The PCIe host bridge has two interrupt lines, one that goes towards it
PCIE_INTR2 second level interrupt controller and one for its MSI second
level interrupt controller. The first interrupt line is not currently
managed by the driver, which is why it was not a functional problem.
The interrupt-map property was also only listing the PCI_INTA interrupts
when there are also the INTB, C and D.
Reported-by: Jim Quinlan <jim2101024@gmail.com>
Fixes: d5c8dc0d4c ("ARM: dts: bcm2711: Enable PCIe controller")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The GPIO controller is also an interrupt controller provider and is
currently missing the appropriate 'interrupt-controller' and
'#interrupt-cells' properties to denote that.
Fixes: fb026d3de3 ("ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The I2C interrupt controller line is off by 32 because the datasheet
describes interrupt inputs into the GIC which are for Shared Peripheral
Interrupts and are starting at offset 32. The ARM GIC binding expects
the SPI interrupts to be numbered from 0 relative to the SPI base.
Fixes: bb097e3e00 ("ARM: dts: BCM5301X: Add I2C support to the DT")
Tested-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
5.16-rc1.
Nothing major in here, just lots of little cleanups and additions for
new hardware, all of which have been in linux-next for a while with no
reported problems.
Included in here are:
- tiny Thunderbolt driver updates
- USB typec driver updates
- USB serial driver updates
- USB gadget driver updates
- dwc2 and dwc3 controller driver updates
- tiny USB host driver updates
- minor USB driver fixes and updates
- USB dts updates for various platforms"
* tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (123 commits)
usb: gadget: Mark USB_FSL_QE broken on 64-bit
usb: gadget: f_mass_storage: Disable eps during disconnect
usb: gadget: udc: core: Revise comments for USB ep enable/disable
USB: serial: keyspan: fix memleak on probe errors
USB: serial: cp210x: use usb_control_msg_recv() and usb_control_msg_send()
USB: serial: ch314: use usb_control_msg_recv()
USB: iowarrior: fix control-message timeouts
Documentation: USB: fix example bulk-message timeout
usb: dwc2: stm32mp15: set otg_rev
usb: dwc2: add otg_rev and otg_caps information for gadget driver
dt-bindings: usb: dwc2: adopt otg properties defined in usb-drd.yaml
dt-bindings: usb: dwc2: Add reference to usb-drd.yaml
usb: gadget: uvc: implement dwPresentationTime and scrSourceClock
usb: gadget: uvc: use on returned header len in video_encode_isoc_sg
usb:gadget: f_uac1: fixed sync playback
Docs: usb: remove :c:func: for usb_register and usb_deregister
Docs: usb: update struct usb_driver
usb: gadget: configfs: change config attributes file operation
usb: gadget: configfs: add cfg_to_gadget_info() helper
usb: dwc3: Align DWC3_EP_* flag macros
...
Pull ARM SoC DT updates from Arnd Bergmann:
"This is a rather large update for the ARM devicetree files, after a
few quieter releases, with 775 total commits and 47 branches pulled
into this one.
There are 5 new SoC types plus some minor variations, and a total of
60 new machines, so I'm limiting the summary to the main noteworthy
items:
- Apple M1 gain support for PCI and pinctrl, getting a bit closer to
a usable system out of the box.
- Qualcomm gains support for Snapdragon 690 (aka SM6350) as well as
SM7225, 11 new smartphones, and three additional Chromebooks, and
improvements all over the place.
- Samsung gains support for ExynosAutov9, an automotive version of
their smartphone SoC, but otherwise no major changes.
- Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a number
of improvements for the recently added SAMA7 family. The LAN966 SoC
that was added in the platform code does not have dts files yet.
Two board files are added for the older at91sam9g20 SoC
- Aspeed supports two additional server boards using their AST2600 as
BMC, and improves support for qemu models
- Rockchip RK3566/RK3688 gets added, along with six new development
boards using RK3328/RK3399/RK3566, and one Chromebook tablet.
- Two NAS boxes are added using the ARMv4 based Gemini platform
- One new board is added to the Intel Arria SoC FPGA family
- Marvell adds one network switch based on Armada 381 and the new
MOCHAbin 7040 development board
- NXP adds support for the S32G2 automotive SoC, two imx6 based ebook
readers, and three additional development boards, which is notably
less than their usual additions, but they also gain improvements to
their many existing boards
- STmicroelectronics adds their stm32mp13 SoC family along with a
reference board
- Renesas adds new versions of their R-Car Gen3 SoCs and many updates
for their older generations
- Broadcom adds support for a number of Cisco Meraki wireless
controllers, along with two new boards and other updates for
BCM53xx/BCM47xx networking SoCs and the Raspberry Pi boards
- Mediatek improves support for the MT81xx SoCs used in Chromebooks
as well as the MT76xx networking SoCs
- NVIDIA adds a number of cleanups and additional support for more
hardware on the already supported machines
- TI K3 adds support for three new boards along with cleanups
- Toshiba adds one board for the Visconti family
- Xilinx adds five new ZynqMP based machines
- Amlogic support is added for the Radxa Zero and two Jethub home
automation controllers, along with changes to other machines
- Rob Herring continues his work on fixing dtc warnings all over the
tree.
- Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon,
Ux500, Unisoc"
* tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (720 commits)
arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address
arm64: dts: apple: t8103: Add root port interrupt routing
arm64: dts: apple: t8103: Add PCIe DARTs
arm64: apple: Add PCIe node
arm64: apple: Add pinctrl nodes
ARM: dts: arm: Update ICST clock nodes 'reg' and node names
ARM: dts: arm: Update register-bit-led nodes 'reg' and node names
arm64: dts: exynos: add chipid node for exynosautov9 SoC
ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node
Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors"
arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node
arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property
arm64: dts: qcom: sm8350: Add CPU topology and idle-states
arm64: dts: qcom: Drop unneeded extra device-specific includes
arm64: dts: qcom: msm8916: Drop standalone smem node
arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes
arm64: dts: qcom: msm8916-asus-z00l: Add sensors
arm64: dts: qcom: msm8916-asus-z00l: Add SDCard
arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen
arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node
...
Pull devicetree updates from Rob Herring:
- Convert /reserved-memory bindings to schemas
- Convert a bunch of NFC bindings to schemas
- Convert bindings to schema: Xilinx USB, Freescale DDR controller, Arm
CCI-400, UBlox Neo-6M, 1-Wire GPIO, MSI controller, ASpeed LPC, OMAP
and Inside-Secure HWRNG, register-bit-led, OV5640, Silead GSL1680,
Elan ekth3000, Marvell bluetooth, TI wlcore, TI bluetooth, ESP
ESP8089, tlm,trusted-foundations, Microchip cap11xx, Ralink SoCs and
boards, and TI sysc
- New binding schemas for: msi-ranges, Aspeed UART routing controller,
palmbus, Xylon LogiCVC display controller, Mediatek's MT7621 SDRAM
memory controller, and Apple M1 PCIe host
- Run schema checks for %.dtb targets
- Improve build time when using DT_SCHEMA_FILES
- Improve error message when dtschema is not found
- Various doc reference fixes in MAINTAINERS
- Convert architectures to common CPU h/w ID parsing function
of_get_cpu_hwid().
- Allow for empty NUMA node IDs which may be hotplugged
- Cleanup of __fdt_scan_reserved_mem()
- Constify device_node parameters
- Update dtc to upstream v1.6.1-19-g0a3a9d3449c8. Adds new checks
'node_name_vs_property_name' and 'interrupt_map'.
- Enable dtc 'unit_address_format' warning by default
- Fix unittest EXPECT text for gpio hog errors
* tag 'devicetree-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (97 commits)
dt-bindings: net: ti,bluetooth: Document default max-speed
dt-bindings: pci: rcar-pci-ep: Document r8a7795
dt-bindings: net: qcom,ipa: IPA does support up to two iommus
of/fdt: Remove of_scan_flat_dt() usage for __fdt_scan_reserved_mem()
of: unittest: document intentional interrupt-map provider build warning
of: unittest: fix EXPECT text for gpio hog errors
of/unittest: Disable new dtc node_name_vs_property_name and interrupt_map warnings
scripts/dtc: Update to upstream version v1.6.1-19-g0a3a9d3449c8
dt-bindings: arm: firmware: tlm,trusted-foundations: Convert txt bindings to yaml
dt-bindings: display: tilcd: Fix endpoint addressing in example
dt-bindings: input: microchip,cap11xx: Convert txt bindings to yaml
dt-bindings: ufs: exynos-ufs: add exynosautov9 compatible
dt-bindings: ufs: exynos-ufs: add io-coherency property
dt-bindings: mips: convert Ralink SoCs and boards to schema
dt-bindings: display: xilinx: Fix example with psgtr
dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yaml
dt-bindings: Add a help message when dtschema tools are missing
dt-bindings: bus: ti-sysc: Update to use yaml binding
dt-bindings: sram: Allow numbers in sram region node name
dt-bindings: display: Document the Xylon LogiCVC display controller
...
Qualcomm ARM64 DTS additional patches for v5.16
The RPM and RPMh sleep stats are introduced on a number of platforms, to
aid the enablement of entering low power mode.
The MSM8916 support receives some polishing touches, followed by
introduction of the necessary pieces to use the DeviceTree on 32-bit
variants of the MSM8916 platform, in particular to boot the secondary
CPUs. Based on this support for the Samsung Galaxy S4 Mini Value Edition
is introduced.
The Asus Zenfone 2 Laser gained touchscreen, sensors and sdcard support.
MSM8996 got support for the its crypto hardware and the Xiaomi Mi 5
gained a description of its LCD panel.
The Trogdor device on SC7180 gained support for a second source eDP
brigde, while SC7280 gains PCIe support and the newly introduced
Herobrine device.
Both MSM8916 and SDM845 has their standalong SMEM node dropped, in favour
of the newly introduced support for specifying the compatible directly
on the reserved-memory node.
The SM7225 platform is introduced, as a derrivative of SM6350, initial
support for the PM6350 PMIC and based on this the Fairphone 4 is
introduced.
The RB3 and RB5 devices gains msm-id and board-id, to allow the two DTBs
to be baked into a single boot.img that can be booted on both devices.
As the GDSC driver has been extended to properly describe the
relationship between MMCX and MDSS_GDSC, the now deprecated mmcx
regulator is removed from SM8250.
SM8350 gained CPU topology, idle-states and fastrpc support. FastRPC was
also added for SM8150 and the SA8155p ADP got a couple of remoteprocs
enabled.
Additionally a number of DT validation issues was corrected across the
various platforms and devices.
* tag 'qcom-arm64-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (77 commits)
Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors"
arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node
arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property
arm64: dts: qcom: sm8350: Add CPU topology and idle-states
arm64: dts: qcom: Drop unneeded extra device-specific includes
arm64: dts: qcom: msm8916: Drop standalone smem node
arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes
arm64: dts: qcom: msm8916-asus-z00l: Add sensors
arm64: dts: qcom: msm8916-asus-z00l: Add SDCard
arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen
arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node
arm64: dts: qcom: sdm845: Fix Qualcomm crypto engine bus clock
arm64: dts: qcom: msm8996: Add device tree entries to support crypto engine
arm64: dts: qcom: msm8996: move clock-frequency from PN547 NFC to I2C bus
arm64: dts: qcom: msm8916-asus-z00l: Add sensors
arm64: dts: qcom: sdm630: Add disabled Venus support
arm64: dts: qcom: pm660l: Remove board-specific WLED configuration
arm64: dts: qcom: Move WLED num-strings from pmi8994 to sony-xperia-tone
arm64: dts: qcom: pmi8994: Remove hardcoded linear WLED enabled-strings
arm64: dts: qcom: pmi8994: Fix "eternal"->"external" typo in WLED node
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
AT91 DT #2 for 5.16:
- Add DT nodes for TCB and RTC blocks on SAMA7G5
- Add TCB0 for clocksource and clockevent functionality fallback only in
case PIT64B will fail to probe and as a testbed for this feature on
the Evaluation Kit.
* tag 'at91-dt-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama7g5-ek: use blocks 0 and 1 of TCB0 as cs and ce
ARM: dts: at91: sama7g5: add tcb nodes
ARM: dts: at91: sama7g5: add rtc node
Link: https://lore.kernel.org/r/20211025163428.26285-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Rename thermal zones according to dt-schema.
Fix warnings like:
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml: thermal-zones: 'cpu-thermal0', 'cpu-thermal1', 'cpu-thermal2', 'cpu-thermal3' do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/thermal/thermal-zones.yaml
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211020180002.195467-1-david@ixit.cz
rename node to comply with dt-schema
Fix warning:
arch/arm/boot/dts/qcom-ipq8064-rb3011.dt.yaml: s25fl016k@0: $nodename:0: 's25fl016k@0' does not match '^flash(@.*)?$'
From schema: Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211020204145.235050-1-david@ixit.cz
MMC nodes has to be named mmc@ to comply with dt-bindings.
Fix warnings as:
arch/arm/boot/dts/qcom-msm8660-surf.dt.yaml: sdcc@12400000: $nodename:0: 'sdcc@12400000' does not match '^mmc(@.*)?$'
From schema: Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211020201440.229196-1-david@ixit.cz
'#clock-cells' is a required property of QMP PHY child node, not itself.
Drop it to fix the dtbs_check warnings below.
qcom-sdx55-t55.dt.yaml: phy@ff6000: '#clock-cells' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
qcom-sdx55-mtp.dt.yaml: phy@ff6000: '#clock-cells' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
qcom-sdx55-telit-fn980-tlb.dt.yaml: phy@ff6000: '#clock-cells' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210929034253.24570-11-shawn.guo@linaro.org
After adding all necessary support for MSM8916 SMP/cpuidle without PSCI
on ARM32, build the Samsung Galaxy S4 Mini VE device tree from the arm64
tree together with the ARM32 include to allow booting this device on ARM32.
The approach to include device tree files from other architectures is
inspired from e.g. the Raspberry Pi (bcm2711-rpi-4-b.dts) where this is
used to build the device tree for both ARM32 and ARM64.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211004204955.21077-15-stephan@gerhold.net
Rainier was missed when enabling all of the other machines in
commit 239566b032 ("ARM: dts: aspeed: Set earlycon boot argument").
Signed-off-by: Joel Stanley <joel@jms.id.au>
These were meant to be part of commit 4fb27b3f91 ("ARM: dts: aspeed:
rainier: Add system LEDs") but went missing.
Signed-off-by: Joel Stanley <joel@jms.id.au>
The state of this GPIO determines whether a factory reset has been
requested. If a physical switch is used, it can be high or low. During boot,
the software checks and records the state of this switch. If it is different
than the previous recorded state, then the read-write portions of memory are
reformatted.
Signed-off-by: Isaac Kurth <isaac.kurth@ibm.com>
Reviewed-by: Adriana Kobylak <anoo@us.ibm.com>
Link: https://lore.kernel.org/r/20210714214741.1547052-1-blisaac91@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
The MCTP LPC driver was loaded by hacking up the compatible in the
devicetree node for KCS 4. With the introduction of the raw KCS driver
this hack is no-longer required. Use the regular compatible string for
KCS 4 and configure the appropriate SerIRQ.
The reset state of the status bits on KCS 4 is inappropriate for the
MCTP LPC binding. Switch to KCS 3 which has a different reset behaviour.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Set I2C bus 14 to multi-master mode and add the panel device that will
register the I2C controller as a slave device.
In addition, in early Everest systems, the panel device was behind an
I2C switch, which doesn't work for slave mode. Get it working (albeit
unreliably, since a master transaction might switch the switch at any
moment) by defaulting the switch channel to the one with the panel.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20211020215321.33960-5-eajames@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Changes for omap gpmc bindings and devicetree files for v5.16
A series of changes to update the gpmc related bindings to yaml
format, and a few non-urgent dts fixes.
* tag 'omap-for-v5.16/gpmc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap: fix gpmc,mux-add-data type
ARM: dts: omap: Fix boolean properties gpmc,cycle2cycle-{same|diff}csen
dt-bindings: memory-controllers: ti,gpmc: Convert to yaml
dt-bindings: mtd: ti,gpmc-onenand: Convert to yaml
dt-bindings: mtd: ti,gpmc-nand: Convert to yaml
dt-bindings: memory-controllers: Introduce ti,gpmc-child
dt-bindings: net: Remove gpmc-eth.txt
dt-bindings: mtd: Remove gpmc-nor.txt
Link: https://lore.kernel.org/r/pull-1634280279-284035@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
