[Why]
A seamless transition between modes can be performed if the new incoming
mode has the same timing parameters as the optimized mode on a display with a
variable vtotal min/max.
Smooth video playback usecases can be enabled with this seamless transition by
switching to a new mode which has a refresh rate matching the video.
[How]
Skip full modeset if userspace requested a compatible freesync mode which only
differs in the front porch timing from the current mode.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
While possible for userspace to create and add custom mode based off the
optimized mode for the connected display which differs only in front porch
timing, this patch set adds a list of common video modes in advance.
The list of common video refresh rates is small, well known and the optimized
mode has specific requirements to be able to enable HW frame doubling and
tripling so it makes most sense to create the modes that video players will need
in advance. The optimized mode matches the preferred mode resolution but has the
highest refresh rate available to enable the largest front porch extension.
[How]
Find the optimized mode and store it on the connector so we can check it
later during our optimized modeset.
Prepopulate the mode list with a list of common video mades based on the
optimized mode (but with a longer front porch) if the panel doesn't support a
variant of the mode natively.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This option shall be opt-in by default since it is a temporary solution
until long term solution is agreed upon which may require userspace interface
changes. This feature give the user a seamless experience when freesync aware
programs (media players for instance) switches to a compatible freesync mode
when playing videos. Enabling this feature also have the potential side effect
of causing higher power consumption due to running a mode with lower resolution
and base clock frequency with the highest base clock supported on the monitor as
per its advertised modes. There has been precedent of manufacturing modes in the
kernel. In AMDGPU, the existing usage are for common modes and scaling modes.
Other driver have a similar approach as well.
[How]
Adds a module parameter to enable freesync video mode modeset
optimization. Enabling this mode allows the driver to skip a full modeset when a
freesync compatible mode is requested by the userspace. This parameter will also
add some additional modes that are within the connected monitor's VRR range
corresponding to common video modes, which media players can use for a seamless
experience while making use of freesync.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently callers have to provide handle of amdgpu_device,
which is not used by the implementation. It is unlikely this
parameter will become useful in future, thus removing it
v2: squash in unused variable fix
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move gpu_reset_counter after drm_sched_stop to avoid race
condition caused by job submitted between reset_count +1 and
drm_sched_stop.
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v3: updated to include new clocks od_vddgfx_offset, od_cclk
Context mismatch with revision v3 to patch 0003
Modified Functions
smu_sys_set_pp_table() - modifed signature to match Powerplay API set_pp_table
smu_force_performance_level() - modifed arg0 to match Powerplay API force_performance_level
smu_od_edit_dpm_table() - modifed arg0 to match Powerplay API odn_edit_dpm_table
Other Changes
smu_od_edit_dpm_table() - removed call to task(READJUST_POWER_STATE) after COMMIT_TABLE,
now handled in calling function
amdgpu_set_power_dpm_force_performance_level() - now checks thermal for swsmu systems before trying to change level
amdgpu_set_pp_od_clk_voltage() - now attempts to set fine_grain_clock_vol before swsmu edit dpm table
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: fix errors and warnings flagged by checkpatch
v3: Context mismatch with revision v3 to patch 0003
New Functions
smu_get_mclk - implementation of the Powerplay API function get_mclk
smu_get_sclk - implementation of the Powerplay API function get_sclk
smu_handle_dpm_task - implementation of the Powerplay API function dispatch_tasks
Modified Functions
smu_dpm_set_power_gate - - modifed arg0 to match Powerplay API set_powergating_by_smu
Other Changes
removed special smu handling in dpm functions and called through Powerplay API
call to smu_dpm_set_power_gate via Powerplay API now locks mutex for UVD and VCE
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v3: updated to include new clocks vclk, dclk, od_vddgfx_offset, od_cclk
Added forward declaration for function smu_force_smuclk_levels to resolve clash with other commits
Resolved context clashes with other commits and v3 updates to patches 0003, 0004
v2: fix errors flagged by checkpatch
New Functions
smu_bump_power_profile_mode() - changes profile mode assuming calling function already has mutex
smu_force_ppclk_levels() - accepts Powerplay enum pp_clock_type to specify clock to change
smu_print_ppclk_levels() - accepts Powerplay enum pp_clock_type to request clock levels
amdgpu_get_pp_dpm_clock() - accepts Powerplay enum pp_clock_type to request clock levels and allows
all the amdgpu_get_pp_dpm_$CLK functions to have a single codepath
amdgpu_set_pp_dpm_clock() - accepts Powerplay enum pp_clock_type to set clock levels and allows
all the amdgpu_set_pp_dpm_$CLK functions to have a single codepath
Modified Functions
smu_force_smuclk_levels - changed function name to make clear difference to smu_force_ppclk_levels
smu_force_ppclk_levels() - modifed signature to implement Powerplay API force_clock_level
- calls smu_force_smuclk_levels
smu_print_smuclk_levels - changed function name to make clear difference to smu_print_ppclk_levels
smu_print_ppclk_levels() - modifed signature to implement Powerplay API force_clock_level
- calls smu_print_smuclk_levels
smu_sys_get_gpu_metrics - modifed arg0 to match Powerplay API get_gpu_metrics
smu_get_power_profile_mode - modifed arg0 to match Powerplay API get_power_profile_mode
smu_set_power_profile_mode - modifed arg0 to match Powerplay API set_power_profile_mode
- removed arg lock_needed, mutex always locked, internal functions
can call smu_bump if they already hold lock
smu_switch_power_profile - now calls smu_bump as already holds mutex lock
smu_adjust_power_state_dynamic - now calls smu_bump as already holds mutex lock
amdgpu_get_pp_od_clk_voltage - uses smu_print_ppclk_levels
amdgpu_{set,get}_pp_dpm_$CLK - replace logic with call helper function amdgpu_{set,get}_pp_dpm_clock()
CLK ={sclk, mclk, socclk, fclk, dcefclk, pci, vclkd, dclk}
Other Changes
added 5 smu Powerplay functions to swsmu_dpm_funcs
removed special smu handling in pm functions and called through Powerplay API
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: add comment to highlight assignment that changes uint32_t value to int
fix errors flagged by checkpatch.pl
New Functions
smu_get_baco_capability() - Implement Powerplay API get_asic_baco_capability
smu_baco_set_state() - Implement Powerplay API set_asic_baco_state
Modified Functions
smu_read_sensor() - modifed signature to match Powerplay API read_sensor
Other Changes
added 3 above smu Powerplay functions to swsmu_dpm_funcs
removed special smu handling in 5 dpm functions and called through Powerplay API
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: remove check for error during swsmu amdgpu_dpm_get_pp_num_states() call to match previous powerplay behaviour
v3: removed smu implementation of powerplay get_power_limit
Resolved context clashes with other commits
Modified Files
smu_set_power_limit() - modifed arg0 to match Powerplay API set_power_limit
smu_sys_get_pp_table() - modifed signature to match Powerplay API get_pp_table
smu_get_power_num_states() - modifed arg0 to match Powerplay API get_pp_num_states
smu_get_current_power_state() - modifed arg0 to match Powerplay API get_current_power_state
smu_sys_get_pp_feature_mask() - modifed signature to match Powerplay API get_ppfeature_status
smu_sys_set_pp_feature_mask() - modifed arg0 to match Powerplay API set_ppfeature_status
Other Changes
added 6 above smu Powerplay functions to swsmu_dpm_funcs
removed special smu handling of above functions and called through Powerplay API
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: changed error return value of smu_get_fan_control_mode to AMD_FAN_CTRL_NONE
fixed type in amdgpu_hwmon_get_pwm1_enable() print statement
fixed indent flagged by checkpatch.pl
Modified Functions
smu_set_fan_speed_rpm() - modifed arg0 to match Powerplay API set_fan_speed_rpm
smu_get_fan_control_mode() - modifed signature to match Powerplay API get_fan_control_mode
smu_set_fan_control_mode() - modifed signature to match Powerplay API set_fan_control_mode
smu_get_fan_speed_percent() - modifed signature to match Powerplay API get_fan_speed_percent
smu_set_fan_speed_percent() - modifed signature to match Powerplay API set_fan_speed_percent
smu_get_fan_speed_rpm() - modifed arg0 to match Powerplay API get_fan_speed_rpm
Other Changes
added 6 above smu fan Powerplay functions to swsmu_dpm_funcs
removed special smu handling of above functions and called through Powerplay API
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Modified Functions
smu_set_xgmi_pstate() - modifed arg0 to match Powerplay API set_xgmi_pstate
smu_mode2_reset() - modifed arg0 to match Powerplay API asic_reset_mode_2
smu_switch_power_profile() - modifed arg0 to match Powerplay API switch_power_profile
smu_set_mp1_state() - modifed arg0 to match Powerplay API set_mp1_state
smu_set_df_cstate() - modifed arg0 to match Powerplay API set_df_cstate
smu_enable_mgpu_fan_boost() - modifed arg0 to match Powerplay API enable_mgpu_fan_boost
Other Changes
added above smu reset Powerplay functions to swsmu_dpm_funcs
removed special smu handling of above functions and called through Powerplay API
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: updated the structure name to swsmu_pm_funcs
Modified Functions
smu_get_performance_level() - modifed arg0 to match Powerplay API get_performance_level
Other Changes
added a new structure swsmu_dpm_funcs to hold smu functions for Powerplay API
removed special smu handling from amdgpu_get_power_dpm_force_performance_level
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The value of max_me in amdgpu_gfx_rlc_setup_cp_table should reduce to 4
when mec2_fw is removed on asic renoir/arcturus. Or it will cause kernel
NULL pointer when modprobe driver.
Signed-off-by: Changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Navi12 0x7360/C7 SKU has no video support, so remove it.
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Asher.Song <Asher.Song@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To ensure user has a constant of VRAM accessible in run-time, driver
reserves limit backup pages when init, and return ones when bad pages
retired, to keep no change of unused memory size.
v2: refine codes to calculate badpags threshold
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following coccicheck warnings:
./drivers/gpu/drm/amd/amdgpu/athub_v2_1.c:79:40-45: WARNING: conversion
to bool not needed here.
./drivers/gpu/drm/amd/amdgpu/athub_v2_1.c:81:40-45: WARNING: conversion
to bool not needed here.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
>> drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9804:38:
>> warning: variable 'i' is uninitialized when used here
>> [-Wuninitialized]
timing = &edid->detailed_timings[i];
^
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9714:7:
note: initialize the variable 'i' to silence this warning
int i;
^
= 0
1 warning generated.
Initialize the variable 'i'.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Because of dpg, the rptr/wptr need to be saved on fw shared memory,
and restore them back in RBC_RB_RPTR/WPTR in kernel at power up.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch enables ASSR if display declares such support in DPCD.
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
disable mec2 fw bin loading and reference on unsupported ASIC
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove executable configuration for the file.
Reported-by: Ming Wang <wangming01@loongson.cn>
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the shutdown and poweroff opt on the s0i3 system we still need
un-gate the gfx clock gating and power gating before destory amdgpu device.
Fixes: 628c36d7b2 ("drm/amdgpu: update amdgpu device suspend/resume sequence for s0i3 support")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1499
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following coccicheck warnings:
./drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c:1621:40-45: WARNING: conversion
to bool not needed here.
./drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c:1619:40-45: WARNING: conversion
to bool not needed here.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following coccicheck warnings:
./drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c:544:34-39: WARNING:
conversion to bool not needed here.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following coccicheck warnings:
./drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c:900:47-52: WARNING:
conversion to bool not needed here.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clang warns:
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu_cmn.c:764:2: warning:
variable 'structure_size' is used uninitialized whenever switch default
is taken [-Wsometimes-uninitialized]
default:
^~~~~~~
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu_cmn.c:770:23: note:
uninitialized use occurs here
memset(header, 0xFF, structure_size);
^~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu_cmn.c:753:25: note:
initialize the variable 'structure_size' to silence this warning
uint16_t structure_size;
^
= 0
1 warning generated.
Return in the default case, as the size of the header will not be known.
Fixes: de4b7cd8cb ("drm/amd/pm/swsmu: unify the init soft gpu metrics function")
Link: https://github.com/ClangBuiltLinux/linux/issues/1304
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Spatial dithering to 10 bpc depth was disabled for all DCE's.
Testing on DCE-8.3 and DCE-11.2 did not show any obvious ill
effects, but a measureable precision improvement (via colorimeter)
when displaying a fp16 framebuffer to a 10 bpc DP or HDMI connected
HDR-10 monitor.
v2: enable it for all DCEs (Alex)
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com> (v2)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
mutex_lock() was introduced in dm_disable_vblank(), which could
be called in an IRQ context. Waiting in IRQ would cause issues
like kernel lockup, etc.
[How]
Handle code that requires mutex lock on a different thread.
v2: squash in compilation fix without CONFIG_DRM_AMD_DC_DCN (Alex)
v3: squash in warning fix (Wei)
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
No reason to have uninitialized var at top of function
[How]
Move it to minimum scope where it's actuallty used
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There is a window of time where we optimize bandwidth due to no streams
enabled will enable PSTATE changing but HUBPs are not disabled yet.
This results in underflow counter increasing in some hotplug scenarios.
[How]
Set the optimize-bandwidth flag for later processing once all the HUBPs
are properly disabled.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Vendor based fan noise improvement
[how]
Report timing synchronizable when DP streams time frame
difference is less than 0.05 percent. Adjust DP DTOs and
sync displays using MASTER_UPDATE_LOCK_DB_X_Y
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
This check for ASIC revision is no longer useful and causes
lightup issues after a topology change in MST DSC scenario.
In this case, DSC configs should be recalculated for the new
topology. This check prevented that from happening on certain
ASICs that do, in fact, support DSC.
[how]
Change the ASIC revision to instead check if DSC is supported.
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some external displays with DP can use seamless boot, but their audio endpoints are
only enabled after hotplug.
On boot, these displays inherit UEFI timings without properly initializing audio.
[How]
Enable display audio when seamless booting with an external monitor over DP.
Signed-off-by: Anthony Wang <anthony1.wang@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Seamless boot over DP MST is not POR, but is not explicitly disabled.
[How]
Add check for DP MST and return false in
dc_validate_seamless_boot_timing.
Signed-off-by: Anthony Wang <anthony1.wang@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Debugfs entries being moved from DP/eDP only to be available
on all connectors are cluttering the code.
[How]
Refactor the registration of these debugfs entries.
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In some cases, this function is called when DIG BE is not
connected to DIG FE, in which case a value of zero isn't
invalid and assert should not be hit.
[How]
Remove assert and handle ENGINE_ID_UNKNOWN result in calling
function.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When run igt@kms_vrr in a device that uses DCN2.1 architecture, we
noticed multiple failures. Furthermore, when we tested a VRR demo, we
noticed a system hang where the mouse pointer still works, but the
entire system freezes; in this case, we don't see any dmesg warning or
failure messages kernel. This happens due to a lack of vupdate_no_lock
interrupt, making the userspace wait eternally to get the event back.
For fixing this issue, we need to add the vupdate_no_lock interrupt in
the interrupt list.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Bindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: 62914a99de ("drm/amdgpu: Use mmu_interval_insert instead of hmm_mirror")
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If init_cwsr_apu fails, we currently leave the kfd_process structure in
place anyway. The next kfd_open will then succeed, using the existing
kfd_process structure. Fix that by cleaning up the kfd_process after a
failure in init_cwsr_apu.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We use mmu_notifier_put to free the MMU notifier. That needs to be
paired with mmu_notifier_get to work correctly. Othewrise the next patch
would cause a kernel oops.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following coccicheck warning:
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:8142:16-21: WARNING:
conversion to bool not needed here
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We should commit the value after restore them back to default as well.
$ echo "r" > pp_od_clk_voltage
$ echo "c" > pp_od_clk_voltage
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New proposed sequence for HUBP blanking causes regressions where the
hardware would fail to enter blank which triggers an assert in the new
sequence. This change brings back the old sequence.
Fixes: 985faf2c4e ("drm/amd/display: New sequence for HUBP blank")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mark amdgpu_ras_debugfs_create_ctrl_node() as static.
Fixes: eb14235668777b ("drm/amdgpu: do not keep debugfs dentry")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC version 3.2.123 brings improvements in multiple areas.
In summary, we highlight:
- Firmware release 0.0.52
- Bug fixes on MPC OGAM sequence, display experience, etc.
- Improvements on timing, transmitter control, etc.
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
