The request's rq_disk isn't set for passthrough IO commands, so tracing
uses qid 0 for these which incorrectly decodes as an admin command. Use
the request_queue's queuedata instead since that value is always set for
the IO queues, and never set for the admin queue.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
A crash happened due to injecting error test.
When a CQE has incorrect command id due do an error injection, the host
may find a request which is already freed. Dereferencing req->mr->rkey
causes a crash in nvme_rdma_process_nvme_rsp because the mr is already
freed.
Add a check for the mr to fix it.
Signed-off-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
A crash can happened when a connect is rejected. The host establishes
the connection after received ConnectReply, and then continues to send
the fabrics Connect command. If the controller does not receive the
ReadyToUse capsule, host may receive a ConnectReject reply.
Call nvme_rdma_destroy_queue_ib after the host received the
RDMA_CM_EVENT_REJECTED event. Then when the fabrics Connect command
times out, nvme_rdma_timeout calls nvme_rdma_complete_rq to fail the
request. A crash happenes due to use after free in
nvme_rdma_complete_rq.
nvme_rdma_destroy_queue_ib is redundant when handling the
RDMA_CM_EVENT_REJECTED event as nvme_rdma_destroy_queue_ib is already
called in connection failure handler.
Signed-off-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Similar to 7980d2eabd ("ipvs: clear skb->tstamp in forwarding path").
fq qdisc requires tstamp to be cleared in forwarding path.
Fixes: 8203e2d844 ("net: clear skb->tstamp in forwarding paths")
Fixes: fb420d5d91 ("tcp/fq: move back to CLOCK_MONOTONIC")
Fixes: 80b14dee2b ("net: Add a new socket option for a future transmit time.")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If the cb function is already registered, should return the pointer
of the structure hda_jack_callback which contains this cb func, but
instead it returns the NULL.
Now fix it by replacing func_is_already_in_callback_list() with
find_callback_from_list().
Fixes: f4794c6064 ("ALSA: hda - Don't register a cb func if it is registered already")
Reported-and-suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20201022030221.22393-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After mac address change request completes successfully, the new mac
address need to be saved to adapter->mac_addr as well as
netdev->dev_addr. Otherwise, adapter->mac_addr still holds old
data.
Fixes: 62740e9788 ("net/ibmvnic: Update MAC address settings after adapter reset")
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Link: https://lore.kernel.org/r/20201020223919.46106-1-ljp@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recently, CONFIG_MPTCP_IPV6 no longer selects CONFIG_IPV6. As a
consequence, if CONFIG_MPTCP_IPV6=y is added to the kconfig, it will no
longer ensure CONFIG_IPV6=y. If it is not enabled, CONFIG_MPTCP_IPV6
will stay disabled and selftests will fail.
We also need CONFIG_IPV6 to be built-in. For more details, please see
commit 0ed37ac586 ("mptcp: depends on IPV6 but not as a module").
Note that 'make kselftest-merge' will take all 'config' files found in
'tools/testsing/selftests'. Because some of them already set
CONFIG_IPV6=y, MPTCP selftests were still passing. But they will fail if
MPTCP selftests are launched manually after having executed this command
to prepare the kernel config:
./scripts/kconfig/merge_config.sh -m .config \
./tools/testing/selftests/net/mptcp/config
Fixes: 010b430d5d ("mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20201021155549.933731-1-matthieu.baerts@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an UE or memory error exception is encountered the MCE handler
tries to find the pfn using addr_to_pfn() which takes effective
address as an argument, later pfn is used to poison the page where
memory error occurred, recent rework in this area made addr_to_pfn
to run in real mode, which can be fatal as it may try to access
memory outside RMO region.
Have two helper functions to separate things to be done in real mode
and virtual mode without changing any functionality. This also fixes
the following error as the use of addr_to_pfn is now moved to virtual
mode.
Without this change following kernel crash is seen on hitting UE.
[ 485.128036] Oops: Kernel access of bad area, sig: 11 [#1]
[ 485.128040] LE SMP NR_CPUS=2048 NUMA pSeries
[ 485.128047] Modules linked in:
[ 485.128067] CPU: 15 PID: 6536 Comm: insmod Kdump: loaded Tainted: G OE 5.7.0 #22
[ 485.128074] NIP: c00000000009b24c LR: c0000000000398d8 CTR: c000000000cd57c0
[ 485.128078] REGS: c000000003f1f970 TRAP: 0300 Tainted: G OE (5.7.0)
[ 485.128082] MSR: 8000000000001003 <SF,ME,RI,LE> CR: 28008284 XER: 00000001
[ 485.128088] CFAR: c00000000009b190 DAR: c0000001fab00000 DSISR: 40000000 IRQMASK: 1
[ 485.128088] GPR00: 0000000000000001 c000000003f1fbf0 c000000001634300 0000b0fa01000000
[ 485.128088] GPR04: d000000002220000 0000000000000000 00000000fab00000 0000000000000022
[ 485.128088] GPR08: c0000001fab00000 0000000000000000 c0000001fab00000 c000000003f1fc14
[ 485.128088] GPR12: 0000000000000008 c000000003ff5880 d000000002100008 0000000000000000
[ 485.128088] GPR16: 000000000000ff20 000000000000fff1 000000000000fff2 d0000000021a1100
[ 485.128088] GPR20: d000000002200000 c00000015c893c50 c000000000d49b28 c00000015c893c50
[ 485.128088] GPR24: d0000000021a0d08 c0000000014e5da8 d0000000021a0818 000000000000000a
[ 485.128088] GPR28: 0000000000000008 000000000000000a c0000000017e2970 000000000000000a
[ 485.128125] NIP [c00000000009b24c] __find_linux_pte+0x11c/0x310
[ 485.128130] LR [c0000000000398d8] addr_to_pfn+0x138/0x170
[ 485.128133] Call Trace:
[ 485.128135] Instruction dump:
[ 485.128138] 3929ffff 7d4a3378 7c883c36 7d2907b4 794a1564 7d294038 794af082 3900ffff
[ 485.128144] 79291f24 790af00e 78e70020 7d095214 <7c69502a> 2fa30000 419e011c 70690040
[ 485.128152] ---[ end trace d34b27e29ae0e340 ]---
Fixes: 9ca766f989 ("powerpc/64s/pseries: machine check convert to use common event code")
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724063946.21378-1-ganeshgr@linux.ibm.com
GCC 4.9 sometimes fails to build with "m<>" constraint in
inline assembly.
CC lib/iov_iter.o
In file included from ./arch/powerpc/include/asm/cmpxchg.h:6:0,
from ./arch/powerpc/include/asm/atomic.h:11,
from ./include/linux/atomic.h:7,
from ./include/linux/crypto.h:15,
from ./include/crypto/hash.h:11,
from lib/iov_iter.c:2:
lib/iov_iter.c: In function 'iovec_from_user.part.30':
./arch/powerpc/include/asm/uaccess.h:287:2: error: 'asm' operand has impossible constraints
__asm__ __volatile__( \
^
./include/linux/compiler.h:78:42: note: in definition of macro 'unlikely'
# define unlikely(x) __builtin_expect(!!(x), 0)
^
./arch/powerpc/include/asm/uaccess.h:583:34: note: in expansion of macro 'unsafe_op_wrap'
#define unsafe_get_user(x, p, e) unsafe_op_wrap(__get_user_allowed(x, p), e)
^
./arch/powerpc/include/asm/uaccess.h:329:10: note: in expansion of macro '__get_user_asm'
case 4: __get_user_asm(x, (u32 __user *)ptr, retval, "lwz"); break; \
^
./arch/powerpc/include/asm/uaccess.h:363:3: note: in expansion of macro '__get_user_size_allowed'
__get_user_size_allowed(__gu_val, __gu_addr, __gu_size, __gu_err); \
^
./arch/powerpc/include/asm/uaccess.h💯2: note: in expansion of macro '__get_user_nocheck'
__get_user_nocheck((x), (ptr), sizeof(*(ptr)), false)
^
./arch/powerpc/include/asm/uaccess.h:583:49: note: in expansion of macro '__get_user_allowed'
#define unsafe_get_user(x, p, e) unsafe_op_wrap(__get_user_allowed(x, p), e)
^
lib/iov_iter.c:1663:3: note: in expansion of macro 'unsafe_get_user'
unsafe_get_user(len, &uiov[i].iov_len, uaccess_end);
^
make[1]: *** [scripts/Makefile.build:283: lib/iov_iter.o] Error 1
Define a UPD_CONSTR macro that is "<>" by default and
only "" with GCC prior to GCC 5.
Fixes: fcf1f26895 ("powerpc/uaccess: Add pre-update addressing to __put_user_asm_goto()")
Fixes: 2f279eeb68 ("powerpc/uaccess: Add pre-update addressing to __get_user_asm() and __put_user_asm()")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/212d3bc4a52ca71523759517bb9c61f7e477c46a.1603179582.git.christophe.leroy@csgroup.eu
During the stability test, there are some errors:
ext4_lookup:1590: inode #6967: comm fsstress: iget: checksum invalid.
If the inode->i_iblocks too big and doesn't set huge file flag, checksum
will not be recalculated when update the inode information to it's buffer.
If other inode marks the buffer dirty, then the inconsistent inode will
be flushed to disk.
Fix this problem by checking i_blocks in advance.
Cc: stable@kernel.org
Signed-off-by: Luo Meng <luomeng12@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20201020013631.3796673-1-luomeng12@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds fast commit recovery path support for Ext4 file
system. We add several helper functions that are similar in spirit to
e2fsprogs journal recovery path handlers. Example of such functions
include - a simple block allocator, idempotent block bitmap update
function etc. Using these routines and the fast commit log in the fast
commit area, the recovery path (ext4_fc_replay()) performs fast commit
log recovery.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-8-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds main fast commit commit path handlers. The overall
patch can be divided into two inter-related parts:
(A) Metadata updates tracking
This part consists of helper functions to track changes that need
to be committed during a commit operation. These updates are
maintained by Ext4 in different in-memory queues. Following are
the APIs and their short description that are implemented in this
patch:
- ext4_fc_track_link/unlink/creat() - Track unlink. link and creat
operations
- ext4_fc_track_range() - Track changed logical block offsets
inodes
- ext4_fc_track_inode() - Track inodes
- ext4_fc_mark_ineligible() - Mark file system fast commit
ineligible()
- ext4_fc_start_update() / ext4_fc_stop_update() /
ext4_fc_start_ineligible() / ext4_fc_stop_ineligible() These
functions are useful for co-ordinating inode updates with
commits.
(B) Main commit Path
This part consists of functions to convert updates tracked in
in-memory data structures into on-disk commits. Function
ext4_fc_commit() is the main entry point to commit path.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-6-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds fast commit area trackers in the journal_t
structure. These are initialized via the jbd2_fc_init() routine that
this patch adds. This patch also adds ext4/fast_commit.c and
ext4/fast_commit.h files for fast commit code that will be added in
subsequent patches in this series.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-4-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We are running out of mount option bits. Add handling for using
s_mount_opt2. Add ext4 and jbd2 fast commit feature flag and also add
ability to turn off the fast commit feature in Ext4.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201015203802.3597742-3-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Skip disabled sa to correct the cu_info and active_rbs for sienna cichlid.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.9.x
if it's fine-grained clock dpm, remove the average clock value and
reflects the real clock.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fclk value is missing in pp_dpm_fclk. add this to correctly show the current value.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.9.x
Fix the function used for sienna cichlid to get correct PCIE information
by pp_dpm_pcie.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.9.x
0 causes instruction fetch stall at cache line boundary under some
conditions on Navi10. A non-zero prefetch is the preferred default
in any case.
Fixes soft hang in Luxmark.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
"ip addr show" command execute error when we have a physical
network card with a large number of VFs
The return value of if_nlmsg_size() in rtnl_calcit() will exceed
range of u16 data type when any network cards has a larger number of
VFs. rtnl_vfinfo_size() will significant increase needed dump size when
the value of num_vfs is larger.
Eventually we get a wrong value of min_ifinfo_dump_size because of overflow
which decides the memory size needed by netlink dump and netlink_dump()
will return -EMSGSIZE because of not enough memory was allocated.
So fix it by promoting min_dump_alloc data type to u32 to
avoid whole netlink message size overflow and it's also align
with the data type of struct netlink_callback{}.min_dump_alloc
which is assigned by return value of rtnl_calcit()
Signed-off-by: Di Zhu <zhudi21@huawei.com>
Link: https://lore.kernel.org/r/20201021020053.1401-1-zhudi21@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver depends on mmio regmap API but doesn't select the appropriate
Kconfig option. This fixes it.
Fixes: 8c7bd5a454 ("net: ethernet: mtk-star-emac: new driver")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20201020073515.22769-1-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This driver calls ether_setup to set up the network device.
The ether_setup function would add the IFF_TX_SKB_SHARING flag to the
device. This flag indicates that it is safe to transmit shared skbs to
the device.
However, this is not true. This driver may pad the frame (in eth_tx)
before transmission, so the skb may be modified.
Fixes: 550fd08c2c ("net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared")
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20201020063420.187497-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The hdlc_rcv function is used as hdlc_packet_type.func to process any
skb received in the kernel with skb->protocol == htons(ETH_P_HDLC).
The purpose of this function is to provide second-stage processing for
skbs not assigned a "real" L3 skb->protocol value in the first stage.
This function assumes the device from which the skb is received is an
HDLC device (a device created by this module). It assumes that
netdev_priv(dev) returns a pointer to "struct hdlc_device".
However, it is possible that some driver in the kernel (not necessarily
in our control) submits a received skb with skb->protocol ==
htons(ETH_P_HDLC), from a non-HDLC device. In this case, the skb would
still be received by hdlc_rcv. This will cause problems.
hdlc_rcv should be able to recognize and drop invalid skbs. It should
first make sure "dev" is actually an HDLC device, before starting its
processing. This patch adds this check to hdlc_rcv.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20201020013152.89259-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yaniv reported a compilation error after pulling latest libbpf:
[...]
../libbpf/src/root/usr/include/bpf/bpf_helpers.h:99:10: error:
unknown register name 'r0' in asm
: "r0", "r1", "r2", "r3", "r4", "r5");
[...]
The issue got triggered given Yaniv was compiling tracing programs with native
target (e.g. x86) instead of BPF target, hence no BTF generated vmlinux.h nor
CO-RE used, and later llc with -march=bpf was invoked to compile from LLVM IR
to BPF object file. Given that clang was expecting x86 inline asm and not BPF
one the error complained that these regs don't exist on the former.
Guard bpf_tail_call_static() with defined(__bpf__) where BPF inline asm is valid
to use. BPF tracing programs on more modern kernels use BPF target anyway and
thus the bpf_tail_call_static() function will be available for them. BPF inline
asm is supported since clang 7 (clang <= 6 otherwise throws same above error),
and __bpf_unreachable() since clang 8, therefore include the latter condition
in order to prevent compilation errors for older clang versions. Given even an
old Ubuntu 18.04 LTS has official LLVM packages all the way up to llvm-10, I did
not bother to special case the __bpf_unreachable() inside bpf_tail_call_static()
further.
Also, undo the sockex3_kern's use of bpf_tail_call_static() sample given they
still have the old hacky way to even compile networking progs with native instead
of BPF target so bpf_tail_call_static() won't be defined there anymore.
Fixes: 0e9f6841f6 ("bpf, libbpf: Add bpf_tail_call_static helper for bpf programs")
Reported-by: Yaniv Agman <yanivagman@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Tested-by: Yaniv Agman <yanivagman@gmail.com>
Link: https://lore.kernel.org/bpf/CAMy7=ZUk08w5Gc2Z-EKi4JFtuUCaZYmE4yzhJjrExXpYKR4L8w@mail.gmail.com
Link: https://lore.kernel.org/bpf/20201021203257.26223-1-daniel@iogearbox.net
In commit 269e583357 ("powerpc/eeh: Delete eeh_pe->config_addr") the
following simplification was made:
- if (!pe->addr && !pe->config_addr) {
+ if (!pe->addr) {
eeh_stats.no_cfg_addr++;
return 0;
}
This introduced a bug which causes EEH checking to be skipped for
devices in PE#0.
Before the change above the check would always pass since at least one
of the two PE addresses would be non-zero in all circumstances. On
PowerNV pe->config_addr would be the BDFN of the first device added to
the PE. The zero BDFN is reserved for the PHB's root port, but this is
fine since for obscure platform reasons the root port is never
assigned to PE#0.
Similarly, on pseries pe->addr has always been non-zero for the
reasons outlined in commit 42de19d5ef ("powerpc/pseries/eeh: Allow
zero to be a valid PE configuration address").
We can fix the problem by deleting the block entirely The original
purpose of this test was to avoid performing EEH checks on devices
that were not on an EEH capable bus. In modern Linux the edev->pe
pointer will be NULL for devices that are not on an EEH capable bus.
The code block immediately above this one already checks for the
edev->pe == NULL case so this test (new and old) is entirely
redundant.
Ideally we'd delete eeh_stats.no_cfg_addr too since nothing increments
it any more. Unfortunately, that information is exposed via
/proc/powerpc/eeh which means it's technically ABI. We could make it
hard-coded, but that's a change for another patch.
Fixes: 269e583357 ("powerpc/eeh: Delete eeh_pe->config_addr")
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201021232554.1434687-1-oohall@gmail.com
This updates the test_tc_neigh prog in selftests to use the new syntax of
bpf_redirect_neigh(). To exercise the helper both with and without the
optional parameter, add an additional test_tc_neigh_fib test program, which
does a bpf_fib_lookup() followed by a call to bpf_redirect_neigh() instead
of looking up the ifindex in a map.
Update the test_tc_redirect.sh script to run both versions of the test,
and while we're add it, fix it to work on systems that have a consolidated
dual-stack 'ping' binary instead of separate ping/ping6 versions.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/160322915724.32199.17530068594636950447.stgit@toke.dk
In exfat_move_file(), the identity of source and target directory has been
checked by the caller.
Also, it gets stream.start_clu from file dir-entry, which is an invalid
determination.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Remove 'rwoffset' in exfat_inode_info and replace it with the parameter of
exfat_readdir().
Since rwoffset is referenced only by exfat_readdir(), it is not necessary
a exfat_inode_info's member.
Also, change cpos to point to the next of entry-set, and return the index
of dir-entry via dir_entry->entry.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
There is nothing in directory just created, so there is no need to scan.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
The exfat_find_dir_entry() called by exfat_find() doesn't return -EEXIST.
Therefore, the root-dir information setting is never executed.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
We alreday has the interface i_blocksize() to get blocksize,
so use it.
Signed-off-by: Xianting Tian <tian.xianting@h3c.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Based on the discussion in [0], update the bpf_redirect_neigh() helper to
accept an optional parameter specifying the nexthop information. This makes
it possible to combine bpf_fib_lookup() and bpf_redirect_neigh() without
incurring a duplicate FIB lookup - since the FIB lookup helper will return
the nexthop information even if no neighbour is present, this can simply
be passed on to bpf_redirect_neigh() if bpf_fib_lookup() returns
BPF_FIB_LKUP_RET_NO_NEIGH. Thus fix & extend it before helper API is frozen.
[0] https://lore.kernel.org/bpf/393e17fc-d187-3a8d-2f0d-a627c7c63fca@iogearbox.net/
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/bpf/160322915615.32199.1187570224032024535.stgit@toke.dk
If processing recovered log intent items fails, we need to cancel all
the unprocessed recovered items immediately so that a subsequent AIL
push in the bail out path won't get wedged on the pinned intent items
that didn't get processed.
This can happen if the log contains (1) an intent that gets and releases
an inode, (2) an intent that cannot be recovered successfully, and (3)
some third intent item. When recovery of (2) fails, we leave (3) pinned
in memory. Inode reclamation is called in the error-out path of
xfs_mountfs before xfs_log_cancel_mount. Reclamation calls
xfs_ail_push_all_sync, which gets stuck waiting for (3).
Therefore, call xlog_recover_cancel_intents if _process_intents fails.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
To servers which do not support directory leases (e.g. Samba)
it is wasteful to try to open_shroot (ie attempt to cache the
root directory handle). Skip attempt to open_shroot when
server does not indicate support for directory leases.
Cuts the number of requests on mount from 17 to 15, and
cuts the number of requests on stat of the root directory
from 4 to 3.
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org> # v5.1+
When mounting with modefromsid mount option, it was possible to
get the error on stat of a fifo or char or block device:
"cannot stat <filename>: Operation not supported"
Special devices can be stored as reparse points by some servers
(e.g. Windows NFS server and when using the SMB3.1.1 POSIX
Extensions) but when the modefromsid mount option is used
the client attempts to get the ACL for the file which requires
opening with OPEN_REPARSE_POINT create option.
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Can be helpful in debugging mount and reconnect issues
Signed-off-by: Samuel Cabrero <scabrero@suse.de>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
TCP server info field server->total_read is modified in parallel by
demultiplex thread and decrypt offload worker thread. server->total_read
is used in calculation to discard the remaining data of PDU which is
not read into memory.
Because of parallel modification, server->total_read can get corrupted
and can result in discarding the valid data of next PDU.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org> #5.4+
Signed-off-by: Steve French <stfrench@microsoft.com>
Clear linked_timeout for next requests in __io_queue_sqe() so we won't
queue it up unnecessary when it's going to be punted.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Cc: stable@vger.kernel.org # v5.9
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In order to avoid creating executable hugepages in the TDP MMU PF
handler, remove the dependency between disallowed_hugepage_adjust and
the shadow_walk_iterator. This will open the function up to being used
by the TDP MMU PF handler in a future patch.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-10-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add functions to zap SPTEs to the TDP MMU. These are needed to tear down
TDP MMU roots properly and implement other MMU functions which require
tearing down mappings. Future patches will add functions to populate the
page tables, but as for this patch there will not be any work for these
functions to do.
Tested by running kvm-unit-tests and KVM selftests on an Intel Haswell
machine. This series introduced no new failures.
This series can be viewed in Gerrit at:
https://linux-review.googlesource.com/c/virt/kvm/kvm/+/2538
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20201014182700.2888246-8-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cache the address space ID just like the slot ID. It will be used in
order to fill in the dirty ring entries.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201014182700.2888246-7-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
