Waiman managed to trigger a PMI while in a emulate_vsyscall() fault,
the PMI in turn managed to trigger a fault while obtaining a stack
trace. This triggered the sig_on_uaccess_error recursive fault logic
and killed the process dead.
Fix this by explicitly excluding interrupts from the recursive fault
logic.
Reported-and-Tested-by: Waiman Long <waiman.long@hp.com>
Fixes: e00b12e64b ("perf/x86: Further optimize copy_from_user_nmi()")
Cc: Aswin Chandramouleeswaran <aswin@hp.com>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140110200603.GJ7572@laptop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On SoCs that have the calibration MSRs available, either there is no
PIT, HPET or PMTIMER to calibrate against, or the PIT/HPET/PMTIMER is
driven from the same clock as the TSC, so calibration is redundant and
just slows down the boot.
TSC rate is caculated by this formula:
<maximum core-clock to bus-clock ratio> * <maximum resolved frequency>
The ratio and the resolved frequency ID can be obtained from MSR.
See Intel 64 and IA-32 System Programming Guid section 16.12 and 30.11.5
for details.
Signed-off-by: Bin Gao <bin.gao@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-rgm7xmg7k6qnjlw3ynkcjsmh@git.kernel.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64791
When a cpu is downed on a system, the irqs on the cpu are assigned to
other cpus. It is possible, however, that when a cpu is downed there
aren't enough free vectors on the remaining cpus to account for the
vectors from the cpu that is being downed.
This results in an interesting "overflow" condition where irqs are
"assigned" to a CPU but are not handled.
For example, when downing cpus on a 1-64 logical processor system:
<snip>
[ 232.021745] smpboot: CPU 61 is now offline
[ 238.480275] smpboot: CPU 62 is now offline
[ 245.991080] ------------[ cut here ]------------
[ 245.996270] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:264 dev_watchdog+0x246/0x250()
[ 246.005688] NETDEV WATCHDOG: p786p1 (ixgbe): transmit queue 0 timed out
[ 246.013070] Modules linked in: lockd sunrpc iTCO_wdt iTCO_vendor_support sb_edac ixgbe microcode e1000e pcspkr joydev edac_core lpc_ich ioatdma ptp mdio mfd_core i2c_i801 dca pps_core i2c_core wmi acpi_cpufreq isci libsas scsi_transport_sas
[ 246.037633] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.12.0+ #14
[ 246.044451] Hardware name: Intel Corporation S4600LH ........../SVRBD-ROW_T, BIOS SE5C600.86B.01.08.0003.022620131521 02/26/2013
[ 246.057371] 0000000000000009 ffff88081fa03d40 ffffffff8164fbf6 ffff88081fa0ee48
[ 246.065728] ffff88081fa03d90 ffff88081fa03d80 ffffffff81054ecc ffff88081fa13040
[ 246.074073] 0000000000000000 ffff88200cce0000 0000000000000040 0000000000000000
[ 246.082430] Call Trace:
[ 246.085174] <IRQ> [<ffffffff8164fbf6>] dump_stack+0x46/0x58
[ 246.091633] [<ffffffff81054ecc>] warn_slowpath_common+0x8c/0xc0
[ 246.098352] [<ffffffff81054fb6>] warn_slowpath_fmt+0x46/0x50
[ 246.104786] [<ffffffff815710d6>] dev_watchdog+0x246/0x250
[ 246.110923] [<ffffffff81570e90>] ? dev_deactivate_queue.constprop.31+0x80/0x80
[ 246.119097] [<ffffffff8106092a>] call_timer_fn+0x3a/0x110
[ 246.125224] [<ffffffff8106280f>] ? update_process_times+0x6f/0x80
[ 246.132137] [<ffffffff81570e90>] ? dev_deactivate_queue.constprop.31+0x80/0x80
[ 246.140308] [<ffffffff81061db0>] run_timer_softirq+0x1f0/0x2a0
[ 246.146933] [<ffffffff81059a80>] __do_softirq+0xe0/0x220
[ 246.152976] [<ffffffff8165fedc>] call_softirq+0x1c/0x30
[ 246.158920] [<ffffffff810045f5>] do_softirq+0x55/0x90
[ 246.164670] [<ffffffff81059d35>] irq_exit+0xa5/0xb0
[ 246.170227] [<ffffffff8166062a>] smp_apic_timer_interrupt+0x4a/0x60
[ 246.177324] [<ffffffff8165f40a>] apic_timer_interrupt+0x6a/0x70
[ 246.184041] <EOI> [<ffffffff81505a1b>] ? cpuidle_enter_state+0x5b/0xe0
[ 246.191559] [<ffffffff81505a17>] ? cpuidle_enter_state+0x57/0xe0
[ 246.198374] [<ffffffff81505b5d>] cpuidle_idle_call+0xbd/0x200
[ 246.204900] [<ffffffff8100b7ae>] arch_cpu_idle+0xe/0x30
[ 246.210846] [<ffffffff810a47b0>] cpu_startup_entry+0xd0/0x250
[ 246.217371] [<ffffffff81646b47>] rest_init+0x77/0x80
[ 246.223028] [<ffffffff81d09e8e>] start_kernel+0x3ee/0x3fb
[ 246.229165] [<ffffffff81d0989f>] ? repair_env_string+0x5e/0x5e
[ 246.235787] [<ffffffff81d095a5>] x86_64_start_reservations+0x2a/0x2c
[ 246.242990] [<ffffffff81d0969f>] x86_64_start_kernel+0xf8/0xfc
[ 246.249610] ---[ end trace fb74fdef54d79039 ]---
[ 246.254807] ixgbe 0000:c2:00.0 p786p1: initiating reset due to tx timeout
[ 246.262489] ixgbe 0000:c2:00.0 p786p1: Reset adapter
Last login: Mon Nov 11 08:35:14 from 10.18.17.119
[root@(none) ~]# [ 246.792676] ixgbe 0000:c2:00.0 p786p1: detected SFP+: 5
[ 249.231598] ixgbe 0000:c2:00.0 p786p1: NIC Link is Up 10 Gbps, Flow Control: RX/TX
[ 246.792676] ixgbe 0000:c2:00.0 p786p1: detected SFP+: 5
[ 249.231598] ixgbe 0000:c2:00.0 p786p1: NIC Link is Up 10 Gbps, Flow Control: RX/TX
(last lines keep repeating. ixgbe driver is dead until module reload.)
If the downed cpu has more vectors than are free on the remaining cpus on the
system, it is possible that some vectors are "orphaned" even though they are
assigned to a cpu. In this case, since the ixgbe driver had a watchdog, the
watchdog fired and notified that something was wrong.
This patch adds a function, check_vectors(), to compare the number of vectors
on the CPU going down and compares it to the number of vectors available on
the system. If there aren't enough vectors for the CPU to go down, an
error is returned and propogated back to userspace.
v2: Do not need to look at percpu irqs
v3: Need to check affinity to prevent counting of MSIs in IOAPIC Lowest
Priority Mode
v4: Additional changes suggested by Gong Chen.
v5/v6/v7/v8: Updated comment text
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Link: http://lkml.kernel.org/r/1389613861-3853-1-git-send-email-prarit@redhat.com
Reviewed-by: Gong Chen <gong.chen@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Yang Zhang <yang.z.zhang@Intel.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Janet Morgan <janet.morgan@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Ruiv Wang <ruiv.wang@gmail.com>
Cc: Gong Chen <gong.chen@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org>
Pull locking fixes from Ingo Molnar:
"Two fixes from lockdep coverage of seqlocks, which fix deadlocks on
lockdep-enabled ARM systems"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched_clock: Disable seqlock lockdep usage in sched_clock()
seqlock: Use raw_ prefix instead of _no_lockdep
At first Jakub Zawadzki noticed that some divisions by reciprocal_divide
were not correct. (off by one in some cases)
http://www.wireshark.org/~darkjames/reciprocal-buggy.c
He could also show this with BPF:
http://www.wireshark.org/~darkjames/set-and-dump-filter-k-bug.c
The reciprocal divide in linux kernel is not generic enough,
lets remove its use in BPF, as it is not worth the pain with
current cpus.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jakub Zawadzki <darkjames-ws@darkjames.pl>
Cc: Mircea Gherzan <mgherzan@gmail.com>
Cc: Daniel Borkmann <dxchgb@gmail.com>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Matt Evans <matt@ozlabs.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
We want to support all Intel MID (Mobile Internet Device) platforms
with a single config selection. This patch removes deprecated
CONFIG_X86_MDFLD and X86_WANT_INTEL_MID options in favor of having
CONFIG_X86_INTEL_MID only.
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Link: http://lkml.kernel.org/r/1387244246-20714-1-git-send-email-david.a.cohen@linux.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
This code was partially based on Mark Brown's previous work.
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Link: http://lkml.kernel.org/r/1387224459-25746-4-git-send-email-david.a.cohen@linux.intel.com
Signed-off-by: Fei Yang <fei.yang@intel.com>
Cc: Mark F. Brown <mark.f.brown@intel.com>
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
This patch adds Clovertrail support on intel-mid and makes it more
flexible to support other SoCs.
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Link: http://lkml.kernel.org/r/1387224459-25746-3-git-send-email-david.a.cohen@linux.intel.com
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Fei Yang <fei.yang@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
In order make the driver more portable and support other Intel MID
(Mobile Internet Device) platforms we need to move Medfield code from
intel-mid.c core to its own mfld.c file.
This patch contains no functional changes.
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Link: http://lkml.kernel.org/r/1387224459-25746-2-git-send-email-david.a.cohen@linux.intel.com
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Make disabled_cpu_apicid static and read_mostly, and fix a couple of
typos.
Reported-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/20140115182511.GA22737@gmail.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Add disable_cpu_apicid kernel parameter. To use this kernel parameter,
specify an initial APIC ID of the corresponding CPU you want to
disable.
This is mostly used for the kdump 2nd kernel to disable BSP to wake up
multiple CPUs without causing system reset or hang due to sending INIT
from AP to BSP.
Kdump users first figure out initial APIC ID of the BSP, CPU0 in the
1st kernel, for example from /proc/cpuinfo and then set up this kernel
parameter for the 2nd kernel using the obtained APIC ID.
However, doing this procedure at each boot time manually is awkward,
which should be automatically done by user-land service scripts, for
example, kexec-tools on fedora/RHEL distributions.
This design is more flexible than disabling BSP in kernel boot time
automatically in that in kernel boot time we have no choice but
referring to ACPI/MP table to obtain initial APIC ID for BSP, meaning
that the method is not applicable to the systems without such BIOS
tables.
One assumption behind this design is that users get initial APIC ID of
the BSP in still healthy state and so BSP is uniquely kept in
CPU0. Thus, through the kernel parameter, only one initial APIC ID can
be specified.
In a comparison with disabled_cpu_apicid, we use read_apic_id(), not
boot_cpu_physical_apicid, because on some platforms, the variable is
modified to the apicid reported as BSP through MP table and this
function is executed with the temporarily modified
boot_cpu_physical_apicid. As a result, disabled_cpu_apicid kernel
parameter doesn't work well for apicids of APs.
Fixing the wrong handling of boot_cpu_physical_apicid requires some
reviews and tests beyond some platforms and it could take some
time. The fix here is a kind of workaround to focus on the main topic
of this patch.
Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Link: http://lkml.kernel.org/r/20140115064458.1545.38775.stgit@localhost6.localdomain6
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
After the previous patch from Marcelo, the comment before this write
became obsolete. In fact, the write is unnecessary. The calls to
kvm_write_tsc ultimately result in a master clock update as soon as
all TSCs agree and the master clock is re-enabled. This master
clock update will rewrite tsc_timestamp.
So, together with the comment, delete the dead write too.
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To fix a problem related to different resolution of TSC and system clock,
the offset in TSC units is approximated by
delta = vcpu->hv_clock.tsc_timestamp - vcpu->last_guest_tsc
(Guest TSC value at (Guest TSC value at last VM-exit)
the last kvm_guest_time_update
call)
Delta is then later scaled using mult,shift pair found in hv_clock
structure (which is correct against tsc_timestamp in that
structure).
However, if a frequency change is performed between these two points,
this delta is measured using different TSC frequencies, but scaled using
mult,shift pair for one frequency only.
The end result is an incorrect delta.
The bug which this code works around is not the only cause for
clock backwards events. The global accumulator is still
necessary, so remove the max_kernel_ns fix and rely on the
global accumulator for no clock backwards events.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit e66d2ae7c6 moved the assignment
vcpu->arch.apic_base = value above a condition with
(vcpu->arch.apic_base ^ value), causing that check
to always fail. Use old_value, vcpu->arch.apic_base's
old value, in the condition instead.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Having u32 and struct cpuinfo_x86 * by the same name is not very smart,
although it was ok in this case due to the limited scope of u32 c and it
being used only once in there.
Fix this.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1389786735-16751-1-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Limit PIT timer frequency similarly to the limit applied by
LAPIC timer.
Cc: stable@kernel.org
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We rename aesni-intel_avx.S to aesni-intel_avx-x86_64.S to indicate
that it is only used by x86_64 architecture.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This adds the workaround for erratum 793 as a precaution in case not
every BIOS implements it. This addresses CVE-2013-6885.
Erratum text:
[Revision Guide for AMD Family 16h Models 00h-0Fh Processors,
document 51810 Rev. 3.04 November 2013]
793 Specific Combination of Writes to Write Combined Memory Types and
Locked Instructions May Cause Core Hang
Description
Under a highly specific and detailed set of internal timing
conditions, a locked instruction may trigger a timing sequence whereby
the write to a write combined memory type is not flushed, causing the
locked instruction to stall indefinitely.
Potential Effect on System
Processor core hang.
Suggested Workaround
BIOS should set MSR
C001_1020[15] = 1b.
Fix Planned
No fix planned
[ hpa: updated description, fixed typo in MSR name ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20140114230711.GS29865@pd.tnic
Tested-by: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The help text for RANDOMIZE_BASE_MAX_OFFSET was confusing. This has been
clarified, and updated to be an export-only tunable.
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: http://lkml.kernel.org/r/20131210202745.GA2961@www.outflux.net
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Currently we do a read, a dummy write and a final read to fetch
the error code. The value from the final read is taken.
This is not the recommended way and leads to corrupted/lost ESR
values.
Intel(c) 64 and IA-32 Architectures Software Developer's Manual,
Combined Volumes 1, 2ABC, 3ABC, Section 10.5.3 states:
Before attempt to read from the ESR, software should first
write to it. (The value written does not affect the values read
subsequently; only zero may be written in x2APIC mode.) This
write clears any previously logged errors and updates the ESR
with any errors detected since the last write to the ESR.
This write also rearms the APIC error interrupt triggering
mechanism.
This patch removes the first read such that we are conform with
the manual.
On my (very old) Pentium MMX SMP system this patch fixes the
issue that APIC errors:
a) are not always reported and
b) are reported with false error numbers.
Signed-off-by: Richard Weinberger <richard@nod.at>
Cc: seiji.aguchi@hds.com
Cc: rientjes@google.com
Cc: konrad.wilk@oracle.com
Cc: bp@alien8.de
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1389685487-20872-1-git-send-email-richard@nod.at
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We've grown a bunch of microcode loader files all prefixed with
"microcode_". They should be under cpu/ because this is strictly
CPU-related functionality so do that and drop the prefix since they're
in their own directory now which gives that prefix. :)
While at it, drop MICROCODE_INTEL_LIB config item and stash the
functionality under CONFIG_MICROCODE_INTEL as it was its only user.
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
The original idea to use the microcode cache for the APs doesn't pan out
because we do memory allocation there very early and with IRQs disabled
and we don't want to involve GFP_ATOMIC allocations. Not if it can be
helped.
Thus, extend the caching of the BSP patch approach to the APs and
iterate over the ucode in the initrd instead of using the cache. We
still save the relevant patches to it but later, right before we
jettison the initrd.
While at it, fix early ucode loading on 32-bit too.
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
We want to use those in AMD's early loading path too. Also, add a
native_wrmsrl variant.
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
The ramdisk can possibly get relocated if the whole image is not mapped.
And since we're going over it in the microcode loader and fishing out
the relevant microcode patches, we want access it at its new location.
Thus, export it.
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
With various drivers wanting to inject idle time; we get people
calling idle routines outside of the idle loop proper.
Therefore we need to be extra careful about not missing
TIF_NEED_RESCHED -> PREEMPT_NEED_RESCHED propagations.
While looking at this, I also realized there's a small window in the
existing idle loop where we can miss TIF_NEED_RESCHED; when it hits
right after the tif_need_resched() test at the end of the loop but
right before the need_resched() test at the start of the loop.
So move preempt_fold_need_resched() out of the loop where we're
guaranteed to have TIF_NEED_RESCHED set.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-x9jgh45oeayzajz2mjt0y7d6@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use a ring-buffer like multi-version object structure which allows
always having a coherent object; we use this to avoid having to
disable IRQs while reading sched_clock() and avoids a problem when
getting an NMI while changing the cyc2ns data.
MAINLINE PRE POST
sched_clock_stable: 1 1 1
(cold) sched_clock: 329841 331312 257223
(cold) local_clock: 301773 310296 309889
(warm) sched_clock: 38375 38247 25280
(warm) local_clock: 100371 102713 85268
(warm) rdtsc: 27340 27289 24247
sched_clock_stable: 0 0 0
(cold) sched_clock: 382634 372706 301224
(cold) local_clock: 396890 399275 399870
(warm) sched_clock: 38194 38124 25630
(warm) local_clock: 143452 148698 129629
(warm) rdtsc: 27345 27365 24307
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-s567in1e5ekq2nlyhn8f987r@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fengguang Wu's 0day kernel build service reported the following build warning:
arch/x86/kernel/apic/io_apic.c:2211
smp_irq_move_cleanup_interrupt() warn: always true condition '(irq <= -1) => (0-u32max <= (-1))'
because irq is defined as an unsigned int instead of an int.
Fix this trivial error by redefining irq as a signed int. The
remaining consumers of the int are okay.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Link: http://lkml.kernel.org/r/1389620420-7110-1-git-send-email-prarit@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are no __cycles_2_ns() users outside of arch/x86/kernel/tsc.c,
so move it there.
There are no cycles_2_ns() users.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-01lslnavfgo3kmbo4532zlcj@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add the syscalls needed for supporting scheduling algorithms
with extended scheduling parameters (e.g., SCHED_DEADLINE).
In general, it makes possible to specify a periodic/sporadic task,
that executes for a given amount of runtime at each instance, and is
scheduled according to the urgency of their own timing constraints,
i.e.:
- a (maximum/typical) instance execution time,
- a minimum interval between consecutive instances,
- a time constraint by which each instance must be completed.
Thus, both the data structure that holds the scheduling parameters of
the tasks and the system calls dealing with it must be extended.
Unfortunately, modifying the existing struct sched_param would break
the ABI and result in potentially serious compatibility issues with
legacy binaries.
For these reasons, this patch:
- defines the new struct sched_attr, containing all the fields
that are necessary for specifying a task in the computational
model described above;
- defines and implements the new scheduling related syscalls that
manipulate it, i.e., sched_setattr() and sched_getattr().
Syscalls are introduced for x86 (32 and 64 bits) and ARM only, as a
proof of concept and for developing and testing purposes. Making them
available on other architectures is straightforward.
Since no "user" for these new parameters is introduced in this patch,
the implementation of the new system calls is just identical to their
already existing counterpart. Future patches that implement scheduling
policies able to exploit the new data structure must also take care of
modifying the sched_*attr() calls accordingly with their own purposes.
Signed-off-by: Dario Faggioli <raistlin@linux.it>
[ Rewrote to use sched_attr. ]
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
[ Removed sched_setscheduler2() for now. ]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1383831828-15501-3-git-send-email-juri.lelli@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJS0miqAAoJEHm+PkMAQRiGbfgIAJSWEfo8ludknhPcHJabBtxu
75SQAKJlL3sBVnxEc58Rtt8gsKYQIrm4IY5Slunklsn04RxuDUIQMgFoAYR5gQwz
+Myqkw/HOqDe5VStGxtLYpWnfglxVwGDCd7ISfL9AOVy5adMWBxh4Tv+qqQc7aIZ
eF7dy+DD+C6Q3Z5OoV8s0FZDxse29vOf17Nki7+7t8WMqyegYwjoOqNeqocGKsPi
eHLrJgTl4T6jB4l9LKKC154DSKjKOTSwZMWgwK8mToyNLT/ufCiKgXloIjEvZZcY
VVKUtncdHiTf+iqVojgpGBzOEeB5DM83iiapFeDiJg8C9yBzvT8lBtA9aPb5Wgw=
=lEeV
-----END PGP SIGNATURE-----
Merge tag 'v3.13-rc8' into core/locking
Refresh the tree with the latest fixes, before applying new changes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
* acpica: (21 commits)
ACPICA: Update version to 20131218.
ACPICA: Utilities: Cleanup declarations of the acpi_gbl_debug_file global.
ACPICA: Linuxize: Cleanup spaces after special macro invocations.
ACPICA: Interpreter: Add additional debug info for an error case.
ACPICA: Update ACPI example code to make it an actual working program.
ACPICA: Add an error message if the Debugger fails initialization.
ACPICA: Conditionally define a local variable that is used for debug only.
ACPICA: Parser: Updates/fixes for debug output.
ACPICA: Enhance ACPI warning for memory/IO address conflicts.
ACPICA: Update several debug statements - no functional change.
ACPICA: Improve exception handling for GPE block installation.
ACPICA: Add helper macros to extract bus/segment numbers from HEST table.
ACPICA: Tables: Add full support for the PCCT table, update table definition.
ACPICA: Tables: Add full support for the DBG2 table.
ACPICA: Add option to favor 32-bit FADT addresses.
ACPICA: Cleanup the option of forcing the use of the RSDT.
ACPICA: Back port and refine validation of the XSDT root table.
ACPICA: Linux Header: Remove unused OSL prototypes.
ACPICA: Remove unused ACPI_FREE_BUFFER macro. No functional change.
ACPICA: Disassembler: Improve pathname support for emitted External() statements.
...
* acpi-cleanup: (22 commits)
ACPI / tables: Return proper error codes from acpi_table_parse() and fix comment.
ACPI / tables: Check if id is NULL in acpi_table_parse()
ACPI / proc: Include appropriate header file in proc.c
ACPI / EC: Remove unused functions and add prototype declaration in internal.h
ACPI / dock: Include appropriate header file in dock.c
ACPI / PCI: Include appropriate header file in pci_link.c
ACPI / PCI: Include appropriate header file in pci_slot.c
ACPI / EC: Mark the function acpi_ec_add_debugfs() as static in ec_sys.c
ACPI / NVS: Include appropriate header file in nvs.c
ACPI / OSL: Mark the function acpi_table_checksum() as static
ACPI / processor: initialize a variable to silence compiler warning
ACPI / processor: use ACPI_COMPANION() to get ACPI device
ACPI: correct minor typos
ACPI / sleep: Drop redundant acpi_disabled check
ACPI / dock: Drop redundant acpi_disabled check
ACPI / table: Replace '1' with specific error return values
ACPI: remove trailing whitespace
ACPI / IBFT: Fix incorrect <acpi/acpi.h> inclusion in iSCSI boot firmware module
ACPI / i915: Fix incorrect <acpi/acpi.h> inclusions via <linux/acpi_io.h>
SFI / ACPI: Fix warnings reported during builds with W=1
...
Conflicts:
drivers/acpi/nvs.c
drivers/hwmon/asus_atk0110.c
So mce_start_timer() has a 'cpu' argument which is supposed to mean to
start a timer on that cpu. However, the code currently starts a timer on
the *current* cpu the function runs on and causes the sanity-check in
mce_timer_fn to fire:
WARNING: CPU: 0 PID: 0 at arch/x86/kernel/cpu/mcheck/mce.c:1286 mce_timer_fn
because it is running on the wrong cpu.
This was triggered by Prarit Bhargava <prarit@redhat.com> by offlining
all the cpus in succession.
Then, we were fiddling with the CMCI storm settings when starting the
timer whereas there's no need for that - if there's storm happening
on this newly restarted cpu, we're going to be in normal CMCI mode
initially and then when the CMCI interrupt starts firing, we're going to
go to the polling mode with the timer real soon.
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Reviewed-by: Chen, Gong <gong.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/1387722156-5511-1-git-send-email-prarit@redhat.com
During heavy CPU-hotplug operations the following spurious kernel warnings
can trigger:
do_IRQ: No ... irq handler for vector (irq -1)
[ See: https://bugzilla.kernel.org/show_bug.cgi?id=64831 ]
When downing a cpu it is possible that there are unhandled irqs
left in the APIC IRR register. The following code path shows
how the problem can occur:
1. CPU 5 is to go down.
2. cpu_disable() on CPU 5 executes with interrupt flag cleared
by local_irq_save() via stop_machine().
3. IRQ 12 asserts on CPU 5, setting IRR but not ISR because
interrupt flag is cleared (CPU unabled to handle the irq)
4. IRQs are migrated off of CPU 5, and the vectors' irqs are set
to -1. 5. stop_machine() finishes cpu_disable()
6. cpu_die() for CPU 5 executes in normal context.
7. CPU 5 attempts to handle IRQ 12 because the IRR is set for
IRQ 12. The code attempts to find the vector's IRQ and cannot
because it has been set to -1. 8. do_IRQ() warning displays
warning about CPU 5 IRQ 12.
I added a debug printk to output which CPU & vector was
retriggered and discovered that that we are getting bogus
events. I see a 100% correlation between this debug printk in
fixup_irqs() and the do_IRQ() warning.
This patchset resolves this by adding definitions for
VECTOR_UNDEFINED(-1) and VECTOR_RETRIGGERED(-2) and modifying
the code to use them.
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=64831
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Reviewed-by: Rui Wang <rui.y.wang@intel.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Yang Zhang <yang.z.zhang@Intel.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: janet.morgan@Intel.com
Cc: tony.luck@Intel.com
Cc: ruiv.wang@gmail.com
Link: http://lkml.kernel.org/r/1388938252-16627-1-git-send-email-prarit@redhat.com
[ Cleaned up the code a bit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
A number of situations currently require the heavyweight smp_mb(),
even though there is no need to order prior stores against later
loads. Many architectures have much cheaper ways to handle these
situations, but the Linux kernel currently has no portable way
to make use of them.
This commit therefore supplies smp_load_acquire() and
smp_store_release() to remedy this situation. The new
smp_load_acquire() primitive orders the specified load against
any subsequent reads or writes, while the new smp_store_release()
primitive orders the specifed store against any prior reads or
writes. These primitives allow array-based circular FIFOs to be
implemented without an smp_mb(), and also allow a theoretical
hole in rcu_assign_pointer() to be closed at no additional
expense on most architectures.
In addition, the RCU experience transitioning from explicit
smp_read_barrier_depends() and smp_wmb() to rcu_dereference()
and rcu_assign_pointer(), respectively resulted in substantial
improvements in readability. It therefore seems likely that
replacing other explicit barriers with smp_load_acquire() and
smp_store_release() will provide similar benefits. It appears
that roughly half of the explicit barriers in core kernel code
might be so replaced.
[Changelog by PaulMck]
Reviewed-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Victor Kaplansky <VICTORK@il.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: http://lkml.kernel.org/r/20131213150640.908486364@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch adds support for the Intel RAPL energy counter
PP1 (Power Plane 1).
On client processors, it usually corresponds to the
energy consumption of the builtin graphic card. That
is why the sysfs event is called energy-gpu.
New event:
- name: power/energy-gpu/
- code: event=0x4
- unit: 2^-32 Joules
On processors without graphics, this should count 0.
The patch only enables this event on client processors.
Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: ak@linux.intel.com
Cc: acme@redhat.com
Cc: jolsa@redhat.com
Cc: zheng.z.yan@intel.com
Cc: bp@alien8.de
Cc: vincent.weaver@maine.edu
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1389176153-3128-3-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus disliked the _no_lockdep() naming, so instead
use the more-consistent raw_* prefix to the non-lockdep
enabled seqcount methods.
This also adds raw_ methods for the write operations
as well, which will be utilized in a following patch.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Krzysztof Hałasa <khalasa@piap.pl>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Willy Tarreau <w@1wt.eu>
Link: http://lkml.kernel.org/r/1388704274-5278-1-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Before we do an EMMS in the AMD FXSAVE information leak workaround we
need to clear any pending exceptions, otherwise we trap with a
floating-point exception inside this code.
Reported-by: halfdog <me@halfdog.net>
Tested-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/CA%2B55aFxQnY_PCG_n4=0w-VG=YLXL-yr7oMxyy0WU2gCBAf3ydg@mail.gmail.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
* pci/resource:
PCI: Allocate 64-bit BARs above 4G when possible
PCI: Enforce bus address limits in resource allocation
PCI: Split out bridge window override of minimum allocation address
agp/ati: Use PCI_COMMAND instead of hard-coded 4
agp/intel: Use CPU physical address, not bus address, for ioremap()
agp/intel: Use pci_bus_address() to get GTTADR bus address
agp/intel: Use pci_bus_address() to get MMADR bus address
agp/intel: Support 64-bit GMADR
agp/intel: Rename gtt_bus_addr to gtt_phys_addr
drm/i915: Rename gtt_bus_addr to gtt_phys_addr
agp: Use pci_resource_start() to get CPU physical address for BAR
agp: Support 64-bit APBASE
PCI: Add pci_bus_address() to get bus address of a BAR
PCI: Convert pcibios_resource_to_bus() to take a pci_bus, not a pci_dev
PCI: Change pci_bus_region addresses to dma_addr_t
The usage of 'select' means it will enable the CONFIG
options without checking their dependencies. That meant
we would inadvertently turn on CONFIG_XEN_PVHM while its
core dependency (CONFIG_PCI) was turned off.
This patch fixes the warnings and compile failures:
warning: (XEN_PVH) selects XEN_PVHVM which has unmet direct
dependencies (HYPERVISOR_GUEST && XEN && PCI && X86_LOCAL_APIC)
Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Function tracing callbacks expect to have the ftrace_ops that registered it
passed to them, not the address of the variable that holds the ftrace_ops
that registered it.
Use a mov instead of a lea to store the ftrace_ops into the parameter
of the function tracing callback.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/20131113152004.459787f9@gandalf.local.home
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org> # v3.8+
Current Intel SOC cores use a MailBox Interface (MBI) to provide access to
configuration registers on devices (called units) connected to the system
fabric. This is a support driver that implements access to this interface on
those platforms that can enumerate the device using PCI. Initial support is for
BayTrail, for which port definitons are provided. This is a requirement for
implementing platform specific features (e.g. RAPL driver requires this to
perform platform specific power management using the registers in PUNIT).
Dependant modules should select IOSF_MBI in their respective Kconfig
configuraiton. Serialized access is handled by all exported routines with
spinlocks.
The API includes 3 functions for access to unit registers:
int iosf_mbi_read(u8 port, u8 opcode, u32 offset, u32 *mdr)
int iosf_mbi_write(u8 port, u8 opcode, u32 offset, u32 mdr)
int iosf_mbi_modify(u8 port, u8 opcode, u32 offset, u32 mdr, u32 mask)
port: indicating the unit being accessed
opcode: the read or write port specific opcode
offset: the register offset within the port
mdr: the register data to be read, written, or modified
mask: bit locations in mdr to change
Returns nonzero on error
Note: GPU code handles access to the GFX unit. Therefore access to that unit
with this driver is disallowed to avoid conflicts.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: http://lkml.kernel.org/r/1389216471-734-1-git-send-email-david.e.box@linux.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
After free_loaded_vmcs executes, the "loaded_vmcs" structure
is kfreed, and now vmx->loaded_vmcs points to a kfreed area.
Subsequent free_loaded_vmcs then attempts to manipulate
vmx->loaded_vmcs.
Switch the order to avoid the problem.
https://bugzilla.redhat.com/show_bug.cgi?id=1047892
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
fix the 'vcpi' typos when apic_debug is enabled.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
According to Table C-1 of Intel SDM 3C, a VM exit happens on an I/O instruction when
"use I/O bitmaps" VM-execution control was 0 _and_ the "unconditional I/O exiting"
VM-execution control was 1. So we can't just check "unconditional I/O exiting" alone.
This patch was improved by suggestion from Jan Kiszka.
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Zhihui Zhang <zzhsuny@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This change adds a runtime option that will force ACPICA to use the
RSDT instead of the XSDT. Although the ACPI spec requires that an XSDT
be used instead of the RSDT, the XSDT has been found to be corrupt or
ill-formed on some machines.
This option is already in the Linux kernel. When it is back ported to
ACPICA, code is re-written to follow ACPICA coding style. This patch
is the generation of the integration.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When allocating space for 32-bit BARs, we previously limited RESOURCE
addresses so they would fit in 32 bits. However, the BUS address need not
be the same as the resource address, and it's the bus address that must fit
in the 32-bit BAR.
This patch adds:
- pci_clip_resource_to_region(), which clips a resource so it contains
only the range that maps to the specified bus address region, e.g., to
clip a resource to 32-bit bus addresses, and
- pci_bus_alloc_from_region(), which allocates space for a resource from
the specified bus address region,
and changes pci_bus_alloc_resource() to allocate space for 64-bit BARs from
the entire bus address region, and space for 32-bit BARs from only the bus
address region below 4GB.
If we had this window:
pci_root HWP0002:0a: host bridge window [mem 0xf0180000000-0xf01fedfffff] (bus address [0x80000000-0xfedfffff])
we previously could not put a 32-bit BAR there, because the CPU addresses
don't fit in 32 bits. This patch fixes this, so we can use this space for
32-bit BARs.
It's also possible (though unlikely) to have resources with 32-bit CPU
addresses but bus addresses above 4GB. In this case the previous code
would allocate space that a 32-bit BAR could not map.
Remove PCIBIOS_MAX_MEM_32, which is no longer used.
[bhelgaas: reworked starting from http://lkml.kernel.org/r/1386658484-15774-3-git-send-email-yinghai@kernel.org]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Oddly enough it compiles for my ancient compiler but with
the supplied .config it does blow up. Fix is easy enough.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>. Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.
[ hpa: undid incorrect removal from arch/x86/kernel/head_32.S ]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Link: http://lkml.kernel.org/r/1389054026-12947-1-git-send-email-paul.gortmaker@windriver.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Conflicts:
drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
net/ipv6/ip6_tunnel.c
net/ipv6/ip6_vti.c
ipv6 tunnel statistic bug fixes conflicting with consolidation into
generic sw per-cpu net stats.
qlogic conflict between queue counting bug fix and the addition
of multiple MAC address support.
Signed-off-by: David S. Miller <davem@davemloft.net>
PVH allows PV linux guest to utilize hardware extended capabilities,
such as running MMU updates in a HVM container.
The Xen side defines PVH as (from docs/misc/pvh-readme.txt,
with modifications):
"* the guest uses auto translate:
- p2m is managed by Xen
- pagetables are owned by the guest
- mmu_update hypercall not available
* it uses event callback and not vlapic emulation,
* IDT is native, so set_trap_table hcall is also N/A for a PVH guest.
For a full list of hcalls supported for PVH, see pvh_hypercall64_table
in arch/x86/hvm/hvm.c in xen. From the ABI prespective, it's mostly a
PV guest with auto translate, although it does use hvm_op for setting
callback vector."
Use .ascii and .asciz to define xen feature string. Note, the PVH
string must be in a single line (not multiple lines with \) to keep the
assembler from putting null char after each string before \.
This patch allows it to be configured and enabled.
We also use introduce the 'XEN_ELFNOTE_SUPPORTED_FEATURES' ELF note to
tell the hypervisor that 'hvm_callback_vector' is what the kernel
needs. We can not put it in 'XEN_ELFNOTE_FEATURES' as older hypervisor
parse fields they don't understand as errors and refuse to load
the kernel. This work-around fixes the problem.
Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
In PVH the shared grant frame is the PFN and not MFN,
hence its mapped via the same code path as HVM.
The allocation of the grant frame is done differently - we
do not use the early platform-pci driver and have an
ioremap area - instead we use balloon memory and stitch
all of the non-contingous pages in a virtualized area.
That means when we call the hypervisor to replace the GMFN
with a XENMAPSPACE_grant_table type, we need to lookup the
old PFN for every iteration instead of assuming a flat
contingous PFN allocation.
Lastly, we only use v1 for grants. This is because PVHVM
is not able to use v2 due to no XENMEM_add_to_physmap
calls on the error status page (see commit
69e8f430e2
xen/granttable: Disable grant v2 for HVM domains.)
Until that is implemented this workaround has to
be in place.
Also per suggestions by Stefano utilize the PVHVM paths
as they share common functionality.
v2 of this patch moves most of the PVH code out in the
arch/x86/xen/grant-table driver and touches only minimally
the generic driver.
v3, v4: fixes us some of the code due to earlier patches.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The 'xen_hvm_resume_frames' used to be an 'unsigned long'
and contain the virtual address of the grants. That was OK
for most architectures (PVHVM, ARM) were the grants are contiguous
in memory. That however is not the case for PVH - in which case
we will have to do a lookup for each virtual address for the PFN.
Instead of doing that, lets make it a structure which will contain
the array of PFNs, the virtual address and the count of said PFNs.
Also provide a generic functions: gnttab_setup_auto_xlat_frames and
gnttab_free_auto_xlat_frames to populate said structure with
appropriate values for PVHVM and ARM.
To round it off, change the name from 'xen_hvm_resume_frames' to
a more descriptive one - 'xen_auto_xlat_grant_frames'.
For PVH, in patch "xen/pvh: Piggyback on PVHVM for grant driver"
we will populate the 'xen_auto_xlat_grant_frames' by ourselves.
v2 moves the xen_remap in the gnttab_setup_auto_xlat_frames
and also introduces xen_unmap for gnttab_free_auto_xlat_frames.
Suggested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[v3: Based on top of 'asm/xen/page.h: remove redundant semicolon']
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
PVH is a PV guest with a twist - there are certain things
that work in it like HVM and some like PV. There is
a similar mode - PVHVM where we run in HVM mode with
PV code enabled - and this patch explores that.
The most notable PV interfaces are the XenBus and event channels.
We will piggyback on how the event channel mechanism is
used in PVHVM - that is we want the normal native IRQ mechanism
and we will install a vector (hvm callback) for which we
will call the event channel mechanism.
This means that from a pvops perspective, we can use
native_irq_ops instead of the Xen PV specific. Albeit in the
future we could support pirq_eoi_map. But that is
a feature request that can be shared with PVHVM.
Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
In xen_add_extra_mem() we can skip updating P2M as it's managed
by Xen. PVH maps the entire IO space, but only RAM pages need
to be repopulated.
Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The VCPU bringup protocol follows the PV with certain twists.
From xen/include/public/arch-x86/xen.h:
Also note that when calling DOMCTL_setvcpucontext and VCPU_initialise
for HVM and PVH guests, not all information in this structure is updated:
- For HVM guests, the structures read include: fpu_ctxt (if
VGCT_I387_VALID is set), flags, user_regs, debugreg[*]
- PVH guests are the same as HVM guests, but additionally use ctrlreg[3] to
set cr3. All other fields not used should be set to 0.
This is what we do. We piggyback on the 'xen_setup_gdt' - but modify
a bit - we need to call 'load_percpu_segment' so that 'switch_to_new_gdt'
can load per-cpu data-structures. It has no effect on the VCPU0.
We also piggyback on the %rdi register to pass in the CPU number - so
that when we bootup a new CPU, the cpu_bringup_and_idle will have
passed as the first parameter the CPU number (via %rdi for 64-bit).
Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
During early bootup we start life using the Xen provided
GDT, which means that we are running with %cs segment set
to FLAT_KERNEL_CS (FLAT_RING3_CS64 0xe033, GDT index 261).
But for PVH we want to be use HVM type mechanism for
segment operations. As such we need to switch to the HVM
one and also reload ourselves with the __KERNEL_CS:eip
to run in the proper GDT and segment.
For HVM this is usually done in 'secondary_startup_64' in
(head_64.S) but since we are not taking that bootup
path (we start in PV - xen_start_kernel) we need to do
that in the early PV bootup paths.
For good measure we also zero out the %fs, %ds, and %es
(not strictly needed as Xen has already cleared them
for us). The %gs is loaded by 'switch_to_new_gdt'.
Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
For PVHVM the shared_info structure is provided via the same way
as for normal PV guests (see include/xen/interface/xen.h).
That is during bootup we get 'xen_start_info' via the %esi register
in startup_xen. Then later we extract the 'shared_info' from said
structure (in xen_setup_shared_info) and start using it.
The 'xen_setup_shared_info' is all setup to work with auto-xlat
guests, but there are two functions which it calls that are not:
xen_setup_mfn_list_list and xen_setup_vcpu_info_placement.
This patch modifies the P2M code (xen_setup_mfn_list_list)
while the "Piggyback on PVHVM for event channels" modifies
the xen_setup_vcpu_info_placement.
Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
We also optimize one - the TLB flush. The native operation would
needlessly IPI offline VCPUs causing extra wakeups. Using the
Xen one avoids that and lets the hypervisor determine which
VCPU needs the TLB flush.
Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
.. which are surprisingly small compared to the amount for PV code.
PVH uses mostly native mmu ops, we leave the generic (native_*) for
the majority and just overwrite the baremetal with the ones we need.
At startup, we are running with pre-allocated page-tables
courtesy of the tool-stack. But we still need to graft them
in the Linux initial pagetables. However there is no need to
unpin/pin and change them to R/O or R/W.
Note that the xen_pagetable_init due to 7836fec9d0994cc9c9150c5a33f0eb0eb08a335a
"xen/mmu/p2m: Refactor the xen_pagetable_init code." does not
need any changes - we just need to make sure that xen_post_allocator_init
does not alter the pvops from the default native one.
Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Stefano noticed that the code runs only under 64-bit so
the comments about 32-bit are pointless.
Also we change the condition for xen_revector_p2m_tree
returning the same value (because it could not allocate
a swath of space to put the new P2M in) or it had been
called once already. In such we return early from the
function.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The revectoring and copying of the P2M only happens when
!auto-xlat and on 64-bit builds. It is not obvious from
the code, so lets have seperate 32 and 64-bit functions.
We also invert the check for auto-xlat to make the code
flow simpler.
Suggested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
P2M is not available for PVH. Fortunatly for us the
P2M code already has mostly the support for auto-xlat guest thanks to
commit 3d24bbd7dd
"grant-table: call set_phys_to_machine after mapping grant refs"
which: "
introduces set_phys_to_machine calls for auto_translated guests
(even on x86) in gnttab_map_refs and gnttab_unmap_refs.
translated by swiotlb-xen... " so we don't need to muck much.
with above mentioned "commit you'll get set_phys_to_machine calls
from gnttab_map_refs and gnttab_unmap_refs but PVH guests won't do
anything with them " (Stefano Stabellini) which is OK - we want
them to be NOPs.
This is because we assume that an "IOMMU is always present on the
plaform and Xen is going to make the appropriate IOMMU pagetable
changes in the hypercall implementation of GNTTABOP_map_grant_ref
and GNTTABOP_unmap_grant_ref, then eveything should be transparent
from PVH priviligied point of view and DMA transfers involving
foreign pages keep working with no issues[sp]
Otherwise we would need a P2M (and an M2P) for PVH priviligied to
track these foreign pages .. (see arch/arm/xen/p2m.c)."
(Stefano Stabellini).
We still have to inhibit the building of the P2M tree.
That had been done in the past by not calling
xen_build_dynamic_phys_to_machine (which setups the P2M tree
and gives us virtual address to access them). But we are missing
a check for xen_build_mfn_list_list - which was continuing to setup
the P2M tree and would blow up at trying to get the virtual
address of p2m_missing (which would have been setup by
xen_build_dynamic_phys_to_machine).
Hence a check is needed to not call xen_build_mfn_list_list when
running in auto-xlat mode.
Instead of replicating the check for auto-xlat in enlighten.c
do it in the p2m.c code. The reason is that the xen_build_mfn_list_list
is called also in xen_arch_post_suspend without any checks for
auto-xlat. So for PVH or PV with auto-xlat - we would needlessly
allocate space for an P2M tree.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
We don't use the filtering that 'xen_cpuid' is doing
because the hypervisor treats 'XEN_EMULATE_PREFIX' as
an invalid instruction. This means that all of the filtering
will have to be done in the hypervisor/toolstack.
Without the filtering we expose to the guest the:
- cpu topology (sockets, cores, etc);
- the APERF (which the generic scheduler likes to
use), see 5e62625420
"xen/setup: filter APERFMPERF cpuid feature out"
- and the inability to figure out whether MWAIT_LEAF
should be exposed or not. See
df88b2d96e
"xen/enlighten: Disable MWAIT_LEAF so that acpi-pad won't be loaded."
- x2apic, see 4ea9b9aca9
"xen: mask x2APIC feature in PV"
We also check for vector callback early on, as it is a required
feature. PVH also runs at default kernel IOPL.
Finally, pure PV settings are moved to a separate function that are
only called for pure PV, ie, pv with pvmmu. They are also #ifdef
with CONFIG_XEN_PVMMU.
Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Which is a PV guest with auto page translation enabled
and with vector callback. It is a cross between PVHVM and PV.
The Xen side defines PVH as (from docs/misc/pvh-readme.txt,
with modifications):
"* the guest uses auto translate:
- p2m is managed by Xen
- pagetables are owned by the guest
- mmu_update hypercall not available
* it uses event callback and not vlapic emulation,
* IDT is native, so set_trap_table hcall is also N/A for a PVH guest.
For a full list of hcalls supported for PVH, see pvh_hypercall64_table
in arch/x86/hvm/hvm.c in xen. From the ABI prespective, it's mostly a
PV guest with auto translate, although it does use hvm_op for setting
callback vector."
Also we use the PV cpuid, albeit we can use the HVM (native) cpuid.
However, we do have a fair bit of filtering in the xen_cpuid and
we can piggyback on that until the hypervisor/toolstack filters
the appropiate cpuids. Once that is done we can swap over to
use the native one.
We setup a Kconfig entry that is disabled by default and
cannot be enabled.
Note that on ARM the concept of PVH is non-existent. As Ian
put it: "an ARM guest is neither PV nor HVM nor PVHVM.
It's a bit like PVH but is different also (it's further towards
the H end of the spectrum than even PVH).". As such these
options (PVHVM, PVH) are never enabled nor seen on ARM
compilations.
Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Most of the functions in page.h are prefaced with
if (xen_feature(XENFEAT_auto_translated_physmap))
return mfn;
Except the mfn_to_local_pfn. At a first sight, the function
should work without this patch - as the 'mfn_to_mfn' has
a similar check. But there are no such check in the
'get_phys_to_machine' function - so we would crash in there.
This fixes it by following the convention of having the
check for auto-xlat in these static functions.
Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Commit bee980d9e (xen/events: Handle VIRQ_TIMER before any other hardirq
in event loop) effectively made the VIRQ_TIMER the highest priority event
when using the 2-level ABI.
Set the VIRQ_TIMER priority to the highest so this behaviour is retained
when using the FIFO-based ABI.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The .inittext section tries to aggregate all functions which are
needed to get a message out in the case of a load failure. However,
putchar() uses intcall(), so intcall() should be in the .inittext
section.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-twxm8igouzbmsklmf6lfyq0w@git.kernel.org
This reverts commit 28b48688 ("x86, boot: use .code16gcc instead
of .code16").
Versions of binutils older than 2.16 are already not working, so this
workaround is no longer necessary either. At the same time, some of
the transformations that .code16gcc does can be *extremely*
counterintuitive to a human programmer.
[ hpa: folded ret -> retl and call -> calll fixes from followup patch ]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Link: http://lkml.kernel.org/r/1388788242.2391.75.camel@shinybook.infradead.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Commit ff47ab4ff3 "x86: Add 1/2/4/8 byte optimization to 64bit
__copy_{from,to}_user_inatomic" added a "_nocheck" call in between
the copy_to/from_user() and copy_user_generic(). As both the
normal and nocheck versions of theses calls use the proper __user
annotation, a typecast to remove it should not be added.
This causes sparse to spin out the following warnings:
arch/x86/include/asm/uaccess_64.h:207:47: warning: incorrect type in argument 2 (different address spaces)
arch/x86/include/asm/uaccess_64.h:207:47: expected void const [noderef] <asn:1>*src
arch/x86/include/asm/uaccess_64.h:207:47: got void const *<noident>
arch/x86/include/asm/uaccess_64.h:207:47: warning: incorrect type in argument 2 (different address spaces)
arch/x86/include/asm/uaccess_64.h:207:47: expected void const [noderef] <asn:1>*src
arch/x86/include/asm/uaccess_64.h:207:47: got void const *<noident>
arch/x86/include/asm/uaccess_64.h:207:47: warning: incorrect type in argument 2 (different address spaces)
arch/x86/include/asm/uaccess_64.h:207:47: expected void const [noderef] <asn:1>*src
arch/x86/include/asm/uaccess_64.h:207:47: got void const *<noident>
arch/x86/include/asm/uaccess_64.h:207:47: warning: incorrect type in argument 2 (different address spaces)
arch/x86/include/asm/uaccess_64.h:207:47: expected void const [noderef] <asn:1>*src
arch/x86/include/asm/uaccess_64.h:207:47: got void const *<noident>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20140103164500.5f6478f5@gandalf.local.home
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Since we have xen_has_pv_devices,xen_has_pv_disk_devices,
xen_has_pv_nic_devices, and xen_has_pv_and_legacy_disk_devices
to figure out the different 'unplug' behaviors - lets
use those instead of this single int.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The user has the option of disabling the platform driver:
00:02.0 Unassigned class [ff80]: XenSource, Inc. Xen Platform Device (rev 01)
which is used to unplug the emulated drivers (IDE, Realtek 8169, etc)
and allow the PV drivers to take over. If the user wishes
to disable that they can set:
xen_platform_pci=0
(in the guest config file)
or
xen_emul_unplug=never
(on the Linux command line)
except it does not work properly. The PV drivers still try to
load and since the Xen platform driver is not run - and it
has not initialized the grant tables, most of the PV drivers
stumble upon:
input: Xen Virtual Keyboard as /devices/virtual/input/input5
input: Xen Virtual Pointer as /devices/virtual/input/input6M
------------[ cut here ]------------
kernel BUG at /home/konrad/ssd/konrad/linux/drivers/xen/grant-table.c:1206!
invalid opcode: 0000 [#1] SMP
Modules linked in: xen_kbdfront(+) xenfs xen_privcmd
CPU: 6 PID: 1389 Comm: modprobe Not tainted 3.13.0-rc1upstream-00021-ga6c892b-dirty #1
Hardware name: Xen HVM domU, BIOS 4.4-unstable 11/26/2013
RIP: 0010:[<ffffffff813ddc40>] [<ffffffff813ddc40>] get_free_entries+0x2e0/0x300
Call Trace:
[<ffffffff8150d9a3>] ? evdev_connect+0x1e3/0x240
[<ffffffff813ddd0e>] gnttab_grant_foreign_access+0x2e/0x70
[<ffffffffa0010081>] xenkbd_connect_backend+0x41/0x290 [xen_kbdfront]
[<ffffffffa0010a12>] xenkbd_probe+0x2f2/0x324 [xen_kbdfront]
[<ffffffff813e5757>] xenbus_dev_probe+0x77/0x130
[<ffffffff813e7217>] xenbus_frontend_dev_probe+0x47/0x50
[<ffffffff8145e9a9>] driver_probe_device+0x89/0x230
[<ffffffff8145ebeb>] __driver_attach+0x9b/0xa0
[<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230
[<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230
[<ffffffff8145cf1c>] bus_for_each_dev+0x8c/0xb0
[<ffffffff8145e7d9>] driver_attach+0x19/0x20
[<ffffffff8145e260>] bus_add_driver+0x1a0/0x220
[<ffffffff8145f1ff>] driver_register+0x5f/0xf0
[<ffffffff813e55c5>] xenbus_register_driver_common+0x15/0x20
[<ffffffff813e76b3>] xenbus_register_frontend+0x23/0x40
[<ffffffffa0015000>] ? 0xffffffffa0014fff
[<ffffffffa001502b>] xenkbd_init+0x2b/0x1000 [xen_kbdfront]
[<ffffffff81002049>] do_one_initcall+0x49/0x170
.. snip..
which is hardly nice. This patch fixes this by having each
PV driver check for:
- if running in PV, then it is fine to execute (as that is their
native environment).
- if running in HVM, check if user wanted 'xen_emul_unplug=never',
in which case bail out and don't load any PV drivers.
- if running in HVM, and if PCI device 5853:0001 (xen_platform_pci)
does not exist, then bail out and not load PV drivers.
- (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=ide-disks',
then bail out for all PV devices _except_ the block one.
Ditto for the network one ('nics').
- (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=unnecessary'
then load block PV driver, and also setup the legacy IDE paths.
In (v3) make it actually load PV drivers.
Reported-by: Sander Eikelenboom <linux@eikelenboom.it
Reported-by: Anthony PERARD <anthony.perard@citrix.com>
Reported-and-Tested-by: Fabio Fantoni <fabio.fantoni@m2r.biz>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[v2: Add extra logic to handle the myrid ways 'xen_emul_unplug'
can be used per Ian and Stefano suggestion]
[v3: Make the unnecessary case work properly]
[v4: s/disks/ide-disks/ spotted by Fabio]
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> [for PCI parts]
CC: stable@vger.kernel.org
In case without CONFIG_EFI, there will be below build error:
arch/x86/built-in.o: In function `setup_arch':
(.init.text+0x9dc): undefined reference to `parse_efi_setup'
Thus fix it by adding blank inline function in asm/efi.h
Also remove an unused declaration for variable efi_data_len.
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
kbuild test robot report below error for randconfig:
arch/x86/kernel/ksysfs.c: In function 'get_setup_data_paddr':
arch/x86/kernel/ksysfs.c:81:3: error: implicit declaration of function 'ioremap_cache' [-Werror=implicit-function-declaration]
arch/x86/kernel/ksysfs.c:86:3: error: implicit declaration of function 'iounmap' [-Werror=implicit-function-declaration]
Fix it by including <asm/io.h> in ksysfs.c
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Architectures which might use an i8042 for serial IO to keyboard,
mouse, etc should select ARCH_MIGHT_HAVE_PC_SERIO.
Signed-off-by: Mark Salter <msalter@redhat.com>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Three reasons for doing this: 1. arch.walk_mmu points to arch.mmu anyway
in case nested EPT wasn't in use. 2. this aligns VMX with SVM. But 3. is
most important: nested_cpu_has_ept(vmcs12) queries the VMCS page, and if
one guest VCPU manipulates the page of another VCPU in L2, we may be
fooled to skip over the nested_ept_uninit_mmu_context, leaving mmu in
nested state. That can crash the host later on if nested_ept_get_cr3 is
invoked while L1 already left vmxon and nested.current_vmcs12 became
NULL therefore.
Cc: stable@kernel.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
It seems commit d764593a "crypto: aesni - AVX and AVX2 version of AESNI-GCM
encode and decode" breaks a build on x86_32 since it's designed only for
x86_64. This patch makes a compilation unit conditional to CONFIG_64BIT and
functions usage to CONFIG_X86_64.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update arch.apic_base before triggering recalculate_apic_map. Otherwise
the recalculation will work against the previous state of the APIC and
will fail to build the correct map when an APIC is hardware-enabled
again.
This fixes a regression of 1e08ec4a13.
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Pull x86 fixes from Peter Anvin:
"There is a small EFI fix and a big power regression fix in this batch.
My queue also had a fix for downing a CPU when there are insufficient
number of IRQ vectors available, but I'm holding that one for now due
to recent bug reports"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Don't select EFI from certain special ACPI drivers
x86 idle: Repair large-server 50-watt idle-power regression
There's no need to save the runtime map details in global variables, the
values are only required to pass to efi_runtime_map_setup().
And because 'nr_efi_runtime_map' isn't needed, get_nr_runtime_map() can
be deleted along with 'efi_data_len'.
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Currently e820_reserve_setup_data() is called before parsing early
params, it works in normal case. But for memmap=exactmap, the final
memory ranges are created after parsing memmap= cmdline params, so the
previous e820_reserve_setup_data() has no effect. For example,
setup_data ranges will still be marked as normal system ram, thus when
later sysfs driver ioremap them kernel will warn about mapping normal
ram.
This patch fix it by moving the e820_reserve_setup_data() callback after
parsing early params so they can be set as reserved ranges and later
ioremap will be fine with it.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Borislav Petkov <bp@suse.de>
Tested-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
kexec-tools use boot_params for getting the 1st kernel hardware_subarch,
the kexec kernel EFI runtime support also needs to read the old efi_info
from boot_params. Currently it exists in debugfs which is not a good
place for such infomation. Per HPA, we should avoid "sploit debugfs".
In this patch /sys/kernel/boot_params are exported, also the setup_data is
exported as a subdirectory. kexec-tools is using debugfs for hardware_subarch
for a long time now so we're not removing it yet.
Structure is like below:
/sys/kernel/boot_params
|__ data /* boot_params in binary*/
|__ setup_data
| |__ 0 /* the first setup_data node */
| | |__ data /* setup_data node 0 in binary*/
| | |__ type /* setup_data type of setup_data node 0, hex string */
[snip]
|__ version /* boot protocal version (in hex, "0x" prefixed)*/
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Borislav Petkov <bp@suse.de>
Tested-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Old kexec-tools can not load new kernels. The reason is kexec-tools does
not fill efi_info in x86 setup header previously, thus EFI failed to
initialize. In new kexec-tools it will by default to fill efi_info and
pass other EFI required infomation to 2nd kernel so kexec kernel EFI
initialization can succeed finally.
To prevent from breaking userspace, add a new xloadflags bit so
kexec-tools can check the flag and switch to old logic.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Borislav Petkov <bp@suse.de>
Tested-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Add a new setup_data type SETUP_EFI for kexec use. Passing the saved
fw_vendor, runtime, config tables and EFI runtime mappings.
When entering virtual mode, directly mapping the EFI runtime regions
which we passed in previously. And skip the step to call
SetVirtualAddressMap().
Specially for HP z420 workstation we need save the smbios physical
address. The kernel boot sequence proceeds in the following order.
Step 2 requires efi.smbios to be the physical address. However, I found
that on HP z420 EFI system table has a virtual address of SMBIOS in step
1. Hence, we need set it back to the physical address with the smbios
in efi_setup_data. (When it is still the physical address, it simply
sets the same value.)
1. efi_init() - Set efi.smbios from EFI system table
2. dmi_scan_machine() - Temporary map efi.smbios to access SMBIOS table
3. efi_enter_virtual_mode() - Map EFI ranges
Tested on ovmf+qemu, lenovo thinkpad, a dell laptop and an
HP z420 workstation.
Signed-off-by: Dave Young <dyoung@redhat.com>
Tested-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
gcc can under very specific circumstances realize that the code
sequence:
foo += bar;
if (foo < bar) ...
... is equivalent to a carry out from the addition. Tweak the
implementation of access_ok() (specifically __chk_range_not_ok()) to
make it more likely that gcc will make that connection. It isn't
fool-proof (sometimes gcc seems to think it can make better code with
lea, and ends up with a second comparison), still, but it seems to be
able to connect the two more frequently this way.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/CA%2B55aFzPBdbfKovMT8Edr4SmE2_=%2BOKJFac9XW2awegogTkVTA@mail.gmail.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
It turns out that the assembly variant doesn't actually produce that
good code, presumably partly because it creates a long dependency
chain with no scheduling, and partly because we cannot get a flags
result out of gcc (which could be fixed with asm goto, but it turns
out not to be worth it.)
The C code allows gcc to schedule and generate multiple (easily
predictable) branches, and as a side benefit we can really optimize
the case where the size is constant.
Link: http://lkml.kernel.org/r/CA%2B55aFzPBdbfKovMT8Edr4SmE2_=%2BOKJFac9XW2awegogTkVTA@mail.gmail.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
kexec kernel will need exactly same mapping for EFI runtime memory
ranges. Thus here export the runtime ranges mapping to sysfs,
kexec-tools will assemble them and pass to 2nd kernel via setup_data.
Introducing a new directory /sys/firmware/efi/runtime-map just like
/sys/firmware/memmap. Containing below attribute in each file of that
directory:
attribute num_pages phys_addr type virt_addr
Signed-off-by: Dave Young <dyoung@redhat.com>
Tested-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Export fw_vendor, runtime and config table physical addresses to
/sys/firmware/efi/{fw_vendor,runtime,config_table} because kexec kernels
need them.
From EFI spec these 3 variables will be updated to virtual address after
entering virtual mode. But kernel startup code will need the physical
address.
Signed-off-by: Dave Young <dyoung@redhat.com>
Tested-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Add two small functions:
efi_merge_regions() and efi_map_regions(), efi_enter_virtual_mode()
calls them instead of embedding two long for loop.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Borislav Petkov <bp@suse.de>
Tested-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Current code check boot service region with kernel text region by:
start+size >= __pa_symbol(_text)
The end of the above region should be start + size - 1 instead.
I see this problem in ovmf + Fedora 19 grub boot:
text start: 1000000 md start: 800000 md size: 800000
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Tested-by: Toshi Kani <toshi.kani@hp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Kexec kernel will use saved runtime virtual mapping, so add a new
function efi_map_region_fixed() for directly mapping a md to md->virt.
The md is passed in from 1st kernel, the virtual addr is saved in
md->virt_addr.
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Borislav Petkov <bp@suse.de>
Tested-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
variables size and end is useless in this function, thus remove them.
Reported-by: Toshi Kani <toshi.kani@hp.com>
Tested-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Dave Young <dyoung@redhat.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Currently SCI is employed to handle corrected errors - memory corrected
errors, more specifically but in fact SCI still can be used to handle
any errors, e.g. uncorrected or even fatal ones if enabled by the BIOS.
Enable logging for those kinds of errors too.
Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/1385363701-12387-1-git-send-email-gong.chen@linux.intel.com
[ Boris: massage commit message, rename function arg. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Both x32 and x86-64 use the same stat system call interface. But x32
long is 32-bit. This patch changes x86 uapi <asm/stat.h> to use
__kernel_long_t/__kernel_ulong_t in x86-64 stat.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Link: http://lkml.kernel.org/r/CAMe9rOquPtWEro0GQ=Z95pZJ=c7GGkSHynjN4FbiB4p445x-Ng@mail.gmail.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
It is possible for __direct_map to be called on invalid root_hpa
(-1), two examples:
1) try_async_pf -> can_do_async_pf
-> vmx_interrupt_allowed -> nested_vmx_vmexit
2) vmx_handle_exit -> vmx_interrupt_allowed -> nested_vmx_vmexit
Then to load_vmcs12_host_state and kvm_mmu_reset_context.
Check for this possibility, let fault exception be regenerated.
BZ: https://bugzilla.redhat.com/show_bug.cgi?id=924916
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If kvm_get_dr or kvm_set_dr reports that it raised a fault, we must not
advance the instruction pointer. Otherwise the exception will hit the
wrong instruction.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have added AVX and AVX2 routines that optimize AESNI-GCM encode/decode.
These routines are optimized for encrypt and decrypt of large buffers.
In tests we have seen up to 6% speedup for 1K, 11% speedup for 2K and
18% speedup for 8K buffer over the existing SSE version. These routines
should provide even better speedup for future Intel x86_64 cpus.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace remaining occurences (just as we did in crypto/) under arch/*/crypto/
that make use of memcmp() for comparing keys or authentication tags for
usage with crypto_memneq(). It can simply be used as a drop-in replacement
for the normal memcmp().
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: James Yonan <james@openvpn.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of duplicating the CC_STACKPROTECTOR Kconfig and
Makefile logic in each architecture, switch to using
HAVE_CC_STACKPROTECTOR and keep everything in one place. This
retains the x86-specific bug verification scripts.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@linux-mips.org
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/1387481759-14535-2-git-send-email-keescook@chromium.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
For consistency with mwait_idle_with_hints(). Not sure they help, but
they really won't hurt...
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Len Brown <len.brown@intel.com>
Link: http://lkml.kernel.org/r/CA%2B55aFzGxcML7j8CEvQPYzh0W81uVoAAVmGctMOUZ7CZ1yYd2A@mail.gmail.com
Use static_cpu_has() to conditionalize the CLFLUSH workaround, and add
memory barriers around it since the documentation is explicit that
CLFLUSH is only ordered with respect to MFENCE.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Len Brown <len.brown@intel.com>
Link: http://lkml.kernel.org/r/CA%2B55aFzGxcML7j8CEvQPYzh0W81uVoAAVmGctMOUZ7CZ1yYd2A@mail.gmail.com
People seem to delight in writing wrong and broken mwait idle routines;
collapse the lot.
This leaves mwait_play_dead() the sole remaining user of __mwait() and
new __mwait() users are probably doing it wrong.
Also remove __sti_mwait() as its unused.
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Jacob Jun Pan <jacob.jun.pan@linux.intel.com>
Cc: Mike Galbraith <bitbucket@online.de>
Cc: Len Brown <lenb@kernel.org>
Cc: Rui Zhang <rui.zhang@intel.com>
Acked-by: Rafael Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131212141654.616820819@infradead.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Linux 3.10 changed the timing of how thread_info->flags is touched:
x86: Use generic idle loop
(7d1a941731)
This caused Intel NHM-EX and WSM-EX servers to experience a large number
of immediate MONITOR/MWAIT break wakeups, which caused cpuidle to demote
from deep C-states to shallow C-states, which caused these platforms
to experience a significant increase in idle power.
Note that this issue was already present before the commit above,
however, it wasn't seen often enough to be noticed in power measurements.
Here we extend an errata workaround from the Core2 EX "Dunnington"
to extend to NHM-EX and WSM-EX, to prevent these immediate
returns from MWAIT, reducing idle power on these platforms.
While only acpi_idle ran on Dunnington, intel_idle
may also run on these two newer systems.
As of today, there are no other models that are known
to need this tweak.
Link: http://lkml.kernel.org/r/CAJvTdK=%2BaNN66mYpCGgbHGCHhYQAKx-vB0kJSWjVpsNb_hOAtQ@mail.gmail.com
Signed-off-by: Len Brown <len.brown@intel.com>
Link: http://lkml.kernel.org/r/baff264285f6e585df757d58b17788feabc68918.1387403066.git.len.brown@intel.com
Cc: <stable@vger.kernel.org> # 3.12.x, 3.11.x, 3.10.x
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
When booting a 32-bit x86 kernel on a NUMA machine, node data
cannot be allocated from local node if the account of memory for
node 0 covers the low memory space entirely:
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x83fffffff]
[ 0.000000] NODE_DATA [mem 0x367ed000-0x367edfff]
[ 0.000000] Initmem setup node 1 [mem 0x840000000-0xfffffffff]
[ 0.000000] Cannot find 4096 bytes in node 1
[ 0.000000] 64664MB HIGHMEM available.
[ 0.000000] 871MB LOWMEM available.
To fix this issue, node data is allowed to be allocated from
other nodes if the memory of local node is still not mapped. The
expected result looks like this:
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x83fffffff]
[ 0.000000] NODE_DATA [mem 0x367ed000-0x367edfff]
[ 0.000000] Initmem setup node 1 [mem 0x840000000-0xfffffffff]
[ 0.000000] NODE_DATA [mem 0x367ec000-0x367ecfff]
[ 0.000000] NODE_DATA(1) on node 0
[ 0.000000] 64664MB HIGHMEM available.
[ 0.000000] 871MB LOWMEM available.
Signed-off-by: Lans Zhang <jia.zhang@windriver.com>
Cc: <andi@firstfloor.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1386303510-18574-1-git-send-email-jia.zhang@windriver.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are a few subtle races, between change_protection_range (used by
mprotect and change_prot_numa) on one side, and NUMA page migration and
compaction on the other side.
The basic race is that there is a time window between when the PTE gets
made non-present (PROT_NONE or NUMA), and the TLB is flushed.
During that time, a CPU may continue writing to the page.
This is fine most of the time, however compaction or the NUMA migration
code may come in, and migrate the page away.
When that happens, the CPU may continue writing, through the cached
translation, to what is no longer the current memory location of the
process.
This only affects x86, which has a somewhat optimistic pte_accessible.
All other architectures appear to be safe, and will either always flush,
or flush whenever there is a valid mapping, even with no permissions
(SPARC).
The basic race looks like this:
CPU A CPU B CPU C
load TLB entry
make entry PTE/PMD_NUMA
fault on entry
read/write old page
start migrating page
change PTE/PMD to new page
read/write old page [*]
flush TLB
reload TLB from new entry
read/write new page
lose data
[*] the old page may belong to a new user at this point!
The obvious fix is to flush remote TLB entries, by making sure that
pte_accessible aware of the fact that PROT_NONE and PROT_NUMA memory may
still be accessible if there is a TLB flush pending for the mm.
This should fix both NUMA migration and compaction.
[mgorman@suse.de: fix build]
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Alex Thorlton <athorlton@sgi.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Base pages are unmapped and flushed from cache and TLB during normal
page migration and replaced with a migration entry that causes any
parallel NUMA hinting fault or gup to block until migration completes.
THP does not unmap pages due to a lack of support for migration entries
at a PMD level. This allows races with get_user_pages and
get_user_pages_fast which commit 3f926ab945 ("mm: Close races between
THP migration and PMD numa clearing") made worse by introducing a
pmd_clear_flush().
This patch forces get_user_page (fast and normal) on a pmd_numa page to
go through the slow get_user_page path where it will serialise against
THP migration and properly account for the NUMA hinting fault. On the
migration side the page table lock is taken for each PTE update.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Alex Thorlton <athorlton@sgi.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The pointer arithmetic in this function was really bizarre, where in
fact all we really wanted was a simple pointer array walk. Use the
much more idiomatic construction for that (*ptr++).
Factor an invariant use of __pa() out of the relocation loop. At
least on 64 bits it seems gcc isn't capable of doing that
automatically.
Change the scope of a couple of variables to make it extra obvious
that they are extremely local temp variables.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-rd908t9c8kvcojdabtmm94mb@git.kernel.org
Conflicts:
drivers/net/ethernet/intel/i40e/i40e_main.c
drivers/net/macvtap.c
Both minor merge hassles, simple overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
It's a pathological case, but still a valid one: If L1 disables APIC
virtualization and also allows L2 to directly write to the APIC page, we
have to forcibly enable APIC virtualization while in L2 if the in-kernel
APIC is in use.
This allows to run the direct interrupt test case in the vmx unit test
without x2APIC.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull scheduler fixes from Ingo Molnar:
"Three fixes for scheduler crashes, each triggers in relatively rare,
hardware environment dependent situations"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Rework sched_fair time accounting
math64: Add mul_u64_u32_shr()
sched: Remove PREEMPT_NEED_RESCHED from generic code
sched: Initialize power_orig for overlapping groups
We introduce a new hashing library that is meant to be used in
the contexts where speed is more important than uniformity of the
hashed values. The hash library leverages architecture specific
implementation to achieve high performance and fall backs to
jhash() for the generic case.
On Intel-based x86 architectures, the library can exploit the crc32l
instruction, part of the Intel SSE4.2 instruction set, if the
instruction is supported by the processor. This implementation
is twice as fast as the jhash() implementation on an i7 processor.
Additional architectures, such as Arm64 provide instructions for
accelerating the computation of CRC, so they could be added as well
in follow-up work.
Signed-off-by: Francesco Fusco <ffusco@redhat.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Thomas Graf <tgraf@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
futex_atomic_cmpxchg_inatomic() is simply the 32-bit implementation of
user_atomic_cmpxchg_inatomic(), which in turn is simply a
generalization of the original code in
futex_atomic_cmpxchg_inatomic().
Use the newly generalized user_atomic_cmpxchg_inatomic() as the futex
implementation, too.
[ hpa: retain the inline in futex.h rather than changing it to a macro ]
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Link: http://lkml.kernel.org/r/1387002303-6620-2-git-send-email-qiaowei.ren@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
This patch adds user_atomic_cmpxchg_inatomic() to use CMPXCHG
instruction against a user space address.
This generalizes the already existing futex_atomic_cmpxchg_inatomic()
so it can be used in other contexts. This will be used in the
upcoming support for Intel MPX (Memory Protection Extensions.)
[ hpa: replaced #ifdef inside a macro with IS_ENABLED() ]
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Link: http://lkml.kernel.org/r/1387002303-6620-1-git-send-email-qiaowei.ren@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
machines are sporting a new extended error logging capability which, if
done properly in the BIOS, makes a corresponding EDAC module redundant,
from Gong Chen.
* PCIe AER tracepoint severity levels fix, from Rui Wang.
* Error path correction for the mce device init, from Levente Kurusa.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=r//I
-----END PGP SIGNATURE-----
Merge tag 'ras_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp into x86/ras
Pull RAS updates from Borislav Petkov:
* Add the functionality to override error reporting agents as some
machines are sporting a new extended error logging capability which, if
done properly in the BIOS, makes a corresponding EDAC module redundant,
from Gong Chen.
* PCIe AER tracepoint severity levels fix, from Rui Wang.
* Error path correction for the mce device init, from Levente Kurusa.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 fixes from Peter Anvin:
"This is a pretty small batch:
The biggest single change is to stop using EFI time services on 32-bit
platforms. This matches our current behavior on 64-bit platforms as
we already had ruled them out there as being too unreliable. Turns
out that affects 32-bit platforms, too.
One NULL pointer fix for SGI UV.
Two minor build fixes, one of which only affects icc and the other
which affects icc and future versions or nonstandard default settings
of gcc"
* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, efi: Don't use (U)EFI time services on 32 bit
x86, build, icc: Remove uninitialized_var() from compiler-intel.h
x86/UV: Fix NULL pointer dereference in uv_flush_tlb_others() if the 'nobau' boot option is used
x86, build: Pass in additional -mno-mmx, -mno-sse options
* pci/yijing-dev_is_pci:
alpha/PCI: Use dev_is_pci() to identify PCI devices
arm/PCI: Use dev_is_pci() to identify PCI devices
arm/PCI: Use dev_is_pci() to identify PCI devices
parisc/PCI: Use dev_is_pci() to identify PCI devices
sparc/PCI: Use dev_is_pci() to identify PCI devices
ia64/PCI: Use dev_is_pci() to identify PCI devices
x86/PCI: Use dev_is_pci() to identify PCI devices
PCI: Use dev_is_pci() to identify PCI devices
Change x86_msi.restore_msi_irqs(struct pci_dev *dev, int irq) to
x86_msi.restore_msi_irqs(struct pci_dev *dev).
restore_msi_irqs() restores multiple MSI-X IRQs, so param 'int irq' is
unneeded. This makes code more consistent between vm and bare metal.
Dom0 MSI-X restore code can also be optimized as XEN only has a hypercall
to restore all MSI-X vectors at one time.
Tested-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Giving proper names to the 0 and 1 was once suggested. But since 0 is
returned to the userspace, giving it another name can introduce extra
confusion. This patch just explains the meanings instead.
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the commit 15ad7146 ("KVM: Use the scheduler preemption notifiers
to make kvm preemptible"), the remaining stuff in this function is a
simple cond_resched() call with an extra need_resched() check which was
there to avoid dropping VCPUs unnecessarily. Now it is meaningless.
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
from Google for reporting them.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=auYv
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Four security fixes for KVM on x86. Thanks to Andrew Honig and Lars
Bull from Google for reporting them"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: fix guest-initiated crash with x2apic (CVE-2013-6376)
KVM: x86: Convert vapic synchronization to _cached functions (CVE-2013-6368)
KVM: x86: Fix potential divide by 0 in lapic (CVE-2013-6367)
KVM: Improve create VCPU parameter (CVE-2013-4587)
A guest can cause a BUG_ON() leading to a host kernel crash.
When the guest writes to the ICR to request an IPI, while in x2apic
mode the following things happen, the destination is read from
ICR2, which is a register that the guest can control.
kvm_irq_delivery_to_apic_fast uses the high 16 bits of ICR2 as the
cluster id. A BUG_ON is triggered, which is a protection against
accessing map->logical_map with an out-of-bounds access and manages
to avoid that anything really unsafe occurs.
The logic in the code is correct from real HW point of view. The problem
is that KVM supports only one cluster with ID 0 in clustered mode, but
the code that has the bug does not take this into account.
Reported-by: Lars Bull <larsbull@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In kvm_lapic_sync_from_vapic and kvm_lapic_sync_to_vapic there is the
potential to corrupt kernel memory if userspace provides an address that
is at the end of a page. This patches concerts those functions to use
kvm_write_guest_cached and kvm_read_guest_cached. It also checks the
vapic_address specified by userspace during ioctl processing and returns
an error to userspace if the address is not a valid GPA.
This is generally not guest triggerable, because the required write is
done by firmware that runs before the guest. Also, it only affects AMD
processors and oldish Intel that do not have the FlexPriority feature
(unless you disable FlexPriority, of course; then newer processors are
also affected).
Fixes: b93463aa59 ('KVM: Accelerated apic support')
Reported-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Under guest controllable circumstances apic_get_tmcct will execute a
divide by zero and cause a crash. If the guest cpuid support
tsc deadline timers and performs the following sequence of requests
the host will crash.
- Set the mode to periodic
- Set the TMICT to 0
- Set the mode bits to 11 (neither periodic, nor one shot, nor tsc deadline)
- Set the TMICT to non-zero.
Then the lapic_timer.period will be 0, but the TMICT will not be. If the
guest then reads from the TMCCT then the host will perform a divide by 0.
This patch ensures that if the lapic_timer.period is 0, then the division
does not occur.
Reported-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
So I was reading the exception handler generation code and got a real
headache looking at the unstructured mess that our DO_ERROR*()
generation code is today.
Make it more readable.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: http://lkml.kernel.org/n/tip-kuabysiykvUJpgus35lhnhvs@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We can easily emulate the HLT activity state for L1: If it decides that
L2 shall be halted on entry, just invoke the normal emulation of halt
after switching to L2. We do not depend on specific host features to
provide this, so we can expose the capability unconditionally.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VM_(ENTRY|EXIT)_CONTROLS vmcs fields are read/written on each guest
entry but most times it can be avoided since values do not changes.
Keep fields copy in memory to avoid unnecessary reads from vmcs.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce mul_u64_u32_shr() as proposed by Andy a while back; it
allows using 64x64->128 muls on 64bit archs and recent GCC
which defines __SIZEOF_INT128__ and __int128.
(This new method will be used by the scheduler.)
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: fweisbec@gmail.com
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-hxjoeuzmrcaumR0uZwjpe2pv@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While hunting a preemption issue with Alexander, Ben noticed that the
currently generic PREEMPT_NEED_RESCHED stuff is horribly broken for
load-store architectures.
We currently rely on the IPI to fold TIF_NEED_RESCHED into
PREEMPT_NEED_RESCHED, but when this IPI lands while we already have
a load for the preempt-count but before the store, the store will erase
the PREEMPT_NEED_RESCHED change.
The current preempt-count only works on load-store archs because
interrupts are assumed to be completely balanced wrt their preempt_count
fiddling; the previous preempt_count load will match the preempt_count
state after the interrupt and therefore nothing gets lost.
This patch removes the PREEMPT_NEED_RESCHED usage from generic code and
pushes it into x86 arch code; the generic code goes back to relying on
TIF_NEED_RESCHED.
Boot tested on x86_64 and compile tested on ppc64.
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reported-and-Tested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20131128132641.GP10022@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
UEFI time services are often broken once we're in virtual mode. We were
already refusing to use them on 64-bit systems, but it turns out that
they're also broken on some 32-bit firmware, including the Dell Venue.
Disable them for now, we can revisit once we have the 1:1 mappings code
incorporated.
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Link: http://lkml.kernel.org/r/1385754283-2464-1-git-send-email-matthew.garrett@nebula.com
Cc: <stable@vger.kernel.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
a8b1474442 ("sysfs: give different locking key to regular and bin
files") in driver-core-linus modifies sysfs_open_file() so that it
gives out different locking classes to sysfs_open_files depending on
whether the file is bin or not. Due to the massive kernfs
reorganization in driver-core-next, this naturally causes merge
conflict in fs/sysfs/file.c.
Due to the way things are split between kernfs and sysfs in
driver-core-next, the same fix can't easily be applied to
driver-core-next. This merge simply ignores the offending commit. A
following patch will implement a separate fix for the issue.
Signed-off-by: Tejun Heo <tj@kernel.org>
The SGI UV tlb shootdown code panics the system with a NULL
pointer deference if 'nobau' is specified on the boot
commandline.
uv_flush_tlb_other() gets called for every flush, whether the
BAU is disabled or not. It should not be keeping the s_enters
statistic while the BAU is disabled.
The panic occurs because during initialization
init_per_cpu_tunables() does not set the bcp->statp pointer if
'nobau' was specified.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: <stable@vger.kernel.org> # 3.12.x
Link: http://lkml.kernel.org/r/E1VnzBi-0005yF-MU@eag09.americas.sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In checkin
5551a34e5a x86-64, build: Always pass in -mno-sse
we unconditionally added -mno-sse to the main build, to keep newer
compilers from generating SSE instructions from autovectorization.
However, this did not extend to the special environments
(arch/x86/boot, arch/x86/boot/compressed, and arch/x86/realmode/rm).
Add -mno-sse to the compiler command line for these environments, and
add -mno-mmx to all the environments as well, as we don't want a
compiler to generate MMX code either.
This patch also removes a $(cc-option) call for -m32, since we have
long since stopped supporting compilers too old for the -m32 option,
and in fact hardcode it in other places in the Makefiles.
Reported-by: Kevin B. Smith <kevin.b.smith@intel.com>
Cc: Sunil K. Pandey <sunil.k.pandey@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: H. J. Lu <hjl.tools@gmail.com>
Link: http://lkml.kernel.org/n/tip-j21wzqv790q834n7yc6g80j1@git.kernel.org
Cc: <stable@vger.kernel.org> # build fix only
Use dev_is_pci() instead of checking bus type directly.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use the new helper, request_firmware_direct(), for avoiding the
lengthy timeout of non-existing firmware loads. Especially the Intel
microcode driver suffers from this problem because each CPU triggers
the f/w loading, thus it ends up taking (literally) hours with many
cores.
Tested-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some features, like Intel MPX, work only if the kernel uses eagerfpu
model. So we should force eagerfpu on unless the user has explicitly
disabled it.
Add definitions for Intel MPX and add it to the supported list.
[ hpa: renamed XSTATE_FLEXIBLE to XSTATE_LAZY and added comments ]
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Link: http://lkml.kernel.org/r/9E0BE1322F2F2246BD820DA9FC397ADE014A6115@SHSMSX102.ccr.corp.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The following warnings can be seen in W=1 builds, because the original
sfi_acpi.[ch] header inclusions are incorrect:
include/linux/sfi_acpi.h:72:2: error: implicit declaration of function 'acpi_table_parse' [-Werror=implicit-function-declaration]
drivers/sfi/sfi_acpi.c:154:5: warning: no previous prototype for 'sfi_acpi_table_parse' [-Wmissing-prototypes]
Fix linux/sfi_acpi.h and modify drivers/sfi/sfi_acpi.c accordingly.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[rjw: Subject and changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and
<acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h>
inclusions and remove some inclusions of those files that aren't
necessary.
First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>
should not be included directly from any files that are built for
CONFIG_ACPI unset, because that generally leads to build warnings about
undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set,
<linux/acpi.h> includes those files and for CONFIG_ACPI unset it
provides stub ACPI symbols to be used in that case.
Second, there are ordering dependencies between those files that always
have to be met. Namely, it is required that <acpi/acpi_bus.h> be included
prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the
latter depends on are always there. And <acpi/acpi.h> which provides
basic ACPICA type declarations should always be included prior to any other
ACPI headers in CONFIG_ACPI builds. That also is taken care of including
<linux/acpi.h> as appropriate.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff)
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Define the Intel MPX (Memory Protection Extensions) CPU feature flag
in the cpufeature list.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Link: http://lkml.kernel.org/r/1386375658-2191-2-git-send-email-qiaowei.ren@intel.com
Signed-off-by: Xudong Hao <xudong.hao@intel.com>
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The EVENT_CONSTRAINT_END() macro defines the end marker as
a constraint with a weight of zero. This was all fine
until we blacklisted the corrupting memory events on
Intel IvyBridge. These events are blacklisted by using
a counter bitmask of zero. Thus, they also get a constraint
weight of zero.
The iteration macro: for_each_constraint tests the weight==0.
Therefore, it was stopping at the first blacklisted event, i.e.,
0xd0. The corrupting events were therefore considered as
unconstrained and were scheduled on any of the generic counters.
This patch fixes the end marker to have a weight of -1. With
this, the blacklisted events get an empty constraint and cannot
be scheduled which is what we want for now.
Signed-off-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com>
Reviewed-by: Stephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: ak@linux.intel.com
Cc: jolsa@redhat.com
Cc: zheng.z.yan@intel.com
Link: http://lkml.kernel.org/r/20131204232437.GA10689@starlight
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 and EFI fixes from Peter Anvin:
"Half of these are EFI-related:
The by far biggest change is the change to hold off the deletion of a
sysfs entry while a backend scan is in progress. This is to avoid
calling kmemdup() while under a spinlock.
The other major change is for each entry in the EFI pstore backend to
get a unique identifier, as required by the pstore filesystem proper.
The other changes are:
A fix to the recent consolidation and optimization of using "asm goto"
with read-modify-write operation, which broke the bitops; specifically
in such a way that we could end up generating invalid code.
A build hack to make sure we compile with -mno-sse. icc, and most
likely future versions of gcc, can generate SSE instructions unless we
tell it not to.
A comment-only patch to a change the was due in part to an unpublished
erratum; now when the erratum is published we want to add a comment
explaining why"
* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic, doc: Justification for disabling IO APIC before Local APIC
x86, bitops: Correct the assembly constraints to testing bitops
x86-64, build: Always pass in -mno-sse
efi-pstore: Make efi-pstore return a unique id
x86/efi: Fix earlyprintk off-by-one bug
efivars, efi-pstore: Hold off deletion of sysfs entry until the scan is completed
Since erratum AVR31 in "Intel Atom Processor C2000 Product Family
Specification Update" is now published, I added a justification
comment for disabling IO APIC before Local APIC, as changed in commit:
522e664644 x86/apic: Disable I/O APIC before shutdown of the local APIC
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1386202069-51515-1-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
In checkin:
0c44c2d0f4 x86: Use asm goto to implement better modify_and_test() functions
the various functions which do modify and test were unified and
optimized using "asm goto". However, this change missed the detail
that the bitops require an "Ir" constraint rather than an "er"
constraint ("I" = integer constant from 0-31, "e" = signed 32-bit
integer constant). This would cause code to miscompile if these
functions were used on constant bit positions 32-255 and the build to
fail if used on constant bit positions above 255.
Add the constraints as a parameter to the GEN_BINARY_RMWcc() macro to
avoid this problem.
Reported-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/529E8719.4070202@zytor.com
Always pass in the -mno-sse argument, regardless if
-preferred-stack-boundary is supported. We never want to generate SSE
instructions in the kernel unless we *really* know what we're doing.
According to H. J. Lu, any version of gcc new enough that we support
it at all should handle the -mno-sse option, so just add it
unconditionally.
Reported-by: Kevin B. Smith <kevin.b.smith@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: H. J. Lu <hjl.tools@gmail.com>
Link: http://lkml.kernel.org/n/tip-j21wzqv790q834n7yc6g80j1@git.kernel.org
Cc: <stable@vger.kernel.org> # build fix only
Pull perf fixes from Ingo Molnar:
"Misc kernel and tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools lib traceevent: Fix conversion of pointer to integer of different size
perf/trace: Properly use u64 to hold event_id
perf: Remove fragile swevent hlist optimization
ftrace, perf: Avoid infinite event generation loop
tools lib traceevent: Fix use of multiple options in processing field
perf header: Fix possible memory leaks in process_group_desc()
perf header: Fix bogus group name
perf tools: Tag thread comm as overriden
This patch adds a call to put_device() when the device_register() call
has failed. This is required so that the last reference to the device is
given up.
Signed-off-by: Levente Kurusa <levex@linux.com>
Link: http://lkml.kernel.org/r/5298F900.9000208@linux.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Dave reported seeing the following incorrect output on his Thinkpad T420
when using earlyprintk=efi,
[ 0.000000] efi: EFI v2.00 by Lenovo
ACPI=0xdabfe000 ACPI 2.0=0xdabfe014 SMBIOS=0xdaa9e000
The output should be on one line, not split over two. The cause is an
off-by-one error when checking that the efi_y coordinate hasn't been
incremented out of bounds.
Reported-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
The RAPL PMU counters do not interrupt on overflow.
Therefore, the kernel needs to poll the counters
to avoid missing an overflow. This patch adds
the hrtimer code to do this.
The timer interval is calculated at boot time
based on the power unit used by the HW.
There is one hrtimer per-cpu to handle the case
of multiple simultaneous use across cores on
the same package + hotplug CPU.
Thanks to Maria Dimakopoulou for her contributions
to this patch especially on the math aspects.
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
[ Applied 32-bit build fix. ]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: acme@redhat.com
Cc: jolsa@redhat.com
Cc: zheng.z.yan@intel.com
Cc: bp@alien8.de
Cc: maria.n.dimakopoulou@gmail.com
Link: http://lkml.kernel.org/r/1384275531-10892-5-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch adds a new uncore PMU to expose the Intel
RAPL energy consumption counters. Up to 3 counters,
each counting a particular RAPL event are exposed.
The RAPL counters are available on Intel SandyBridge,
IvyBridge, Haswell. The server skus add a 3rd counter.
The following events are available and exposed in sysfs:
- power/energy-cores: power consumption of all cores on socket
- power/energy-pkg: power consumption of all cores + LLc cache
- power/energy-dram: power consumption of DRAM (servers only)
For each event both the unit (Joules) and scale (2^-32 J)
is exposed in sysfs for use by perf stat and other tools.
The files are:
/sys/devices/power/events/energy-*.unit
/sys/devices/power/events/energy-*.scale
The RAPL PMU is uncore by nature and is implemented such
that it only works in system-wide mode. Measuring only
one CPU per socket is sufficient. The /sys/devices/power/cpumask
file can be used by tools to figure out which CPUs to monitor
by default. For instance, on a 2-socket system, 2 CPUs
(one on each socket) will be shown.
All the counters measure in the same unit (exposed via sysfs).
The perf_events API exposes all RAPL counters as 64-bit integers
counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools
must convert the counts by multiplying them by 2^-32 to obtain
Joules. The reason for this is that the kernel avoids
doing floating point math whenever possible because it is
expensive (user floating-point state must be saved). The method
used avoids kernel floating-point usage. There is no loss of
precision. Thanks to PeterZ for suggesting this approach.
To convert the raw count in Watt:
W = C * 2.3 / (1e10 * time)
or ldexp(C, -32).
RAPL PMU is a new standalone PMU which registers with the
perf_event core subsystem. The PMU type (attr->type) is
dynamically allocated and is available from /sys/device/power/type.
Sampling is not supported by the RAPL PMU. There is no
privilege level filtering either.
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: acme@redhat.com
Cc: jolsa@redhat.com
Cc: zheng.z.yan@intel.com
Cc: bp@alien8.de
Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
groundwork for kexec support on EFI - Borislav Petkov
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)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=w6ff
-----END PGP SIGNATURE-----
Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/efi
Pull EFI virtual mapping changes from Matt Fleming:
* New static EFI runtime services virtual mapping layout which is
groundwork for kexec support on EFI. (Borislav Petkov)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull crypto update from Herbert Xu:
- Made x86 ablk_helper generic for ARM
- Phase out chainiv in favour of eseqiv (affects IPsec)
- Fixed aes-cbc IV corruption on s390
- Added constant-time crypto_memneq which replaces memcmp
- Fixed aes-ctr in omap-aes
- Added OMAP3 ROM RNG support
- Add PRNG support for MSM SoC's
- Add and use Job Ring API in caam
- Misc fixes
[ NOTE! This pull request was sent within the merge window, but Herbert
has some questionable email sending setup that makes him public enemy
#1 as far as gmail is concerned. So most of his emails seem to be
trapped by gmail as spam, resulting in me not seeing them. - Linus ]
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (49 commits)
crypto: s390 - Fix aes-cbc IV corruption
crypto: omap-aes - Fix CTR mode counter length
crypto: omap-sham - Add missing modalias
padata: make the sequence counter an atomic_t
crypto: caam - Modify the interface layers to use JR API's
crypto: caam - Add API's to allocate/free Job Rings
crypto: caam - Add Platform driver for Job Ring
hwrng: msm - Add PRNG support for MSM SoC's
ARM: DT: msm: Add Qualcomm's PRNG driver binding document
crypto: skcipher - Use eseqiv even on UP machines
crypto: talitos - Simplify key parsing
crypto: picoxcell - Simplify and harden key parsing
crypto: ixp4xx - Simplify and harden key parsing
crypto: authencesn - Simplify key parsing
crypto: authenc - Export key parsing helper function
crypto: mv_cesa: remove deprecated IRQF_DISABLED
hwrng: OMAP3 ROM Random Number Generator support
crypto: sha256_ssse3 - also test for BMI2
crypto: mv_cesa - Remove redundant of_match_ptr
crypto: sahara - Remove redundant of_match_ptr
...
Pull DRM fixes from Dave Airlie:
"I was going to leave this until post -rc1 but sysfs fixes broke
hotplug in userspace, so I had to fix it harder, otherwise a set of
pulls from intel, radeon and vmware,
The vmware/ttm changes are bit larger but since its early and they are
unlikely to break anything else I put them in, it lets vmware work
with dri3"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (36 commits)
drm/sysfs: fix hotplug regression since lifetime changes
drm/exynos: g2d: fix memory leak to userptr
drm/i915: Fix gen3 self-refresh watermarks
drm/ttm: Remove set_need_resched from the ttm fault handler
drm/ttm: Don't move non-existing data
drm/radeon: hook up backlight functions for CI and KV family.
drm/i915: Replicate BIOS eDP bpp clamping hack for hsw
drm/i915: Do not enable package C8 on unsupported hardware
drm/i915: Hold pc8 lock around toggling pc8.gpu_idle
drm/i915: encoder->get_config is no longer optional
drm/i915/tv: add ->get_config callback
drm/radeon/cik: Add macrotile mode array query
drm/radeon/cik: Return backend map information to userspace
drm/vmwgfx: Make vmwgfx dma buffers prime aware
drm/vmwgfx: Make surfaces prime-aware
drm/vmwgfx: Hook up the prime ioctls
drm/ttm: Add a minimal prime implementation for ttm base objects
drm/vmwgfx: Fix false lockdep warning
drm/ttm: Allow execbuf util reserves without ticket
drm/i915: restore the early forcewake cleanup
...
There are two code paths how page with pmd page table can be freed:
pmd_free() and pmd_free_tlb().
I've missed the second one and didn't add page table destructor call
there. It leads to leak of page->ptl for pmd page tables, if
dynamically allocated page->ptl is in use.
The patch adds the missed destructor and modifies documentation
accordingly.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Andrey Vagin <avagin@openvz.org>
Tested-by: Andrey Vagin <avagin@openvz.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Just a small pile of fixes for bugs and a few regressions. I'm still
trying to track down a driver load hang on my g33 (which infuriatingly
doesn't happen when loading the module manually after boot), somehow
bisecting loves to go astray on this one :( And there's a (harmless)
locking WARN in the suspend code due to one of Jesse's vlv backlight
rework patches. Otherwise nothing outstanding afaik.
* tag 'drm-intel-fixes-2013-11-20' of git://people.freedesktop.org/~danvet/drm-intel:
drm/i915: Fix gen3 self-refresh watermarks
drm/i915: Replicate BIOS eDP bpp clamping hack for hsw
drm/i915: Do not enable package C8 on unsupported hardware
drm/i915: Hold pc8 lock around toggling pc8.gpu_idle
drm/i915: encoder->get_config is no longer optional
drm/i915/tv: add ->get_config callback
drm/i915: restore the early forcewake cleanup
Partially revert "drm/i915: tune the RC6 threshold for stability"
drm/i915: flush cursors harder
i915: Use 120MHz LVDS SSC clock for gen5/gen6/gen7
x86/early quirk: use gen6 stolen detection for VLV
drm/i915/dp: set sink to power down mode on dp disable
Note that pmds[i] is simply uninitialized at that point...
Granted, it's very hard to hit (you need split page locks *and*
kmalloc(sizeof(spinlock_t), GFP_KERNEL) failing), but the code is
obviously bogus.
Introduced by commit 09ef493985 ("x86: add missed
pgtable_pmd_page_ctor/dtor calls for preallocated pmds")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we are using lea to produce a 32-bit result, we can use the leal
form, rather than using leaq and worry about truncation elsewhere.
Make the leal explicit, both to be more obvious and since that is what
gcc generates and thus is less likely to trigger obscure gas bugs.
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/1384634221-6006-1-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
- ACPI-based device hotplug fixes for issues introduced recently and
a fix for an older error code path bug in the ACPI PCI host bridge
driver.
- Fix for recently broken OMAP cpufreq build from Viresh Kumar.
- Fix for a recent hibernation regression related to s2disk.
- Fix for a locking-related regression in the ACPI EC driver from
Puneet Kumar.
- System suspend error code path fix related to runtime PM and
runtime PM documentation update from Ulf Hansson.
- cpufreq's conservative governor fix from Xiaoguang Chen.
- New processor IDs for intel_idle and turbostat and removal of
an obsolete Kconfig option from Len Brown.
- New device IDs for the ACPI LPSS (Low-Power Subsystem) driver and
ACPI-based PCI hotplug (ACPIPHP) cleanup from Mika Westerberg.
- Removal of several ACPI video DMI blacklist entries that are not
necessary any more from Aaron Lu.
- Rework of the ACPI companion representation in struct device and
code cleanup related to that change from Rafael J Wysocki,
Lan Tianyu and Jarkko Nikula.
- Fixes for assigning names to ACPI-enumerated I2C and SPI devices
from Jarkko Nikula.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=QMp+
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI and power management updates from Rafael Wysocki:
- ACPI-based device hotplug fixes for issues introduced recently and a
fix for an older error code path bug in the ACPI PCI host bridge
driver
- Fix for recently broken OMAP cpufreq build from Viresh Kumar
- Fix for a recent hibernation regression related to s2disk
- Fix for a locking-related regression in the ACPI EC driver from
Puneet Kumar
- System suspend error code path fix related to runtime PM and runtime
PM documentation update from Ulf Hansson
- cpufreq's conservative governor fix from Xiaoguang Chen
- New processor IDs for intel_idle and turbostat and removal of an
obsolete Kconfig option from Len Brown
- New device IDs for the ACPI LPSS (Low-Power Subsystem) driver and
ACPI-based PCI hotplug (ACPIPHP) cleanup from Mika Westerberg
- Removal of several ACPI video DMI blacklist entries that are not
necessary any more from Aaron Lu
- Rework of the ACPI companion representation in struct device and code
cleanup related to that change from Rafael J Wysocki, Lan Tianyu and
Jarkko Nikula
- Fixes for assigning names to ACPI-enumerated I2C and SPI devices from
Jarkko Nikula
* tag 'pm+acpi-2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits)
PCI / hotplug / ACPI: Drop unused acpiphp_debug declaration
ACPI / scan: Set flags.match_driver in acpi_bus_scan_fixed()
ACPI / PCI root: Clear driver_data before failing enumeration
ACPI / hotplug: Fix PCI host bridge hot removal
ACPI / hotplug: Fix acpi_bus_get_device() return value check
cpufreq: governor: Remove fossil comment in the cpufreq_governor_dbs()
ACPI / video: clean up DMI table for initial black screen problem
ACPI / EC: Ensure lock is acquired before accessing ec struct members
PM / Hibernate: Do not crash kernel in free_basic_memory_bitmaps()
ACPI / AC: Remove struct acpi_device pointer from struct acpi_ac
spi: Use stable dev_name for ACPI enumerated SPI slaves
i2c: Use stable dev_name for ACPI enumerated I2C slaves
ACPI: Provide acpi_dev_name accessor for struct acpi_device device name
ACPI / bind: Use (put|get)_device() on ACPI device objects too
ACPI: Eliminate the DEVICE_ACPI_HANDLE() macro
ACPI / driver core: Store an ACPI device pointer in struct acpi_dev_node
cpufreq: OMAP: Fix compilation error 'r & ret undeclared'
PM / Runtime: Fix error path for prepare
PM / Runtime: Update documentation around probe|remove|suspend
cpufreq: conservative: set requested_freq to policy max when it is over policy max
...
We should not be using jump labels before they were initialized. Push back
the callback to until after jump label initialization.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Pull UML changes from Richard Weinberger:
"This pile contains a nice defconfig cleanup, a rewritten stack
unwinder and various cleanups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Remove unused declarations from <as-layout.h>
um: remove used STDIO_CONSOLE Kconfig param
um/vdso: add .gitignore for a couple of targets
arch/um: make it work with defconfig and x86_64
um: Make kstack_depth_to_print conform to arch/x86
um: Get rid of thread_struct->saved_task
um: Make stack trace reliable against kernel mode faults
um: Rewrite show_stack()
Pull x86 fix from Ingo Molnar:
"A modular build fix for certain .config's"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Export 'boot_cpu_physical_apicid' to modules
Pull irq cleanups from Ingo Molnar:
"This is a multi-arch cleanup series from Thomas Gleixner, which we
kept to near the end of the merge window, to not interfere with
architecture updates.
This series (motivated by the -rt kernel) unifies more aspects of IRQ
handling and generalizes PREEMPT_ACTIVE"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
preempt: Make PREEMPT_ACTIVE generic
sparc: Use preempt_schedule_irq
ia64: Use preempt_schedule_irq
m32r: Use preempt_schedule_irq
hardirq: Make hardirq bits generic
m68k: Simplify low level interrupt handling code
genirq: Prevent spurious detection for unconditionally polled interrupts
Vince's perf-trinity fuzzer found yet another 'interesting' problem.
When we sample the irq_work_exit tracepoint with period==1 (or
PERF_SAMPLE_PERIOD) and we add an fasync SIGNAL handler we create an
infinite event generation loop:
,-> <IPI>
| irq_work_exit() ->
| trace_irq_work_exit() ->
| ...
| __perf_event_overflow() -> (due to fasync)
| irq_work_queue() -> (irq_work_list must be empty)
'--------- arch_irq_work_raise()
Similar things can happen due to regular poll() wakeups if we exceed
the ring-buffer wakeup watermark, or have an event_limit.
To avoid this, dis-allow sampling this particular tracepoint.
In order to achieve this, create a special perf_perm function pointer
for each event and call this (when set) on trying to create a
tracepoint perf event.
[ roasted: use expr... to allow for ',' in your expression ]
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Dave Jones <davej@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20131114152304.GC5364@laptop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Matthew noticed that hugetlb mappings don't participate in ASLR on x86-64:
% for i in `seq 3`; do
> tools/testing/selftests/vm/map_hugetlb | grep address
> done
Returned address is 0x2aaaaac00000
Returned address is 0x2aaaaac00000
Returned address is 0x2aaaaac00000
/proc/PID/maps entries for the mapping are always the same
(except inode number):
2aaaaac00000-2aaabac00000 rw-p 00000000 00:0c 8200 /anon_hugepage (deleted)
2aaaaac00000-2aaabac00000 rw-p 00000000 00:0c 256 /anon_hugepage (deleted)
2aaaaac00000-2aaabac00000 rw-p 00000000 00:0c 7180 /anon_hugepage (deleted)
The reason is the generic hugetlb_get_unmapped_area() function
which is used on x86-64. It doesn't support randomization and
use bottom-up unmapped area lookup, instead of usual top-down
on x86-64.
x86 has arch-specific hugetlb_get_unmapped_area(), but it's used
only on x86-32.
Let's use arch-specific hugetlb_get_unmapped_area() on x86-64
too. That adds ASLR and switches hugetlb mappings to use top-down
unmapped area lookup:
% for i in `seq 3`; do
> tools/testing/selftests/vm/map_hugetlb | grep address
> done
Returned address is 0x7f4f08a00000
Returned address is 0x7fdda4200000
Returned address is 0x7febe0000000
/proc/PID/maps entries:
7f4f08a00000-7f4f18a00000 rw-p 00000000 00:0c 1168 /anon_hugepage (deleted)
7fdda4200000-7fddb4200000 rw-p 00000000 00:0c 7092 /anon_hugepage (deleted)
7febe0000000-7febf0000000 rw-p 00000000 00:0c 7183 /anon_hugepage (deleted)
Unmapped area lookup policy for hugetlb mappings is consistent
with normal mappings now -- the only difference is alignment
requirements for huge pages.
libhugetlbfs test-suite didn't detect any regressions with the
patch applied (although it shows few failures on my machine
regardless the patch).
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mel Gorman <mgorman@suse.de>
Link: http://lkml.kernel.org/r/20131119131750.EA45CE0090@blue.fi.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use unified pte_bitop() helper to manipulate bits in pte/pgoff
bitfields and convert pte_to_pgoff()/pgoff_to_pte() to inlines.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
arch/um/defconfig only lists one default configuration, and that applies
only to the i386 architecture. Replace it with two minimal
configuration files generated using `make savedefconfig`:
i386_defconfig and x86_64_defconfig
The build scripts now require two updates:
1. um's Kconfig (arch/x86/um/Kconfig) should specify an ARCH_DEFCONFIG
section explicitly pointing to these scripts if the required
variables are set. Take care to remove the DEFCONFIG_LIST section
defined in the included file arch/um/Kconfig.common.
2. um's Makefile (arch/um/Makefile) should set KBUILD_DEFCONFIG properly
for the top-level Makefile to pick up. Copy the logic in
arch/x86/Makefile to properly pick the defconfig file depending on
the actual architecture; except we're working with $SUBARCH here,
instead of $ARCH.
Now, you can do:
$ ARCH=um make defconfig
$ ARCH=um make
and successfully build User-Mode Linux on an x86_64 box in default
configuration.
Cc: Richard Weinberger <richard@nod.at>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Currently on UML stack traces are not very reliable and both
x86 and x86_64 have their on implementations.
This patch unifies both and adds support to outline unreliable
functions calls.
Signed-off-by: Richard Weinberger <richard@nod.at>
Operation of rep movsb instruction handles zero byte copy. As pointed out by
Linus, there is no need to check zero size in kernel. Removing this redundant
check saves a few cycles in copy user functions.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1384634221-6006-1-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The only real feature that was added this release is from Namhyung Kim,
who introduced "set_graph_notrace" filter that lets you run the function
graph tracer and not trace particular functions and their call chain.
Tom Zanussi added some updates to the ftrace multibuffer tracing that
made it more consistent with the top level tracing.
One of the fixes for perf function tracing required an API change in
RCU; the addition of "rcu_is_watching()". As Paul McKenney is pushing
that change in this release too, he gave me a branch that included
all the changes to get that working, and I pulled that into my tree
in order to complete the perf function tracing fix.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQEcBAABAgAGBQJSgX5SAAoJEKQekfcNnQGulUAH/jORqJrKaNAulmZ314VsAqfa
zMtF5UAAPf7kqc3AN/jtFrhJUNEfxWOo7A4r0FsM/rKdWJF+98GA6aqYVD+XoWFt
+36fg1enxbXUjixQ96Uh+o1+BJUgYDqljuWzqSu/oiXWfWwl8+WL4kcbhb+V9WcF
SpdzLCWVZRfhyDiN3+0zvyQ8RSG2Pd7CWn9zroI0e4sxGo0Ki6JUnIcXtZGOBDOQ
IIZdjXvGSfpJ+3u3XvRPXJcltRCtOsVWxYzrmvRlmHDW5QMe1+WmmrlojTePrLaJ
xn8+3WINqetAR+ZQnazbpt1XzJzKa8QtFgpiN0kT6qL7cg3N1Owc4vLGohl7wok=
=Nesf
-----END PGP SIGNATURE-----
Merge tag 'trace-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing update from Steven Rostedt:
"This batch of changes is mostly clean ups and small bug fixes. The
only real feature that was added this release is from Namhyung Kim,
who introduced "set_graph_notrace" filter that lets you run the
function graph tracer and not trace particular functions and their
call chain.
Tom Zanussi added some updates to the ftrace multibuffer tracing that
made it more consistent with the top level tracing.
One of the fixes for perf function tracing required an API change in
RCU; the addition of "rcu_is_watching()". As Paul McKenney is pushing
that change in this release too, he gave me a branch that included all
the changes to get that working, and I pulled that into my tree in
order to complete the perf function tracing fix"
* tag 'trace-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Add rcu annotation for syscall trace descriptors
tracing: Do not use signed enums with unsigned long long in fgragh output
tracing: Remove unused function ftrace_off_permanent()
tracing: Do not assign filp->private_data to freed memory
tracing: Add helper function tracing_is_disabled()
tracing: Open tracer when ftrace_dump_on_oops is used
tracing: Add support for SOFT_DISABLE to syscall events
tracing: Make register/unregister_ftrace_command __init
tracing: Update event filters for multibuffer
recordmcount.pl: Add support for __fentry__
ftrace: Have control op function callback only trace when RCU is watching
rcu: Do not trace rcu_is_watching() functions
ftrace/x86: skip over the breakpoint for ftrace caller
trace/trace_stat: use rbtree postorder iteration helper instead of opencoding
ftrace: Add set_graph_notrace filter
ftrace: Narrow down the protected area of graph_lock
ftrace: Introduce struct ftrace_graph_data
ftrace: Get rid of ftrace_graph_filter_enabled
tracing: Fix potential out-of-bounds in trace_get_user()
tracing: Show more exact help information about snapshot
Pull trivial tree updates from Jiri Kosina:
"Usual earth-shaking, news-breaking, rocket science pile from
trivial.git"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits)
doc: usb: Fix typo in Documentation/usb/gadget_configs.txt
doc: add missing files to timers/00-INDEX
timekeeping: Fix some trivial typos in comments
mm: Fix some trivial typos in comments
irq: Fix some trivial typos in comments
NUMA: fix typos in Kconfig help text
mm: update 00-INDEX
doc: Documentation/DMA-attributes.txt fix typo
DRM: comment: `halve' -> `half'
Docs: Kconfig: `devlopers' -> `developers'
doc: typo on word accounting in kprobes.c in mutliple architectures
treewide: fix "usefull" typo
treewide: fix "distingush" typo
mm/Kconfig: Grammar s/an/a/
kexec: Typo s/the/then/
Documentation/kvm: Update cpuid documentation for steal time and pv eoi
treewide: Fix common typo in "identify"
__page_to_pfn: Fix typo in comment
Correct some typos for word frequency
clk: fixed-factor: Fix a trivial typo
...
Commit 9ebddac7ea "ACPI, x86: Fix extended error log driver to depend on
CONFIG_X86_LOCAL_APIC" fixed a build error when CONFIG_X86_LOCAL_APIC was not
selected and !CONFIG_SMP.
However, since CONFIG_ACPI_EXTLOG is tristate, there is a second build error:
ERROR: "boot_cpu_physical_apicid" [drivers/acpi/acpi_extlog.ko] undefined!
The symbol needs to be exported for it to be available.
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Chen Gong <gong.chen@linux.intel.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1311141504080.30112@chino.kir.corp.google.com
[ Changed it to a _GPL() export. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull drm updates from Dave Airlie:
"This is a combo of -next and some -fixes that came in in the
intervening time.
Highlights:
New drivers:
ARM Armada driver for Marvell Armada 510 SOCs
Intel:
Broadwell initial support under a default off switch,
Stereo/3D HDMI mode support
Valleyview improvements
Displayport improvements
Haswell fixes
initial mipi dsi panel support
CRC support for debugging
build with CONFIG_FB=n
Radeon:
enable DPM on a number of GPUs by default
secondary GPU powerdown support
enable HDMI audio by default
Hawaii support
Nouveau:
dynamic pm code infrastructure reworked, does nothing major yet
GK208 modesetting support
MSI fixes, on by default again
PMPEG improvements
pageflipping fixes
GMA500:
minnowboard SDVO support
VMware:
misc fixes
MSM:
prime, plane and rendernodes support
Tegra:
rearchitected to put the drm driver into the drm subsystem.
HDMI and gr2d support for tegra 114 SoC
QXL:
oops fix, and multi-head fixes
DRM core:
sysfs lifetime fixes
client capability ioctl
further cleanups to device midlayer
more vblank timestamp fixes"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (789 commits)
drm/nouveau: do not map evicted vram buffers in nouveau_bo_vma_add
drm/nvc0-/gr: shift wrapping bug in nvc0_grctx_generate_r406800
drm/nouveau/pwr: fix missing mutex unlock in a failure path
drm/nv40/therm: fix slowing down fan when pstate undefined
drm/nv11-: synchronise flips to vblank, unless async flip requested
drm/nvc0-: remove nasty fifo swmthd hack for flip completion method
drm/nv10-: we no longer need to create nvsw object on user channels
drm/nouveau: always queue flips relative to kernel channel activity
drm/nouveau: there is no need to reserve/fence the new fb when flipping
drm/nouveau: when bailing out of a pushbuf ioctl, do not remove previous fence
drm/nouveau: allow nouveau_fence_ref() to be a noop
drm/nvc8/mc: msi rearm is via the nvc0 method
drm/ttm: Fix vma page_prot bit manipulation
drm/vmwgfx: Fix a couple of compile / sparse warnings and errors
drm/vmwgfx: Resource evict fixes
drm/edid: compare actual vrefresh for all modes for quirks
drm: shmob_drm: Convert to clk_prepare/unprepare
drm/nouveau: fix 32-bit build
drm/i915/opregion: fix build error on CONFIG_ACPI=n
Revert "drm/radeon/audio: don't set speaker allocation on DCE4+"
...
side: the HV and emulation flavors can now coexist in a single kernel
is probably the most interesting change from a user point of view.
On the x86 side there are nested virtualization improvements and a
few bugfixes. ARM got transparent huge page support, improved
overcommit, and support for big endian guests.
Finally, there is a new interface to connect KVM with VFIO. This
helps with devices that use NoSnoop PCI transactions, letting the
driver in the guest execute WBINVD instructions. This includes
some nVidia cards on Windows, that fail to start without these
patches and the corresponding userspace changes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=rWNf
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM changes from Paolo Bonzini:
"Here are the 3.13 KVM changes. There was a lot of work on the PPC
side: the HV and emulation flavors can now coexist in a single kernel
is probably the most interesting change from a user point of view.
On the x86 side there are nested virtualization improvements and a few
bugfixes.
ARM got transparent huge page support, improved overcommit, and
support for big endian guests.
Finally, there is a new interface to connect KVM with VFIO. This
helps with devices that use NoSnoop PCI transactions, letting the
driver in the guest execute WBINVD instructions. This includes some
nVidia cards on Windows, that fail to start without these patches and
the corresponding userspace changes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (146 commits)
kvm, vmx: Fix lazy FPU on nested guest
arm/arm64: KVM: PSCI: propagate caller endianness to the incoming vcpu
arm/arm64: KVM: MMIO support for BE guest
kvm, cpuid: Fix sparse warning
kvm: Delete prototype for non-existent function kvm_check_iopl
kvm: Delete prototype for non-existent function complete_pio
hung_task: add method to reset detector
pvclock: detect watchdog reset at pvclock read
kvm: optimize out smp_mb after srcu_read_unlock
srcu: API for barrier after srcu read unlock
KVM: remove vm mmap method
KVM: IOMMU: hva align mapping page size
KVM: x86: trace cpuid emulation when called from emulator
KVM: emulator: cleanup decode_register_operand() a bit
KVM: emulator: check rex prefix inside decode_register()
KVM: x86: fix emulation of "movzbl %bpl, %eax"
kvm_host: typo fix
KVM: x86: emulate SAHF instruction
MAINTAINERS: add tree for kvm.git
Documentation/kvm: add a 00-INDEX file
...
- SWIOTLB has tracing added when doing bounce buffer.
- Xen ARM/ARM64 can use Xen-SWIOTLB. This work allows Linux to
safely program real devices for DMA operations when running as
a guest on Xen on ARM, without IOMMU support.*1
- xen_raw_printk works with PVHVM guests if needed.
Bug-fixes:
- Make memory ballooning work under HVM with large MMIO region.
- Inform hypervisor of MCFG regions found in ACPI DSDT.
- Remove deprecated IRQF_DISABLED.
- Remove deprecated __cpuinit.
[*1]:
"On arm and arm64 all Xen guests, including dom0, run with second stage
translation enabled. As a consequence when dom0 programs a device for a
DMA operation is going to use (pseudo) physical addresses instead
machine addresses. This work introduces two trees to track physical to
machine and machine to physical mappings of foreign pages. Local pages
are assumed mapped 1:1 (physical address == machine address). It
enables the SWIOTLB-Xen driver on ARM and ARM64, so that Linux can
translate physical addresses to machine addresses for dma operations
when necessary. " (Stefano).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSgS86AAoJEFjIrFwIi8fJpY4H/R2gke1A1p9UvTwbkaDhgPs/
u/mkI6aH+ktgvu5QZNprki660uydtc4Ck7y8leeLGYw+ed1Ys559SJhRc/x8jBYZ
Hh2chnplld0LAjSpdIDTTePArE1xBo4Gz+fT0zc5cVh0leJwOXn92Kx8N5AWD/T3
gwH4Ok4K1dzZBIls7imM2AM/L1xcApcx3Dl/QpNcoePQtR4yLuPWMUbb3LM8pbUY
0B6ZVN4GOhtJ84z8HRKnh4uMnBYmhmky6laTlHVa6L+j1fv7aAPCdNbePjIt/Pvj
HVYB1O/ht73yHw0zGfK6lhoGG8zlu+Q7sgiut9UsGZZfh34+BRKzNTypqJ3ezQo=
=xc43
-----END PGP SIGNATURE-----
Merge tag 'stable/for-linus-3.13-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull Xen updates from Konrad Rzeszutek Wilk:
"This has tons of fixes and two major features which are concentrated
around the Xen SWIOTLB library.
The short <blurb> is that the tracing facility (just one function) has
been added to SWIOTLB to make it easier to track I/O progress.
Additionally under Xen and ARM (32 & 64) the Xen-SWIOTLB driver
"is used to translate physical to machine and machine to physical
addresses of foreign[guest] pages for DMA operations" (Stefano) when
booting under hardware without proper IOMMU.
There are also bug-fixes, cleanups, compile warning fixes, etc.
The commit times for some of the commits is a bit fresh - that is b/c
we wanted to make sure we have the Ack's from the ARM folks - which
with the string of back-to-back conferences took a bit of time. Rest
assured - the code has been stewing in #linux-next for some time.
Features:
- SWIOTLB has tracing added when doing bounce buffer.
- Xen ARM/ARM64 can use Xen-SWIOTLB. This work allows Linux to
safely program real devices for DMA operations when running as a
guest on Xen on ARM, without IOMMU support. [*1]
- xen_raw_printk works with PVHVM guests if needed.
Bug-fixes:
- Make memory ballooning work under HVM with large MMIO region.
- Inform hypervisor of MCFG regions found in ACPI DSDT.
- Remove deprecated IRQF_DISABLED.
- Remove deprecated __cpuinit.
[*1]:
"On arm and arm64 all Xen guests, including dom0, run with second
stage translation enabled. As a consequence when dom0 programs a
device for a DMA operation is going to use (pseudo) physical
addresses instead machine addresses. This work introduces two trees
to track physical to machine and machine to physical mappings of
foreign pages. Local pages are assumed mapped 1:1 (physical address
== machine address). It enables the SWIOTLB-Xen driver on ARM and
ARM64, so that Linux can translate physical addresses to machine
addresses for dma operations when necessary. " (Stefano)"
* tag 'stable/for-linus-3.13-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (32 commits)
xen/arm: pfn_to_mfn and mfn_to_pfn return the argument if nothing is in the p2m
arm,arm64/include/asm/io.h: define struct bio_vec
swiotlb-xen: missing include dma-direction.h
pci-swiotlb-xen: call pci_request_acs only ifdef CONFIG_PCI
arm: make SWIOTLB available
xen: delete new instances of added __cpuinit
xen/balloon: Set balloon's initial state to number of existing RAM pages
xen/mcfg: Call PHYSDEVOP_pci_mmcfg_reserved for MCFG areas.
xen: remove deprecated IRQF_DISABLED
x86/xen: remove deprecated IRQF_DISABLED
swiotlb-xen: fix error code returned by xen_swiotlb_map_sg_attrs
swiotlb-xen: static inline xen_phys_to_bus, xen_bus_to_phys, xen_virt_to_bus and range_straddles_page_boundary
grant-table: call set_phys_to_machine after mapping grant refs
arm,arm64: do not always merge biovec if we are running on Xen
swiotlb: print a warning when the swiotlb is full
swiotlb-xen: use xen_dma_map/unmap_page, xen_dma_sync_single_for_cpu/device
xen: introduce xen_dma_map/unmap_page and xen_dma_sync_single_for_cpu/device
tracing/events: Fix swiotlb tracepoint creation
swiotlb-xen: use xen_alloc/free_coherent_pages
xen: introduce xen_alloc/free_coherent_pages
...
We've switched over every architecture that supports SMP to it, so
remove the new useless config variable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If split page table lock is in use, we embed the lock into struct page
of table's page. We have to disable split lock, if spinlock_t is too
big be to be embedded, like when DEBUG_SPINLOCK or DEBUG_LOCK_ALLOC
enabled.
This patch add support for dynamic allocation of split page table lock
if we can't embed it to struct page.
page->ptl is unsigned long now and we use it as spinlock_t if
sizeof(spinlock_t) <= sizeof(long), otherwise it's pointer to spinlock_t.
The spinlock_t allocated in pgtable_page_ctor() for PTE table and in
pgtable_pmd_page_ctor() for PMD table. All other helpers converted to
support dynamically allocated page->ptl.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
