This is a preperation patch for adding support for control events. Actually
enabling support for control events will be done in a separate patch, as that
depends on the necessary poll changes going upstream
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Somehow the code has ended up assuming 1400 packets/sec which of course
is wrong for usb1 devices like the ov511 cameras. usb1 only does 1000
(isoc) packets / sec.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This got broken by some gscpa core fixes, this patch restores the proper
min/max values for these controls.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Written by Theodore Kilgore
With minor changes by Hans de Goede:
-Code style fixes
-Correct the verbose level on various PDEBUG messages
-Make error messages use pr_err instead of PDEBUG
-Document the jl20 pixel format
Signed-off-by: Theodore Kilgore <kilgota@auburn.edu>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* tag 'v3.2': (83 commits)
Linux 3.2
minixfs: misplaced checks lead to dentry leak
ptrace: ensure JOBCTL_STOP_SIGMASK is not zero after detach
ptrace: partially fix the do_wait(WEXITED) vs EXIT_DEAD->EXIT_ZOMBIE race
Revert "rtc: Expire alarms after the time is set."
[CIFS] default ntlmv2 for cifs mount delayed to 3.3
cifs: fix bad buffer length check in coalesce_t2
Revert "rtc: Disable the alarm in the hardware"
hung_task: fix false positive during vfork
security: Fix security_old_inode_init_security() when CONFIG_SECURITY is not set
fix CAN MAINTAINERS SCM tree type
mwifiex: fix crash during simultaneous scan and connect
b43: fix regression in PIO case
ath9k: Fix kernel panic in AR2427 in AP mode
CAN MAINTAINERS update
net: fsl: fec: fix build for mx23-only kernel
sch_qfq: fix overflow in qfq_update_start()
drm/radeon/kms/atom: fix possible segfault in pm setup
gspca: Fix falling back to lower isoc alt settings
futex: Fix uninterruptible loop due to gate_area
...
This patch implements necessary changes for enabling dm365 and
dm355 hardware for vpbe. The patch contains additional HD mode
support for dm365 (720p60, 1080i30) and appropriate register
modifications based on version numbers.
VPBE_VERSION_2 = dm365 specific
VPBE_VERSION_3 = dm355 specific
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add OSD block changes to enable dm365 and dm355 for vpbe driver.
Changes are based on version number of OSD, which have incremental
changes over 644x OSD hardware interms of few registers.
VPBE_VERSION_2 = dm365 specific
VPBE_VERSION_3 = dm355 specific
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This patch implements the core additions to the display driver,
mainly controlling the VENC and other encoders for dm365.
This patch also includes addition of amplifier subdevice to the
vpbe driver and interfacing with venc subdevice.
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
When using the SN9C20X_I420 fmt the sn9c20x needs more bandwidth
than our regular bandwidth calculations reserve.
This patch adds a sd_isoc_init function, which forces the use of a specific
altsetting when using the SN9C20X_I420 fmt.
This fixes the bottom 10-30% of the image getting corrupted when using
the SN9C20X_I420 fmt (which is the default fmt).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Some cameras will pretty much entirely fill all the image buffers all the
time even though they are using compression.
This patch adds a flag to sd_desc, which drivers for such cameras can set.
When this flag is set the bandwidth calculation code will no longer
assume that the image buffer size is a worst case and less bandwidth than
imagebufsize * fps will be used on average.
This patch sets this new flag for 3 drivers:
* For spca561 (for rev12a cameras) and nw80x cams as these simply don't work
when given less bandwidth than imagebufsize * fps.
* For sn9c20x cameras, because these show severy jpeg artifacts when
given less bandwidth than imagebufsize * fps and since these are usb2
cameras there is plenty bandwidth anyways.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Quoting from the official usb 20 spec:
"5.6.4 Isochronous Transfer Bus Access Constraints
Isochronous transfers can only be used by full-speed and high-speed devices."
This means that for code paths which are isoc mode only, we don't need to
check for the device being low speed, simplifying the code.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Check dev->actconfig rather than dev->config when checking various
configuration things. dev->config points to the array of configs for the
device so dev->config->foo boils down to dev->config[0].foo and the first
config is not necessarily always the active config.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
In case we ever get sub drivers which do 7.5 fps and express this as
15 / 2 fps.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The calculated bandwidth should not be multiplied by the interval, but be
divided by it. Also bInterbval should be interpreted as a power of 2
for isochronous endpoints.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
After the "gspca: Fix bulk mode cameras no longer working (regression fix)"
patch build_ep_tb is no longer being called for bulk endpoints.
This patch renames build_ep_tb to build_isoc_ep_tb to make clear it should
only be called for isoc mode cameras.
This patch also:
- drops the no longer needed xfer parameter
- removes a check for bulk mode from the build_isoc_ep_tb code
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Having:
- a mean image size of 0.375 time the max compressed image size and
- a frame rate of 30 fps for small images or with USB 2.0/3.0
seems more realistic and gives less image freezes.
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This path add support to "OmniVision Technologies, Inc. VEHO Filmscanner".
Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Fix detection of EMP202 audio chip. Some versions have an id of
0x83847650 instead of 0xffffffff
Honestech Vidbox NW03 has a EMP202 audio chip with a different Vendor ID.
Apparently, it is the same with the Gadmei ITV380:
http://linuxtv.org/wiki/index.php/Gadmei_USB_TVBox_UTV380
Signed-off-by: Gareth Williams <gareth@garethwilliams.me.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Support for IT1935 9006 devices.
9006 have version 2 type chip.
9006 devices should use dvb-usb-it9135-02.fw firmware.
On the device tested the tuner id was set to 0 which meant
the driver used tuner id 0x38. The device functioned normally.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Instead of creating two DVB frontend entries for the same device,
create just one entry, and fill the delivery_system according with
the supported standards.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
ops.info.frequency_stepsize is used only for DVB-T & friends. For
DVB-C, the step size is calculated using the symbol rate.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
While this patch change some things, the updated fields there are
used just on printk, so it shouldn't cause any functional changes.
Yet, this routine is a little complex, so explain a little more
how it works.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Instead of changing the ops.info.type struct, updates only
the data that will be returned to userspace.
Also add some debug messages to help tracking such issues.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
WARNING: "__udivdi3" [/home/v4l/new_build/v4l/cx25840.ko] undefined!
64 bits division need to call do_div & friends, in order to allow
it to compile with 32 bits kernels
Cc: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Making the detected video standard available to the core driver
and for user query.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Adding support for the CX23888 DIF.
Changes regression tested against the HVR1700 and HVR1800.
Split out much of the set and init handling of the cx23885 based
cards into their own functions. Added the DIF initialization code
for each supported IF.
Updated the cx23885 code to correctly initialize cx23888 based
video/audio decoders.
Enabled Closed Caption support for CX23885 based cards during
initialization.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The card names are being truncated in the video4linux sys class name file.
Prior to this patch they were shown as:
cx23885[0] mpeg (Hauppauge WinT
cx23885[0] video (Hauppauge WinT
cx23885[0] vbi (Hauppauge WinT
After this patch they are shown as:
Hauppauge WinTV-HVR1850 (video)
Hauppauge WinTV-HVR1850 (mpeg)
Hauppauge WinTV-HVR1850 (vbi)
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Added three new control calls (g_std, querystd and g_ctrl) to
the -417 driver. Also routed other controls through the main
cx23885 driver meaning that the controls for the 417 and the
raw video device all enter the driver code and are handled
in a single place.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
First in a series of patches that adds support to the cx23885 driver
for CX23888 analog video handling. Raw and MPEG video support is
being added for the HVR1850 driver in the patch, and the following
series of patches.
Some basic cx23885 driver cleanup. Partly to add HVR1850 support
and partly to allow -417.c V4L2 calls to be routed through thr
driver core and handled in a single place.
Make a number of core driver functions available to the -417.c
driver to streamline the driver.
Add the analog tuner ops definition so we can reach/tune the
hardware when we need to. Added the tff field so 888 based cards
(which have a weird field ordering issue) can be accomodated
and worked around in the driver.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The CX23888 (HVR1850 and other new cards) contain a DIF which is responsible
for demodulating the audio and video. It's built directly into the CX23888
PCIe bridge. It needs to be enabled and disabled on a per-card and per-input
basis. We pass this flag from the cx23885 core driver to the sub-device
when we need the cx25840 driver to enable/disable with the DIF correctly.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Now, ops->info.type is handled inside the dvb_frontend
core, only for DVBv3 calls, and according with the
delivery system. So, drivers should not care or use it,
otherwise, it may have issues with DVBv5 calls.
The drivers that were still using it were detected via
this small temporary hack:
--- a/include/linux/dvb/frontend.h
+++ b/include/linux/dvb/frontend.h
@@ -29,13 +29,16 @@
#include <linux/types.h>
typedef enum fe_type {
+#if defined(__DVB_CORE__) || !defined (__KERNEL__)
FE_QPSK,
FE_QAM,
FE_OFDM,
FE_ATSC
+#else
+FE_FOOO
+#endif
} fe_type_t;
-
typedef enum fe_caps {
FE_IS_STUPID = 0,
FE_CAN_INVERSION_AUTO = 0x1,
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
While the driver has support for both serial and parallel mode,
There's was way to select serial mode via configuration. Add
a config option for that, while keeping the default in serial mode.
Also, at debug mode, it will now print a message when mpeg is
enabled/disabled, and showing if parallel or serial mode were
selected, helping developers to double-check if the DRX-K is at
the right mode.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
The per-delivery system tables are confusing.
Add an extra table that explains them, and some
dprintk calls, that allows to check if mt2063 driver
is working as expected.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Instead of printing it just for debug purposes, outputs the detected
version at the logs. This may be useful if someone wants to report
a problem.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
While here, improve a few debug messages that helped to track the
issue and may be useful in the future.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This also helps to identify when a device is not initialized,
if the bridge doesn't return an error for a I2C failed transfer.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Instead of crash, return -ENODEV, if the device is not poperly
initialized.
Also, give a second chance for it to initialize, at set_params
calls.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
mt2063.c:1531:12: warning: variable 'ofout' set but not used [-Wunused-but-set-variable]
mt2063.c:1531:6: warning: variable 'ofin' set but not used [-Wunused-but-set-variable]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Several vars at set_parms functions were set, but unused.
Remove them and change the logic to return -EINVAL if the
analog set_param is used for digital mode.
At the analog side, cleans the logic that sets the several
analog standards.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
