dualism and simplifying the code.
This patchset remove every instance of msr_tm_active() and replaced it
by MSR_TM_ACTIVE().
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There is a mismatch between function pnv_platform_error_reboot() definition
and declaration regarding function modifiers. In the declaration part, it
contains the function attribute __noreturn, while function definition
itself lacks it.
This was reported by sparse tool as an error:
arch/powerpc/platforms/powernv/opal.c:538:6: error: symbol 'pnv_platform_error_reboot' redeclared with different type (originally declared at arch/powerpc/platforms/powernv/powernv.h:11) - different modifiers
I checked and the function is already being considered as being 'noreturn'
by the compiler, thus, I understand this patch does not change any code
being generated.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This is a patch that adds support for PTRACE_SYSEMU ptrace request in
PowerPC architecture.
When ptrace(PTRACE_SYSEMU, ...) request is called, it will be handled by
the arch independent function ptrace_resume(), which will tag the task with
the TIF_SYSCALL_EMU flag. This flag needs to be handled from a platform
dependent point of view, which is what this patch does.
This patch adds this task's flag as part of the _TIF_SYSCALL_DOTRACE, which
is the MACRO that is used to trace syscalls at entrance/exit.
Since TIF_SYSCALL_EMU is now part of _TIF_SYSCALL_DOTRACE, if the task has
_TIF_SYSCALL_DOTRACE set, it will hit do_syscall_trace_enter() at syscall
entrance and do_syscall_trace_leave() at syscall leave.
do_syscall_trace_enter() needs to handle the TIF_SYSCALL_EMU flag properly,
which will interrupt the syscall executing if TIF_SYSCALL_EMU is set. The
output values should not be changed, i.e. the return value (r3) should
contain the original syscall argument on exit.
With this flag set, the syscall is not executed fundamentally, because
do_syscall_trace_enter() is returning -1 which is bigger than NR_syscall,
thus, skipping the syscall execution and exiting userspace.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Moving TIF_32BIT to use bit 20 instead of 4 in the task flag field.
This change is making room for an upcoming new task macro
(_TIF_SYSCALL_EMU) which is preferred to set a bit in the lower 16-bits
part of the word.
This upcoming flag macro will take part in a composed macro
(_TIF_SYSCALL_DOTRACE) which will contain other flags as well, and it is
preferred that the whole _TIF_SYSCALL_DOTRACE macro only sets the lower 16
bits of a word, so, it could be handled using immediate operations (as load
immediate, add immediate, ...) where the immediate operand (SI) is limited
to 16-bits.
Another possible solution would be using the LOAD_REG_IMMEDIATE() macro
to load a full 64-bits word immediate, but it takes 5 operations instead of
one.
Having TIF_32BITS being redefined to use an upper bit is not a problem
since there is only one place in the assembly code where TIF_32BIT is being
used, and it could be replaced with an operation with right shift (addis),
since it is used alone, i.e. not being part of a composed macro, which has
different bits set, and would require LOAD_REG_IMMEDIATE().
Tested on a 64 bits Big Endian machine running a 32 bits task.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On PPC64, as register r13 points to the paca_struct at all time,
this patch adds a copy of the canary there, which is copied at
task_switch.
That new canary is then used by using the following GCC options:
-mstack-protector-guard=tls
-mstack-protector-guard-reg=r13
-mstack-protector-guard-offset=offsetof(struct paca_struct, canary))
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This functionality was tentatively added in the past
(commit 6533b7c16e ("powerpc: Initial stack protector
(-fstack-protector) support")) but had to be reverted
(commit f2574030b0 ("powerpc: Revert the initial stack
protector support") because of GCC implementing it differently
whether it had been built with libc support or not.
Now, GCC offers the possibility to manually set the
stack-protector mode (global or tls) regardless of libc support.
This time, the patch selects HAVE_STACKPROTECTOR only if
-mstack-protector-guard=tls is supported by GCC.
On PPC32, as register r2 points to current task_struct at
all time, the stack_canary located inside task_struct can be
used directly by using the following GCC options:
-mstack-protector-guard=tls
-mstack-protector-guard-reg=r2
-mstack-protector-guard-offset=offsetof(struct task_struct, stack_canary))
The protector is disabled for prom_init and bootx_init as
it is too early to handle it properly.
$ echo CORRUPT_STACK > /sys/kernel/debug/provoke-crash/DIRECT
[ 134.943666] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: lkdtm_CORRUPT_STACK+0x64/0x64
[ 134.943666]
[ 134.955414] CPU: 0 PID: 283 Comm: sh Not tainted 4.18.0-s3k-dev-12143-ga3272be41209 #835
[ 134.963380] Call Trace:
[ 134.965860] [c6615d60] [c001f76c] panic+0x118/0x260 (unreliable)
[ 134.971775] [c6615dc0] [c001f654] panic+0x0/0x260
[ 134.976435] [c6615dd0] [c032c368] lkdtm_CORRUPT_STACK_STRONG+0x0/0x64
[ 134.982769] [c6615e00] [ffffffff] 0xffffffff
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move the dereference of xc below the NULL test.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set, we look up dtl_idx in
the lppaca to determine the number of entries in the buffer. Since
lppaca is in big endian, we need to do an endian conversion before using
this in our calculation to determine the number of entries in the
buffer. Without this, we do not iterate over the existing entries in the
DTL buffer properly.
Fixes: 7c105b63bd ("powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set, we register the DTL
buffer for a cpu when the associated file under powerpc/dtl in debugfs
is opened. When doing so, we need to set the size of the buffer being
registered in the second u32 word of the buffer. This needs to be in big
endian, but we are not doing the conversion resulting in the below error
showing up in dmesg:
dtl_start: DTL registration for cpu 0 (hw 0) failed with -4
Fix this in the obvious manner.
Fixes: 7c105b63bd ("powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
PPC32 uses nonrecoverable_exception() while PPC64 uses
unrecoverable_exception().
Both functions are doing almost the same thing.
This patch removes nonrecoverable_exception()
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Instead of calling both of_irq_parse_one() and
irq_create_of_mapping(), call of_irq_get() instead which does
essentially the same thing. of_irq_get() also calls irq_find_host()
for deferred probe support, but this should be fine as
irq_create_of_mapping() also calls that internally. This gets us
closer to making the former 2 functions static.
In the process of simplifying request_event_sources_irqs(), combine
the the pr_err() and WARN_ON() calls to just a WARN().
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Instead of calling both of_irq_parse_one() and
irq_create_of_mapping(), call of_irq_parse_and_map() instead which
does the same thing. This gets us closer to making the former 2
functions static.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We need to make sure pmd_trans_huge returns false for a pmd migration entry.
We mark the migration entry by clearing the _PAGE_PRESENT bit. We keep the
_PAGE_PTE bit set to indicate a leaf page table entry. Hence we need to make
sure we check for pmd_present() so that pmd_trans_huge won't return true on
pmd migration entry.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Make sure we are operating on THP and hugetlb entries in the respective hash
fault handling routines.
No functional change in this patch. If we walked the table wrongly before, we
will retry the access.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Update few code paths to check for pmd_large.
set_pmd_at:
We want to use this to store swap pte at pmd level. For swap ptes we don't want
to set H_PAGE_THP_HUGE. Hence check for pmd_large in set_pmd_at. This remove
the false WARN_ON when using this with swap pmd entry.
pmd_page:
We don't really use them on pmd migration entries. But they can also work with
migration entries and we don't differentiate at the pte level. Hence update
pmd_page to work with pmd migration entries too
__find_linux_pte:
lockless page table walk need to handle pmd migration entries. pmd_trans_huge
check will return false on them. We don't set thp = 1 for such entries, but
update hpage_shift correctly. Without this we will walk pmd migration entries
as a pte page pointer which is wrong.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This make hugetlb directory pointer similar to other page able entries. A hugepd
entry is identified by lack of _PAGE_PTE bit set and directory size stored in
HUGEPD_SHIFT_MASK. We update that to also look at _PAGE_PRESENT
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
With this patch we use 0x8000000000000000UL (_PAGE_PRESENT) to indicate a valid
pgd/pud/pmd entry. We also switch the p**_present() to look at this bit.
With pmd_present, we have a special case. We need to make sure we consider a
pmd marked invalid during THP split as present. Right now we clear the
_PAGE_PRESENT bit during a pmdp_invalidate. Inorder to consider this special
case we add a new pte bit _PAGE_INVALID (mapped to _RPAGE_SW0). This bit is
only used with _PAGE_PRESENT cleared. Hence we are not really losing a pte bit
for this special case. pmd_present is also updated to look at _PAGE_INVALID.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ever since fast reboot is enabled by default in opal,
opal_cec_reboot() will use fast-reset instead of full IPL to perform
system reboot. This leaves the user with no direct way to force a full
IPL reboot except changing an nvram setting that persistently disables
fast-reset for all subsequent reboots.
This patch provides a more direct way for the user to force a one-shot
full IPL reboot by passing the command line argument 'full' to the
reboot command. So the user will be able to tweak the reboot behavior
via:
$ sudo reboot full # Force a full ipl reboot skipping fast-reset
or
$ sudo reboot # default reboot path (usually fast-reset)
The reboot command passes the un-parsed command argument to the kernel
via the 'Reboot' syscall which is then passed on to the arch function
pnv_restart(). The patch updates pnv_restart() to handle this cmd-arg
and issues opal_cec_reboot2 with OPAL_REBOOT_FULL_IPL to force a full
IPL reset.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In power7_marked_instr_event() there is a switch case that is missing
a break or an explicit fallthrough, it's not immediately clear which
it should be.
The function determines based on the PMU event code, whether the event
is a "marked" event (which then requires us to configure the PMU in a
certain way). On Power7 there is no specific bit(s) in the event to
tell us that, we just have to know.
Rather than having a full list of every event and whether they are
marked, we pull apart the event code and for events with certain
values of certain fields we can say that those are all marked events.
We take the psel (bits 0-7) of the event, and look at bits 4-7. For a
value of 6 we say that if the entire psel == 0x64 then if the pmc == 3
the event is marked, else not, and otherwise we continue.
It is then that we fallthrough to the 8 case, where we return true if
the unit == 0xd.
The question is should the 6 case also fallthrough and check for
unit == 0xd, or should it return.
Looking at the full list of events we see that there are zero events
where (psel >> 4) == 0x6 and unit == 0xd.
So the answer is it doesn't really matter, there are no valid event
codes that will return a different result whether we fallthrough or
break.
But equally, testing the 6 case events against unit == 0xd is slightly
bogus, as there are no such events. So to make the code clearer, and
avoid any future confusion, have the 6 case break rather than falling
through.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
This reverts commits:
5e46e29e6a ("powerpc/64s/hash: convert SLB miss handlers to C")
8fed04d0f6 ("powerpc/64s/hash: remove user SLB data from the paca")
655deecf67 ("powerpc/64s/hash: SLB allocation status bitmaps")
2e1626744e ("powerpc/64s/hash: provide arch_setup_exec hooks for hash slice setup")
89ca4e126a ("powerpc/64s/hash: Add a SLB preload cache")
This series had a few bugs, and the fixes are not all trivial. So
revert most of it for now.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add the ISO7816 ioctl and associated accessors and data structure.
Drivers can then use this common implementation to handle ISO7816
(smart cards).
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[ludovic.desroches@microchip.com: squash and rebase, removal of gpios, checkpatch fixes]
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable the 'dtbs' target for powerpc. This allows building all the dts
files in arch/powerpc/boot/dts/ when COMPILE_TEST and OF_ALL_DTBS are
enabled.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
There is nothing arch specific about building dtb files other than their
location under /arch/*/boot/dts/. Keeping each arch aligned is a pain.
The dependencies and supported targets are all slightly different.
Also, a cross-compiler for each arch is needed, but really the host
compiler preprocessor is perfectly fine for building dtbs. Move the
build rules to a common location and remove the arch specific ones. This
is done in a single step to avoid warnings about overriding rules.
The build dependencies had been a mixture of 'scripts' and/or 'prepare'.
These pull in several dependencies some of which need a target compiler
(specifically devicetable-offsets.h) and aren't needed to build dtbs.
All that is really needed is dtc, so adjust the dependencies to only be
dtc.
This change enables support 'dtbs_install' on some arches which were
missing the target.
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Paul Burton <paul.burton@mips.com>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-kbuild@vger.kernel.org
Cc: linux-snps-arc@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: uclinux-h8-devel@lists.sourceforge.jp
Cc: linux-mips@linux-mips.org
Cc: nios2-dev@lists.rocketboards.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-xtensa@linux-xtensa.org
Signed-off-by: Rob Herring <robh@kernel.org>
Align powerpc with other architectures which build the dtb files in the
same directory as the dts files. This is also in line with most other
build targets which are located in the same directory as the source.
This move will help enable the 'dtbs' target which builds all the dtbs
regardless of kernel config.
This transition could break some scripts if they expect dtb files in the
old location.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Commit 51c3c62b58 ("powerpc: Avoid code patching freed init
sections") accesses 'init_mem_is_free' flag too early, before the
kernel is relocated. This provokes early boot failure (before the
console is active).
As it is not necessary to do this verification that early, this
patch moves the test into patch_instruction() instead of
__patch_instruction().
This modification also has the advantage of avoiding unnecessary
remappings.
Fixes: 51c3c62b58 ("powerpc: Avoid code patching freed init sections")
Cc: stable@vger.kernel.org # 4.13+
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We return H_TOO_HARD from TCE update handlers when we think that
the next handler (realmode -> virtual mode -> user mode) has a chance to
handle the request; H_HARDWARE/H_CLOSED otherwise.
This changes the handlers to return H_TOO_HARD on every error giving
the userspace an opportunity to handle any request or at least log
them all.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The KVM TCE handlers are written in a way so they fail when either
something went horribly wrong or the userspace did some obvious mistake
such as passing a misaligned address.
We are going to enhance the TCE checker to fail on attempts to map bigger
IOMMU page than the underlying pinned memory so let's valitate TCE
beforehand.
This should cause no behavioral change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Introduce xarray value entries and tagged pointers to replace radix
tree exceptional entries. This is a slight change in encoding to allow
the use of an extra bit (we can now store BITS_PER_LONG - 1 bits in a
value entry). It is also a change in emphasis; exceptional entries are
intimidating and different. As the comment explains, you can choose
to store values or pointers in the xarray and they are both first-class
citizens.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
A reasonably big batch of fixes due to me being away for a few weeks.
A fix for the TM emulation support on Power9, which could result in corrupting
the guest r11 when running under KVM.
Two fixes to the TM code which could lead to userspace GPR corruption if we take
an SLB miss at exactly the wrong time.
Our dynamic patching code had a bug that meant we could patch freed __init text,
which could lead to corrupting userspace memory.
csum_ipv6_magic() didn't work on little endian platforms since we optimised it
recently.
A fix for an endian bug when reading a device tree property telling us how many
storage keys the machine has available.
Fix a crash seen on some configurations of PowerVM when migrating the partition
from one machine to another.
A fix for a regression in the setup of our CPU to NUMA node mapping in KVM
guests.
A fix to our selftest Makefiles to make them work since a recent change to the
shared Makefile logic.
Thanks to:
Alexey Kardashevskiy, Breno Leitao, Christophe Leroy, Michael Bringmann,
Michael Neuling, Nicholas Piggin, Paul Mackerras,, Srikar Dronamraju, Thiago
Jung Bauermann, Xin Long.
-----BEGIN PGP SIGNATURE-----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=G6wq
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.19-3' of https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Michael writes:
"powerpc fixes for 4.19 #3
A reasonably big batch of fixes due to me being away for a few weeks.
A fix for the TM emulation support on Power9, which could result in
corrupting the guest r11 when running under KVM.
Two fixes to the TM code which could lead to userspace GPR corruption
if we take an SLB miss at exactly the wrong time.
Our dynamic patching code had a bug that meant we could patch freed
__init text, which could lead to corrupting userspace memory.
csum_ipv6_magic() didn't work on little endian platforms since we
optimised it recently.
A fix for an endian bug when reading a device tree property telling
us how many storage keys the machine has available.
Fix a crash seen on some configurations of PowerVM when migrating the
partition from one machine to another.
A fix for a regression in the setup of our CPU to NUMA node mapping
in KVM guests.
A fix to our selftest Makefiles to make them work since a recent
change to the shared Makefile logic."
* tag 'powerpc-4.19-3' of https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix Makefiles for headers_install change
powerpc/numa: Use associativity if VPHN hcall is successful
powerpc/tm: Avoid possible userspace r1 corruption on reclaim
powerpc/tm: Fix userspace r13 corruption
powerpc/pseries: Fix unitialized timer reset on migration
powerpc/pkeys: Fix reading of ibm, processor-storage-keys property
powerpc: fix csum_ipv6_magic() on little endian platforms
powerpc/powernv/ioda2: Reduce upper limit for DMA window size (again)
powerpc: Avoid code patching freed init sections
KVM: PPC: Book3S HV: Fix guest r11 corruption with POWER9 TM workarounds
"device_type" use is deprecated for FDT though it has continued to be used
for nodes like cpu nodes. Use of_get_cpu_node() instead which works using
node names by default. This will allow the eventually removal of cpu
device_type properties.
Also, fix a leaked reference and add a missing of_node_put.
Cc: Vitaly Bordug <vitb@kernel.crashing.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
"device_type" use is deprecated for FDT though it has continued to be used
for nodes like cpu nodes. Use of_get_cpu_node() instead which works using
node names by default. This will allow the eventually removal of cpu
device_type properties.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Use the for_each_of_cpu_node iterator to iterate over cpu nodes. This
has the side effect of defaulting to iterating using "cpu" node names in
preference to the deprecated (for FDT) device_type == "cpu".
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Current we store the userspace r1 to PACATMSCRATCH before finally
saving it to the thread struct.
In theory an exception could be taken here (like a machine check or
SLB miss) that could write PACATMSCRATCH and hence corrupt the
userspace r1. The SLB fault currently doesn't touch PACATMSCRATCH, but
others do.
We've never actually seen this happen but it's theoretically
possible. Either way, the code is fragile as it is.
This patch saves r1 to the kernel stack (which can't fault) before we
turn MSR[RI] back on. PACATMSCRATCH is still used but only with
MSR[RI] off. We then copy r1 from the kernel stack to the thread
struct once we have MSR[RI] back on.
Suggested-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we treclaim we store the userspace checkpointed r13 to a scratch
SPR and then later save the scratch SPR to the user thread struct.
Unfortunately, this doesn't work as accessing the user thread struct
can take an SLB fault and the SLB fault handler will write the same
scratch SPRG that now contains the userspace r13.
To fix this, we store r13 to the kernel stack (which can't fault)
before we access the user thread struct.
Found by running P8 guest + powervm + disable_1tb_segments + TM. Seen
as a random userspace segfault with r13 looking like a kernel address.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
After migration of a powerpc LPAR, the kernel executes code to
update the system state to reflect new platform characteristics.
Such changes include modifications to device tree properties provided
to the system by PHYP. Property notifications received by the
post_mobility_fixup() code are passed along to the kernel in general
through a call to of_update_property() which in turn passes such
events back to all modules through entries like the '.notifier_call'
function within the NUMA module.
When the NUMA module updates its state, it resets its event timer. If
this occurs after a previous call to stop_topology_update() or on a
system without VPHN enabled, the code runs into an unitialized timer
structure and crashes. This patch adds a safety check along this path
toward the problem code.
An example crash log is as follows.
ibmvscsi 30000081: Re-enabling adapter!
------------[ cut here ]------------
kernel BUG at kernel/time/timer.c:958!
Oops: Exception in kernel mode, sig: 5 [#1]
LE SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: nfsv3 nfs_acl nfs tcp_diag udp_diag inet_diag lockd unix_diag af_packet_diag netlink_diag grace fscache sunrpc xts vmx_crypto pseries_rng sg binfmt_misc ip_tables xfs libcrc32c sd_mod ibmvscsi ibmveth scsi_transport_srp dm_mirror dm_region_hash dm_log dm_mod
CPU: 11 PID: 3067 Comm: drmgr Not tainted 4.17.0+ #179
...
NIP mod_timer+0x4c/0x400
LR reset_topology_timer+0x40/0x60
Call Trace:
0xc0000003f9407830 (unreliable)
reset_topology_timer+0x40/0x60
dt_update_callback+0x100/0x120
notifier_call_chain+0x90/0x100
__blocking_notifier_call_chain+0x60/0x90
of_property_notify+0x90/0xd0
of_update_property+0x104/0x150
update_dt_property+0xdc/0x1f0
pseries_devicetree_update+0x2d0/0x510
post_mobility_fixup+0x7c/0xf0
migration_store+0xa4/0xc0
kobj_attr_store+0x30/0x60
sysfs_kf_write+0x64/0xa0
kernfs_fop_write+0x16c/0x240
__vfs_write+0x40/0x200
vfs_write+0xc8/0x240
ksys_write+0x5c/0x100
system_call+0x58/0x6c
Fixes: 5d88aa85c0 ("powerpc/pseries: Update CPU maps when device tree is updated")
Cc: stable@vger.kernel.org # v3.10+
Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Call force_sig_pkuerr directly instead of rolling it by hand
in _exception_pkey.
Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Now that _exception no longer calls _exception_pkey it is no longer
necessary to handle any signal with any si_code. All pkey exceptions
are SIGSEGV with paired with SEGV_PKUERR. So just handle
that case and remove the now unnecessary parameters from _exception_pkey.
Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The callers of _exception don't need the pkey exception logic because
they are not processing a pkey exception. So just call exception_common
directly and then call force_sig_fault to generate the appropriate siginfo
and deliver the appropriate signal.
Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
It is brittle and wrong to populate si_pkey when there was not a pkey
exception. The field does not exist for all si_codes and in some
cases another field exists in the same memory location.
So factor out the code that all exceptions handlers must run
into exception_common, leaving the individual exception handlers
to generate the signals themselves.
Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Now that bad_key_fault_exception no longer calls __bad_area_nosemaphore
there is no reason for __bad_area_nosemaphore to handle pkeys.
Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
This removes the need for other code paths to deal with pkey exceptions.
Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
There are no callers of __bad_area that pass in a pkey parameter so it makes
no sense to take one.
Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
In do_sigbus isolate the mceerr signaling code and call
force_sig_mceerr instead of falling through to the force_sig_info that
works for all of the other signals.
Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
scan_pkey_feature() uses of_property_read_u32_array() to read the
ibm,processor-storage-keys property and calls be32_to_cpu() on the
value it gets. The problem is that of_property_read_u32_array() already
returns the value converted to the CPU byte order.
The value of pkeys_total ends up more or less sane because there's a min()
call in pkey_initialize() which reduces pkeys_total to 32. So in practice
the kernel ignores the fact that the hypervisor reserved one key for
itself (the device tree advertises 31 keys in my test VM).
This is wrong, but the effect in practice is that when a process tries to
allocate the 32nd key, it gets an -EINVAL error instead of -ENOSPC which
would indicate that there aren't any keys available
Fixes: cf43d3b264 ("powerpc: Enable pkey subsystem")
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On little endian platforms, csum_ipv6_magic() keeps len and proto in
CPU byte order. This generates a bad results leading to ICMPv6 packets
from other hosts being dropped by powerpc64le platforms.
In order to fix this, len and proto should be converted to network
byte order ie bigendian byte order. However checksumming 0x12345678
and 0x56341278 provide the exact same result so it is enough to
rotate the sum of len and proto by 1 byte.
PPC32 only support bigendian so the fix is needed for PPC64 only
Fixes: e9c4943a10 ("powerpc: Implement csum_ipv6_magic in assembly")
Reported-by: Jianlin Shi <jishi@redhat.com>
Reported-by: Xin Long <lucien.xin@gmail.com>
Cc: <stable@vger.kernel.org> # 4.18+
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
mpe: This was fixed originally in commit d3d4ffaae4
("powerpc/powernv/ioda2: Reduce upper limit for DMA window size"), but
contrary to what the merge commit says was inadvertently lost by me in
commit ce57c6610c ("Merge branch 'topic/ppc-kvm' into next") which
brought in changes that moved the code to a new file. So reapply it to
the new file.
Original commit message follows:
We use PHB in mode1 which uses bit 59 to select a correct DMA window.
However there is mode2 which uses bits 59:55 and allows up to 32 DMA
windows per a PE.
Even though documentation does not clearly specify that, it seems that
the actual hardware does not support bits 59:55 even in mode1, in
other words we can create a window as big as 1<<58 but DMA simply
won't work.
This reduces the upper limit from 59 to 55 bits to let the userspace
know about the hardware limits.
Fixes: ce57c6610c ("Merge branch 'topic/ppc-kvm' into next")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The next update of libfdt has a new dependency on INT_MAX. Update the
instances of libfdt_env.h in the kernel to either include the necessary
header with the definition or define it locally.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Replace user_single_step_siginfo with user_single_step_report
that allocates siginfo structure on the stack and sends it.
This allows tracehook_report_syscall_exit to become a simple
if statement that calls user_single_step_report or ptrace_report_syscall
depending on the value of step.
Update the default helper function now called user_single_step_report
to explicitly set si_code to SI_USER and to set si_uid and si_pid to 0.
The default helper has always been doing this (using memset) but it
was far from obvious.
The powerpc helper can now just call force_sig_fault.
The x86 helper can now just call send_sigtrap.
Unfortunately the default implementation of user_single_step_report
can not use force_sig_fault as it does not use a SIGTRAP si_code.
So it has to carefully setup the siginfo and use use force_sig_info.
The net result is code that is easier to understand and simpler
to maintain.
Ref: 85ec7fd9f8 ("ptrace: introduce user_single_step_siginfo() helper")
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Firmware-Assisted Dump (FADump) needs to be registered again after any
memory hot add/remove operation to update the crash memory ranges. But
currently, the kernel returns '-EEXIST' if we try to register without
uregistering it first. This could expose the system to racing issues
while unregistering and registering FADump from userspace during udev
events. Spare the userspace of this and let it be taken care of in the
kernel space for a simpler interface.
Since this change, running 'echo 1 > /sys/kernel/fadump_registered'
would result in re-regisering (unregistering and registering) FADump,
if it was already registered.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In lparcfg_write we hard code kbuf_sz and then use this as the variable
length of kbuf creating a variable length array. Since we're hard coding
the length anyway just define the array using this as the length and
remove the need for kbuf_sz, thus removing the variable length array.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In prom_check_platform_support() we retrieve and parse the
"ibm,arch-vec-5-platform-support" property of the chosen node.
Currently we use a variable length array however to avoid this use an
array of constant length 8.
This property is used to indicate the supported options of vector 5
bytes 23-26 of the ibm,architecture.vec node. Each of these options
is a pair of bytes, thus for 4 options we have a max length of 8 bytes.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This re-applies commit b91c1e3e7a ("powerpc: Fix duplicate const
clang warning in user access code") (Jun 2015) which was undone in
commits:
f2ca809059 ("powerpc/sparse: Constify the address pointer in __get_user_nosleep()") (Feb 2017)
d466f6c5ca ("powerpc/sparse: Constify the address pointer in __get_user_nocheck()") (Feb 2017)
f84ed59a61 ("powerpc/sparse: Constify the address pointer in __get_user_check()") (Feb 2017)
We see a large number of duplicate const errors in the user access
code when building with llvm/clang:
include/linux/pagemap.h:576:8: warning: duplicate 'const' declaration specifier [-Wduplicate-decl-specifier]
ret = __get_user(c, uaddr);
The problem is we are doing const __typeof__(*(ptr)), which will hit
the warning if ptr is marked const.
Removing const does not seem to have any effect on GCC code
generation.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When building with clang crt0's _zimage_start is not marked weak, which
breaks the build when linking the kernel image:
$ objdump -t arch/powerpc/boot/crt0.o |grep _zimage_start$
0000000000000058 g .text 0000000000000000 _zimage_start
ld: arch/powerpc/boot/wrapper.a(crt0.o): in function '_zimage_start':
(.text+0x58): multiple definition of '_zimage_start';
arch/powerpc/boot/pseries-head.o:(.text+0x0): first defined here
Clang requires the .weak directive to appear after the symbol is
declared. The binutils manual says:
This directive sets the weak attribute on the comma separated list of
symbol names. If the symbols do not already exist, they will be
created.
So it appears this is different with clang. The only reference I could
see for this was an OpenBSD mailing list post[1].
Changing it to be after the declaration fixes building with Clang, and
still works with GCC.
$ objdump -t arch/powerpc/boot/crt0.o |grep _zimage_start$
0000000000000058 w .text 0000000000000000 _zimage_start
Reported to clang as https://bugs.llvm.org/show_bug.cgi?id=38921
[1] https://groups.google.com/forum/#!topic/fa.openbsd.tech/PAgKKen2YCY
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Disable new features from recent releases, and clean out some other
unused options:
- Enable EXPERT, so we can disable some things
- Disable non-powerpc BPF decoders
- Disable TASKSTATS
- Disable unused syscalls
- Set more things to be modules
- Turn off unused network vendors
- PPC_OF_BOOT_TRAMPOLINE and FB_OF are unused on powernv
- Drop unused Radeon and Matrox GPU drivers
- IPV6 support landed in petitboot
- Bringup related command line powersave=off dropped, switch to quiet
Set CONFIG_I2C_CHARDEV=y as the module is not loaded automatically, and
without this i2cget etc. will fail in the skiroot environment.
This defconfig gets us build coverage of KERNEL_XZ, which was broken in
the 4.19 merge window for powerpc.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When performing partition migrations all present CPUs must be online
as all present CPUs must make the H_JOIN call as part of the migration
process. Once all present CPUs make the H_JOIN call, one CPU is returned
to make the rtas call to perform the migration to the destination system.
During testing of migration and changing the SMT state we have found
instances where CPUs are offlined, as part of the SMT state change,
before they make the H_JOIN call. This results in a hung system where
every CPU is either in H_JOIN or offline.
To prevent this this patch disables CPU hotplug during the migration
process.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There are three instances in which dlpar hotplug events are invoked;
handling a hotplug interrupt (in a kvm guest), handling a dlpar
request through sysfs, and updating LMB affinity when handling a
PRRN event. Only in the case of handling a hotplug interrupt do we
have to put the work on a workqueue, the other cases can handle the
dlpar request directly.
This patch exports the handle_dlpar_errorlog() function so that
dlpar hotplug events can be handled directly and updates the two
instances mentioned above to use the direct invocation.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The updates to powerpc numa and memory hotplug code now use the
in-kernel LMB array instead of the device tree. This change allows the
pseries memory DLPAR code to only update the device tree once after
successfully handling a DLPAR request.
Prior to the in-kernel LMB array, the numa code looked up the affinity
for memory being added in the device tree, the code now looks this up
in the LMB array. This change means the memory hotplug code can just
update the affinity for an LMB in the LMB array instead of updating
the device tree.
This also provides a savings in kernel memory. When updating the
device tree old properties are never free'ed since there is no
usecount on properties. This behavior leads to a new copy of the
property being allocated every time a LMB is added or removed (i.e. a
request to add 100 LMBs creates 100 new copies of the property). With
this update only a single new property is created when a DLPAR request
completes successfully.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
GCC 4.6 is the minimum supported now.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When switching processes, currently all user SLBEs are cleared, and a
few (exec_base, pc, and stack) are preloaded. In trivial testing with
small apps, this tends to miss the heap and low 256MB segments, and it
will also miss commonly accessed segments on large memory workloads.
Add a simple round-robin preload cache that just inserts the last SLB
miss into the head of the cache and preloads those at context switch
time. Every 256 context switches, the oldest entry is removed from the
cache to shrink the cache and require fewer slbmte if they are unused.
Much more could go into this, including into the SLB entry reclaim
side to track some LRU information etc, which would require a study of
large memory workloads. But this is a simple thing we can do now that
is an obvious win for common workloads.
With the full series, process switching speed on the context_switch
benchmark on POWER9/hash (with kernel speculation security masures
disabled) increases from 140K/s to 178K/s (27%).
POWER8 does not change much (within 1%), it's unclear why it does not
see a big gain like POWER9.
Booting to busybox init with 256MB segments has SLB misses go down
from 945 to 69, and with 1T segments 900 to 21. These could almost all
be eliminated by preloading a bit more carefully with ELF binary
loading.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This will be used by the SLB code in the next patch, but for now this
sets the slb_addr_limit to the correct size for 32-bit tasks.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add 32-entry bitmaps to track the allocation status of the first 32
SLB entries, and whether they are user or kernel entries. These are
used to allocate free SLB entries first, before resorting to the round
robin allocator.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
User SLB mappig data is copied into the PACA from the mm->context so
it can be accessed by the SLB miss handlers.
After the C conversion, SLB miss handlers now run with relocation on,
and user SLB misses are able to take recursive kernel SLB misses, so
the user SLB mapping data can be removed from the paca and accessed
directly.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch moves SLB miss handlers completely to C, using the standard
exception handler macros to set up the stack and branch to C.
This can be done because the segment containing the kernel stack is
always bolted, so accessing it with relocation on will not cause an
SLB exception.
Arbitrary kernel memory may not be accessed when handling kernel space
SLB misses, so care should be taken there. However user SLB misses can
access any kernel memory, which can be used to move some fields out of
the paca (in later patches).
User SLB misses could quite easily reconcile IRQs and set up a first
class kernel environment and exit via ret_from_except, however that
doesn't seem to be necessary at the moment, so we only do that if a
bad fault is encountered.
[ Credit to Aneesh for bug fixes, error checks, and improvements to bad
address handling, etc ]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Since RFC:
- Added MSR[RI] handling
- Fixed up a register loss bug exposed by irq tracing (Aneesh)
- Reject misses outside the defined kernel regions (Aneesh)
- Added several more sanity checks and error handling (Aneesh), we may
look at consolidating these tests and tightenig up the code but for
a first pass we decided it's better to check carefully.
Since v1:
- Fixed SLB cache corruption (Aneesh)
- Fixed untidy SLBE allocation "leak" in get_vsid error case
- Now survives some stress testing on real hardware
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
POWER9 introduces SLBIA IH=3, which invalidates all SLB entries and
associated lookaside information that have a class value of 1, which
Linux assigns to user addresses. This matches what switch_slb wants,
and allows a simple fast implementation that avoids the slb_cache
complexity.
As a side-effect, the POWER5 < DD2.1 SLB invalidation workaround is
also avoided on POWER9.
Process context switching rate is improved about 2.2% for a small
process that hits the slb cache which is the best case for the current
code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The SLBIA IH=1 hint will remove all non-zero SLBEs, but only
invalidate ERAT entries associated with a class value of 1, for
processors that support the hint (e.g., POWER6 and newer), which
Linux assigns to user addresses.
This prevents kernel ERAT entries from being invalidated when
context switchig (if the thread faulted in more than 8 user SLBEs).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Remove the vmalloc segment from bolted SLBEs. This is not required to
be bolted, and seems like it was added to help pre-load the SLB on
context switch. However there are now other segments like the vmemmap
segment and non-zero node memory that often take misses after a context
switch, so it is better to solve this in a more general way.
A subsequent change will track free SLB entries and uses those rather
than round-robin overwrite valid entries, which makes it far less
likely for kernel SLBEs to be evicted after they are installed.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The POWER5 < DD2.1 issue is that slbie needs to be issued more than
once. It came in with this change:
ChangeSet@1.1608, 2004-04-29 07:12:31-07:00, david@gibson.dropbear.id.au
[PATCH] POWER5 erratum workaround
Early POWER5 revisions (<DD2.1) have a problem requiring slbie
instructions to be repeated under some circumstances. The patch below
adds a workaround (patch made by Anton Blanchard).
(aka. 3e4520f7605243abf66a7ccd3d2e49e48e8c0483 in the full history tree)
The extra slbie in switch_slb is done even for the case where slbia is
called (slb_flush_and_rebolt). I don't believe that is required
because there are other slb_flush_and_rebolt callers which do not
issue the workaround slbie, which would be broken if it was required.
It also seems to be fine inside the isync with the first slbie, as it
is in the kernel stack switch code.
So move this workaround to where it is required. This is not much of
an optimisation because this is the fast path, but it makes the code
more understandable and neater.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Retain slbie_data initialisation to avoid compiler warning]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
