Commit Graph

8415 Commits

Author SHA1 Message Date
Sonika Jindal
c3346ef688 drm/i915/skl: Program PLL for edp1.4 intermediate frequencies
v2: Making the link_clock half in switch inline with the DPLL_CTRL1_* macros
(Ville)

Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-17 22:29:57 +01:00
Sonika Jindal
a8f3ef6197 drm/i915/skl: Add support for edp 1.4 intermediate frequencies
eDp 1.4 supports custom frequencies.
Skylake supports following intermediate frequencies : 3.24 GHz, 2.16 GHz and
4.32 GHz along with usual LBR, HBR and HBR2 frequencies.
Read sink supported frequencies and get common frequencies from sink and
source and use these for link training.

v2: Rebased, removed calculation of min_clock since for edp it is taken as
max_clock (as per comment).
v3: Keeping single array for link rates (Satheesh)
v4: Setting LINK_BW_SET to 0 when setting LINK_RATE_SET (Satheesh)
v5: Some minor nits (Ville)
v6: Keeping separate arrays for source and sink rates (Ville)
v7: Remove redundant setting of DP_LINK_BW_SET to 0 (Ville)

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-17 22:29:57 +01:00
Sonika Jindal
fc0f8e2531 drm/i915/skl: Read sink supported rates from edp panel
v2: Using DP_SUPPORTED_LINK_RATES macro for supported_rates array (Satheesh).
v3: Reading dpcd's supported link rates tables based upon edp version in the
same patch.
v4: Move version check under is_edp (Satheesh)
v5: Using le16 for rates, some naming, and removing nested if block (Ville)
v6: Correctly using DP_MAX_SUPPORTED_RATES and removing DP_SUPPORTED_LINK_RATES
(Ville)
v7: Incorrectly removed DP_SUPPORTED_LINK_RATES in v6, re-adding it
v8: Checking return value of intel_dp_dpcd_read_wake() (Ville)

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-17 22:29:56 +01:00
Paulo Zanoni
dbef0f15b5 drm/i915: add frontbuffer tracking to FBC
Kill the blt/render tracking we currently have and use the frontbuffer
tracking infrastructure.

Don't enable things by default yet.

v2: (Rodrigo) Fix small conflict on rebase and typo at subject.
v3: (Paulo) Rebase on RENDER_CS change.
v4: (Paulo) Rebase.
v5: (Paulo) Simplify: flushes don't have origin (Daniel).
            Also rebase due to patch order changes.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-17 22:29:56 +01:00
Ramalingam C
3954e733ab drm/i915: Fixing mutex deadlock window at eDP DRRS
In invalidate and flush functions of eDP DRRS, if deferred downclock
work starts execution at a time window between acquiring the drrs
mutex and cancellation of the deferred work
(intel_edp_drrs_downclock_work), then deferred work will find
drrs mutex locked and wait for the same.

Meanwhile the function that acquired mutex drrs invalidate/flush will
wait for the completion of the deferred work before releasing the mutex.
Thats a deadlock.

To avoid such deadlock scenario, this change cancels the deferred work
before acquiring the mutex at invalidate and flush functions.

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-17 22:29:55 +01:00
Vandana Kannan
a54746e39a drm/i915: Add debugfs entry for DRRS
Adding a debugfs entry to determine if DRRS is supported or not

V2: [By Ram]: Following details about the active crtc will be filled
	in seq-file of the debugfs
	1. Encoder output type
	2. DRRS Support on this CRTC
	3. DRRS current state
	4. Current Vrefresh
Format is as follows:
CRTC 1:  Output: eDP, DRRS Supported: Yes (Seamless), DRRS_State: DRRS_HIGH_RR, Vrefresh: 60
CRTC 2:  Output: HDMI, DRRS Supported : No, VBT DRRS_type: Seamless
CRTC 1:  Output: eDP, DRRS Supported: Yes (Seamless), DRRS_State: DRRS_LOW_RR, Vrefresh: 40
CRTC 2:  Output: HDMI, DRRS Supported : No, VBT DRRS_type: Seamless

V3: [By Ram]: Readability is improved.
	Another error case is covered [Daniel]

V4: [By Ram]: Current status of the Idleness DRRS along with
	the Front buffer bits are added to the debugfs. [Rodrigo]

V5: [By Ram]: Rephrased to make it easy to understand.
	And format is modified. [Rodrigo]

V6: [By Ram]: Modeset mutex are acquired for each crtc along with
	renaming the Idleness detection states  [Daniel]

Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[danvet: dump full busy_frontbuffer_bits and remove the dubios
computed logical state of DRRS - debugfs is about what is fact,
developers should reach their own conclusion when debugging issues.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-17 22:29:55 +01:00
Neil Roberts
27cd44618b drm/i915: Add I915_PARAM_REVISION
Adds a parameter which can be used with DRM_I915_GETPARAM to query the
GPU revision. The intention is to use this in Mesa to implement the
WaDisableSIMD16On3SrcInstr workaround on Skylake but only for
revision 2.

Signed-off-by: Neil Roberts <neil@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-17 22:29:54 +01:00
Ander Conselvan de Oliveira
10634189fc drm/i915: Improve staged config logging
When logging that full mode switch is necessary, log which connector,
encoder or crtc has caused it, so it is easier to figure out what is
goind on by just looking at the log.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-17 22:29:54 +01:00
Ander Conselvan de Oliveira
3a3371ff0d drm/i915: Add a for_each_intel_connector macro
We have similar macros for crtcs and encoders, and the pattern happens
often enough to justify the macro.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-17 22:29:53 +01:00
Ander Conselvan de Oliveira
a91572f35b drm/i915: Set crtc backpointer when duplicating crtc state
In the path were there is no state to duplicate, the allocated crtc
state wouldn't have the crtc backpointer initialized.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-17 22:29:53 +01:00
Ville Syrjälä
17fe10218b drm/i915: Reduce CHV DPLL min vco frequency to 4.8 GHz
The current minimum vco frequency leaves us with a gap in our supported
frequencies at 233-243 MHz. Your typical 2560x1440@60 display wants a
pixel clock of 241.5 MHz, which is just withing that gap. Reduce the
allowed vco min frequency to 4.8GHz to reduce the gap to 233-240 MHz,
and thus allow such displays to work.

4.8 GHz is actually the documented (at least in some docs) limit of the
PLL, and we just picked 4.86 GHz originally because that was the lowest
value produced by the PLL spreadsheet, which obviously didn't consider
2560x1440 displays.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vijay Purushothaman <vijay.a.purushothaman@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-17 22:29:52 +01:00
Paulo Zanoni
063e4e6bf9 drm/i915: also do frontbuffer tracking on pwrites
We need this for FBC, and possibly for PSR too.

v2: Don't only flush: invalidate too (Daniel).

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-17 22:29:52 +01:00
Paulo Zanoni
a4001f1b75 drm/i915: pass which operation triggered the frontbuffer tracking
We want to port FBC to the frontbuffer tracking infrastructure, but
for that we need to know what caused the object invalidation so
we can react accordingly: CPU mmaps need manual, GTT mmaps and
flips don't need handling and ring rendering needs nukes.

v2: - s/ORIGIN_RENDER/ORIGIN_CS/ (Daniel, Rodrigo)
    - Fix copy/pasted wrong documentation
    - Rebase
v3: - Rebase
v4: - Don't pass the operation to flushes (Daniel).

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-17 22:29:51 +01:00
Daniel Vetter
ff42e093e9 Revert "drm/i915: Switch planes from transitional helpers to full atomic helpers"
This reverts commit 3f678c96ab.

We've been a bit too optimistic with this one here :(

The trouble is that internally we're still using these plane
update/disable hooks. Which was totally ok pre-atomic since the drm
core did all the book-keeping updating and these just mostly updated
hw state. But with atomic there's lots more going on, and it causes
heaps of trouble with the load detect code.

This one specifically cause a deadlock since both the load detect code
and the nested plane atomic helper functions tried to grab the same
locks. It only blows up because of the evil tricks though we play with
the implicit ww acquire context.

Applying this revert unearths the NULL deref on already freed
framebuffer objects reported as a regression in 4.0 by various people.

Fixing this will be fairly invasive, hence revert even for the
4.1-next queue.

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-03-17 22:29:51 +01:00
Damien Lespiau
7ff446708b drm/i915/skl: Only use the 800mV+2bB HDMI translation entry
This translation entry was updated after electrical validation by the hw
team. The other entries are removed from existence as they aren't
validated and because the sole use of a certain type of level shifter
for SKL products is anticipated.

v2: Remove all the other entries and force the use of the 800mv+2dB
    config (Sonika)

Suggested-by: Sonika Jindal <sonika.jindal@intel.com>
Cc: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-17 22:29:50 +01:00
Damien Lespiau
3bdcfc0c2e drm/i915: Make for_each_sprite() take dev_priv as argument
Implicit usage of local variables in macros isn't exactly the greatest
thing in the world, especially when that variable is the drm device and
we want to move towards a broader use of the i915 device structure.

Let's make for_each_sprite() take dev_priv as its first argument then.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Chris Wilson <chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-17 22:29:50 +01:00
Damien Lespiau
dd740780a4 drm/i915: Make for_each_plane() take dev_priv as argument
Implicit usage of local variables in macros isn't exactly the greatest
thing in the world, especially when that variable is the drm device and
we want to move towards a broader use of the i915 device structure.

Let's make for_each_plane() take dev_priv as its first argument then.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Chris Wilson <chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-17 22:29:49 +01:00
Daniel Vetter
9393943be6 drm/i915: Remove irq-related FIXME in reset code
With the two-step reset counter increments which braket the actual
reset code and the subsequent wake-up we're guaranteeing that all the
lockless waiters _will_ be woken up. And since we unconditionally bail
out of waits with -EAGAIN (or -EIO) in that case there is not risk of
lost interrupt enabling bits when the lockless wait code races against
a gpu reset.

Let's remove this FIXME as resolved then.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-17 22:29:49 +01:00
Yannick Guerrini
fd0753cf80 drm/i915: Fix trivial typos in comments and warning message
Change 'mutliple' to 'multiple'
Change 'mutlipler' to 'multiplier'
Change 'Haswel' to 'Haswell'

Signed-off-by: Yannick Guerrini <yguerrini@tomshardware.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-17 22:29:48 +01:00
Matt Roper
59bea8822f drm/i915: Use plane->state->fb in watermark code (v2)
plane->fb is a legacy pointer that not always be up-to-date (or updated
early enough).  Make sure the watermark code uses plane->state->fb so
that we're always doing our calculations based on the correct
framebuffers.

This patch was generated by Coccinelle with the following semantic
patch:

        @@
        struct drm_plane *P;
        @@
        - P->fb
        + P->state->fb

v2: Rebase

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-17 22:29:48 +01:00
Matt Roper
3dd512fbda drm/i915: Kill intel_crtc->cursor_{width, height} (v2)
The cursor size fields in intel_crtc just duplicate the data from
cursor->state.crtc_{w,h} so we don't need them any more.  Worse, their
use in the watermark code actually introduces a subtle bug since they
don't get updated to mirror the state values until the plane commit
stage, which is *after* we've already used them to calculate new
watermark values.  This happens because we had to move watermark updates
slightly earlier (outside vblank evasion) in commit

        commit 32b7eeec4d
        Author: Matt Roper <matthew.d.roper@intel.com>
        Date:   Wed Dec 24 07:59:06 2014 -0800

            drm/i915: Refactor work that can sleep out of commit (v7)

Dropping the intel_crtc fields and just using the state values (which
are properly updated by the time watermark updates happen) should solve
the problem.

Aside from the actual removal of the struct fields (which are formatted
in a way that I couldn't figure out how to match in Coccinelle), the
rest of this patch was generated via the following semantic patch:

        // Drop assignment
        @@
        struct intel_crtc *C;
        struct drm_plane_state S;
        @@
        (
        - C->cursor_width = S.crtc_w;
        |
        - C->cursor_height = S.crtc_h;
        )

        // Replace usage
        @@
        struct intel_crtc *C;
        expression E;
        @@
        (
        - C->cursor_width
        + C->base.cursor->state->crtc_w
        |
        - C->cursor_height
        + C->base.cursor->state->crtc_h
        |
        - to_intel_crtc(E)->cursor_width
        + E->cursor->state->crtc_w
        |
        - to_intel_crtc(E)->cursor_height
        + E->cursor->state->crtc_h
        )

v2: Rebase

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joe Konno <joe.konno@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89346
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-17 22:29:47 +01:00
Xi Ruoyao
319c1d420a drm/i915: Ensure plane->state->fb stays in sync with plane->fb
plane->state->fb and plane->fb should always reference the same FB so
that atomic and legacy codepaths have the same view of display state.
However, there are some places in kernel code that directly set
plane->fb and neglect to update plane->state->fb. If we never do a
successful update through the atomic pipeline, the RmFB cleanup code
will look at the plane->state->fb pointer, which has never actually
been set to a legitimate value, and try to clean it up, leading to
BUG's.

Add a quick helper function to synchronize plane->state->fb with
plane->fb and call it everywhere the driver tries to manually set
plane->fb outside of the atomic pipeline. In this function, use
drm_atomic_set_fb_for_plane instead of writing plane->state->fb
directly to keep the reference count right.

This is modified from Matt Roper's patch to drm-intel-nightly with
commit id

commit afd65eb4cc
Author: Matt Roper <matthew.d.roper@intel.com>
Date:   Tue Feb 3 13:10:04 2015 -0800

    drm/i915: Ensure plane->state->fb stays in sync with plane->fb

However this bug exists in mainline kernel too, so I created this to fix
it in mainline kernel.

A minor change is to use drm_atomic_set_fb_for_plane instead of update
reference count manually.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88909
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=93711
Signed-off-by: Xi Ruoyao <xry111@outlook.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
[Jani: included the patch notes in the commit message]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-03-16 11:13:57 +02:00
Chris Wilson
5e4f518959 drm/i915: Prevent TLB error on first execution on SNB
Long ago I found that I was getting sporadic errors when booting SNB,
with the symptom being that the first batch died with IPEHR != *ACTHD,
typically caused by the TLB being invalid. These magically disappeared
if I held the forcewake during the entire ring initialisation sequence.
(It can probably be shortened to a short critical section, but the whole
initialisation is full of register writes and so we would be taking and
releasing forcewake almost continually, and so holding it over the
entire sequence will probably be a net win!)

Note some of the kernels I encounted the issue already had the deferred
forcewake release, so it is still relevant.

I know that there have been a few other reports with similar failure
conditions on SNB, I think such as
References: https://bugs.freedesktop.org/show_bug.cgi?id=80913

v2: Wrap i915_gem_init_hw() with its own security blanket as we take
that path following resume and reset.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-03-10 15:30:23 +02:00
Mika Kuoppala
0cd0caad99 drm/i915: Do both mt and gen6 style forcewake reset on ivb probe
commit 05a2fb157e ("drm/i915: Consolidate forcewake code")
failed to take into account that we have used to reset both
the gen6 style and the multithreaded style forcewake registers.
This is due to fact that ivb can use either, depending on how the
bios has set up the machine.

Mimic the old semantics before we have determined the correct variety
and reset both before the ecobus probe.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-03-10 11:56:57 +02:00
Chris Wilson
762e45836a drm/i915: Make WAIT_IOCTL negative timeouts be indefinite again
This fixes a regression from

commit 5ed0bdf21a
Author: Thomas Gleixner <tglx@linutronix.de>
Date:   Wed Jul 16 21:05:06 2014 +0000

    drm: i915: Use nsec based interfaces

that made a negative timeout return immediately rather than the
previously defined behaviour of waiting indefinitely.

Testcase: igt/gem_wait
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89494
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Kristian Høgsberg <krh@bitplanet.net>
Cc: stable@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[Jani: fixed a checkpatch complaint about whitespace.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-03-10 11:55:03 +02:00
Dave Gordon
6c51d46f13 drm/i915: use in_interrupt() not in_irq() to check context
The kernel in_irq() function tests for hard-IRQ context only, so if a
system is run with the kernel 'threadirqs' option selected, the test in
intel_check_page_flip() generates lots of warnings, because then it gets
called in soft-IRQ context.

We can instead use in_interrupt() which allows for either type of
interrupt, while still detecting and complaining about misuse of the
page flip code if it is ever called from non-interrupt context.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89321
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-03-10 11:16:54 +02:00
Tvrtko Ursulin
aaed1aa540 drm/i915: Rotation property is now handled in DRM core
So no need to have code which never gets called in the driver.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-10 09:59:33 +01:00
Ville Syrjälä
3a656b54c8 drm/i915: Fix struct_mutex deadlock due to merge fumble
commit a8c6ecb3be
Merge: 8dd0eb35 9eccca0
Author: Dave Airlie <airlied@redhat.com>
Date:   Mon Mar 9 19:58:30 2015 +1000

    Merge tag 'v4.0-rc3' into drm-next

managed to pick the wrong code to resolve the conflict and left us with
a mutex_lock(struct_mutex) without the mutex_unlock(struct_mutex) leading
to a deadlock. Fix the problem by recovering the correct code which doesn't
need the lock.

Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-03-10 08:39:05 +10:00
Dave Airlie
a8c6ecb3be Linux 4.0-rc3
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU/NacAAoJEHm+PkMAQRiGdUcIAJU5dHclwd9HRc7LX5iOwYN6
 mN0aCsYjMD8Pjx2VcPCgJvkIoESQO5pkwYpFFWCwILup1bVEidqXfr8EPOdThzdh
 kcaT0FwUvd19K+0jcKVNCX1RjKBtlUfUKONk6sS2x4RrYZpv0Ur8Gh+yXV8iMWtf
 fAusNEYlxQJvEz5+NSKw86EZTr4VVcykKLNvj+/t/JrXEuue7IG8EyoAO/nLmNd2
 V/TUKKttqpE6aUVBiBDmcMQl2SUVAfp5e+KJAHmizdDpSE80nU59UC1uyV8VCYdM
 qwHXgttLhhKr8jBPOkvUxl4aSXW7S0QWO8TrMpNdEOeB3ZB8AKsiIuhe1JrK0ro=
 =Xkue
 -----END PGP SIGNATURE-----

Merge tag 'v4.0-rc3' into drm-next

Linux 4.0-rc3 backmerge to fix two i915 conflicts, and get
some mainline bug fixes needed for my testing box

Conflicts:
	drivers/gpu/drm/i915/i915_drv.h
	drivers/gpu/drm/i915/intel_display.c
2015-03-09 19:58:30 +10:00
Dave Airlie
8dd0eb3566 Merge tag 'drm-intel-next-2015-02-27' of git://anongit.freedesktop.org/drm-intel into drm-next
- Y tiling support for scanout from Tvrtko&Damien
- Remove more UMS support
- some small prep patches for OLR removal from John Harrison
- first few patches for dynamic pagetable allocation from Ben Widawsky, rebased
  by tons of other people
- DRRS support patches (Sonika&Vandana)
- fbc patches from Paulo
- make sure our vblank callbacks aren't called when the pipes are off
- various patches all over

* tag 'drm-intel-next-2015-02-27' of git://anongit.freedesktop.org/drm-intel: (61 commits)
  drm/i915: Update DRIVER_DATE to 20150227
  drm/i915: Clarify obj->map_and_fenceable
  drm/i915/skl: Allow Y (and Yf) frame buffer creation
  drm/i915/skl: Update watermarks for Y tiling
  drm/i915/skl: Updated watermark programming
  drm/i915/skl: Adjust get_plane_config() to support Yb/Yf tiling
  drm/i915/skl: Teach pin_and_fence_fb_obj() about Y tiling constraints
  drm/i915/skl: Adjust intel_fb_align_height() for Yb/Yf tiling
  drm/i915/skl: Allow scanning out Y and Yf fbs
  drm/i915/skl: Add new displayable tiling formats
  drm/i915: Remove DRIVER_MODESET checks from modeset code
  drm/i915: Remove regfile code&data for UMS suspend/resume
  drm/i915: Remove DRIVER_MODESET checks from gem code
  drm/i915: Remove DRIVER_MODESET checks in the gpu reset code
  drm/i915: Remove DRIVER_MODESET checks from suspend/resume code
  drm/i915: Remove DRIVER_MODESET checks in load/unload/close code
  drm/i915: fix a printk format
  drm/i915: Add media rc6 residency file to sysfs
  drm/i915: Add missing description to parameter in alloc_pt_range
  drm/i915: Removed the read of RP_STATE_CAP from sysfs/debugfs functions
  ...
2015-03-09 19:41:15 +10:00
Dave Airlie
f6bec6ea68 Merge tag 'drm-intel-fixes-2015-03-05' of git://anongit.freedesktop.org/drm-intel into drm-fixes
two fixes, both cc'd stable.

* tag 'drm-intel-fixes-2015-03-05' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: gen4: work around hang during hibernation
  drm/i915: Check for driver readyness before handling an underrun interrupt
2015-03-07 07:40:17 +10:00
Dave Airlie
b0b20ce347 Linux 4.0-rc2
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU9enEAAoJEHm+PkMAQRiG/ewIAJ4MW4tcAhaVj6ndCF3+uL/b
 RaVm1apUjsTloe5Fl0TT9J5CO3zdOetmMNToy2sf0W4MJDIyHf21o83l7eniV/6q
 al/c3fQ6HVtNjiSUNghTtzVlL+gUD1F60b9BGYi1V5h2Mp8u0NG1alTGLQfCB8sE
 ArB+v2aWEdSPn7mZDA0Yuc1In+8bkpht3oy+OLD/8JNkqqLnml9YOyPjM1cuRpBr
 NxKCLcPzSHH9/nR3T6XtkxXYV5xD3+CDm9roJhfHukoFmfT/G3C65Zcp2KEed/Cw
 QQpu+ox7fpUs10F/Fbfm8AE+tRB4o2sGh97sprXrO5oaFdx6FPIBo4WN8i/Vy68=
 =qpY+
 -----END PGP SIGNATURE-----

Merge tag 'v4.0-rc2' into drm-fixes

Linux 4.0-rc2

Merging this manually as the i915 change is in it,
and intel fixes are on top of this
2015-03-07 07:39:37 +10:00
Tvrtko Ursulin
d136dfeec8 drm: Pass in new and old plane state to prepare_fb and cleanup_fb
Use cases like rotation require these hooks to have some context so they
know how to prepare and cleanup the frame buffer correctly.

For i915 specifically, object backing pages need to be mapped differently
for different rotation modes and the driver needs to know which mapping to
instantiate and which to tear down when transitioning between them.

v2: Made passed in states const. (Daniel Vetter)

[airlied: add mdp5 and atmel fixups]
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-03-05 09:49:02 +10:00
Dave Airlie
7547af9186 Merge tag 'drm-intel-next-2015-02-14' of git://anongit.freedesktop.org/drm-intel into drm-next
- use the atomic helpers for plane_upate/disable hooks (Matt Roper)
- refactor the initial plane config code (Damien)
- ppgtt prep patches for dynamic pagetable alloc (Ben Widawsky, reworked and
  rebased by a lot of other people)
- framebuffer modifier support from Tvrtko Ursulin, drm core code from Rob Clark
- piles of workaround patches for skl from Damien and Nick Hoath
- vGPU support for xengt on the client side (Yu Zhang)
- and the usual smaller things all over

* tag 'drm-intel-next-2015-02-14' of git://anongit.freedesktop.org/drm-intel: (88 commits)
  drm/i915: Update DRIVER_DATE to 20150214
  drm/i915: Remove references to previously removed UMS config option
  drm/i915/skl: Use a LRI for WaDisableDgMirrorFixInHalfSliceChicken5
  drm/i915/skl: Fix always true comparison in a revision id check
  drm/i915/skl: Implement WaEnableLbsSlaRetryTimerDecrement
  drm/i915/skl: Implement WaSetDisablePixMaskCammingAndRhwoInCommonSliceChicken
  drm/i915: Add process identifier to requests
  drm/i915/skl: Implement WaBarrierPerformanceFixDisable
  drm/i915/skl: Implement WaCcsTlbPrefetchDisable:skl
  drm/i915/skl: Implement WaDisableChickenBitTSGBarrierAckForFFSliceCS
  drm/i915/skl: Implement WaDisableHDCInvalidation
  drm/i915/skl: Implement WaDisableLSQCROPERFforOCL
  drm/i915/skl: Implement WaDisablePartialResolveInVc
  drm/i915/skl: Introduce a SKL specific init_workarounds()
  drm/i915/skl: Document that we implement WaRsClearFWBitsAtReset
  drm/i915/skl: Implement WaSetGAPSunitClckGateDisable
  drm/i915/skl: Make the init clock gating function skylake specific
  drm/i915/skl: Provide a gen9 specific init_render_ring()
  drm/i915/skl: Document the WM read latency W/A with its name
  drm/i915/skl: Also detect eDRAM on SKL
  ...
2015-03-05 09:41:09 +10:00
Thierry Reding
440fd5283a drm/mm: Support 4 GiB and larger ranges
The current implementation is limited by the number of addresses that
fit into an unsigned long. This causes problems on 32-bit Tegra where
unsigned long is 32-bit but drm_mm is used to manage an IOVA space of
4 GiB. Given the 32-bit limitation, the range is limited to 4 GiB - 1
(or 4 GiB - 4 KiB for page granularity).

This commit changes the start and size of the range to be an unsigned
64-bit integer, thus allowing much larger ranges to be supported.

[airlied: fix i915 warnings and coloring callback]

Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>

fixupo
2015-03-05 09:01:37 +10:00
Imre Deak
ab3be73fa7 drm/i915: gen4: work around hang during hibernation
Bjørn reported that his machine hang during hibernation and eventually
bisected the problem to the following commit:

commit da2bc1b9db
Author: Imre Deak <imre.deak@intel.com>
Date:   Thu Oct 23 19:23:26 2014 +0300

    drm/i915: add poweroff_late handler

The problem seems to be that after the kernel puts the device into D3
the BIOS still tries to access it, or otherwise assumes that it's in D0.
This is clearly bogus, since ACPI mandates that devices are put into D3
by the OSPM if they are not wake-up sources. In the future we want to
unify more of the driver's runtime and system suspend paths, for example
by skipping all the system suspend/hibernation hooks if the device is
runtime suspended already. Accordingly for all other platforms the goal
is still to properly power down the device during hibernation.

v2:
- Another GEN4 Lenovo laptop had the same issue, while platforms from
  other vendors (including mobile and desktop, GEN4 and non-GEN4) seem
  to work fine. Based on this apply the workaround on all GEN4 Lenovo
  platforms.
- add code comment about failing platforms (Ville)

Reference: http://lists.freedesktop.org/archives/intel-gfx/2015-February/060633.html
Reported-and-bisected-by: Bjørn Mork <bjorn@mork.no>
Cc: stable@vger.kernel.org # v3.19
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-03-04 10:08:50 +02:00
Chris Wilson
54fc7c1c96 drm/i915: Check for driver readyness before handling an underrun interrupt
When we takeover from the BIOS and install our interrupt handler, the
BIOS may have left us a few surprises in the form of spontaneous
interrupts. (This is especially likely on hardware like 965gm where
display fifo underruns are continuous and the GMCH cannot filter that
interrupt souce.) As we enable our IRQ early so that we can use it
during hardware probing, our interrupt handler must be prepared to
handle a few sources prior to being fully configured. As such, we need
to add a simple is-ready check prior to dereferencing our KMS state for
reporting underruns.

Reported-by: Rob Clark <rclark@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1193972
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
[Jani: dropped the extra !]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-03-04 10:04:19 +02:00
Daniel Vetter
9128b040eb drm/i915: Fix modeset state confusion in the load detect code
This is a tricky story of the new atomic state handling and the legacy
code fighting over each another. The bug at hand is an underrun of the
framebuffer reference with subsequent hilarity caused by the load
detect code. Which is peculiar since the the exact same code works
fine as the implementation of the legacy setcrtc ioctl.

Let's look at the ingredients:

- Currently our code is a crazy mix of legacy modeset interfaces to
  set the parameters and half-baked atomic state tracking underneath.
  While this transition is going we're using the transitional plane
  helpers to update the atomic side (drm_plane_helper_disable/update
  and friends), i.e. plane->state->fb. Since the state structure owns
  the fb those functions take care of that themselves.

  The legacy state (specifically crtc->primary->fb) is still managed
  by the old code (and mostly by the drm core), with the fb reference
  counting done by callers (core drm for the ioctl or the i915 load
  detect code). The relevant commit is

  commit ea2c67bb4a
  Author: Matt Roper <matthew.d.roper@intel.com>
  Date:   Tue Dec 23 10:41:52 2014 -0800

      drm/i915: Move to atomic plane helpers (v9)

- drm_plane_helper_disable has special code to handle multiple calls
  in a row - it checks plane->crtc == NULL and bails out. This is to
  match the proper atomic implementation which needs the crtc to get
  at the implied locking context atomic updates always need. See

  commit acf24a395c
  Author: Daniel Vetter <daniel.vetter@ffwll.ch>
  Date:   Tue Jul 29 15:33:05 2014 +0200

      drm/plane-helper: transitional atomic plane helpers

- The universal plane code split out the implicit primary plane from
  the CRTC into it's own full-blown drm_plane object. As part of that
  the setcrtc ioctl (which updated both the crtc mode and primary
  plane) learned to set crtc->primary->crtc on modeset to make sure
  the plane->crtc assignments statate up to date in

  commit e13161af80
  Author: Matt Roper <matthew.d.roper@intel.com>
  Date:   Tue Apr 1 15:22:38 2014 -0700

      drm: Add drm_crtc_init_with_planes() (v2)

  Unfortunately we've forgotten to update the load detect code. Which
  wasn't a problem since the load detect modeset is temporary and
  always undone before we drop the locks.

- Finally there is a organically grown history (i.e. don't ask) around
  who sets the legacy plane->fb for the various driver entry points.
  Originally updating that was the drivers duty, but for almost all
  places we've moved that (plus updating the refcounts) into the core.
  Again the exception is the load detect code.

Taking all together the following happens:
- The load detect code doesn't set crtc->primary->crtc. This is only
  really an issue on crtcs never before used or when userspace
  explicitly disabled the primary plane.

- The plane helper glue code short-circuits because of that and leaves
  a non-NULL fb behind in plane->state->fb and plane->fb. The state
  fb isn't a real problem (it's properly refcounted on its own), it's
  just the canary.

- Load detect code drops the reference for that fb, but doesn't set
  plane->fb = NULL. This is ok since it's still living in that old
  world where drivers had to clear the pointer but the core/callers
  handled the refcounting.

- On the next modeset the drm core notices plane->fb and takes care of
  refcounting it properly by doing another unref. This drops the
  refcount to zero, leaving state->plane now pointing at freed memory.

- intel_plane_duplicate_state still assume it owns a reference to that
  very state->fb and bad things start to happen.

Fix this all by applying the same duct-tape as for the legacy setcrtc
ioctl code and set crtc->primary->crtc properly.

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Paulo Zanoni <przanoni@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-03 09:04:33 -08:00
Daniel Vetter
f89fe1ffe6 drm/i915: Update DRIVER_DATE to 20150227
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-27 19:12:46 +01:00
Chris Wilson
e8dec1dde0 drm/i915: Clarify obj->map_and_fenceable
For an object right on the boundary of mappable space, as the fenceable
size is stricly greater than the actual size, its fence region may extend
out of mappable space.

Note that only pnv/g33 has fence_size > obj.size and an unmappable
range in the gtt, and there alignment constraints prevent bad things
from happening.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Clarify why this shouldn't change anything as per the
discussion on intel-gfx.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-27 19:01:48 +01:00
Tvrtko Ursulin
9a8f0a1290 drm/i915/skl: Allow Y (and Yf) frame buffer creation
By this patch all underlying bits have been implemented and this
patch actually enables the feature.

v2: Validate passed in fb modifiers to reject garbage. (Daniel Vetter)
v3: Rearrange validation checks per code review comments. (Daniel Vetter)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-27 18:10:56 +01:00
Tvrtko Ursulin
0fda65680e drm/i915/skl: Update watermarks for Y tiling
Display watermarks need different programming for different tiling
modes.

Set the relevant flag so this happens during the plane commit and
add relevant data into a structure made available to the watermark
computation code.

v2: Pass in tiling info to sprite plane updates as well.
v3: Rebased for plane handling changes.
v4: Handle fb == NULL when plane is disabled.
v5: Refactored for addfb2 interface.
v6: Refactored for fb modifier changes.
v7: Updated for atomic commit by only updating watermarks when tiling changes.
v8: BSpec watermark calculation updates.
v9: Restrict scope of y_tile_minimum variable. (Damien Lespiau)
v10: Get fb from plane state otherwise we are working on old state.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Acked-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> (v9)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-27 18:10:56 +01:00
Tvrtko Ursulin
d4c2aa60de drm/i915/skl: Updated watermark programming
Recent BSpect updates have changed the watermark calculation to avoid
display flickering in some cases.

v2: Fix check against DDB allocation and tidy the code a bit. (Damien Lespiau)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-27 18:10:55 +01:00
Damien Lespiau
40f4628391 drm/i915/skl: Adjust get_plane_config() to support Yb/Yf tiling
v2: Rebased for addfb2 interface and consolidated a bit. (Tvrtko Ursulin)
v3: Rebased for fb modifier changes. (Tvrtko Ursulin)
v4: Use intel_fb_stride_alignment instead of open coding. (Damien Lespiau)

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-27 18:10:55 +01:00
Damien Lespiau
1327b9a1d5 drm/i915/skl: Teach pin_and_fence_fb_obj() about Y tiling constraints
1Mb!

v2: Rebased for addfb2 interface. (Tvrtko Ursulin)
v3: Rebased for fb modifier changes. (Tvrtko Ursulin)

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-27 18:10:55 +01:00
Damien Lespiau
b5d0e9bfa6 drm/i915/skl: Adjust intel_fb_align_height() for Yb/Yf tiling
We now need the bpp of the fb as Yf tiling has different tile widths
depending on it.

v2: Rebased for the new addfb2 interface. (Tvrtko Ursulin)
v3: Rebased for fb modifier changes. (Tvrtko Ursulin)
v4: Added missing case and 128-bit pixel warning. (Damien Lespiau)

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> (v3)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-27 18:10:54 +01:00
Damien Lespiau
b321803dfb drm/i915/skl: Allow scanning out Y and Yf fbs
Skylake is able to scannout those tiling formats. We need to allow them
in the ADDFB ioctl and tell the harware about it.

v2: Rebased for addfb2 interface. (Tvrtko Ursulin)
v3: Rebased for fb modifier changes. (Tvrtko Ursulin)
v4: Don't allow Y tiled fbs just yet. (Tvrtko Ursulin)
v5: Check for stride alignment and max pitch. (Tvrtko Ursulin)
v6: Simplify maximum pitch check. (Ville Syrjälä)
v7: Drop the gen9 check since requirements are no different. (Ville Syrjälä)
v8: Gen2 has different X tiling stride. (Ville Syrjälä)

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> (v7)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-27 18:10:54 +01:00
Daniel Vetter
3f52c6edf7 drm/i915: Remove DRIVER_MODESET checks from modeset code
Mostly just checks in i915-private modeset ioctls.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-27 18:10:53 +01:00
Daniel Vetter
8634bd4aea drm/i915: Remove regfile code&data for UMS suspend/resume
Lots of lines to remove!

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[danvet: Fixup makefile.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-27 18:10:39 +01:00
Daniel Vetter
1d03184c7b drm/i915: Remove DRIVER_MODESET checks from gem code
Hooray!

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-27 15:05:30 +01:00
Daniel Vetter
33d30a9c5e drm/i915: Remove DRIVER_MODESET checks in the gpu reset code
Again, good riddance to UMS!

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-27 14:58:08 +01:00
Daniel Vetter
d581893853 drm/i915: Remove DRIVER_MODESET checks from suspend/resume code
UMS is dead, yay!

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-27 14:57:58 +01:00
Daniel Vetter
17fa6463aa drm/i915: Remove DRIVER_MODESET checks in load/unload/close code
UMS is gone, this is dead code.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-27 14:57:39 +01:00
Dan Carpenter
686135da90 drm/i915: fix a printk format
This printk leads to the following Smatch warning:

	drivers/gpu/drm/i915/i915_gem_gtt.c:336 alloc_pt_range()
		error: '%pa' expects argument of type 'phys_addr_t*',
		argument 5 has type 'struct i915_page_table_entry*'

It looks like a simple typo to me where "%p" was intended instead of
"%pa".

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-26 20:21:38 +01:00
Ville Syrjälä
626ad6f37d drm/i915: Add media rc6 residency file to sysfs
On VLV/CHV the media well rc6 residency gets reported separately
from the render well, so add another file to sysfs so that we can
report the residency to the user.

Testcase: igt/pm_rc6_residency --run-subtest media-rc6-accuracy
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-26 17:48:00 +01:00
Michel Thierry
719cd21ced drm/i915: Add missing description to parameter in alloc_pt_range
The patch "drm/i915: Plumb drm_device through page tables operations"
added an extra parameter, but it didn't update the function description.
Also remove unnecessary blank line added by the same patch.

Found by kbuild test robot.

Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-26 14:30:26 +01:00
Akash Goel
bc4d91f699 drm/i915: Removed the read of RP_STATE_CAP from sysfs/debugfs functions
The frequency values(Rp0, Rp1, Rpn) reported by RP_STATE_CAP register
are stored, initially by the Driver, inside the dev_priv->rps structure.
Since these values are expected to remain same throughout, there is no real
need to read this register, on dynamic basis, from certain debugfs/sysfs
functions and the values can be instead retrieved from the dev_priv->rps
structure when needed.
For the i915_frequency_info debugfs interface, the frequency values from the
RP_STATE_CAP register only should be used, to indicate the actual Hw state,
since it is principally used for the debugging purpose.

v2: Reverted the changes in i915_frequency_info function, to continue report
    back the frequency values, as per the actual Hw state (Chris)

Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-26 14:29:21 +01:00
Ander Conselvan de Oliveira
b4f2bf4c02 drm/i915: Look at staged config when fixing pipe_src_w for LVDS
The code in function intel_crtc_compute_config() that evens pipe_src_w
if necessary would look at the current config instead of the staged one
when deciding if there is an LVDS encoder in use. This could potentially
lead to the value not being updated, if during the modeset a crtc wasn't
driving an LVDS encoder.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-26 14:26:43 +01:00
Dave Airlie
329414c4e7 Merge tag 'topic/drm-misc-2015-02-25' of git://anongit.freedesktop.org/drm-intel into drm-next
misc atomic and dp macros

* tag 'topic/drm-misc-2015-02-25' of git://anongit.freedesktop.org/drm-intel:
  drm: Adding edp1.4 specific dpcd macros
  drm/atomic-helpers: make mode_set hooks optional
  drm/atomic-helper: Rename commmit_post/pre_planes
  drm/atomic: Rename drm_atomic_helper_commit_pre_planes() state argument
  drm: If available use atomic state in getcrtc ioctl
  drm: Add DRM_DEBUG_ATOMIC
  drm/atomic-helpers: Fix documentation typos and wrong copy&paste
  drm: Fix the CRTC_STEREO_DOUBLE_ONLY define to include stero modes
  drm: Fix drm_crtc_vblank_get() documentation
2015-02-26 10:32:55 +10:00
Matt Roper
07878248a8 drm/i915: Ensure crtc_state backpointer is always initialized
As we transition to full atomic modesetting, we want to be able to pass
intel_crtc_state around in various places that we pass intel_crtc
directly today.  Ensure that the ->crtc backpointer is properly
initialized in case we need to get back to the associated CRTC.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-26 00:14:17 +01:00
Matt Roper
83d657388a drm/i915: Use enabled value from crtc_state rather than crtc (v2)
As vendors transition their drivers from legacy to atomic there's some
duplication of data between drm_crtc and drm_crtc_state (since
unconverted drivers likely won't have a state structure).

i915 is partially converted and does have a crtc->state structure, but
still uses direct crtc fields internally in many places, which causes
the two sets of data to get out of sync.  As of commit

        commit 31c946e85c
        Author: Daniel Vetter <daniel.vetter@ffwll.ch>
        Date:   Sun Feb 22 12:24:17 2015 +0100

            drm: If available use atomic state in getcrtc ioctl

            This way drivers fully converted to atomic don't need to update these
            legacy state variables in their modeset code any more.

            Reviewed-by: Rob Clark <robdclark@gmail.com>
            Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

the DRM core starts assuming that the presence of a ->state structure
implies that it should make use of the values stored there which, on
i915, leads to the core code using stale values for CRTC 'enabled'
status.

Let's switch over to using the state value of 'enable' internally rather
than using the drm_crtc field.  This ensures that our driver internals
are working from the same data that the DRM core is, avoiding
mismatches.

This patch was generated with Coccinelle using the following semantic
patch:

        <smpl>
        @@
        struct drm_crtc C;
        struct drm_crtc *CP;
        @@
        (
        - C.enabled
        + C.state->enable
        |
        - CP->enabled
        + CP->state->enable
        )

        // For assignments, we still update the legacy value as well as the state value
        // so add an extra assignment statement for that.
        @@
        struct drm_crtc C;
        struct drm_crtc *CP;
        expression E;
        @@
        (
          C.state->enable = E;
        + C.enabled = E;
        |
          CP->state->enable = E;
        + CP->enabled = E;
        )
        </smpl>

The crtc->mode and crtc->hwmode fields should probably be transitioned
over as well eventually, but we seem to do an okay job of keeping those
up-to-date already so I want to minimize the changes that will clash
with Ander's in-progress atomic work.

v2: Don't remove the assignments to the legacy value when we assign to
    the state value.  A second cocci stanza takes care of adding the
    legacy assignment back where appropriate.  (Daniel)

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-26 00:14:02 +01:00
John Harrison
98e1bd4ae6 drm/i915: Cache ringbuf pointer in request structure
In execlist mode, the ringbuf is a function of the ring and context whereas in
legacy mode, it is derived from the ring alone. Thus the calculation required to
determine the ringbuf pointer from the ring (and context) also needs to test
execlist mode or not. This is messy.

Further, the request structure holds a pointer to both the ring and the context
for which it was created. Thus, given a request, it is possible to derive the
ringbuf in either legacy or execlist mode. Hence it is necessary to pass just
the request in to all the low level functions rather than some combination of
request, ring, context and ringbuf. However, rather than recalculating it each
time, it is much simpler to just cache the ringbuf pointer in the request
structure itself.

Caching the pointer means the calculation is done once at request creation time
and all further code and simply read it directly from the request structure.

OTC-Jira: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
[danvet: Drop contentless comment in lrc alloc request entirely. And
spelling fix in the commit message.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25 22:53:10 +01:00
John Harrison
5e4be7bda1 drm/i915: Add missing trace point to LRC execbuff code path
There is a trace point in the legacy execbuffer execution path that is missing
from the execlist path. Trace points are extremely useful for debugging and are
used by various automated validation tests. Hence, this patch adds the missing
trace point back in.

OTC-Jira: VIZ-5115
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25 22:48:21 +01:00
John Harrison
8e004efc16 drm/i915: Rename 'flags' to 'dispatch_flags' for better code reading
There is a flags word that is passed through the execbuffer code path all the
way from initial decoding of the user parameters down to the very final dispatch
buffer call. It is simply called 'flags'. Unfortuantely, there are many other
flags words floating around in the same blocks of code. Even more once the GPU
scheduler arrives.

This patch makes it more obvious exactly which flags word is which by renaming
'flags' to 'dispatch_flags'. Note that the bit definitions for this flags word
already have an 'I915_DISPATCH_' prefix on them and so are not quite so
ambiguous.

OTC-Jira: VIZ-1587
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
[danvet: Resolve conflict with Chris' rework of the bb parsing.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25 22:43:29 +01:00
Michel Thierry
06dc68d680 drm/i915: Plumb drm_device through page tables operations
The next patch in the series will require it for alloc_pt_single.

v2: Rebased after s/page_tables/page_table/.

Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25 16:56:57 +01:00
Ben Widawsky
06fda602db drm/i915: Create page table allocators
As we move toward dynamic page table allocation, it becomes much easier
to manage our data structures if break do things less coarsely by
breaking up all of our actions into individual tasks.  This makes the
code easier to write, read, and verify.

Aside from the dissection of the allocation functions, the patch
statically allocates the page table structures without a page directory.
This remains the same for all platforms,

The patch itself should not have much functional difference. The primary
noticeable difference is the fact that page tables are no longer
allocated, but rather statically declared as part of the page directory.
This has non-zero overhead, but things gain additional complexity as a
result.

This patch exists for a few reasons:
1. Splitting out the functions allows easily combining GEN6 and GEN8
code. Page tables have no difference based on GEN8. As we'll see in a
future patch when we add the DMA mappings to the allocations, it
requires only one small change to make work, and error handling should
just fall into place.

2. Unless we always want to allocate all page tables under a given PDE,
we'll have to eventually break this up into an array of pointers (or
pointer to pointer).

3. Having the discrete functions is easier to review, and understand.
All allocations and frees now take place in just a couple of locations.
Reviewing, and catching leaks should be easy.

4. Less important: the GFP flags are confined to one location, which
makes playing around with such things trivial.

v2: Updated commit message to explain why this patch exists

v3: For lrc, s/pdp.page_directory[i].daddr/pdp.page_directory[i]->daddr/

v4: Renamed free_pt/pd_single functions to unmap_and_free_pt/pd (Daniel)

v5: Added additional safety checks in gen8 clear/free/unmap.

v6: Use WARN_ON and return -EINVAL in alloc_pt_range (Mika).

v7: Make err_out loop symmetrical to the way we allocate in
alloc_pt_range. Also s/page_tables/page_table and correct commit
message (Mika)

Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25 16:53:43 +01:00
Ben Widawsky
7324cc0491 drm/i915: Complete page table structures
Move the remaining members over to the new page table structures.

This can be squashed with the previous commit if desire. The reasoning
is the same as that patch. I simply felt it is easier to review if split.

v2: In lrc: s/ppgtt->pd_dma_addr[i]/ppgtt->pdp.page_directory[i].daddr/
v3: Rebase.
v4: Rebased after s/page_tables/page_table/.

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25 16:53:07 +01:00
Ben Widawsky
d7b3de9121 drm/i915: page table abstractions
When we move to dynamic page allocation, keeping page_directory and pagetabs as
separate structures will help to break actions into simpler tasks.

To help transition the code nicely there is some wasted space in gen6/7.
This will be ameliorated shortly.

Following the x86 pagetable terminology:
PDPE = struct i915_page_directory_pointer_entry.
PDE = struct i915_page_directory_entry [page_directory].
PTE = struct i915_page_table_entry [page_tables].

v2: fixed mismatches after clean-up/rebase.

v3: Clarify the names of the multiple levels of page tables (Daniel)

v4: Addressing Mika's review comments.
s/gen8_free_page_directories/gen8_free_page_directory and free the
page tables for the directory there.
In gen8_ppgtt_allocate_page_directories, do not leak previously allocated
pt in case the page_directory alloc fails.
Update error return handling in gen8_ppgtt_alloc.

v5: Do not leak pt on error in gen6_ppgtt_allocate_page_tables. (Mika)

v6: s/page_tables/page_table/. (Mika)

Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25 16:52:34 +01:00
Sonika Jindal
7ad14a29f0 drm/i915/skl: Add support for edp1.4 low vswing
Based upon vbt's vswing preemph settings value select the appropriate
translations for edp.

v2: Incorporating bspec changes for vswing and preemph levels, adding edp
translation table. Removed HSW from selection 9 which is specific to skl and
correcting the returning of level2 from max pre emph (Damien)

v3: Rebasing on top of renaming patches. Adding level(3,0) since level(2,2) as
mentioned in bspec is invalid as per edp spec. Also changed the determining of
size of the table selected (Satheesh).

v4: Adding level 3 in max voltage selection if low vswing is selected (Satheesh)

v5: Add a comment stating that skl_ddi_translations_edp is for eDP 1.4
    low vswing panels.

v6: Updating recommended DDI translation table for edp 1.4

Reviewed-by: Satheeshakrishna M <satheeshakrishna.m@intel.com> (v4)
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> (v6)
Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25 16:06:42 +01:00
Sonika Jindal
9a57f5bb71 drm/i915/skl: Support for edp low_vswing param in vbt
v2: Adding VBT version check for low_vswing field, and correcting parsing

v3: (Damien)
 - Restrain the scope of the 'vswing' variable
 - Use the more idiomatic "ev_priv->vbt.edp_low_vswing = vswing == 0;"
  instead of if (foo) var = true; else var = false;
 - Shorten edp_vswing_premph_setting to edp_vswing_premph to fit in 80 chars
 - Add the version from which the edp_vswing_premph field is valid in the
  struct definition

Reviewed-by: Satheeshakrishna M <satheeshakrishna.m@intel.com> (v2)
Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25 16:06:00 +01:00
Dan Carpenter
ba0635ffb7 drm/i915: cleanup some indenting
Static checkers complain that we should probably add curly braces
because, from the indenting, it looks like seq_printf() should be inside
the list_for_each_entry() loop.  But the code is actually correct, it's
just the indenting which is off.

Besides fixing the indenting on seq_printf(), I did add curly braces,
because generally mult-line indents should have curly braces to make
them more readable.

The unintended indent was left behind and not unindented in

commit d7f46fc4e7
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date:   Fri Dec 6 14:10:55 2013 -0800

    drm/i915: Make pin count per VMA
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-25 14:54:03 +01:00
Rodrigo Vivi
62e537f8d5 drm/i915: Fix frontbuffer false positve.
This return 0 without setting atomic bits on fb == crtc->cursor->fb
where causing frontbuffer false positives.

According to Daniel:

The original regression seems to have been introduced in the original
check/commit split:

commit 757f9a3e5b
Author: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Date:   Wed Sep 24 14:20:24 2014 -0300

    drm/i915: move check of intel_crtc_cursor_set_obj() out

Which already cause other trouble, resulting in the check getting moved in

commit e391ea882b
Author: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Date:   Wed Sep 24 14:20:25 2014 -0300

    drm/i915: Fix not checking cursor and object sizes

The frontbuffer tracking itself only was broken when we shifted it into
the check/commit logic with:

commit 32b7eeec4d
Author: Matt Roper <matthew.d.roper@intel.com>
Date:   Wed Dec 24 07:59:06 2014 -0800

    drm/i915: Refactor work that can sleep out of commit (v7)

v2: When putting more debug prints I notice the solution was simpler
than I thought. AMS design is solid, just this return was wrong.
Sorry for the noise.

v3: Remove the entire chunck that would probably
    be removed by gcc anyway. (by Daniel)

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-25 10:08:15 +02:00
Damien Lespiau
80958155d6 drm/i915/skl: Make sure to allocate mininum sizes in the DDB
I overlooked the fact that we need to allocate a minimum 8 blocks and
that just allocating the planes depending on how much they need to fetch
from the DDB in proportion of how much memory bw is necessary for the
whole display can lead to cases where we don't respect those minima (and
thus overrun).

So, instead, start by allocating 8 blocks to each active display plane
and then allocate the remaining blocks like before.

v2: Rebase on top of -nightly

Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-24 21:40:32 +01:00
Daniel Vetter
f37b5c2be8 drm/i915: Align initial plane backing objects correctly
Some bios really like to joke and start the planes at an offset ...
hooray!

Align start and end to fix this.

v2: Fixup calculation of size, spotted by Chris Wilson.

v3: Fix serious fumble I've just spotted.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86883
Cc: stable@vger.kernel.org
Cc: Johannes W <jargon@molb.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reported-and-tested-by: Johannes W <jargon@molb.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
[Jani: split WARN_ONs, rebase on v4.0-rc1]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-24 15:51:19 +02:00
Imre Deak
2dd2a883aa drm/i915: avoid processing spurious/shared interrupts in low-power states
Atm, it's possible that the interrupt handler is called when the device
is in D3 or some other low-power state. It can be due to another device
that is still in D0 state and shares the interrupt line with i915, or on
some platforms there could be spurious interrupts even without sharing
the interrupt line. The latter case was reported by Klaus Ethgen using a
Lenovo x61p machine (gen 4). He noticed this issue via a system
suspend/resume hang and bisected it to the following commit:

commit e11aa36230
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Wed Jun 18 09:52:55 2014 -0700

    drm/i915: use runtime irq suspend/resume in freeze/thaw

This is a problem, since in low-power states IIR will always read
0xffffffff resulting in an endless IRQ servicing loop.

Fix this by handling interrupts only when the driver explicitly enables
them and so it's guaranteed that the interrupt registers return a valid
value.

Note that this issue existed even before the above commit, since during
runtime suspend/resume we never unregistered the handler.

v2:
- clarify the purpose of smp_mb() vs. synchronize_irq() in the
  code comment (Chris)

v3:
- no need for an explicit smp_mb(), we can assume that synchronize_irq()
  and the mmio read/writes in the install hooks provide for this (Daniel)
- remove code comment as the remaining synchronize_irq() is self
  explanatory (Daniel)

v4:
- drm_irq_uninstall() implies synchronize_irq(), so no need to call it
  explicitly (Daniel)

Reference: https://lkml.org/lkml/2015/2/11/205
Reported-and-bisected-by: Klaus Ethgen <Klaus@Ethgen.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-24 15:47:17 +02:00
Chris Wilson
6c31a614c4 drm/i915: Check obj->vma_list under the struct_mutex
When we walk the list of vma, or even for protecting against concurrent
framebuffer creation, we must hold the struct_mutex or else a second
thread can corrupt the list as we walk it.

Fixes regression from
commit d7f46fc4e7
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date:   Fri Dec 6 14:10:55 2013 -0800

    drm/i915: Make pin count per VMA

References: https://bugs.freedesktop.org/show_bug.cgi?id=89085
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-24 15:30:42 +02:00
Nick Hoath
b3a38998f0 drm/i915: Fix a use after free, and unbalanced refcounting
When converting from implicitly tracked execlist queue items to ref counted
requests, not all frees of requests were replaced with unrefs, and extraneous
refs/unrefs of contexts were added.
Correct the unbalanced refcount & replace the frees.
Remove a noisy warning when hitting the request creation path.

drm_i915_gem_request and intel_context are both kref reference counted
structures. Upon allocation, drm_i915_gem_request's ref count should be
bumped using kref_init. When a context is assigned to the request,
the context's reference count should be bumped using i915_gem_context_reference.
i915_gem_request_reference will reduce the context reference count when
the request is freed.

Problem introduced in
commit 6d3d8274bc
Author:     Nick Hoath <nicholas.hoath@intel.com>
AuthorDate: Thu Jan 15 13:10:39 2015 +0000

     drm/i915: Subsume intel_ctx_submit_request in to drm_i915_gem_request

v2: Added comments explaining how the ctx pointer and the request object should
be ref-counted. Removed noisy warning.

v3: Cleaned up the language used in the commit & the header
description (Thanks David Gordon)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88652
Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Thomas Daniel <thomas.daniel@intel.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-24 15:18:37 +02:00
Ramalingam C
a1d263428a drm/i915: Enhancing eDP DRRS debug message
When Downclock mode is not found, the same info is added to the
corresponding debug log.

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-24 11:51:39 +01:00
Vandana Kannan
b33a281544 Documentation/drm: DocBook integration for DRRS
Adding an overview of DRRS in general and the implementation for eDP DRRS.
Also, describing the functions related to eDP DRRS.

Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-24 11:51:38 +01:00
Durgadoss R
44395bfe2f drm/i915: Enable eDP DRRS for CHV
This patch enables eDP DRRS for CHV by adding the
required IS_CHERRYVIEW() checks.
CHV uses the same register bit as VLV.

[Vandana]: Since CHV has 2 sets of M_N registers, it will follow the same code
path as gen < 8. Added CHV check in dp_set_m_n()

[Ram]: Rebased on top of previous patch modifications

Signed-off-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-24 11:51:38 +01:00
Vandana Kannan
6fa7aec1db drm/i915: Support for RR switching on VLV
Definition of VLV RR switch bit and corresponding toggling in
set_drrs function.

Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-24 11:51:37 +01:00
Vandana Kannan
a4c30b1d10 drm/i915/bdw: Add support for DRRS to switch RR
For Broadwell, there is one instance of Transcoder MN values per transcoder.
For dynamic switching between multiple refreshr rates, M/N values may be
reprogrammed on the fly. Link N programming triggers update of all data and
link M & N registers and the new M/N values will be used in the next frame
that is output.

V2: [By Ram]: intel_dp_set_m_n() is rewritten to accommodate
	gen >= 8 [Rodrigo]
V3: Coding style correction [Ram]
V4: [By Ram] intel_dp_set_m_n modifications are moved into a
	separate patch, retaining only DRRS related changes here [Rodrigo]

Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Signed-off-by: Pradeep Bhat <pradeep.bhat@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-24 11:51:37 +01:00
Ramalingam C
fe3cd48d6b drm/i915: Add support for DRRS in intel_dp_set_m_n
Till Gen 7 we have two sets of M_N registers, but Gen 8 onwards
we have only one M_N register set. To support DRRS on both scenarios
a input parameter to intel_dp_set_m_n is added.

In case of DRRS, When platform provides two set of M_N registers for dp,
we can program them with two different dividers and switch between them.
But when only one such register set is provided, we have to program
the required divider M_N value on that registers itself.

Two enum members M1_N1 and M2_N2 are defined to represent the above
scenarios.

M1_N1        :	Program dp_m_n on M1_N1 registers
			dp_m2_n2 on M2_N2 registers (If supported)

M2_N2        :	Program dp_m2_n2 on M1_N1 registers
			M2_N2 registers are not supported

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-24 11:51:36 +01:00
Thomas Daniel
b07da53c79 drm/i915: Shift driver's HWSP usage out of reserved range
As of Gen6, the general purpose area of the hardware status page has shrunk and
now begins at dword 0x30.  i915 driver uses dword 0x20 to store the seqno which
is now reserved.  So shift our HWSP dwords up into the general purpose range
before this bites us.

Note that all available documentation just says this is reserved
without going into details about what it's used for.

Signed-off-by: Thomas Daniel <thomas.daniel@intel.com>
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
[danvet: Add clarification from Thomas that unfortunately Bspec is
silent on what "reserverd" precisely means.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-24 11:50:32 +01:00
Daniel Vetter
1af434a928 drm/atomic-helper: Rename commmit_post/pre_planes
These names only make sense because of backwards compatability with
the order used by the crtc helper library. There's not really any real
requirement in the ordering here.

So rename them to something more descriptive and update the kerneldoc
a bit. Motivated in a discussion with Laurent about how to restore
plane state for dpms for drivers with runtime pm.

v2: Squash in fixup from Stephen Rothwell to fix a conflict with
tegra.

Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-02-24 01:57:46 +01:00
Thomas Daniel
3e5b6f05a2 drm/i915: Reset logical ring contexts' head and tail during GPU reset
Work was getting left behind in LRC contexts during reset.  This causes a hang
if the GPU is reset when HEAD==TAIL because the context's ringbuffer head and
tail don't get reset and retiring a request doesn't alter them, so the ring
still appears full.

Added a function intel_lr_context_reset() to reset head and tail on a LRC and
its ringbuffer.

Call intel_lr_context_reset() for each context in i915_gem_context_reset() when
in execlists mode.

Testcase: igt/pm_rps --run-subtest reset #bdw
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88096
Signed-off-by: Thomas Daniel <thomas.daniel@intel.com>
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
[danvet: Flatten control flow in the lrc reset code a notch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-24 00:19:37 +01:00
Damien Lespiau
b766879106 drm/i915/skl: Tune IZ hashing when subslices are unbalanced
When one EU is disabled in a particular subslice, we can tune how the
work is spread between subslices to improve EU utilization.

v2: - Use a bitfield to record which subslice(s) has(have) 7 EUs. That
      will also make the machinery work if several sublices have 7 EUs.
      (Jeff Mcgee)
    - Only apply the different hashing algorithm if the slice is
      effectively unbalanced by checking there's a single subslice with
      7 EUs. (Jeff Mcgee)

v3: Fix typo in comment (Jeff Mcgee)

Issue: VIZ-3845
Cc: Jeff Mcgee <jeff.mcgee@intel.com>
Reviewed-by: Jeff Mcgee <jeff.mcgee@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-24 00:07:05 +01:00
Paulo Zanoni
cb0a08c1ed drm/i915: don't reallocate the compressed FB at every frame
With the current code we just reallocate the compressed FB at every
FBC update: we have X in one frame, then in the other frame we need X
again, but we check "needed < have" instead of "needed <= have".

v2: Rebase after Jani addressed the other problems described in v1.

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-24 00:02:20 +01:00
Paulo Zanoni
e489e38e3f drm/i915: gen5+ can have FBC with multiple pipes
So allow it.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-23 23:59:57 +01:00
Paulo Zanoni
68b92147d5 drm/i915: HSW+ FBC is tied to pipe A
So add code to consider this case.

v2: Reorder the series, so drop the possible_framebuffer_bits chunk.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (v1)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-23 23:59:39 +01:00
Paulo Zanoni
9510675387 drm/i915: extract intel_fbc_find_crtc()
I want to make this code a little more complicated, so let's extract
the function first.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-23 23:59:28 +01:00
Jeff McGee
0cea6502bf drm/i915: Request full SSEU enablement on Gen9
On Gen9 the render power gating can leave slice/subslice/EU in
a partially enabled state. We must make an explicit request for
full SSEU enablement through the Render Power Clock State
register when resuming render work. This register is save/
restored in the logical ring context image for execlist
submission mode. Initialize its value in each LRC image to
request full enablement according to the device SSEU config.

Thanks to Sharma Ankitprasad and Akash Goel for highlighting the
issue and proposing the initial fix on which this patch is based.

v2: Adjusted the names of the power gating support flags to fit
    update of an earlier patch.

Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: "Akash Goel <akash.goel@intel.com>"
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-23 23:57:13 +01:00
Jeff McGee
7f992aba1e drm/i915/skl: Add SKL HW status to SSEU status
Add a new section to the 'i915_sseu_status' debugfs entry to
report the currently enabled counts of slice, subslice, and
execution units on the device. The count of enabled subslice
per slice represents the most enabled subslice on any one
slice for devices where imbalances may exist. Similarly, the
count of enabled EU per subslice represents the most enabled
EU on any one subslice.

Collect this device status for Skylake by reading the Gen9
power gate control ack message registers. Power gate control
operates on EU in pairs, therefore our reported counts of
enabled EU can be overestimated by one for each pair in which
one EU is fused-off.

Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-23 23:57:08 +01:00
Jeff McGee
3873218f35 drm/i915/skl: Determine SKL slice/subslice/EU info
Read fuse registers to determine the available slice total,
subslice total, subslice per slice, EU total, and EU per subslice
counts of the SKL device. The EU per subslice attribute is more
precisely defined as the maximum EU available on any one subslice,
since available EU counts may vary across subslices due to fusing.
Set flags indicating the SKL device's slice/subslice/EU (SSEU)
power gating capability. Make all values available via debugfs
entry 'i915_sseu_status'.

v2: Several small clean-ups suggested by Damien. Most notably,
    used smaller types for the new device info fields to reduce
    memory usage and improved the clarity/readability of the
    method used to extract attribute values from the fuse
    registers.

Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-23 23:56:59 +01:00
Damien Lespiau
d0bbbc4faf drm/i915/skl: Implement WaDisablePowerCompilerClockGating
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-23 17:31:15 +01:00
Vijay Purushothaman
9505e01acd drm/i915: Limit max VCO supported in CHV to 6.48GHz
As per the recommendation from PHY team, limit the max vco supported in CHV to 6.48 GHz

Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-23 17:12:13 +01:00
Vijay Purushothaman
d3eee4baa0 drm/i915: Add new PHY reg definitions for lock threshold
Added new PHY register definitions to control TDC buffer calibration and
digital lock threshold.

Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-23 17:10:51 +01:00
Chris Wilson
17cabf571e drm/i915: Trim the command parser allocations
Currently, the command parser tries to create a secondary batch exactly
as large as the original, and vmap both. This is open to abuse by
userspace using extremely large batch objects, but only executing very
short batches. For example, this would be if userspace were to implement
a command submission ringbuffer. However, we only need to allocate pages
for just the contents of the command sequence in the batch - all
relocations copied to the secondary batch will reference the original
batch and so there can be no access to the secondary batch outside of
the explicit execution region.

Testcase: igt/gem_exec_big #ivb,byt,hsw
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88308
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-23 17:07:40 +01:00
Dave Gordon
c32e3788ec drm/i915: FIFO space query code refactor
When querying the GTFIFOCTL register to check the FIFO space, the read value
must be masked. The operation is repeated explicitly in several places. This
change refactors the read-and-mask code into a function call.

v2: rebased on top of Mika's forcewake patch set, specifically:
	[PATCH 8/8] drm/i915: Enum forcewake domains and domain identifiers

Change-Id: Id1a9f3785cb20b82d4caa330c37b31e4e384a3ef
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-23 16:45:16 +01:00
Jani Nikula
cf6f0af9fb drm/i915: Dell Chromebook 11 has PWM backlight
Add quirk for Dell Chromebook 11 backlight.

Reported-and-tested-by: Owen Garland <garland.owen@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=93451
Acked-by: Damien Lespiau <damien.lespiau@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-23 15:12:49 +02:00
Jani Nikula
f75fb42a61 drm/i915/skl: handle all pixel formats in skylake_update_primary_plane()
skylake_update_primary_plane() did not handle all pixel formats returned
by skl_format_to_fourcc(). Handle alpha similar to skl_update_plane().

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89052
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-23 15:07:11 +02:00
Daniel Vetter
1e3feefd5a drm/i915: Switch to drm_crtc variants of vblank functions
Where possible right now. Just a small step towards nirvana ...

v2: git add. Uggh. Noticed by Imre.

Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-02-23 10:54:28 +01:00
Daniel Vetter
f3a5c3f62f drm/i915: Flatten DRIVER_MODESET checks in i915_irq.c
UMS is no more!

Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-02-23 10:54:27 +01:00
Daniel Vetter
1efa2e357e drm/i915: Drop pipe_enable checks in vblank funcs
With Ville's rework to use drm_crtc_vblank_on/off the core will take
care of rejecting drm_vblank_get calls when the pipe is off. Also the
core won't call the get_vblank_counter hooks in that case either. And
since we've dropped ums support recently we can now remove these
hacks, yay!

Noticed while trying to answer questions Laurent had about how the new
atomic helpers work.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-02-23 10:54:27 +01:00
Daniel Vetter
9625604ceb drm/irq: Add drm_crtc_vblank_reset
At driver load we need to tell the vblank code about the state of the
pipes, so that the logic around reject vblank_get when the pipe is off
works correctly.

Thus far i915 used drm_vblank_off, but one of the side-effects of it
is that it also saves the vblank counter. And for that it calls down
into the ->get_vblank_counter hook. Which isn't really a good idea
when the pipe is off for a few reasons:
- With runtime pm the register might not respond.
- If the pipe is off some datastructures might not be around or
  unitialized.

The later is what blew up on gen3: We look at intel_crtc->config to
compute the vblank counter, and for a disabled pipe at boot-up that's
just not there. Thus far this was papered over by a check for
intel_crtc->active, but I want to get rid of that (since it's fairly
race, vblank hooks are called from all kinds of places).

So prep for that by adding a _reset functions which only does what we
really need to be done at driver load: Mark the vblank pipe as off,
but don't do any vblank counter saving or event flushing - neither of
that is required.

v2: Clarify the code flow slightly as suggested by Ville.

v3: Fix kerneldoc spelling, spotted by Laurent.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com> (v2)
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-02-23 10:53:38 +01:00
Rodrigo Vivi
0dc6f20b98 drm/i915/bdw: PCI IDs ending in 0xb are ULT.
When reviewing patch that fixes VGA on BDW Halo Jani noticed that
we also had other ULT IDs that weren't listed there.

So this follow-up patch add these pci-ids as halo and fix comments
on i915_pciids.h

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-23 11:31:18 +02:00
Linus Torvalds
796e1c5571 Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "This is the main drm pull, it has a shared branch with some alsa
  crossover but everything should be acked by relevant people.

  New drivers:
     - ATMEL HLCDC driver
     - designware HDMI core support (used in multiple SoCs).

  core:
     - lots more atomic modesetting work, properties and atomic ioctl
       (hidden under option)
     - bridge rework allows support for Samsung exynos chromebooks to
       work finally.
     - some more panels supported

  i915:
     - atomic plane update support
     - DSI uses shared DSI infrastructure
     - Skylake basic support is all merged now
     - component framework used for i915/snd-hda interactions
     - write-combine cpu memory mappings
     - engine init code refactored
     - full ppgtt enabled where execlists are enabled.
     - cherryview rps/gpu turbo and pipe CRC support.

  radeon:
     - indirect draw support for evergreen/cayman
     - SMC and manual fan control for SI/CI
     - Displayport audio support

  amdkfd:
     - SDMA usermode queue support
     - replace suballocator usage with more suitable one
     - rework for allowing interfacing to more than radeon

  nouveau:
     - major renaming in prep for later splitting work
     - merge arm platform driver into nouveau
     - GK20A reclocking support

  msm:
     - conversion to atomic modesetting
     - YUV support for mdp4/5
     - eDP support
     - hw cursor for mdp5

  tegra:
     - conversion to atomic modesetting
     - better suspend/resume support for child devices

  rcar-du:
     - interlaced support

  imx:
     - move to using dw_hdmi shared support
     - mode_fixup support

  sti:
     - DVO support
     - HDMI infoframe support

  exynos:
     - refactoring and cleanup, removed lots of internal unnecessary
       abstraction
     - exynos7 DECON display controller support

  Along with the usual bunch of fixes, cleanups etc"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (724 commits)
  drm/radeon: fix voltage setup on hawaii
  drm/radeon/dp: Set EDP_CONFIGURATION_SET for bridge chips if necessary
  drm/radeon: only enable kv/kb dpm interrupts once v3
  drm/radeon: workaround for CP HW bug on CIK
  drm/radeon: Don't try to enable write-combining without PAT
  drm/radeon: use 0-255 rather than 0-100 for pwm fan range
  drm/i915: Clamp efficient frequency to valid range
  drm/i915: Really ignore long HPD pulses on eDP
  drm/exynos: Add DECON driver
  drm/i915: Correct the base value while updating LP_OUTPUT_HOLD in MIPI_PORT_CTRL
  drm/i915: Insert a command barrier on BLT/BSD cache flushes
  drm/i915: Drop vblank wait from intel_dp_link_down
  drm/exynos: fix NULL pointer reference
  drm/exynos: remove exynos_plane_dpms
  drm/exynos: remove mode property of exynos crtc
  drm/exynos: Remove exynos_plane_dpms() call with no effect
  drm/i915: Squelch overzealous uncore reset WARN_ON
  drm/i915: Take runtime pm reference on hangcheck_info
  drm/i915: Correct the IOSF Dev_FN field for IOSF transfers
  drm/exynos: fix DMA_ATTR_NO_KERNEL_MAPPING usage
  ...
2015-02-16 15:48:00 -08:00
Daniel Vetter
d4495cbaa5 drm/i915: Update DRIVER_DATE to 20150214
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-14 00:41:35 +01:00
Andreas Ruprecht
cd5956c913 drm/i915: Remove references to previously removed UMS config option
Commit 03dae59c72 ("drm/i915: Ditch UMS config option") removed
CONFIG_DRM_I915_UMS from the Kconfig file, but i915_drv.c still
references this option in two #ifndef statements.

As an undefined config option will always be 'false', we can drop
the #ifndefs alltogether and adapt the printed error message.

This inconsistency was found with the undertaker tool.

Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
[danvet: Undo logging change as requested by Jani.]
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:40 +01:00
Damien Lespiau
a86eb582e3 drm/i915/skl: Use a LRI for WaDisableDgMirrorFixInHalfSliceChicken5
I have no idea how that crept in, but we need to do the write from the
ring and this is a masked register. Two fixes in 1!

Cc: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:39 +01:00
Damien Lespiau
35c8ce6ac5 drm/i915/skl: Fix always true comparison in a revision id check
It's always a good idea to keep static analysis happy (also because it
prompts doing the check like I proposed :), this time smatch complains:

drivers/gpu/drm/i915/intel_ringbuffer.c:891 gen9_init_workarounds() warn:
  always true condition '((->dev->pdev->revision) >= (0)) => (0-255 >= 0)'

That's because revision is a u8. Tweak a bit the condition then.

Cc: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:39 +01:00
Damien Lespiau
77719d28ae drm/i915/skl: Implement WaEnableLbsSlaRetryTimerDecrement
This W/A is put in a gen9 specific function because it may well be
needed on other gen9 platforms.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:38 +01:00
Damien Lespiau
183c6daceb drm/i915/skl: Implement WaSetDisablePixMaskCammingAndRhwoInCommonSliceChicken
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:38 +01:00
Mika Kuoppala
071c92de1d drm/i915: Add process identifier to requests
We use the pid of the process which opened our device when
we track which was the culprit of the gpu hang. But as that
file descriptor might get inherited, we might blame the
wrong process when we record the error state.

Track process identifiers in requests to always find
the correct offender.

v2: Track only user processes (Chris)

Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
[danvet: drop NULL check before put_pid as suggested by Chris.]
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:37 +01:00
Damien Lespiau
65ca7514e2 drm/i915/skl: Implement WaBarrierPerformanceFixDisable
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:37 +01:00
Damien Lespiau
e2db7071f1 drm/i915/skl: Implement WaCcsTlbPrefetchDisable:skl
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:36 +01:00
Damien Lespiau
2caa3b260a drm/i915/skl: Implement WaDisableChickenBitTSGBarrierAckForFFSliceCS
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:36 +01:00
Damien Lespiau
81e231afe7 drm/i915/skl: Implement WaDisableHDCInvalidation
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:35 +01:00
Damien Lespiau
8bc0ccf6b1 drm/i915/skl: Implement WaDisableLSQCROPERFforOCL
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:35 +01:00
Damien Lespiau
9370cd987e drm/i915/skl: Implement WaDisablePartialResolveInVc
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:34 +01:00
Damien Lespiau
8d20549410 drm/i915/skl: Introduce a SKL specific init_workarounds()
This function will host SKL-only W/As.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:34 +01:00
Damien Lespiau
8543747ce5 drm/i915/skl: Document that we implement WaRsClearFWBitsAtReset
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:33 +01:00
Damien Lespiau
9253c2e56b drm/i915/skl: Implement WaSetGAPSunitClckGateDisable
Let's also take the opportunity the remove the comment telling it's a
pre-prod W/A, it should be obvious from the stepping test.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:33 +01:00
Damien Lespiau
45db2194ac drm/i915/skl: Make the init clock gating function skylake specific
We'll gather cross-gen9 W/A in a separate function later.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:32 +01:00
Damien Lespiau
82ef822e65 drm/i915/skl: Provide a gen9 specific init_render_ring()
WaDisableAsyncFlipPerfMode isn't listed for SKL and
INSTPM_FORCE_ORDERING is MBZ so let's make a gen9 specific render init
function.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:32 +01:00
Damien Lespiau
6f97235b8b drm/i915/skl: Document the WM read latency W/A with its name
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:31 +01:00
Damien Lespiau
e25dca8613 drm/i915/skl: Also detect eDRAM on SKL
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:31 +01:00
Damien Lespiau
2db59d5307 drm/i915: Detect eDRAM with the enabled bit only
At the moment we compare the whole EDRAM_PRESENT/EDRAMCAP register value
to 1 while EDRAM_PRESENT is only bit 0 (the rest may be used to describe
eDRAM capabilities).

To be more future proof, only look at bit 0 to detect eDRAM presence.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:30 +01:00
Damien Lespiau
72603ec0e2 drm/i915: Remove the IS_SNB_GT1 define
The last (only?) user of this was removed in:

  commit 2208d655a9
  Author: Daniel Vetter <daniel.vetter@ffwll.ch>
  Date:   Fri Nov 14 09:25:29 2014 +0100

    drm/i915: drop WaSetupGtModeTdRowDispatch:snb

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:30 +01:00
Damien Lespiau
f63bdb5f09 drm/i915: Make intel_unpin_fb_obj() static
This function is not used outside of intel_display.c since;

  commit cf4c7c1225
  Author: Matt Roper <matthew.d.roper@intel.com>
  Date:   Thu Dec 4 10:27:42 2014 -0800

      drm/i915: Make all plane disables use 'update_plane' (v5)

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:29 +01:00
Damien Lespiau
c2af70e2c9 drm/i915: Make intel_dp_unpack_aux() static
This was introduced in:

  commit 0bc12bcb1b
  Author: Rodrigo Vivi <rodrigo.vivi@intel.com>
  Date:   Fri Nov 14 08:52:28 2014 -0800

      drm/i915: Introduce intel_psr.c

But the unpack function is unused at this date.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:29 +01:00
Damien Lespiau
a51462004d drm/i915: Make intel_dp_check_link_status() static
This function is only used in intel_dp.c since:

  commit 0e32b39cee
  Author: Dave Airlie <airlied@redhat.com>
  Date:   Fri May 2 14:02:48 2014 +1000

      drm/i915: add DP 1.2 MST support (v0.7)

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:29 +01:00
Damien Lespiau
183c990673 drm/i915: Make intel_logical_ring_advance_and_submit() static
This function is only used in intel_lrc.c, so restrict it to that file. The
function was moved around to avoid a forward declaration and group it with its
user.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:28 +01:00
Damien Lespiau
cef437ad22 drm/i915: Make intel_lr_context_render_state_init() static
This function is only used in intel_lrc.c, so restrict it to that file. The
function was moved around to avoid a forward declaration and group it with its
user.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:28 +01:00
Damien Lespiau
a01c7162ca drm/i915: Remove intel_dsi_cmd.h
This header has been unusued since:

  commit 063c86f60a
  Author: Jani Nikula <jani.nikula@intel.com>
  Date:   Fri Jan 16 14:27:27 2015 +0200

      drm/i915/dsi: remove intel_dsi_cmd.c and the unused functions therein

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:27 +01:00
Damien Lespiau
af75f26918 drm/i915: Make intel_ring_setup_status_page() static
This function is only used in intel_ringbuffer.c, so restrict it to that
file. The function was moved around to avoid a forward declaration and
group it with its user.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Squash in fixup from Wu Fengguang.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:27 +01:00
Damien Lespiau
a2f8aeb328 drm/i915: Garbage collect orphaned prototypes
There have been quite a bit of development lately, leaving behing lonely
protypes. Time to bid them farewell.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:26 +01:00
Yu Zhang
71ba2d6432 drm/i915: Support alias ppgtt in VM if ppgtt is enabled
The current Intel GVT-g only supports alias ppgtt. And the
emulation is done in the host by first trapping PP_DIR_BASE
mmio accesses. Updating PP_DIR_BASE by using instructions such
as MI_LOAD_REGISTER_IMM are hard to detect and are not supported
in current code. Therefore this patch also adds a new callback
routine - vgpu_mm_switch() to set the PP_DIR_BASE by mmio writes.

v2:
take Chris' comments:
        - move the code into sanitize_enable_ppgtt()
v4:
take Tvrtko's comments:
        - fix the parenthesis alignment warning

Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:26 +01:00
Yu Zhang
3be0bf5acc drm/i915: Create vGPU specific MMIO operations to reduce traps
In the virtualized environment, forcewake operations are not
necessary for the driver, because mmio accesses will be trapped
and emulated by the host side, and real forcewake operations are
also done in the host. New mmio access handlers are added to directly
call the __raw_i915_read/write, therefore will reduce many traps and
increase the overall performance for drivers running in the VM with
Intel GVT-g enhancement.

v2:
take Chris' comments:
        - register the mmio hooks in intel_uncore_init()
v3:
take Daniel's comments:
        - use macros to assign mmio write functions for vGPU
v4:
take Tvrtko's comments:
        - also use mmio hooks for read operations

Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>k
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:25 +01:00
Yu Zhang
f61018b1fe drm/i915: Disable power management for i915 driver in VM
With Intel GVT-g, GPU power management is controlled by
host driver, so there is no need to provide virtualized
GPU PM support. In the future it might be useful to gather
VM input for freq boost, but now let's disable it simply.

v2:
take Chris' comments:
        - do not special case this to gen6+

Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:25 +01:00
Yu Zhang
e21fd552ff drm/i915: Add the display switch logic for vGPU in i915 driver
Display switch logic is added to notify the host side that
current vGPU have a valid surface to show. It does so by
writing the display_ready field in PV INFO page, and then
will be handled in the host side. This is useful to avoid
trickiness when the VM's framebuffer is being accessed in
the middle of VM modesetting, e.g. compositing the framebuffer
in the host side.

v2:
        - move the notification code outside the 'else' in load sequence
        - remove the notification code in intel_crtc_set_config()

v4:
        - code rebase, no need to define another dev_priv
        - use #define instead of enum for display readiness

Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhiyuan Lv <zhiyuan.lv@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:24 +01:00
Yu Zhang
bd49234b6a drm/i915: Disable framebuffer compression for i915 driver in VM
Framebuffer compression is disabled when driver detects it's
running in a Intel GVT-g enlightened VM, because FBC is not
emulated and there is no stolen memory for a vGPU.

v2:
take Chris' comments:
        - move the code into intel_update_fbc()

v4:
take Tvrtko's comments:
        - rebase the code into intel_fbc_update()

Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhiyuan Lv <zhiyuan.lv@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:24 +01:00
Yu Zhang
eb82289a1f drm/i915: Partition the fence registers for vGPU in i915 driver
With Intel GVT-g, the fence registers are partitioned by multiple
vGPU instances in different VMs. Routine i915_gem_load() is modified
to reset the num_fence_regs, when the driver detects it's running in
a VM. Accesses to the fence registers from vGPU will be trapped and
remapped by the host side. And the allocated fence number is provided
in PV INFO page structure. By now, the value of fence number is fixed,
but in the future we can relax this limitation, to allocate the fence
registers dynamically from host side.

Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:23 +01:00
Yu Zhang
5dda8fa356 drm/i915: Adds graphic address space ballooning logic
With Intel GVT-g, the global graphic memory space is partitioned by
multiple vGPU instances in different VMs. The ballooning code is called
in i915_gem_setup_global_gtt(), utilizing the drm mm allocator APIs to
mark the graphic address space which are partitioned out to other vGPUs
as reserved. With ballooning, host side does not need to translate a
grahpic address from guest view to host view. By now, current implementation
only support the static ballooning, but in the future, with more cooperation
from guest driver, the same interfaces can be extended to grow/shrink the
guest graphic memory dynamically.

v2:
take Chris and Daniel's comments:
	- no guard page between different VMs
	- use drm_mm_reserve_node() to do the reservation for ballooning,
	instead of the previous drm_mm_insert_node_in_range_generic()

v3:
take Daniel's comments:
	- move ballooning functions into i915_vgpu.c
	- add kerneldoc to ballooning functions

v4:
take Tvrtko's comments:
	- more accurate comments and commit message

Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:23 +01:00
Yu Zhang
cf9d2890da drm/i915: Introduce a PV INFO page structure for Intel GVT-g.
Introduce a PV INFO structure, to facilitate the Intel GVT-g
technology, which is a GPU virtualization solution with mediated
pass-through. This page contains the shared information between
i915 driver and the host emulator. For now, this structure utilizes
an area of 4K bytes on HSW GPU's unused MMIO space. Future hardware
will have the reserved window architecturally defined, and layout
of the page will be added in future BSpec.

The i915 driver load routine detects if it is running in a VM by
reading the contents of this PV INFO page. Thereafter a flag,
vgpu.active is set, and intel_vgpu_active() is used by checking
this flag to conclude if GPU is virtualized with Intel GVT-g. By
now, intel_vgpu_active() will return true, only when the driver
is running as a guest in the Intel GVT-g enhanced environment on
HSW platform.

v2:
take Chris' comments:
        - call the i915_check_vgpu() in intel_uncore_init()
        - sanitize i915_check_vgpu() by adding BUILD_BUG_ON() and debug info
take Daniel's comments:
        - put the definition of PV INFO into a new header - i915_vgt_if.h
other changes:
        - access mmio regs by readq/readw in i915_check_vgpu()

v3:
take Daniel's comments:
        - move the i915/vgt interfaces into a new i915_vgpu.c
        - update makefile
        - add kerneldoc to functions which are non-static
        - add a DOC: section describing some of the high-level design
        - update drm docbook
other changes:
        - rename i915_vgt_if.h to i915_vgpu.h

v4:
take Tvrtko's comments:
        - fix a typo in commit message
        - add debug message when vgt version mismatches
        - rename low_gmadr/high_gmadr to mappable/non-mappable in PV INFO
          structure

Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Signed-off-by: Eddie Dong <eddie.dong@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:22 +01:00
Zhi Wang
5baa22c59f drm/i915: Introduce bit definitions of CTXT_SR_CTRL register.
This patch introduces 2 bit definitions of context save/restore
control register.

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Suggested-by: Dave Gordon <david.s.gordon@intel.com>
Cc: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:22 +01:00
Tvrtko Ursulin
25bab385a0 drm/i915: Announce support for framebuffer modifiers
Let the DRM core know we can handle it.

v2: Change to boolean true. (Daniel Vetter)

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:21 +01:00
Tvrtko Ursulin
7b911adc92 drm/i915: Use fb modifiers in intel_pin_and_fence_fb_obj
And at the same time replace BUG() with a warning and handle it gracefuly.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:21 +01:00
Tvrtko Ursulin
6a418fcd84 drm/i915: Use fb modifiers in intel_check_cursor_plane
Also drop the mutex since with universal planes there is always a
proper framebuffer around which wraps the underlying bo. Which means
tiling is locked down. This was different in the old code which
directly took gem handles. The looking though was always cargo-cult
since races where not prevented in any way.

v2: Unconditionally enforce untiled, because cursors are always
untiled. The check for physical or gtt cursor is irrelevant. Also
clarify the commit message a bit

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:20 +01:00
Tvrtko Ursulin
66ebf56714 drm/i915/skl: Use fb modifiers for sprites
While at it just outright remove the tiling check in
intel_check_sprite_plane because it's impossible: We only allow
untiled and X-tiled. This essentially reverts

commit 94c6419ed8
Author: Damien Lespiau <damien.lespiau@intel.com>
Date:   Mon Oct 29 15:14:51 2012 +0000

    drm/i915: Error out when trying to set a y-tiled as a sprite

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
[danvet: Drop the hunk in check_sprite, it's impossible.]
Cc: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:20 +01:00
Tvrtko Ursulin
ba343e029e drm/i915/skl: CS flips are not supported with execlists
And skl only works in execlist mode, not in legacy ring submission.

Therefore remove dead code.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:19 +01:00
Daniel Vetter
30af77c4c8 drm/i915: Use fb format modifiers in skylake_update_primary_plane
Just a little demo really. We probably need to introduce skl specific
functions for a lot of the format validation stuff, or at least
helpers. Specifically I think intel_framebuffer_init and
intel_fb_align_height must be adjusted to have an i915_ and a skl_
variant. And only shared code should be converted to fb modifiers,
platform code (like the plane config readout can keep on using old
tiling_mode defines to avoid some churn).

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-02-13 23:28:19 +01:00
Daniel Vetter
091df6cbf2 drm/i915: Switch intel_fb_align_height to fb format modifiers
With this we can treat the fb format modifier completely independently
from the fencing mode in obj->tiling_mode in the initial plane code.
Which means new tiling modes without any gtt fence are now fully
support in the core i915 driver code.

v2: Also add pixel_format while at it, we need this to compute the
height for the new tiling formats.

Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-02-13 23:28:18 +01:00
Daniel Vetter
18c5247e1e drm/i915: Set up fb format modifier for initial plane config
No functional changes yet since intel_framebuffer_init would have
fixed this up for us. But this is prep work to be able to handle new
tiling layouts in the initial plane config code.

Follow-up patches will start to make use of this and switch over to fb
modifiers where needed.

Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-02-13 23:28:18 +01:00
Tvrtko Ursulin
c1ca506d17 drm/i915: Show frame buffer modifier in debug info
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:17 +01:00
Daniel Vetter
2a80eada32 drm/i915: Add fb format modifier support
Currently we don't support anything but X tiled. And for an easier
transition it makes a lot of sense to just keep requiring that X tiled
is properly fenced.

Which means we need to do absolutely nothing in old code to support fb
modifiers, yay!

v2: Fix the Y tiling check, noticed by Tvrtko.

v3: Catch Y-tiled fb for legacy addfb again (Tvrtko) and explain why
we want X tiling to match in the comment.

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-02-13 23:28:17 +01:00
Tvrtko Ursulin
93b81f5102 drm/i915: Add tiled framebuffer modifiers
To be used from the new addfb2 extension.

v2:
- Drop Intel-specific untiled modfier.
- Move to drm_fourcc.h.
- Document layouts a bit and denote them as platform-specific and not
  useable for cross-driver sharing.
- Add Y-tiling for completeness.
- Drop special docstring markers to avoid confusing kerneldoc.

v3: Give Y-tiling a unique idea, noticed by Tvrtko.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v1)
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:16 +01:00
Damien Lespiau
35cb6f3b4e drm/i915/bdw: Implement WaForceContextSaveRestoreNonCoherent
v2: Reorder defines (Ben)
v3: More bikesheds, this time re-ordering comments! (Chris)

Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Resolve conflict.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:16 +01:00
Damien Lespiau
c57e355122 drm/i915: Support not having an init clock gating function defined
When enabling new platforms, we may not have any W/A to apply,
especially that, now, a bunch of them have to be done from the ring.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:15 +01:00
Paulo Zanoni
e35fef211b drm/i915: change dev_priv->fbc.plane to dev_priv->fbc.crtc
Since the mapping from CRTCs to planes is fixed, looking at the CRTC
is essentially the same as looking at the plane. Also, the next
patches wil start using the frontbuffer_bits macros, and they take the
pipe as the parameter instead of the plane, and this could differ on
gens 2 and 3.

Another nice thing is that we don't risk accidentally initializing
things to PLANE_A if we don't set the value before it is used for the
first time. But this shouldn't be a problem with the current code.

V2: Rebase.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (v1)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:15 +01:00
Paulo Zanoni
104618b336 drm/i915: don't keep reassigning FBC_UNSUPPORTED
This may save a few picoseconds on !HAS_FBC platforms. And it also
satisfies my OCD.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:14 +01:00
Paulo Zanoni
7cc6574600 drm/i915: don't try to find crtcs for FBC if it's disabled
.. because it would be a waste of time, so move the place where the
check is done. Also, with this we won't risk printing "more than one
pipe active, disabling compression" or "no output, disabling" when FBC
is actually disabled.

This patch also represents a small behavior difference when using
i915.powersave=0: it is now exactly the same as i915.enable_fbc=0 on
this part of the code.

V2: Rebase.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (v1)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:14 +01:00
Nick Hoath
203a571b21 drm/i915: gen 9 h/w w/a (WaEnableForceRestoreInCtxtDescForVCS)
Add:
WaEnableForceRestoreInCtxtDescForVCS

v2: Add stepping check.

v3: Fixed stepping check direction. Cleaned up indentation.

Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:13 +01:00
Nick Hoath
e90fff154e drm/i915: gen 9 h/w w/a Fix stepping check
Fixed the stepping check on WaDisableDgMirrorFixInHalfSliceChicken5
to be for the correct SOC (Skylake)

Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:13 +01:00
Ben Widawsky
17d5538d54 drm/i915/gen8: Un-hardcode number of page directories
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:12 +01:00
Ben Widawsky
c8c26622ae drm/i915: Setup less PPGTT on failed page_directory
The current code will both potentially print a WARN, and setup part of
the PPGTT structure. Neither of these harm the current code, it is
simply for clarity, and to perhaps prevent later bugs, or weird
debug messages.

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:12 +01:00
Ben Widawsky
766436004b drm/i915: Rename to GEN8_LEGACY_PDPES
In gen8, 32b PPGTT has always had one "pdp" (it doesn't actually have
one, but it resembles having one). The #define was confusing as is, and
using "PDPE" is a much better description.

sed -i 's/GEN8_LEGACY_PDPS/GEN8_LEGACY_PDPES/' drivers/gpu/drm/i915/*.[ch]

It also matches the x86 pagetable terminology:
PTE  = Page Table Entry - pagetable level 1 page
PDE  = Page Directory Entry - pagetable level 2 page
PDPE = Page Directory Pointer Entry - pagetable level 3 page

And in the near future (for 48b addressing):
PML4E = Page Map Level 4 Entry

v2: Expanded information about Page Directory/Table nomenclature.

Cc: Daniel Vetter <daniel@ffwll.ch>
CC: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:11 +01:00
Ben Widawsky
3393871441 drm/i915/trace: Fix offsets for 64b
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:11 +01:00
Hoath, Nicholas
13bea49c8b drm/i915/gen9: Implement WaForceEnableNonCoherent
v2: Don't add WaHdcDisableFetchWhenMasked. Add stepping check for
WaForceEnableNonCoherent

Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:10 +01:00
Hoath, Nicholas
1840481f53 drm/i915/gen9: Implement Wa4x4STCOptimizationDisable
Move Wa4x4STCOptimizationDisable to gen9_init_workarounds

v2: rebase

Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:10 +01:00
Nick Hoath
cac23df48a drm/i915/gen9: Implement WaEnableYV12BugFixInHalfSliceChicken7
Move WaEnableYV12BugFixInHalfSliceChicken7 to gen9_init_workarounds

v2: Add stepping check.

Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:09 +01:00
Hoath, Nicholas
3dcd020a8e drm/i915/gen9: Implement WaDisableSDEUnitClockGating
v2: Add stepping check for WaDisableSDEUnitClockGating.

Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Rebase.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:09 +01:00
Nick Hoath
8424171e13 drm/i915/gen9: h/w w/a: syncing dependencies between camera and graphics
This one doesn't have one of these nice cryptic names unfortunately.

v2: Added missing register bitmap

Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:08 +01:00
Nick Hoath
1de4582f98 drm/i915/gen9: Implement WaDisableDgMirrorFixInHalfSliceChicken5
Move WaDisableDgMirrorFixInHalfSliceChicken5 to gen9_init_workarounds

v2: Added stepping check

v3: Removed unused register bitmap

Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
[danvet: Bikesheds.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:08 +01:00
Hoath, Nicholas
ab0dfafefd drm/i915/gen9: Implement WaDisablePartialInstShootdown
v2: Dont add WaDisableThreadStallDopClockGating as not SKL WA. (Found
by Damien Lespiau)

Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Bikeshed commit message a bit as per Damien's suggestions.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:07 +01:00
Hoath, Nicholas
e90a21d45d drm/i915: ring w/a gen 9 revision definitions
Add Skylake stepping Revision IDs definitions.

v1: Use existing revision id.

Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: Use magic __I915__ and bikeshed #defines as suggested by
Damien.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:07 +01:00
Hoath, Nicholas
3b10653178 drm/i915: ring w/a initialisation for gen 9
Add framework for gen 9 HW WAs

v1: Changed SOC specific WA function to gen 9 common function (Req: Damien Lespiau)

Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:06 +01:00
Damien Lespiau
42a7b08812 drm/i915: Make sure the primary plane is enabled before reading out the fb state
We don't want to end up in a state where we track that the pipe has its
primary plane enabled when primary plane registers are programmed with
values that look possible but the plane actually disabled.

Refuse to read out the fb state when the primary plane isn't enabled.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:06 +01:00
Damien Lespiau
fb9981aa67 drm/i915: Fix atomic state when reusing the firmware fb
Right now, we get a warning when taking over the firmware fb:

  [drm:drm_atomic_plane_check] FB set but no CRTC

with the following backtrace:

  [<ffffffffa010339d>] drm_atomic_check_only+0x35d/0x510 [drm]
  [<ffffffffa0103567>] drm_atomic_commit+0x17/0x60 [drm]
  [<ffffffffa00a6ccd>] drm_atomic_helper_plane_set_property+0x8d/0xd0 [drm_kms_helper]
  [<ffffffffa00f1fed>] drm_mode_plane_set_obj_prop+0x2d/0x90 [drm]
  [<ffffffffa00a8a1b>] restore_fbdev_mode+0x6b/0xf0 [drm_kms_helper]
  [<ffffffffa00aa969>] drm_fb_helper_restore_fbdev_mode_unlocked+0x29/0x80 [drm_kms_helper]
  [<ffffffffa00aa9e2>] drm_fb_helper_set_par+0x22/0x50 [drm_kms_helper]
  [<ffffffffa050a71a>] intel_fbdev_set_par+0x1a/0x60 [i915]
  [<ffffffff813ad444>] fbcon_init+0x4f4/0x580

That's because we update the plane state with the fb from the firmware, but we
never associate the plane to that CRTC.

We don't quite have the full DRM take over from HW state just yet, so
fake enough of the plane atomic state to pass the checks.

v2: Fix the state on which we set the CRTC in the case we're sharing the
    initial fb with another pipe. (Matt)

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:05 +01:00
Damien Lespiau
2d14030b1a drm/i915: Store the initial framebuffer in initial_plane_config
At the moment we use crtc->base.primary->fb to hold the initial
framebuffer allocation, disregarding if it's valid or not.

This lead to believe we were actually updating the fb at this point, but
it's not true and we haven't even called drm_framebuffer_init() on this
fb.

Instead, let's store the state in struct intel_initial_plane_config
until we know we can reuse that framebuffer.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:05 +01:00
Damien Lespiau
f55548b5af drm/i915: Don't try to reference the fb in get_initial_plane_config()
Tvrtko noticed a new warning on boot:

  WARNING: CPU: 1 PID: 353 at include/linux/kref.h:47 drm_framebuffer_reference+0x6c/0x80 [drm]()
  Call Trace:
  [<ffffffff8161f10c>] dump_stack+0x4f/0x7b
  [<ffffffff81052caa>] warn_slowpath_common+0xaa/0xd0
  [<ffffffff81052d8a>] warn_slowpath_null+0x1a/0x20
  [<ffffffffa00d035c>] drm_framebuffer_reference+0x6c/0x80 [drm]
  [<ffffffffa01c0df7>] update_state_fb.isra.54+0x47/0x50 [i915]
  [<ffffffffa01ccd5c>] skylake_get_initial_plane_config+0x93c/0x950 [i915]
  [<ffffffffa01e8721>] intel_modeset_init+0x1551/0x17c0 [i915]
  [<ffffffffa02476e0>] i915_driver_load+0xed0/0x11e0 [i915]
  [<ffffffff81627aa1>] ? _raw_spin_unlock_irqrestore+0x51/0x70
  [<ffffffffa00ca8b7>] drm_dev_register+0x77/0x110 [drm]
  [<ffffffffa00cda3b>] drm_get_pci_dev+0x11b/0x1f0 [drm]
  [<ffffffff81098e3d>] ? trace_hardirqs_on+0xd/0x10
  [<ffffffff81627aa1>] ? _raw_spin_unlock_irqrestore+0x51/0x70
  [<ffffffffa0145276>] i915_pci_probe+0x56/0x60 [i915]
  [<ffffffff813ad59c>] pci_device_probe+0x7c/0x100
  [<ffffffff81466aad>] driver_probe_device+0x16d/0x380

We cannot take a reference at this point, not before
intel_framebuffer_init() and the underlying drm_framebuffer_init().

Introduced in:

  commit 706dc7b549175e47f23e913b7f1e52874a7d0f56
  Author: Matt Roper <matthew.d.roper@intel.com>
  Date:   Tue Feb 3 13:10:04 2015 -0800

      drm/i915: Ensure plane->state->fb stays in sync with plane->fb

v2: Don't move update_state_fb(). It was moved around because I
    originally put update_state_fb() in intel_alloc_plane_obj() before
    finding a better place. (Matt)

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:04 +01:00
Damien Lespiau
6bf129df6f drm/i915: Use an intermediate variable to avoid repeating ourselves
The code look slightly better this way and will ease the next commit,
changing where we take the fb pointer from.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:04 +01:00
Damien Lespiau
5ba76c41e5 drm/i915: Put update_state_fb() next to the fb update
update_state_fb() at the end of intel_find_plane_obj() is misleading as
it leads us to believe the update is done for all code path.

A successful call to intel_alloc_plane_obj() will return and
update_state_fb() is then only needed when we share a fb from another
CRTC. Put the update() function there then.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:03 +01:00
Jani Nikula
60ee5cd24c drm/i915/fbc: fix the check for already reserved fbc size
The check for previously reserved stolen space size for FBC in
i915_gem_stolen_setup_compression() did not take the compression
threshold into account. Fix this by storing and comparing to
uncompressed size instead.

The bug has been introduced in

commit 5e59f7175f
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date:   Mon Jun 30 10:41:24 2014 -0700

    drm/i915: Try harder to get FBC

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88975
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:03 +01:00
Damien Lespiau
719388e146 drm/i915/skl: Declare that GT3 has a second VCS
v2: leave intel_skylake_info alone (Rodrigo, Daniel)

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:02 +01:00
Satheeshakrishna M
94dd5138c5 drm/i915/skl: Implementation of SKL display power well support
This patch implements core logic of SKL display power well.

v2: Addressed Imre's comments
	- Added respective DDIs under power well #1 and #2
	- Simplified repetitive code in power well programming

v3: Implemented Imre's comments
	- Further simplified power well programming
	- Made sure that PW 1 is enabled prior to PW 2

v4: Fix minor conflict with the the cherryview support (Damien)

v5: Add the PLL power domain to the always on power well (Damien)

v6: Disable BIOS power well (Imre)
    Use power well data for comparison (Imre)
    Put the PLL power domain into PW1 as its needed for CDCLK (Satheesh,
    Damien)

v7: Addressed Imre's comments
  - Lowered the time out to 1ms
  - Added parantheses in macro
  - Moved debug message and fixed wait_for interval

v8:
  - Add a WARN() when swiching on an unknown power well (Imre, done by Damien)
  - Whitespace fixes (spaces instead of tabs) (Damien)

v9: (Imre, done by Damien)
  - Merge the register definitions with this patch
  - Merge the MISC IO power well in this patch

v10: (Imre, done by Damien)

  - Define the Misc I/O power domains to be the power well 1 ones as Misc I/O
    needs to be enabled with PW1
  - Added Transcoder A and VGA domains to PW 2
  - Remove the MISC_IO power domains as well in the the always on
    domains definition
  - Move Misc I/O power well at the top of the power well list so it's turned
    on right after PW1.

Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Satheeshakrishna M <satheeshakrishna.m@intel.com> (v3,v6,v7)
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:01 +01:00
Matt Roper
afd65eb4cc drm/i915: Ensure plane->state->fb stays in sync with plane->fb
plane->state->fb and plane->fb should always reference the same FB so
that atomic and legacy codepaths have the same view of display state.
In commit

        commit db068420560511de80ac59222644f2bdf278c3d5
        Author: Matt Roper <matthew.d.roper@intel.com>
        Date:   Fri Jan 30 16:22:36 2015 -0800

            drm/i915: Keep plane->state updated on pageflip

we already fixed one case where these two pointers could get out of
sync.  However it turns out there are a few other places (mainly dealing
with initial FB setup at boot) that directly set plane->fb and neglect
to update plane->state->fb.  If we never do a successful update through
the atomic pipeline, the RmFB cleanup code will look at the
plane->state->fb pointer, which has never actually been set to a
legitimate value, and try to clean it up, leading to BUG's.

Add a quick helper function to synchronize plane->state->fb with
plane->fb (and update reference counts accordingly) and call it
everywhere the driver tries to manually set plane->fb outside of the
atomic pipeline.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88909
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:01 +01:00
Damien Lespiau
62659920cf drm/i915/skl: Remove the check enforcing VCS2 to be gen8 only
We already track this in the intel_info struct.

Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[danvet: Make the commit message a bit less terse.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:00 +01:00
Shobhit Kumar
87c54d0ee6 drm/i915: Correct the variable holding the value for EOT to write
This isuue got introduced in -

commit 24ee0e6490
Author: Gaurav K Singh <gaurav.k.singh@intel.com>
Date:   Fri Dec 5 14:24:21 2014 +0530

    drm/i915: Update the DSI enable path to support dual

Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:28:00 +01:00
Ville Syrjälä
ffe02b403d drm/i915: Introduce intel_set_rps()
Replace the valleyview_set_rps() and gen6_set_rps() calls with
intel_set_rps() which itself does the IS_VALLEYVIEW() check. The
code becomes simpler since the callers don't have to do this check
themselves.

Most of the change was performe with the following semantic patch:
@@
expression E1, E2, E3;
@@
- if (IS_VALLEYVIEW(E1)) {
-  valleyview_set_rps(E2, E3);
- } else {
-  gen6_set_rps(E2, E3);
- }
+ intel_set_rps(E2, E3);

Adding intel_set_rps() and making valleyview_set_rps() and gen6_set_rps()
static was done manually. Also valleyview_set_rps() had to be moved a
bit avoid a forward declaration.

v2: Use a less greedy semantic patch

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:27:59 +01:00
Tvrtko Ursulin
ab8d66752a drm/i915: Track old framebuffer instead of object
Daniel Vetter spotted a bug while reviewing some of my refactoring in this
are of the code. I'll quote:

"""
> @@ -9764,6 +9768,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
>  	work->event = event;
>  	work->crtc = crtc;
>  	work->old_fb_obj = intel_fb_obj(old_fb);
> +	work->old_tiling_mode = to_intel_framebuffer(old_fb)->tiling_mode;

Hm, that's actually an interesting bugfix - currently userspace could be
sneaky and destroy the old fb immediately after the flip completes and the
change the tiling of the underlying object before the unpin work had a
chance to run (needs some fudgin with rt prios to starve workers to make
this work though).

Imo the right fix is to hold a reference onto the fb and not the
underlying gem object. With that tiling is guaranteed not to change.
"""

This patch tries to implement the above proposed change.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:27:59 +01:00
Matt Roper
3f678c96ab drm/i915: Switch planes from transitional helpers to full atomic helpers
There are two sets of helper functions provided by the DRM core that can
implement the .update_plane() and .disable_plane() hooks in terms of a
driver's atomic entrypoints.  The transitional helpers (which we have
been using so far) create a plane state and then use the plane's atomic
entrypoints to perform the atomic begin/check/prepare/commit/finish
sequence on that single plane only.  The full atomic helpers create a
top-level atomic state (which is capable of holding multiple object
states for planes, crtc's, and/or connectors) and then passes the
top-level atomic state through the full "atomic modeset" pipeline.

Switching from the transitional to full helpers here shouldn't result in
any functional change, but will enable us to exercise/test more of the
internal atomic pipeline with the legacy API's used by existing
applications.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:27:58 +01:00
Matt Roper
1ed1f968b6 drm/i915: Keep plane->state updated on pageflip
Until all drivers have transitioned to atomic, the framebuffer
associated with a plane is tracked in both plane->fb (for legacy) and
plane->state->fb (for all the new atomic codeflow).  All of our modeset
and plane updates use drm_plane->update_plane(), so in theory plane->fb
and plane->state->fb should always stay in sync and point at the same
thing for i915.  However we forgot about the pageflip ioctl case, which
currently only updates plane->fb and leaves plane->state->fb at a stale
value.

Surprisingly, this doesn't cause any real problems at the moment since
internally we use the plane->fb pointer in most of the places that
matter, and on the next .update_plane() call, we use plane->fb to figure
out which framebuffer to cleanup.  However when we switch to the full
atomic helpers for update_plane()/disable_plane(), those helpers use
plane->state->fb to figure out which framebuffer to cleanup, so not
having updated the plane->state->fb pointer causes things to blow up
following a pageflip ioctl.

The fix here is to just make sure we update plane->state->fb at the same
time we update plane->fb in the pageflip ioctl.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-13 23:27:58 +01:00
Dave Airlie
64aa7e342a Merge tag 'drm-intel-next-fixes-2015-02-11' of git://anongit.freedesktop.org/drm-intel into drm-next
Here's a batch of i915 fixes for drm-next, with more cc: stable material
than fixes specific to drm-next.

* tag 'drm-intel-next-fixes-2015-02-11' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Clamp efficient frequency to valid range
  drm/i915: Really ignore long HPD pulses on eDP
  drm/i915: Correct the base value while updating LP_OUTPUT_HOLD in MIPI_PORT_CTRL
  drm/i915: Insert a command barrier on BLT/BSD cache flushes
  drm/i915: Drop vblank wait from intel_dp_link_down
  drm/i915: Squelch overzealous uncore reset WARN_ON
  drm/i915: Take runtime pm reference on hangcheck_info
  drm/i915: Correct the IOSF Dev_FN field for IOSF transfers
  drm/i915: Prevent use-after-free in invalidate_range_start callback
2015-02-12 09:16:23 +10:00
Tom O'Rourke
46efa4abe5 drm/i915: Clamp efficient frequency to valid range
The efficient frequency (RPe) should stay in the range
RPn <= RPe <= RP0.  The pcode clamps the returned value
internally on Broadwell but not on Haswell.

Fix for missing range check in
commit 93ee29203f
Author: Tom O'Rourke <Tom.O'Rourke@intel.com>
Date:   Wed Nov 19 14:21:52 2014 -0800

    drm/i915: Use efficient frequency for HSW/BDW

Reference: http://lists.freedesktop.org/archives/intel-gfx/2015-February/059802.html
Reported-by: Michael Auchter <a@phire.org>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org # v3.19
Signed-off-by: Tom O'Rourke <Tom.O'Rourke@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-11 14:09:51 +02:00
Ville Syrjälä
a8b3d52f8b drm/i915: Really ignore long HPD pulses on eDP
Return IRQ_HANDLED from intel_dp_hpd_pulse() to properly
ignore the long HPD pulse on eDP to avoid the never ending
VDD off->HPD->VDD on->VDD off->HPD... cycle.

This fixes a regression intoduced by
 commit b2c5c181ed
 Author: Daniel Vetter <daniel.vetter@ffwll.ch>
 Date:   Fri Jan 23 06:00:31 2015 +0100

    drm/i915: Use symbolic irqreturn for ->hpd_pulse

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-11 14:09:51 +02:00
Shobhit Kumar
4ba7d93afe drm/i915: Correct the base value while updating LP_OUTPUT_HOLD in MIPI_PORT_CTRL
LP_OUTPUT_HOLD is only in MIPI_PORT_CTRL(PORT_A) even for PORT_C in case
of dual link. In the dual link implementation, the bit is correctly set
or unset for hardcoded PORT_A, but for bit update the register base value
is read by using MIPI_PORT_CTRL(port) in a loop. The second iteration will
read base value from PORT_C and program for PORT_A. Mostly in case of dual
link all other bit values should be same, but logically we should read from
PORT_A. So hardcode to read initial value from PORT_A as well.

Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-09 20:21:08 +02:00
Chris Wilson
f0a1fb10e5 drm/i915: Insert a command barrier on BLT/BSD cache flushes
This looked like an odd regression from

commit ec5cc0f9b0
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Thu Jun 12 10:28:55 2014 +0100

    drm/i915: Restrict GPU boost to the RCS engine

but in reality it undercovered a much older coherency bug. The issue that
boosting the GPU frequency on the BCS ring was masking was that we could
wake the CPU up after completion of a BCS batch and inspect memory prior
to the write cache being fully evicted. In order to serialise the
breadcrumb interrupt (and so ensure that the CPU's view of memory is
coherent) we need to perform a post-sync operation in the MI_FLUSH_DW.

v2: Fix all the MI_FLUSH_DW (bsd plus the duplication in execlists).

Also fix the invalidate_domains mask in gen8_emit_flush() for ring !=
VCS.

Testcase: gpuX-rcs-gpu-read-after-write
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-09 20:03:15 +02:00
Daniel Vetter
0ca0968554 drm/i915: Drop vblank wait from intel_dp_link_down
Nothing in Bspec seems to indicate that we actually needs this, and it
looks like can't work since by this point the pipe is off and so
vblanks won't really happen any more.

Note that Bspec mentions that it takes a vblank for this bit to
change, but _only_ when enabling.

Dropping this code quenches an annoying backtrace introduced by the
more anal checking since

commit 51e31d49c8
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Mon Sep 15 12:36:02 2014 +0200

    drm/i915: Use generic vblank wait

Note: This fixes the fallout from the above commit, but does not address
the shortcomings of the IBX transcoder select workaround implementation
discussed during review [1].

[1] http://mid.gmane.org/87y4o7usxf.fsf@intel.com

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86095
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: stable@vger.kernel.org # 3.19
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-09 18:52:12 +02:00
Mika Kuoppala
3225b2f95d drm/i915: Squelch overzealous uncore reset WARN_ON
We added this WARN_ON to guard against using uninitialized
forcewake domains. But forgot blissfully that not all
gens have forcewake domains in the first place.

v2: Move WARN_ON to fw_domains_init (Chris)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88911
Tested-by: Ding Heng <hengx.ding@intel.com> (v1)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[Jani: add comment above WARN_ON as suggested by Chris]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-09 14:35:49 +02:00
Mika Kuoppala
ebbc7546d2 drm/i915: Take runtime pm reference on hangcheck_info
We read the coherent current seqno and actual head from ring.
For hardware access we need to take runtime_pm reference.

Get hardware specific values with runtime reference held
and print them first to emphasize hw state vs bookkeepping.

v2: Reorder output according to hw access (Chris)
    remove superfluous locking (Daniel)

Testcase: igt/pm_rpm/debugfs-read
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88910
Tested-by: Ding Heng <hengx.ding@intel.com> (v1)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-09 14:29:36 +02:00
Shobhit Kumar
d180d2bbb6 drm/i915: Correct the IOSF Dev_FN field for IOSF transfers
As per the specififcation, the SB_DevFn is the PCI_DEVFN of the target
device and not the source. So PCI_DEVFN(2,0) is not correct. Further the
port ID should be enough to identify devices unless they are MFD. The
SB_DevFn was intended to remove ambiguity in case of these MFD devices.

For non MFD devices the recommendation for the target device IP was to
ignore these fields, but not all of them followed the recommendation.
Some like CCK ignore these fields and hence PCI_DEVFN(2, 0) works and so
does PCI_DEVFN(0, 0) as it works for DPIO. The issue came to light because
of GPIONC which was not getting programmed correctly with PCI_DEVFN(2, 0).
It turned out that this did not follow the recommendation and expected 0
in this field.

In general the recommendation is to use SB_DevFn as PCI_DEVFN(0, 0) for
all devices except target PCI devices.

Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-09 14:26:19 +02:00
Michał Winiarski
460822b0b1 drm/i915: Prevent use-after-free in invalidate_range_start callback
It's possible for invalidate_range_start mmu notifier callback to race
against userptr object release. If the gem object was released prior to
obtaining the spinlock in invalidate_range_start we're hitting null
pointer dereference.

Testcase: igt/gem_userptr_blits/stress-mm-invalidate-close
Testcase: igt/gem_userptr_blits/stress-mm-invalidate-close-overlap
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
[Jani: added code comment suggested by Chris]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-02-05 16:31:30 +02:00
Takashi Iwai
3fe9cf390f Merge branch 'topic/snd-device' into for-next 2015-02-03 17:57:16 +01:00
Daniel Vetter
b838cbee0d drm/i915: Remove bogus locking check in the hangcheck code
You can _never_ assert that a lock is not held, except in some very
restricted corner cases where it's guranteed that your code is running
single-threade (e.g. driver load before you've published any pointers
leading to that lock).

In addition the early return breaks a bunch of testcases since with
highly concurrent hangcheck stress tests the reset fails to work and
the test doesn't recover and time out.

This regression has been introduced in

commit b8d24a0656
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date:   Wed Jan 28 17:03:14 2015 +0200

    drm/i915: Remove nested work in gpu error handling

Aside: It is possible to check whether a given task doesn't hold a
lock, but only when lockdep is enabled, using the lockdep_assert_held
stuff.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88908
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-02-03 17:13:04 +01:00
Daniel Vetter
1293eaa3eb drm/i915: Update DRIVER_DATE to 20150130
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-30 22:37:54 +01:00
Ander Conselvan de Oliveira
0cb09a97d8 drm/i915: Use pipe_config's cpu_transcoder for reading encoder hw state
The get_config() functions for ddi and dp_mst, used to read the value
of cpu_transcoder from the crtc->config instead of the state passed as
an argument. On the hardware state readout path, that happens to work
since the proper value is written to it before encoder->get_config() is
called. However, in the check_crtc() path, the state will be read from
the cpu_transcoder in the software tracking, instead of the one just
read out from hw. Using the field in the supplied intel_crtc_state
should do the right thing in both cases.

v2: Fix intel_ddi_get_config() too. (Ander)

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-30 19:38:43 +01:00
Nick Hoath
f82107950e drm/i915: Fix a use-after-free in intel_execlists_retire_requests
Remove request from list before unreferencing it, in case it's actually
the only reference. (Found by Tvrtko Ursulin)

This issue has been most likely introduced in

commit 6d3d8274bc
Author: Nick Hoath <nicholas.hoath@intel.com>
Date:   Thu Jan 15 13:10:39 2015 +0000

    drm/i915: Subsume intel_ctx_submit_request in to drm_i915_gem_request

Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-30 19:38:13 +01:00
Ander Conselvan de Oliveira
ed6739efc9 drm/i915: Split shared dpll setup out of __intel_set_mode()
This simplifies __intel_set_mode() a little.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-30 17:31:30 +01:00
Mika Kuoppala
078595043b drm/i915: Don't do posting reads on getting forcewake
The checking for ack and also any subsequent mmio access
will serialize with setting the forcewake bit. Drop the
posting read as superfluous.

Note that in the put side we still want to keep the posting read
as it will ensure that the hw sees our forcewake release in a
timely manner and doesn't keep the hw powered up.

Comment from Chris:

On Wed, Jan 28, 2015 at 05:54:14PM +0200, Mika Kuoppala wrote:
> Ville Syrjälä <ville.syrjala@linux.intel.com> writes:
> > IIRC the posting read from same cache line actually fixed real bugs. So
> > I'm a bit worried about dropping them. But I suppose it's possible only
> > the _put side was important for those bugs.
>
> I found these:
>
> commit 6af2d180f8
> Author: Daniel Vetter <daniel.vetter@ffwll.ch>
> Date:   Thu Jul 26 16:24:50 2012 +0200
>
>     drm/i915: fix forcewake related hangs on snb
>
> commit 8dee3eea3c
> Author: Ben Widawsky <ben@bwidawsk.net>
> Date:   Sat Sep 1 22:59:50 2012 -0700
>
>     drm/i915: Never read FORCEWAKE
>
> https://bugs.freedesktop.org/show_bug.cgi?id=51738
> https://bugs.freedesktop.org/show_bug.cgi?id=52424
>
> The snb here seems to survive gem_dummy_reloc_loop and
> gem_ring_sync_loop in here with the get side posting removed.

Note that we kept the once associated with #52424, but judging by my
comments in #51738 the posting read is just a band aid anyway as a full
mb() itself was not adequate.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: paste relevant review discussion in.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-30 17:16:51 +01:00
Mika Kuoppala
f9b3927afb drm/i915: Do uncore early sanitize after domain init
intel_uncore_early_sanitize() will reset the forcewake registers. When
forcewake domains were introduced, the domain init was done after the
sanitization of the forcewake registers. And as the resetting of
registers use the domain accessors, we tried to reset the forcewake
registers with unitialized forcewake domains and failed.

Fix this by sanitizing after all the domains have been initialized. Do
per domain clearing of forcewake register on domain init so that
IVB can do early access to ECOBUS do determine the final configuration.

This regression was introduced in

commit 05a2fb157e
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date:   Mon Jan 19 16:20:43 2015 +0200

    drm/i915: Consolidate forcewake code

v2: Carve out ellc detect, fw_domain_reset for ivb/ecobus (Chris)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88805
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Olof Johansson <olof@lixom.net>
Tested-by: Darren Hart <dvhart@linux.intel.com> (v1)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-30 17:15:31 +01:00
Ville Syrjälä
21a11fff7c drm/i915: Handle CHV in vlv_set_rps_idle()
Move the CHV check into vlv_set_rps_idle() to simplify the caller a bit.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-30 17:09:39 +01:00
Mika Kuoppala
b8d24a0656 drm/i915: Remove nested work in gpu error handling
Now when we declare gpu errors only through our own dedicated
hangcheck workqueue there is no need to have a separate workqueue
for handling the resetting and waking up the clients as the deadlock
concerns are no more.

The only exception is i915_debugfs::i915_set_wedged, which triggers
error handling through process context. However as this is only used through
test harness it is responsibility for test harness not to introduce hangs
through both debug interface and through hangcheck mechanism at the same time.

Remove gpu_error.work and let the hangcheck work do the tasks it used to.

v2: Add a big warning sign into i915_debugfs::i915_set_wedged (Chris)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-29 18:03:07 +01:00
Jani Nikula
063c86f60a drm/i915/dsi: remove intel_dsi_cmd.c and the unused functions therein
The removed functions can be resurrected in intel_dsi.c as need arises.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-By: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-29 16:57:14 +01:00
Jani Nikula
a2581a9e7c drm/i915/dsi: move dpi_send_cmd() to intel_dsi.c and make it static
No functional changes.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-By: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-29 16:56:47 +01:00
Jani Nikula
55a194ddc7 drm/i915/dsi: remove old read/write functions in favor of new stuff
All of these are replaced by the drm core mipi dsi functions.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-By: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-29 16:52:03 +01:00
Jani Nikula
759d10c2e1 drm/i915/dsi: make the vbt panel driver use mipi_dsi_device for transfers
Use the drm core interfaces in preparation of removing our homebrew.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-By: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-29 16:51:50 +01:00
Jani Nikula
7e9804fdcf drm/i915/dsi: add drm mipi dsi host support
Add basic support for using the drm mipi dsi framework for DSI. We don't
use device tree which is pretty much required by mipi_dsi_host_register
and friends, and we don't have the kind of device model the functions
expect either. So we cheat and use it as a library to abstract what we
need: a nice, clean interface for DSI transfers. This means we will have
to be careful with what functions we call, as the driver model devices
in mipi_dsi_host and mipi_dsi_device will *not* be initialized.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-By: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-29 16:51:39 +01:00
Jani Nikula
593e0622f4 drm/i915/dsi: switch to drm_panel interface
Replace intel_dsi_device and intel_dsi_dev_ops with drm_panel and
drm_panel_funcs. They are adequate for what we have now, and if we end
up needing more than this we should improve drm_panel. This will keep us
better aligned with the drm core infrastructure.

The panel driver initialization changes a bit. It still remains hideous,
but fixing that is beyond the scope here.

v2: extend mode config mutex to cover drm_panel_get_modes (Shobhit)
    vbt_panel->intel_dsi = intel_dsi in vbt panel init (Shobhit)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-By: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-29 16:51:13 +01:00
Sonika Jindal
e3d9984510 drm/i915/skl: Enabling PSR on Skylake
Mainly taking care of some register offsets, otherwise things are similar to
hsw. Also, programming ddi aux to use hardcoded values for psr data select.

v2: introduce  EDP_PSR_AUX_BASE macro (Chris)
v3: Moving to HW tracking for SKL+ platforms, so activating source psr during
psr_enabling and then avoiding psr entries and exits for each frontbuffer
updates.
v4: Using SKL DDI AUX regs instead of changing PSR_AUX regs definition (Rodrigo)

Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[danvet: Drop the hunks to short-circuit sw tracking: We'd need to
push this down one level, and I don't fully trust the test coverage
yet to do so. So much prefer we pick a whitelist approach for the
cases we know work correctly.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-28 17:22:29 +01:00
Chris Wilson
a50940510e Revert "drm/i915: Fix mutex->owner inspection race under DEBUG_MUTEXES"
The core fix was applied in

commit a63b03e2d2
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Jan 6 10:29:35 2015 +0000

    mutex: Always clear owner field upon mutex_unlock()

(note the absence of stable@ tag)

so we can now revert our band-aid commit 226e5ae9e5 for -next.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-28 17:22:28 +01:00
Mika Kuoppala
20e28fba48 drm/i915: Be consistent on printing seqnos
We have had %x and %u intermixed. Bring everything in line and
use %x

Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-28 17:22:28 +01:00
Chris Wilson
f654449a28 drm/i915: Display current hangcheck status in debugfs
For example,

/sys/kernel/debug/dri/0/i915_hangcheck_info:

Hangcheck active, fires in 15887800ms
render ring:
        seqno = -4059 [current -583]
        action = 2
        score = 0
        ACTHD = 1ee8 [current 21f980]
        max ACTHD = 0

v2: Include expiration ETA. Can anyone spot a problem?
v3: Convert for workqueued hangcheck (Mika)
v4: Print seqnos as unsigned ints (Ville)
v5: Print seqnos as hex (Chris)

Tested-By: PRC QA PRTS (Patch Regression Test System Contact: shuang.he@intel.com) (v2)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v2)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-28 17:22:27 +01:00
Chris Wilson
737b150603 drm/i915: Convert hangcheck from a timer into a delayed work item
When run as a timer, i915_hangcheck_elapsed() must adhere to all the
rules of running in a softirq context. This is advantageous to us as we
want to minimise the risk that a driver bug will prevent us from
detecting a hung GPU. However, that is irrelevant if the driver bug
prevents us from resetting and recovering. Still it is prudent not to
rely on mutexes inside the checker, but given the coarseness of
dev->struct_mutex doing so is extremely hard.

Give in and run from a work queue, i.e. outside of softirq.

v2: Use own workqueue to avoid deadlocks (Daniel)
    Cleanup commit msg and add comment to i915_queue_hangcheck() (Chris)

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <dnaiel.vetter@ffwll.chm>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
[danvet: Remove accidental kerneldoc comment starter, to appease the 0
day builder.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-28 17:22:12 +01:00
Kumar Amit Mehta
cea3bf81af drivers: gpu: drm: i915: intel_fifo_underrun.c: Fix a typo in comment
The comment for intel_cpu_fifo_underrun_irq_handler() is not consistent
with the code and the rest of the comment for this routine. This patch
fixes this typo in comment.

Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-27 10:30:01 +01:00
Matt Roper
b2e7723b09 drm/i915: Add i915.nuclear_pageflip command line param to force atomic (v4)
We don't have full atomic modeset support yet, but the "nuclear
pageflip" subset of functionality (i.e., plane operations only) should
be ready.  Allow the user to force atomic on for debug purposes, or for
fixed-purpose embedded devices that will only use atomic for plane
updates.

The term 'nuclear' is used here instead of 'atomic' to make it clear
that this doesn't allow full atomic modeset support, just a (very
useful) subset of the atomic functionality.

We'll drop the kernel parameter and unconditionally enable atomic in a
future patch once all of the necessary pieces are in.

v2:
 - Use module_param_named_unsafe() (Daniel)
 - Simplify comment on DRIVER_ATOMIC guard (Daniel)

v3:
 - Make the parameter "nuclear_pageflip" rather than just "nuclear"
   for clarity. (Ander)

v4:
 - Make the internal variable "nuclear_pageflip" as well as the
   command-line option. (Ander)

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-27 09:57:34 +01:00
Matt Roper
c196e1d66c drm/i915: Switch plane properties to full atomic helper.
This will exercise our atomic pipeline for legacy property updates.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-27 09:57:25 +01:00
Matt Roper
1356837e55 drm/i915: Add crtc state duplication/destruction functions
The atomic helpers need these to prepare a new state object when
starting a new atomic operation.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-27 09:57:18 +01:00
Matt Roper
2545e4a6c8 drm/i915: Add atomic_get_property entrypoint for connectors (v2)
Even though we only support atomic plane updates at the moment, we still
need to add an .atomic_get_property() entrypoint for connectors before
we allow the driver to flip on the DRIVER_ATOMIC bit.  As soon as that
bit gets set, the DRM core will start adding atomic connector properties
(in addition to the plane properties we care about at the moment), so we
need to be able to handle the new way the DRM core will interact with
us.

For simplicity, we just lookup driver-specific connector properties in
the usual shadow array maintained by the core.  Once we get real atomic
modeset support for crtc's and planes, this code should be re-written to
pull the data out of crtc/connector state structures.

v2: Fix intel_dvo and intel_dsi that I missed on the first pass (Ander)

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-27 09:57:10 +01:00
Matt Roper
c6f95f2793 drm/i915: Setup dummy atomic state for connectors (v3)
We want to enable/test plane updates via the atomic interface, but as
soon as we flip DRIVER_ATOMIC on, the DRM core will take some atomic
codepaths to lookup properties during drmModeGetConnector() and some of
those codepaths unconditionally dereference connector->state
(specifically when looking up the CRTC ID property in
drm_atomic_connector_get_property()).  Create a dummy connector state
for each connector at init time to ensure the DRM core doesn't try to
dereference a NULL connector->state.  The actual connector properties
will never be updated or contain useful information, but since we're
doing this specifically for testing/debug of the plane operations (and
only when a specific kernel module option is given), that shouldn't
really matter.

Once we start creating connector states, the DRM core will want to be
able to clean them up for us.  We also need to hook up the destruction
entrypoint to the core's helper.

v2: Squash in the patch to set the state destruction hook (Ander & Bob)

v3: Only create dummy connector states when we're actually faking
    atomic support.  (Ander)

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-27 09:57:02 +01:00
Matt Roper
5ee67f1cf9 drm/i915: Add main atomic entrypoints (v2)
Add the top-level atomic entrypoints for check/commit.  These won't get
called yet; we still need to either enable the atomic ioctl or switch to
using the non-transitional atomic helpers for legacy operations.

v2:
 - Use plane->pipe rather than plane->possible_crtcs while ensuring that
   only a single CRTC is in use.  Either way will work fine since i915
   drm_plane's are always tied to a single CRTC, but plane->pipe is
   slightly more intuitive. (Ander)
 - Simplify crtc/connector checking logic. (Ander)

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-27 09:56:46 +01:00
Matt Roper
a98b3431af drm/i915: Add .atomic_{get, set}_property() entrypoints to planes
When we flip on the DRIVER_ATOMIC bit, the DRM core will start calling
this entrypoint to set and lookup driver-specific plane property values,
rather than maintaining a shadow copy in object->properties.

Note that although we add these functions to the plane vtable, they will
not yet be called.  Future patches that switch our .set_property()
handler and/or enable full atomic functionality are required before
these code paths will be executed.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-27 09:56:15 +01:00
Matt Roper
65a3fea0a6 drm/i915: Consolidate plane handler vtables
All of the previous refactoring/consolidation of plane code has resulted
in intel_primary_plane_funcs, intel_cursor_plane_funcs, and
intel_sprite_plane_funcs being identical.  Replace all of these with a
single 'intel_plane_funcs' vtable for simplicity.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-27 09:51:18 +01:00
Matt Roper
8e7d688b7a drm/i915: Move rotation from intel_plane to drm_plane_state
Runtime state that can be manipulated via properties should now go in
intel_plane_state/drm_plane_state so that it can be tracked as part of
an atomic transaction.

We add a new 'intel_create_plane_state' function so that the proper
initial value for this property (and future properties) doesn't have to
be repeated at each plane initialization site.

v2:
 - Stick rotation in common drm_plane_state rather than
   intel_plane_state. (Daniel)
 - Add intel_create_plane_state() to consolidate the places where we
   have to set initial state values.  (Ander)

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-27 09:51:18 +01:00
Ville Syrjälä
7c59a9c133 drm/i915: Use intel_gpu_freq() and intel_freq_opcode()
Replace all the vlv_gpu_freq(), vlv_freq_opcode(),
*GT_FREQUENCY_MULTIPLIER, and /GT_FREQUENCY_MULTIPLIER instances
with intel_gpu_freq() and intel_freq_opcode() calls.

Most of the change was performed with the following semantic patch:
@@
expression E;
@@
(
- E * GT_FREQUENCY_MULTIPLIER
+ intel_gpu_freq(dev_priv, E)
|
- E *= GT_FREQUENCY_MULTIPLIER
+ E = intel_gpu_freq(dev_priv, E)
|
- E /= GT_FREQUENCY_MULTIPLIER
+ E = intel_freq_opcode(dev_priv, E)
|
- do_div(E, GT_FREQUENCY_MULTIPLIER)
+ E = intel_freq_opcode(dev_priv, E)
)

@@
expression E1, E2;
@@
(
- vlv_gpu_freq(E1, E2)
+ intel_gpu_freq(E1, E2)
|
- vlv_freq_opcode(E1, E2)
+ intel_freq_opcode(E1, E2)
)

@@
expression E1, E2, E3, E4;
@@
(
- if (IS_VALLEYVIEW(E1)) {
-  E2 = intel_gpu_freq(E3, E4);
- } else {
-  E2 = intel_gpu_freq(E3, E4);
- }
+ E2 = intel_gpu_freq(E3, E4);
|
- if (IS_VALLEYVIEW(E1)) {
-  E2 = intel_freq_opcode(E3, E4);
- } else {
-  E2 = intel_freq_opcode(E3, E4);
- }
+ E2 = intel_freq_opcode(E3, E4);
)

One hunk was manually undone as intel_gpu_freq() ended up
calling itself. Supposedly it would be possible to exclude
certain functions via !=~, but I couldn't get that to work.

Also the removal of vlv_gpu_freq() and vlv_opcode_freq() compat
wrappers was done manually.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-27 09:51:17 +01:00
Ville Syrjälä
616bc8202d drm/i915: Add intel_gpu_freq() and intel_freq_opcode()
Rename the vlv_gpu_freq() and vlv_freq_opecode() functions to have
an intel_ prefix, and handle non-VLV/CHV platforms in them as well.
Leave the vlv_ names around for now since they're currently used.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-27 09:51:17 +01:00
Ville Syrjälä
c8c972ebd2 drm/i915: Add gt_act_freq_mhz sysfs file
Currently the 'gt_cur_freq_mhz' file shows the actual GPU frequency on
VLV/CHV, and the last requested frequency on other platforms. Change the
meaning of the file on VLV/CHV to follow the the other platforms, and
introduce a new file 'gt_act_freq_mhz' which shows the actual frequency
on all platforms.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-27 09:51:16 +01:00
Ville Syrjälä
f745a80e34 drm/i915: Update PMINTRMSK on VLV/CHV after sysfs min/max freq change
Currently we don't call valleyview_set_rps() when changing the min/max
limits through sysfs if the current frequency is still within the new
limits. However that means we sometimes forget to update PMINTRMSK.
Eg. if the current frequency is at the old minimum, and then we reduce
the minum further we should then enable the 'down' interrupts in PMINTRMSK
but currently we don't.

Fix it up by always calling valleyview_set_rps() (just like we do for
!vlv/chv platforms). This also allows the code to be simplified a bit.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-27 09:51:16 +01:00
Vandana Kannan
a93fad0f7f drm/i915: DRRS calls based on frontbuffer
Calls have been added to invalidate/flush DRRS whenever invalidate/flush is
called as part of frontbuffer tracking.
Apart from calls as a result of GEM tracking to fb invalidate/flush, a
call has been added to invalidate fb obj from crtc_page_flip as well. This
is to track busyness through flip calls.
The call to fb_obj_invalidate (in flip) is placed before queuing flip for this
obj.

drrs_invalidate() and drrs_flush() check for drrs.dp which would be NULL if
it was setup in drrs_enable(). This covers for the condition when DRRS is
not supported.

v2: Removing the call to invalidate_drrs from page_flip.
This has not been tested on Android yet, but, in case DRRS transtions do not
work as expected, check by adding back this call in page_flip.

Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-27 09:51:15 +01:00
Vandana Kannan
c395578e98 drm/i915: Enable/disable DRRS
Calling enable/disable DRRS when enable/disable DDI are called.
These functions are responsible for setup of drrs data (in enable) and
reset of drrs (in disable).
has_drrs is true when downclock_mode is found and SEAMLESS_DRRS is set in
the VBT. A check has been added for has_drrs in these functions, to make
sure the functions go through only if DRRS will work on the platform with
the attached panel.

V2: [By Ram]: WARN_ON is used when intel_edp_drrs_enable() is called more than
once [Rodrigo]

Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-27 09:51:15 +01:00
Vandana Kannan
4e9ac947c7 drm/i915: Initialize DRRS delayed work
Add DRRS work function to trigger a switch to low refresh rate,
when no activity is detected on screen till 1 sec duration.

v2: [By Ram]: drrs.dp also protected with drrs.mutex and worker function
is renamed to intel_edp_drrs_downclock_work [Chris]

Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-27 09:51:14 +01:00
Daniel Vetter
b2c5c181ed drm/i915: Use symbolic irqreturn for ->hpd_pulse
Self-explanatory code is better code.

Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-27 09:51:14 +01:00
Jani Nikula
5b48ca0f52 drm/i915/dsi: add some constness to vbt panel driver
Const is good for you. No functional changes.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-By: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-27 09:51:13 +01:00
Jani Nikula
36d21f4c55 drm/i915/dsi: remove unnecessary dsi device callbacks
Remove all the trivial and/or dummy callbacks from intel dsi device
ops. Merge send_otp_cmds into panel_reset as they're called back to
back.

This will be helpful for switching to use drm_panel for the
callbacks. If we ever need the additional callbacks, we should add them
to drm_panel funcs.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-By: Shobhit Kumar <shobhit.kumar@intel.com>
[danvet: Resolve tiny conflict with ongoing atomic work.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-27 09:51:13 +01:00
Jani Nikula
7f6a6a4a19 drm/i915/dsi: call wait_for_dsi_fifo_empty() for each dsi port
Add port parameter to wait_for_dsi_fifo_empty, and call it for each dsi
port.

We can now remove the transitional intel_dsi_pipe_to_port() function.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-By: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-27 09:51:12 +01:00
Jani Nikula
3b1808bf56 drm/i915/dsi: move wait_for_dsi_fifo_empty to intel_dsi.c
wait_for_dsi_fifo_empty can be static in intel_dsi.c. No functional
changes.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-By: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-27 09:51:12 +01:00
Jani Nikula
4934b65682 drm/i915/dsi: set max return packet size for each dsi port
This seems like the right thing to do. This also gets rid of a call to
intel_dsi_pipe_to_port() which we want to remove eventually.

v2: add braces to fix else logic (Shobhit)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-By: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-27 09:51:11 +01:00
Jani Nikula
f03e4179ce drm/i915/dsi: call dpi_send_cmd() for each dsi port at a higher level
Instead of having the for each dsi port loop within dpi_send_cmd(), add
a port parameter to the function and call it for each port instead.

This is a rewrite of

commit 4510cd779e
Author: Gaurav K Singh <gaurav.k.singh@intel.com>
Date:   Thu Dec 4 10:58:51 2014 +0530

    drm/i915: Dual link needs Shutdown and Turn on packet for both ports

to add more flexibility in using dpi_send_cmd() for just one port as
necessary. No functional changes.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-By: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-27 09:51:11 +01:00
Ville Syrjälä
da2518f926 drm/i915: Change VLV WIZ hashing mode to 16x4
We set the WIZ hashing mode to 16x4 for all the other gen6+
platfotrms, so let's follow suit on VLV.

My VLV is AWOL currently so I didn't test this, but since the results
for all the other platforms agree that 16x4 is the fastest we might
assume the same holds for VLV.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-27 09:51:10 +01:00
Ville Syrjälä
e7fc24362c drm/i915: Change CHV WIZ hashing mode to 16x4
I ran a few tests with xonotic and synmark2 trying out the
different WIZ hashing modes on CHV. The results seem to match the
results I got with IVB/HSW when I did the similar tests on them
in the past. That is 16x4 is generally the fastest mode, 8x8 comes
next and finally 8x4. On CHV the difference between the modes is
at most ~1% in most tests. IIRC on IVB/HSW the difference was a little
bigger, but as there doesn't seem to be any real downside to 16x4
let's use it by default.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-27 09:51:10 +01:00