This is the same code and comment that is already shared by imx-ldb,
imx-tve, and parallel-display in imx_drm_encoder_parse_of().
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
ipu_mbus_code_to_colorspace, ipu_stride_to_bytes, and
ipu_pixelformat_is_planar are unused. Remove them.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms. A bulk of this is smaller fixes
or cleanups, but some of the new material this time around is:
- Support for Nvidia Tegra234 SoC
- Ring accelerator support for TI AM65x
- PRUSS driver for TI platforms
- Renesas support for R-Car V3U SoC
- Reset support for Cortex-M4 processor on i.MX8MQ
There are also new socinfo entries for a handful of different SoCs and
platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits)
drm/mediatek: reduce clear event
soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
soc: mediatek: cmdq: add jump function
soc: mediatek: cmdq: add write_s_mask value function
soc: mediatek: cmdq: add write_s value function
soc: mediatek: cmdq: add read_s function
soc: mediatek: cmdq: add write_s_mask function
soc: mediatek: cmdq: add write_s function
soc: mediatek: cmdq: add address shift in jump
soc: mediatek: mtk-infracfg: Fix kerneldoc
soc: amlogic: pm-domains: use always-on flag
reset: sti: reset-syscfg: fix struct description warnings
reset: imx7: add the cm4 reset for i.MX8MQ
dt-bindings: reset: imx8mq: add m4 reset
reset: Fix and extend kerneldoc
reset: reset-zynqmp: Added support for Versal platform
dt-bindings: reset: Updated binding for Versal reset driver
reset: imx7: Support module build
soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk
soc: fsl: qman: convert to use be32_add_cpu()
...
Writes to CURSURFLIVE in TGL are causing IOMMU errors and visual
glitches that are often reproduced when executing CPU intensive
workloads while a eDP 4K panel is attached.
Manually exiting PSR causes the frontbuffer to be updated without
glitches and the IOMMU errors are also gone but this comes at the cost
of less time with PSR active.
So using this workaround until this issue is root caused and a better
fix is found.
The current code is already ready to enable PSR after this exit if
there is not other frontbuffer modifications.
Adding a new if block in psr_force_hw_tracking_exit() instead of reuse
the else/gen8- block because the plan is to revert this workaround
as soon as a better solution is found.
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Tested-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201002231627.24528-1-jose.souza@intel.com
Pull more drm fixes from Dave Airlie:
"This should be the last round of things for rc1, a bunch of i915
fixes, some amdgpu, more font OOB fixes and one ttm fix just found
reading code:
fbcon/fonts:
- Two patches to prevent OOB access
ttm:
- fix for evicition value range check
amdgpu:
- Sienna Cichlid fixes
- MST manager resource leak fix
- GPU reset fix
amdkfd:
- Luxmark fix for Navi1x
i915:
- Tweak initial DPCD backlight.enabled value (Sean)
- Initialize reserved MOCS indices (Ayaz)
- Mark initial fb obj as WT on eLLC machines to avoid rcu lockup (Ville)
- Support parsing of oversize batches (Chris)
- Delay execlists processing for TGL (Chris)
- Use the active reference on the vma during error capture (Chris)
- Widen CSB pointer (Chris)
- Wait for CSB entries on TGL (Chris)
- Fix unwind for scratch page allocation (Chris)
- Exclude low patches of stolen memory (Chris)
- Force VT'd workarounds when running as a guest OS (Chris)
- Drop runtime-pm assert from vpgu io accessors (Chris)"
* tag 'drm-next-2020-10-23' of git://anongit.freedesktop.org/drm/drm: (31 commits)
drm/amdgpu: correct the cu and rb info for sienna cichlid
drm/amd/pm: remove the average clock value in sysfs
drm/amd/pm: fix pp_dpm_fclk
Revert drm/amdgpu: disable sienna chichlid UMC RAS
drm/amd/pm: fix pcie information for sienna cichlid
drm/amdkfd: Use same SQ prefetch setting as amdgpu
drm/amd/swsmu: correct wrong feature bit mapping
drm/amd/psp: Fix sysfs: cannot create duplicate filename
drm/amd/display: Avoid MST manager resource leak.
drm/amd/display: Revert "drm/amd/display: Fix a list corruption"
drm/amdgpu: update golden setting for sienna_cichlid
drm/amd/swsmu: add missing feature map for sienna_cichlid
drm/amdgpu: correct the gpu reset handling for job != NULL case
drm/amdgpu: add rlc iram and dram firmware support
drm/amdgpu: add function to program pbb mode for sienna cichlid
drm/i915: Drop runtime-pm assert from vgpu io accessors
drm/i915: Force VT'd workarounds when running as a guest OS
drm/i915: Exclude low pages (128KiB) of stolen from use
drm/i915/gt: Onion unwind for scratch page allocation failure
drm/ttm: fix eviction valuable range check.
...
[why]
get_pixel_clk_frequency_100hz is undefined in clock_source_funcs.
[how]
set function pointer: ".get_pixel_clk_frequency_100hz = get_pixel_clk_frequency_100hz"
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dm_comressor_info -> dm_compressor_info
The kernel-doc markup is right, but the struct itself
and their references contain a typo.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A kernel-doc markup can't be mixed with a random comment,
as it causes parsing problems.
While here, change an invalid kernel-doc markup into
a common comment.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable Memory Access at Last Level (MALL) feature for display.
v2: squash in 64 bit division fixes
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable Memory Access at Last Level (MALL) feature for sienna_cichlid.
v2: drop module option. We need to add UAPI so userspace can
request MALL per buffer.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
intel_timeline_read_hwsp() is used to support semaphore waits between
engines, that may themselves be deferred for arbitrary periods -- that
is the read of the target request's HWSP is at an indeterminant point in
the future. To support this, we need to prevent overwriting a HWSP that
is being watched across a seqno wrap (otherwise the next request will
write its value into the old HWSP preventing the watcher from making
progress, ad infinitum.) To simulate the observer across a wrap, let's
create a request that reads from the HWSP and dispatch it at different
points around a wrap to see if the value is lost.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201021220411.5777-2-chris@chris-wilson.co.uk
We wrap the timeline on construction of the next request, but there may
still be requests in flight that have not yet finalized the breadcrumb.
(The breadcrumb is delayed as we need engine-local offsets, and for the
virtual engine that is not known until execution.) As such, by the time
we write to the timeline's HWSP offset it may have changed, and we
should use the value we preserved in the request instead.
Though the window is small and infrequent (at full flow we can expect a
timeline's seqno to wrap once every 30 minutes), the impact of writing
the old seqno into the new HWSP is severe: the old requests are never
completed, and the new requests are completed before they are even
submitted.
Fixes: ebece75392 ("drm/i915: Keep timeline HWSP allocated until idle across the system")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.2+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201022064127.10159-1-chris@chris-wilson.co.uk
Since Ironlake uses intel_ips.ko for its dynamic frequency adjustment,
we do not have direct control over the frequency management so such
tests are defunct. Similarly, we can't check the gen6+ RPS registers on
Ironlake.
Hopefully this catches all the invalid tests now that Ironlake has
rejoined the dynamic GPU frequency club. There is an opportunity for the
reader to add tests to exercise MEMINTRSTS and co.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201022210814.23004-1-chris@chris-wilson.co.uk
- Tweak initia DPCD backlight.enabled value (Sean)
- Initialize reserved MOCS indices (Ayaz)
- Mark initial fb obj as WT on eLLC machines to avoid rcu lockup (Ville)
- Support parsing of oversize batches (Chris)
- Delay execlists processing for TGL (Chris)
- Use the active reference on the vma during error capture (Chris)
- Widen CSB pointer (Chris)
- Wait for CSB entries on TGL (Chris)
- Fix unwind for scratch page allocation (Chris)
- Exclude low patches of stolen memory (Chris)
- Force VT'd workarounds when running as a guest OS (Chris)
- Drop runtime-pm assert from vpgu io accessors (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201022205613.GA3469192@intel.com
As we disable the interrupt during suspend, also reset the irq_mask to
short-circuit subsystems that later try to turn off their interrupt
source.
<4>[ 101.816730] i915 0000:00:02.0: drm_WARN_ON(!intel_irqs_enabled(dev_priv))
<4>[ 101.816853] WARNING: CPU: 3 PID: 4241 at drivers/gpu/drm/i915/i915_irq.c:343 ilk_update_display_irq+0xb3/0x130 [i915]
v2: Reset irq_mask for i8xx_irq_reset as well, and split patch to focus
on only i915->irq_mask
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201022114246.28566-1-chris@chris-wilson.co.uk
If the DSI driver is the last to probe, component_add will try to run all
the bind callbacks straight away and return the error code.
However, since we depend on a power domain, we're pretty much guaranteed to
be in that case on the BCM2711, and are just lucky on the previous SoCs
since the v3d also depends on that power domain and is further in the probe
order.
In that case, the DSI host will not stick around in the system: the DSI
bind callback will be executed, will not find any DSI device attached and
will return EPROBE_DEFER, and we will then remove the DSI host and ask to
be probed later on.
But since that host doesn't stick around, DSI devices like the RaspberryPi
touchscreen whose probe is not linked to the DSI host (unlike the usual DSI
devices that will be probed through the call to mipi_dsi_host_register)
cannot attach to the DSI host, and we thus end up in a situation where the
DSI host cannot probe because the panel hasn't probed yet, and the panel
cannot probe because the DSI host hasn't yet.
In order to break this cycle, let's wait until there's a DSI device that
attaches to the DSI host to register the component and allow to progress
further.
Acked-by: Eric Anholt <eric@anholt.net>
Suggested-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707101912.571531-1-maxime@cerno.tech
Since we keep a driver global mask of online CPUs and base the decision
whether PMU needs to be migrated upon it, we need to make sure the
migration is done for all registered PMUs (so GPUs).
To do this we need to track the current CPU for each PMU and base the
decision on whether to migrate on a comparison between global and local
state.
At the same time, since dynamic CPU hotplug notification slots are a
scarce resource and given how we already register the multi instance type
state, we can and should add multiple instance of the i915 PMU to this
same state and not allocate a new one for every GPU.
v2:
* Use pr_notice. (Chris)
v3:
* Handle a nasty interaction where unregistration which triggers a false
CPU offline event. (Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Daniel Vetter <daniel.vetter@intel.com> # dynamic slot optimisation
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020161144.678668-1-tvrtko.ursulin@linux.intel.com
0 causes instruction fetch stall at cache line boundary under some
conditions on Navi10. A non-zero prefetch is the preferred default
in any case.
Fixes soft hang in Luxmark.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
1. when smc feature bit isn't mapped,
the feature state isn't showed on sysfs node of pp_features.
2. add pp_features table title
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
