Request to stop DF performance counters is missing the actual write to the
controller register.
Reported-by: Chris Freehill <chris.freehill@amd.com>
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why?]
HSplit should not affect DSC slice count. Can cause improper timings to
be applied for certain modes.
[How?]
No longer change DSC Slice count based on HSplit.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
1. Driver use umachannelnumber to calculate watermarks for stutter.
In asymmetric memory config, the actual bandwidth is less than
dual-channel. The bandwidth should be the same as single-channel.
2. We found single rank dimm need additional delay time for stutter.
[How]
Get information from each DIMM. Treat memory config as a single-channel
for asymmetric memory in bandwidth calculating. Add additional delay
time for single rank dimm.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
DMUB FW send trace event via outbox0 interrupt. Driver will handle it.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
GPINT timeout is causing PSR_STATE_0 to be returned when it shouldn't.
We must guarantee that PSR is fully disabled before doing hw programming
on driver-side.
[How]
Return invalid state if GPINT command times out. Let existing retry
logic send the GPINT until successful.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Some existing DC interfaces are optimized to return a single eDP
link/stream. Refactored those DC interfaces to support multiple eDP.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Useful for testing when setting a max bpc value higher than the default
is required
[How]
Allow for reading/writing of the max_requested_bpc property of the
connector
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Add flag to build infopacket in SDP v1.3 format
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Max.Tseng <Max.Tseng@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently the creation of link encoder objects is tightly coupled to the
creation of link objects. Decoupling link encoder object creation is a
preliminary step in the process of allowing link encoders to be
dynamically assigned to links.
[How]
Add "minimal" link encoder objects which are not associated with any
link until required.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
To process AUX transactions with DMUB using inbox1 and outbox1 mail boxes.
[HOW]
1) Added inbox1 command DMUB_CMD__DP_AUX_ACCESS to issue AUX commands
to DMUB in dc_process_dmub_aux_transfer_async(). DMUB processes AUX cmd
with DCN and sends reply back in an outbox1 message triggering an
outbox1 interrupt to driver.
2) In existing driver implementation, AUX commands are processed
synchronously by configuring DCN reg. But in DMUB AUX, driver sends an
inbox1 message and waits for a conditional variable (CV) which will be
signaled by outbox1 ISR.
3) As the driver holds dal and dc locks while waiting for CV, the outbox1
ISR is registered with noMutexWait set to true, which allows ISR to run
and signal CV. This sets a constraint on ISR to not modify variables
such as dc, dmub, etc.
4) Created dmub_outbox.c with dmub_enable_outbox_notification() to enable
outbox1 mailbox.
5) New mailbox address ranges allocated for outbox1 of size DMUB_RB_SIZE.
Created dmub functions for Outbox1: dmub_dcn20_setup_out_mailbox(),
dmub_dcn20_get_outbox1_wptr() and dmub_dcn20_set_outbox1_rptr().
6) Added functions dc_stat_get_dmub_notification() and
dmub_srv_stat_get_notification() to retrieve Outbox1 message.
7) Currently, DMUB doesn't opens DDC in AUX mode before issuing AUX
transaction. A workaround is added in dce_aux_transfer_dmub_raw() to
open in DDC in AUX mode for every AUX transaction.
8) Added dc debug option enable_dmub_aux_for_legacy_ddc enable/disable
DMUB AUX. This debug option is checked dce_aux_transfer_with_retries()
to select the method to process AUX transactions.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By using the information provided by PMFW when available.
V2: put those structures shared around SMU V11 ASICs in
smu_v11_0.h
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New changes were involved for the SmuMetrics structure.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
miss RAP TA in loop. (when i == 4)
Fix:
drm/amdgpu: add RAP TA version print in amdgpu_firmware_info
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reported-by: Candice Li <candice.li@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following coccicheck warnings:
./drivers/gpu/drm/amd/display/dc/dce/dmub_psr.c:273:16-21: WARNING:
conversion to bool not needed here.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following coccicheck warnings:
./drivers/gpu/drm/amd/pm/swsmu/smu11/sienna_cichlid_ppt.c:924:47-52:
WARNING: conversion to bool not needed here.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the number of badpage records exceed the threshold, driver has
updated both epprom header and control->tbl_hdr.header before gpu reset,
therefore GPU recovery thread no need to read epprom header directly.
v2: merge amdgpu_ras_check_err_threshold into amdgpu_ras_eeprom_check_err_threshold
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
report -ENOTSUPP instead of -EINVAL, so that if userspace
fails to read sensor data can figure it out the failure correctly.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Arcturus has a different register address from other SMU V11
ASICs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add RAP TA version print in amdgpu_firmware_info.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following coccicheck warnings:
./drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp_cm.c:243:67-72:
WARNING: conversion to bool not needed here.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following coccicheck warning:
./drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1589:0-23: WARNING:
fops_ib_preempt should be defined with DEFINE_DEBUGFS_ATTRIBUTE
./drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c:1592:0-23: WARNING:
fops_sclk_set should be defined with DEFINE_DEBUGFS_ATTRIBUTE
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Per discussions with PMFW team, the driver only needs to
notify the PMFW when the RLC is disabled. The RLC FW will notify
the PMFW directly when it's enabled.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Making them an error confuses users and the errors are harmless
as not all asics support all profiles.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1488
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And just use the ioctl index. They are the same.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So mesa can check when to query the kernel vs use hardcoded
codec bandwidth data.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We currently hardcode these in mesa, but querying them from
the kernel makes more sense since there may be board specific
limitations that the kernel driver is better suited to
determining.
Userpace patches that use this interface:
https://gitlab.freedesktop.org/leoliu/drm/-/commits/info_video_capshttps://gitlab.freedesktop.org/leoliu/mesa/-/commits/info_video_caps
v2: reorder the codecs to better align with mesa
v3: add max_pixels_per_frame to handle the portrait case, squash in
memory leak fix
v4: drop extra break
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com> (v2)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For each asic family. Will be used to populate tables
for the new INFO ioctl query.
v2: add max_pixels_per_frame to handle the portrait case
v3: fix copy paste typos
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This will be used by a new INFO ioctl query to fetch the decode
and encode capabilities from the kernel driver rather than
hardcoding them in mesa. This gives us more fine grained control
of capabilities using information that is only availabl in the
kernel (e.g., platform limitations or bandwidth restrictions).
v2: reorder the codecs to better align with mesa
v3: add max_pixels_per_frame to handle the portrait case
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com> (v2)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
A seamless transition between modes can be performed if the new incoming
mode has the same timing parameters as the optimized mode on a display with a
variable vtotal min/max.
Smooth video playback usecases can be enabled with this seamless transition by
switching to a new mode which has a refresh rate matching the video.
[How]
Skip full modeset if userspace requested a compatible freesync mode which only
differs in the front porch timing from the current mode.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
While possible for userspace to create and add custom mode based off the
optimized mode for the connected display which differs only in front porch
timing, this patch set adds a list of common video modes in advance.
The list of common video refresh rates is small, well known and the optimized
mode has specific requirements to be able to enable HW frame doubling and
tripling so it makes most sense to create the modes that video players will need
in advance. The optimized mode matches the preferred mode resolution but has the
highest refresh rate available to enable the largest front porch extension.
[How]
Find the optimized mode and store it on the connector so we can check it
later during our optimized modeset.
Prepopulate the mode list with a list of common video mades based on the
optimized mode (but with a longer front porch) if the panel doesn't support a
variant of the mode natively.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This option shall be opt-in by default since it is a temporary solution
until long term solution is agreed upon which may require userspace interface
changes. This feature give the user a seamless experience when freesync aware
programs (media players for instance) switches to a compatible freesync mode
when playing videos. Enabling this feature also have the potential side effect
of causing higher power consumption due to running a mode with lower resolution
and base clock frequency with the highest base clock supported on the monitor as
per its advertised modes. There has been precedent of manufacturing modes in the
kernel. In AMDGPU, the existing usage are for common modes and scaling modes.
Other driver have a similar approach as well.
[How]
Adds a module parameter to enable freesync video mode modeset
optimization. Enabling this mode allows the driver to skip a full modeset when a
freesync compatible mode is requested by the userspace. This parameter will also
add some additional modes that are within the connected monitor's VRR range
corresponding to common video modes, which media players can use for a seamless
experience while making use of freesync.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently callers have to provide handle of amdgpu_device,
which is not used by the implementation. It is unlikely this
parameter will become useful in future, thus removing it
v2: squash in unused variable fix
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move gpu_reset_counter after drm_sched_stop to avoid race
condition caused by job submitted between reset_count +1 and
drm_sched_stop.
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v3: updated to include new clocks od_vddgfx_offset, od_cclk
Context mismatch with revision v3 to patch 0003
Modified Functions
smu_sys_set_pp_table() - modifed signature to match Powerplay API set_pp_table
smu_force_performance_level() - modifed arg0 to match Powerplay API force_performance_level
smu_od_edit_dpm_table() - modifed arg0 to match Powerplay API odn_edit_dpm_table
Other Changes
smu_od_edit_dpm_table() - removed call to task(READJUST_POWER_STATE) after COMMIT_TABLE,
now handled in calling function
amdgpu_set_power_dpm_force_performance_level() - now checks thermal for swsmu systems before trying to change level
amdgpu_set_pp_od_clk_voltage() - now attempts to set fine_grain_clock_vol before swsmu edit dpm table
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: fix errors and warnings flagged by checkpatch
v3: Context mismatch with revision v3 to patch 0003
New Functions
smu_get_mclk - implementation of the Powerplay API function get_mclk
smu_get_sclk - implementation of the Powerplay API function get_sclk
smu_handle_dpm_task - implementation of the Powerplay API function dispatch_tasks
Modified Functions
smu_dpm_set_power_gate - - modifed arg0 to match Powerplay API set_powergating_by_smu
Other Changes
removed special smu handling in dpm functions and called through Powerplay API
call to smu_dpm_set_power_gate via Powerplay API now locks mutex for UVD and VCE
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v3: updated to include new clocks vclk, dclk, od_vddgfx_offset, od_cclk
Added forward declaration for function smu_force_smuclk_levels to resolve clash with other commits
Resolved context clashes with other commits and v3 updates to patches 0003, 0004
v2: fix errors flagged by checkpatch
New Functions
smu_bump_power_profile_mode() - changes profile mode assuming calling function already has mutex
smu_force_ppclk_levels() - accepts Powerplay enum pp_clock_type to specify clock to change
smu_print_ppclk_levels() - accepts Powerplay enum pp_clock_type to request clock levels
amdgpu_get_pp_dpm_clock() - accepts Powerplay enum pp_clock_type to request clock levels and allows
all the amdgpu_get_pp_dpm_$CLK functions to have a single codepath
amdgpu_set_pp_dpm_clock() - accepts Powerplay enum pp_clock_type to set clock levels and allows
all the amdgpu_set_pp_dpm_$CLK functions to have a single codepath
Modified Functions
smu_force_smuclk_levels - changed function name to make clear difference to smu_force_ppclk_levels
smu_force_ppclk_levels() - modifed signature to implement Powerplay API force_clock_level
- calls smu_force_smuclk_levels
smu_print_smuclk_levels - changed function name to make clear difference to smu_print_ppclk_levels
smu_print_ppclk_levels() - modifed signature to implement Powerplay API force_clock_level
- calls smu_print_smuclk_levels
smu_sys_get_gpu_metrics - modifed arg0 to match Powerplay API get_gpu_metrics
smu_get_power_profile_mode - modifed arg0 to match Powerplay API get_power_profile_mode
smu_set_power_profile_mode - modifed arg0 to match Powerplay API set_power_profile_mode
- removed arg lock_needed, mutex always locked, internal functions
can call smu_bump if they already hold lock
smu_switch_power_profile - now calls smu_bump as already holds mutex lock
smu_adjust_power_state_dynamic - now calls smu_bump as already holds mutex lock
amdgpu_get_pp_od_clk_voltage - uses smu_print_ppclk_levels
amdgpu_{set,get}_pp_dpm_$CLK - replace logic with call helper function amdgpu_{set,get}_pp_dpm_clock()
CLK ={sclk, mclk, socclk, fclk, dcefclk, pci, vclkd, dclk}
Other Changes
added 5 smu Powerplay functions to swsmu_dpm_funcs
removed special smu handling in pm functions and called through Powerplay API
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: add comment to highlight assignment that changes uint32_t value to int
fix errors flagged by checkpatch.pl
New Functions
smu_get_baco_capability() - Implement Powerplay API get_asic_baco_capability
smu_baco_set_state() - Implement Powerplay API set_asic_baco_state
Modified Functions
smu_read_sensor() - modifed signature to match Powerplay API read_sensor
Other Changes
added 3 above smu Powerplay functions to swsmu_dpm_funcs
removed special smu handling in 5 dpm functions and called through Powerplay API
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: remove check for error during swsmu amdgpu_dpm_get_pp_num_states() call to match previous powerplay behaviour
v3: removed smu implementation of powerplay get_power_limit
Resolved context clashes with other commits
Modified Files
smu_set_power_limit() - modifed arg0 to match Powerplay API set_power_limit
smu_sys_get_pp_table() - modifed signature to match Powerplay API get_pp_table
smu_get_power_num_states() - modifed arg0 to match Powerplay API get_pp_num_states
smu_get_current_power_state() - modifed arg0 to match Powerplay API get_current_power_state
smu_sys_get_pp_feature_mask() - modifed signature to match Powerplay API get_ppfeature_status
smu_sys_set_pp_feature_mask() - modifed arg0 to match Powerplay API set_ppfeature_status
Other Changes
added 6 above smu Powerplay functions to swsmu_dpm_funcs
removed special smu handling of above functions and called through Powerplay API
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: changed error return value of smu_get_fan_control_mode to AMD_FAN_CTRL_NONE
fixed type in amdgpu_hwmon_get_pwm1_enable() print statement
fixed indent flagged by checkpatch.pl
Modified Functions
smu_set_fan_speed_rpm() - modifed arg0 to match Powerplay API set_fan_speed_rpm
smu_get_fan_control_mode() - modifed signature to match Powerplay API get_fan_control_mode
smu_set_fan_control_mode() - modifed signature to match Powerplay API set_fan_control_mode
smu_get_fan_speed_percent() - modifed signature to match Powerplay API get_fan_speed_percent
smu_set_fan_speed_percent() - modifed signature to match Powerplay API set_fan_speed_percent
smu_get_fan_speed_rpm() - modifed arg0 to match Powerplay API get_fan_speed_rpm
Other Changes
added 6 above smu fan Powerplay functions to swsmu_dpm_funcs
removed special smu handling of above functions and called through Powerplay API
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Modified Functions
smu_set_xgmi_pstate() - modifed arg0 to match Powerplay API set_xgmi_pstate
smu_mode2_reset() - modifed arg0 to match Powerplay API asic_reset_mode_2
smu_switch_power_profile() - modifed arg0 to match Powerplay API switch_power_profile
smu_set_mp1_state() - modifed arg0 to match Powerplay API set_mp1_state
smu_set_df_cstate() - modifed arg0 to match Powerplay API set_df_cstate
smu_enable_mgpu_fan_boost() - modifed arg0 to match Powerplay API enable_mgpu_fan_boost
Other Changes
added above smu reset Powerplay functions to swsmu_dpm_funcs
removed special smu handling of above functions and called through Powerplay API
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: updated the structure name to swsmu_pm_funcs
Modified Functions
smu_get_performance_level() - modifed arg0 to match Powerplay API get_performance_level
Other Changes
added a new structure swsmu_dpm_funcs to hold smu functions for Powerplay API
removed special smu handling from amdgpu_get_power_dpm_force_performance_level
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The value of max_me in amdgpu_gfx_rlc_setup_cp_table should reduce to 4
when mec2_fw is removed on asic renoir/arcturus. Or it will cause kernel
NULL pointer when modprobe driver.
Signed-off-by: Changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Navi12 0x7360/C7 SKU has no video support, so remove it.
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Asher.Song <Asher.Song@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To ensure user has a constant of VRAM accessible in run-time, driver
reserves limit backup pages when init, and return ones when bad pages
retired, to keep no change of unused memory size.
v2: refine codes to calculate badpags threshold
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following coccicheck warnings:
./drivers/gpu/drm/amd/amdgpu/athub_v2_1.c:79:40-45: WARNING: conversion
to bool not needed here.
./drivers/gpu/drm/amd/amdgpu/athub_v2_1.c:81:40-45: WARNING: conversion
to bool not needed here.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
>> drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9804:38:
>> warning: variable 'i' is uninitialized when used here
>> [-Wuninitialized]
timing = &edid->detailed_timings[i];
^
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:9714:7:
note: initialize the variable 'i' to silence this warning
int i;
^
= 0
1 warning generated.
Initialize the variable 'i'.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Because of dpg, the rptr/wptr need to be saved on fw shared memory,
and restore them back in RBC_RB_RPTR/WPTR in kernel at power up.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch enables ASSR if display declares such support in DPCD.
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
