Commit Graph

767234 Commits

Author SHA1 Message Date
Chris Brandt
628c534ae7 serial: sh-sci: Improve support for separate TEI and DRI interrupts
Some SCIF versions mux error and break interrupts together and then provide
a separate interrupt ID for just TEI/DRI.

Allow all 6 types of interrupts to be specified via platform data (or DT)
and for any signals that are muxed together (have the same interrupt
number) simply register one handler.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-02 10:07:09 +02:00
Chris Brandt
7acece71a5 serial: sh-sci: Remove SCIx_RZ_SCIFA_REGTYPE
There is no more need for SCIx_RZ_SCIFA_REGTYPE now that
SCIx_SH4_SCIF_REGTYPE can provide the same register/address definitions.

Also, R7S9210 no longer needs a special compatible since the standard
"renesas,scif" will work just fine.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-02 10:07:09 +02:00
Chris Brandt
2d4dd0da45 serial: sh-sci: Allow for compressed SCIF address
Some devices with SCIx_SH4_SCIF_REGTYPE have no space between registers.
Use the register area size to determine the spacing between register.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-02 10:07:09 +02:00
Chris Brandt
70a15ff0ed serial: sh-sci: Improve interrupts description
Describe interrupts property in more detail, especially when there are
more than one interrupt.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-02 10:07:09 +02:00
Andy Shevchenko
286d9b8c7d serial: 8250: Use cached port name directly in messages
Since we have port name stored in struct uart_port, we better to use
that one instead of open coding.

This will make it one place source for easier maintenance or
modifications.

While here, replace printk_ratelimited(KERN_INFO ) by pr_info_ratelimited().
It seems last printk() call in 8250_port.c.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25 12:51:23 +02:00
Andy Shevchenko
b340cbbea5 serial: 8250_exar: Drop unused variable in pci_xr17v35x_setup()
After removal has_slave use the variable board becomes unused.
Remove it to avoid a warning:

drivers/tty/serial/8250/8250_exar.c: In function 'pci_xr17v35x_setup':
drivers/tty/serial/8250/8250_exar.c:380:31: warning: unused variable 'board' [-Wunused-variable]
  const struct exar8250_board *board = priv->board;
                               ^~~~~

Fixes: 328c11f24b ("serial: 8250_exar: Remove useless has_slave member")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-23 14:15:49 +02:00
Adam Borowski
f4c6fbc96e vt: drop unused struct vt_struct
Hasn't been ever used within historic (ie, git) times.

Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-21 09:21:10 +02:00
Nicolas Pitre
d541ae4e76 vt: avoid a VLA in the unicode screen scroll function
The nr argument is typically small: most often nr == 1. However this
could be abused with a very large explicit scroll in a resized screen.
Make the code scroll lines by performing an array rotation operation to
avoid the need for a large temporary space.

Requested-by: Kees Cook <keescook@chromium.org>
Suggested-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-21 09:19:46 +02:00
Nicolas Pitre
13aa0a1218 vt: add /dev/vcsu* to devices.txt
Also mention that the traditional devices provide glyph values whereas
/dev/vcsu* is unicode based.

Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-21 09:18:27 +02:00
Nicolas Pitre
0224080fc8 vt: coherence validation code for the unicode screen buffer
Make sure the unicode screen buffer matches the video screen content.
This is provided for debugging convenience and disabled by default.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-21 09:18:27 +02:00
Adam Borowski
9bfdc2611d vt: selection: take screen contents from uniscr if available
This preserves whatever was written even if we can't currently display the
given glyph.  Mouse paste won't corrupt any character of wcwidth() == 1
anymore.

Note that for now uniscr doesn't get allocated until something reads
/dev/vcsuN for that console, making this code dormant for most users.

Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-21 09:18:27 +02:00
Adam Borowski
df155d2d8c vt: selection: handle storing of characters above U+FFFF
Those above U+10FFFF get replaced with U+FFFD.

Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-21 09:18:27 +02:00
Adam Borowski
9ca7f24998 vt: don't reinvent min()
All the helper function saved us was a cast.

Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-21 09:18:27 +02:00
Matthijs van Duin
36ecc1481d pty: fix O_CLOEXEC for TIOCGPTPEER
It was being ignored because the flags were not passed to fd allocation.

Fixes: 54ebbfb160 ("tty: add TIOCGPTPEER ioctl")
Signed-off-by: Matthijs van Duin <matthijsvanduin@gmail.com>
Acked-by: Aleksa Sarai <asarai@suse.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-21 09:08:47 +02:00
Geert Uytterhoeven
3bae8cea04 serial: sh-sci: Document that serial aliases became optional
Serial aliases are optional since commit 7678f4c20f ("serial:
sh-sci: Add support for dynamic instances").
Update the DT bindings to reflect this.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-21 08:40:51 +02:00
Geert Uytterhoeven
ac8a103e69 serial: sh-sci: Drop superfluous assignment in sci_request_dma()
No later code uses the assigned value, so it can be dropped.

Reported-by: Simon Horman <horms@verge.net.au>
Fixes: 2c4ee23530 ("serial: sh-sci: Postpone DMA release when falling back to PIO")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-21 08:40:51 +02:00
Andy Shevchenko
26f22d5748 serial: 8250_exar: Describe all members in struct exar8250_board
Describe all memebers in struct exar8250_board, otherwise we get a warning:

drivers/tty/serial/8250/8250_exar.c:122: warning: Function parameter or member 'has_slave' not described in 'exar8250_board'
drivers/tty/serial/8250/8250_exar.c:122: warning: Function parameter or member 'setup' not described in 'exar8250_board'
drivers/tty/serial/8250/8250_exar.c:122: warning: Function parameter or member 'exit' not described in 'exar8250_board'

No functional change intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-21 08:40:45 +02:00
Andy Shevchenko
328c11f24b serial: 8250_exar: Remove useless has_slave member
Exar UARTs by default supports only up to 8 channels,
all above go as extension. Thus, there is no need to have
an additional property to distinguish them from first ones.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-21 08:40:45 +02:00
Phil Edworthy
2ff5fa7f74 serial: 8250_dw: Add compatible string for Renesas RZ/N1 UART
The Renesas RZ/N1 UART is based on the Synopsys DW UART, but has additional
registers for DMA. This patch does not address the changes required for DMA
support, it simply adds the compatible string.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-21 08:39:25 +02:00
Phil Edworthy
72b0505f08 dt: serial: Add Renesas RZ/N1 binding documentation
The RZ/N1 UART is a modified Synopsys DesignWare UART.
The modifications only relate to DMA so you could actually use the
controller with the Synopsys compatible string if you are not using
DMA, but you should not do so.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-21 08:39:25 +02:00
Geert Uytterhoeven
1481ecf194 serial: sh-sci: Fix use-after-free on subsequent port startup
sci_request_irq() checks port->irqstr[j] for a NULL pointer, to decide
if a fallback interrupt name string should be allocated or not.

While this string is freed during port shutdown, the pointer is not
zeroed.  Hence on a subsequent startup of the port, it will still be
pointing to the freed memory, leading to e.g.

    WARNING: CPU: 0 PID: 404 at fs/proc/generic.c:388 __proc_create+0xbc/0x260
    name len 0

or to a crash (the latter is more likely with CONFIG_DEBUG_SLAB=y, due
to the poisoning of freed memory).

Instead of zeroeing the pointer at multiple places, preinitialize
port->irqstr[j] to zero to fix this.

Fixes: 8b0bbd9562 ("serial: sh-sci: Add support for R7S9210")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-21 08:39:25 +02:00
Johan Hovold
fefe287e4b tty: support CIBAUD without BOTHER
Since commit edc6afc549 ("[PATCH] tty: switch to ktermios and new
framework") arbitrary baud rates can be requested using BOTHER and input
rates can be requested using the termios CIBAUD bits (CBAUD shifted
IBSHIFT bits).

This functionality has been conditionally compiled depending on whether
an architecture defines BOTHER and IBSHIFT respectively, but would in
fact fail to compile unless both symbols were defined due to cross
dependencies.

Relax the IBSHIFT => BOTHER dependency so that an architecture could
theoretically support CIBAUD without the Linux-specific BOTHER, while
hopefully making the current conditional-compilation directives a bit
less confusing.

Note that the long-term goal is still to have all architectures support
both features, so an alternative could just be to have the lot depend on
BOTHER.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16 12:00:43 +02:00
Johan Hovold
1cee38f036 tty: fix termios input-speed encoding when using BOTHER
When the termios CIBAUD bits are left unset (i.e. B0), we use the same
output and input speed and should leave CIBAUD unchanged.

When the user requests a rate using BOTHER and c_ospeed which the driver
cannot set exactly, the driver can report back the actual baud rate
using tty_termios_encode_baud_rate(). If this rate is close enough to a
standard rate however, we could end up setting CIBAUD to a Bfoo value
despite the user having left it unset.

This in turn could lead to an unexpected input rate being set on
subsequent termios updates.

Fix this by using a zero tolerance value also for the input rate when
CIBAUD is clear so that the matching logic works as expected.

Fixes: 78137e3b34 ("[PATCH] tty: improve encode_baud_rate logic")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16 11:58:15 +02:00
Johan Hovold
fada18c48d tty: fix termios input-speed encoding
Make sure to clear the CIBAUD bits before OR-ing the new mask when
encoding the termios input baud rate.

This could otherwise lead to an incorrect input rate being reported back
and incidentally set on subsequent termios updates.

Fixes: edc6afc549 ("[PATCH] tty: switch to ktermios and new framework")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16 11:58:15 +02:00
Girish Mahadevan
8a8a66a1a1 tty: serial: qcom_geni_serial: Add support for flow control
Add support for flow control functionality in the GENI serial driver
and also support for non-console higher baud rate(upto 4Mbps) usecases.

Signed-off-by: Girish Mahadevan <girishm@codeaurora.org>
Signed-off-by: Mohammed Khajapasha <mkhaja@codeaurora.org>
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16 11:56:22 +02:00
Alexander Sverdlin
c58caaab3b serial: 8250: of: Defer probe on missing IRQ
If the IRQ controller is not yet probed do not proceed with irq=0,
try to defer the probe.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16 11:56:22 +02:00
Alexander Sverdlin
b29330d829 serial: 8250: of: Correct of_platform_serial_setup() error handling
Don't dispose IRQ mapping before it has been created.

Fixes: aa9594740 ("serial: 8250_of: Add IO space support")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16 11:56:22 +02:00
Chris Brandt
b819e4aba0 serial: sh-sci: Document r7s9210 bindings
Add R7S9210 (RZ/A2) support

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16 11:56:22 +02:00
Chris Brandt
8b0bbd9562 serial: sh-sci: Add support for R7S9210
Add support for a "RZ_SCIFA" which is different than a traditional
SCIFA. It looks like a normal SCIF with FIFO data, but with a
compressed address space. Also, the break out of interrupts
are different then traditinal SCIF: ERI/BRI, RXI, TXI, TEI, DRI.
The R7S9210 (RZ/A2) contains this type of SCIF.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-16 11:56:22 +02:00
Sean Wang
76d8ca245c serdev: add dev_pm_domain_attach|detach()
In order to open up the required power gate before any operation can be
effectively performed over the serial bus between CPU and serdev, it's
clearly essential to add common attach functions for PM domains to serdev
at the probe phase.

Similarly, the relevant dettach function for the PM domains should be
properly and reversely added at the remove phase.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-serial@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-15 12:23:53 +02:00
Colin Ian King
819abf294a tty: serial: jsm: remove redundant pointer ch
Pointer ch is being assigned but is never used hence it is redundant
and can be removed.

Cleans up clang warning:
warning: variable 'ch' set but not used [-Wunused-but-set-variable]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-13 15:36:32 +02:00
Tycho Andersen
a5ba1d95e4 uart: fix race between uart_put_char() and uart_shutdown()
We have reports of the following crash:

    PID: 7 TASK: ffff88085c6d61c0 CPU: 1 COMMAND: "kworker/u25:0"
     [ffff88085c6db710] machine_kexec at ffffffff81046239
     [ffff88085c6db760] crash_kexec at ffffffff810fc248
     [ffff88085c6db830] oops_end at ffffffff81008ae7
     [ffff88085c6db860] no_context at ffffffff81050b8f
     [ffff88085c6db8b0] __bad_area_nosemaphore at ffffffff81050d75
     [ffff88085c6db900] bad_area_nosemaphore at ffffffff81050e83
     [ffff88085c6db910] __do_page_fault at ffffffff8105132e
     [ffff88085c6db9b0] do_page_fault at ffffffff8105152c
     [ffff88085c6db9c0] page_fault at ffffffff81a3f122
    [exception RIP: uart_put_char+149]
    RIP: ffffffff814b67b5 RSP: ffff88085c6dba78 RFLAGS: 00010006
    RAX: 0000000000000292 RBX: ffffffff827c5120 RCX: 0000000000000081
    RDX: 0000000000000000 RSI: 000000000000005f RDI: ffffffff827c5120
    RBP: ffff88085c6dba98 R8: 000000000000012c R9: ffffffff822ea320
    R10: ffff88085fe4db04 R11: 0000000000000001 R12: ffff881059f9c000
    R13: 0000000000000001 R14: 000000000000005f R15: 0000000000000fba
    ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
     [ffff88085c6dbaa0] tty_put_char at ffffffff81497544
     [ffff88085c6dbac0] do_output_char at ffffffff8149c91c
     [ffff88085c6dbae0] __process_echoes at ffffffff8149cb8b
     [ffff88085c6dbb30] commit_echoes at ffffffff8149cdc2
     [ffff88085c6dbb60] n_tty_receive_buf_fast at ffffffff8149e49b
     [ffff88085c6dbbc0] __receive_buf at ffffffff8149ef5a
     [ffff88085c6dbc20] n_tty_receive_buf_common at ffffffff8149f016
     [ffff88085c6dbca0] n_tty_receive_buf2 at ffffffff8149f194
     [ffff88085c6dbcb0] flush_to_ldisc at ffffffff814a238a
     [ffff88085c6dbd50] process_one_work at ffffffff81090be2
     [ffff88085c6dbe20] worker_thread at ffffffff81091b4d
     [ffff88085c6dbeb0] kthread at ffffffff81096384
     [ffff88085c6dbf50] ret_from_fork at ffffffff81a3d69f​

after slogging through some dissasembly:

ffffffff814b6720 <uart_put_char>:
ffffffff814b6720:	55                   	push   %rbp
ffffffff814b6721:	48 89 e5             	mov    %rsp,%rbp
ffffffff814b6724:	48 83 ec 20          	sub    $0x20,%rsp
ffffffff814b6728:	48 89 1c 24          	mov    %rbx,(%rsp)
ffffffff814b672c:	4c 89 64 24 08       	mov    %r12,0x8(%rsp)
ffffffff814b6731:	4c 89 6c 24 10       	mov    %r13,0x10(%rsp)
ffffffff814b6736:	4c 89 74 24 18       	mov    %r14,0x18(%rsp)
ffffffff814b673b:	e8 b0 8e 58 00       	callq  ffffffff81a3f5f0 <mcount>
ffffffff814b6740:	4c 8b a7 88 02 00 00 	mov    0x288(%rdi),%r12
ffffffff814b6747:	45 31 ed             	xor    %r13d,%r13d
ffffffff814b674a:	41 89 f6             	mov    %esi,%r14d
ffffffff814b674d:	49 83 bc 24 70 01 00 	cmpq   $0x0,0x170(%r12)
ffffffff814b6754:	00 00
ffffffff814b6756:	49 8b 9c 24 80 01 00 	mov    0x180(%r12),%rbx
ffffffff814b675d:	00
ffffffff814b675e:	74 2f                	je     ffffffff814b678f <uart_put_char+0x6f>
ffffffff814b6760:	48 89 df             	mov    %rbx,%rdi
ffffffff814b6763:	e8 a8 67 58 00       	callq  ffffffff81a3cf10 <_raw_spin_lock_irqsave>
ffffffff814b6768:	41 8b 8c 24 78 01 00 	mov    0x178(%r12),%ecx
ffffffff814b676f:	00
ffffffff814b6770:	89 ca                	mov    %ecx,%edx
ffffffff814b6772:	f7 d2                	not    %edx
ffffffff814b6774:	41 03 94 24 7c 01 00 	add    0x17c(%r12),%edx
ffffffff814b677b:	00
ffffffff814b677c:	81 e2 ff 0f 00 00    	and    $0xfff,%edx
ffffffff814b6782:	75 23                	jne    ffffffff814b67a7 <uart_put_char+0x87>
ffffffff814b6784:	48 89 c6             	mov    %rax,%rsi
ffffffff814b6787:	48 89 df             	mov    %rbx,%rdi
ffffffff814b678a:	e8 e1 64 58 00       	callq  ffffffff81a3cc70 <_raw_spin_unlock_irqrestore>
ffffffff814b678f:	44 89 e8             	mov    %r13d,%eax
ffffffff814b6792:	48 8b 1c 24          	mov    (%rsp),%rbx
ffffffff814b6796:	4c 8b 64 24 08       	mov    0x8(%rsp),%r12
ffffffff814b679b:	4c 8b 6c 24 10       	mov    0x10(%rsp),%r13
ffffffff814b67a0:	4c 8b 74 24 18       	mov    0x18(%rsp),%r14
ffffffff814b67a5:	c9                   	leaveq
ffffffff814b67a6:	c3                   	retq
ffffffff814b67a7:	49 8b 94 24 70 01 00 	mov    0x170(%r12),%rdx
ffffffff814b67ae:	00
ffffffff814b67af:	48 63 c9             	movslq %ecx,%rcx
ffffffff814b67b2:	41 b5 01             	mov    $0x1,%r13b
ffffffff814b67b5:	44 88 34 0a          	mov    %r14b,(%rdx,%rcx,1)
ffffffff814b67b9:	41 8b 94 24 78 01 00 	mov    0x178(%r12),%edx
ffffffff814b67c0:	00
ffffffff814b67c1:	83 c2 01             	add    $0x1,%edx
ffffffff814b67c4:	81 e2 ff 0f 00 00    	and    $0xfff,%edx
ffffffff814b67ca:	41 89 94 24 78 01 00 	mov    %edx,0x178(%r12)
ffffffff814b67d1:	00
ffffffff814b67d2:	eb b0                	jmp    ffffffff814b6784 <uart_put_char+0x64>
ffffffff814b67d4:	66 66 66 2e 0f 1f 84 	data32 data32 nopw %cs:0x0(%rax,%rax,1)
ffffffff814b67db:	00 00 00 00 00

for our build, this is crashing at:

    circ->buf[circ->head] = c;

Looking in uart_port_startup(), it seems that circ->buf (state->xmit.buf)
protected by the "per-port mutex", which based on uart_port_check() is
state->port.mutex. Indeed, the lock acquired in uart_put_char() is
uport->lock, i.e. not the same lock.

Anyway, since the lock is not acquired, if uart_shutdown() is called, the
last chunk of that function may release state->xmit.buf before its assigned
to null, and cause the race above.

To fix it, let's lock uport->lock when allocating/deallocating
state->xmit.buf in addition to the per-port mutex.

v2: switch to locking uport->lock on allocation/deallocation instead of
    locking the per-port mutex in uart_put_char. Note that since
    uport->lock is a spin lock, we have to switch the allocation to
    GFP_ATOMIC.
v3: move the allocation outside the lock, so we can switch back to
    GFP_KERNEL

Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-13 11:26:43 +02:00
Jisheng Zhang
701c5e73b2 serial: 8250_dw: add fractional divisor support
For Synopsys DesignWare 8250 uart which version >= 4.00a, there's a
valid divisor latch fraction register. The fractional divisor width is
4bits ~ 6bits.

Now the preparation is done, it's easy to add the feature support.
This patch firstly tries to get the fractional divisor width during
probe, then setups dw specific get_divisor() and set_divisor() hook.

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-12 17:07:26 +02:00
Jisheng Zhang
6226e5f31a serial: 8250: export serial8250_do_set_divisor()
Some drivers could call serial8250_do_set_divisor() to complete its
own set_divisor routine. Export this symbol for code reusing.

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-12 17:07:26 +02:00
Jisheng Zhang
0238d2b4a4 serial: 8250: introduce get_divisor() and set_divisor() hook
Add these two hooks so that they can be overridden with driver specific
implementations.

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-12 17:07:26 +02:00
Samuel Thibault
16777ecd1b kbd: complete dead keys definitions
This completes dead keys definitions for internationalization
completeness on the console.  The representatives have been chosen
coherently with libx11 compose sequences, which avoid symetry conflicts
(e.g. there is U with caron, but no c with breve).

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07 17:41:38 +02:00
Colin Ian King
c9a104e23c parport: parport_serial: Add WCH CH382L PCIe single parallel port support
The WCH CH382L PCIe adapter has 1 parallel port but unlike the similar
WCH CH328 adapter there are no serial ports connected to it.  Enable
this adapter with the addition of the appropriate PCIe IDs and board
support config.

PCIe device ID 1c00:3050:

02:00.0 Serial controller: Device 1c00:3050 (rev 10) (prog-if 05 [16850])
	Subsystem: Device 1c00:3050
	Flags: fast devsel, IRQ 16
	I/O ports at 2000 [size=256]
	Memory at d0000000 (32-bit, prefetchable) [size=32K]
	I/O ports at 2100 [size=4]
	Expansion ROM at b0200000 [disabled] [size=32K]
	Capabilities: [60] Power Management version 3
	Capabilities: [68] MSI: Enable- Count=1/32 Maskable+ 64bit+
	Capabilities: [80] Express Legacy Endpoint, MSI 00
	Capabilities: [100] Advanced Error Reporting
	Kernel driver in use: parport_pc
	Kernel modules: parport_pc, parport_serial

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07 17:35:10 +02:00
Andy Shevchenko
3ff10703c7 serial: 8250_dw: Introduce IO accessors to extended registers
There are several extended (in comparison to the traditional 16550)
registers are present in Synopsys DesignWare UART. All of them
are 32-bit ones.

Introduce helpers to simplify access to them and convert existing users.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-07 17:00:51 +02:00
Mars Cheng
447735fafe dt-bindings: interrupt-controller: add binding for mt6765
Update the dt-binding documentation of sysirq for mt6765

Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-06 16:46:09 +02:00
Mars Cheng
eb3c74c27d dt-bindings: mtk-uart: add mt6765 uart bindings
Add documentation for mt6765 uart dt-bindings

Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-06 16:46:09 +02:00
Mars Cheng
2867443e3b dt-bindings: mediatek: add support for mt6765 reference board
Update binding document for mt6765 reference board

Signed-off-by: Mars Cheng <mars.cheng@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-06 16:46:09 +02:00
Jisheng Zhang
6101be86cb serial: 8250: let serial8250_get_divisor() get uart_port * as param
Align serial8250_get_divisor() with serial8250_set_divisor() to accept
uart_port pointer as the first parameter. No functionality changes.

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-06 16:45:38 +02:00
Geert Uytterhoeven
6eefc68d1b serial: sh-sci: Stop using deprecated dmaengine_terminate_all()
As of commit b36f09c3c4 ("dmaengine: Add transfer termination
synchronization support"), dmaengine_terminate_all() is deprecated.

Replace calls to dmaengine_terminate_all() in DMA release code by calls
to dmaengine_terminate_sync(), as the latter waits until all running
completion callbacks have finished.

Replace calls to dmaengine_terminate_all() in DMA failure paths by calls
to dmaengine_terminate_async(), as these are usually done in atomic
context.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-06 16:41:15 +02:00
Geert Uytterhoeven
f661131766 serial: sh-sci: Stop TX DMA workqueue during port shutdown
The transmit DMA workqueue is never stopped, hence the work function may
be called after the port has been shut down.

Fix this race condition by cancelling queued work, if any, before DMA
release.  Don't initialize the work if DMA initialization failed, as it
won't be used anyway.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-06 16:41:15 +02:00
Geert Uytterhoeven
2c4ee23530 serial: sh-sci: Postpone DMA release when falling back to PIO
When the sh-sci driver detects an issue with DMA during operation, it
falls backs to PIO, and releases all DMA resources.

As releasing DMA resources immediately has no advantages, but
complicates the code, and is susceptible to races, it is better to
postpone this to port shutdown.

This allows to remove the locking from sci_rx_dma_release() and
sci_tx_dma_release(), but requires keeping a copy of the DMA channel
pointers for release during port shutdown.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-06 16:41:15 +02:00
Geert Uytterhoeven
c5a9262fa8 serial: sh-sci: Stop RX FIFO timer during port shutdown
The RX FIFO timer may be armed when the port is shut down, hence the
timer function may still be called afterwards.

Fix this race condition by deleting the timer during port shutdown.

Fixes: 039403765e ("serial: sh-sci: SCIFA/B RX FIFO software timeout")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-06 16:41:15 +02:00
Greg Kroah-Hartman
16ecf49c10 Merge 4.18-rc3 into tty-next
We want ths tty core changes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-02 08:23:43 +02:00
Linus Torvalds
021c91791a Linux 4.18-rc3 2018-07-01 16:04:53 -07:00
Linus Torvalds
d3bc0e67f8 for-4.18-rc2-tag
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAls4zz0ACgkQxWXV+ddt
 WDs0ZhAAplEAcN1BP986BS7GpjrG20vQtP9AnHlnSEJJJmsnykpspBylOcLRkKjF
 LKBfBPCKqIo7kn5ebKT1Kk7zJPkOOEfmxGW7hffVN/oa/oMtmgJbbHDUgl2TDgdu
 rky1O+Bj+S37s5rhiXAJ4oU9ekdpWIlN30GczfynjiPqGigKh/cINsEEhQIIAiJG
 PRDQfSIJeh67x1AP0KE8sJAYSsaeFxT+kHrT/NPs1NFDSzrQSa/QWPFVjGVVuI/Y
 w84Mo0EqdRV7tap7D3QyWyYea6zdP00PG8TyLl0Kba+LckFbzpNN5hP3SUxleBzL
 0ZBJi7/tOqnrMV3YaGm40dLfgD4B+CFt8zDyg2JvWUxxEzfQfYif7KIT2IV8fSqS
 QrVw2NrzQC7EZ4Zu98wCN7dyyOE8yhqbq805YdG3Nj+zT6DqRu01TBo4Yr/Ek8ux
 +ITAtQVbaOZmTIt/qh/Oxc5jRsurAno1FP3XRH+1hfSlS7xc3LfI1CUbX3jAKzXN
 edxdM4/h+d4nekvROnKBH4EheS6+ZVfgzYlYUW9c2rjcJ1RHhDElbh14+IoM6LKJ
 nJ+Cp+744F6W5jaG3oWElJrdhlY31mWUjiZaj2CHl16EcH3MToytrxKMX+OWo95W
 gChnKicrtpO6+9nbED3Tdhp7SkbDysun6jvEpSgdlm8+2H5Kwrw=
 =KWL7
 -----END PGP SIGNATURE-----

Merge tag 'for-4.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "We have a few regression fixes for qgroup rescan status tracking and
  the vm_fault_t conversion that mixed up the error values"

* tag 'for-4.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: fix mount failure when qgroup rescan is in progress
  Btrfs: fix regression in btrfs_page_mkwrite() from vm_fault_t conversion
  btrfs: quota: Set rescan progress to (u64)-1 if we hit last leaf
2018-07-01 12:38:16 -07:00
Linus Torvalds
4a770e638f Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fix from Al Viro:
 "Followup to procfs-seq_file series this window"

This fixes a memory leak by making sure that proc seq files release any
private data on close.  The 'proc_seq_open' has to be properly paired
with 'proc_seq_release' that releases the extra private data.

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  proc: add proc_seq_release
2018-07-01 12:32:19 -07:00