Not a lot that's ready to be included this round for Nouveau. GP108
modesetting support, and misc other fixes.
* 'linux-4.14' of git://github.com/skeggsb/linux:
drm/nouveau/kms/nv50: perform null check on msto[i] rathern than msto
drm/nouveau/pci/msi: disable MSI on big-endian platforms by default
drm/nouveau: silence suspend/resume debugging messages
drm/nouveau/kms/nv04-nv4x: fix exposed format list
drm/nouveau/kms/nv10-nv40: add NV21 support to overlay
drm/nouveau/kms/nv04-nv40: improve overlay error detection, fix pitch setting
drm/nouveau/kms/nv04-nv40: prevent undisplayable framebuffers from creation
drm/nouveau/mpeg: print more debug info when rejecting dma objects
drm/nouveau/fb/gf100-: zero mmu debug buffers
drm/nouveau/bar/gf100: add config option to limit BAR2 to 16MiB
initial support (display-only) for GP108
drm/nouveau/falcon: use a more reasonable msgqueue timeout value
drm/nouveau/disp: Silence DCB warnings.
drm/nouveau/bios: Demote missing fp table message to NV_DEBUG.
drm/nouveau/pmu/gt215-: abstract detection of whether reset is needed
drm/nouveau/pmu/gt215: fix reset
drm/nouveau/mc/gf100: add pmu to reset mask
drm/nouveau/disp/gf119-: avoid creating non-existent heads
drm/nouveau/therm/gm200: Added
drm/nouveau/therm: fix spelling mistake on array thresolds
The null check on the array msto is incorrect since msto is never
null. The null check should be instead on msto[i] since this is
being dereferenced in the call to drm_mode_connector_attach_encoder.
Thanks to Emil Velikov for pointing out the mistake in my original
fix and for suggesting the correct fix.
Detected by CoverityScan, CID#1375915 ("Array compared against 0")
Fixes: f479c0ba4a ("drm/nouveau/kms/nv50: initial support for DP 1.2 multi-stream")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
It appears that MSI does not work on either G5 PPC nor on a E5500-based
platform, where other hardware is reported to work fine with MSI.
Both tests were conducted with NV4x hardware, so perhaps other (or even
this) hardware can be made to work. It's still possible to force-enable
with config=NvMSI=1 on load.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
drm_crtc_init exposes the XRGB8888 and ARGB8888 formats. In actuality,
ARGB8888's 32-bit depth messes up some formulas that weren't meant for
it, and the alpha is fairly meaningless for the primary plane.
The modesetting logic appears to be fully prepared for RGB565 as well as
XRGB1555 however, as tested with modetest.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We were previously setting the pitch based on a perfectly packed buffer.
This does not necessarily happen. Either modetest started generating
such buffers recently, or earlier testing only happened with well-picked
overlay sizes.
While we're at it, beef up and refactor the error state detection.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Pre-nv50 YUV overlays have stringent requirements for working with the
internal machinery. Instead of rejecting these at update_plane time, we
should instead prevent the framebuffers from being created in the first
place.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Useful for testing, and for the userspace build where we can't kick
a framebuffer driver off the device.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Forked from GP107 implementation. Secboot/gr left out as we don't have
signed blobs from NVIDIA in linux-firmware.
(Ben): Was unable to mmiotrace the binary driver for unknown reasons,
so not able to 100% confirm that no other changes from GP107
are needed. Quick testing shows it seems to work well enough
for display. Due to NVIDIA dragging their heels on getting
signed firmware to us, this is the best we can do for now.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101601
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Most of these errors seem to be WFD related. Official documentation
says dcb type 8 is reserved. It's probably used for WFD. Silence
the warning in either case.
Connector type 70 is stated to be a virtual connector for WiFi
display. Since we know this, don't warn that we don't.
Signed-off by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This warning seems to pop up mainly in laptop cards. Silence it as
it is expected behavior.
Signed-off by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The NV_PMC_ENABLE bit for PMU did not appear until GF100, and some other
unknown register needs to be poked instead.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
An upcoming commit will replace direct NV_PMC register bashing from PMU
with a call to the proper function.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We assume that each board has 4 heads for GF119+. However this is not
necessarily true - in the case of a GP108 board, the register indicated
that there were only 2.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101601
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Array thresolds should be named thresholds, rename it. Also make it static
static const char * const
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
- Lock the IDMAC scanout channel for multiple back-to-back bursts if possible,
to improve memory bandwidth utilisation.
- Replace a few occurences of state->fb with the already existing local fb
variable in ipu_plane_atomic_update
-----BEGIN PGP SIGNATURE-----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=nXzK
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-next-2017-07-18' of git://git.pengutronix.de/git/pza/linux into drm-next
imx-drm: lock scanout transfers for consecutive bursts
- Lock the IDMAC scanout channel for multiple back-to-back bursts if possible,
to improve memory bandwidth utilisation.
- Replace a few occurences of state->fb with the already existing local fb
variable in ipu_plane_atomic_update
* tag 'imx-drm-next-2017-07-18' of git://git.pengutronix.de/git/pza/linux:
drm/imx: lock scanout transfers for consecutive bursts
drm/imx: ipuv3-plane: use fb local variable instead of state->fb
Final pile of features for 4.14
- New ioctl to change NOA configurations, plus prep (Lionel)
- CCS (color compression) scanout support, based on the fancy new
modifier additions (Ville&Ben)
- Document i915 register macro style (Jani)
- Many more gen10/cnl patches (Rodrigo, Pualo, ...)
- More gpu reset vs. modeset duct-tape to restore the old way.
- prep work for cnl: hpd_pin reorg (Rodrigo), support for more power
wells (Imre), i2c pin reorg (Anusha)
- drm_syncobj support (Jason Ekstrand)
- forcewake vs gpu reset fix (Chris)
- execbuf speedup for the no-relocs fastpath, anv/vk low-overhead ftw (Chris)
- switch to idr/radixtree instead of the resizing ht for execbuf id->vma
lookups (Chris)
gvt:
- MMIO save/restore optimization (Changbin)
- Split workload scan vs. dispatch for more parallel exec (Ping)
- vGPU full 48bit ppgtt support (Joonas, Tina)
- vGPU hw id expose for perf (Zhenyu)
Bunch of work all over to make the igt CI runs more complete/stable.
Watch https://intel-gfx-ci.01.org/tree/drm-tip/shards-all.html for
progress in getting this ready. Next week we're going into production
mode (i.e. will send results to intel-gfx) on hsw, more platforms to
come.
Also, a new maintainer tram, I'm stepping out. Huge thanks to Jani for
being an awesome co-maintainer the past few years, and all the best
for Jani, Joonas&Rodrigo as the new maintainers!
* tag 'drm-intel-next-2017-08-18' of git://anongit.freedesktop.org/git/drm-intel: (179 commits)
drm/i915: Update DRIVER_DATE to 20170818
drm/i915/bxt: use NULL for GPIO connection ID
drm/i915: Mark the GT as busy before idling the previous request
drm/i915: Trivial grammar fix s/opt of/opt out of/ in comment
drm/i915: Replace execbuf vma ht with an idr
drm/i915: Simplify eb_lookup_vmas()
drm/i915: Convert execbuf to use struct-of-array packing for critical fields
drm/i915: Check context status before looking up our obj/vma
drm/i915: Don't use MI_STORE_DWORD_IMM on Sandybridge/vcs
drm/i915: Stop touching forcewake following a gen6+ engine reset
MAINTAINERS: drm/i915 has a new maintainer team
drm/i915: Split pin mapping into per platform functions
drm/i915/opregion: let user specify override VBT via firmware load
drm/i915/cnl: Reuse skl_wm_get_hw_state on Cannonlake.
drm/i915/gen10: implement gen 10 watermarks calculations
drm/i915/cnl: Fix LSPCON support.
drm/i915/vbt: ignore extraneous child devices for a port
drm/i915/cnl: Setup PAT Index.
drm/i915/edp: Allow alternate fixed mode for eDP if available.
drm/i915: Add support for drm syncobjs
...
This contains a couple of fixes and improvements for host1x, with some
preparatory work for Tegra186 support.
The remainder is cleanup and minor bugfixes for Tegra DRM along with
enhancements to debuggability.
There have also been some enhancements to the kernel interfaces for
host1x job submissions and support for mmap'ing PRIME buffers directly,
all of which get the interfaces very close to ready for serious work.
-----BEGIN PGP SIGNATURE-----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=ZaxL
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-4.14-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v4.14-rc1
This contains a couple of fixes and improvements for host1x, with some
preparatory work for Tegra186 support.
The remainder is cleanup and minor bugfixes for Tegra DRM along with
enhancements to debuggability.
There have also been some enhancements to the kernel interfaces for
host1x job submissions and support for mmap'ing PRIME buffers directly,
all of which get the interfaces very close to ready for serious work.
* tag 'drm/tegra/for-4.14-rc1' of git://anongit.freedesktop.org/tegra/linux: (21 commits)
drm/tegra: Prevent BOs from being freed during job submission
drm/tegra: gem: Implement mmap() for PRIME buffers
drm/tegra: Support render node
drm/tegra: sor: Trace register accesses
drm/tegra: dpaux: Trace register accesses
drm/tegra: dsi: Trace register accesses
drm/tegra: hdmi: Trace register accesses
drm/tegra: dc: Trace register accesses
drm/tegra: sor: Use unsigned int for register offsets
drm/tegra: hdmi: Use unsigned int for register offsets
drm/tegra: dsi: Use unsigned int for register offsets
drm/tegra: dpaux: Use unsigned int for register offsets
drm/tegra: dc: Use unsigned int for register offsets
drm/tegra: Fix NULL deref in debugfs/iova
drm/tegra: switch to drm_*_get(), drm_*_put() helpers
drm/tegra: Set MODULE_FIRMWARE for the VIC
drm/tegra: Add CONFIG_OF dependency
gpu: host1x: Support sub-devices recursively
gpu: host1x: fix error return code in host1x_probe()
gpu: host1x: Fix bitshift/mask multipliers
...
this cycle has been fairly calm in etnaviv land with most of the action
happening on the userspace side.
Notable changes:
- Improvements to CONFIG option handling to make it harder for users to
shoot themselves in the foot due to kernel misconfiguration.
- Tweaked GEM object population, so that userspace can take considerate
action when memory allocation fails, rather than waking the raging OOM
killer beast.
* 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux:
drm/etnaviv: switch GEM allocations to __GFP_RETRY_MAYFAIL
drm/etnaviv: don't fail GPU bind when CONFIG_THERMAL isn't enabled
drm/etnaviv: switch to drm_*{get,put} helpers
drm/etnaviv: select CMA and DMA_CMA if available
drm/etnaviv: populate GEM objects on cpu_prep
drm/etnaviv: reduce allocation failure message severity
drm/etnaviv: don't trigger OOM killer when page allocation fails
This is the amdkfd pull request for 4.14 merge window.
AMD has started cleaning the pipe and sending patches from their internal
development to the upstream community.
The plan as I understand it is to first get all the non-dGPU patches to
upstream and then move to upstream dGPU support.
The patches here are relevant only for Kaveri and Carrizo.
The following is a summary of the changes:
- Add new IOCTL to set a Scratch memory VA
- Update PM4 headers for new firmware that support scratch memory
- Support image tiling mode
- Remove all uses of BUG_ON
- Various Bug fixes and coding style fixes
* tag 'drm-amdkfd-next-2017-08-18' of git://people.freedesktop.org/~gabbayo/linux: (24 commits)
drm/amdkfd: Implement image tiling mode support v2
drm/amdgpu: Add kgd kfd interface get_tile_config() v2
drm/amdkfd: Adding new IOCTL for scratch memory v2
drm/amdgpu: Add kgd/kfd interface to support scratch memory v2
drm/amdgpu: Program SH_STATIC_MEM_CONFIG globally, not per-VMID
drm/amd: Update MEC HQD loading code for KFD
drm/amdgpu: Disable GFX PG on CZ
drm/amdkfd: Update PM4 packet headers
drm/amdkfd: Clamp EOP queue size correctly on Gfx8
drm/amdkfd: Add more error printing to help bringup v2
drm/amdkfd: Handle remaining BUG_ONs more gracefully v2
drm/amdkfd: Allocate gtt_sa_bitmap in long units
drm/amdkfd: Fix doorbell initialization and finalization
drm/amdkfd: Remove BUG_ONs for NULL pointer arguments
drm/amdkfd: Remove usage of alloc(sizeof(struct...
drm/amdkfd: Fix goto usage v2
drm/amdkfd: Change x==NULL/false references to !x
drm/amdkfd: Consolidate and clean up log commands
drm/amdkfd: Clean up KFD style errors and warnings v2
drm/amdgpu: Remove hard-coded assumptions about compute pipes
...
A few changes, but most notably improving the HDMI support merged in 4.13,
by reporting the DDC adapter as an i2c bus, and by adding CEC support
through the CEC framework.
-----BEGIN PGP SIGNATURE-----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=6GJs
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drm-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next
Allwinner DRM changes for 4.14
A few changes, but most notably improving the HDMI support merged in 4.13,
by reporting the DDC adapter as an i2c bus, and by adding CEC support
through the CEC framework.
* tag 'sunxi-drm-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
sun4i_hdmi: add CEC support
dt-bindings: display: sunxi: Improve endpoint ID scheme readability
drm/sun4i: tcon: remove unused function
drm/sun4i: Remove useless atomic_check
drm/sun4i: Add if statement instead of depends on
drm/sun4i: hdmi: Implement I2C adapter for A10s DDC bus
drm/sun4i: constify drm_plane_helper_funcs
More changes for 4.14. Highlights:
- command submission overhead improvements
- Huge page support for vega10
- physical mode support for mjpeg for asics that don't support UVD vm
- improve ttm_mem_type_manager_func debug
- misc ttm fixes, cleanups
- misc gpuvm cleanups
* 'drm-next-4.14' of git://people.freedesktop.org/~agd5f/linux: (26 commits)
drm/ttm: use reservation_object_trylock in ttm_bo_individualize_resv v2
drm/amdgpu: fix vega10 graphic hang issue in S3 test
drm/amdgpu: bump version for support of UVD MJPEG decode
drm/amdgpu: add MJPEG check for UVD physical mode msg buffer
drm/ttm: Fix accounting error when fail to get pages for pool
drm/amd/amdgpu: expose fragment size as module parameter (v2)
drm/amd/amdgpu: store fragment_size in vm_manager
drm/amdgpu: rename VM invalidated to moved
drm/amdgpu: separate bo_va structure
drm/amdgpu: drop the extra VM huge page flag v2
drm/amdgpu: remove superflous amdgpu_bo_kmap in the VM
drm/amdgpu: cleanup static CSA handling
drm/amdgpu: SHADOW and VRAM_CONTIGUOUS flags shouldn't be used by userspace
drm/amdgpu: save list length when fence is signaled
drm/amdgpu: move vram usage tracking into the vram manager v2
drm/amdgpu: move gtt usage tracking into the gtt manager v2
drm/amdgpu: move debug print into the MM managers
drm/amdgpu: fix incorrect use of the lru_lock
drm/radeon: fix incorrect use of the lru_lock
drm/ttm: make ttm_mem_type_manager_func debug more useful
...
Fixes a false positive from might_sleep(). The reservation object is freshly
initialized, so nobody else can hold the mutex but the function is
called from atomic context.
v2: Correctly invert the check as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mmVGT_INDEX_TYPE has no default value, need to make sure
it's initialized when gfx is initialized.
Signed-off-by: Ken Wang <Ken.Wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Archit requested this backmerge to facilitate merging some patches
depending on changes between -rc2 & -rc5
Signed-off-by: Sean Paul <seanpaul@chromium.org>
The commit 213e08ad60
("drm/i915/bxt: add bxt dsi gpio element support")
enables GPIO support for Broxton based platforms.
While using that API we might get into troubles in the future, because
we can't rely on label name in the driver since vendor firmware might
provide any GPIO pin there, e.g. "reset", and even mark it in _DSD (in
which case the request will fail).
To avoid inconsistency and potential issues we have two options:
a) generate GPIO ACPI mapping table and supply it via
acpi_dev_add_driver_gpios(), or
b) just pass NULL as connection ID.
The b) approach is much simpler and would work since the driver relies
on GPIO indices only. Moreover, the _CRS fallback mechanism, when
requesting GPIO, has been made stricter, and supplying non-NULL
connection ID when neither _DSD, nor GPIO ACPI mapping is present, is
making request fail.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101921
Fixes: f10e4bf663 ("gpio: acpi: Even more tighten up ACPI GPIO lookups")
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Tested-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817105541.63914-1-andriy.shevchenko@linux.intel.com
In a synchronous setup, we may retire the last request before we
complete allocating the next request. As the last request is retired, we
queue a timer to mark the device as idle, and promptly have to execute
ad cancel that timer once we complete allocating the request and need to
keep the device awake. If we rearrange the mark_busy() to occur before
we retire the previous request, we can skip this ping-pong.
v2: Joonas pointed out that unreserve_seqno() was now doing more than
doing seqno handling and should be renamed to reflect its wider purpose.
That also highlighted the new asymmetry with reserve_seqno(), so fixup
that and rename both to [un]reserve_engine().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817144719.10968-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
This was the competing idea long ago, but it was only with the rewrite
of the idr as an radixtree and using the radixtree directly ourselves,
along with the realisation that we can store the vma directly in the
radixtree and only need a list for the reverse mapping, that made the
patch performant enough to displace using a hashtable. Though the vma ht
is fast and doesn't require any extra allocation (as we can embed the node
inside the vma), it does require a thread for resizing and serialization
and will have the occasional slow lookup. That is hairy enough to
investigate alternatives and favour them if equivalent in peak performance.
One advantage of allocating an indirection entry is that we can support a
single shared bo between many clients, something that was done on a
first-come first-serve basis for shared GGTT vma previously. To offset
the extra allocations, we create yet another kmem_cache for them.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170816085210.4199-5-chris@chris-wilson.co.uk
Since the introduction of being able to perform a lockless lookup of an
object (i915_gem_object_get_rcu() in fbbd37b36f ("drm/i915: Move object
release to a freelist + worker") we no longer need to split the
object/vma lookup into 3 phases and so combine them into a much simpler
single loop.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170816085210.4199-4-chris@chris-wilson.co.uk
When userspace is doing most of the work, avoiding relocs (using
NO_RELOC) and opting out of implicit synchronisation (using ASYNC), we
still spend a lot of time processing the arrays in execbuf, even though
we now should have nothing to do most of the time. One issue that
becomes readily apparent in profiling anv is that iterating over the
large execobj[] is unfriendly to the loop prefetchers of the CPU and it
much prefers iterating over a pair of arrays rather than one big array.
v2: Clear vma[] on construction to handle errors during vma lookup
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170816085210.4199-3-chris@chris-wilson.co.uk
Since we keep the context around across the slow lookup where we may
drop the struct_mutex, we should double check that the context is still
valid upon reacquisition.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170816085210.4199-2-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
MI_STORE_DWORD_IMM just doesn't work on the video decode engine under
Sandybridge, so refrain from using it. Then switch the selftests over to
using the now common test prior to using MI_STORE_DWORD_IMM.
Fixes: 7dd4f6729f ("drm/i915: Async GPU relocation processing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.13-rc1+
Link: https://patchwork.freedesktop.org/patch/msgid/20170816085210.4199-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Forcewake is not affected by the engine reset on gen6+. Indeed the
reason why we added intel_uncore_forcewake_reset() to
gen6_reset_engines() was to keep the bookkeeping intact because the
reset did not touch the forcewake bit (yet we cancelled the forcewake
consumers)! This was done in commit 521198a2e7:
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date: Fri Aug 23 16:52:30 2013 +0300
drm/i915: sanitize forcewake registers on reset
In reset we try to restore the forcewake state to
pre reset state, using forcewake_count. The reset
doesn't seem to clear the forcewake bits so we
get warn on forcewake ack register not clearing.
That futzing of the forcewake bookkeeping was dropped in commit
0294ae7b44 ("drm/i915: Consolidate forcewake resetting to a single
function"), but it did not make the realisation that the remaining
intel_uncore_forcewake_reset() was redundant.
The new danger with using intel_uncore_forcewake_reset() with per-engine
resets is that the driver and hw are still in an active state as we
perform the reset. We may be using the forcewake to read protected
registers elsewhere and those results may be clobbered by the concurrent
dropping of forcewake.
Reported-by: Michel Thierry <michel.thierry@intel.com>
Fixes: 142bc7d99b ("drm/i915: Modify error handler for per engine hang recovery")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817173229.20324-1-chris@chris-wilson.co.uk
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
For a bunch of reasons[1] I've decided to step down as maintainer and
let some other folks enjoy the reputation and hang out in the
spotlight.
Jani is going to stick around with his expertise in kms and having
done the fixes flow for a long time now. Joonas will join and bring in
his knowledge on all things GEM. Rodrigo has been less visible because
he's been doing tons of work taking care of the internal branch, and
it'd be good to have more continuity between these two worlds also on
the maintainer side.
1: They all boil down to: This is going to happen sooner or later
anyway, we have a great team, with the process improvements over the
last few years things work rather well, now is as good as any time to
do this. With that change I'll have more time for other aspects of the
stack development than maintainership.
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dave Airlie <airlied@gmail.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170815160101.1683-1-daniel.vetter@ffwll.ch
NULL check at line 528: if (!sender || !data_out || !len_out) {, implies
that pointer _sender_ might be NULL.
Move pointer _sender_ dereference after NULL check in order to avoid a
potential NULL pointer dereference.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170812015515.GA8360@embeddedgus
Cleanup the code. Map the pins in accordance to
individual platforms rather than according to ports.
Create separate functions for platforms.
v2:
- Add missing condition for CoffeeLake. Make platform
specific functions static. Add function
i915_ddc_pin_mapping().
v3:
- Rename functions to x_port_to_ddc_pin() which directly
indicates the purpose. Correct default return values on CNP
and BXT. Rename i915_port_to_ to g4x_port_to since that was
the first platform to run this. Correct code style. (Paulo)
Sugested-by Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1502927114-24012-1-git-send-email-anusha.srivatsa@intel.com
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When fail to get needed page for pool, need to put allocated pages
into pool. But current code has a miscalculation of allocated pages,
correct it.
Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Allow overrides on the command line.
v2: agd: sqaush in spelling fix and bogus default value warning
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
