The function crypto_sep_dump_message don't have any use in this driver. So remove it.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changed a call to strict_strtoul() into kstrtou8() in
pod_set_midi_postprocess().
Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changed strict_strtoul() to kstrtou() in pod_set_channel() to take changes in
pod_send_channel() into account.
Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Exchanged call to strict_strtoul() with kstrtou8() in pod_resolve().
Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Exchange strict_strtoul() with kstrtou8() and make "value" a u8 instead of a
unsigned long. This is also needed for the changed
line6_pod_transmit_parameter().
Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adjusted interface of pod_send_channel() in order to take changes of
line6_send_program() into account.
Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adjusted interface of line6_send_program() to clarify internal working
Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adjusted interface of line6_pod_transmit_parameter() to take changes of
line6_transmit_parameter() into account
Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adjusted strict_strtoul calls to kstrtou8 in order to take the changes of
line6_transmit_parameter() into account.
Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The style of most kernel code is that there is 1 *space* between the
type of a variable and its name. This patch enforces that in
drivers/staging/vt6656/int.c .
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When assigning a void* to a variable <of some other type>, the value
is cast implicitly - there's no need for explicit cast.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A small comment at the end of the line, mentioning the debug level, is
enough - no need to repeat the entire line of code just for that.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We use tabs for indentation and once space between variable types and
variable name.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch erases hardcode cast between smtcfb_info and fb_info in order
to get a more robust and less rigid smtcfb_info structure. fb_info
doesn't need to be the first field in smtcfb_info after this patch.
Tested with SM712.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes CamelCase var names in smtcfb_info holding device and
revision identifiers.
Tested with SM712.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Our convention is one (statement and) variable per line. Enforce
this in drivers/staging/echo/echo.[ch] .
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The first digital i/o subdevice has its n_chan set to S626_DIO_CHANNELS
which is defined as 48. This is actually the total number of channels
provided by all three digital i/o subdevices. Each subdevice only has
16 channels.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the cut-and-paste comments from the skel driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'devpriv' macro relies on a local variable having a specific
name and yields a pointer derived from that local variable. Replace
the macro with a local variable where used.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Like most of the comedi drivers, this one appears to have been started
based on the skel driver. Cut-and-paste from that driver has resulted
in an unnecessarily complex boardinfo struct.
Remove everything from the boardinfo struct, except the 'name', and
just use the open coded values in the attach function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macro is just a wrapper for outb(). Just use the outb() directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macro is just a wrapper for inb(). Just use the inb() directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the dmm32at_ns_to_timer() and dmm32at_setaitimer() functions
to remove the need for the remaining forward declarations.
Also, make dmm32at_setaitimer() static, it's only referenced in
this file.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the attach/detach functions as well as the boardinfo variable
to remove the need to most of the forward declarations.
Add some whitespace to the boardinfo during the move.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert driver to use the module_comedi_driver() macro to remove
some of the boilerplate.
Move the comedi_driver variable to the end of the file to keep it
with the module_comedi_driver() macro. This also removes the need
for some of the forward declarations. While moving the variable:
1) strip out the unnecessary cut-and-paste skel driver comments
2) add whitespace to improve the readability
3) rename the variable from driver* to *driver
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'thisboard' macro relies on a local variable having a specific
name and yields a pointer derived from that local variable. Replace
the macro with a local variable where used. Use the comedi_board()
helper to get the pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the comedi_driver variable to remove the need for the
forward declarations. Add some whitespace to the declaration
for aesthetic reasons.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the pcmcia_disable_device() call where needed in the pcmcia
probe/remove and delete the das08_pcmcia_release() function.
Move the logic of the das08_pcmcia_config() directly into the
probe function and properly return an error code when the config
fails.
Only set cur_dev, used by the comedi_driver, if the pcmcia probe
is successful. Also, make sure to NULL it in the remove.
Remove all the kernel messages in the pcmcia support code. They
are just added noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pcmcia device-specific data is no longer needed by this driver.
Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pcmcia support code in this driver is cut-and-paste from the
dummy_cs.c driver of the Linux PCMCIA Card Services package. It
has code in it to stop the device during suspend but nothing in
the main comedi_driver uses it.
Remove the 'stop' variable from the pcmcia private data and all
the logic that deals with it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor the pcmcia support code to remove the need for the
forward declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the comment about the PCMCIA support and reword it a bit
because of the move.
Remove a number of useless comments.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, add some whitespace to the declaration
of the pcmcia_driver and reorder it a bit.
Also, the symbol 'das08_cs_driver' is only referenced in this file,
make it static. This quiets the following sparse warning:
warning: symbol 'das08_cs_driver' was not declared. Should it be static?
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As done with the other comedi driver types, register the
comedi_driver first then the pcmcia_driver. Also, make sure
the pcmcia_driver registration succeeds and unregister the
comedi_driver if it fails.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The register/unregister of the pcmcia driver is done in separate
functions that are called by the module_{init,exit} routines.
Simplify the code a bit by moving the register/unregister into
the module_{init,exit} routines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the MODULE_* declarations to the end of the file.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The i8254_struct now only contains the iobase address used to
read/write the 8254 timer device. Move that variable into the
das08 private data struct and remove the i8254_struct.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the driver is using the 8253 helper functions, remove the
unused variables in the i8254_struct as well as the unused defines
for the 8254 register offsets.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The internal 8254 'channels' count is the same as the comedi
subdevice 'n_chan'. There is no need to keep the internal
count.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The three 8254 timers have a 1:1 relationship to the comedi
channels. The 'logic2phys' usage just makes the driver more
complex.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver initially sets all the cached 'mode' values for the
8254 timers to (I8254_MODE0 | I8254_BINARY). It then sets the
timers to that 'mode'. Configuring the counters with the comedi
INSN_CONFIG_SET_COUNTER_MODE updates the 'mode' and then sets
the timers to the 'mode'. The cached value is never read or
used other than for storage.
Just remove the 'mode' usage as it serves no purpose.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor the 8254 timer support by removing the various functions
that handle the io and consolidating the logic into the initialize,
read, write, and config functions used by the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
