Introduce ipa_mem_id_valid(), and use it to check defined memory
regions to ensure they are valid for a given version of IPA.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a new function that indicates whether a given memory
region is required for a given version of IPA hardware. Use it to
verify that all required regions are present during initialization.
Reorder the definitions of the memory region IDs to be based on
the version in which they're first defined. Use "+" rather than
"and above" where defining the IPA versions in which memory IDs are
used, and indicate which regions are optional (many are not).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass the memory configuration data array to ipa_mem_valid() for
validation, and use that rather than assuming it's already been
recorded in the IPA structure. Move the memory data array size
check into ipa_mem_valid().
Call ipa_mem_valid() early in ipa_mem_init(), and only proceed with
assigning the memory array pointer and size if it is found to be
valid.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the memory region validation check so it happens earlier when
initializing the driver, at init time rather than config time (i.e.,
before access to hardware is required).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The only thing done by ipa_mem_valid_one() that requires hardware
access is the check for whether all regions fit within the size of
IPA local memory specified by an IPA register.
Introduce ipa_mem_size_valid() to implement this verification and
stop doing so in ipa_mem_valid_one(). Call the new function from
ipa_mem_config() (which is also the caller of ipa_mem_valid()).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, memory regions are validated in the loop that initializes
them. Instead, validate them separately.
Rename ipa_mem_valid() to be ipa_mem_valid_one(). Define a *new*
function named ipa_mem_valid() that performs validation of the array
of memory regions provided. This function calls ipa_mem_valid_one()
for each region in turn.
Skip validation for any "empty" region descriptors, which have zero
size and are not preceded by any canary values. Issue a warning for
such descriptors if the offset is non-zero.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Do memory region descriptor validation unconditionally, rather than
having it depend on IPA_VALIDATION being defined.
Pass the address of a memory region descriptor rather than a memory
ID to ipa_mem_valid().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Store the memory region ID in the memory descriptor structure. This
is a move toward *not* indexing the array by the ID, but for now we
must still specify those index values. Define an explicitly
undefined region ID, value 0, so uninitialized entries in the array
won't use an otherwise valid ID.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Define a new pseudo memory region identifer that specifies the
offset at the end of IPA resident memory. Use it instead of
IPA_MEM_UC_EVENT_RING in places where the size of that region was
defined to be 0.
The size of the IPA_MEM_END_MARKER pseudo region must be zero.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The return code variable rc is being set to return error values in two
places in sja1105_mdiobus_base_tx_register and yet it is not being
returned, the function always returns 0 instead. Fix this by replacing
the return 0 with the return code rc.
Addresses-Coverity: ("Unused value")
Fixes: 5a8f09748e ("net: dsa: sja1105: register the MDIO buses for 100base-T1 and 100base-TX")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To support XDP, a headroom is prepended to the packet data.
Consider this offset when doing a prefetch.
Fixes: da5ec7f22a ("net: stmmac: refactor stmmac_init_rx_buffers for stmmac_reinit_rx_buffers")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The call to mlxsw_thermal_module_temp_and_thresholds_get passes a NULL
pointer for the temperature and this can be dereferenced in this function
if the mlxsw_reg_query call fails. The simplist fix is to pass the
address of dummy temperature variable instead of a NULL pointer.
Addresses-Coverity: ("Explicit null dereferenced")
Fixes: 72a64c2fe9 ("mlxsw: thermal: Read module temperature thresholds using MTMP register")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit e1d9a90a9b ("net: ethernet: rmnet: Support for ingress MAPv5
checksum offload") broke ingress handling for devices where
RMNET_FLAGS_INGRESS_MAP_CKSUMV5 or RMNET_FLAGS_INGRESS_MAP_CKSUMV4 are
not set. Unless either of these flags are set, the MAP header is not
removed. This commit restores the original logic by ensuring that the
MAP header is removed for all MAP packets.
Fixes: e1d9a90a9b ("net: ethernet: rmnet: Support for ingress MAPv5 checksum offload")
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sparse tool complains as follows:
drivers/net/ethernet/amazon/ena/ena_netdev.c:978:13: warning:
symbol 'ena_alloc_map_page' was not declared. Should it be static?
This symbol is not used outside of ena_netdev.c, so marks it static.
Fixes: 947c54c395 ("net: ena: Use dev_alloc() in RX buffer allocation")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The comparisons of the u16 values priv->phycr1 and priv->phycr2 to less
than zero always false because they are unsigned. Fix this by using an
int for the assignment and less than zero check.
Addresses-Coverity: ("Unsigned compared against 0")
Fixes: 0a4355c2b7 ("net: phy: realtek: add dt property to disable CLKOUT clock")
Fixes: d90db36a9e ("net: phy: realtek: add dt property to enable ALDPS mode")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are missing { } around a block of code on an if statement. Fix this
by adding them in.
Addresses-Coverity: ("Nesting level does not match indentation")
Fixes: 46682cb86a ("net: stmmac: enable Intel mGbE 2.5Gbps link speed")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matteo Croce says:
====================
mvpp2: prefetch data early
These two patches prefetch some data from RAM so to reduce stall
and speedup the packet processing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Most of the time during the RX is caused by the compound_head() call
done at the end of the RX loop:
│ build_skb():
[...]
│ static inline struct page *compound_head(struct page *page)
│ {
│ unsigned long head = READ_ONCE(page->compound_head);
65.23 │ ldr x2, [x1, #8]
Prefetch the page struct as soon as possible, to speedup the RX path
noticeabily by a ~3-4% packet rate in a drop test.
│ build_skb():
[...]
│ static inline struct page *compound_head(struct page *page)
│ {
│ unsigned long head = READ_ONCE(page->compound_head);
17.92 │ ldr x2, [x1, #8]
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the RX buffer, the received data starts after a headroom used to
align the IP header and to allow prepending headers efficiently.
The prefetch() should take this into account, and prefetch from
the very start of the received data.
We can see that ether_addr_equal_64bits(), which is the first function
to access the data, drops from the top of the perf top output.
prefetch(data):
Overhead Shared Object Symbol
11.64% [kernel] [k] eth_type_trans
prefetch(data + MVPP2_MH_SIZE + MVPP2_SKB_HEADROOM):
Overhead Shared Object Symbol
13.42% [kernel] [k] build_skb
10.35% [mvpp2] [k] mvpp2_rx
9.35% [kernel] [k] __netif_receive_skb_core
8.24% [kernel] [k] kmem_cache_free
7.97% [kernel] [k] dev_gro_receive
7.68% [kernel] [k] page_pool_put_page
7.32% [kernel] [k] kmem_cache_alloc
7.09% [mvpp2] [k] mvpp2_bm_pool_put
3.36% [kernel] [k] eth_type_trans
Also, move the eth_type_trans() call a bit down, to give the RAM more
time to prefetch the data.
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commits:
- 7624115420
nvme: NVME_TCP_OFFLOAD should not default to m
- 5ff5622ea1:
Merge branch 'NVMeTCP-Offload-ULP'
As requested on the mailing-list: https://lore.kernel.org/netdev/SJ0PR18MB3882C20793EA35A3E8DAE300CC379@SJ0PR18MB3882.namprd18.prod.outlook.com/
This patch will revert the nvme-tcp-offload ULP from net-next.
The nvme-tcp-offload ULP series will continue to be considered only on
linux-nvme@lists.infradead.org.
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The comparison of the u16 priv->phy_addr < 0 is always false because
phy_addr is unsigned. Fix this by assigning the return from the call
to function asix_read_phy_addr to int ret and using this for the
less than zero error check comparison.
Fixes: 7e88b11a86 ("net: usb: asix: refactor asix_read_phy_addr() and handle errors on return")
Addresses-Coverity: ("Unsigned compared against 0")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The comparison of the u16 priv->phy_addr < 0 is always false because
phy_addr is unsigned. Fix this by assigning the return from the call
to function asix_read_phy_addr to int ret and using this for the
less than zero error check comparison.
Addresses-Coverity: ("Unsigned compared against 0")
Fixes: e532a096be ("net: usb: asix: ax88772: add phylib support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Add nfgenmsg field to nfnetlink's struct nfnl_info and use it.
2) Remove nft_ctx_init_from_elemattr() and nft_ctx_init_from_setattr()
helper functions.
3) Add the nf_ct_pernet() helper function to fetch the conntrack
pernetns data area.
4) Expose TCP and UDP flowtable offload timeouts through sysctl,
from Oz Shlomo.
5) Add nfnetlink_hook subsystem to fetch the netfilter hook
pipeline configuration, from Florian Westphal. This also includes
a new field to annotate the hook type as metadata.
6) Fix unsafe memory access to non-linear skbuff in the new SCTP
chunk support for nft_exthdr, from Phil Sutter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In normal situations where the driver doesn't dereference
"nsim_node->ddir" or "nsim_node->rate_parent" itself then we are not
supposed to check the return from debugfs functions. In the case of
debugfs_create_dir() the check was wrong as well because it doesn't
return NULL, it returns error pointers.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The WARN_ON() macro takes a condition, it doesn't take a message. Use
WARN() instead.
Fixes: 1897db2ec3 ("devlink: Allow setting tx rate for devlink rate leaf objects")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This code check "reg" but "ret" was intended so the error handling will
never trigger.
Fixes: 7c9896e378 ("net: dsa: qca8k: check return value of read functions correctly")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The "hi" variable is a u64 but the qca8k_read() writes to the top 32
bits of it. That will work on little endian systems but it's a bit
subtle. It's cleaner to make declare "hi" as a u32. We will still need
to cast it when we shift it later on in the function but that's fine.
Fixes: 7c9896e378 ("net: dsa: qca8k: check return value of read functions correctly")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peng Li says:
====================
net: lapbether: clean up some code style issues
This patchset clean up some code style issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the chackpatch.pl,
line length of 123 exceeds 100 columns, so fix it.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to the chackpatch.pl, comparison to NULL could
be written "lapbeth_get_x25_dev".
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Networking block comments don't use an empty /* line,
use /* Comment...
Block comments use * on subsequent lines.
Block comments use a trailing */ on a separate line.
This patch fixes the comments style issues.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes unnecessary out of memory message,
to fix the following checkpatch.pl warning:
"WARNING: Possible unnecessary 'out of memory' message"
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes trailing whitespaces.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Should not use assignment in if condition.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the checkpatch error about missing a blank line
after declarations.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using list_move_tail() instead of list_del() + list_add_tail() in hclge_main.c.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using list_move_tail() instead of list_del() + list_add_tail() in hclgevf_main.c.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using list_move() instead of list_del() + list_add() in nfp_cppcore.c.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use devm_platform_get_and_ioremap_resource() to simplify
code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit ca89319483 ("net: dsa: b53: Keep CPU port as tagged in all
VLANs") forced the CPU port to be always tagged in any VLAN membership.
This was necessary back then because we did not support Broadcom tags
for all configurations so the only way to differentiate tagged and
untagged traffic while DSA_TAG_PROTO_NONE was used was to force the CPU
port into being always tagged.
With most configurations enabling Broadcom tags, especially after
8fab459e69 ("net: dsa: b53: Enable Broadcom tags for 531x5/539x
families") we do not need to apply this unconditional force tagging of
the CPU port in all VLANs.
A helper function is introduced to faciliate the encapsulation of the
specific condition requiring the CPU port to be tagged in all VLANs and
the dsa_switch_ops::untag_bridge_pvid boolean is moved to when
dsa_switch_ops::setup is called when we have already determined the
tagging protocol we will be using.
Reported-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
coverity scanner says:
2187 if (nft_is_base_chain(chain)) {
vvv CID 1505166: Memory - corruptions (UNINIT)
vvv Using uninitialized value "basechain".
2188 basechain->ops.hook_ops_type = NF_HOOK_OP_NF_TABLES;
... I don't see how nft_is_base_chain() can evaluate to true
while basechain pointer is garbage.
However, it seems better to place the NF_HOOK_OP_NF_TABLES annotation
in nft_basechain_hook_init() instead.
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1505166 ("Memory - corruptions")
Fixes: 65b8b7bfc5284f ("netfilter: annotate nf_tables base hook ops")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nfnetlink_hook.c: In function 'nfnl_hook_put_nft_chain_info':
nfnetlink_hook.c:76:7: error: implicit declaration of 'nft_is_active'
This macro is only defined when NF_TABLES is enabled.
While its possible to also add an ifdef-guard, the infrastructure
is currently not useful without nf_tables.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 252956528caa ("netfilter: add new hook nfnl subsystem")
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently the array net->nf.hooks_ipv6 is accessed by index hook
before hook is sanity checked. Fix this by moving the sanity check
to before the array access.
Addresses-Coverity: ("Out-of-bounds access")
Fixes: e2cf17d377 ("netfilter: add new hook nfnl subsystem")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
