zram_slot_free_notify() is free-running without any protection from
concurrent operations. So there are race conditions between
zram_bvec_read()/zram_bvec_write() and zram_slot_free_notify(),
and possible consequences include:
1) Trigger BUG_ON(!handle) on zram_bvec_write() side.
2) Access to freed pages on zram_bvec_read() side.
3) Break some fields (bad_compress, good_compress, pages_stored)
in zram->stats if the swap layer makes concurrently call to
zram_slot_free_notify().
So enhance zram_slot_free_notify() to acquire writer lock on zram->lock
before calling zram_free_page().
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Memory for zram->disk object may have already been freed after returning
from destroy_device(zram), then it's unsafe for zram_reset_device(zram)
to access zram->disk again.
We can't solve this bug by flipping the order of destroy_device(zram)
and zram_reset_device(zram), that will cause deadlock issues to the
zram sysfs handler.
So fix it by holding an extra reference to zram->disk before calling
destroy_device(zram).
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tidy up the multi-line comment at the beginning of the file to
follow the CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the boardinfo table so it has namespace associated with the
driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, add some whitespace to the subdevice init
and reorder it a bit.
Remove the blank line printk at the end of the attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, rename the function.
Use a local variable for the 'reg' offset that is stored in the
comedi_subdevice 'private' pointer to minimize the number of casts.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, rename the function.
Use a local variable for the 'reg' offset that is stored in the
comedi_subdevice 'private' pointer to minimize the number of casts.
Also, add local variables for the 'mask' and 'bits'.
The outputs only need to be updated if the 'mask' indicates that the
'bits' are changing. Move the update code into the main 'if (mask)'
block.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the boardinfo declaration to C99 format and move it near the
struct definition.
Since the *_SIZE defines are only used in the boardinfo, remove them
and just open code the values in the boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce some helper functions to check if a given 'range' index
to a comedi_subdevice 'range_table' is a bipolar or unipolar range.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver does not use interrupts and the comedi core handles the
allocation of the io resource so these includes are not required.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to the PCM-A/D-12/16 Operations Manual:
NOTE: On the PCM-A/D-12 the lower nibble of the hex value will always be 0.
Fix the pcmad_ai_insn_read() function to properly handle this by shifting
the data after it has been read.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comedi_config utility is used to attach to this board. One of the
configuration options passed by the user sets the analog input encoding
for straight binary or two's complement data. The hardware produces
straight binary data when jumpered for 5V unipolar inputs and two's
complement data when jumpered for +-10V bipolar inputs.
Use the configuration option to correctly set the comedi_subdevice
range_table.
We can then use a helper function to determine what the range is when
reading the analog inputs. This allows removing the 'twos_comp' variable
from the private data (which was actually never used).
Since the private data is now empty, remove it completely.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comedi_config utility is used to attach to this board. One of the
configuration options passed by the user sets the analog input reference
for single-ended or differential inputs.
Use the configuration option to correctly set the comedi_subdevice flags
as well as the number of channels.
Remove the 'differential' variable from the private data. Its not used
by the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This information is only used to set the subdevice 'maxdata'. Change
it so the calculation is not needed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the comment before the function, the options are documented at
the beginning of the file.
Remove the PCMAD_SIZE define. It's only used in the attach to specify
the io region size.
For aesthetic reasons, add some whitespace to the subdevice init and
reorder them a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use a local variable to read and munge the analog input data instead
of directly using the 'data' pointer passed to the function.
(*insn_read) functions either return an errno or the number of data
values read. Change the final return to insn->n to make this clearer.
Tidy up the function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The const boardinfo pointer is only used in this function to work out
the value needed to convert the data to its twos complement. Use the
comedi_subdevice 'maxdata' to do this conversion and remove the 'board'
pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of returning invalid data, return -ETIME if the analog input
conversion times out.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetic reasons, move the boardinfo declaration so it follows
the definition.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tidy up the multi-line comments at the beginning of the file to
follow the CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
read_nic_*() functions are defined in r8192U_core.c.
They call internally usb_control_msg() to read the
nic registers and return the value read.
Following a remark made by Dan Carpenter, if usb_control_msg()
fails, the value returned will be invalid.
To accommodate for this, this patch changes the functions
to take a pointer as argument to set the value read and
return 0 on success and the error status on failure, so
that callers of read_nic_*() can check the return status.
Some other fixes introduced in read_nic_*() functions are:
The expressions (1<<EPROM_*_SHIFT) used to address and set
the individual bits of the eeprom register were replaced
with EPROM_*_BIT bitmasks to make the code more intuitive.
EPROM_*_BIT bitmasks were defined in r8192U_hw.h and
EPROM_*_SHIFT were removed.
In netdev_err(), which is called in case of failure,
the hardcoded function name in the error log message was
replaced with __func__ to reduce line size.
Also, from the error log message, it was omitted the word
"Timeout" and it is just reported the error code since the
failure can not only be due to timeout expiration but also
due to a memory allocation failure. In case of timeout
expiration, usb_start_wait_urb() prints an appropriate log
message when debug is enabled.
Finally, some minor fixes to the coding style were applied in
lines affected by the above changes, including the removal
of ifdef DEBUG_RX (the debugging of reads and writes of the
nic registers shall be done with explicit check on their
return status which will be added in a follow on patch).
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean MacLennan fixed this in the rtl8192e driver and we should fix
it here as well.
It's pretty harmless. This information comes from the firmware, if
we were to hit this bug we would read beyond the end of the array
once or twice before returning and update our statistics with bogus
data.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
resolves checkpatch errors and warnings regarding whitespace around
operators, line lengths and indentation.
Signed-off-by: Laura Lawniczak <laura.lawniczak@googlemail.com>
Signed-off-by: Johannes Schilling <of82ecuq@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function usb_stor_print_cmd was declared in init.c but only used
in transport.c. So it was reasonable to move it there and declare
it static
Signed-off-by: Laura Lawniczak <laura.lawniczak@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
as per suggestion of checkpatch.pl; this resolves warnings like "Prefer
netdev_info .. then dev_info .. to printk".
Changed signature of function usb_stor_print_cmd in init.c to enable
usage of dev_err
Signed-off-by: Laura Lawniczak <laura.lawniczak@googlemail.com>
Signed-off-by: Johannes Schilling <of82ecuq@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
as advised by checkpatch, changed generic max(..) to max_t(int, ..
Signed-off-by: Laura Lawniczak <laura.lawniczak@googlemail.com>
Signed-off-by: Johannes Schilling <of82ecuq@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
resolves checkpatch.pl warning "do not add new typedefs" and renames allcaps
structures.
Signed-off-by: Laura Lawniczak <laura.lawniczak@googlemail.com>
Signed-off-by: Johannes Schilling <of82ecuq@cip.cs.fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No need to cast count since it is already ssize_t. No need
to cast payload to const, but need __force instead to avoid
Sparse complaining.
Reported-and-Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mdc_kuc_fops is missing open/release handlers. I fixed it before but
somehow forgot to amend to the patch sent out. Sorry...
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 37d4093fd3.
I've verified that we now don't break build on X86_64 allmodconfig.
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We don't need to implement crc32 and crc32pclmul on our own.
The crc32-pclmul support was merged into the 3.8 kernel in commit
78c37d1, no need to keep a local copy in Lustre anymore.
The crc32 implementation is identical to crypto-crc32. So drop
Lustre's private implementation and select kernel crypto in Kconfig.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
module_refcount() is not available when CONFIG_MODULE_UNLOAD is off.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It was mistakenly removed by coan. Add it back and also with a new
Kconfig option to enable it.
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are no callers of them. Besides, lu_context_keys_dump breaks
build when CONFIG_MODULES is not set.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
set_cpus_allowed is not available with CONFIG_CPUMASK_OFFSTACK on.
We should call set_cpus_allowed_ptr instead.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch replaces macro rx_hal_is_cck_rate() with
the static inline function rx_hal_is_cck_rate().
This replacement was suggested by Dan Carpenter and
has the following benefits:
- improves code readability
- guarantees type safety
- improves code efficiency by enforcing the evaluation of
the simple boolean expression (!pdrvinfo->RxHT) to be
done before the evaluation of the more complex one
(pdrvinfo->RxRate == DESC90_RATE1M ||
pdrvinfo->RxRate == DESC90_RATE2M ||
pdrvinfo->RxRate == DESC90_RATE5_5M ||
pdrvinfo->RxRate == DESC90_RATE11M)
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch error:
ERROR: space prohibited before that '++'
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch error:
ERROR: space prohibited after that '&'
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch errors:
ERROR: spaces required around that '?'
ERROR: spaces required around that ':'
ERROR: spaces required around that '&&'
ERROR: spaces required around that '||'
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch error:
ERROR: return is not a function, parentheses are not required
Also, fixes the spaces in return statements to
improve code readability.
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes the following checkpatch error:
ERROR: space prohibited before open square bracket '['
Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tidy up the multi-line comments at the beginning of the file to
follow the CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Return 0 instead of 1 to indicate a successful attach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This define has a very generic name. Its only used in one place
so instead of renaming it just remove it and open code the value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the function so it has namespace associated with the driver.
For aesthetic reasons, move the function closer to it's only caller.
Pass the comedi_subdevice pointer to the function so we can get the
number of channels to reset from it instead of using the 'CHANS'
define.
Remove the 'CHANS' define since it's a very generic name.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These macros rely on a local variable having a specific name.
Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only the last value needs to be saved for readback.
Remove the LSB and MSB macros.
(*insn_write) functions should return an errno or the number of
samples actually read. Change the final return to insn->n to
make this clear.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
