if we set only lowest mclk level enabled,
when we enable uvd dpm during boot time,
mclk will be fixed in the lowest level.
the mclk switch will fail if try to enable
other level of mclk at this time.
so set all mclk levels enabled.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SRIOV doesn't need clockgating, bypass it.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SRIOV doesn't need CG, so bypass it.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Based on commit "drm/radeon: remove useless and potentially wrong message".
The size of the info printing is incorrect and the PCI subsystems prints
the same info on boot anyway.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The interrupt after FLR is missed sometimes due to hardware reason, so
guest driver get the notification of FLR completion via polling
message. Then host doesn't write VALID bit to avoid sending interrupt,
otherwise the completion will be handled twice.
So there's a valid message without VALID bit for FLR completion,
driver should handle it without checking.
Signed-off-by: Pixel Ding <Pixel.Ding@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Was incorrect for SI.
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
fixed in: "drm/amdgpu:fix race condition"
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Trace on which hub we are doing the flush.
v2: fix typo in commit message
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Trace on which VMHUB we assigned an VMID.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable concurrent VM flushes for Vega10.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For Vega10 we have 18 VM invalidation engines for each VMHUB.
Start to assign them manually to the rings.
v2: add a BUG_ON if we use to many engines
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop invalidating both hubs from each engine.
v2: don't use hardcoded values
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This way GFX and MM won't fight for VMIDs any more.
Initially disabled since we need to stop flushing all HUBS
at the same time as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David suggested this a long time ago, instead of checking
each ring just walk over all the VMIDs in reverse LRU order.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the info which ring belonging to which VMHUB.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now VCE block can work for SRIOV, enable ring & ib test.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add VCE ring test slow workaround for SRIOV.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the initialization sequence of VCE to make VCE work.
Signed-off-by: Frank Min <Frank.Min@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In Tonga's virtualization environment, for firmware UCODE_ID_STORAGE,
there is no actual firmware data, but we still need alloc a BO and
tell the BO's mc address to HW, or world switch will hang on VFs.
v2: fix coding style (Alex)
Signed-off-by: Trigger Huang <trigger.huang@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ASIC_INIT_COMPLETE bit must be cleared during S3 resuming phase,
because VBIOS will check the bit to decide if execute ASIC_Init
posting via kernel driver.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fence buf needs to be used on suspend/resume phase.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sequence is protected by spinlock so don't access sequence
in paramter seq when invoking this function.
~0 means to get the latest sequence number and 0 means none to
get.
Change-Id: Ib7a03f3cf5594deeb4ad333cc59b47a6bddfd1ad
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rework in order to properly support suspend.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rework in order to properly support suspend.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rework in order to properly support suspend.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rework in order to properly support suspend.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rework in order to properly support suspend.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Last drm-misc-next pull req for 4.12
Core changes:
- fb_helper checkpatch cleanup and simplified _add_one_connector() (Thierry)
- drm_ioctl and drm_sysfs improved/gained documentation (Daniel)
- [ABI] Repurpose reserved field in drm_event_vblank for crtc_id (Ander)
- Plumb acquire ctx through legacy paths to avoid lock_all and legacy_backoff
(Daniel)
- Add connector_atomic_check to check conn constraints on modeset (Maarten)
- Add drm_of_find_panel_or_bridge to remove boilerplate in drivers (Rob)
Driver changes:
- meson moved to drm-misc (Neil)
- Added support for Amlogic GX SoCs in dw-hdmi (Neil)
- Rockchip unbind actually cleans up the things bind initializes (Jeffy)
- A couple misc fixes in virtio, dw-hdmi
NOTE: this also includes a backmerge of drm-next as well rc5 (we needed vmwgfx
as well as the new synopsys media formats)
* tag 'drm-misc-next-2017-04-07' of git://anongit.freedesktop.org/git/drm-misc: (77 commits)
Revert "drm: Don't allow interruptions when opening debugfs/crc"
drm: Only take cursor locks when the cursor plane exists
drm/vmwgfx: Fix fbdev emulation using legacy functions
drm/rockchip: Shutdown all crtcs when unbinding drm
drm/rockchip: Reorder drm bind/unbind sequence
drm/rockchip: analogix_dp: Disable clock when unbinding
drm/rockchip: vop: Unprepare clocks when unbinding
drm/rockchip: vop: Enable pm domain before vop_initial
drm/rockchip: cdn-dp: Don't unregister audio dev when unbinding
drm/rockchip: cdn-dp: Don't try to release firmware when not loaded
drm: bridge: analogix: Destroy connector & encoder when unbinding
drm: bridge: analogix: Disable clock when unbinding
drm: bridge: analogix: Unregister dp aux when unbinding
drm: bridge: analogix: Detach panel when unbinding analogix dp
drm: Don't allow interruptions when opening debugfs/crc
drm/virtio: don't leak bo on drm_gem_object_init failure
drm: bridge: dw-hdmi: fix input format/encoding from plat_data
drm: omap: use common OF graph helpers
drm: convert drivers to use drm_of_find_panel_or_bridge
drm: convert drivers to use of_graph_get_remote_node
...
V2: remove **array method, directly fence_put after fence wait.
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <chrstian.koenig@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The offset must be 64bit and add back the accidential dropped line.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By default, the value is set by individual gmc.
if a specific value is input, it overrides the global value for all
v2: create helper funcs
v3: update gmc9 APU's num_level athough it may be updated in the future.
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
At dot clocks > approx. 250 Mhz, some of these calcs will overflow and
cause miscalculation of latency watermarks, and for some overflows also
divide-by-zero driver crash ("divide error: 0000 [#1] PREEMPT SMP" in
"dce_v10_0_latency_watermark+0x12d/0x190").
This zero-divide happened, e.g., on AMD Tonga Pro under DCE-10,
on a Displayport panel when trying to set a video mode of 2560x1440
at 165 Hz vrefresh with a dot clock of 635.540 Mhz.
Refine calculations to avoid the overflows.
Tested for DCE-10 with R9 380 Tonga + ASUS ROG PG279 panel.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Avoid big roundoff errors in scanline/hactive durations for
high pixel clocks, especially for >= 500 Mhz, and thereby
program more accurate display fifo watermarks.
Implemented here for DCE 6,8,10,11.
Successfully tested on DCE 10 with AMD R9 380 Tonga.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Migration to VRAM will break the sharing, resulting in rendering on the exporting GPU never becoming
visible on the importing GPU.
v2: Don't pin BOs to GTT. Instead, refuse to migrate them out of GTT.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Any use of the framebuffer will migrate it to VRAM, which is not sensible for
an imported dma-buf.
v2: Use DRM_DEBUG_KMS to prevent userspace accidentally spamming dmesg.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christopher James Halse Rogers <christopher.halse.rogers@canonical.com>
CC: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A few more things for 4.12:
- ttm and amdgpu support for non-contiguous vram CPU mappings
- lots of bug fixes and cleanups for vega10
- misc bug fixes and code cleanups
[airlied: fix do_div error on 32-bit arm, not sure it's 100% correct]
* 'drm-next-4.12' of git://people.freedesktop.org/~agd5f/linux: (58 commits)
drm/amdgpu: use uintptr_t instead of unsigned long to store pointer
drm/amdgpu: Avoid using signed integer to store pointer value
drm/amdgpu:invoke new implemented AI MB func
drm/amdgpu/vega10:timeout set to equal with VI
drm/amdgpu:implement the reset MB func for vega10
drm/amdgpu:fix typo for mxgpu_ai
drm/amdgpu:no need to involv HDP in KIQ
drm/amdgpu:add PSP block only load_type=PSP (v2)
drm/amdgpu/smu9: update to latest driver interface
drm/amd/amdgpu: cleanup gfx_v9_0_gpu_init()
drm/amd/amdgpu: cleanup gfx_v9_0_rlc_reset()
drm/amd/amdgpu: cleanup gfx_v9_0_rlc_start()
drm/amd/amdgpu: simplify gfx_v9_0_cp_gfx_enable()
drm/amd/amdgpu: cleanup gfx_v9_0_kiq_init_register()
drm/amd/amdgpu: Drop gfx_v9_0_print_status()
drm/amd/amdgpu: cleanup gfx_v9_0_set_gfx_eop_interrupt_state()
drm/amd/amdgpu: cleanup gfx_v9_0_set_priv_reg_fault_state()
drm/amd/amdgpu: cleanup gfx_v9_0_set_priv_inst_fault_state()
drm/amd/amdgpu: cleanup gfx_v9_0_init_queue()
drm/amdgpu: Move function amdgpu_has_atpx near other similar functions
...
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement the sr-iov mailbox for soc15 asics.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
they are lack in the bringup stage, we need them for GPU reset
feature.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1,KIQ won't touch VRAM so no need to involv HDP flush/invalidate at all.
2,According to CP hw designer KIQ better not use any PM4 package lead to wait behave.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SRIOV currently only can load ucode directly, and PSP
block is not supported by VF temporarily.
will remove this restrict and use PSP load all ucode
even for SRIOV later
v2: squash in check against module parameter
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use new WREG32_FIELD15 macro
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use new WREG32_FIELD15 macro
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use new WREG32_FIELD15 macro
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use new WREG32_FIELD macro
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's not used in gfx 6/7/8 so drop it from gfx 9 as well.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use new WREG32_FIELD15 macro.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use new WREG32_FIELD15 macro.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use new WREG32_FIELD15 macro.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce WREG32_FIELD15 macro for SOC15 architectures.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need an array of pointers to IRQ sources, not an array of sources.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Had the wrong sense in the loop
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The two hubs are just instances of the same hardware,
so the register bits are identical.
v2: keep the function pointer
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set reasonable defaults per family.
v2: set both of them in gmc
v3: move vm size and block size in vm manager
v4: squash in warning fix from Alex Xie
v5: squash in min() warning fix
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clean up a toggle with ?:.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Swap read/write pattern for WREG32_FIELD()
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Swap read/write pattern for WREG32_FIELD()
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use new WREG32_FIELD_OFFSET() to clean up code.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The two hubs are just instances of the same hardware,
so the register bits are identical.
v2: only remove get_vm_protection_bits for now
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This avoids merging them together on page fault.
v2: squash in 64-bit division fix
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Atomic helpers really want this instead of the hacked-up legacy
backoff trick, which unfortunately prevents drivers from using their
own private drm_modeset_locks.
Aside: There's a few atomic drivers (nv50, vc4, soon vmwgfx) which
don't yet use the new atomic color mgmt/gamma table stuff. Would be
nice if they could switch over and just hook up
drm_atomic_helper_legacy_gamma_set() instead.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-13-daniel.vetter@ffwll.ch
Implement AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS using TTM_PL_FLAG_CONTIGUOUS
instead of a placement limit. That allows us to better handle CPU
accessible placements.
v2: prevent virtual BO start address from overflowing
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We should probably rename amdgpu_gart_funcs sooner or later.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove some of the extra checks where they don't hurt us.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Abort early if there is nothing todo and correctly indent the "if"s.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The name is a bit confusing and the extra "? true : false" is superflous.
Additional to that remove setting the reset counter directly after checking it.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not used any more.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Try to clean up amdgpu.h.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Match our defines with what the hw uses.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We will probably never see this combination.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows the driver to handle io_mem mappings on their own.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
vega10 is the only soc15 asic at the moment so these
warnings are invalid, but add a default case to silence
the warnings.
Fixes: 220ab9bd1c: "drm/amdgpu: soc15 enable (v3)"
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On KB, KV, CZ we should read the vram width from integrated system
table, if we can. The NOOFCHAN in MC_SHARED_CHMAP is not accurate.
With this change we can enable two 4k displays on CZ again. This use
case was broken sometime in January when we started looking at
vram_width for bandwidth calculations instead of hardcoding this value.
v2:
Return 0 if integrated system info table is not available.
Tested-by: Roman Li <roman.li@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
break it out from the check parameters function.
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We accidentally dereference "cb" if the kmalloc() fails.
Fixes: 451bc8eb8f ("drm/amdgpu: fix PRT teardown on VM fini v3")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Continuing if the GPU fails to resume will end in pain.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This only makes a difference for 32-bit systems. The idea is to have a
fixed virtual address space size with 4-level page tables and to
minimize differences between 32 and 64-bit systems.
v2: Update commit message.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm-misc for 4.12:
Core:
- Removed some fb subsampling dimension checks from core (Ville)
- Some MST slot cleanup (Dhinakaran)
- Extracted drm_debugfs.h & drm_ioctl.h from drmP.h (Daniel)
- Added drm_atomic_helper_shutdown() to compliment suspend/resume counterparts
(Daniel)
- Pipe context through legacy modeset to remove legacy_backoff nasties (Daniel)
- Cleanups around vblank as well as allowing lockless counter reads (Chris W.)
- VGA Switcheroo added to MAINTAINERS with Lukas Wunner as reviewer (Lukas)
Drivers:
- Enhancements to rockchip driver probe (Jeffy) and dsi (Chris Z.)
- Thunderbolt external GPU awareness added (Lukas)
* tag 'drm-misc-next-2017-03-31' of git://anongit.freedesktop.org/git/drm-misc: (63 commits)
apple-gmux: Don't switch external DP port on 2011+ MacBook Pros
drm/nouveau: Don't register Thunderbolt eGPU with vga_switcheroo
drm/amdgpu: Don't register Thunderbolt eGPU with vga_switcheroo
drm/radeon: Don't register Thunderbolt eGPU with vga_switcheroo
PCI: Recognize Thunderbolt devices
MAINTAINERS: Add Lukas Wunner as reviewer for vga_switcheroo
drm: Fix locking gotcha in page_flip ioctl
drm: Clarify the role of plane_state argument to drm_simple update().
drm: Clear e after kfree in drm_mode_page_flip_ioctl
drm: Convert cmpxchg(bool) back to a two step operation
drm/bridge: ti-tfp410: support hpd via gpio
drm: use .hword to represent 16-bit numbers
Revert unrelated part of "drm: simplify the locking in the GETCRTC ioctl"
drm: Fixup failure paths in drm_atomic_helper_set_config
drm: Peek at the current counter/timestamp for vblank queries
drm: Refactor vblank sequence number comparison
drm: vblank cannot be enabled if dev->irq_enabled is false
drm: Mark up accesses of vblank->enabled outside of its spinlock
drm: Make the decision to keep vblank irq enabled earlier
drm/atomic-helper: Remove the backoff hack from set_config
...
An external Thunderbolt GPU can neither drive the laptop's panel nor be
powered off by the platform, so there's no point in registering it with
vga_switcheroo. In fact, when the external GPU is runtime suspended,
vga_switcheroo will cut power to the internal discrete GPU, resulting in
a lockup. Moreover AMD's Windows driver special-cases Thunderbolt as
well.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: http://patchwork.freedesktop.org/patch/msgid/701a8e89ce8ac39734736ab779558b6a4042a19e.1489145162.git.lukas@wunner.de
drivers/gpu/drm/amd/amdgpu/mmhub_v1_0.c:187:2: warning: right shift count >= width of type [enabled by default]
drivers/gpu/drm/amd/amdgpu/gfxhub_v1_0.c:173:2: warning: right shift count >= width of type [enabled by default]
drivers/gpu/drm/amd/amdgpu/vega10_ih.c:106:3: warning: right shift count >= width of type [enabled by default]
v2: Add a space between "&" and "0xff"
Reported by: kbuild-all@01.org
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not sure what the original intention was here, but returning a random piece of
kernel memory to userspace because we didn't set the value at all is clearly
not a good idea.
This patch disallows reading the register and returns
a proper error code instead.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove duplicate mmCP_CPF_BUSY_STAT from the allowed registers.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SRIOV can support for loading ucode with PSP block, enable it.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable pp block if device is vf.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Confirm if sys driver and sOS are already been loaded through sOS
sign register, skip loading sys driver and sOS if finding the sign.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On gfx9 hardware the value is not wrapped and is a 64-bit value. So
we reduce it modulo the ring size.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
(v2) use buf_mask instead of computing on the fly
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the start/end address calculation for address ranges that span
multiple page directories in amdgpu_vm_alloc_levels.
Add error messages if page tables aren't found. Otherwise the page
table update would just fail silently.
v2:
* Change WARN_ON to WARN_ON_ONCE
* Move masking of high address bits to caller
* Add range-check for "from" and "to"
v3:
* Replace WARN_ON_ONCE in get_pt with pr_err in caller
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
adev->family is not initialized yet when amdgpu_get_block_size is
called. Use adev->asic_type instead.
Minimum VM size is 512GB, not 256GB, for a single page table entry
in the root page table.
gmc_v9_0_vm_init is called after adev->vm_manager.max_pfn is
initialized. Move the minimum VM-size enforcement ahead of max_pfn
initializtion. Cast to 64-bit before the left-shift.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With 4-level page tables the maximum VM size is 256TB. That's 64G
pages, which can't be represented in 32-bit.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That register is marked deprecated, reading it results in a bus error.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: fix for all sdma engines
v3: squash in fix for SI/CI
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. security firmware loading has moved to sw init, so this code
is useless.
2. it seems that driver could not call request_firmware on
kernel 2.6, when S3 resume. for request firmware depends on
userspace, at this time, userspace is freeze.
Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When VRAM pressue and trigger huge evictions there is performance drop,
this patch fix it.
Signed-off-by: Roger.He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clean up the VM fault message format and use rate-limiting similar
to other ASICs.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The RB harvest registers are not necessary, the driver already
exposes this info via the info ioctl. GB_BACKEND_MAP has
been deprecated since SI and is not relevant to the RB mapping.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Required for SR-IOV and saves MMIO transactions.
v2: drop cached RB harvest registers
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We check the mem config register to make sure it's been
programmed by the vbios to determine if we need to post
so we check for a non-0 value. However, when the asic
comes out of reset, we may see all ones here, so check
for that too.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1) Adapt to vulkan:
Now use double SWITCH BUFFER to replace the 128 nops w/a,
because when vulkan introduced, umd can insert 7 ~ 16 IBs
per submit which makes 256 DW size cannot hold the whole
DMAframe (if we still insert those 128 nops), CP team suggests
use double SWITCH_BUFFERs, instead of tricky 128 NOPs w/a.
2) To fix the CE VM fault issue when MCBP introduced:
Need one more COND_EXEC wrapping IB part (original one us
for VM switch part).
this change can fix vm fault issue caused by below scenario
without this change:
>CE passed original COND_EXEC (no MCBP issued this moment),
proceed as normal.
>DE catch up to this COND_EXEC, but this time MCBP issued,
thus DE treats all following packages as NOP. The following
VM switch packages now looks just as NOP to DE, so DE
dosen't do VM flush at all.
>Now CE proceeds to the first IBc, and triggers VM fault,
because DE didn't do VM flush for this DMAframe.
3) change estimated alloc size for gfx9.
with new DMAframe scheme, we need modify emit_frame_size
for gfx9
4) No need to insert 128 nops after gfx8 vm flush anymore
because there was double SWITCH_BUFFER append to vm flush,
and for gfx7 we already use double SWITCH_BUFFER following
after vm_flush so no change needed for it.
5) Change emit_frame_size for gfx8
v2: squash in BUG removal from Monk
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
those MC_VM registers won't be programed by VBIOS in VF
so driver is responsible to programe them.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ring_write_multiple should use buf_mask instead of ptr_mask
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for SRIOV we cannot use access register when in IRQ routine
with regular KIQ method
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
no CG for SRIOV on SOC15
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
no hw_fini for SRIOV, otherwise other VF will be affected
no CG for SRIOV
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
must set minor_update.enable before write smaller value
to wptr/doorbell, so for sriov we need set that register
bit in hw_init period.
this could fix the SDMA ring test fail after guest reboot
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ring->buf_mask need be set prior to ring_clear_ring invoke
and fix ring_clear_ring as well which should use buf_mask
instead of ptr_mask
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this must be invoked during early init
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Apply the new IB during IB emit for SRIOV with MCBP
v2: agd: use define instead of magic number
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
set bit 21 of IB.control filed to actually enable
MCBP for SRIOV
v2:
add flag for preemption enable bit for soc15 and use
this flag instead of hardcode.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when MCBP enabled for gfx8, the cond_exec must also
be implemented, otherwise there will be odds to meet
cross engine (ce and me) deadlock when world switch
happens.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1,the check is only appliable for SRIOV GFX engine.
2,use chunk_ib instead of ib.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Ken Wang <Qingqing.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
to prevent submit two or more IBs with PREEMPT flags.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
should use chunk_ib instead of ib, otherwise the logic
is incorrect.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Ken Wang <Qingqing.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also, add the fence of the clear operations to the BO to ensure that
the underlying memory can only be re-used after all PTEs pointing to
it have been cleared.
This avoids the following sequence of events that could be triggered
by user space:
1. Submit a CS that accesses some BO _without_ adding that BO to the
buffer list.
2. Free that BO.
3. Some other task re-uses the memory underlying the BO.
4. The CS is submitted to the hardware and accesses memory that is
now already in use by somebody else.
By clearing the page tables immediately in step 2, a GPU VM fault will
be triggered in step 4 instead of wild memory accesses.
v2: use amdgpu_bo_fence directly
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allocate and free page directories on demand.
V2:
a. clear entries allocation
b. fix entries index calculation
c. need alloc sub level even parent bo was allocated
Signed-off-by: Christian König <christian.koenig@amd.com> (v1)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> (v2)
Acked-by: Alex Deucher <alexander.deucher@amd.com> (v2)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not the best solution, but good enough for now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update all levels of the page directory.
V2:
a. sub level pdes always are written to incorrect place.
b. sub levels need to update regardless of parent updates.
Signed-off-by: Christian König <christian.koenig@amd.com> (V1)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (V1)
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> (V2)
Acked-by: Alex Deucher <alexander.deucher@amd.com> (V2)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move all levels to the end after command submission.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All page directory levels should be in place after this.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allows us to get the size for all levels as well.
v2: agd: fix warning
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No functional change, but the base for multi level page tables.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Needs to be filled with handling.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This way we save passing it through the different functions.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Decribes better what this is used for.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ring structure already has what we need.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoids passing around additional parameters during setup.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Everything we need is in the ring structure. No need to
pass all the bits explicitly.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To better match where they are used. Called from sw_init
and sw_fini.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For MM sriov, need use MMSCH to init engine and the init procedures
are all saved in mm table.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For MM SRIOV, need to prepare MM table send send it to MMSCH to
initial UVD & VCE engine. Create new header file for the structures.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In order to not break SRIOV gfx development, will revert
this patch after vce proved working.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allocate MM table for sriov device.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new structure for MM table for multi media scheduler of sriov.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
disable uvd for sriov temporarily.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCE SRIOV need use doorbell and only works on VCN0 ring now
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SRIOV, MM don't need to care about PG & CG, skip it.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable virtual displays if the user has enabled them via the
kernel command line. Useful in virtual or headless environments.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VF need virtual dce, enable it if device is vf.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If gpu device is vf, set virt ops so that guest can talk with GPU
hypervisor.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement mailbox protocol for AI so that guest vf can communicate
with GPU hypervisor.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If enable DPM for VF, always get lot of warn_slow_patch_null in
dmesg and vf doesn't support DPM.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
two reasons:
1. there is a spinlock around;
2. vm register is pf/vf copy, vf can access via mmio safely.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rework sdma init to support SR-IOV.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
one issue unresolved for RLC:
rlc will go wrong completely if there is a soft_reset
before RLC ucode loading.
to workaround above issue, we can totally ignore RLC
in guest driver side due to there was already full
initialization on RLC side by GIM
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Insert ce meta prior to cntx_cntl and de follow it.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
it is needed for virtualization
v2: squash in wptr value fix
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Init kiq via cpu mmio and init kcq through kiq.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fullfill KIQ irq funcs to support kiq interrupt.
v2: squash in adding interrupt src
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fullfill kiq funcs to support kiq ring.
v2: squash in 64bit ptr fix
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allocate KIQ ring in sw_init for gfx9.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Read vega10 hw register to detect if sriov is enabled, and call
it before IP blocks setting.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Required for SR-IOV.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: add AMD_EXP_HW_SUPPORT for now
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add soc15 support and enable all the IPs for vega10.
v2: squash in xclk fix
v3: disable HDP MGCG
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds power management support for vega10.
v2: squash in fan control and led config fixes from Rex
v3: squash in dead code removal and socvid fixes from Rex
v4: squash in dpm force level fix from Rex
v5: squash in latest headless, gpu load fixes from Rex
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PSP is responsible for firmware loading on SOC-15 asics.
v2: fix memory leak (Ken)
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
