In this case, we don't need to check that new_ifindex is positive in
validate_linkmsg.
Fixes: eeb85a14ee ("net: Allow to specify ifindex when device is moved to another namespace")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce TC sample offload
Background
----------
The tc sample action allows user to sample traffic matched by tc
classifier. The sampling consists of choosing packets randomly and
sampling them using psample module.
The tc sample parameters include group id, sampling rate and packet's
truncation (to save kernel-user traffic).
Sample in TC SW
---------------
User must specify rate and group id for sample action, truncate is
optional.
tc filter add dev enp4s0f0_0 ingress protocol ip prio 1 flower \
src_mac 02:25:d0:14:01:02 dst_mac 02:25:d0:14:01:03 \
action sample rate 10 group 5 trunc 60 \
action mirred egress redirect dev enp4s0f0_1
The tc sample action kernel module 'act_sample' will call another
kernel module 'psample' to send sampled packets to userspace.
MLX5 sample HW offload - MLX5 driver patches
--------------------------------------------
The sample action is translated to a goto flow table object
destination which samples packets according to the provided
sample ratio. Sampled packets are duplicated. One copy is
processed by a termination table, named the sample table,
which sends the packet to the eswitch manager port (that will
be processed by software).
The second copy is processed by the default table which executes
the subsequent actions. The default table is created per <vport,
chain, prio> tuple as rules with different prios and chains may
overlap.
For example, for the following typical flow table:
+-------------------------------+
+ original flow table +
+-------------------------------+
+ original match +
+-------------------------------+
+ sample action + other actions +
+-------------------------------+
We translate the tc filter with sample action to the following HW model:
+---------------------+
+ original flow table +
+---------------------+
+ original match +
+---------------------+
|
v
+------------------------------------------------+
+ Flow Sampler Object +
+------------------------------------------------+
+ sample ratio +
+------------------------------------------------+
+ sample table id | default table id +
+------------------------------------------------+
| |
v v
+-----------------------------+ +----------------------------------------+
+ sample table + + default table per <vport, chain, prio> +
+-----------------------------+ +----------------------------------------+
+ forward to management vport + + original match +
+-----------------------------+ +----------------------------------------+
+ other actions +
+----------------------------------------+
Flow sampler object
-------------------
Hardware introduces flow sampler object to do sample. It is a new
destination type. Driver needs to specify two flow table ids in it.
One is sample table id. The other one is the default table id.
Sample table samples the packets according to the sample rate and
forward the sampled packets to eswitch manager port. Default table
finishes the subsequent actions.
Group id and reg_c0
-------------------
Userspace program will take different actions for sampled packets
according to tc sample action group id. So hardware must pass group
id to software for each sampled packets. In Paul Blakey's "Introduce
connection tracking offload" patch set, reg_c0 lower 16 bits are used
for miss packet chain id restore. We convert reg_c0 lower 16 bits to
a common object pool, so other features can also use it.
Since sample group id is 32 bits, create a 16 bits object id to map
the group id and write the object id to reg_c0 lower 16 bits. reg_c0
can only be used for matching. Write reg_c0 to flow_tag, so software
can get the object id via flow_tag and find group id via the common
object pool.
Sampler restore handle
----------------------
Use common object pool to create an object id to map sample parameters.
Allocate a modify header action to write the object id to reg_c0 lower
16 bits. Create a restore rule to pass the object id to software. So
software can identify sampled packets via the object id and send it to
userspace.
Aggregate the modify header action, restore rule and object id to a
sample restore handle. Re-use identical sample restore handle for
the same object id.
Send sampled packets to userspace
---------------------------------
The destination for sampled packets is eswitch manager port, so
representors can receive sampled packets together with the group id.
Driver will send sampled packets and group id to userspace via psample.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmBtNrUACgkQSD+KveBX
+j6cRQf/ZARhVPDEgCvFd+wD+n2VCM11FJCpIumGecfqpA9DB/7i0iQrBWG2cGy6
Go3XZ7HCPy0bAeDnVMBulF5RshfQkB/CNJfCTrw0QkNvenO/eYPZrl0XAGwL7w8W
9vkeK51VG70bj7VEMeWVovL0X2VoGea0MD0ASLgOG3qZmCjFX0Aw3yY4WNZAA1fn
i9rSP0AgTXqbR+nUezqP9xDHCyEf4etqpdPO/gosFvasZxTa9Xm6tXxT8YrcjAEH
MjIYJVS5SERem/gxqrRi5p0u1RNrbZ3vPMmZQIr6x2eBXLwMhvjvcxKqZ2l9PvD5
+O+Hf43GAmhAoqZukvU8H8oMWArciA==
=MkzD
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2021-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2021-04-06
Introduce TC sample offload
Background
----------
The tc sample action allows user to sample traffic matched by tc
classifier. The sampling consists of choosing packets randomly and
sampling them using psample module.
The tc sample parameters include group id, sampling rate and packet's
truncation (to save kernel-user traffic).
Sample in TC SW
---------------
User must specify rate and group id for sample action, truncate is
optional.
tc filter add dev enp4s0f0_0 ingress protocol ip prio 1 flower \
src_mac 02:25:d0:14:01:02 dst_mac 02:25:d0:14:01:03 \
action sample rate 10 group 5 trunc 60 \
action mirred egress redirect dev enp4s0f0_1
The tc sample action kernel module 'act_sample' will call another
kernel module 'psample' to send sampled packets to userspace.
MLX5 sample HW offload - MLX5 driver patches
--------------------------------------------
The sample action is translated to a goto flow table object
destination which samples packets according to the provided
sample ratio. Sampled packets are duplicated. One copy is
processed by a termination table, named the sample table,
which sends the packet to the eswitch manager port (that will
be processed by software).
The second copy is processed by the default table which executes
the subsequent actions. The default table is created per <vport,
chain, prio> tuple as rules with different prios and chains may
overlap.
For example, for the following typical flow table:
+-------------------------------+
+ original flow table +
+-------------------------------+
+ original match +
+-------------------------------+
+ sample action + other actions +
+-------------------------------+
We translate the tc filter with sample action to the following HW model:
+---------------------+
+ original flow table +
+---------------------+
+ original match +
+---------------------+
|
v
+------------------------------------------------+
+ Flow Sampler Object +
+------------------------------------------------+
+ sample ratio +
+------------------------------------------------+
+ sample table id | default table id +
+------------------------------------------------+
| |
v v
+-----------------------------+ +----------------------------------------+
+ sample table + + default table per <vport, chain, prio> +
+-----------------------------+ +----------------------------------------+
+ forward to management vport + + original match +
+-----------------------------+ +----------------------------------------+
+ other actions +
+----------------------------------------+
Flow sampler object
-------------------
Hardware introduces flow sampler object to do sample. It is a new
destination type. Driver needs to specify two flow table ids in it.
One is sample table id. The other one is the default table id.
Sample table samples the packets according to the sample rate and
forward the sampled packets to eswitch manager port. Default table
finishes the subsequent actions.
Group id and reg_c0
-------------------
Userspace program will take different actions for sampled packets
according to tc sample action group id. So hardware must pass group
id to software for each sampled packets. In Paul Blakey's "Introduce
connection tracking offload" patch set, reg_c0 lower 16 bits are used
for miss packet chain id restore. We convert reg_c0 lower 16 bits to
a common object pool, so other features can also use it.
Since sample group id is 32 bits, create a 16 bits object id to map
the group id and write the object id to reg_c0 lower 16 bits. reg_c0
can only be used for matching. Write reg_c0 to flow_tag, so software
can get the object id via flow_tag and find group id via the common
object pool.
Sampler restore handle
----------------------
Use common object pool to create an object id to map sample parameters.
Allocate a modify header action to write the object id to reg_c0 lower
16 bits. Create a restore rule to pass the object id to software. So
software can identify sampled packets via the object id and send it to
userspace.
Aggregate the modify header action, restore rule and object id to a
sample restore handle. Re-use identical sample restore handle for
the same object id.
Send sampled packets to userspace
---------------------------------
The destination for sampled packets is eswitch manager port, so
representors can receive sampled packets together with the group id.
Driver will send sampled packets and group id to userspace via psample.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In function fdp_nci_patch_otp and fdp_nci_patch_ram，many goto
out statements are used, and out label just return variable r.
in some places,just jump to the out label, and in other places,
assign a value to the variable r,then jump to the out label.
It is unnecessary, we just use return sentences to replace goto
sentences and delete out label.
Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Disable software thermal protection by removing critical trip points
from all thermal zones.
The software thermal protection is redundant given there are two layers
of protection below it in firmware and hardware. The first layer is
performed by firmware, the second, in case firmware was not able to
perform protection, by hardware.
The temperature threshold set for hardware protection is always higher
than for firmware.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
EHL PSE SGMII mode requires to ungate the SERDES PHY rx clk for power up
sequence and vice versa.
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add missing kdoc for phy tunable callbacks.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mat Martineau says:
====================
mptcp: Cleanup, a new test case, and header trimming
Some more patches to include from the MPTCP tree:
Patches 1-6 refactor an address-related data structure and reduce some
duplicate code that handles IPv4 and IPv6 addresses.
Patch 7 adds a test case for the MPTCP netlink interface, passing a
specific ifindex to the kernel.
Patch 8 drops extra header options from IPv4 address echo packets,
improving consistency and testability between IPv4 and IPv6.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Current Linux carries echo-ed ADD_ADDR over pure TCP ACKs, so there is no
need to add a DSS element that would fit only ADD_ADDR with IPv4 address.
Drop the DSS from echo-ed ADD_ADDR, regardless of the IP version.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new testcase for setting the net device name. In it,
pass the net device name to pm_nl_ctl to set the ifindex field of struct
mptcp_pm_addr_entry.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The length of the IPv4 address is 4 octets and IPv6 is 16. That's the only
difference between add_addr_generate_hmac and add_addr6_generate_hmac.
This patch dropped the duplicate code and unify them into one.
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the type of the address family in struct mptcp_options_received
became sa_family_t, we should set AF_INET/AF_INET6 to it, instead of
using MPTCP_ADDR_IPVERSION_4/6.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added a new struct mptcp_addr_info member addr in struct
mptcp_options_received, and dropped the original family, addr_id, addr,
addr6 and port fields in it. Then we can pass the parameter mp_opt.addr
directly to mptcp_pm_add_addr_received and mptcp_pm_add_addr_echoed.
Since the port number became big-endian now, use htons to convert the
incoming port number to it. Also use ntohs to convert it when passing
it to add_addr_generate_hmac or printing it out.
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the family field was added in struct mptcp_out_options, no need to
use OPTION_MPTCP_ADD_ADDR6 to identify the IPv6 address. Drop it.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moved the mptcp_addr_info struct from protocol.h to mptcp.h,
added a new struct mptcp_addr_info member addr in struct mptcp_out_options,
and dropped the original addr, addr6, addr_id and port fields in it. Then
we can use opts->addr to get the adding address from PM directly using
mptcp_pm_add_addr_signal.
Since the port number became big-endian now, use ntohs to convert it
before sending it out with the ADD_ADDR suboption. Also convert it
when passing it to add_addr_generate_hmac or printing it out.
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moved the flags and ifindex fields from struct mptcp_addr_info
to struct mptcp_pm_addr_entry. Add the flags and ifindex values as two new
parameters to __mptcp_subflow_connect.
In mptcp_pm_create_subflow_or_signal_addr, pass the local address entry's
flags and ifindex fields to __mptcp_subflow_connect.
In mptcp_pm_nl_add_addr_received, just pass two zeros to it.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following diagram illustrates the hardware model for tc sample action:
+---------------------+
+ original flow table +
+---------------------+
+ original match +
+---------------------+
|
v
+------------------------------------------------+
+ Flow Sampler Object +
+------------------------------------------------+
+ sample ratio +
+------------------------------------------------+
+ sample table id | default table id +
+------------------------------------------------+
| |
v v
+-----------------------------+ +----------------------------------------+
+ sample table + + default table per <vport, chain, prio> +
+-----------------------------+ +----------------------------------------+
+ forward to management vport + + original match +
+-----------------------------+ +----------------------------------------+
+ other actions +
+----------------------------------------+
The sample action is translated to a goto flow table object
destination which samples packets according to the provided
sample ratio. Sampled packets are duplicated. One copy is
processed by a termination table, named the sample table,
which sends the packet to the eswitch manager port (that will
be processed by software).
The second copy is processed by the default table which executes
the subsequent actions. The default table is created per <vport,
chain, prio> tuple as rules with different prios and chains may
overlap.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Mark the sampled packets with a sample restore object. Send sampled
packets using the psample api.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Use common object pool to create an object ID to map sample parameters.
Allocate a modify header action to write the object ID to reg_c0 lower
16 bits. Create a restore rule to pass the object ID to software. So
software can identify sampled packets via the object ID and send it to
userspace.
Aggregate the modify header action, restore rule and object ID to a
sample restore handle. Re-use identical sample restore handle for
the same object ID.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In order to offload sample action, HW introduces sampler object. The
sampler object samples packets according to the provided sample ratio.
Sampled packets are duplicated. One copy is processed by a termination
table, named the sample table, which sends the packet up to software.
The second copy is processed by the default table.
Instantiate sampler object. Re-use identical sampler object for
the same sample ratio, sample table and default table as a prestep for
offloading tc sample actions.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Sampled packets are sent to software using termination tables. There
is only one rule in that table that is to forward sampled packets to
the e-switch management vport.
Create a sampler termination table and rule for each eswitch.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Parse TC sample action and save sample parameters in flow attribute
data structure.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently, the u32 chain id is mapped to u16 value which is stored on
the lower 16 bits of reg_c0 for FDB and reg_b for NIC tables. The
mapping is internally maintained by the chains object. However, with
the introduction of reg_c0 objects the fdb may store more than just
the chain id on reg_c0. This is not relevant for NIC tables.
Separate the chains mapping instantiation for FDB and NIC tables.
Remove the mapping from the chains object. For FDB tables, create
the mapping per eswitch. For NIC tables, create the mapping per tc
table. Pass the corresponding mapping pointer when creating the
chains object.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently reg_c0 lower 16 bits and reg_b are used to store the chain
id that missed in FDB and NIC tables accordingly. However, the
registers' values may index a restore object, rather than a single u32
value. Different object types can be used to restore mutually exclusive
contexts such as chain id and sample group id.
Use the mapping object to associate an index with a restore object
as a prestep for supporting additional restore types.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Different per voprt table is created using a different per vport table
namespace. Because we can't use variable to set the namespace member
value. If max group number is 0 in the namespace, use the eswitch
default max group number.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently, per vport table was used only for port mirroring actions.
However, sample action will also require a per vport table instance.
Generalize the vport table API to work with multiple namespaces where
each namespace manages its own vport table instance.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Public api starts with mlx5 and remove mlx5 for non-public api.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently, the vport table functions are in common eswitch offload
file. This file is too big. Move the vport table create, delete and
lookup functions to a separate file. Put the file in esw directory.
Pre-step for generalizing its functionality for serving both the
mirroring and the sample features.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Quotes to backticks. All commands use backticks since the names
are constants.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow hardware offload of a policer action attached to a matchall filter
which enforces a packets-per-second rate-limit.
e.g.
tc filter add dev tap1 parent ffff: u32 match \
u32 0 0 police pkts_rate 3000 pkts_burst 1000
Signed-off-by: Peng Zhang <peng.zhang@corigine.com>
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter/IPVS updates for your net-next tree:
1) Simplify log infrastructure modularity: Merge ipv4, ipv6, bridge,
netdev and ARP families to nf_log_syslog.c. Add module softdeps.
This fixes a rare deadlock condition that might occur when log
module autoload is required. From Florian Westphal.
2) Moves part of netfilter related pernet data from struct net to
net_generic() infrastructure. All of these users can be modules,
so if they are not loaded there is no need to waste space. Size
reduction is 7 cachelines on x86_64, also from Florian.
2) Update nftables audit support to report events once per table,
to get it aligned with iptables. From Richard Guy Briggs.
3) Check for stale routes from the flowtable garbage collector path.
This is fixing IPv6 which breaks due missing check for the dst_cookie.
4) Add a nfnl_fill_hdr() function to simplify netlink + nfnetlink
headers setup.
5) Remove documentation on several statified functions.
6) Remove printk on netns creation for the FTP IPVS tracker,
from Florian Westphal.
7) Remove unnecessary nf_tables_destroy_list_lock spinlock
initialization, from Yang Yingliang.
7) Remove a duplicated forward declaration in ipset,
from Wan Jiabing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We have currently three users of the PSEC_PER_SEC each of them defining it
individually. Instead, move it to time64.h to be available for everyone.
There is a new user coming with the same constant in use. It will also
make its life easier.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PCI device IDs are defined with a prefix PCI_DEVICE_ID.
There is no need to repeat the ID part at the end of each definition.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eliminate the following coccicheck warning:
drivers/net/netdevsim/fib.c:569:2-3: Unneeded semicolon
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eliminate the following coccicheck warning:
drivers/net/ethernet/mediatek/mtk_ppe.c:270:2-3: Unneeded semicolon
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In function s3fwrn5_nci_post_setup, the variable ret is assigned then
goto out label, which just return ret, so we use return to replace it.
Other goto sentences are similar, we use return sentences to replace
goto sentences and delete out label.
Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Grant Grundler says:
====================
usbnet: speed reporting for devices without MDIO
This series introduces support for USB network devices that report
speed as a part of their protocol, not emulating an MII to be accessed
over MDIO.
v2: rebased on recent upstream changes
v3: incorporated hints on naming and comments
v4: fix misplaced hunks; reword some commit messages;
add same change for cdc_ether
v4-repost: added "net-next" to subject and Andrew Lunn's Reviewed-by
I'm reposting Oliver Neukum's <oneukum@suse.com> patch series with
fix ups for "misplaced hunks" (landed in the wrong patches).
Please fixup the "author" if "git am" fails to attribute the
patches 1-3 (of 4) to Oliver.
I've tested v4 series with "5.12-rc3+" kernel on Intel NUC6i5SYB
and + Sabrent NT-S25G. Google Pixelbook Go (chromeos-4.4 kernel)
+ Alpha Network AUE2500C were connected directly to the NT-S25G
to get 2.5Gbps link rate:
Settings for enx002427880815:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 2500Mb/s
Duplex: Half
Auto-negotiation: off
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
MDI-X: Unknown
Current message level: 0x00000007 (7)
drv probe link
Link detected: yes
"Duplex" is a lie since we get no information about it.
I expect "Auto-Negotiation" is always true for cdc_ncm and
cdc_ether devices and perhaps someone knows offhand how
to have ethtool report "true" instead.
But this is good step in the right direction.
base-commit: 1c273e10bc
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Until very recently, the usbnet framework only had support functions
for devices which reported the link speed by explicitly querying the
PHY over a MDIO interface. However, the cdc_ether devices send
notifications when the link state or link speeds change and do not
expose the PHY (or modem) directly.
Support funtions (e.g. usbnet_get_link_ksettings_internal()) to directly
query state recorded by the cdc_ether driver were added in a previous patch.
Instead of cdc_ether spewing the link speed into the dmesg buffer,
record the link speed encoded in these notifications and tell the
usbnet framework to use the new functions to get link speed/state.
User space can now get the most recent link speed/state using ethtool.
v4: added to series since cdc_ether uses same notifications
as cdc_ncm driver.
Signed-off-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Until very recently, the usbnet framework only had support functions
for devices which reported the link speed by explicitly querying the
PHY over a MDIO interface. However, the cdc_ncm devices send
notifications when the link state or link speeds change and do not
expose the PHY (or modem) directly.
Support funtions (e.g. usbnet_get_link_ksettings_internal()) to directly
query state recorded by the cdc_ncm driver were added in a previous patch.
So instead of cdc_ncm spewing the link speed into the dmesg buffer,
record the link speed encoded in these notifications and tell the
usbnet framework to use the new functions to get link speed/state.
Link speed/state is now available via ethtool.
This is especially useful given all current RTL8156 devices emit
a connection/speed status notification every 32ms and this would
fill the dmesg buffer. This implementation replaces the one
recently submitted in de658a195e :
"net: usb: cdc_ncm: don't spew notifications"
v2: rebased on upstream
v3: changed variable names
v4: rewrote commit message
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Tested-by: Roland Dreier <roland@kernel.org>
Signed-off-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The old method for reporting link speed assumed a driver uses the
generic phy (mii) MDIO read/write functions. CDC devices don't
expose the phy.
Add a primitive internal version reporting back directly what
the CDC notification/status operations recorded.
v2: rebased on upstream
v3: changed names and made clear which units are used
v4: moved hunks to correct patch; rewrote commmit messages
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Tested-by: Roland Dreier <roland@kernel.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Tested-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The generic functions assumed devices provided an MDIO interface (accessed
via older mii code, not phylib). This is true only for genuine ethernet.
Devices with a higher level of abstraction or based on different
technologies do not have MDIO. To support this case, first rename
the existing functions with _mii suffix.
v2: rebased on changed upstream
v3: changed names to clearly say that this does NOT use phylib
v4: moved hunks to correct patch; reworded commmit messages
Signed-off-by : Oliver Neukum <oneukum@suse.com>
Tested-by: Roland Dreier <roland@kernel.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Tested-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Userspace sends tcp connection (sock) destroy on network switch
i.e switching the default network of the device between multiple
networks(Cellular/Wifi/Ethernet).
Kernel though doesn't send reset for the connections in SYN-SENT state
and these connections continue to remain.
Even as per RFC 793, there is no hard rule to not send RST on ABORT in
this state.
Modify tcp_abort and tcp_disconnect behavior to send RST for connections
in syn-sent state to avoid lingering connections on network switch.
Signed-off-by: Manoj Basapathi <manojbm@codeaurora.org>
Signed-off-by: Sauvik Saha <ssaha@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
all have been moved to generic_net infra. On x86_64, this reduces
struct net size from 70 to 63 cache lines (4480 to 4032 byte).
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
dwork struct is large (>128 byte) and not needed when conntrack module
is not loaded.
Place it in net_generic data instead. The struct net dwork member is now
obsolete and will be removed in a followup patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
No need to keep this in struct net, place it in the net_generic data.
The sysctl pointer is removed from struct net in a followup patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This moves all nf_tables pernet data from struct net to a net_generic
extension, with the exception of the gencursor.
The latter is used in the data path and also outside of the nf_tables
core. All others are only used from the configuration plane.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
ebtables currently uses net->xt.tables[BRIDGE], but upcoming
patch will move net->xt.tables away from struct net.
To avoid exposing x_tables internals to ebtables, use a private list
instead.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This allows followup patch to remove the defrag_ipv4 member from struct
net. It also allows to auto-remove the hooks later on by adding a
_disable() function. This will be done later in a follow patch series.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This allows followup patch to remove these members from struct net.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
