In preparation to more carefully handling incomplete preemption during
reset by execlists, we move the existing code wholesale to the backends
under a couple of new reset vfuncs.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
CC: Michel Thierry <michel.thierry@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: Jeff McGee <jeff.mcgee@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180516183355.10553-4-chris@chris-wilson.co.uk
As a complement to inject_preempt_context(), follow up with the function
to handle its completion. This will be useful should we wish to extend
the duties of the preempt-context for execlists.
v2: And do the same for the guc.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Jeff McGee <jeff.mcgee@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20180516183355.10553-3-chris@chris-wilson.co.uk
When setting up reset, we may need to recursively prepare an engine. In
which case we should only synchronously flush the tasklets on the outer
most call, the inner calls will then be inside an atomic section where
the tasklet will never be run (and so the sync will never complete).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180516183355.10553-2-chris@chris-wilson.co.uk
The idea was to try and let the existing tasklet run to completion
before we began the reset, but it involves a racy check against anything
else that tries to run the tasklet. Rather than acknowledge and ignore
the race, let it be and don't try and be too clever.
The tasklet will resume execution after reset (after spinning a bit
during reset), but before we allow it to resume we will have cleared all
the pending state.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180516183355.10553-1-chris@chris-wilson.co.uk
When switching to the kernel context, we force the switch to occur after
all currently active requests (so that we know the GPU won't switch
immediately away and the kernel context remains current as we work). To
do so we have to inspect all the timelines and add a fence from the
active work to queue our switch afterwards. We can use the tracked set
of active rings to shrink our search for active timelines.
v2: Use a local to shrink the list_for_each_entry()
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180515143149.4795-1-chris@chris-wilson.co.uk
When we process the outstanding requests upon banning a context, we need
to acquire both the engine and the client's timeline, nesting the locks.
This requires explicit markup as the two timelines are now of the same
class, since commit a89d1f921c ("drm/i915: Split i915_gem_timeline into
individual timelines").
Testcase: igt/gem_eio/banned
Fixes: a89d1f921c ("drm/i915: Split i915_gem_timeline into individual timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180512084957.9829-1-chris@chris-wilson.co.uk
The original switch to use CSB from the HWSP was plagued by the effect
of read ordering on VT-d; we would read the WRITE pointer from the HWSP
before it had completed writing the CSB contents. The mystery comes down
to the lack of rmb() for correct ordering with respect to the writes
from HW, and with that resolved we can remove the VT-d special casing.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511121147.31915-3-chris@chris-wilson.co.uk
Tested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
This reverts commit 11474e9091.
There are issues which will block the host preemption before, instead of
disabling it use one workaround "setting max priority for gvt context"
to avoid the gvt context be preempted by the host. Now the issues have been
cleared, so revert this patch to enable host preemption.
v2:
- refine description(Zhenyu)
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
the cmd_reg_handler() is called by cmds LRM, PIPE_CTRL, SRM...
for LRM, SRM, we cannot get write data in a simple way.
On other side, the force_to_nonpriv reigsters will only be written in LRI
in current drivers. so we don't want to bother the handler to handle those
memory access cmds, just leave a print message here.
Signed-off-by: Zhao Yan <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Return error will cause vm hang and enter failsafe mode.
However, we don't want that happen on detecting an wrong force_to_nonpriv
register write.
Therefore, we just omit the wrong write or patch it to default value.
v2: only return 0 on detecting lri write of registers outside whitelist,
but still return error on other error conditions. (zhenyu wang)
Signed-off-by: Zhao Yan <yan.y.zhao@intel.com>
Reviewed-by: Zhang Yulei <yulei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Each ring has a NOPID register and currently they are regarded as default
value of force_to_nonpriv registers in guest drivers
Signed-off-by: Zhao Yan <yan.y.zhao@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The disable_warn_untrack never prevent gvt from printing untracked
mmio errors. We were disturbed by this error storm and the fix is
just adding them to the list with no essential new change.
This message is only useful for enabling new platform during
developing process. So lower the message level to debug and then
remove disable_warn_untrack.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
We write all 4K page entries, even when using 64K pages. In order to
verify that the HW isn't cheating by using the 4K PTE instead of the 64K
PTE, we want to remove all the surplus entries. If the HW skipped the
64K PTE, it will read/write into the scratch page instead - which we
detect as missing results during selftests.
v2: much improved commentary (Chris)
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Changbin Du <changbin.du@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511095140.25590-1-matthew.auld@intel.com
Before we unpin the buffer used for OA reports and return it to the
system, we need to be sure that the HW has finished writing into it.
For lack of a better idea, poll OACONTROL to check it is switched off.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106379
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511135207.12880-1-chris@chris-wilson.co.uk
In the previous patch (to include a rmb() after readig the CSB WRITE
pointer from the HWSP) we believe we have fixed the underlying bug, and
so can re-enable using the HWSP on Cannolake.
This reverts commit 61bf9719fa ("drm/i915/cnl: Use mmio access to
context status buffer").
References: https://bugs.freedesktop.org/show_bug.cgi?id=105888
References: https://bugs.freedesktop.org/show_bug.cgi?id=106185
References: 61bf9719fa ("drm/i915/cnl: Use mmio access to context status buffer")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Timo Aaltonen <tjaalton@ubuntu.com>
Tested-by: Timo Aaltonen <tjaalton@ubuntu.com>
Acked-by: Michel Thierry <michel.thierry@intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511121147.31915-2-chris@chris-wilson.co.uk
We assume that the CSB is written using the normal ringbuffer
coherency protocols, as outlined in kernel/events/ring_buffer.c:
* (HW) (DRIVER)
*
* if (LOAD ->data_tail) { LOAD ->data_head
* (A) smp_rmb() (C)
* STORE $data LOAD $data
* smp_wmb() (B) smp_mb() (D)
* STORE ->data_head STORE ->data_tail
* }
So we assume that the HW fulfils its ordering requirements (B), and so
we should use a complimentary rmb (C) to ensure that our read of its
WRITE pointer is completed before we start accessing the data.
The final mb (D) is implied by the uncached mmio we perform to inform
the HW of our READ pointer.
References: https://bugs.freedesktop.org/show_bug.cgi?id=105064
References: https://bugs.freedesktop.org/show_bug.cgi?id=105888
References: https://bugs.freedesktop.org/show_bug.cgi?id=106185
Fixes: 767a983ab2 ("drm/i915/execlists: Read the context-status HEAD from the HWSP")
References: 61bf9719fa ("drm/i915/cnl: Use mmio access to context status buffer")
Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Timo Aaltonen <tjaalton@ubuntu.com>
Tested-by: Timo Aaltonen <tjaalton@ubuntu.com>
Acked-by: Michel Thierry <michel.thierry@intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180511121147.31915-1-chris@chris-wilson.co.uk
Avoids a hang during soft reset.
v2: Rebased on top of the WA refactoring
v3: Added References (Mika)
v4:
- Rebased
- C, not lisp (Chris)
- Which steppings affected by this are not clear.
For the moment, apply unconditionally as per the
BSpec (Mika)
- Add reference to another HSD also related
References: HSDES#1405476379
References: HSDES#2006612137
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-14-git-send-email-oscar.mateo@intel.com
Disable CGPSF unit clock gating to prevent an issue.
v2: Rebased on top of the WA refactoring
v3: Added References (Mika)
v4:
- Rebased
- C, not lisp (Chris)
- Remove unintentional whitespaces (Mika)
- Fixed in C0 (Mika)
References: HSDES#1406838659
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-13-git-send-email-oscar.mateo@intel.com
Disable I2M Write for performance reasons.
v2: Rebased on top of the WA refactoring
v3: Added References (Mika)
v4:
- Rebased
- C, not lisp (Chris)
- GEN7 chicken bit in the wrong side of the fence (Mika)
- Use two spaces to align bit macros
References: HSDES#1604302699
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-12-git-send-email-oscar.mateo@intel.com
Disable GWL clock gating to prevent an issue that might
cause hangs.
v2: Rebased on top of the WA refactoring
v3: Wa_2201832410 officially merged with Wa_1406680159
v4: Added References (Mika)
v5:
- Rebased
- C, not lisp (Chris)
- Add reference where WA is better explained (Rodrigo)
- Add reference to WA that got merged with this
References: HSDES#1406681710
References: HSDES#1406680159
References: HSDES#2201832410
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-11-git-send-email-oscar.mateo@intel.com
Disable MSC clock gating to prevent data corruption.
BSpec: 19257
v2: Rebased on top of the WA refactoring
v3: Added References (Mika)
v4:
- Rebased
- C, not lisp (Chris)
- A0 only (Mika)
References: HSDES#1405779004
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-10-git-send-email-oscar.mateo@intel.com
Revert to the legacy implementation to avoid a system hang.
v2: Correct the address for GAMW_ECO_DEV_RW_IA_REG
v3: Renamed to Wa_220166154
v4: Rebased on top of the WA refactoring
v5: Added References (Mika)
v6:
- Rebased
- C, not lisp (Chris)
References: HSDES#220166154
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-9-git-send-email-oscar.mateo@intel.com
This workarounds an issue with insufficient storage for the
CL2 and SF units.
v2: Renamed to Wa_1405766107
v3: Wrapped the commit message
v4: Rebased on top of the WA refactoring
v5: Added References (Mika)
v6:
- Rebased
- s/MACALLOC/MAXALLOC (Mika)
- C, not lisp (Chris)
References: HSDES#1405766107
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-8-git-send-email-oscar.mateo@intel.com
Avoids an undefined LLC behavior.
BSpec: 9613
v2: Renamed to Wa_1405733216
v3: Spaces around '<<' and fix surrounding code
v4: Rebased on top of the WA refactoring
v5: Added References (Mika)
v6:
- Rebased
- C, not lisp (Chris)
References: HSDES#1405733216
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-7-git-send-email-oscar.mateo@intel.com
Adjust default GAM TLB partitioning for performance reasons.
v2: Only touch the bits that we really need
v3: Rebased on top of the WA refactoring
v4:
- Added References (Mika)
- Rebased
v5:
- Rebased
- C, not lisp (Chris)
- Correct reference number (Mika)
References: HSDES#220160670
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-6-git-send-email-oscar.mateo@intel.com
Revert to an L3 non-hash model, for performance reasons.
v2:
- Place the WA name above the actual change
- Improve the register naming
v3:
- Rebased
- Renamed to Wa_1604223664
v4: Rebased on top of the WA refactoring
v5:
- Added References (Mika)
- Fixed wrong mask and value (Mika)
- Do not apply together with another WA for the same
register (not worth the hassle)
v6:
- Rebased
- C, not lisp (Chris)
References: HSDES#1604223664
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-5-git-send-email-oscar.mateo@intel.com
The default GAPZ arbitrer priority value at power-on has been found
to be incorrect.
v2: Now renamed to Wa_1405543622
v3: Rebased on top of the WA refactoring
v4: Added HSDES reference number (Mika)
v5:
- Rebased
- C, not lisp (Chris)
References: HSDES#1405543622
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-4-git-send-email-oscar.mateo@intel.com
Sampler Dynamic Frequency Rebalancing (DFR) aims to reduce Sampler
power by dynamically changing its clock frequency in low-throughput
conditions. This patches enables it by default on Gen11.
v2: Wrong operation to clear the bit (Praveen)
v3: Rebased on top of the WA refactoring
v4: Move to icl_init_clock_gating, since it's not a WA (Rodrigo)
v5: C, not lisp (Chris)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Praveen Paneri <praveen.paneri@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-3-git-send-email-oscar.mateo@intel.com
Inherit workarounds from previous platforms that are still valid for
Icelake.
v2: GEN7_ROW_CHICKEN2 is masked
v3:
- Since it has been fixed already in upstream, removed the TODO
comment about WA_SET_BIT for WaInPlaceDecompressionHang.
- Squashed with this patch:
drm/i915/icl: add icelake_init_clock_gating()
from Paulo Zanoni <paulo.r.zanoni@intel.com>
- Squashed with this patch:
drm/i915/icl: WaForceEnableNonCoherent
from Oscar Mateo <oscar.mateo@intel.com>
- WaPushConstantDereferenceHoldDisable is now Wa_1604370585 and
applies to B0 as well.
- WaPipeControlBefore3DStateSamplePattern WABB was being applied
to ICL incorrectly.
v4:
- Wrap the commit message
- s/dev_priv/p to please checkpatch
v5: Rebased on top of the WA refactoring
v6: Rebased on top of further whitelist registers refactoring (Michel)
v7: Added WaRsForcewakeAddDelayForAck
v8: s/ICL_HDC_CHICKEN0/ICL_HDC_MODE (Mika)
v9:
- C, not lisp (Chris)
- WaIncreaseDefaultTLBEntries is the same for GEN > 9_LP (Tvrtko)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525814984-20039-2-git-send-email-oscar.mateo@intel.com
This patch adds NV12 to list of supported formats for sprite plane.
v2: Rebased (me)
v3: Review comments by Ville addressed
- Removed skl_plane_formats_with_nv12 and added
NV12 case in existing skl_plane_formats
- Added the 10bpc RGB formats
v4: Addressed review comments from Clinton A Taylor
"Why are we adding 10 bit RGB formats with the NV12 series patches?
Trying to set XR30 or AB30 results in error returned even though
the modes are advertised for the planes"
- Removed 10bit RGB formats added previously with NV12 series
v5: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.
Addressed review comments from Clinton A Taylor
"Why are we adding 10 bit RGB formats with the NV12 series patches?
Trying to set XR30 or AB30 results in error returned even though
the modes are advertised for the planes"
- Previous version has 10bit RGB format removed from VLV formats
by mistake. Fixing that in this version.
Removed 10bit RGB formats added previously with NV12 series
for SKL.
v6: Addressed review comments by Ville
Restricting the NV12 to BXT and PIPE A and B
v7: Rebased (me)
v8: Rebased (me)
Restricting NV12 changes to BXT and KBL
Restricting NV12 changes for plane 0 (overlay)
v9: Rebased (me)
v10: Addressed review comments from Maarten.
Adding NV12 to skl_plane_formats itself.
v11: Addressed review comments from Shashank Sharma
v12: Addressed review comments from Shashank Sharma
Made the condition in intel_sprite_plane_create
simple and easy to read as suggested.
v13: Adding reviewed by tag from Shashank Sharma
Addressed review comments from Juha-Pekka Heikkila
"NV12 not to be supported by SKL"
v14: Addressed review comments from Ville
Added skl_planar_formats to include NV12
and a check skl_plane_has_planar in sprite create
Added NV12 format to skl_mod_supported. These were
review comments from Kristian Høgsberg <hoegsberg@gmail.com>
v15: Added reviewed by from Juha-Pekka Heikkila
v16: Rebased the series
v17: Added all tiling under mod supported for NV12
Credits to Megha Aggarwal
v18: Added RB by Maarten and Kristian
v19: Addressed review comments from Maarten
Made modification to skl_mod_supported
Credits-to: Megha Aggarwal <megha.aggarwal@intel.com>
Credits-to: Kristian Høgsberg <hoegsberg@gmail.com>
Reviewed-by: Kristian Høgsberg <hoegsberg@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-7-git-send-email-vidya.srinivas@intel.com
This patch adds NV12 to list of supported formats for
primary plane
v2: Rebased (Chandra Konduru)
v3: Rebased (me)
v4: Review comments by Ville addressed
Removed the skl_primary_formats_with_nv12 and
added NV12 case in existing skl_primary_formats
v5: Rebased (me)
v6: Missed the Tested-by/Reviewed-by in the previous series
Adding the same to commit message in this version.
v7: Review comments by Ville addressed
Restricting the NV12 for BXT and on PIPE A and B
Rebased (me)
v8: Rebased (me)
Modified restricting the NV12 support for both BXT and KBL.
v9: Rebased (me)
v10: Addressed review comments from Maarten.
Adding NV12 inside skl_primary_formats itself.
v11: Adding Reviewed By tag from Shashank Sharma
v12: Addressed review comments from Juha-Pekka Heikkila
"NV12 not to be supported by SKL"
v13: Addressed review comments from Ville
Added skl_pri_planar_formats to include NV12
and skl_plane_has_planar function to check for
NV12 support on plane. Added NV12 format to
skl_mod_supported. These were review comments
from Kristian Høgsberg <hoegsberg@gmail.com>
v14: Added reviewed by from Juha-Pekka Heikkila
v15: Rebased the series
v16: Added all tiling support under mod supported
for NV12. Credits to Megha Aggarwal
v17: Added RB by Maarten and Kristian
v18: Review comments from Maarten addressed -
Removing BROXTON support for NV12 due to WA826
v19: Addressed review comments from Maarten
Make changes to skl_mod_supported
Credits-to: Megha Aggarwal megha.aggarwal@intel.com
Credits-to: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Kristian Høgsberg <hoegsberg@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-6-git-send-email-vidya.srinivas@intel.com
This patch adds NV12 as supported format
to intel_framebuffer_init and performs various checks.
v2:
-Fix an issue in checks added (Chandra Konduru)
v3: rebased (me)
v4: Review comments by Ville addressed
Added platform check for NV12 in intel_framebuffer_init
Removed offset checks for NV12 case
v5: Addressed review comments by Clinton A Taylor
This NV12 support only correctly works on SKL.
Plane color space conversion is different on GLK and later platforms
causing the colors to display incorrectly.
Ville's plane color space property patch series
in review will fix this issue.
- Restricted the NV12 case in intel_framebuffer_init to
SKL and BXT only.
v6: Rebased (me)
v7: Addressed review comments by Ville
Restricting the NV12 to BXT for now.
v8: Rebased (me)
Restricting the NV12 changes to BXT and KBL for now.
v9: Rebased (me)
v10: NV12 supported by all GEN >= 9.
Making this change in intel_framebuffer_init. This is
part of addressing Maarten's review comments.
Comment under v8 no longer applicable
v11: Addressed review comments from Shashank Sharma
v12: Adding Reviewed By from Shashank Sharma
v13: Addressed review comments from Juha-Pekka Heikkila
"NV12 not to be supported by SKL"
v14: Addressed review comments from Maarten.
Add checks for fb width height for NV12 and fail the fb
creation if check fails. Added reviewed by from
Juha-Pekka Heikkila
v15: Rebased the series
v16: Setting the minimum value during fb creating to 16
as per Bspec for NV12. Earlier minimum was expected
to be > 16. Now changed it to >=16.
v17: Adding restriction to framebuffer_init - the fb
width and height should be a multiplier of 4
v18: Added RB from Maarten. Included Maarten's review comments
Dont allow CCS formats for fb creation of NV12
v19: Review comments from Maarten addressed -
Removing BROXTON support for NV12 due to WA826
Credits-to: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Clinton Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Signed-off-by: Chandra Konduru <chandra.konduru@intel.com>
Signed-off-by: Nabendu Maiti <nabendu.bikash.maiti@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-5-git-send-email-vidya.srinivas@intel.com
We skip src trunction/adjustments for
NV12 case and handle the sizes directly.
Without this, pipe fifo underruns are seen on APL/KBL.
v2: For NV12, making the src coordinates multiplier of 4
v3: Moving all the src coords handling code for NV12
to skl_check_nv12_surface
v4: Added RB from Mika
v5: Rebased the series. Removed checks of mult of 4 in
skl_update_scaler, Added NV12 condition in intel_check_sprite_plane
where src x/w is being checked for mult of 2 for yuv planes.
v6: Made changes to skl_check_nv12_surface as per WA#1106
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-4-git-send-email-vidya.srinivas@intel.com
Possible hang with NV12 plane surface formats.
WA: When the plane source pixel format is NV12,
the CHICKEN_PIPESL_* register bit 22 must be set to 1
and the render decompression must not be enabled
on any of the planes in that pipe.
v2: removed unnecessary POSTING_READ
v3: Added RB from Maarten
v4: Removed support for NV12 for BROXTON
Credits-to: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-3-git-send-email-vidya.srinivas@intel.com
The workaround was applied only to the primary plane, but is required
on all planes. Iterate over all planes in the crtc atomic check to see
if the workaround is enabled, and only perform the actual toggling in
the pre/post plane update functions.
Changes since v1:
- Track active NV12 planes in a nv12_planes bitmask. (Ville)
v2: Removing BROXTON support for NV12 due to WA826
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1526074397-10457-2-git-send-email-vidya.srinivas@intel.com
Driver features data block has a boolean flag for PSR, use this to decide
whether PSR should be enabled on a platform. The module parameter can
still be used to override this.
Note: The feature currently remains disabled by default for all platforms
irrespective of what VBT says.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180509003524.3199-1-dhinakaran.pandiyan@intel.com
Prepare to allow the GuC submission to be run from underneath a
hardirq timer context (and not just the current softirq context) as is
required for fast preemption resets and context switches.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508210318.10274-2-chris@chris-wilson.co.uk
Prepare to allow the execlists submission to be run from underneath a
hardirq timer context (and not just the current softirq context) as is
required for fast preemption resets and context switches.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508210318.10274-1-chris@chris-wilson.co.uk
In igt_flush_test() we try to switch back to the kernel context, but we
are only able to do so when we are called with struct_mutex held.
More of my CI fallout from lockdep being temporarily suppressed :(
Fixes: 4cdf65ce8c ("drm/i915/selftests: Return to kernel context after each test")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180509065926.19207-1-chris@chris-wilson.co.uk
Calling mock_engine() calls i915_timeline_init() and that requires
struct_mutex to be held as it adds itself to the global list of
timelines. This error was introduced by commit a89d1f921c ("drm/i915:
Split i915_gem_timeline into individual timelines") but the issue was
masked in CI by the earlier lockdep spam.
Fixes: a89d1f921c ("drm/i915: Split i915_gem_timeline into individual timelines")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508211056.17151-1-chris@chris-wilson.co.uk
The i915_flip* tracepoints are no longer in use since the removal of CS
flip in commit 8b5d27b911 ("drm/i915: Remove intel_flip_work
infrastructure")
References: 8b5d27b911 ("drm/i915: Remove intel_flip_work infrastructure")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180508151552.31024-1-chris@chris-wilson.co.uk
During request submission, we call the engine->schedule() function so
that we may reorder the active requests as required for inheriting the
new request's priority. This may schedule several tasklets to run on the
local CPU, but we will need to schedule the tasklets again for the new
request. Delay all the local tasklets until the end, so that we only
have to process the queue just once.
v2: Beware PREEMPT_RCU, as then local_bh_disable() is then not a
superset of rcu_read_lock().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180507135731.10587-2-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
When called from process context tasklet_schedule() defers itself to
ksoftirqd. From experience this may cause unacceptable latencies of over
200ms in executing the submission tasklet, our goal is to reprioritise
the HW execution queue and trigger HW preemption immediately, so disable
bh over the call to schedule and force the tasklet to run afterwards if
scheduled.
v2: Keep rcu_read_lock() around for PREEMPT_RCU
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180507135731.10587-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
