The NOUVEAU_GETPARAM_PCI_DEVICE case is missing a break statement and falls
through to the following NOUVEAU_GETPARAM_BUS_TYPE case and may end up
re-assigning the getparam->value to an undesired value. Fix this by adding
in the missing break.
Detected by CoverityScan, CID#1460507 ("Missing break in switch")
Fixes: 359088d5b8 ("drm/nouveau: remove trivial cases of nvxx_device() usage")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warning:
drivers/gpu/drm/nouveau/nouveau_bo.c:1434:53: warning: this statement may fall through [-Wimplicit-fallthrough=]
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enabling
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is much louder then we want. VCPI allocation failures are quite
normal, since they will happen if any part of the modesetting process is
interrupted by removing the DP MST topology in question. So just print a
debugging message on VCPI failures instead.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: f479c0ba4a ("drm/nouveau/kms/nv50: initial support for DP 1.2 multi-stream")
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Currently the uninitialized values in the array reply are printed out
when exec is false and nvkm_pmu_send has not updated the array. Avoid
confusion by only dumping out these values if they have been actually
updated.
Detected by CoverityScan, CID#1271291 ("Uninitialized scaler variable")
Fixes: ebb58dc2ef ("drm/nouveau/pmu: rename from pwr (no binary change)")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Currently, the expression for calculating RON is always going to result
in zero no matter the value of ram->mr[1] because the ! operator has
higher precedence than the shift >> operator. I believe the missing
parentheses around the expression before appying the ! operator will
result in the desired result.
[ Note, not tested ]
Detected by CoveritScan, CID#1324005 ("Operands don't affect result")
Fixes: c25bf7b615 ("drm/nouveau/bios/ramcfg: Separate out RON pull value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Don't populate the array vsoff on the stack but instead make it
static. Makes the object code smaller by 67 bytes:
Before:
text data bss dec hex filename
5753 112 0 5865 16e9 .../nouveau/nvkm/subdev/bios/dp.o
After:
text data bss dec hex filename
5622 176 0 5798 16a6 .../nouveau/nvkm/subdev/bios/dp.o
(gcc version 8.2.0 x86_64)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
GF117 appears to use the same register as GK104 (but still with the
general Fermi readout mechanism).
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108980
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlxqHJYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGWl8H/jPI4EipzD2GbnjZ
GaFpMBBjcXBaVmoA+Y69so+7BHx1Ql+5GQtqbK0RHJRb9qEPLw3FBhHNjM/N8Sgf
nSrK+GnBZp9s+k/NR/Yf2RacUR3jhz+Q9JEoQd3u9bFUeQyvE8Rf3vgtoBBwFOfz
+t7N1memYVF3asLGWB4e4sP1YVMGfseTQpSPojvM30YWM86Bv+QtSx1AGgHczQIM
kMKealR8ZPelN6JAXgLhQ5opDojBrE4YKB98pwsMDI6abz0Tz2JLFEUTTxsv5XNN
o/Iz+XDoylskEyxN2unNWfHx7Swkvoklog8J/hDg5XlTvipL/WkT66PHBgcGMNvj
BW9GgU8=
=ZizU
-----END PGP SIGNATURE-----
Merge v5.0-rc7 into drm-next
Backmerging for nouveau and imx that needed some fixes for next pulls.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Passing an object_count of sufficient size will make
object_count * 4 wrap around to be very small, then a later function
will happily iterate off the end of the object_ids array. Using
array_size() will saturate at SIZE_MAX, the kmalloc() will fail and
we'll return an -ENOMEM to the norty userspace.
Fixes: 62884cd386 ("drm: Add four ioctls for managing drm mode object leases [v7]")
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.15+
Signed-off-by: Dave Airlie <airlied@redhat.com>
Don't warn or fail if it's missing.
v2: handle xgmi case more gracefully.
v3: handle older kernels properly
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Tested-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Fix CSI register offsets for i.MX51 and i.MX53.
- Fix delayed page flip completion events on i.MX6QP due to unexpected
behaviour of the PRE when issuing NOP buffer updates to the same
buffer address.
- Stop throwing errors for plane updates on disabled CRTCs when a
userspace process is killed while a plane update is pending.
- Add missing of_node_put cleanup in imx_ldb_bind.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCXGL3ZBcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwDz3AP49Ldp9TuuS/bMHWcZrPXRjiWJO
9lRaWV3mKqMFsAQzswD9Gy0+eybyaPQqRvLXXxwuk7Jrh8or2TOyOqDVeoDC4Q8=
=zCye
-----END PGP SIGNATURE-----
Merge tag 'imx-drm-fixes-2019-02-12' of git://git.pengutronix.de/pza/linux into drm-fixes
drm/imx: plane, ldb, and ipu-v3 fixes
- Fix CSI register offsets for i.MX51 and i.MX53.
- Fix delayed page flip completion events on i.MX6QP due to unexpected
behaviour of the PRE when issuing NOP buffer updates to the same
buffer address.
- Stop throwing errors for plane updates on disabled CRTCs when a
userspace process is killed while a plane update is pending.
- Add missing of_node_put cleanup in imx_ldb_bind.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1549990602.4800.11.camel@pengutronix.de
Starting from opregion version 2.1 (roughly corresponding to ICL+) the
RVDA field is relative from the beginning of opregion, not absolute
address.
Fix the error path while at it.
v2: Make relative vs. absolute conditional on the opregion version,
bumped for the purpose. Turned out there are machines relying on
absolute RVDA in the wild.
v3: Fix the version checks
Fixes: 04ebaadb9f ("drm/i915/opregion: handle VBT sizes bigger than 6 KB")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208184254.24123-2-jani.nikula@intel.com
(cherry picked from commit a0f52c3d35)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The u32 version field encodes major, minor, revision and reserved. We've
basically been checking for any non-zero version.
Add opregion version logging while at it.
v2: Fix the fix of the version check
Fixes: 04ebaadb9f ("drm/i915/opregion: handle VBT sizes bigger than 6 KB")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208184254.24123-1-jani.nikula@intel.com
(cherry picked from commit 98fdaaca95)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Make sure the underlying VMA in the process address space is the
same as it was during vm_mmap to avoid applying WC to wrong VMA.
A more long-term solution would be to have vm_mmap_locked variant
in linux/mmap.h for when caller wants to hold mmap_sem for an
extended duration.
v2:
- Refactor the compare function
Fixes: 1816f92363 ("drm/i915: Support creation of unbound wc user mappings for objects")
Reported-by: Adam Zabrocki <adamza@microsoft.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.0+
Cc: Akash Goel <akash.goel@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Adam Zabrocki <adamza@microsoft.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190207085454.10598-1-joonas.lahtinen@linux.intel.com
(cherry picked from commit 5c4604e757)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When resuming, we check whether or not any previously connected
MST topologies are still present and if so, attempt to resume them. If
this fails, we disable said MST topologies and fire off a hotplug event
so that userspace knows to reprobe.
However, sending a hotplug event involves calling
drm_fb_helper_hotplug_event(), which in turn results in fbcon doing a
connector reprobe in the caller's thread - something we can't do at the
point in which i915 calls drm_dp_mst_topology_mgr_resume() since
hotplugging hasn't been fully initialized yet.
This currently causes some rather subtle but fatal issues. For example,
on my T480s the laptop dock connected to it usually disappears during a
suspend cycle, and comes back up a short while after the system has been
resumed. This guarantees pretty much every suspend and resume cycle,
drm_dp_mst_topology_mgr_set_mst(mgr, false); will be caused and in turn,
a connector hotplug will occur. Now it's Rute Goldberg time: when the
connector hotplug occurs, i915 reprobes /all/ of the connectors,
including eDP. However, eDP probing requires that we power on the panel
VDD which in turn, grabs a wakeref to the appropriate power domain on
the GPU (on my T480s, this is the PORT_DDI_A_IO domain). This is where
things start breaking, since this all happens before
intel_power_domains_enable() is called we end up leaking the wakeref
that was acquired and never releasing it later. Come next suspend/resume
cycle, this causes us to fail to shut down the GPU properly, which
causes it not to resume properly and die a horrible complicated death.
(as a note: this only happens when there's both an eDP panel and MST
topology connected which is removed mid-suspend. One or the other seems
to always be OK).
We could try to fix the VDD wakeref leak, but this doesn't seem like
it's worth it at all since we aren't able to handle hotplug detection
while resuming anyway. So, let's go with a more robust solution inspired
by nouveau: block fbdev from handling hotplug events until we resume
fbdev. This allows us to still send sysfs hotplug events to be handled
later by user space while we're resuming, while also preventing us from
actually processing any hotplug events we receive until it's safe.
This fixes the wakeref leak observed on the T480s and as such, also
fixes suspend/resume with MST topologies connected on this machine.
Changes since v2:
* Don't call drm_fb_helper_hotplug_event() under lock, do it after lock
(Chris Wilson)
* Don't call drm_fb_helper_hotplug_event() in
intel_fbdev_output_poll_changed() under lock (Chris Wilson)
* Always set ifbdev->hpd_waiting (Chris Wilson)
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 0e32b39cee ("drm/i915: add DP 1.2 MST support (v0.7)")
Cc: Todd Previte <tprevite@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.17+
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129191001.442-2-lyude@redhat.com
(cherry picked from commit fe5ec65668)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Enable count array is supposed to have one counter for each possible
engine sampler. As such, array sizing and bounds checking is not correct
and would blow up the asserts if more samplers were added.
No ill-effect in the current code base but lets fix it for correctness.
At the same time tidy the assert for readability and robustness.
v2:
* One check per assert. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: b46a33e271 ("drm/i915/pmu: Expose a PMU interface for perf queries")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190205130353.21105-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 26a11deea6)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
CNL macros for register groups CNL_PORT_TX_DW2_* / CNL_PORT_TX_DW5_* are
configured incorrectly wrt definition of _CNL_PORT_TX_DW_GRP.
v2: Jani suggested to keep the macros organized semantically i.e., by
function, secondarily by port/pipe/transcoder.->(dw, port)
Fixes: 4e53840fdf ("drm/i915/icl: Introduce new macros to get combophy registers")
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190110230844.9213-1-aditya.swarup@intel.com
(cherry picked from commit b14c06ec02)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In August 2018 the BSPEC changed the ICL port programming sequence to
closely resemble earlier gen programming sequence. Restrict combo phy to
HBR max rate unless eDP panel is connected to port.
v2: remove debug code that Imre found
v3: simplify translation table if-else
v4: edp translation table now based on link rate and low_swing
v5: Misc review comments + r-b
BSpec: 21257
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1545084827-5776-1-git-send-email-clinton.a.taylor@intel.com
(cherry picked from commit b265a2a625)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
With drmP.h removed from drm_modeset_helper.h the build of
komeda filed as reported by linux-next
Add missing include files to fix build.
For the files touched group include files and sort them.
The fix was tested on a tree with drm-misc-next merged.
And the patch was also tested to work without drm-misc-next merged.
Build tested on arm + x86.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> [linux-next]
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: James Wang <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208221324.27002-1-sam@ravnborg.org
Bisected guest kernel changes crashing qemu. Landed at
"6c1cd97bda drm/virtio: fix resource id handling". Looked again, and
noticed we where not only leaking *some* ids, but *all* ids. The old
code never ever called virtio_gpu_resource_id_put().
So, commit 6c1cd97bda effectively makes the linux kernel starting
re-using IDs after releasing them, and apparently virglrenderer can't
deal with that. Oops.
This patch puts a temporary stopgap into place for the 5.0 release.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208140409.15280-1-kraxel@redhat.com
- Expose RPCS (SSEU) configuration to userspace for Ice Lake
in order to allow userspace to reconfigure the subslice config
per context basis. (Tvrtko, Lionel)
Driver Changes:
- Execbuf and preemption improvements including selftests (Chris)
- Rename HAS_GMCH_DISPLAY/HAS_GMCH (Rodrigo)
- Debugfs error handling fix for robustness (Greg)
- Improve reg_rw traces (Ville)
- Push clear_intel_crtc_state onto the heap (Chris)
- Watermark fixes for Ice Lake (Ville)
- Fix enable count array size and bounds checking (Tvrtko)
- MST Fixes (Lyude)
- Prevent race and handle error on I915_GEM_MMAP (Joonas)
- Initial rework for an full atomic gamma mode (Ville)
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcXJw7AAoJEPpiX2QO6xPKWuQH/i3o86TqLheae2vdi8X/yp92
XeZbmNfaL7Gui6ggZpRMREjIIiDZ0nFga5INcVtrak6JRjeefb+wQsy38tdb98ne
EPn6eif0nO/uxc7BsdW2ndIDBSWC+ZW7gt4rzY5zLG/WCmX1qfOOS9GdUpXPF3jY
sB8Af6lsGSxrCFkBzUB9Z7AyoP/Yq+YeamFOtXLufhtQb4GL3djjdugaUBBfQmNn
FvZTxhhsXn3HU9Jy1AjRFALhqXvTjZt1L5myav4sCJ2qlsr2dL9y3c7evbO5jrZY
4TSlKUi5XwfW1RlHTQN43fTq7yWFwoF1FsR4LaKS0a8bKIXiBLwset7YA1m6wmY=
=Woo8
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2019-02-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
UAPI Changes:
- Expose RPCS (SSEU) configuration to userspace for Ice Lake
in order to allow userspace to reconfigure the subslice config
per context basis. (Tvrtko, Lionel)
Driver Changes:
- Execbuf and preemption improvements including selftests (Chris)
- Rename HAS_GMCH_DISPLAY/HAS_GMCH (Rodrigo)
- Debugfs error handling fix for robustness (Greg)
- Improve reg_rw traces (Ville)
- Push clear_intel_crtc_state onto the heap (Chris)
- Watermark fixes for Ice Lake (Ville)
- Fix enable count array size and bounds checking (Tvrtko)
- MST Fixes (Lyude)
- Prevent race and handle error on I915_GEM_MMAP (Joonas)
- Initial rework for an full atomic gamma mode (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208165000.GA30314@intel.com
This set of changes starts of with some refactoring of the CEC support
to make it reusable on Tegra210 and later. Following are a couple of
fixes for HDMI audio support (via HDA).
The bulk here is a set of preparatory patches working towards enabling
Tegra186 support for host1x and VIC. Additional patches will be needed
to fully enable this, but they're not quite ready yet.
To round things off, this also adds support for configuring the SOR
crossbar using device tree, and fixes a couple of job-related issues in
the host1x code.
-----BEGIN PGP SIGNATURE-----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=jS/6
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.1-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v5.1-rc1
This set of changes starts of with some refactoring of the CEC support
to make it reusable on Tegra210 and later. Following are a couple of
fixes for HDMI audio support (via HDA).
The bulk here is a set of preparatory patches working towards enabling
Tegra186 support for host1x and VIC. Additional patches will be needed
to fully enable this, but they're not quite ready yet.
To round things off, this also adds support for configuring the SOR
crossbar using device tree, and fixes a couple of job-related issues in
the host1x code.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208144721.25830-1-thierry.reding@gmail.com
Add a warn to verify the hrtimer_forward_now return and changes
ret_overrun from int to u64 to match the return value provided by
hrtimer_forward_now.
Signed-off-by: Shayenne Moura <shayenneluzmoura@gmail.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190206200813.d5w7gjpepoeeadiy@smtp.gmail.com
This patch adds appropriate kernel documentation for DRM DP helpers
used for enabling Display Stream compression functionality in
drm_dp_helper.h and drm_dp_helper.c as well as for the DSC spec
related structure definitions and helpers in drm_dsc.c and drm_dsc.h
Also add links between the functions and structures in the documentation.
v3:
* Fix the checkpatch warnings (Sean Paul)
v2:
* Add inline comments for longer structs (Daniel Vetter)
* Split the summary and description (Daniel Vetter)
Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
Suggested-by: Sean Paul <sean@poorly.run>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Acked-by: Sean Paul <sean@poorly.run>
Reviewed-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190206213148.21390-1-manasi.d.navare@intel.com
P010 is a planar 4:2:0 YUV with interleaved UV plane, 10 bits per
channel video format.
P012 is a planar 4:2:0 YUV 12 bits per channel
P016 is a planar 4:2:0 YUV with interleaved UV plane, 16 bits per
channel video format.
V3: Added P012 and fixed cpp for P010.
V4: format definition refined per review.
V5: Format comment block for each new pixel format.
V6: reversed Cb/Cr order in comments.
v7: reversed Cb/Cr order in comments of header files, remove
the wrong part of commit message.
V8: reversed V7 changes except commit message and rebased.
v9: used the new properties to describe those format and
rebased.
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Randy Li <ayaka@soulik.info>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Ayan Kumar Halder <ayan.halder@arm.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190109195710.28501-2-ayaka@soulik.info
[Why]
It's useful to know the min and max vrr range for IGT testing.
[How]
Expose the min and max vfreq for the connector via a debugfs file
on the connector, "vrr_range".
Example usage: cat /sys/kernel/debug/dri/0/DP-1/vrr_range
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The entity->dependency can go away completely once we've called
drm_sched_entity_add_dependency_cb() (if the cb is called before we
get around to tracing). The tracepoint is more useful if we trace
every dependency instead of just ones that get callbacks installed,
anyway, so just do that.
Fixes any easy-to-produce OOPS when tracing the scheduler on V3D with
"perf record -a -e gpu_scheduler:.\* glxgears" and DEBUG_SLAB enabled.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since the DPHY rework, one error path doesn't set the return error code
before jumping to its error label, which in turns make gcc (rightfully)
complain about the variable holding the error code being uninitialized.
Fix this.
Fixes: bb3b6fcb68 ("sun6i: dsi: Convert to generic phy handling")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208090540.19626-1-maxime.ripard@bootlin.com
- Fixes to omap/dsi encoder.
- Clock fix for sun4i.
- Licensing header fix for rockchip.
- Fix division by zero in the mode when trying to set a mode on
i915 with GVT-g enabled.
-----BEGIN PGP SIGNATURE-----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=ONtd
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2019-02-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.0-rc6:
- Fixes to omap/dsi encoder.
- Clock fix for sun4i.
- Licensing header fix for rockchip.
- Fix division by zero in the mode when trying to set a mode on
i915 with GVT-g enabled.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/84462cef-609f-e2af-084a-f9fe2b05c53e@linux.intel.com
On the D3 and E3 SoCs the LVDS PLL clock output provides the dot clock
to the DU channels, even when the LVDS outputs are not in use. Enable
and disable the LVDS clock output when enabling or disabling a CRTC
connected to the DPAD0 output.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
On the D3 and E3 platforms, the LVDS internal PLL supplies the pixel
clock to the DU. This works automatically for LVDS outputs as the LVDS
encoder is enabled through the bridge API, enabling the internal PLL and
clock output. However, when using the DU DPAD output with the LVDS
outputs turned off, the LVDS PLL needs to be controlled manually. Add an
API to do so, to be called by the DU driver.
The drivers/gpu/drm/rcar-du/ directory has to be treated as obj-y
unconditionally, as the LVDS driver could be built-in while the DU
driver is compiled as a module.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
On the D3 and E3 SoCs the LVDS encoder has an extended internal PLL and
supplies a clock to the DU. That clock is used not only for the LVDS
outputs but also for the DPAD output. The LVDS encoder thus needs to be
available to the DU even when its output is disabled. Don't fail probe
in that case on D3 and E3.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Before the driver fully moved to drm_bridge and drm_panel, it was
necessary to parse DT and locate encoder and connector nodes. The
connector node is now unused and can be removed as a parameter to
rcar_du_encoder_init(). As a consequence rcar_du_encoders_init_one() can
be greatly simplified, removing most of the DT parsing.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
