Add support for STATX_DIOALIGN to xfs, so that direct I/O alignment
restrictions are exposed to userspace in a generic way.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20220827065851.135710-9-ebiggers@kernel.org
Add support for STATX_DIOALIGN to f2fs, so that direct I/O alignment
restrictions are exposed to userspace in a generic way.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Link: https://lore.kernel.org/r/20220827065851.135710-8-ebiggers@kernel.org
f2fs only allows direct I/O that is aligned to the filesystem block
size. Given that fact, simplify f2fs_force_buffered_io() by removing
the redundant call to block_unaligned_IO().
This makes it easier to reuse this code for STATX_DIOALIGN.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Link: https://lore.kernel.org/r/20220827065851.135710-7-ebiggers@kernel.org
f2fs_force_buffered_io() is only used in file.c, so move it into there.
No behavior change. This makes it easier to review later patches.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Link: https://lore.kernel.org/r/20220827065851.135710-6-ebiggers@kernel.org
Add support for STATX_DIOALIGN to ext4, so that direct I/O alignment
restrictions are exposed to userspace in a generic way.
Acked-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220827065851.135710-5-ebiggers@kernel.org
To prepare for STATX_DIOALIGN support, make two changes to
fscrypt_dio_supported().
First, remove the filesystem-block-alignment check and make the
filesystems handle it instead. It previously made sense to have it in
fs/crypto/; however, to support STATX_DIOALIGN the alignment restriction
would have to be returned to filesystems. It ends up being simpler if
filesystems handle this part themselves, especially for f2fs which only
allows fs-block-aligned DIO in the first place.
Second, make fscrypt_dio_supported() work on inodes whose encryption key
hasn't been set up yet, by making it set up the key if needed. This is
required for statx(), since statx() doesn't require a file descriptor.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220827065851.135710-4-ebiggers@kernel.org
Add support for STATX_DIOALIGN to block devices, so that direct I/O
alignment restrictions are exposed to userspace in a generic way.
Note that this breaks the tradition of stat operating only on the block
device node, not the block device itself. However, it was felt that
doing this is preferable, in order to make the interface useful and
avoid needing separate interfaces for regular files and block devices.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Link: https://lore.kernel.org/r/20220827065851.135710-3-ebiggers@kernel.org
Traditionally, the conditions for when DIO (direct I/O) is supported
were fairly simple. For both block devices and regular files, DIO had
to be aligned to the logical block size of the block device.
However, due to filesystem features that have been added over time (e.g.
multi-device support, data journalling, inline data, encryption, verity,
compression, checkpoint disabling, log-structured mode), the conditions
for when DIO is allowed on a regular file have gotten increasingly
complex. Whether a particular regular file supports DIO, and with what
alignment, can depend on various file attributes and filesystem mount
options, as well as which block device(s) the file's data is located on.
Moreover, the general rule of DIO needing to be aligned to the block
device's logical block size was recently relaxed to allow user buffers
(but not file offsets) aligned to the DMA alignment instead. See
commit bf8d08532b ("iomap: add support for dma aligned direct-io").
XFS has an ioctl XFS_IOC_DIOINFO that exposes DIO alignment information.
Uplifting this to the VFS is one possibility. However, as discussed
(https://lore.kernel.org/linux-fsdevel/20220120071215.123274-1-ebiggers@kernel.org/T/#u),
this ioctl is rarely used and not known to be used outside of
XFS-specific code. It was also never intended to indicate when a file
doesn't support DIO at all, nor was it intended for block devices.
Therefore, let's expose this information via statx(). Add the
STATX_DIOALIGN flag and two new statx fields associated with it:
* stx_dio_mem_align: the alignment (in bytes) required for user memory
buffers for DIO, or 0 if DIO is not supported on the file.
* stx_dio_offset_align: the alignment (in bytes) required for file
offsets and I/O segment lengths for DIO, or 0 if DIO is not supported
on the file. This will only be nonzero if stx_dio_mem_align is
nonzero, and vice versa.
Note that as with other statx() extensions, if STATX_DIOALIGN isn't set
in the returned statx struct, then these new fields won't be filled in.
This will happen if the file is neither a regular file nor a block
device, or if the file is a regular file and the filesystem doesn't
support STATX_DIOALIGN. It might also happen if the caller didn't
include STATX_DIOALIGN in the request mask, since statx() isn't required
to return unrequested information.
This commit only adds the VFS-level plumbing for STATX_DIOALIGN. For
regular files, individual filesystems will still need to add code to
support it. For block devices, a separate commit will wire it up too.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220827065851.135710-2-ebiggers@kernel.org
installed at such instructions, possibly resulting in
incorrect execution (the wrong branch taken).
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=eXIr
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2022-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 kprobes fix from Ingo Molnar:
"Fix a kprobes bug in JNG/JNLE emulation when a kprobe is installed at
such instructions, possibly resulting in incorrect execution (the
wrong branch taken)"
* tag 'perf-urgent-2022-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Fix JNG/JNLE emulation
- Fix a return value of traceprobe_parse_event_name()
- Fix NULL pointer dereference from failed ftrace enabling
- Fix NULL pointer dereference when asking for registers from eprobes
- Make eprobes consistent with kprobes/uprobes, filters and histograms
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYwKRrhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qosDAP9WySmPxjoMfR0hbjmnepLy2zJtBbIq
ABWR3LDrjvLlYwD9H/wrD+6ctOZtXh5XJc0Vn5z6XEyNtqrVGSse7Lm+sg4=
=qb/R
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various fixes for tracing:
- Fix a return value of traceprobe_parse_event_name()
- Fix NULL pointer dereference from failed ftrace enabling
- Fix NULL pointer dereference when asking for registers from eprobes
- Make eprobes consistent with kprobes/uprobes, filters and
histograms"
* tag 'trace-v6.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Have filter accept "common_cpu" to be consistent
tracing/probes: Have kprobes and uprobes use $COMM too
tracing/eprobes: Have event probes be consistent with kprobes and uprobes
tracing/eprobes: Fix reading of string fields
tracing/eprobes: Do not hardcode $comm as a string
tracing/eprobes: Do not allow eprobes to use $stack, or % for regs
ftrace: Fix NULL pointer dereference in is_ftrace_trampoline when ftrace is dead
tracing/perf: Fix double put of trace event when init fails
tracing: React to error return from traceprobe_parse_event_name()
Make filtering consistent with histograms. As "cpu" can be a field of an
event, allow for "common_cpu" to keep it from being confused with the
"cpu" field of the event.
Link: https://lkml.kernel.org/r/20220820134401.513062765@goodmis.org
Link: https://lore.kernel.org/all/20220820220920.e42fa32b70505b1904f0a0ad@kernel.org/
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 1e3bac71c5 ("tracing/histogram: Rename "cpu" to "common_cpu"")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Both $comm and $COMM can be used to get current->comm in eprobes and the
filtering and histogram logic. Make kprobes and uprobes consistent in this
regard and allow both $comm and $COMM as well. Currently kprobes and
uprobes only handle $comm, which is inconsistent with the other utilities,
and can be confusing to users.
Link: https://lkml.kernel.org/r/20220820134401.317014913@goodmis.org
Link: https://lore.kernel.org/all/20220820220442.776e1ddaf8836e82edb34d01@kernel.org/
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 533059281e ("tracing: probeevent: Introduce new argument fetching code")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently, if a symbol "@" is attempted to be used with an event probe
(eprobes), it will cause a NULL pointer dereference crash.
Both kprobes and uprobes can reference data other than the main registers.
Such as immediate address, symbols and the current task name. Have eprobes
do the same thing.
For "comm", if "comm" is used and the event being attached to does not
have the "comm" field, then make it the "$comm" that kprobes has. This is
consistent to the way histograms and filters work.
Link: https://lkml.kernel.org/r/20220820134401.136924220@goodmis.org
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c442 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently when an event probe (eprobe) hooks to a string field, it does
not display it as a string, but instead as a number. This makes the field
rather useless. Handle the different kinds of strings, dynamic, static,
relational/dynamic etc.
Now when a string field is used, the ":string" type can be used to display
it:
echo "e:sw sched/sched_switch comm=$next_comm:string" > dynamic_events
Link: https://lkml.kernel.org/r/20220820134400.959640191@goodmis.org
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c442 ("tracing: Add a probe that attaches to trace events")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The variable $comm is hard coded as a string, which is true for both
kprobes and uprobes, but for event probes (eprobes) it is a field name. In
most cases the "comm" field would be a string, but there's no guarantee of
that fact.
Do not assume that comm is a string. Not to mention, it currently forces
comm fields to fault, as string processing for event probes is currently
broken.
Link: https://lkml.kernel.org/r/20220820134400.756152112@goodmis.org
Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c442 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If in perf_trace_event_init(), the perf_trace_event_open() fails, then it
will call perf_trace_event_unreg() which will not only unregister the perf
trace event, but will also call the put() function of the tp_event.
The problem here is that the trace_event_try_get_ref() is called by the
caller of perf_trace_event_init() and if perf_trace_event_init() returns a
failure, it will then call trace_event_put(). But since the
perf_trace_event_unreg() already called the trace_event_put() function, it
triggers a WARN_ON().
WARNING: CPU: 1 PID: 30309 at kernel/trace/trace_dynevent.c:46 trace_event_dyn_put_ref+0x15/0x20
If perf_trace_event_reg() does not call the trace_event_try_get_ref() then
the perf_trace_event_unreg() should not be calling trace_event_put(). This
breaks symmetry and causes bugs like these.
Pull out the trace_event_put() from perf_trace_event_unreg() and call it
in the locations that perf_trace_event_unreg() is called. This not only
fixes this bug, but also brings back the proper symmetry of the reg/unreg
vs get/put logic.
Link: https://lore.kernel.org/all/cover.1660347763.git.kjlx@templeofstupid.com/
Link: https://lkml.kernel.org/r/20220816192817.43d5e17f@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: 1d18538e6a ("tracing: Have dynamic events have a ref counter")
Reported-by: Krister Johansen <kjlx@templeofstupid.com>
Reviewed-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Krister Johansen <kjlx@templeofstupid.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function traceprobe_parse_event_name() may set the first two function
arguments to a non-null value and still return -EINVAL to indicate an
unsuccessful completion of the function. Hence, it is not sufficient to
just check the result of the two function arguments for being not null,
but the return value also needs to be checked.
Commit 95c104c378 ("tracing: Auto generate event name when creating a
group of events") changed the error-return-value checking of the second
traceprobe_parse_event_name() invocation in __trace_eprobe_create() and
removed checking the return value to jump to the error handling case.
Reinstate using the return value in the error-return-value checking.
Link: https://lkml.kernel.org/r/20220811071734.20700-1-lukas.bulwahn@gmail.com
Fixes: 95c104c378 ("tracing: Auto generate event name when creating a group of events")
Acked-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
merge window and a fix for proper error handling in the remove path of
the iMX driver.
-----BEGIN PGP SIGNATURE-----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=aSFj
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A revert to fix a regression introduced this merge window and a fix
for proper error handling in the remove path of the iMX driver"
* tag 'i2c-for-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: imx: Make sure to unregister adapter on remove()
Revert "i2c: scmi: Replace open coded device_get_match_data()"
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmMBX5YACgkQiiy9cAdy
T1GNGgv/bH2tKQ+xOSoHgAUB8x5C1qWCba1KqmF/1e86QWkEaOy3APPH0D4whm2T
KsO9bI2xLAO7TnsGjr+llPRWLE4uyL3tg4PRuoHJdLlq0UibvWcd7crtRfJtyNOm
E8S0ouJ0+0Dv026c3KKovYrnHtin/I/KLZp57W1qmslyJEaHflxW4RqEOROLYTjK
FpEtKyMO1/ivcK6s8l2RcNMcHqkx+HZvzNub4hAdUJOTf8DJ2lLc/PjfDtB4HQlE
d+Pant1zdZaehZcymzk6x8oq1LIgfVgkFTWJyrr/FLJq2S8E/XbC54tdzTfIySsY
F5So874fBm6Eal+0qxdm4cYbrE+YjeKwyTHlY836D0InOHxT2noE8i0KSNCP9sfj
K/gt4SmxkxMASUycZ5rmOvhw/RghOSWtTNTQeiU1fheuXBaCe+dKgdAEQXdqQ0Kt
I4gCuT6eGRdz9J6AVVIzsaYZFODRlBh50AMS3xkrRlqJ1jxn0E3Zuu3DTTleeknW
IgGiZ7LC
=dod2
-----END PGP SIGNATURE-----
Merge tag '6.0-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
- memory leak fix
- two small cleanups
- trivial strlcpy removal
- update missing entry for cifs headers in MAINTAINERS file
* tag '6.0-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: move from strlcpy with unused retval to strscpy
cifs: Fix memory leak on the deferred close
cifs: remove useless parameter 'is_fsctl' from SMB2_ioctl()
cifs: remove unused server parameter from calc_smb_size()
cifs: missing directory in MAINTAINERS file
GCC has supported asm goto since 4.5, and Clang has since version 9.0.0.
The minimum supported versions of these tools for the build according to
Documentation/process/changes.rst are 5.1 and 11.0.0 respectively.
Remove the feature detection script, Kconfig option, and clean up some
fallback code that is no longer supported.
The removed script was also testing for a GCC specific bug that was
fixed in the 4.7 release.
Also remove workarounds for bpftrace using clang older than 9.0.0, since
other BPF backend fixes are required at this point.
Link: https://lore.kernel.org/lkml/CAK7LNATSr=BXKfkdW8f-H5VT_w=xBpT2ZQcZ7rm6JfkdE+QnmA@mail.gmail.com/
Link: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=48637
Acked-by: Borislav Petkov <bp@suse.de>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If for whatever reasons pm_runtime_resume_and_get() fails and .remove() is
exited early, the i2c adapter stays around and the irq still calls its
handler, while the driver data and the register mapping go away. So if
later the i2c adapter is accessed or the irq triggers this results in
havoc accessing freed memory and unmapped registers.
So unregister the software resources even if resume failed, and only skip
the hardware access in that case.
Fixes: 588eb93ea4 ("i2c: imx: add runtime pm support to improve the performance")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
- Fix module versioning broken on some architectures
- Make dummy-tools enable CONFIG_PPC_LONG_DOUBLE_128
- Remove -Wformat-zero-length, which has no warning instance
- Fix the order between drivers and libs in modules.order
- Fix false-positive warnings in clang-analyzer
-----BEGIN PGP SIGNATURE-----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=jk33
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix module versioning broken on some architectures
- Make dummy-tools enable CONFIG_PPC_LONG_DOUBLE_128
- Remove -Wformat-zero-length, which has no warning instance
- Fix the order between drivers and libs in modules.order
- Fix false-positive warnings in clang-analyzer
* tag 'kbuild-fixes-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
scripts/clang-tools: Remove DeprecatedOrUnsafeBufferHandling check
kbuild: fix the modules order between drivers and libs
scripts/Makefile.extrawarn: Do not disable clang's -Wformat-zero-length
kbuild: dummy-tools: pretend we understand __LONG_DOUBLE_128__
modpost: fix module versioning when a symbol lacks valid CRC
- Fix alignment for cpu map masks in event encoding.
- Support reading PERF_FORMAT_LOST, perf tool counterpart for a feature
that was added in this merge window.
- Sync perf tools copies of kernel headers: socket, msr-index, fscrypt,
cpufeatures, i915_drm, kvm, vhost, perf_event.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYv/jZAAKCRCyPKLppCJ+
J5ZWAP9P7qMcKppgzYqnHU7TX2tJoT7WbYpaf2lp0TkIpynKdAD9E+9FjbAnQznN
90DIIH/BljChgiUTkMxHaAl789XL1gU=
=UXWB
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.0-2022-08-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix alignment for cpu map masks in event encoding.
- Support reading PERF_FORMAT_LOST, perf tool counterpart for a feature
that was added in this merge window.
- Sync perf tools copies of kernel headers: socket, msr-index, fscrypt,
cpufeatures, i915_drm, kvm, vhost, perf_event.
* tag 'perf-tools-fixes-for-v6.0-2022-08-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf tools: Support reading PERF_FORMAT_LOST
libperf: Add a test case for read formats
libperf: Handle read format in perf_evsel__read()
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
tools headers UAPI: Sync KVM's vmx.h header with the kernel sources
tools include UAPI: Sync linux/vhost.h with the kernel sources
tools headers kvm s390: Sync headers with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync linux/fscrypt.h with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf beauty: Update copy of linux/socket.h with the kernel sources
perf cpumap: Fix alignment for masks in event encoding
perf cpumap: Compute mask size in constant time
perf cpumap: Synthetic events and const/static
perf cpumap: Const map for max()
- Fix a KVM crash on z12 and older machines caused by a wrong
assumption that Query AP Configuration Information is always
available.
- Lower severity of excessive Hypervisor filesystem error messages
when booting under KVM.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCYwB2ahccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8DSLAP4lScZKm0o1eCJ/impnmFydkKDO
SWHqP0ZTLNJvVtpp3gD+IpOLRAIPcBKA3+/c9nG35rw+TfoRbpbWbV70/PVpQgA=
=Vcv6
-----END PGP SIGNATURE-----
Merge tag 's390-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Alexander Gordeev:
- Fix a KVM crash on z12 and older machines caused by a wrong
assumption that Query AP Configuration Information is always
available.
- Lower severity of excessive Hypervisor filesystem error messages
when booting under KVM.
* tag 's390-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ap: fix crash on older machines based on QCI info missing
s390/hypfs: avoid error message under KVM
- Fix atomic sleep warnings at boot due to get_phb_number() taking a mutex with a
spinlock held on some machines.
- Add missing PMU selftests to .gitignores.
Thanks to: Guenter Roeck, Russell Currey.
-----BEGIN PGP SIGNATURE-----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=Yvlp
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix atomic sleep warnings at boot due to get_phb_number() taking a
mutex with a spinlock held on some machines.
- Add missing PMU selftests to .gitignores.
Thanks to Guenter Roeck and Russell Currey.
* tag 'powerpc-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Add missing PMU selftests to .gitignores
powerpc/pci: Fix get_phb_number() locking
A few minor fixes:
- Fix buffer management in SRP to correct a regression with the login
authentication feature from v5.17
- Don't iterate over non-present ports in mlx5
- Fix an error introduced by the foritify work in cxgb4
- Two bug fixes for the recently merged ERDMA driver
- Unbreak RDMA dmabuf support, a regresion from v5.19
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCYv/TNgAKCRCFwuHvBreF
YUVTAP9Sh9xQVDGLZro2fUI1eVLZvjbu7qWPm7tmUC3AptJSyQD9FvRbU2IVMyRM
iw38PPMWAAEukmib6xypsAC+/eUSpQM=
=+t0D
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"A few minor fixes:
- Fix buffer management in SRP to correct a regression with the login
authentication feature from v5.17
- Don't iterate over non-present ports in mlx5
- Fix an error introduced by the foritify work in cxgb4
- Two bug fixes for the recently merged ERDMA driver
- Unbreak RDMA dmabuf support, a regresion from v5.19"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA: Handle the return code from dma_resv_wait_timeout() properly
RDMA/erdma: Correct the max_qp and max_cq capacities of the device
RDMA/erdma: Using the key in FMR WR instead of MR structure
RDMA/cxgb4: fix accept failure due to increased cpl_t5_pass_accept_rpl size
RDMA/mlx5: Use the proper number of ports
IB/iser: Fix login with authentication
This `clang-analyzer` check flags the use of memset(), suggesting a more
secure version of the API, such as memset_s(), which does not exist in
the kernel:
warning: Call to function 'memset' is insecure as it does not provide
security checks introduced in the C11 standard. Replace with analogous
functions that support length arguments or provides boundary checks such
as 'memset_s' in case of C11
[clang-analyzer-security.insecureAPI.DeprecatedOrUnsafeBufferHandling]
Signed-off-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit b2c8855491 ("kbuild: update modules.order only when contained
modules are updated") accidentally changed the modules order.
Prior to that commit, the modules order was determined based on
vmlinux-dirs, which lists core-y/m, drivers-y/m, libs-y/m, in this order.
Now, subdir-modorder lists them in a different order: core-y/m, libs-y/m,
drivers-y/m.
Presumably, there was no practical issue because the modules in drivers
and libs are orthogonal, but there is no reason to have this distortion.
Get back to the original order.
Fixes: b2c8855491 ("kbuild: update modules.order only when contained modules are updated")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
There are no instances of this warning in the tree across several
difference architectures and configurations. This was added by
commit 26ea6bb1fe ("kbuild, LLVMLinux: Supress warnings unless W=1-3")
back in 2014, where it might have been necessary, but there are no
instances of it now so stop disabling it to increase warning coverage
for clang.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
There is a test in powerpc's Kconfig which checks __LONG_DOUBLE_128__
and sets CONFIG_PPC_LONG_DOUBLE_128 if it is understood by the compiler.
We currently don't handle it, so this results in PPC_LONG_DOUBLE_128 not
being in super-config generated by dummy-tools. So take this into
account in the gcc script and preprocess __LONG_DOUBLE_128__ as "1".
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Since commit 7b4537199a ("kbuild: link symbol CRCs at final link,
removing CONFIG_MODULE_REL_CRCS"), module versioning is broken on
some architectures. Loading a module fails with "disagrees about
version of symbol module_layout".
On such architectures (e.g. ARCH=sparc build with sparc64_defconfig),
modpost shows a warning, like follows:
WARNING: modpost: EXPORT symbol "_mcount" [vmlinux] version generation failed, symbol will not be versioned.
Is "_mcount" prototyped in <asm/asm-prototypes.h>?
Previously, it was a harmless warning (CRC check was just skipped),
but now wrong CRCs are used for comparison because invalid CRCs are
just skipped.
$ sparc64-linux-gnu-nm -n vmlinux
[snip]
0000000000c2cea0 r __ksymtab__kstrtol
0000000000c2ceb8 r __ksymtab__kstrtoul
0000000000c2ced0 r __ksymtab__local_bh_enable
0000000000c2cee8 r __ksymtab__mcount
0000000000c2cf00 r __ksymtab__printk
0000000000c2cf18 r __ksymtab__raw_read_lock
0000000000c2cf30 r __ksymtab__raw_read_lock_bh
[snip]
0000000000c53b34 D __crc__kstrtol
0000000000c53b38 D __crc__kstrtoul
0000000000c53b3c D __crc__local_bh_enable
0000000000c53b40 D __crc__printk
0000000000c53b44 D __crc__raw_read_lock
0000000000c53b48 D __crc__raw_read_lock_bh
Please notice __crc__mcount is missing here.
When the module subsystem looks up a CRC that comes after, it results
in reading out a wrong address. For example, when __crc__printk is
needed, the module subsystem reads 0xc53b44 instead of 0xc53b40.
All CRC entries must be output for correct index accessing. Invalid
CRCs will be unused, but are needed to keep the one-to-one mapping
between __ksymtab_* and __crc_*.
The best is to fix all modpost warnings, but several warnings are still
remaining on less popular architectures.
Fixes: 7b4537199a ("kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS")
Reported-by: matoro <matoro_mailinglist_kernel@matoro.tk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: matoro <matoro_mailinglist_kernel@matoro.tk>
-----BEGIN PGP SIGNATURE-----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=y2HE
-----END PGP SIGNATURE-----
Merge tag 'block-6.0-2022-08-19' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes that should go into this release:
- Small series of patches for ublk (ZiyangZhang)
- Remove dead function (Yu)
- Fix for running a block queue in case of resource starvation
(Yufen)"
* tag 'block-6.0-2022-08-19' of git://git.kernel.dk/linux-block:
blk-mq: run queue no matter whether the request is the last request
blk-mq: remove unused function blk_mq_queue_stopped()
ublk_drv: do not add a re-issued request aborted previously to ioucmd's task_work
ublk_drv: update comment for __ublk_fail_req()
ublk_drv: check ubq_daemon_is_dying() in __ublk_rq_task_work()
ublk_drv: update iod->addr for UBLK_IO_NEED_GET_DATA
-----BEGIN PGP SIGNATURE-----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=hsdA
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.0-2022-08-19' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few fixes for regressions in this cycle:
- Two instances of using the wrong "has async data" helper (Pavel)
- Fixup zero-copy address import (Pavel)
- Bump zero-copy notification slot limit (Pavel)"
* tag 'io_uring-6.0-2022-08-19' of git://git.kernel.dk/linux-block:
io_uring/net: use right helpers for async_data
io_uring/notif: raise limit on notification slots
io_uring/net: improve zc addr import error handling
io_uring/net: use right helpers for async recycle
* Add a missing command name definition for ata_get_cmd_name(), from me.
* A fix to address a performance regression due to the default max_sectors queue limit for ATA devices connected
to AHCI adapters being too small, from John.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYwENCAAKCRDdoc3SxdoY
dpmEAQC52FfX5ttpVz45zqhKgG9LHVB2pGXuIXj1yVULKNm4ywEA26sVVNj373Ne
2RskpX/l33TgBFy6XJ8cBTqGUEaOSw8=
=82M4
-----END PGP SIGNATURE-----
Merge tag 'ata-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fixes from Damien Le Moal:
- Add a missing command name definition for ata_get_cmd_name(), from
me.
- A fix to address a performance regression due to the default
max_sectors queue limit for ATA devices connected to AHCI adapters
being too small, from John.
* tag 'ata-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata: Set __ATA_BASE_SHT max_sectors
ata: libata-eh: Add missing command name
- meson-gx: Fix error handling in ->probe()
- mtk-sd: Fix a command problem when using cqe off/disable
- pxamci: Fix error handling in ->probe()
- sdhci-of-dwcmshc: Fix broken support for the BlueField-3 variant
-----BEGIN PGP SIGNATURE-----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=vAkO
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- meson-gx: Fix error handling in ->probe()
- mtk-sd: Fix a command problem when using cqe off/disable
- pxamci: Fix error handling in ->probe()
- sdhci-of-dwcmshc: Fix broken support for the BlueField-3 variant
* tag 'mmc-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-of-dwcmshc: Re-enable support for the BlueField-3 SoC
mmc: meson-gx: Fix an error handling path in meson_mmc_probe()
mmc: mtk-sd: Clear interrupts when cqe off/disable
mmc: pxamci: Fix another error handling path in pxamci_probe()
mmc: pxamci: Fix an error handling path in pxamci_probe()
Commit 0568e61225 ("ata: libata-scsi: cap ata_device->max_sectors
according to shost->max_sectors") inadvertently capped the max_sectors
value for some SATA disks to a value which is lower than we would want.
For a device which supports LBA48, we would previously have request queue
max_sectors_kb and max_hw_sectors_kb values of 1280 and 32767 respectively.
For AHCI controllers, the value chosen for shost max sectors comes from
the minimum of the SCSI host default max sectors in
SCSI_DEFAULT_MAX_SECTORS (1024) and the shost DMA device mapping limit.
This means that we would now set the max_sectors_kb and max_hw_sectors_kb
values for a disk which supports LBA48 at 512, ignoring DMA mapping limit.
As report by Oliver at [0], this caused a performance regression.
Fix by picking a large enough max sectors value for ATA host controllers
such that we don't needlessly reduce max_sectors_kb for LBA48 disks.
[0] https://lore.kernel.org/linux-ide/YvsGbidf3na5FpGb@xsang-OptiPlex-9020/T/#m22d9fc5ad15af66066dd9fecf3d50f1b1ef11da3
Fixes: 0568e61225 ("ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors")
Reported-by: Oliver Sang <oliver.sang@intel.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
* A fix to make the ISA extension static keys writable after init. This
manifests at least as a crash when loading modules (including KVM).
* A fixup for a build warning related to a poorly formed comment in our
perf driver.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEAM520YNJYN/OiG3470yhUCzLq0EFAmL/qf0THHBhbG1lckBk
YWJiZWx0LmNvbQAKCRDvTKFQLMurQbGjD/9Fr/B2qqlIc8EnpFseQqqtp7RkLjJP
0JslYH1hHkcM7KC8UoFPPANFO0rXDZLZ24/otBIT7slUw/mlbeBriZkhIHlAs+3/
B8bYf7Vp163wBu6TW+L9bmY9a3cqqkvXrHg7gXCeWTI6zpoRoZji8wuTEj0/lAhS
e35xAiLip3qaIFBEKRjKTf0UWJiSPTGyLLvvHM3QbbRl8n7wxxzRPZjkdsYhaztw
3jHu9SFd4HIpJKmWRORAxXbNQOglKSPSegni7QqmqH+4OGw9dJ/0gnwOWPvFcBgy
RaeOsHTbLvoFcjExDBIXle9QXg32qWHn9q4Zbvlu8IR6sKaRj42NkwObF8z6dMZg
eyvd1t6PXFP8yMmVq1WZca7XT/bJkZ0iGiGgH1qGM1linEi+KNkTqpB73/AXkT0G
/nSYkv+rG+JSLlKxOxTF2lPFpCMjuH/XFO/Z3Pvdjkt8NAaY3fjgoeQ9MtOHRpfE
MTiq3sk/qE5CEGgrJllQCO2+rqw9dThcBZamiLSBK/UfnkUCb04gTpABBVV6m0OV
S6SDqGZcQ+galpiGl5KUQPgBRbhRoSLsOInd/O5fzQvljtxbnU6PIWJ4anKUAL1v
BTftFVejyMxB+hnhiecxmu9hYHM91LoyKrWKd2LZu1yrWA5E+5qUys9CP7tsK26U
Cjht1kLaA9CoTw==
=AppI
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to make the ISA extension static keys writable after init. This
manifests at least as a crash when loading modules (including KVM).
- A fixup for a build warning related to a poorly formed comment in our
perf driver.
* tag 'riscv-for-linus-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
perf: riscv legacy: fix kerneldoc comment warning
riscv: Ensure isa-ext static keys are writable
* Fix unexpected sign extension of KVM_ARM_DEVICE_ID_MASK
* Tidy-up handling of AArch32 on asymmetric systems
x86:
* Fix "missing ENDBR" BUG for fastop functions
Generic:
* Some cleanup and static analyzer patches
* More fixes to KVM_CREATE_VM unwind paths
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmL/YoEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNK7wf/f/CxUT2NW8+klMBSUTL6YNMwPp5A
9xpfASi4pGiID27EEAOOLWcOr+A5bfa7fLS70Dyc+Wq9h0/tlnhFEF1X9RdLNHc+
I2HgNB64TZI7aLiZSm3cH3nfoazkAMPbGjxSlDmhH58cR9EPIlYeDeVMR/velbDZ
Z4kfwallR2Mizb7olvXy0lYfd6jZY+JkIQQtgml801aIpwkJggwqhnckbxCDEbSx
oB17T99Q2UQasDFusjvZefHjPhwZ7rxeXNTKXJLZNWecd7lAoPYJtTiYw+cxHmSY
JWsyvtcHons6uNoP1y60/OuVYcLFseeY3Yf9sqI8ivyF0HhS1MXQrcXX8g==
=V4Ib
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix unexpected sign extension of KVM_ARM_DEVICE_ID_MASK
- Tidy-up handling of AArch32 on asymmetric systems
x86:
- Fix 'missing ENDBR' BUG for fastop functions
Generic:
- Some cleanup and static analyzer patches
- More fixes to KVM_CREATE_VM unwind paths"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: Drop unnecessary initialization of "ops" in kvm_ioctl_create_device()
KVM: Drop unnecessary initialization of "npages" in hva_to_pfn_slow()
x86/kvm: Fix "missing ENDBR" BUG for fastop functions
x86/kvm: Simplify FOP_SETCC()
x86/ibt, objtool: Add IBT_NOSEAL()
KVM: Rename mmu_notifier_* to mmu_invalidate_*
KVM: Rename KVM_PRIVATE_MEM_SLOTS to KVM_INTERNAL_MEM_SLOTS
KVM: MIPS: remove unnecessary definition of KVM_PRIVATE_MEM_SLOTS
KVM: Move coalesced MMIO initialization (back) into kvm_create_vm()
KVM: Unconditionally get a ref to /dev/kvm module when creating a VM
KVM: Properly unwind VM creation if creating debugfs fails
KVM: arm64: Reject 32bit user PSTATE on asymmetric systems
KVM: arm64: Treat PMCR_EL1.LC as RES1 on asymmetric systems
KVM: arm64: Fix compile error due to sign extension
-----BEGIN PGP SIGNATURE-----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=HgV0
-----END PGP SIGNATURE-----
Merge tag 'for-6.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few short fixes and a lockdep warning fix (needs moving some code):
- tree-log replay fixes:
- fix error handling when looking up extent refs
- fix warning when setting inode number of links
- relocation fixes:
- reset block group read-only status when relocation fails
- unset control structure if transaction fails when starting
to process a block group
- add lockdep annotations to fix a warning during relocation
where blocks temporarily belong to another tree and can lead
to reversed dependencies
- tree-checker verifies that extent items don't overlap"
* tag 'for-6.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: tree-checker: check for overlapping extent items
btrfs: fix warning during log replay when bumping inode link count
btrfs: fix lost error handling when looking up extended ref on log replay
btrfs: fix lockdep splat with reloc root extent buffers
btrfs: move lockdep class helpers to locking.c
btrfs: unset reloc control if transaction commit fails in prepare_to_relocate()
btrfs: reset RO counter on block group if we fail to relocate
-----BEGIN PGP SIGNATURE-----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=3FeD
-----END PGP SIGNATURE-----
Merge tag '5.20-rc2-ksmbd-smb3-server-fixes' of git://git.samba.org/ksmbd
Pull ksmbd server fixes from Steve French:
- important sparse file fix
- allocation size fix
- fix incorrect rc on bad share
- share config fix
* tag '5.20-rc2-ksmbd-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: don't remove dos attribute xattr on O_TRUNC open
ksmbd: remove unnecessary generic_fillattr in smb2_open
ksmbd: request update to stale share config
ksmbd: return STATUS_BAD_NETWORK_NAME error status if share is not configured
The recent kernel added lost count can be read from either read(2) or
ring buffer data with PERF_SAMPLE_READ. As it's a variable length data
we need to access it according to the format info.
But for perf tools use cases, PERF_FORMAT_ID is always set. So we can
only check PERF_FORMAT_LOST bit to determine the data format.
Add sample_read_value_size() and next_sample_read_value() helpers to
make it a bit easier to access. Use them in all places where it reads
the struct sample_read_value.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220819003644.508916-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It checks a various combination of the read format settings and verify
it return the value in a proper position. The test uses task-clock
software events to guarantee it's always active and sets enabled/running
time.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220819003644.508916-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_counts_values should be increased to read the new lost data.
Also adjust values after read according the read format.
This supports PERF_FORMAT_GROUP which has a different data format but
it's only available for leader events. Currently it doesn't have an API
to read sibling (member) events in the group. But users may read the
sibling event directly.
Also reading from mmap would be disabled when the read format has ID or
LOST bit as it's not exposed via mmap.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220819003644.508916-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
