Separate the drm_mm_node walking from the actual handling.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Oak Zeng <Oak.Zeng@amd.com>
Tested-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Separate the drm_mm_node walking from the actual handling.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Oak Zeng <Oak.Zeng@amd.com>
Tested-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Separate the drm_mm_node walking from the actual handling.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Oak Zeng <Oak.Zeng@amd.com>
Tested-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Separate the drm_mm_node walking from the actual handling.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Oak Zeng <Oak.Zeng@amd.com>
Tested-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Separate the drm_mm_node walking from the actual handling.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Oak Zeng <Oak.Zeng@amd.com>
Tested-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allows to walk over the drm_mm nodes in a TTM resource object.
v2: squash in fix from Felix
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Oak Zeng <Oak.Zeng@amd.com>
Tested-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cleanup pdb0 bo before bo_fini gets called
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
new member introduced in umc_info v3_3 to indicate
ECC capability
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. make function mmhub_v1_7_setup_vm_pt_regs static
2. indent a if statement
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ioremap_cache is not supported on some architecture
such as s390. Put the codes into a #ifdef to fix
some compile error reported by test robot.
v2: squash in non-x86 fix
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reported-by: Kernel test robot <lkp@intel.com>
Reviewed-by: Christian Konig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 73bf5cad26.
Fixed in newer firmware
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Using 'imply AMD_IOMMU_V2' does not guarantee that the driver can link
against the exported functions. If the GPU driver is built-in but the
IOMMU driver is a loadable module, the kfd_iommu.c file is indeed
built but does not work:
x86_64-linux-ld: drivers/gpu/drm/amd/amdkfd/kfd_iommu.o: in function `kfd_iommu_bind_process_to_device':
kfd_iommu.c:(.text+0x516): undefined reference to `amd_iommu_bind_pasid'
x86_64-linux-ld: drivers/gpu/drm/amd/amdkfd/kfd_iommu.o: in function `kfd_iommu_unbind_process':
kfd_iommu.c:(.text+0x691): undefined reference to `amd_iommu_unbind_pasid'
x86_64-linux-ld: drivers/gpu/drm/amd/amdkfd/kfd_iommu.o: in function `kfd_iommu_suspend':
kfd_iommu.c:(.text+0x966): undefined reference to `amd_iommu_set_invalidate_ctx_cb'
x86_64-linux-ld: kfd_iommu.c:(.text+0x97f): undefined reference to `amd_iommu_set_invalid_ppr_cb'
x86_64-linux-ld: kfd_iommu.c:(.text+0x9a4): undefined reference to `amd_iommu_free_device'
x86_64-linux-ld: drivers/gpu/drm/amd/amdkfd/kfd_iommu.o: in function `kfd_iommu_resume':
kfd_iommu.c:(.text+0xa9a): undefined reference to `amd_iommu_init_device'
x86_64-linux-ld: kfd_iommu.c:(.text+0xadc): undefined reference to `amd_iommu_set_invalidate_ctx_cb'
x86_64-linux-ld: kfd_iommu.c:(.text+0xaff): undefined reference to `amd_iommu_set_invalid_ppr_cb'
x86_64-linux-ld: kfd_iommu.c:(.text+0xc72): undefined reference to `amd_iommu_bind_pasid'
x86_64-linux-ld: kfd_iommu.c:(.text+0xe08): undefined reference to `amd_iommu_set_invalidate_ctx_cb'
x86_64-linux-ld: kfd_iommu.c:(.text+0xe26): undefined reference to `amd_iommu_set_invalid_ppr_cb'
x86_64-linux-ld: kfd_iommu.c:(.text+0xe42): undefined reference to `amd_iommu_free_device'
Use IS_REACHABLE to only build IOMMU-V2 support if the amd_iommu symbols
are reachable by the amdkfd driver. Output a warning if they are not,
because that may not be what the user was expecting.
Fixes: 64d1c3a43a ("drm/amdkfd: Centralize IOMMUv2 code and make it conditional")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gfx_v8_0_parse_sq_irq() is using in_task() to distinguish if it is
invoked from a workqueue worker or directly from the interrupt handler.
The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.
gfx_v8_0_parse_sq_irq() is invoked directly either from a worker or from
the interrupt service routine. The worker is only bypassed if the worker
is already busy.
Add an argument `from_wq' to gfx_v8_0_parse_sq_irq() which is true if
invoked from the worker.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gfx_v9_0_get_gpu_clock_counter() acquires a mutex_t lock and is the only
caller of gfx_v9_0_kiq_read_clock().
If it safe to acquire a mutex_t then gfx_v9_0_get_gpu_clock_counter() is
always invoked from preemptible context.
Remove in_interrupt() because it superfluous as it will always return
false.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The usage of in_interrupt() in gmc_v*_process_interrupt() is intended to
use a different code path if invoked from the interrupt handler vs
invoked from the workqueue.
The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.
gmc_v*_process_interrupt() is invoked via the ->process() callback
from amdgpu_ih_process() which in turn is invoked either from
amdgpu_irq_handler() (the interrupt handler) or from
amdgpu_irq_handle_*() which is a workqueue.
amdgpu_irq::ih is always processed from the interrupt handler, the other
three struct amdgpu_ih_ring members are processed from a workqueue.
Replace the in_interrupt() check with a comparison against adev->irq.ih.
A similar check is already done to check if the ih pointer is from
ih_soft.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a spelling mistake in a drm debug message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Was added in newer versions of the firmware. Add support
for it.
v2: return an error in SMU error, drop needless break.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On some Intel platforms, audio noise can be detected due to
high pcie speed switch latency.
This patch leaverages ppfeaturemask to fix to the highest pcie
speed then disable pcie switching.
v2:
coding style fix
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In gpu reset, XGMI TA unload will cause gpu hang.
Skip it on A+A aldebaran.
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'drm/drm_hdcp.h' included in 'amdgpu_dm.c' is duplicated.
Reported-by: Zhang Yunkai <zhang.yunkai@zte.com.cn>
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 51713e4e54.
The duplicate from #79 should be removed instead.
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU introduce the new interface to enable light Secondary Bus Reset mode, driver
enable it on passthrough + XGMI configuration
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This new MSG provide the interface for driver to enable/disable the Light Secondary Bus Reset
support from SMU. When enabled, SMU will only do minimum NBIO response to the SBR request and
leave the real HW reset to be handled by driver later. When disabled (default state),SMU will
pass the request to PSP for a HW reset
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Read eeprom through SMU doesn't works stable on XGMI reset during test.
skip it for now
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
CONFIG_DRM_AMD_DC_DCN3_0 has been folded into
CONFIG_DRM_AMD_DC_DCN and is not needed.
[How]
Drop CONFIG_DRM_AMD_DC_DCN3_0.
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The "/ 10" should be applied to the right-hand operand instead of
the left-hand one.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Noticed-by: Georgios Toptsidis <gtoptsid@gmail.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This recent change introduce SDMA interrupt info printing with irq->process function.
These functions do not require a set function to enable/disable the irq
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently the pcie dpm has two problems.
1. Only the high dpm level speed/width can be overrided
if the requested values are out of the pcie capability.
2. The high dpm level is always overrided though sometimes
it's not necesarry.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add IH function to allow caller to wait until ring entries are processed
until the checkpoint write pointer.
This will be primarily used by HMM to drain pending page fault interrupts
before memory unmap to prevent HMM from handling stale interrupts.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DC needs to communicate with PM FW through GPU memory. In order
to do so we need to be able to allocate memory from within DC.
[How]
Call amdgpu_bo_create_kernel to allocate GPU memory and use a
list in amdgpu_display_manager to track our allocations so we
can clean them up later.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For DGPU Navi, the wm_table.nv_entries are used. These entires are not
populated for DCN301 Vangogh APU, but instead wm_table.entries are.
[How]
Use DCN21 Renoir style wm calculations.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
FB BO should not be ttm_bo_type_kernel type and
amdgpufb_create_pinned_object() pins the FB BO anyway.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In passthrough configuration, hypervisior will trigger the SBR(Secondary bus reset) to the devices
without sync to each other. This could cause device hang since for XGMI configuration, all the devices
within the hive need to be reset at a limit time slot. This serial of patches try to solve this issue
by co-operate with new SMU which will only do minimum house keeping to response the SBR request but don't
do the real reset job and leave it to driver. Driver need to do the whole sw init and minimum HW init
to bring up the SMU and trigger the reset(possibly BACO) on all the ASICs at the same time
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Andrey Grodzovsky andrey.grodzovsky@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The gmc.xgmi.head list originally is designed for device list in the XGMI hive. Mix use it
for reset purpose will prevent the reset function to adjust XGMI device list which is required
in next change
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Andrey Grodzovsky andrey.grodzovsky@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The MQD might not be initialized duirng first init period if the device need to be reset
druing probe. Driver need to proper init them in gpu recovery period
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu driver may be in reset state during init which will not initialize the kfd,
driver need to initialize the KFD after reset by check the flag
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit d86fd724e5.
Disable PSP RAP L0 self test until to RAP feature ready.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To initialize the framebuffer, call drm_gem_fb_init_with_funcs which
verifies that the BO size can fit the FB size by calculating the minimum
expected size of each plane.
The bug was caught using igt-gpu-tools test: kms_addfb_basic.too-high
and kms_addfb_basic.bo-too-small
Tested on ChromeOS Zork by turning on the display and running a YT
video.
=== Changes from v1 ===
1. Added new line under declarations.
2. Use C style comment.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Mark Yacoub <markyacoub@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'dce110_resource.h' included in 'dcn21_resource.c' is duplicated.
'hw_gpio.h' included in 'hw_factory_dce110.c' is duplicated.
Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'drm/drm_hdcp.h' included in 'amdgpu_dm.c' is duplicated.
It is also included in the 79th line.
Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When bitmap_empty() or feature->feature_num triggers an error,
no error return code of smu_v11_0_set_allowed_mask() is assigned.
To fix this bug, ret is assigned with -EINVAL as error return code.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The registers for the address of the cursor are aligned to 2KB, so all
cursor surfaces also need to be aligned to 2KB. Currently, the
provided cursor cache surface is not aligned, so we need a workaround
until alignment is enforced by the surface provider.
[How]
- round up surface address to nearest multiple of 2048
- current policy is to provide a much bigger cache size than
necessary,so this operation is safe
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Using values provided by DF for latency may cause hangs in
multi display configurations. Revert change to previous value.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Haonan Wang <Haonan.Wang2@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Panel control always programs instance 0. With multi eDP we need to
support multiple instances.
[How]
Use link index to set different instances for panel control.
Refactored LVTMA control to support multiple instances.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add comments to better describe the function of different cmds
and parameters in the dmub interface
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
