Several major vendor USB-C->HDMI converters, in particular the DA200,
fail to recover a 5.4 GHz 1 lane signal if the link N is greater than
0x80000.
The link M and N depend on the pixel clock and link clock ratio. With
current code link N exceeds 0x80000 only when link clock >= 540000
kHz. Except for the eDP intermediate link clocks, at least the four
least significant bits are always zero. Just one bit shift right would
be enough to bring even the DP 1.4 810000 kHz link clock under 0x80000
link N. The pixel clock for modes that require a link clock >= 540000
kHz would also have several least significant bits zero. Unless the user
provides a mode with an odd pixel clock value, we can reduce the numbers
to reach the goal, with no loss in precision.
The DP spec even mentions sources making choices that "allow for static
and relatively small Mvid and Nvid values", thus reducing the link M/N
regardless of the sink in question seems justified.
Everything here is based on the work and information gathered by Clint
Taylor <clinton.a.taylor@intel.com>. This is just an iteration to reduce
the parameters regardless of lane count, link rate, or sink.
Reference: http://patchwork.freedesktop.org/patch/msgid/1490225256-11667-1-git-send-email-clinton.a.taylor@intel.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93578
Tested-by: Mads <mads@ab3.no>
Tested-by: PJ <foobar@pjmodos.net>
Tested-by: François Guerraz <kubrick@fgv6.net>
Tested-by: Lev Popov <leo@nabam.net>
Tested-by: Igor Krivenko <igor.s.krivenko@gmail.com>
Tested-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490614405-23337-1-git-send-email-jani.nikula@intel.com
Capturing GPU state requires the device to be awake in order to read
registers. Normally, this is taken along the error handler, but for the
direct debugfs access, we cannot make assumptions about the current
device state and so either need to wake it up, or abort.
Fixes: 5a4c6f1b1b ("drm/i915: The return of i915_gpu_info to debugfs")
Testcase: igt/pm_rpm/debugfs-read
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170328131407.14863-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
We don't expect the core runtime PM get helpers to return any error, so
add a WARN for this. Also print the return value for all the callsites
to help debugging.
v2:
- Don't call pm_runtime_get_sync() as part of initing locals. (Chris)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1490693935-12638-1-git-send-email-imre.deak@intel.com
SRCU uses a delayed work item. Skip cleaning it up, and
the result is use-after-free in the work item callbacks.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Fixes: 0eb05bf290
Reviewed-by: Xiao Guangrong <xiaoguangrong.eric@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't throw a warning if we are given an invalid property id. While
here let's also bring back Robert' original idea of catching unhandled
enumeration values at compile time.
Fixes: eec688e142 ("drm/i915: Add i915 perf infrastructure")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Robert Bragg <robert@sixbynine.org>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327203236.18276-1-matthew.auld@intel.com
On Power8 & Power9 the early CPU inititialisation in __init_HFSCR()
turns on HFSCR[TM] (Hypervisor Facility Status and Control Register
[Transactional Memory]), but that doesn't take into account that TM
might be disabled by CPU features, or disabled by the kernel being built
with CONFIG_PPC_TRANSACTIONAL_MEM=n.
So later in boot, when we have setup the CPU features, clear HSCR[TM] if
the TM CPU feature has been disabled. We use CPU_FTR_TM_COMP to account
for the CONFIG_PPC_TRANSACTIONAL_MEM=n case.
Without this a KVM guest might try use TM, even if told not to, and
cause an oops in the host kernel. Typically the oops is seen in
__kvmppc_vcore_entry() and may or may not be fatal to the host, but is
always bad news.
In practice all shipping CPU revisions do support TM, and all host
kernels we are aware of build with TM support enabled, so no one should
actually be able to hit this in the wild.
Fixes: 2a3563b023 ("powerpc: Setup in HFSCR for POWER8")
Cc: stable@vger.kernel.org # v3.10+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
[mpe: Rewrite change log with input from Sam, add Fixes/stable]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The nested_ept_enabled flag introduced in commit 7ca29de213 was not
computed correctly. We are interested only in L1's EPT state, not the
the combined L0+L1 value.
In particular, if L0 uses EPT but L1 does not, nested_ept_enabled must
be false to make sure that PDPSTRs are loaded based on CR3 as usual,
because the special case described in 26.3.2.4 Loading Page-Directory-
Pointer-Table Entries does not apply.
Fixes: 7ca29de213 ("KVM: nVMX: fix CR3 load if L2 uses PAE paging and EPT")
Cc: qemu-stable@nongnu.org
Reported-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
or VM memory are not put thus leaked in kvm_iommu_unmap_memslots() when
destroy VM.
This is consistent with current vfio implementation.
Signed-off-by: herongguang <herongguang.he@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds description about 'scdc' variable in drm_hdmi_info
structure, to fix this warning during doc-build.
"drm_connector.h:140: warning: No description found for parameter 'scdc'"
V2: Rebase
V3: Added extra *
V4: Removed merged conflict
V5: Removed extra line at start of structure (Daniel)
V6: Make description single line (Daniel)
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1490684779-21633-1-git-send-email-shashank.sharma@intel.com
The code introduced by commit 0c8893c9095d ("clockevents: Add a
clkevt-of mechanism like clksrc-of") refer to __clkevt_of_table
what doesn't exist in the vmlinux. As a result kernel build
failed with error: "clkevt-probe.c:63: undefined reference to
`__clkevt_of_table’"
Fixes: 0c8893c9095d ("clockevents: Add a clkevt-of mechanism like clksrc-of")
Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The patch fix syntax errors introduced by commit 0c8893c9095d
("clockevents: Add a clkevt-of mechanism like clksrc-of").
Fixes: 0c8893c9095d ("clockevents: Add a clkevt-of mechanism like clksrc-of")
Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJY2C9qAAoJEHm+PkMAQRiGaBQIAIGzdlZ6ImiP6zoukrRv7qUr
44ITm0lsBiL85QGedhQQL+Y9UqwUmlqgFqnH0Gr8YHNbLJWXzdjGbl5aVo4KjASq
104NLUDXtPww/xZdH4wJMzhuwucYwZOUyDOjOr0ak3cGxOE2xjNjHMZXxWUf20GO
EpRr6WhV1DUAvAdjdNa9KlcOjMluNpMLLyL1CFLjrkkArrWAyqOURKHAb6ZLghfv
iZV1qJTVPyYGpnlI3kuEgu2GuDjxqpoNLSr3wHyEHm/pBPEl7MX6zPbzcegBV8TY
cRRlXo4notdsuknmSNcj0hHuTQvw1kl7BhieLKVsnCyCIM6jjX4TSQZFutmbzwM=
=5iRl
-----END PGP SIGNATURE-----
Backmerge tag 'v4.11-rc4' into drm-next
Linux 4.11-rc4
The i915 GVT team need the rc4 code to base some more code on.
If we were to ever encounter a sample_flags mismatch we need to ensure
we destroy the stream when we bail.
Fixes: d79651522e ("drm/i915: Enable i915 perf stream for Haswell OA unit")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327203459.18398-1-matthew.auld@intel.com
Geminilake has a native HDMI 2.0 controller, which is capable of
driving clocks upto 594Mhz. This patch updates the max tmds clock
limit for the same.
V2: rebase
V3: rebase
V4: added r-b from Ander
V5: rebase
V6: rebase
V7: rebase
V8: rebase
V9: rebase
V10: rebase
Cc: Ander Conselvan De Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Ander Conselvan De Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-7-git-send-email-shashank.sharma@intel.com
Geminilake platform sports a native HDMI 2.0 controller, and is
capable of driving pixel-clocks upto 594Mhz. HDMI 2.0 spec
mendates scrambling for these higher clocks, for reduced RF footprint.
This patch checks if the monitor supports scrambling, and if required,
enables it during the modeset.
V2: Addressed review comments from Ville:
- Do not track scrambling status in DRM layer, track somewhere in
driver like in intel_crtc_state.
- Don't talk to monitor at such a low layer, set monitor scrambling
in intel_enable_ddi() before enabling the port.
V3: Addressed review comments from Jani
- In comments, function names, use "sink" instead of "monitor",
so that the implementation could be close to the language of
HDMI spec.
V4: Addressed review comment from Maarten
- scrambling -> hdmi_scrambling
- high_tmds_clock_ratio -> hdmi_high_tmds_clock_ratio
V5: Addressed review comments from Ville and Ander
- Do not modifiy the crtc_state after compute_config. Move all
scrambling and tmds_clock_ratio calcutations to compute_config.
- While setting scrambling for source/sink, do not check the
conditions again, just go by the crtc_state flags. This will
simplyfy the condition checks.
V6: Addressed review comments from Ville
- Do not add IS_GLK check in disable/enable function, instead add it
in compute_config, while setting state flags.
- Remove unnecessary paranthesis.
- Simplyfy handle_sink_scrambling function as suggested.
- Add readout code for scrambling status in get_ddi_config and add a
check for the same in pipe_config_compare.
V7: Addressed review comments from Ander/Ville
- No separate function for source scrambling, make it inline
- Align the last line of the macro TRANS_DDI_HDMI_SCRAMBLING_MASK
- Do not add platform check while setting source scrambling
- Use pipe_config instead of crtc->config to set sink scrambling
- To readout scrambling status, Compare with SCRAMBLING_MASK
not any of its bits
- Remove platform check in intel_pipe_config_compare while checking
scrambling status
V8: Fixed mege conflict, Addressed review comments from Ander
- Remove the desciption/comment about scrambling fom the caller, move
it to the function
- Move the IS_GLK check into scrambling function
- Fix alignment
V9: Fixed review comments from Ville, Ander
- Pass the scrambling state variables as bool input to the sink_scrambling
function and let the disable call be unconditional.
- Fix alignments in function calls and debug messages.
- Add kernel doc for function intel_hdmi_handle_sink_scrambling
V10: Rebase
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-6-git-send-email-shashank.sharma@intel.com
Since:
cd9c57cad3 ("x86/MCE: Dump MCE to dmesg if no consumers")
all MCEs are printed even when mcelog is running. Fix the regression to
not print to dmesg when mcelog is running as it is a consumer too.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
[ Massage commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: stable@vger.kernel.org # 4.10..
Fixes: cd9c57cad3 ("x86/MCE: Dump MCE to dmesg if no consumers")
Link: http://lkml.kernel.org/r/20170327093304.10683-2-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While reviewing the -stable patch for commit 86ef58a4e3 "nfit,
libnvdimm: fix interleave set cookie calculation" Ben noted:
"This is returning an int, thus it's effectively doing a 32-bit
comparison and not the 64-bit comparison you say is needed."
Update the compare operation to be immune to this integer demotion problem.
Cc: <stable@vger.kernel.org>
Cc: Nicholas Moulin <nicholas.w.moulin@linux.intel.com>
Fixes: 86ef58a4e3 ("nfit, libnvdimm: fix interleave set cookie calculation")
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Avoid un-intended DCTI Couples. Use of DCTI couples is deprecated.
Also address the "Programming Note" for optimal performance.
Here is the complete text from Oracle SPARC Architecture Specs.
6.3.4.7 DCTI Couples
"A delayed control transfer instruction (DCTI) in the delay slot of
another DCTI is referred to as a “DCTI couple”. The use of DCTI couples
is deprecated in the Oracle SPARC Architecture; no new software should
place a DCTI in the delay slot of another DCTI, because on future Oracle
SPARC Architecture implementations DCTI couples may execute either
slowly or differently than the programmer assumes it will.
SPARC V8 and SPARC V9 Compatibility Note
The SPARC V8 architecture left behavior undefined for a DCTI couple. The
SPARC V9 architecture defined behavior in that case, but as of
UltraSPARC Architecture 2005, use of DCTI couples was deprecated.
Software should not expect high performance from DCTI couples, and
performance of DCTI couples should be expected to decline further in
future processors.
Programming Note
As noted in TABLE 6-5 on page 115, an annulled branch-always
(branch-always with a = 1) instruction is not architecturally a DCTI.
However, since not all implementations make that distinction, for
optimal performance, a DCTI should not be placed in the instruction word
immediately following an annulled branch-always instruction (BA,A or
BPA,A)."
Signed-off-by: Babu Moger <babu.moger@oracle.com>
Reviewed-by: Rob Gardner <rob.gardner@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I encountered this bug when using /proc/kcore to examine the kernel. Plus a
coworker inquired about debugging tools. We computed pa but did
not use it during the maximum physical address bits test. Instead we used
the identity mapped virtual address which will always fail this test.
I believe the defect came in here:
[bpicco@zareason linus.git]$ git describe --contains bb4e6e85da
v3.18-rc1~87^2~4
.
Signed-off-by: Bob Picco <bob.picco@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Our chosen ic_dev may be anywhere in our list of ic_devs, and we may
free it before attempting to close others. When we compare d->dev and
ic_dev->dev, we're potentially dereferencing memory returned to the
allocator. This causes KASAN to scream for each subsequent ic_dev we
check.
As there's a 1-1 mapping between ic_devs and netdevs, we can instead
compare d and ic_dev directly, which implicitly handles the !ic_dev
case, and avoids the use-after-free. The ic_dev pointer may be stale,
but we will not dereference it.
Original splat:
[ 6.487446] ==================================================================
[ 6.494693] BUG: KASAN: use-after-free in ic_close_devs+0xc4/0x154 at addr ffff800367efa708
[ 6.503013] Read of size 8 by task swapper/0/1
[ 6.507452] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 4.11.0-rc3-00002-gda42158 #8
[ 6.514993] Hardware name: AppliedMicro Mustang/Mustang, BIOS 3.05.05-beta_rc Jan 27 2016
[ 6.523138] Call trace:
[ 6.525590] [<ffff200008094778>] dump_backtrace+0x0/0x570
[ 6.530976] [<ffff200008094d08>] show_stack+0x20/0x30
[ 6.536017] [<ffff200008bee928>] dump_stack+0x120/0x188
[ 6.541231] [<ffff20000856d5e4>] kasan_object_err+0x24/0xa0
[ 6.546790] [<ffff20000856d924>] kasan_report_error+0x244/0x738
[ 6.552695] [<ffff20000856dfec>] __asan_report_load8_noabort+0x54/0x80
[ 6.559204] [<ffff20000aae86ac>] ic_close_devs+0xc4/0x154
[ 6.564590] [<ffff20000aaedbac>] ip_auto_config+0x2ed4/0x2f1c
[ 6.570321] [<ffff200008084b04>] do_one_initcall+0xcc/0x370
[ 6.575882] [<ffff20000aa31de8>] kernel_init_freeable+0x5f8/0x6c4
[ 6.581959] [<ffff20000a16df00>] kernel_init+0x18/0x190
[ 6.587171] [<ffff200008084710>] ret_from_fork+0x10/0x40
[ 6.592468] Object at ffff800367efa700, in cache kmalloc-128 size: 128
[ 6.598969] Allocated:
[ 6.601324] PID = 1
[ 6.603427] save_stack_trace_tsk+0x0/0x418
[ 6.607603] save_stack_trace+0x20/0x30
[ 6.611430] kasan_kmalloc+0xd8/0x188
[ 6.615087] ip_auto_config+0x8c4/0x2f1c
[ 6.619002] do_one_initcall+0xcc/0x370
[ 6.622832] kernel_init_freeable+0x5f8/0x6c4
[ 6.627178] kernel_init+0x18/0x190
[ 6.630660] ret_from_fork+0x10/0x40
[ 6.634223] Freed:
[ 6.636233] PID = 1
[ 6.638334] save_stack_trace_tsk+0x0/0x418
[ 6.642510] save_stack_trace+0x20/0x30
[ 6.646337] kasan_slab_free+0x88/0x178
[ 6.650167] kfree+0xb8/0x478
[ 6.653131] ic_close_devs+0x130/0x154
[ 6.656875] ip_auto_config+0x2ed4/0x2f1c
[ 6.660875] do_one_initcall+0xcc/0x370
[ 6.664705] kernel_init_freeable+0x5f8/0x6c4
[ 6.669051] kernel_init+0x18/0x190
[ 6.672534] ret_from_fork+0x10/0x40
[ 6.676098] Memory state around the buggy address:
[ 6.680880] ffff800367efa600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 6.688078] ffff800367efa680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 6.695276] >ffff800367efa700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 6.702469] ^
[ 6.705952] ffff800367efa780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 6.713149] ffff800367efa800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 6.720343] ==================================================================
[ 6.727536] Disabling lock debugging due to kernel taint
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: David S. Miller <davem@davemloft.net>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: James Morris <jmorris@namei.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
There are same conditions for checking whether supporting clkscaling or
not. When ufshcd is supporting clkscaling, active_reqs should be
decreased by one.
[mkp: addressed comment from Bartlomiej]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Andrew has been contributing a lot to PHYLIB over the past months and
his feedback on patches is more than welcome.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
All it does is pick the encoder and call intel_get_shared_dpll(). We
can just do this in the caller. One less indirection level during code
reading.
As another plus, now the two callers of intel_get_shared_dpll() are
{ironlake,haswell}_crtc_compute_clock().
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490209125-20046-2-git-send-email-paulo.r.zanoni@intel.com
We were accidentally only overriding the first VRAM placement. For BOs
with the RADEON_GEM_NO_CPU_ACCESS flag set,
radeon_ttm_placement_from_domain creates a second VRAM placment with
fpfn == 0. If VRAM is almost full, the first VRAM placement with
fpfn > 0 may not work, but the second one with fpfn == 0 always will
(the BO's current location trivially satisfies it). Because "moving"
the BO to its current location puts it back on the LRU list, this
results in an infinite loop.
Fixes: 2a85aedd11 ("drm/radeon: Try evicting from CPU accessible to
inaccessible VRAM first")
Reported-by: Zachary Michaels <zmichaels@oblong.com>
Reported-and-Tested-by: Julien Isorce <jisorce@oblong.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Commit 5b52330bbf ("audit: fix auditd/kernel connection state
tracking") made inlining audit_signal_info() a bit pointless as
it was always calling into auditd_test_task() so let's remove the
inline function in kernel/audit.h and convert __audit_signal_info()
in kernel/auditsc.c into audit_signal_info().
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Intel Apollo Lake platform and the Denverton microserver.
+ small fixlets.
-----BEGIN PGP SIGNATURE-----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=aftN
-----END PGP SIGNATURE-----
Merge tag 'edac_for_4.11_2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC updates from Borislav Petkov:
"A new EDAC driver for the Pondicherry2 memory controller IP found in
the Intel Apollo Lake platform and the Denverton microserver.
Plus small fixlets.
Normally I had this queued for 4.12 but Tony requested for the
pnd2_edac driver to possibly land in 4.11 therefore I'm sending it to
you now.
It is a driver for new hardware which people don't have yet so it
shouldn't cause any regressions.
The couple of patches ontop of it show that Qiuxu actually did test it
on the hardware he has access to :)"
* tag 'edac_for_4.11_2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC, pnd2_edac: Fix reported DIMM number
EDAC, pnd2_edac: Fix !EDAC_DEBUG build
EDAC: Select DEBUG_FS
EDAC, pnd2_edac: Add new EDAC driver for Intel SoC platforms
EDAC, i5000, i5400: Fix use of MTR_DRAM_WIDTH macro
EDAC, xgene: Fix wrongly spelled "procesing"
- Kconfig fixup for the TI IOdelay pinctrl-single add-on.
- Fix up a typo in the meson i2c ao groups.
- Switch a remapping back to use devm_ioremap() as
devm_ioremap_resource() does not allow for sharing memory
regions.
- Do not clear the Qualcomm irq status bit in irq_unmask(),
as this can lead to missing interrupts while the irq handler
is executing.
- Add irq_request/release_resources() on the ST driver.
- Add a bunch of mysteriously missing pingroups for high
numbered pins in the Qualcomm ipq4019 driver.
-----BEGIN PGP SIGNATURE-----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=0sa2
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull more pin control fixes from Linus Walleij:
"Here is a bunch of pin control fixes again
A bit more than I'd like for this subsystem at this point, but what
can I do. They are all driver fixes for hardware issues, as like "we
forgot", "we didn't think of the fact that this could happen", "oops
that one goes there" etc
- Kconfig fixup for the TI IOdelay pinctrl-single add-on
- fix up a typo in the meson i2c ao groups
- switch a remapping back to use devm_ioremap() as
devm_ioremap_resource() does not allow for sharing memory regions
- do not clear the Qualcomm irq status bit in irq_unmask(), as this
can lead to missing interrupts while the irq handler is executing
- add irq_request/release_resources() on the ST driver
- add a bunch of mysteriously missing pingroups for high numbered
pins in the Qualcomm ipq4019 driver"
* tag 'pinctrl-v4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: ipq4019: add missing pingroups for pins > 70
pinctrl: st: add irq_request/release_resources callbacks
pinctrl: qcom: Don't clear status bit on irq_unmask
pinctrl: samsung: Fix memory mapping code
pinctrl: meson-gxbb: Fix typo in i2c ao groups
pinctrl: ti: The IODelay driver is a DRA7xxx feature so depend on that SoC
This reverts commit 5946fdaee4.
The original commit's assumption that the secondary port is
unconnected turns out to be false.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Markku Pesonen <tourula@gmail.com>
Fixes: 5946fdaee4 ("pata_atiixp: Don't use unconnected secondary port on SB600/SB700")
Cc: Darren Stevens <darren@stevens-zone.net>
The cpufreq core only tries to create symbolic links from CPU
directories in sysfs to policy directories in cpufreq_add_dev(),
either when a given CPU is registered or when the cpufreq driver
is registered, whichever happens first. That is not sufficient,
however, because cpufreq_add_dev() may be called for an offline CPU
whose policy object has not been created yet and, quite obviously,
the symbolic cannot be added in that case.
Fix that by making cpufreq_online() attempt to add symbolic links to
policy objects for the CPUs in the related_cpus mask of every new
policy object created by it.
The cpufreq_driver_lock locking around the for_each_cpu() loop
in cpufreq_online() is dropped, because it is not necessary and the
code is somewhat simpler without it. Moreover, failures to create
a symbolic link will not be regarded as hard errors any more and
the CPUs without those links will not be taken offline automatically,
but that should not be problematic in practice.
Reported-and-tested-by: Prashanth Prakash <pprakash@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 4.9+ <stable@vger.kernel.org> # 4.9+
Now that nfs_rename()'s d_move has moved within the RPC task's rpc_call_done
callback, rehashing new_dentry will actually rehash the old dentry's name
in nfs_rename(). d_move() is going to rehash the new dentry for us anyway,
so doing it again here is unnecessary.
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Fixes: 920b4530fb ("NFS: nfs_rename() handle -ERESTARTSYS dentry left behind")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit 3251885285 ("ARM: OMAP4+: Reset CPU1 properly for kexec") started
unconditionally resetting CPU1 because of a kexec boot issue I was seeing
earlier on omap4 when doing kexec boot between two different kernel
versions.
This caused issues on some systems. We should only reset CPU1 as a last
resort option, and try to avoid it where possible. Doing an unconditional
CPU1 reset causes issues for example when booting a bootloader configured
secure OS running on CPU1 as reported by Andrew F. Davis <afd@ti.com>.
We can't completely remove the reset of CPU1 as it would break kexec
booting from older kernels. But we can limit the CPU1 reset to cases
where CPU1 is wrongly parked within the memory area used by the booting
kernel. Then later on we can add support for parking CPU1 for kexec out
of the SDRAM back to bootrom.
So let's first fix the regression reported by Andrew by making CPU1 reset
conditional. To do this, we need to:
1. Save configured AUX_CORE_BOOT_1 for later
2. Modify AUX_CORE_BOOT_0 reading code to for HS SoCs to return
the whole register instead of the CPU mask
3. Check if CPU1 is wrongly parked into the booting kernel by the
previous kernel and reset if needed
Fixes: 3251885285 ("ARM: OMAP4+: Reset CPU1 properly for kexec")
Reported-by: Andrew F. Davis <afd@ti.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Tested-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
mmc2 used for wl12xx was missing the keep-power-in suspend
parameter. As a result the board couldn't reach suspend state.
Signed-off-by: Eyal Reizer <eyalr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Yes the help text is unhelpful, but atomic drivers should never use
this. Just grab the lock without context or anything.
Also an aside: Checking ->active like this doesn't protect against
nonblocking commits, this is rather bogus.
Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-8-daniel.vetter@ffwll.ch
Use the incoming value from debugfs/i915_wedged to select which engines
to marked as guilty in order to force us to reset those requests
(required to quickly bypass simulated hangs).
Testcase: igt/gem_exec_capture
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170325134735.30581-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Whilst I like having the assertions clearly visible in the code, they
are quite repetitious! As we find new limits we want to incorporate into
the set of assertions, it make sense to refactor them to a common
routine.
v2: Add a guc holdout.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170327131412.20293-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
If the request->wa_tail is 0 (because it landed exactly on the end of
the ringbuffer), when we reconstruct request->tail following a reset we
fill in an illegal value (-8 or 0x001ffff8). As a result, RING_HEAD is
never able to catch up with RING_TAIL and the GPU spins endlessly. If
the ring contains a couple of breadcrumbs, even our hangcheck is unable
to catch the busy-looping as the ACTHD and seqno continually advance.
v2: Move the wrap into a common intel_ring_wrap().
Fixes: a3aabe86a3 ("drm/i915/execlists: Reinitialise context image after GPU hang")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Link: http://patchwork.freedesktop.org/patch/msgid/20170327130009.4678-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
All the pre-SKL sprite planes compute the x/y/tile offsets in a
similar way. There are a couple of minor differences but the primary
planes have those as well. Thus i9xx_check_plane_surface()
already does what we need, so let's use it.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323192712.30682-7-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
The effective difference between i9xx_update_primary_plane()
and ironlake_update_primary_plane() is only the HSW/BDW
DSPOFFSET special case. So bring that over into
i9xx_update_primary_plane() and eliminate the duplicated code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323192712.30682-6-ville.syrjala@linux.intel.com
Extract the primary plane surfae offset/x/y calculations for
pre-SKL platforms into a common function, and call it during the
atomic check phase to reduce the amount of stuff we have to do
during the commit phase. SKL is already doing this.
v2: Update the comment about the rotation adjustments to
match the code better (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323192712.30682-5-ville.syrjala@linux.intel.com
Computing the plane control register value is branchy so moving it out
from the plane commit hook seems prudent. Let's pre-compute it during
the atomic check phase and store the result in the plane state.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323192712.30682-4-ville.syrjala@linux.intel.com
Share the code to compute the primary plane control register value
between the i9xx and ilk codepaths as the differences are minimal.
Actually there are no differences between g4x and ilk, so the
current split doesn't really make any sense.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323192712.30682-3-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Pull the code to calculate the pre-SKL primary plane control register
value into separate functions. Allows us to pre-compute it in the
future.
v2: Split the pre-ilk vs. ilk+ unification to a separate patch (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170323192712.30682-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
