When timeout is 0, we need to return the busy status in case the
target value wasn't reached upon entry to the ioctl.
Also return the correct timestamp.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This is not something we can do a workaround. It is clearly an error
and we should notify the user that it is an error.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Currently we only expose to the user the ID of the first available
user interrupt. To make user interrupts allocation truly dynamic, we
need to also expose the number of user interrupts.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add a missing error check in the sysfs show function for max_power.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In case of soft reset failure, hard reset should be initiated, but
reset flags were not set to enable it, which caused another soft reset
followed by another failure.
Updated reset flags to enable hard reset flow in case of soft reset
failure.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Add a missing error check in the sysfs show functions for
clk_max_freq_mhz and clk_cur_freq_mhz_show.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
If reading PLL info from F/W fails, the PLL info is not set in the
"result" variable, and hence shouldn't be copied to the caller's array.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Freeing phys_pg_pack includes calling to scrubbing functions of the
device's memory, taking locks and possibly even calling reset.
This is not something that should be done while holding a device-wide
spinlock.
Therefore, save the relevant objects on a local linked-list and after
releasing the spinlock, traverse that list and free the phys_pg_pack
objects.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In order to support several device MMU blocks with different
architectures (e.g. different HOP table size) we need to move to
per-MMU properties rather than keeping those properties as ASIC
properties.
Refactoring the code to use "per-MMU proprties" is a major effort.
To start making the transition towards this goal but still support
taking the properties from ASIC properties (for code that currently
uses them) this patch copies some of the properties to the "per-MMU"
properties and later, when implementing the per-MMU properties, we
would be able to delete the MMU props from the ASIC props.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In future ASICs, there is no kernel TDR for new workloads that are
submitted directly from user-space to the device.
Therefore, the driver can NEVER know that a workload has timed-out.
So, when the user asks us to wait for interrupt on the workload's
completion, and the wait has timed-out, it doesn't mean the workload
has timed-out. It only means the wait has timed-out, which is NOT an
error from driver's perspective.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Adds new sysfs entry to display firmware os version
/sys/class/habanalabs/hl<n>/fw_os_ver
Signed-off-by: Rajaravi Krishna Katta <rkatta@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
We have a common function that wraps the call to the MMU cache
invalidation function, which is ASIC-specific. The wrapper checks
the return value and prints error if necessary. For consistency, try
to use the wrapper when possible.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
infineon version is only applicable to GOYA and GAUDI. For later
ASICs, we display the Voltage Regulator Monitor f/w version.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
In this attribute group we are only adding clocks. This is in
preparation for adding a device specific attribute group which is
not related to clocks.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Setting PLL profile is the same for all ASICs, except for GOYA.
However, because this function is never called from common code, there
is no need to have an asic-specific callback function.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
For better maintainability, try to concentrate all the common functions
that communicate with the f/w in firmware_if.c
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
The two remaining functions in this file belong to firmware_if.c,
as they communicate with the firmware.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Retrieving the clock from the f/w is done exactly the same in ALL our
ASICs. Therefore, no real justification for doing it as an
ASIC-specific function.
The only thing is we need to check if we are running on simulator,
which doesn't require ASIC-specific callback.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Move common sysfs store/show functions to sysfs.c file for
consistency.
This is part of a patch-set to remove hwmgr.c
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Some MMU functions can be used by different versions of our MMUs, so
move them to be common.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Now that clock gating is permanently disabled in GAUDI, no need for
the ASIC functions of setting and disabling clock gating, as this
was a unique scenario in GAUDI.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Due to the need of SynapseAI to configure all TPC engines from a single
QMAN, the driver must disable CGM and never allow the user to enable
it. Otherwise, the configuration of the TPC engines will fail.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
This patch fixes what seems to be copy paste error.
We will have a memory leak if the host-resident shadow is NULL (which
will likely happen as the DR and HR are not dependent).
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
As part of handling of the multi-CS wait ioctl, hl_cs_poll_fences() is
called in a "while (true)" loop. This function can fail, but the
checking of its return value was missed.
Add this check and exit the loop in case of a failure.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
During the hardware start sequence, do not overwrite the driver state
and do not proceed with the initialization sequence if the state
was changed while the driver was waiting for the start interrupt.
This can happen if the driver's removal/stop procedure was triggered
from the parent level while the driver is waiting for the start
interrupt. This may lead to stray the reset work or the timer
after driver were removed.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20220215080438.264876-4-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid link reset in DISABLED and POWERING_DOWN state
if read error is occurred - let shutdown flow finish.
In any state exit interrupt handler if read error occurred.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20220215080438.264876-3-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid lingering reset thread on driver shutdown.
If the firmware is down during a shutdown flow
do not initiate the link reset, simply disconnect
all clients and let shutdown flow finish
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20220215080438.264876-2-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a quirk to disable MEI interface on Intel PCH Ignition (IGN)
as the IGN firmware doesn't support the protocol.
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20220215080438.264876-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rts522a, rts5228, rts5261
add extra init flow for rtd3
add more power_down setting for avoid being woken up
by plugging or unplugging card when system in S3
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/dace32f573a445908fec0a10482c394c@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The memcpy() runtime defenses are still not landed, so test with
strncpy() for now.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220216202548.2093883-1-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On s390 allyesconfig, there is this build error
rtsx_pcr.c:1084:13: error: 'rtsx_pm_power_saving'
defined but not used
1084 | static void rtsx_pm_power_saving(struct rtsx_pcr *pcr)
| ^~~~~~~~~~~~~~~~~~~~
rtsx_pm_power_saving() is only used by rtsx_pci_runtime_idle()
which is conditional on CONFIG_PM. So conditionally build
rtsx_pm_power_saving() and the similar
rtsx_comm_pm_power_saving() and rtsx_enable_aspm().
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20220213171907.2786442-1-trix@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace "struct list_head head = LIST_HEAD_INIT(head)" with
"LIST_HEAD(head)" to simplify the code.
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Link: https://lore.kernel.org/r/20220209032421.37725-1-cai.huoqing@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While in this particular case (*) it would not be an issue,
the pattern itself is bad and error prone in case somebody
blindly copies to their code.
Don't cast parameter to unsigned long pointer in the bit
operations. Note, new compilers might warn on this line for
potential outbound access.
*) it seems a dead code, so remove it all for good
Fixes: 13d19498b0 ("GRU Driver: driver internal header files")
Acked-by: Dimitri Sivanich <sivanich@hpe.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220214153958.9721-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'err_remove_vmci_dev_g' error label is not at the right place.
This could lead to un-released resource.
There is also a missing label. If pci_alloc_irq_vectors() fails, the
previous vmci_event_subscribe() call must be undone.
Acked-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/959218ce3b135197946d85cd9453551cd04fa5da.1645734041.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmIJZmoeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGZdoH/04d8zUhM3Fd3ACB
V/ONtOXmkfP2mEJSjb7cXTN1EM2SlOBdSnSsEw09FtGhjHABjOnLho4J5ixk9TH8
zNMNI3EMksM2T9KadHwxv8Vvp1LTrWRzMbws8tOCPA0RkOpikJfClC8CzRAyidJ3
cAbbDH/Jl1GnVZ8bpKmv2auYt+kNVGb0cwJ2W8phCwwkL7sLky5tgYeaGiJEXbJf
Tfi/3qtFdmYjD8wtYnCfzjnB7suG5nF7rGEnxCIxNi+IA4DieUv2c1KchuoaBfT9
df364VjKaGT3j+GB07ksQ/8mkwWiRXsCzOXAyMZSZaWjdMD4aAhCTJak5j7/TvGC
wtgHPww=
=/CMW
-----END PGP SIGNATURE-----
Merge 5.17-rc4 into char-misc-next
We need the char/misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the DMA based receive operation instead of the ioread8_rep
based datagram receive when DMA datagrams are supported.
In the receive operation, configure the header to point to the
page aligned VMCI_MAX_DG_SIZE part of the receive buffer
using s/g configuration for the header. This ensures that the
existing dispatch routine can be used with little modification.
Initiate the receive by writing the lower 32 bit of the buffer
to the VMCI_DATA_IN_LOW_ADDR register, and wait for the busy
flag to be changed by the device using a wait queue.
The existing dispatch routine for received datagrams is reused
for the DMA datagrams with a few modifications:
- the receive buffer is always the maximum size for DMA datagrams
(IO ports would try with a shorter buffer first to reduce
overhead of the ioread8_rep operation).
- for DMA datagrams, datagrams are provided contiguous in the
buffer as opposed to IO port datagrams, where they can start
on any page boundary
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Link: https://lore.kernel.org/r/20220207102725.2742-9-jhansen@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use DMA based send operation from the transmit buffer instead of the
iowrite8_rep based datagram send when DMA datagrams are supported.
The outgoing datagram is sent as inline data in the VMCI transmit
buffer. Once the header has been configured, the send is initiated
by writing the lower 32 bit of the buffer base address to the
VMCI_DATA_OUT_LOW_ADDR register. Only then will the device process
the header and the datagram itself. Following that, the driver busy
waits (it isn't possible to sleep on the send path) for the header
busy flag to change - indicating that the send is complete.
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Link: https://lore.kernel.org/r/20220207102725.2742-8-jhansen@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If DMA datagrams are used, allocate send and receive buffers
in coherent DMA memory.
This is done in preparation for the send and receive datagram
operations, where the buffers are used for the exchange of data
between driver and device.
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Link: https://lore.kernel.org/r/20220207102725.2742-7-jhansen@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tell the device the page size used by the OS.
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Link: https://lore.kernel.org/r/20220207102725.2742-5-jhansen@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Detect the VMCI DMA datagram capability, and if present, ack it
to the device.
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Link: https://lore.kernel.org/r/20220207102725.2742-4-jhansen@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Detect the support for MMIO access through examination of the length
of the region requested in BAR1. If it is 256KB, the VMCI device
supports MMIO access to registers.
If MMIO access is supported, map the area of the region used for
MMIO access (64KB size at offset 128KB).
Add wrapper functions for accessing 32 bit register accesses through
either MMIO or IO ports based on device configuration.
Sending and receiving datagrams through iowrite8_rep/ioread8_rep is
left unchanged for now, and will be addressed in a later change.
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Link: https://lore.kernel.org/r/20220207102725.2742-3-jhansen@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A successful ida_simple_get() should be balanced by a corresponding
ida_simple_remove().
Add the missing call in the error handling path of the probe.
While at it, switch to ida_alloc()/ida_free() instead to
ida_simple_get()/ida_simple_remove().
The latter is deprecated and more verbose.
Fixes: 4f556bc04e ("misc: cardreader: add new Alcor Micro Cardreader PCI driver")
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/918a9875b7f67b7f8f123c4446452603422e8c5e.1644136776.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Open Profile for DICE is an open protocol for measured boot compatible
with the Trusted Computing Group's Device Identifier Composition
Engine (DICE) specification. The generated Compound Device Identifier
(CDI) certificates represent the hardware/software combination measured
by DICE, and can be used for remote attestation and sealing.
Add a driver that exposes reserved memory regions populated by firmware
with DICE CDIs and exposes them to userspace via a character device.
Userspace obtains the memory region's size from read() and calls mmap()
to create a mapping of the memory region in its address space. The
mapping is not allowed to be write+shared, giving userspace a guarantee
that the data were not overwritten by another process.
Userspace can also call write(), which triggers a wipe of the DICE data
by the driver. Because both the kernel and userspace mappings use
write-combine semantics, all clients observe the memory as zeroed after
the syscall has returned.
Cc: Andrew Scull <ascull@google.com>
Cc: Will Deacon <will@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Brazdil <dbrazdil@google.com>
Link: https://lore.kernel.org/r/20220126231237.529308-3-dbrazdil@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit effa453168 ("i2c: i801: Don't silently correct invalid transfer
size") revealed that ee1004_eeprom_read() did not properly limit how
many bytes to read at once.
In particular, i2c_smbus_read_i2c_block_data_or_emulated() takes the
length to read as an u8. If count == 256 after taking into account the
offset and page boundary, the cast to u8 overflows. And this is common
when user space tries to read the entire EEPROM at once.
To fix it, limit each read to I2C_SMBUS_BLOCK_MAX (32) bytes, already
the maximum length i2c_smbus_read_i2c_block_data_or_emulated() allows.
Fixes: effa453168 ("i2c: i801: Don't silently correct invalid transfer size")
Cc: stable@vger.kernel.org
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jonas Malaco <jonas@protocubo.io>
Link: https://lore.kernel.org/r/20220203165024.47767-1-jonas@protocubo.io
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the copy back to userland fails for the FASTRPC_IOCTL_ALLOC_DMA_BUFF
ioctl(), we shouldn't assume that 'buf->dmabuf' is still valid. In fact,
dma_buf_fd() called fd_install() before, i.e. "consumed" one reference,
leaving us with none.
Calling dma_buf_put() will therefore put a reference we no longer own,
leading to a valid file descritor table entry for an already released
'file' object which is a straight use-after-free.
Simply avoid calling dma_buf_put() and rely on the process exit code to
do the necessary cleanup, if needed, i.e. if the file descriptor is
still valid.
Fixes: 6cffd79504 ("misc: fastrpc: Add support for dmabuf exporter")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20220127130218.809261-1-minipli@grsecurity.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
