This patch fixes the DP AUX CH timeouts observed during CI runs causing
CI Failures on a specific PCI device. This issue was fixed previously
by adding a quirk but looks like we need to increase this delay even more
in order to get rid all the DP AUX CH timeouts.
Fixes: c99a259b4b ("drm/i915/edp: Add a T12 panel delay quirk to fix
DP AUX CH timeouts")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101144
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1502823591-25310-1-git-send-email-manasi.d.navare@intel.com
(cherry picked from commit e8f345e08d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
By using drm_gem_flink/drm_gem_open on an object using the same fd, it
is possible for a client to create multiple handles pointing to the same
object (tied to the same contexts and VMA), as exemplified by
igt::gem_handle_to_libdrm_bo(). Since this duplication has been possible
since forever, we cannot assume that the handle:(fpriv, object) is
unique and so must handle the multiple users of a single VMA.
v2: Added commentary noise.
Testcase: igt/gem_close
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102355
Fixes: d1b48c1e71 ("drm/i915: Replace execbuf vma ht with an idr")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170822110517.22277-3-chris@chris-wilson.co.uk
Tested-by: Marta Lofstedt <marta.lofstedt@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry-picked from commit 3ffff01749)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The CCS won't have the same stride as the main surface anyway so trying
to guard against the fence stride not matching the CCS stride is
not sensible. Just skip the fence vs. fb alignment check for the aux
plane.
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170824191100.10949-3-ville.syrjala@linux.intel.com
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Fixes: 2e2adb0573 ("drm/i915: Add render decompression support")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 2ec4cf4057)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Userspace wants to treat fb->offsets[] as raw byte offsets into the gem
bo. Adjust the kernel code to match.
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170824191100.10949-2-ville.syrjala@linux.intel.com
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Fixes: 2e2adb0573 ("drm/i915: Add render decompression support")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 303ba69554)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since we hold the device wakeref when writing through the GTT (otherwise
the writes would fail), we presumed that before the device sleeps those
writes would naturally be flushed and that we wouldn't need our mmio
read trick. However, that presumption seems false and a sleepy bxt seems
to require us to always manually flush the GTT writes prior to direct
access.
Fixes: e2a2aa36a5 ("drm/i915: Check we have an wake device before flushing GTT writes")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829192546.1087-1-chris@chris-wilson.co.uk
(cherry picked from commit b69a784f5e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Sometimes we know we are the only user of the bo, but since we take a
protective pin_pages early on, an attempt to change the vmap on the
object is denied because it is busy. i915_gem_object_pin_map() cannot
tell from our single pin_count if the operation is safe. Instead we must
pass that information down from the caller in the manner of
I915_MAP_OVERRIDE.
This issue has existed from the introduction of the mapping, but was
never noticed as the only place where this conflict might happen is for
cached kernel buffers (such as allocated by i915_gem_batch_pool_get()).
Until recently there was only a single user (the cmdparser) so no
conflicts ever occurred. However, we now use it to allocate batches for
different operations (using MAP_WC on !llc for writes) in addition to the
existing shadow batch (using MAP_WB for reads).
We could either keep both mappings cached, or use a different write
mechanism if we detect a MAP_WB already exists (i.e. clflush
afterwards), but as we haven't seen this issue in the wild (it requires
hitting the GPU reloc path in addition to the cmdparser) for simplicity
just allow the mappings to be recreated.
v2: Include the i915_MAP_OVERRIDE bit in the enum so the compiler knows
about all the valid values.
Fixes: 7dd4f6729f ("drm/i915: Async GPU relocation processing")
Testcase: igt/gem_lut_handle # byt, completely by accident
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170828104631.8606-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit a575c67617)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since we use a worker to enable FBC on the CRTC, it is possible for the
CRTC to be switched off before we run. In this case, the CRTC will not
allow us to wait upon a vblank, so remove the DRM_ERROR as this is very
much expected.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102410
Fixes: ca18d51d77 ("drm/i915/fbc: wait for a vblank instead of 50ms when enabling")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170825150215.19236-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 908b6e6e8a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
vmwgfx add fence fd support.
* 'drm-vmwgfx-next' of git://people.freedesktop.org/~syeh/repos_linux:
drm/vmwgfx: Bump the version for fence FD support
drm/vmwgfx: Add export fence to file descriptor support
drm/vmwgfx: Add support for imported Fence File Descriptor
drm/vmwgfx: Prepare to support fence fd
drm/vmwgfx: Fix incorrect command header offset at restart
drm/vmwgfx: Support the NOP_ERROR command
drm/vmwgfx: Restart command buffers after errors
drm/vmwgfx: Move irq bottom half processing to threads
drm/vmwgfx: Don't use drm_irq_[un]install
- Provide NV12MT pixel format support of Mixer driver in generic way.
- Refactor Exynos KMS drivers
. Refactoring to panel detection way
. Refactoring to setting up possible_crtcs
. Refactoring to video and command mode support
- Some cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=JZ8z
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Summary:
- Provide NV12MT pixel format support of Mixer driver in generic way.
- Refactor Exynos KMS drivers
. Refactoring to panel detection way
. Refactoring to setting up possible_crtcs
. Refactoring to video and command mode support
- Some cleanups
* tag 'exynos-drm-next-for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: simplify set_pixfmt() in DECON and FIMD drivers
drm/exynos: consistent use of cpp
drm/exynos: mixer: remove src offset from mixer_graph_buffer()
drm/exynos: mixer: simplify mixer_graph_buffer()
drm/exynos: mixer: simplify vp_video_buffer()
drm/exynos: mixer: enable NV12MT support for the video plane
drm/exynos: mixer: fix chroma comment in vp_video_buffer()
arm64: dts: exynos: remove i80-if-timings nodes
dt-bindings: exynos5433-decon: remove i80-if-timings property
drm/exynos/decon5433: use mode info stored in CRTC to detect i80 mode
drm/exynos: add mode_valid callback to exynos_drm
drm/exynos/decon5433: refactor irq requesting code
drm/exynos/mic: use mode info stored in CRTC to detect i80 mode
drm/exynos/dsi: propagate info about command mode from panel
drm/exynos/dsi: refactor panel detection logic
drm/exynos: use helper to set possible crtcs
drm/exynos/decon5433: use readl_poll_timeout helpers
UAPI Changes:
- Rename u32 to __u32 in struct drm_format_modifier_blob (Lionel)
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
* tag 'drm-misc-next-fixes-2017-08-28' of git://anongit.freedesktop.org/git/drm-misc:
drm: rename u32 in __u32 in uapi
This IOCTL provides a mechanism for userspace to trigger a sync object
directly. There are other ways that userspace can trigger a syncobj
such as submitting a dummy batch somewhere or hanging on to a triggered
sync_file and doing an import. This just provides an easy way to
manually trigger the sync object without weird hacks.
The motivation for this IOCTL is Vulkan fences. Vulkan lets you create
a fence already in the signaled state so that you can wait on it
immediatly without stalling. We could also handle this with a new
create flag to ask the driver to create a syncobj that is already
signaled but the IOCTL seemed a bit cleaner and more generic.
v2:
- Take an array of sync objects (Dave Airlie)
v3:
- Throw -EINVAL if pad != 0
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This just resets the dma_fence to NULL so it looks like it's never been
signaled. This will be useful once we add the new wait API for allowing
wait on "submit and signal" behavior.
v2:
- Take an array of sync objects (Dave Airlie)
v3:
- Throw -EINVAL if pad != 0
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: Dave Airlie <airlied@redhat.com>
The wait ioctl has a bunch of code to read an syncobj handle array from
userspace and turn it into an array of syncobj pointers. We're about to
add two new IOCTLs which will need to work with arrays of syncobj
handles so let's make some helpers.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Vulkan VkFence semantics require that the application be able to perform
a CPU wait on work which may not yet have been submitted. This is
perfectly safe because the CPU wait has a timeout which will get
triggered eventually if no work is ever submitted. This behavior is
advantageous for multi-threaded workloads because, so long as all of the
threads agree on what fences to use up-front, you don't have the extra
cross-thread synchronization cost of thread A telling thread B that it
has submitted its dependent work and thread B is now free to wait.
Within a single process, this can be implemented in the userspace driver
by doing exactly the same kind of tracking the app would have to do
using posix condition variables or similar. However, in order for this
to work cross-process (as is required by VK_KHR_external_fence), we need
to handle this in the kernel.
This commit adds a WAIT_FOR_SUBMIT flag to DRM_IOCTL_SYNCOBJ_WAIT which
instructs the IOCTL to wait for the syncobj to have a non-null fence and
then wait on the fence. Combined with DRM_IOCTL_SYNCOBJ_RESET, you can
easily get the Vulkan behavior.
v2:
- Fix a bug in the invalid syncobj error path
- Unify the wait-all and wait-any cases
v3:
- Unify the timeout == 0 case a bit with the timeout > 0 case
- Use wait_event_interruptible_timeout
v4:
- Use proxy fence
v5:
- Revert to a combination of v2 and v3
- Don't use proxy fences
- Don't use wait_event_interruptible_timeout because it just adds an
extra layer of callbacks
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This requests that the driver create the sync object such that it
already has a signaled dma_fence attached. Because we don't need
anything in particular (just something signaled), we use a dummy null
fence. This is useful for Vulkan which has a similar flag that can be
passed to vkCreateFence.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
It is useful in certain circumstances to know when the fence is replaced
in a syncobj. Specifically, it may be useful to know when the fence
goes from NULL to something valid. This does make syncobj_replace_fence
a little more expensive because it has to take a lock but, in the common
case where there is no callback list, it spends a very short amount of
time inside the lock.
v2:
- Don't lock in drm_syncobj_fence_get. We only really need to lock
around fence_replace to make the callback work.
v3:
- Fix the cb_list comment to make kbuild happy
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This interface will allow sync object to be used to back
Vulkan fences. This API is pretty much the vulkan fence waiting
API, and I've ported the code from amdgpu.
v2: accept relative timeout, pass remaining time back
to userspace.
v3: return to absolute timeouts.
v4: absolute zero = poll,
rewrite any/all code to have same operation for arrays
return -EINVAL for 0 fences.
v4.1: fixup fences allocation check, use u64_to_user_ptr
v5: move to sec/nsec, and use timespec64 for calcs.
v6: use -ETIME and drop the out status flag. (-ETIME
is suggested by ickle, I can feel a shed painting)
v7: talked to Daniel/Arnd, use ktime and ns everywhere.
v8: be more careful in the timeout calculations
use uint32_t for counter variables so we don't overflow
graciously handle -ENOINT being returned from dma_fence_wait_timeout
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The atomic exchange operation in drm_syncobj_replace_fence is sufficient
for the case where it races with itself. However, if you have a race
between a replace_fence and dma_fence_get(syncobj->fence), you may end
up with the entire replace_fence happening between the point in time
where the one thread gets the syncobj->fence pointer and when it calls
dma_fence_get() on it. If this happens, then the reference may be
dropped before we get a chance to get a new one. The new helper uses
dma_fence_get_rcu_safe to get rid of the race.
This is also needed because it allows us to do a bit more than just get
a reference in drm_syncobj_fence_get should we wish to do so.
v2:
- RCU isn't that scary
- Call rcu_read_lock/unlock
- Don't rename fence to _fence
- Make the helper static inline
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: Dave Airlie <airlied@redhat.com>
The function has far more in common with drm_syncobj_find than with
any in the get/put functions.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: Dave Airlie <airlied@redhat.com>
Currently the hikey dsi logic cannot generate accurate byte
clocks values for all pixel clock values. Thus if a mode clock
is selected that cannot match the calculated byte clock, the
device will boot with a blank screen.
This patch uses the new mode_valid callback (many thanks to
Jose Abreu for upstreaming it!) to ensure we don't select
modes we cannot generate.
Also, since the ade crtc code will adjust the mode in mode_set,
this patch also adds a mode_fixup callback which we use to make
sure we are validating the mode clock that will eventually be
used.
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Xinliang Liu <xinliang.liu@linaro.org>
Cc: Xinliang Liu <z.liuxinliang@hisilicon.com>
Cc: Rongrong Zou <zourongrong@gmail.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Xinliang Liu <xinliang.liu@linaro.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Minor version bump to indicate support for fence FD
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Singh Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Added code to link a fence to a out_fence_fd file descriptor and
thread out_fence_fd down to vmw_execbuf_copy_fence_user() so it can be
copied into the IOCTL reply and be passed back up the the user.
v2:
Make sure to sync and clean up in case of failure
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Singh Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
This allows vmwgfx to wait on a fence created by another
device.
v2:
* Remove special handling for vmwgfx fence and just use dma_fence_wait()
* Use interruptible waits
* Added function documentation
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Singh Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Make the fields and flags available.
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Deepak Singh Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Sometimes it appears like the device modifies the command header offset
member. So explicitly clear it when restarting after an error.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Can be used by user-space applications to test and verify the kernel
command buffer error recovery functionality.
Malicious user-space apps could potentially use this command to slow down
graphics processing somewhat, but they could also accomplish the same thing
using a random malformed command so this should be considered safe.
At least as safe as it gets.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Previously we skipped the command buffer and added an extra fence to
avoid hangs due to skipped fence commands.
Now we instead restart the command buffer after the failing command,
if there are any commands left.
In addition we print out some information about the failing command
and its location in the command buffer.
Testing Done: ran glxgears using mesa modified to send the NOP_ERROR
command before each 10th clear and verified that we detected the device
error properly and that there were no other device errors caused by
incorrectly ordered command buffers. Also ran the piglit "quick" test
suite which generates a couple of device errors and verified that
they were handled as intended.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
This gets rid of the irq bottom half tasklets and instead performs the
work needed in process context. We also convert irq-disabling spinlocks to
ordinary spinlocks.
This should decrease system latency for other system components, like
sound for example but has the potential to increase latency for processes
that wait on the GPU.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
We're not allowed to change the upstream version of the drm_irq_install
function to be able to incorporate threaded irqs. So roll our own irq
install- and uninstall functions instead of relying on the drm core ones.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
All other fields use __
Cc: Ben Widawsky <ben@bwidawsk.net>
Fixes: db1689aa61 ("drm: Create a format/modifier blob")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170824150814.5878-1-lionel.g.landwerlin@intel.com
A recent commit (272725c7db) has removed
the use of 'bits_per_pixel' in DRM. However the corresponding Exynos
driver code still uses the ambiguous 'bpp', even though it is now
initialized from fb->cpp[0].
Consistenly use 'cpp' in FIMD, DECON7 and DECON5433 drivers.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
We always translate the dma address such that the offsets of
the source image are zero. Hence we can remove manipulation of
the MXR_GRAPHIC_SXY(win) register and just zero them once
in mixer_win_reset().
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
DRM core already checks in drm_atomic_plane_check() if the
pixelformat is valid. Hence we can collapse the default case
of the switch statement with the XRGB8888 case.
No functional change.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
DRM core already checks in drm_atomic_plane_check() if the
pixelformat is valid. Hence we can drop the default case of
the switch statement and collapse most of the code.
Also rename the two booleans to reflect what true/false
actually means, and to avoid mixing CrCb/NV21 descriptions.
No functional change.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The video processor supports a tiled version of the NV12 format,
known as NV12MT in V4L2 terms. The support was removed in commit
083500baef due to not being a real
pixel format, but rather NV12 with a special memory layout.
With the introduction of FB modifiers, we can now properly support
this format again.
Tested with a hacked up modetest from libdrm's test suite on
an ODROID-X2 (Exynos4412).
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The current comment sounds like the division op is done to
compensate for some hardware erratum. But the chroma plane
having half the height of the luma plane is just the way
NV12/NV21 is defined, so clarify this behaviour.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Since i80/command mode is determined in runtime by propagating info
from panel this property can be removed.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Since i80/command mode is determined in runtime by propagating info
from panel this property can be removed.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Since panel's mode of work is propagated properly from panel to DECON,
there is no need to use redundant private device tree property.
The only issue with such approach is that check for required interrupts
should be postponed until panel communicate its requirements, ie to
mode validation phase - mode_valid callback.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
crtc::mode_valid callback is required to implement proper pipeline
validation for command/video modes. Since Exynos uses private
framework such callback should be added to it.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
To allow runtime validation of mode of work irq request
code should be split into two separate phases:
- irq reqesting,
- irq checking.
Following patches will move 2nd phase to mode validation phase.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
MIC driver should use info from CRTC to check mode of work instead of
illegally peeking into nodes of other devices.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
mipi_dsi framework provides information about panel's mode of work.
This info should be propagated upstream to configure all elements of
the pipeline. As CRTC is the common denominator of the pipeline we can
put such info into its structures.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Description of drm_helper_hpd_irq_event clearly states that drivers
supporting hotplug events per connector should use different helper -
drm_kms_helper_hotplug_event. To achieve it following changes have
been performed:
- moved down all DSI ops - they require exynos_dsi_disable function
to be defined earlier,
- simplified exynos_dsi_detect - there is no real detection, it just
returns if panel is attached,
- DSI attach/detach callbacks attaches/detaches DRM panel and sets
connector status and other context fields accordingly, all this is
performed under mutex, as these callbacks are asynchronous.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
All encoders share the same code to set encoders possible_crtcs field.
The patch creates helper to abstract out this code.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Linux core provide helpers for polling with timeout, lets use them.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
A single patch switching to a new OF helper.
-----BEGIN PGP SIGNATURE-----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=lksW
-----END PGP SIGNATURE-----
Merge tag 'sunxi-drm-for-4.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next
sun4i DRM changes for 4.14, take 2
A single patch switching to a new OF helper.
* tag 'sunxi-drm-for-4.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
drm/sun4i: use of_graph_get_remote_endpoint()
* fix compilation when compiling omapfb driver
* WA for OMAP3 endless sync lost issue
* WA for OMAP5 DSI PLL issue
* fix analog TV out modecheck
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9KX4
-----END PGP SIGNATURE-----
Merge tag 'omapdrm-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next
omapdrm fixes for 4.14
* fix compilation when compiling omapfb driver
* WA for OMAP3 endless sync lost issue
* WA for OMAP5 DSI PLL issue
* fix analog TV out modecheck
* tag 'omapdrm-4.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
ARM: OMAP2+: fix missing variable declaration
drm/omap: work-around for omap3 display enable
drm/omap: fix i886 work-around
drm/omap: fix analog tv-out modecheck
